Small Signal MOSFET 115 mamps, 60 Volts N Channel SOT 23

Transcription

1 Small Signal MOSFET 115 mamps, 60 Volts NChannel SOT2 Pb Free Package is Available. LESHAN RADIO COMPANY, LTD. 1 MAXIMUM RATINGS Rating Symbol Value Unit DrainSource Voltage V DSS 60 Vdc DrainGate Voltage (R GS = 1.0 MΩ) V DGR 60 Vdc Drain Current Continuous T C = 25 C (Note 1.) Continuous T C = 100 C (Note 1.) Pulsed (Note 2.) GateSource Voltage Continuous Nonrepetitive (tp 50 µs) THERMAL CHARACTERISTICS I D I D I DM V GS V GSM madc Vdc Vpk Characteristic Symbol Max Unit Total Device Dissipation FR5 Board (Note.) T A = 25 C Derate above 25 C P D mw mw/ C Thermal Resistance, Junction to Ambient R θja 556 C/W Total Device Dissipation Alumina Substrate,(Note 4.) TA = 25 C Derate above 25 C ±115 ±75 ±800 ±20 ±40 P D mw mw/ C Thermal Resistance, Junction to Ambient R θja 417 C/W Junction and Storage Temperature T J, T stg 55 to The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width 00 µs, Duty Cycle 2.0%.. FR5 = 1.0 x 0.75 x in. 4. Alumina = 0.4 x 0. x in 99.5% alumina. C 1 2 CASE 18, STYLE 21 SOT 2 (TO26AB) 115 mamps 60 VOLTS R DS(on) = 7.5 N - Channel MARKING DIAGRAM & PIN ASSIGNMENT W 702 = Device Code W = Work Week 2 2 ORDERING INFORMATION Device Marking Shipping Tape & Reel L2N7002LTG Tape & Reel 1/4

2 ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS DrainSource Breakdown Voltage (V GS = 0, I D = 10 µadc) V (BR)DSS 60 Vdc Zero Gate Voltage Drain Current T J = 25 C (V GS = 0, V DS = 60 Vdc) T J = 125 C I DSS µadc GateBody Leakage Current, Forward (V GS = 20 Vdc) GateBody Leakage Current, Reverse (V GS = 20 Vdc) ON CHARACTERISTICS (Note 2.) Gate Threshold Voltage (V DS = V GS,I D = 250 µadc) OnState Drain Current (V DS 2.0 V DS(on),V GS = 10 Vdc) Static DrainSource OnState Voltage (V GS = 10 Vdc, I D = 500 madc) (V GS = 5.0 Vdc, I D = 50 madc) Static DrainSource OnState Resistance (V GS = 10 V, I D = 500 madc) T C = 25 C T C = 125 C (V GS = 5.0 Vdc, I D = 50 madc) T C = 25 C T C = 125 C Forward Transconductance (V DS 2.0 V DS(on),I D = 200 madc) DYNAMIC CHARACTERISTICS Input Capacitance (V DS = 25 Vdc, V GS = 0, f = 1.0 MHz) Output Capacitance (V DS = 25 Vdc, V GS = 0, f = 1.0 MHz) Reverse Transfer Capacitance (V DS = 25 Vdc, V GS = 0, f = 1.0 MHz) I GSSF 100 nadc I GSSR 100 nadc V GS(th) Vdc I D(on) 500 ma V DS(on) r DS(on) Vdc Ohms g FS 80 mmhos C iss pf C oss pf C rss pf SWITCHING CHARACTERISTICS (Note 2.) TurnOn Delay Time (V DD = 25 Vdc, I D 500 madc, t d(on) 7 20 ns TurnOff Delay Time R G = 25 Ω, R L = 50 Ω, V gen = 10 V) t d(off) ns BODYDRAIN DIODE RATINGS Diode Forward OnVoltage (I S = 115 madc, V GS = 0 V) V SD 1.5 Vdc Source Current Continuous (Body Diode) I S 115 madc Source Current Pulsed I SM 800 madc 2. Pulse Test: Pulse Width 00 µs, Duty Cycle 2.0%. 2/4

3 TYPICAL ELECTRICAL CHARACTERISTICS Figure 1. Ohmic Region Figure 2. Transfer Characteristics Figure. Temperature versus Static DrainSource OnResistance Figure 4. Temperature versus Gate Threshold Voltage /4

4 SOT-2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI A L Y14.5M, CONTROLLING DIMENSION: INCH. V 1 2 G B S DIM INCHES MILLIMETERS MIN MAX MIN MAX A B C D G H D H C K J J K L S V inches mm 4/4

