Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions

Transcription

1 Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television Cellular Phones Digital Communication Equipment Various Electronics Equipments Circuit Where a Stable Ground is Unavailable Constructions Item Material Ferrite Substance (NiO-CuO-ZnO-Ferrite) Silver Electrode Electrode (Ag/Cu/Ni/Sn) TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 8

2 Dimensions Unit: mm Type Size Inch (mm) A B C D Weight (g) (1,000pcs) 0805(2012) 2.0± ± ± ~ Electrical Specifications Type: Impedance (Ω) Tolerance Test Freq. (MHz) DCR (Ω) max. Rated Current (ma) max. 5 ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% Page 2 of 8

3 Impedance (Ω) Tolerance Test Freq. (MHz) DCR (Ω) max. Rated Current (ma) max. 47 ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% ±25% Page 3 of 8

4 Environment Characteristics Electrical Characteristic Test Test Item Test Condition Requirement Impedance DCR HP4291B Agilent 34401A Refer to standard electrical spec. Mechanical Characteristic Test Test Item Test Condition Requirement Test device shall be soldered on the substrate Substrate Dimension:100x40x1.6mm Deflection: 2.0mm Keeping Time: 30sec Flexure Strength The forces applied on the right conditions must not damage the terminal electrode and the ferrite Vibration Resistance to Soldering Heat Solderability Test device shall be soldered on the substrate Oscillation Frequency : 10 to 55 to 10Hz for 1min Amplitude : 1.5mm Time : 2hrs for each axis (X,Y&Z), total 6hrs Pre-heating: 150 C, 1min Solder Temperature: 260±5 C Immersion Time: 10±1sec Pre-heating: 150 C, 1min Solder Temperature: 245±5 C Immersion Time: 4±1sec Test device shall be soldered on the substrate Appearance: No damage More than 75% of the terminal electrode should be covered with solder Impedance: within ±30% of initial value The electrodes shall be at least 90% covered with new solder coating Terminal Strength Test 1.0kg Temperature Cycle One cycle: One cycle/step1: -55±3 C for 30min step2: 25±2 C for 3.0min step3:125±3 C for 30min step4:25±2 C for 3.0min Total: 100cycles Measured after exposure in the room condition for 24hrs Appearance: No damage Impedance: within±30% of initial value Page 4 of 8

5 Test Item Test Condition Requirement Humidity Resistance High Temperature Resistance Low Temperature Resistance Temperature: 40±2 C Relative Humidity: 90 ~ 95% time: 1000hrs Measured after exposure in the room condition for 24hrs Temperature: 125±3 C Relative Humidity : 0% Applied Current: Rated Current time: 1000hrs Measured after exposure in the room condition for 24hrs Temperature: -55±3 C TR elative Humidity : 0% time: 1000hrs Measured after exposure in the room condition for 24hrs Operating Temperature: -55 C ~ 125 C Storage Temperature: 25±3 C; Humidity < 80%RH Appearance: No damage Impedance: within±30% of initial value Packing Information: Carrier Tape Dimensions Unit: mm Type A B T W P F K Page 5 of 8

6 Reel Dimensions Type A B C D Unit: mm Quantity (EA) ,000 Recommended Pattern Type A B C Unit: mm ~ Page 6 of 8

7 How to Order CBM 0805 J xx -TR70 Packing Code TR70:7 Reel, RoHS Factory Location Code Impedance Code: 150: 15Ω; J: Material Code Size Code in inch(mm) 0805(2012) Taitron Multilayer Chip Bead Page 7 of 8

8 How to contact us US HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONENTS INCORPORATED TAIWAN, TAIPEI 6F., No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 23146, Taiwan R.O.C. Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA,1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI,200052, CHINA Tel: Fax: CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, , CHINA Page 8 of 8