Low Power Low Offset Voltage Dual Comparator. LM393A/B Series. General Description. Features. Applications

Size: px

Start display at page:

Download "Low Power Low Offset Voltage Dual Comparator. LM393A/B Series. General Description. Features. Applications"

Archibald Stone
5 years ago
Views:

Low Power Low Offset Voltage Dual Comparator Low Power Low Offset Voltage Dual Comparator General Description The LM393A/B series consist of two independent precision voltage comparators with a

1 Low Power Low Offset Voltage Dual Comparator Low Power Low Offset Voltage Dual Comparator General Description The LM393A/B series consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. The LM393A/B series are specifically designed to operate from a single power supply over wide range of voltages. Operation from split power supply is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. The LM393A/B series are compatible with industry standard 393. The LM393A series is available in standard packages of SOP-8 and TSSOP-8. The LM393B series is available in standard packages of SOP-8. SOP-8 TSSOP-8 Features Wide supply voltage range -Single supply: 2.0V to 36V -Dual supplies: ±1.0V to ±18V Low supply current drain: 0.6mA Low input bias current: 25nA (typical) Low input offset current: ±5.0nA (typical) Low input offset voltage: 1.0mV (typical) Input common mode voltage range includes ground Differential input voltage equals to the power supply voltage Low output saturation voltage: 200mV at 4mA Open collector output RoHS compliant and halogen free Applications Battery Charger Cordless Telephone Switching Power Supply DC-DC Module PC Motherboard Communication Equipment TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 11

2 Ordering Information LM Circuit Type Packing Code TU: Tube, RoHS Input Offset Value UG: Tube, Halogen Free A: 5mV max. TR30: 13 Reel, RoHS B: 3mV max. RG30: 13 Reel, Halogen Free Outline S8: SOP-8 TS8: TSSOP-8 Factory Location Code Pin Configuration SOP-8 & TSSOP-8 Block Diagram (Each Comparator) Page 2 of 11

3 Absolute Maximum Ratings (Note 1) Low Power Low Offset Voltage Dual Comparator Symbol Description Ratings Unit VCC Supply Voltage 40 V VID Differential Input Voltage 40 V VIN Input Voltage -0.3 to 40 V IIN Input Current (VIN<-0.3V) (Note 2) 50 ma PD ESD Output Short-Circuit to Ground Power Dissipation (TA=25 C) Continuous SOP TSSOP ESD (Human Body Model) (Note 3) 500 ESD (Machine Model) (Note 3) 150 TJ Operating Junction Temperature 150 C TSTG Storage Temperature Range -65 ~ +150 C TLEAD Lead Temperature (Soldering, 10 sec.) 260 C Note: 1. Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended period may affect device reliability. 2. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+ voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states will re-establish when the input voltage, which was negative, again returns to a value greater than -0.3 VDC (at 25 C). 3. ESD is tested according to MIL-STD-883D Method Class 1 for ESD-HBM and JEDEC EIA/JESD22-A115 Class A for ESD-MM. Recommended Operating Conditions Symbol Description Min. Max. Unit VCC Supply Voltage 2 36 V TA Operating Temperature Range C mw V Page 3 of 11