5 Tape & Reel and Packaging Specifications for Small-Signal Transistors, FETs and Diodes Embossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as the shipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a secure cavity for the product when sealed with the peelback cover tape. Two Reel Sizes Available (7"and 1",) SOT2, SC70/SOT2, Used for Automatic Pick and Place Feed Systems SC89, SC88/SOT6, SC88A/SOT5, Minimizes Product Handling SOD2, SOD-52 in Tape EIA 481, 1, 2 Use the standard device title and add the required suffix as listed in the option table below (Table 1). Note that the individual reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is one full reel for each line item, and orders are required to be in increments of the single reel quantity. SOD-2 SC-59, SC-70, SC-75,SOT-2 SC-88, SOT-6 T1 Orientation SC-88A, SOT-5 T1 Orientation Direction of Feed Typical Reel Orientations Table 1. EMBOSSED TAPE AND REEL ORDERING INFORMATION Package SOT2 SC70/SOT2 SC89 SC88/SOT-6 SC88A/SOT-5 SOD-2 Tape Width Pitch Reel Size Devices Per Reel Device (mm) mm mm(inch) and Minimum Suffix Order Quantity SOD-52

6 EMBOSSED TAPE AND REEL DATA FOR DISCRETES CARRIER TAPE SPECIFICATIONS K t D P 0 P 2 10 Pitches Cumulative Tolerance on Tape ± 0.2mm( ± ) Top Cover Tape A 0 E F W B 1 K 0 See Note 1 B 0 P Embossment Center Lines of Cavity D 1 For Components 2.0mm x 1.2mm and Larger For Machine Reference Only Including Draft and RADII Concentric Around B 0 User Direction of Feed 10 o R Min Bar Code Label Tape and Components Shall Pass Around Radius R Bending Radius Embossed Carrier Without Damage 100 mm Maximum Component Rotation (.97 ) 1 mm Max Typical Component Cavity Center Line Typical Component Center Line 1 mm(.09 ) Max 250 mm (9.84 ) *Top Cover Tape Thickness(t 1 ) 0.10mm (0.004 )Max. Tape Embossment Camber (Top View) Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm DIMENSIONS Tape Size B Max 1 D D 1 E F K P 0 P 2 RMin TMax WMax 8mm 12mm 16mm 24mm 4.55mm (.179 ) 8.2mm (.2 ) 12.1mm (.476 ) 20.1mm (.791 ) mm ( ) 1.0Min (.09 ) 1.5mm Min (.060 ) 1.75 ± 0.1mm (.069 ±.004).5 ± 0.05mm (.18±.002 ) 5.5 ± 0.05mm (.217 ±.002 ) 7.5 ± 0.10mm (.295 ±.004 ) 11.5 ± 0.1mm (.45 ±.004 ) 2.4mm Max (.094 ) 6.4mm Max (.252 ) 7.9mm Max (.11 ) 11.9mm Max (.468 ) 4.0 ± 0.1mm (.157 ±.004 ) 2.0 ± 0.1mm (.079 ±.002 ) 25mm (.98 ) 0mm (1.18 ) 0.6mm (.024 ) 8.mm (.27 ) 12 ±.0mm (.470 ±.012 ) 16.mm (.642 ) 24.mm (.957 ) Metric dimensions govern - English are in parentheses for reference only. NOTE 1: A 0, B 0, and K 0 are determined by component size. The clearance between the components and the cavity must be within.05 mm min. to.50 mm max., NOTE 2: the component cannot rotate more than 10 o within the determined cavity. NOTE : If B1 exceeds 4.2 mm (.165 ) for embossed tape, the tape may not feed through all tape feeders.

7 EMBOSSED TAPE AND REEL DATA FOR DISCRETES 1.5mm Min (.06 ) 1.0mm ± 0.5mm (.512 ±.002 ) T Max Outside Dimension Measured at Edge A 20.2mm Min (.795 ) 50mm Min (1.969 ) Full Radius G Inside Dimension Measured Near Hub Size A Max G T Max 0mm ( ) 8.4mm+1.5mm, -0.0 ( , -0.00) 14.4mm (.56 ) 12mm 0mm ( ) 12.4mm+2.0mm, -0.0 ( , -0.00) 18.4mm (.72 ) 16mm 60mm (14.17 ) 16.4mm+2.0mm, -0.0 ( , -0.00) 22.4mm (.882 ) 24 mm 60mm (14.17 ) 24.4mm+2.0mm, -0.0 ( , -0.00) 0.4mm (1.197 ) Reel Dimensions Metric Dimensions Govern English are in parentheses for reference only Storage Conditions Temperature: 5 to 40 Deg.C (20 to 0 Deg. C is preferred) Humidity: 0 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation)