General requirements for male and female uniforms

Transcription

1 General requirements for male and female uniforms Style no: 10001, 10002, 10003, 20001, 20002, 20003, 10022, 20021, 20022, Page: 1 of All specifications, requirements and patterns are oned by Region Midtjylland.

2 Page: 2 of 14 Index 1.0 Material standard specifications Material and product specifications Specifications for change of surface REACH Colour Specifications Trimmings Seing thread Push-buttons Zippers Elastic band Elastic band ith logo Strap/band Sizerange Labelling Labelling ith identity and size printed on garments Manufacturing Technical draings Cutting Seing Care labels Finish Measurement Tolerances for tops & trousers Packing Test sampling Copyright Body measurements and ho to identify sizes... 14

3 Page: 3 of 14 All specifications, requirements and patterns are oned by Region Midtjylland. Region Midtjyllands hospital uniforms must fulfil the general requirements and the specifications in the technical documentation for each style. All the uniforms must follo the standard sizes according to the measurment chart and be manufactured according to the technical instructions, technical draings and patterns. All trimming must fulfil the specified requirements in Trimming specifications, chapter 3. The fabric requirements for the each individual style is included in style documentation. The folloing general instructions must be applied to all styles listed in the top reference. 1.0 Material standard specifications Fabric Tests Demands Acceptable values at test sampling Squaremeter eight: ISO 3801: g/m2 +/- 3% Colour fastness to ash and chlorine DS/EN ISO 105-C06: 2010, Test D3S DS/EN N01: Grade: DS/EN A02:1997 White fabrics: Colour change 5 Colour change 5 Colour fastness to ashing DS/EN ISO 105-C06: 2010, Test E1S, 90 Grade: DS/EN A02:1997 DS/EN A03:1997 Coloured fabrics: Colour change 4-5 Staining 4-5 Colour fastness to rubbing DS/EN ISO 105-X12: 2002 Grade: DS/EN A02:1997 Colour fastness to perspiration DS/EN ISO 105-E04:2009 Grade: DS/EN A02:1997 DS/EN A03:1997 Tearing strength, DS/EN ISO :2000 Mean in Neton Tensile strength DS/EN ISO :1999 Mean in Neton Abrasion resistance DS/EN ISO :1999 Stress: : 9kPa (Meas: 2 threads are broken) Pilling martindale DS/EN ISO :2000 End note at Smoothness appearance DS/ISO 7768:1986 (durable press) Seam tolerance BS 3320:1988 (max. 3 mm seam slippage) Coloured fabrics: Colour fastness to dry rubbing 4-5 Colour fastness to et rubbing 4-5 Coloured fabrics: Colour fastness 4-5 Staining 4-5 Warp thread Weft thread 45 Neton 45 Neton 600 Neton rubs pilling 4 DP rating Neton - 3 N 50 N note 3-4 note 4-5 N Dimensional change in ashing: DS/EN ISO 5077:2008 Change in length: +/- 2% Markup: ISO 3759:2011 idth: +/- 2% Wash: DS/EN ISO 6330:2012, testno 1A,E - = shrinkage (90 C tumble dry) change in % + = expanding max. 3% max. 3%

4 Page: 4 of Material and product specifications All materials must resist industrial ashing at 92 C, 25 bar ater pressure, industrial steam pressure and tumbledry. No chemical acids knon to cause allergy-substance or similar nuisance are alloed in the garments. All uniforms must fulfil the requirements for the Oeko-Tex Standard 100: 2010 or the EU Ecolabel. Documention for the folloing values are requested: Free and partly hydrlysable formaldehyde Nickel PH-value 75 ppm 4 ppm 4,8-7,5 Free formaldehyde according to Japanese la no 112 dated October 12th Extractable heavy metals tested ith AAS (Atom Absorption Spektrometri) analysis of heavy metals including Nickel (Ni) in artificial persperation extract (ISO 105 E-04: 1994 (The method is comparable ith Øko-Tex Standard 200, section 3 and 3.1) PH-value according to ISO Specifications for change of surface after 25 ash and treatments Test Smoothness appearance, DS/EN ISO 15487:2010 Apperance of seams, DS/ISO 7770: 2009 Demands Smoothnessappearance, fabric 4 Smoothness, trimmings 4-5 Seams puckering, assembly seams 4-5 Seams puckering, hemlines 4-5 Seams puckering, decorative stitches 4-5 Acceptable values note 3-4 note 4 note 4 note 4 note 4 Seam tolerance, visual assessment Variation max. 2 mm Change of apperance: Wash DS/EN ISO 15487:2010 ISO 6330,1A, E Change of hite and coloured fastness Change of surface, pilling, fuzzing Fading of coloured fabrics Colour fastness 4-5 Change of surface 4 Staining on hite 5 Colour change 5 Colour fading to hite 4 note 4 note 3-4 note 5 note 4-5 note The textile fabrics have to meet the REACH directives

