1 W High Power LED TPLG-WR7171LS-H11-1H. 1 W High Power Cool White LED. Features. Applications. Device Selection Guide
|
|
|
- Blanche Marianna Baldwin
- 5 years ago
- Views:
Transcription
1 1 W High Power LED 1 W High Power Cool White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications Illumination LCD backlight Automotive application Flashlight Architectural lighting Medical application Indictor/ Decoration Device Selection Guide Part No. Material Chip Emitted Color Lens Color InGaN Cool White Water Clear TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 7
2 Absolute Maximum Ratings (Ta=25 C) Parameter Symbol Typ. Value Max. Unit Reverse Voltage VR >5 V Forward Current (1) IF ma Peak Pulsed Forward Current (2) IPF ma Power Dissipation Pd W Storage Temperature Tstg ~ +100 C LED Junction Temperature Tj C Notes: 1. The maximum forward current can be applied only at condition that the LED junction temperature is below the maximum. A proper heat sink is required to attach LED if the forward driving current is above 150mA. 2. Duty Ratio=1/10, Pulse Width = 10ms. Electro-Optical Characteristics (Ta=25 C) Parameter Symbol Min. Typ. Max. Unit Condition Total Flux (1) Φv Im Total Including Angle (4) θ0.9v deg Viewing Angle 2θ1/ deg Chromaticity Coordinates x y IF =350mA Spectra Half Width λ nm Forward Voltage (2) VF V Thermal Resistance (3) θjs C/W Reverse Current IR ua VR=5V Notes: 1. Luminous flux measurement tolerance: ±15% 2. Forward voltage measurement tolerance: ±0.05V 3. θjs means thermal resistance between LED junction to heat slug of LED. 4. Viewing angle 0.9V is the including angle at which 90% of total luminous flux is captured. Page 2 of 7
3 Typical Electro-Optical Characteristics Curves (Ta=25 C) Spectral Distribution Forward Voltage vs. Forward Current Forward Current (ma) Relative luminous intensity Relative luminous intensity Wavelength λp(nm) Relative Luminous Intensity vs. Ambient Temperature Ambient Temperature Ta ( C) Forward Current vs. Ambient Temperature Forward Voltage (V) Forward Current (ma) Relative Luminous Intensity vs. Forward Current Relative luminous intensity Forward Current (ma) Radiation Diagram Ambient Temperature Ta ( C) Page 3 of 7
4 Package Outline Dimensions (Unit=mm) Note: 1. The anode side of device is denoted by a hole in the lead frame. 2. The tolerances unless mentioned is ±0.2mm, Unit = mm Packing Quantity Specification Packing Type Tube Inner Box Carton Qty (pcs) 50 1,500 9,000 Box Size (mm) x90x70 425x200x245 Page 4 of 7
5 Ordering Information TP L G W R 7171 LS H 1 1 1H 88 TU Lead Free Plastic Tube Factory Location Code Rank Code Power Code Chip Count Code Heatsink Insulated Lambertain, degrees Size Code in mm Dome Top Cool White Color Gullwing Type Lead with Wing Taitron High Power LED Rank combination Total Luminous Flux Bin Rank Bin Code Min. Max. Condition 1H IF =350mA Note: Luminous flux measurement tolerance: ±15% Forward Voltage Bin Rank Bin Code Min. Max. Condition A B C IF =350mA D Note: Forward voltage measurement tolerance: ±0.05V Page 5 of 7
6 Cool white Chromaticity Coordinates Specifications for Bin Grading Note: The chromatic coordinates measurement tolerance: ± Page 6 of 7
7 How to contact us US HEADQUARTER WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800) TAITRON (800) (661) Fax: (800) TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP BRAZIL Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI , CHINA. Tel: Fax: Page 7 of 7
3mm Dome Power LED TLH-X1W3-ZTDG. 3mm Dome Power LED. Features. Applications. Device Selection Guide. High Luminance. Low profile
3mm Dome Power LED Features High Luminance Low profile Low thermal resistance Design for high current operation RoHS compliance Piranha Applications Automotive exterior lighting Electronic signs and signals
3mm Dome Power LED TLH-Q1W QS. 3mm Dome Power LED. Features. Descriptions. Applications. Device Selection Guide
3mm Dome Power LED Features High flux output Low profile Low thermal resistance Design for high current operation Packaged in Tubes for use with automatic insertion equipment Piranha Descriptions This
Top View with Cool White LED TSRJ-WT3227-V2W1
Features Fluorescence type High luminous intensity High Efficiency Emission color: x=0.29, y=0.30 ESD protection RoHS M3227 Descriptions This white LED which was fabricated using a blue LED and a phosphor,
0603 Package 0.8mm Height Flat Top White LED TSP1-WF1608H8-NPY. Features. Descriptions. Applications. Device Selection Guide
0603 Package 0.8mm Height Flat Top White LED 0603 Package 0.8mm Height Flat Top White LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
