Technical Specifications

Transcription

1 Schedule B Technical Specifications Gujarat Energy Transmission Corporation Limited Year

2 Content 1. General Guidelines for Sourcing of Fabric Fabric Specifications List of Fabric Defects Specifications for Packing Distribution of Uniform Designs of Uniform (Design sketch of Fabric Pack)

3 General Guidelines for Sourcing of Fabrics 1. Fabric samples along with shade band and lab dips have to be approved prior to bulk production. 2. The shade band and lab dips will have to be approved before the commencement of fabric production. The shade will be matched visually. Any shade variation, from the approved shade will not be acceptable. 3. Test report will have to be attached along with samples. 4. All testing should be carried out by an independent accredited agency nominated by GETCO. 5. Lot wise Test report for the mentioned parameter will have to be submitted before dispatch of fabric 6. Fabric will be in the form of packed cut pieces as per specifications of Fabric pack No. 4/5/6/7/8 (Each applicable for the respective product) 7. Trims specified in the respective sheets are also to be enclosed in the same pack, refer fabric Pack No. 5 & 8 8. No fabric defect of any nature is permissible in the fabric pack, refer Annexure No Fabric has to comply with all the mentioned test standards 10. Packing is as per the Annexure No Each Fabric Pack must be traceable to the lot Number. 12. Shade variation within the same piece is strictly unacceptable. 13. The fabric will be accepted only after a pre dispatch inspection by an independent accredited agency nominated by GETCO 14. Any other guideline that might be laid down to ensure the best quality of fabric /garment/ trim/accessory being procured. 15. All types of Fabric designs are available at office of the CE(Project), Gujarat Energy Transmission Corporation Limited, 8 th Floor, Sardar Patel Vidyut Bhavan, Race Course Circle, Vadodara, Gujarat. 2

4 Fabric pack: 4 Fabric Specification Garment type: Kurta Category of staff: Length of fabric: Female 2.00 mts per pack Trim/ accessory: Dupatta as per Pack -6 Sketch of Design Yes Sr. No. Name of company Color code 1 GETCO As per Sample Page 4.1of 3 3

5 Fabric pack: 4 Fabric specifications Standard No. Tolerance Type CVC shirting Content/ composition 100% Cotton Weave Plain EPI (Finished) 140 +/- 5% PPI (Finished) 80 +/- 5% Yarn count Warp 50s 100% cotton Weft 50s 100% cotton Yarn Type Warp 100% Cotton Weft 100% Cotton Width 150 cm +/- 1 cm Weight in gms per sqm (GSM) 118 ASTM D /- 5% Crease Recovery Angle Warp + Weft >220 AATCC 66 +/- 2% Breaking Strength Warp 37.5 Kg on 20cmx5 cm ASTM D /- 5% strip, Kgf Weft 22 Kg Tear strength Warp 1000 gm Weft 780 gm ASTM-D-1424 Seam Slippage Warp Wt Kg 12 Weft Wt kg >20 ASTM D >7 Random Pilling Rating 4 ASTMD 3512 Page 4.2of 3 4

6 Fabric pack: 4 Fabric should confirm following quality standards: Tests Test Method Acceptable standard Fastness to sun light AATCC-16E C (Color Change) AATCC-61-2A C (Color Color fastness Change) AATCC Dry Rub AATCC-8 4 Wet Rub AATCC-8 3 Heat press AATCC Perspiration AATCC-15 4 DP Rating AATCC 124 +/- 1% Bow ASTM D % Skew (after 3 wash) AATCC % Absorbency Drop test <10 Sec Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever Page 4.3 of 3 5

7 Fabric pack: 5 Garment type: Salwar Category of staff: Length of fabric: Trim/ accessory: Sketch of Design Female 2.00 mts per pack Nil Yes Sr. No. Name of company Color code 1 GETCO As per Sample Page 5.1of 3 6