5 Page: 5 of Colour specifications The hite dye of the fabric must at all times comply ith the chosen standard hite from Region Midtjylland. All coloured fabrics must comply ith the specifications of each individual fabric requirements in style documentation. A relection spectrophotometer ill be used to measure colour variations in order to control the requested colour specification. Colour difference beteen standard lab-dip and the delivered colour sample ill be calculated according to CIE lab-system using the formel CMC 2:1 to define the de colour differences. The test ill be carried out using different types of light sources, as the light can effect visual impression. D65 is daylight CWF is fluorescent lamp Folloing test results must be applied: dl difference beteen to colours brightness dc difference beteen to colours chromatic values dh difference beteen to colours colour shades de the overall appearance for the measured colour differences must not exceed dh must not exceed 50% of the de value 3.0 Trimming The term Trimming defines all additional items attached to the garment. All metal trimming must comply to the requirements of European nickel restriction (EC) No 1907/2006 (REACH) Annex XVII and Oeko-tex Std 100, Class I. The standards for the required trimming is listed belo. For detailed specifications follo individual style documentation: trimming requirements. 3.1 Seing thread Thread must be supplied from a in Denmark generally accepted trademark. Fiber content: 100% polyester or core spun polyester/cotton Yarn Construction: Colour: Tone in tone for both asempling and decorative stitches. Quality: The thread must not change the dimensioning and surface appearance after min 100 times industrial ashing cycles ith drying presses. Colour fastness and stability must equal fabric specifications. 3.2 Push-button Push-buttons must be supplied from a in Denmark generally accepted trademark. Construction: Metal shell ith plastic core Material: Stainless steel ith flexible plastic core Colour: Stainless steel Quality: Push-buttons must be resistant against 25 bar press pressure. No nickel and corrosion is accepted. Push-buttons must keep the opening force intact throughout the duration of the garment (min 100 times ash cycles).

6 Page: 6 of Zippers Zippers must be supplied from a in Denmark generally accepted trademark. Construction: Size 3 Metal zipper ith auto-lock slider. Closed-end. Material: Slider: Zamac & Brass combination, plated Tape: Polyester Elements: Brass (oxidized) Colour: Tape must be tone in tone colour ith fabric. Quality: Chain Crossise Strength (N) Element Slippage Strength (N) 40.0 Element Pull-off Strength (N) 55.0 Slider Locking Strength (N) 40.0 Top Stop Holding Strength (N) 70.0 Bottom Stop Holding Strength (N) 50.0 Seperating Unit Crossise Str. (N) - Slider Pulltab Strength (N) Reciprocating (BS 3084/ Class B) (cycle) Elastic band Elastic band must be supplied from a in Denmark generally accepted trademark. Construction: Warp 14% polyester Weft 33% polyester Elastic threads 53% Natural rubber Non covered Weight per 100 m = 2330 gr Material: 35 mm polyester elastic Colour: White for hite + blue coloured garments Black for navy coloured garments Quality: Elasticity stretch 150% / N / KN Shrinkage max 5% Requirements: 170 c Tumbledry 92 c Wash 175 Steam pressure 3.4 Elastic band ith logo Elastic band ith logo must be supplied from a in Denmark generally accepted trademark. Construction: Warp xx% polyester Weft xx% polyester Elastic threads xx% Natural rubber Weight per 100 m = xxxx gr Material: 35 mm polyester elastic Colour: xxxxxxx for hite garments xxx for coloured garments Quality: Elasticity stretch 150% / N / KN Shrinkage max 5% Requirements: 170 c Tumbledry 92 c Wash 175 Steam pressure 4.0 Sizerange All garments must be manufactured in all standard sizes: female 2XS-6XL and male 2XS-6XL in the requested length differences. All garments must fulfil the requirements in the individual style documentation and measurement chart. Size variations must be ithin the specified tolerances.