Top View with White LED TSRJ-WT3528B9
Features PLCC-2 package. White package Optical indicator and colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic
Top View with Super Blue LED TSRJ-BT3528B9
Features PLCC-2 package. White package Optical indicator and colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic
0805 Package 0.8mm Height True Green LED TSP1-TF2012H8-R1S2. Features. Descriptions. Applications. Device Selection Guide
0805 Package 0.8mm Height True Green LED 0805 Package 0.8mm Height True Green LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
Full Color Top View LED TFRJ-QTBHT5050CG-B2. Full Color Top View LED. Features. Descriptions. Applications. Device Selection Guide
Full Color Top View LED Features Super-luminosity chip LED. White SMT package. Built in red, green and blue chips Lead frame package with individual 6 pins. Wide viewing angle Soldering methods: IR reflow
0805 PACKAGE CHIP LED TSP2-XF2012A3
0805 Package Chip LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-color type RoHS compliance
Full Color Chip LED with Right Angle Lens TFPR-QTB1FA2714. Full Color Chip LED With Right Angle Lens. Features. Applications.
Full Color Chip LED with Right Angle Lens Full Color Chip LED With Right Angle Lens Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared
OPTO INTERRUPTER TQIL-BTS
OPTO INTERRUPTER Opto Interrupter Features Wide gap between light emitter and detector (3.8mm) High sensing accuracy PWB mounting type package Applications Copier Printer Facsimile Ticket vending machine
3mm Dome Power LED TLH-Q1W QS. Features. Descriptions. Applications. Device Selection Guide
3mm Dome Power LED Features High flux output Low profile Low thermal resistance Design for high current operation Packaged in Tubes for use with automatic insertion equipment RoHS Compliance Piranha Descriptions
1206 Reverse Package Super Blue LED TSP3-BF3216-N1P2. Features. Descriptions. Applications. Device Selection Guide
1206 Reverse Package Super Blue LED 1206 Reverse Package Super Blue LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor
1A Standard Negative Voltage Regulator LM79XX. General Description. Features. Applications
1A Standard Negative Voltage Regulator 1A Standard Negative Voltage Regulator General The series is three terminal standard negative voltage regulator designed for a wide range of applications that required
1206 Reverse Package Super Red LED TSP3-QF3216A3. Features. Descriptions. Applications. Device Selection Guide
1206 Reverse Package Super Red LED 1206 Reverse Package Super Red LED Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase
8mm Oval Lamp LED TLH-Q1E8-HKKK. 8mm Oval Super Red LED. Features. Applications. Device Selection Guide
8mm Oval Lamp LED 8mm Oval Super Red LED Features Oval shape package High brightness Wide viewing angle UV resistant epoxy RoHS compliance 8mm Applications Indoor/outdoor application Indicator application
THICK FILM CHIP RESISTOR GENERAL PURPOSE RC1210
THICK FILM CHIP RESISTOR GENERAL PURPOSE Features Small and light weight Excellent heat resistance and moisture resistance Suitable size and packaging for surface mount assembly RoHS Compliant Applications
1.5A Adjustable Positive Voltage Regulator TL A Adustable Positive Voltage Regulator. General Description. Features. Ordering Information
1.5A Adjustable Positive Voltage Regulator 1.5A Adustable Positive Voltage Regulator General Description The is adjustable 3-terminal positive voltage regulator capable of supplying in excess of 1.5A over
TVT05LCW TVT12LCW TVT15LCW TVT24LCW
Features Low Capacitance Unidirectional TVS This Transient Voltage Suppressor is intended to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events as well to offer a Minimum
For televisions, audio recorders, notebook computers, battery chargers, desktop computers and telecommunication equipment. MAX Overload Voltage
Thick Film Chip Resistor Low Ohmic Features Low Inductance Battery Charge Current Sensing Highly Reliable Multilayer Electrode Construction Higher Component and Equipment Reliability Excellent Performance
N-Channel Enhancement Mode Field Effect Transistor 2N7000A. Features. Mechanical Data. Maximum Ratings (T Ambient =25ºC unless noted otherwise)
Features N-Channel Enhancement Mode Field Effect Transistor High density cell design for low RDS(ON) Voltage controlled small signal switch Rugged and reliable High saturation current capability RoHS compliance
Low Power Quad Operational Amplifier. LM324A/B Series. Low Power Qaud Operational Amplifier. General Description. Features.