8 Fabric pack: 5 Fabric specifications Standard No. Tolerance Type CVC shirting Content/ composition 100% Cotton Weave Plain EPI (Finished) 140 +/- 5% PPI (Finished) 80 +/- 5% Yarn count Warp 50s 100% cotton Weft 50s 100% cotton Yarn Type Warp 100% Cotton Weft 100% Cotton Width 150 cm +/- 1 cm Weight in gms per sqm (GSM) 118 ASTM D /- 5% Crease Recovery Angle Warp + Weft >220 AATCC 66 +/- 2% Breaking Strength Warp 37.5 Kg on 20cmx5 cm ASTM D /- 5% strip, Kgf Weft 22 Kg Tear strength Warp 1000 gm Weft 780 gm ASTM-D-1424 Seam Slippage Warp Wt Kg 12 Weft Wt kg >20 ASTM D >7 Random Pilling Rating 4 ASTMD 3512 Page 5.2of 3 7

9 Fabric pack: 5 Fabric should confirm following quality standards: Tests Test Method Acceptable standard Fastness to sun light AATCC-16E C (Color Change) AATCC-61-2A C (Color Color fastness Change) AATCC Crocking Dry Rub AATCC-8 4 Crocking Wet Rub AATCC-8 3 Heat press AATCC Perspiration AATCC-15 4 DP Rating AATCC 124 +/- 1% Bow ASTM D % Skew (after 3 wash) AATCC % Absorbency Drop test <10 Sec Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever Page 5.3 of 3 8

10 Fabric pack: 6 Garment type: Dupatta Style Screen Printed Category of staff : Length of fabric : Trim/ accessory: Sketch of Design Female 2.50 mts per Pack no No S. No. Name of company Color code 1 GETCO As per Sample Page 6.1 of 3 9

11 Fabric pack: 6 Fabric specification Standard No. Tolerance Type Chiffon (Dupatta) Content/ composition 100 % polyester AATCC-20/20A 0 % Weave Plain EPI (Finished) 80 +/- 5% ASTM-D-3775 PPI (Finished) 70 +/- 5% Filament polyester yarn Warp 100/36 denier /twist 1800/S ASTM-D % 100/36 denier /twist 1800/Z Yarn count & type (Body) Weft Filament polyester yarn 100/36 denier /twist 1800/S 100/36 denier /twist 1800/Z AATCC-20/20A 0% Width 115 cm +/- 1 c.m. Weight in GSM 70 to 75 ASTM D /- 5% Breaking Strength on 20cmx5 cm strip, Kgf Warp 19.6 kg Weft 13.2 kg ISO /- 5% Tear strength Warp 3520 grms Pendulum test +/- 2% ( KMI tear method tester Weft 3392 grms +/- 2% Length 2.50 mts. +/-2 cm Print (3 color) As per design 0% Border Dyed to matching with print Page 6.2 of 3 10

12 Fabric pack: 6 Fabric should confirm following quality standards: Tests Test Method Acceptable standard Fastness to sun light AATCC-16 5 Washing AATCC Colour fastness Crocking AATCC-8 5 Heat press AATCC Perspiration AATCC Dimensional stability (After 3 cycles) AATCC % Bow/ skew ASTM D % Shade Abrasion, cycles ASTM D 4966 change 5 Pilling 5 Washing shrinkage % Length 2% (Max) IS 63301A Width 1% *Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever Page 6.3 of 3 11

13 Fabric pack: 7 Garment type : Sari Style Printed sari Category of staff : Length of fabric : Trim/ accessory: Sketch of Design Female 5.50 mts per sari Matching Blouse pc. As per Pack- 8 no S. No. Name of company Color code 1 GETCO As per Sample Page 7.1of 3 12

14 Fabric pack: 7 Fabric specification Standard No. Tolerance Type Orient georgette polyester Content/ composition 100 %polyester with viscose border AATCC-20/20A 0 % Weave Plain + jacquard EPI (Finished) 105 +/- 5% ASTM-D-3775 PPI (Finished) 80 +/- 5% Semi-dull Filament Warp polyester yarn ( Finished) 80/36/ /S 0% 80/36/ /Z Yarn count & type (Body) Yarn count & type (Border) Semi-dull Filament Weft polyester yarn ( Finished) 80/36/ /S Warp 80/36/ /Z Semi-dull Filament polyester yarn 80/36/ /S 80/36/ /Z IS % AATCC-20/20A 0% Width 113cm +/- 1 c.m. Weight in GSM ( Finished) 88 to 90 ASTM D /- 2% Breaking Warp 36 kg Strength on 20cmx5 cm strip Weft 26 kg, Kgf IS /- 5% Tear strength Warp 3136gms +/- 2% Pendulum test ( KMI tear Weft 2624gms method +/- 2% tester Width of ready 7 cm Viscose Jacquard boarder 120/44Bright Viscose +/-2 mm Length 5.50 mtrs. +/-2 cm Print As per design 0% Page 7.2 of 3 13