7 Page: 7 of Labelling All garments must be individually labelled ith onership identity, size and care specification according to chapter 6.4. In left sideseam 15 cm from hemline and 15 cm from aist line a label informing: production month and year must be attached in the seam. The label must be readable throughout the duration of the garment. (min 100 times ash cycles). 5.1 Labelling ith identity and size printed on garments Gender: Female clothing must be printed ith Red colour Male clothing must be printed ith Medium Blue colour Styles: KKI = Kittel = style female male LKI = Kittel/kjole = style female BU = busseronne = style female BL = buks løs / loose fit trouser = style female male BS = buks tæt / moderate fit trouser = style female male BK = ¾ buks / 3/4 trouser = style female male Sizes: 2XS XS - S M L XL 2XL - 3XL - 4XL - 5XL - 6XL Length: 1 (short) 2 (mddle) 3 (long) Make a stroke beteen: Style Size - length Examples: LKI-M-3 BL-S-2 Red colour is a Female style; LKI= long hite coat, M= medium, 3=long Medium Blue colour is a Male style; BL= loose fit trouser, S=small, 2=middle length Product data Material: Pigment Print Durable for min. 100 ash cycles Dimensions and use: Design instructions ill be supplied from Region Midtjylland Each garment has individual size + identity print according to above codes The print must be durable under the belo mentioned requirements Properties Colour fastness to Perspiration Standard Methods Requirements Unit ISO 105 E-04 Staining: 4 Grade on grey scale Colour change: 4 (1-5, 5 best rating) Colour fastness to Washing ISO 105-C06, D1S Staining: 4 Colour change: 4 Grade on grey scale (1-5, 5 best rating) Colour fastness to Rubbing ISO 105-X12 Dry: 4 Wet: 3-4 Grade on grey scale (1-5, 5 best rating)

8 Page: 8 of Manufacturing The folloing section ill specify general standards for cutting, seing, finish and packing instructions. 6.1 Technical draings Symbols for technical draings used in the individual style descriptions. Description Technical draing Cross-section vie used for technical draings Flat draing vie used for detail illustrations Visible seam or decorative top stitch. Overlock stitch Backstitch Hidden line

9 Page: 9 of Technical draings...continued Symbols for technical draings used in the individual style descriptions. Description Technical draing scale 1:1 Fabric: black line Lining: blue line Elastic: Green line Broken line Zipper The distance beteen the fabric layers is 2 mm The distance beteen stitch and fabric layers is 2 mm All folds are dran as curves

10 Page: 10 of Technical draings...continued Symbols for technical draings used in the individual style descriptions. Stitch no. Description Technical draing scale 1: needle lockstitch needle double lockstitch thread overlock stitch X thread overlock stitch X thread safetystitch X 304 Bartack Z

11 Page: 11 of Cutting All pattern parts must be placed and cut according to the specified grainline. Tolerance for cutting the pattern parts +/- 1 mm. Supplier is obliged to use the patterns submitted by Region Midtjylland. No alterations are permitted ithout a ritten agreement from Region Midtjylland. 6.3 Seing Supplier is obliged to manufacture according to the individual style descriptions submitted by Region Midtjylland. No alterations are permitted ithout a ritten agreement from Region Midtjylland. The folloing is not accepted: No tacks/corrections are alloed on decorative top stitches. Broken stitches and open seams. Holes made by needles or other damages. Uneven stitches must not exceed the tolerances. Incorrect thread tension. Seam- ends longer than 0.2 cm. Overlock and safety seams must not exceed the tolerances. Seam assemling must not exceed the tolerance +/- 1 mm. Details All details identical left and right side must at all time be symmetrical. 6.4 Care labels All garments must be labelled ith correct care symbol instructions according to fabric specifications. POLYESTER 49% COTTON 49% EOL 2% POLYESTER 50% LYOCELL 50% POLYESTER 50% COTTON 50% Folding line Folding line Folding line Placement of care labels in tops Left side seam 15 cm up from hemline Placement of care labels in trousers Left side seam 15 cm up from hemline aistband POLYESTER 50% LYOCELL 50% 15 cm 15 cm hemline POLYESTER 50% LYOCELL 50%