Low Power Quad Operational Amplifier Low Power Qaud Operational Amplifier General Description The LM324A/B series consist of four independent, high gain and internally frequency compensated operational
Enhancement Mode MOSFET (N-Channel) 2N7002E. Features. Mechanical Data. Maximum TA=25 C unless noted otherwise SOT-23
Enhancement Mode MOSFET (N-Channel) Enhancement Mode MOSFET (N-Channel) Features High density cell design for low RDS(ON). Voltage controlled small signal switch Rugged and reliable High saturation current
N-Channel Enhancement Mode Field Effect Transistor 2N7000. Features. Mechanical Data. Maximum Ratings (T Ambient =25ºC unless noted otherwise) TO-92
Features N-Channel Enhancement Mode Field Effect Transistor High density cell design for low RDS(ON) Voltage controlled small signal switch Rugged and reliable High saturation current capability RoHS compliance
20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
Low Power Low Offset Voltage Quad Comparator. LM339A/B Series. General Description. Features. Applications
Low Power Low Offset Voltage Quad Comparator Low Power Low Offset Voltage Quad Comparator General Description The LM339A/B series consist of four independent precision voltage comparators with a typical
THICK FILM CHIP RESISTOR Anti-Sulfurated RCA0402~RCA2512
THICK FILM CHIP RESISTOR Anti-Sulfurated RCA0402~RCA2512 Thick Film Chip Resistor Anti-Sulfurated Features High performance to prevent Sulfuration in a Sulfur containing environment Small Size and light
Low Power Low Offset Voltage Dual Comparator. LM393A/B Series. General Description. Features. Applications
Low Power Low Offset Voltage Dual Comparator Low Power Low Offset Voltage Dual Comparator General Description The LM393A/B series consist of two independent precision voltage comparators with a typical
1A Low Dropout Positive Voltage Regulator. LM2940 Series. General Description. Features. Ordering Information
1A Low Dropout Positive Voltage Regulator 1A Low Dropout Positive Voltage Regulator General Description The LM2940 is a low dropout regulator designed to provide output current up to 1A with a typically
The LM78xxA series is available in 7 fixed output voltage:5v,6v,8v,9v,12v,15v and 18V.
1A Standard Positive Voltage Regulator 1A Standard Positive Voltage Regulator General Description The series is three terminal standard positive voltage regulator designed for a wide range of applications
800V/4A N-Channel MOSFET MSK4N80T/F 800V/4A. N-Channel MOSFET. General Description. Features. Pin Configuration TO-220 TO-220F
800V/4A N-Channel MOSFET 800V/4A N-Channel MOSFET General Description Fast switching time Low on resistance, low gate charge Excellent avalanche characteristics Suitable for active power factor correction
THICK FILM CHIP RESISTOR GENERAL PURPOSE RC0201J/F~RC2512J/F
THICK FILM CHIP RESISTOR GENERAL PURPOSE RC0201J/F~RC2512J/F Thick Film Chip Resistor General Purpose Features Small Size and light weight Excellent heat resistance and moisture resistance Highly reliable
Adjustable Precision Shunt Voltage Regulator LA431A LA431B. Adjustable Precision Shunt Regulator. General Description.
Adjustable Precision Shunt Voltage Regulator Adjustable Precision Shunt Regulator General Description LA431A and LA431B are three terminal Adjustable PrecisionShunt Regulators, With guaranteed thermal
Symbol Description Value Unit Conditions. Minimum 600
600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:
150mA Ultra Low Dropout Voltage Regulator. LM2204 Series. General Description. Features. Applications
150mA Ultra Low Dropout Voltage Regulator 150mA Ultra Low Dropout Voltage Regulator General Description The LM2204 series is a positive voltage regulator IC fabricated by high voltage EPNP process. The
TSCDB52 TSCDB54 TSCDB56 TSCDB510
5A Low Profile Chip Schottky Rectifier 5A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low power loss, High efficiency High current capability, Low voltage drop Plastic
MOC3041. Zero-Cross Optoisolators Triac. Zero-Cross Optoisolators Triac. Features. Applications. Compact dual-in-line package.