15 Fabric pack: 7 Fabric should confirm following quality standards: Tests Colour fastness Acceptable Test Method standard Fastness to sun light AATCC C (Color Change) AATCC Crocking AATCC-8 5 Heat press AATCC Perspiration AATCC Dimensional stability (After 3 cycles) AATCC % Bow/ skew ASTM D % Shade Abrasion, cycles ASTM D 4966 change 5 Pilling 5 Washing shrinkage % Length 2% (Max) IS 6330:1A Width 1% Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever Page 7.3 of 3 14

16 Fabric pack: 8 Garment type: Blouse Category of staff : Length of fabric : Trim/ accessory: Sketch of Design Female 1.00 mtr per pack Nil No S. No. Name of company Color code (Matching to sari) 1 GETCO As per Sample Page 8.1 of 3 15

17 Fabric pack: 8 Fabric specification Standard No. Tolerance Type PC Rubia Content/ composition 70% polyester, 30%Cotton AATCC-20/20A +/- 2% Weave Plain EPI (Finished) 100 +/- 5% ASTM-D-3775 PPI (Finished) 80 +/- 5% Yarn count Warp 62s PC - hi twist +/- 2% IS 3442 Weft 62s PC - hi twist +/- 2% Yarn Type Warp Weft AATCC-20/20A Width 35 +/- 1 c.m. Weight in gms per sqm 55 to 60 ASTM D Breaking Strength on Warp kgf 20cmx5 cm strip, Kgf Weft kgf ISO /- 5% Tear strength Warp 928 gms +/- 2% ( KMI tear ASTM D 1424 Weft 800 gms tester +/- 2% Page 8.2 of 3 16

18 Fabric pack: 8 Fabric should confirm following quality standards: Tests Test Method Acceptable standard Fastness to sun light AATCC Washing AATCC Colour fastness Crocking AATCC Heat press AATCC Perspiration AATCC Dimensional stability (After 3 cycles) AATCC % Bow/ skew ASTM D % Shade Abrasion, cycles ASTM D 4966 change 4 Pilling 4 Washing shrinkage % Length 2% (Max) ISO 63301A Width 1% Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever Page 8.3 of 3 17

19 ANNEXURE 1 List of Fabric Defects Nature Yarn Defects Weaving Defects Defects Broken Filaments, Color flecks, Slubs, Knots Broken Ends, Broken Ends Woven in a Bunch, Broken Pattern, Double End, Float, Gout, Hole-Cut or Tear, Lashing-in, Local Distortion, Missing Ends, Oil or other Stain, Oily or Soiled Ends, Oily Weft, Reed Marks, Selvedge Defect, Slough Off, Smash, Snarls, Stitches, Untrimmed Loose threads, Weft Bar, Weft Crack. Processing Defects Bleaching spot, Blurred or Dark Patch, Defects caused by Hanging Thread, Dye Bar, Dyestuff Stain Misprint/Absence of Print, Patchy or Streaky or Uneven Dyeing, Pilling, Shading or Listing, Uneven Printing or Tinting, Water Mark, White Spot. Embroidery Defects Wrong Placement, Tilting of Embroidery, Broken threads, Incomplete embroidery, Shade Variation. Visual Defect Any visual defect that may affect, salability, serviceability, appearance of the fabric in a way that is significantly unacceptable for sale. 18

20 Specifications for packing: ANNEXURE 2 1. Pack should contain one pc. Of fabric length, sketch of design, trim etc. as mentioned in fabric Pack No.: 1 to 8 2. Ready Pack size 12 x10 ( +/- ½ ) 3. Material: Self adhesive poly bag, gauge: Necessary warning should be printed in front side of bag to keep it away from the reach of children. 12 Warning This bag is not a toy. Keep it away from the reach of children This side up Sticker Hole Pack No: 16 font Fabric code: 14 font Colour code: 14 font Lot no: 12 font Sort No.: 12 font 10 19

21 Design sketch of Fabric Packs 20

22 SALWAR KURTA DUPATTA SAREE - BLOUSE 21