4 Electrical Characteristics Low Power Low Offset Voltage Dual Comparator TA=25 C, VCC=5V, GND=0V, Unless otherwise specified -40 C TA 105 C(Note 4) Input Offset Voltage Description Min. Typ. Max. Unit Conditions Input Bias Current Input Offset Current LM393A LM393B Input Common Mode Voltage Range (Note 5) Supply Current C TA 105 C mv C TA 105 C na C TA 105 C na C TA 105 C 0 - VCC-1.5 V VCC=30V VO=1.4V, RS=0Ω, VCC=5V to 30V IIN+ or IIN- with output in linear range, VCM=0V VCM=0V VCC=5V, C TA 105 C RL= ma VCC=30V C TA 105 C RL= Voltage Gain V/mV Large Signal Response Time ns VCC=15V, RL 15KΩ, VO=1V to 11V VIN=TTL, Logic Swing, VREF=1.4V, VRL=5V, RL=5.1K Response Time µs VRL=5V, RL=5.1K Output Sink Current 6 16 ma Output Leakage Current Saturation Voltage VIN+=0V, VIN-=1V, VO=1.5V na VIN+=1V, VIN-=0V, VO=5V µa VIN+=1V, VIN-=0V, VO=30V, -40 C TA 105 C mv C TA 105 C Note: 4. Limits over the full temperature are guaranteed by design, but not tested in production. VIN+=0V,VIN=-1V, ISINK 4mA 5. The input common-mode voltage of either input signal voltage should not be allowed to go negatively by more than 0.3V (at 25 C). The upper end of the common-mode voltage range is VCC-1.5V (at 25 C), but either or both inputs can go to +36V without damages, independent of the magnitude of the VCC. Page 4 of 11

Typical Characteristics Curves Fig.1- Supply Voltage vs. Supply Current Fig.2- Supply Voltage vs. Input Bias Current Supply Voltage (V) Supply Voltage (V) Fig.3- Output Sink Current vs.

5 Typical Characteristics Curves Fig.1- Supply Voltage vs. Supply Current Fig.2- Supply Voltage vs. Input Bias Current Supply Voltage (V) Supply Voltage (V) Fig.3- Output Sink Current vs. Saturation Voltage Fig.4- Response Time for 5mV Input Overdrive - Negative Transition Saturation Voltage (V) Input Voltage (mv) Supply Current (ma) Output Voltage (V) Input Bias Current (na) Output Sink Current (ma) Time (us) Page 5 of 11

6 Fig.5- Response Time for 5mV Input Overdrive - Positive Transition Input Voltage (mv) Output Voltage (V) Time (us) Typical Applications Fig.6- Basic Comparator Fig.7- Driving CMOS Page 6 of 11

7 Fig.8- One Shot Multi-vibrator Fig.9- Square-wave Oscillator Page 7 of 11

8 Dimensions in mm(inch) SOP-8 Page 8 of 11

9 TSSOP-8 Page 9 of 11

10 Marking Information Low Power Low Offset Voltage Dual Comparator Outline SOP-8 TSSOP-8 Temperature Range -40 to 105 C PN Marking Code Packing Type LM393AS8-08-TU LM393AS8-08-UG LM393BS8-08-TU LM393BS8-08-UG LM393AS8-08-TR30 LM393AS8-08-RG30 LM393BS8-08-TR30 LM393BS8-08-RG30 LM393ATS8-08-TU LM393ATS8-08-UG LM393BTS8-08-TR30 LM393BTS8-08-RG30 LM393A TCI DC LM393B TCI DC LM393A TCI DC LM393B TCI DC 393A 393B Tube Tape & Reel Tube Tape & Reel Note: DC=Date Code=YM, Y=0=2010, Y=1=2011, M=1=Jan, M=A=Oct. Packing information Package Packing Type Min. Packing Inner Box Packing Carton Packing Qty. Dimensions(mm) Qty. Dimensions(mm) Qty. Dimensions(mm) SOP-8 TSSOP-8 Tube K 554x135x70 100K 572x386x305 T & R 4K 330x330x18 4K 358x340x50 32K 445x385x370 Tube K 554x135x K 572x386x165 T & R 3K 330x330x18 6K 358x340x50 48K 445x375x370 Page 10 of 11

11 How to contact us: US HEADQUARTERS WEST HARRISON PARKAWAY, VALENCIA, CA Tel: (800) TAITRON (800) (661) Fax: (800) TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP BRAZIL Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI, , CHINA Tel: Fax: Page 11 of 11

Low Power Low Offset Voltage Quad Comparator. LM339A/B Series. General Description. Features. Applications

Low Power Low Offset Voltage Quad Comparator Low Power Low Offset Voltage Quad Comparator General Description The LM339A/B series consist of four independent precision voltage comparators with a typical