Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Weber & Leucht GmbH Am Röhlingsberg 20, Fulda Tests in the fields: Tests for colour fastness, selected mechanical tests, determination of usage properties, mechnical and physico-chemical analysis of fabrics, textiles and textile products; determination of usage properties of cleaning agents Abbreviations used: see last page The laboratory is permitted within the specified testing fields, without being required to inform and obtain prior approval from DAkkS, 1) the free choice of standard or equivalent testing methods. 2) the modification, development and refinement of testing methods. The listed testing methods are exemplary. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. Tests for colour fastness 3) DIN EN ISO 105-A DIN EN ISO 105-A DIN EN ISO 105-A Textiles - Tests for colour fastness - Part A01: General principles of testing Textiles - Tests for colour fastness - Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/10

2 DIN EN ISO 105-A DIN EN ISO 105-C DIN EN ISO 105-C DIN EN ISO 105-C DIN EN ISO 105-C DIN EN ISO 105-C DIN EN ISO 105-D DIN EN ISO 105-D DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-E Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents Textiles - Tests for colour fastness - Part E01: Colour fastness to water Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali Period of validity: to Translation - 2/10

3 DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-E DIN EN ISO 105-J DIN EN ISO 105-J DIN EN ISO 105-J DIN EN N DIN EN ISO 105-P DIN EN ISO 105-X DIN EN ISO 105-X DIN EN ISO 105-X DIN EN ISO 105-B DIN EN ISO 105-B DIN EN ISO 105-B Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling Textiles - Tests for colour fastness - Part E13: Colour fastness to acid-felting: Severe Textiles - Tests for colour fastness - Part E14: Colour fastness to acid-felting: Mild Textiles - Tests of colour fastness - Part J02: Instrumental assessment of relative whiteness Textiles - Tests for colour fastness - Part J03: Calculation of colour differences Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat (excluding pressing) Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test Textiles - Tests for colour fastness - Part B05: Detection and assessment of photochromism Period of validity: to Translation - 3/10

4 DIN EN ISO 105-B DIN EN ISO 105-B Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration Mechanical test 1) (until test load up to 5000 N and an elongation of 3 m, accuracy of measurement according to DIN EN : Klasse 1 bis 4 N, Klasse 0,5 ab 4 N) DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN DIN EN Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction Textiles - test method for nonwovens - part 3: determination of tensile strength and elongation Period of validity: to Translation - 4/10

5 DIN EN ISO DIN ISO DIN DIN EN ISO DIN EN ISO DIN DIN EN ISO Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods Testing of organic materials - Separation test on fabric plies bonded together Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method Dimensional determination 1) (without restriction to dimension and method of analysis) DIN EN ISO DIN EN DIN EN DIN EN ISO Textiles - Determination of dimensional change in washing and drying Textiles - woven fabrics - construction - methods of analysis - part 2: determination of number of threads per unit length Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change Period of validity: to Translation - 5/10

6 Determination of abrasion resistance 1) (Determination of abrasion resistance of fabrics by the Martindale method and examination of of these surfaces) DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN ISO DIN EN SP_ SP_ SP_ Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling Assessment of the cleaning performance and surface protection properties of cleaning agents (Nordic Ecolabelling Test Version 2.0, R35 and R37) Assessment of the cleaning performance of all-purpose cleaners following the IKW method "Recommendation for the Quality Assessment of the Product Performance of All-Purpose Cleaners Period of validity: to Translation - 6/10

7 Pre-treatment of textiles 1) (washing/laundering and Xenon exposure) DIN EN ISO DIN EN ISO SP DIN EN ISO DIN EN ISO Textiles - Domestic washing and drying procedures for textile testing Textiles - Industrial washing and finishing procedures for testing of workwear Chemothermal laundry disinfection Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps Technological tests 3) DIN EN DIN DIN EN ISO AATCC DIN EN ISO DIN DIN DIN EN ISO Textiles - Fabrics - Determination of mass per unit area using small samples Testing of textiles - determination of water absorption of textile fabrics Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying Textiles - Oil-Repellency: Hydrocarbon Resistance Test Textile fabrics - Determination of resistance to surface wetting (spray test) Testing of textiles - Velocity of soaking water of textile fabrics (method by determining the rising height) Testing of textiles - Determination of the mass portion of warp and weft Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) Period of validity: to Translation - 7/10

8 DIN DIN EN DIN EN ISO DIN ISO DIN EN ISO Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle Determination of resistance of textile fabrics to water penetration - hydrostatic pressure test Paints and varnishes - Determination of gloss reading at 20, 60 and 85 (withdrawn standard) Textiles - weaves, coding system and examples Woven fabrics - Distortion - Determination of skew and bow Thermoanalytics 3) DIN EN ISO DIN EN ISO DIN EN ISO Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height Analysis of fibres 3) SP_ DIN EN ISO DIN EN ISO Qualitative and semi-quantitative infrared spectroscopy of fabrics and surfaces - FTIR-ATR-method Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method Period of validity: to Translation - 8/10

9 SP Qualitative Fiber Analysis: Light and scanning electron microscopy Physiochemical analysis 3) DIN EN ISO SP DIN EN ISO 7888 SP_ Textiles - Determination of ph of aqueous extract Water quality - Determination of conductivity Water quality - determination of electrical conductivity Testing of colouring materials 1) (spectroscopic methods) DIN SP SP DIN ASTM E CIE Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics Color Measurement of high-visibility clothing - Color value and luminous factor in accordance to DIN EN ISO 20471:2013 Whiteness index measurement of textiles Colorimetry - Part 7: Measuring conditions for object colours Standard Practice for Obtaining Spectrometric Data for Object- Color Evaluation Colorimetry 3rd Edition Period of validity: to Translation - 9/10

10 Abbreviations used: AATCC ASTM CIE DIN EN ISO SP American Association of Textiles Chemists and Colorists American Standard Testing Method International Commission on Illumination DIN German Institute for Standardization European Standard International Organization for Standarization In house method of the Weber & Leucht GmbH Period of validity: to Translation - 10/10