12 Page: 12 of Finish Control according to the individual measurment charts and for broken seams, fabric spots, dirt and faults. Remove loose thread ends and stickers. Finish steam press. Control quality of push buttons and zippers in finish inspection. 7.0 Measurement Tolerances Control according to the individual measurment charts. No measures must exceed the belo listed Tolerances. Tolerances for tops measurements +/- cm Tolerances for trousers measurements +/- cm ½ chest idth 1.00 ½ aistband idth - stretched 1.00 ½ aist idth 1.00 ½ aistband idth centre front to elastic 0.25 ½ hem idth 1.00 Waistband centre idth back to elastic 0.50 High point shoulder to top of half belt level - back 0.50 Waistband elastic idth 0.50 Length centre back 1.00 Waistband height 0.20 Length front closure 1.00 ½ hip idth 1.00 Sleeve length from shoulder point 0.50 ½ thigh idth 0.50 Armhole depth measured straight 0.50 ½ knee idth 0.50 ½ sleeve hem / ½ cuff idth 0.50 ½ hem idth - ½ cuff idth 0.50 Shoulder to shoulder measured on the back 0.50 Inside leg length 1.00 Neck idth 0.20 Crotch depth front and back 0.50 Neck drop back. from high point shoulder 0.10 Centre back to dart at aistband 0.20 Neck drop front. from high point shoulder 0.20 Side pocket idth 0.50 Neck hole 0.50 Side pocket length 0.50 Collar height 0.10 Placement of side pocket according to drill marks 0.20 High point shoulder seam to breast pocket 0.20 Topstitch of fly according to template 0.10 Centre front to breast pocket 0.20 Adjustable straps idth and height 0.10 Distance beteen buttons 0.20 Placement of adjustable straps according to drill marks 0.10 Back pleat opening 0.50 Half belt length 0.50 Side pocket idth 0.50 Side pocket length 0.50 Chest pocket idth 0.20 Chest pocket length 0.20

13 Page: 13 of Packing All garments must be packed in bundles of xxx pieces and placed in xxxx boxes. Boxes must be placed in push-carts. Push carts must be clearly marked ith: name and adress of customer. 9.0 Test sampling At any time Region Midtjylland can demand documentation for the requirements and has the right to carry out spot testing. 9.1 Copyright These required specifications are elaborated by Region Midtjylland and are not alloed to be applicated by anyone else. When the agreement expire all the specifications, draings and patterns must be returned to Region Midtjylland.

14 Page: 14 of Body measurements and ho to identify sizes Body measurements MALE Body height 170 cm 2XS XS S M L XL 2XL 3XL 4XL 5XL 6XL Chest idth Waist idth Hip idth Inside leg length to floor Body height 182 cm 2XS XS S M L XL 2XL 3XL 4XL 5XL 6XL Chest idth Waist idth Hip idth Inside leg length to floor Bodu height 194 cm 2XS XS S M L XL 2XL 3XL 4XL 5XL 6XL Chest idth Waist idth Hip idth Inside leg length to floor Body measurements FEMALE Body height 156 cm 2XS XS S M L XL 2XL 3XL 4XL 5XL 6XL Chest idth Waist idth Hip idth Inside leg length to floor Body height 168 cm 2XS XS S M L XL 2XL 3XL 4XL 5XL 6XL Chest idth Waist idth Hip idth Inside leg length to floor Body height 180 cm 2XS XS S M L XL 2XL 3XL 4XL 5XL 6XL Chest idth Waist idth Hip idth Inside leg length to floor Inside leg length on trouser is 4 cm shorter than body measurements.