Zero-Cross Optoisolators Triac Features Compact dual-in-line package. 400V peak blocking voltage. Isolation voltage between input and output (Viso: 5000Vrms). Applications DIP-6 Solenoid/Valve Controls.
1 A Low Dropout Positive Voltage Regulator LD1117A12/ADJ-LD1117A50/ADJ. 1A Low Dropout Positive Voltage Regulator. General Description.
1 A Low Dropout Positive Voltage Regulator LD1117A12/ADJLD1117A50/ADJ 1A Low Dropout Positive Voltage Regulator General Description LD1117A is a three terminal low dropout positive voltage regulator. It
400V/18A POWER MOSFET (N-Channel) MSU18N40T. 400V/18A Power MOSFET (N-Channel) General Description. Features. Pin Configuration and Symbol TO-220
400V/18A POWER MOSFET (N-Channel) 400V/18A Power MOSFET (N-Channel) General Description is a N-Channel enhancement mode power MOSFET with advanced technology. It is designed to have Better characteristics,
Enhancement Mode MOSFET (N-Channel) 2N7002K. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) SOT-23
Enhancement Mode MOSFET (N-Channel) Enhancement Mode MOSFET (N-Channel) Features ESD Protected 2000V High density cell design for low R DS(ON) Voltage controlled small signal switch Rugged and reliable
2.0A Low Profile Chip Schottky Rectifier TSCDA24LH. Features. Application. Mechanical Data
2.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Lead-free solder joint, no wire bond & lead frame Low power loss, High efficiency High current capability, Low voltage
5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
500mA Ultra Low Dropout Positive Voltage Regulator LD2213. General Description. Features. Applications
500mA Ultra Low Dropout Positive Voltage Regulator 500mA Ultra Low Dropout Positive Voltage Regulator General Description is an ultra low dropout positive voltage regulator with a dropout of 350 (typical)
Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions
Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television
Enhancement Mode MOSFET (Double N-Channel) 2N7002KDWS. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) SOT-363
Enhancement Mode MOSFET (Double N-Channel) Enhancement Mode MOSFET (Double N-Channel) Features Advanced Trench Process Technology High density cell design for low R DS(ON) Very low leakage current in off
Small Signal General Purpose Transistors (PNP) BC556/BC557/BC558. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Small Signal General Purpose Transistors (PNP) Small Signal General Purpose Transistors (PNP) Features PNP Silicon Epitaxial Planar Transistor for Switching and Amplifier Applications RoHS compliance Mechanical
1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) TCDU1WW. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) 1A Sintered Glass Passivated Ultra Fast Rectifier (SGP ) Features Sintered glass passivated (SGP ) rectifier chip Low Profile with Chip Package
50V/5.3A P-Channel Power MOSFET MSS5P05D / MSS5P05U. General Description. Features. Pin Configuration DPAK (TO-252) IPAK (TO-251) MSS5P05U MSS5P05D
50V/5.3A P-Channel Power MOSFET 50V/5.3A P-Channel Power MOSFET General Description Low on resistance Improved inductive ruggedness Fast switching time Rugged polysilicon gate cell structure Lower input
150mA Ultra Low Dropout Positive Voltage Regulator LD2202. General Description. Features. Applications
150mA Ultra Low Dropout Positive Voltage Regulator 150mA Ultra Low Dropout Positive Voltage Regulator General Description is an ultra low dropout positive voltage regulator with a dropout of 165 (typical)
mm Silicon PIN Photodiode PD638B
Features Fast response times High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Description is a high speed
4.8mm Semi-Lens Silicon PIN Photodiode PD438C/S46
Features Fast response times High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Description is a high speed
4.8mm Semi-Lens Silicon PIN Photodiode PD438B
Features Fast response times High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Description is a high speed
Terminals: Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026 TCDU 1JW TCDU 1KW. 1.0 A See Fig A. 50 µa TA=125 C.
1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) 1DW 1MW 1.0A Sintered Glass Passivated Ultra Fast Low Profile Rectifier (SGP ) Features Qualified to AEC-Q101 standards for high reliability
High Power 6W LED. Package Dimensions: Features: Applications: Absolute Maximum Ratings at Ta=25 C.
Package Dimensions: Features: Excellent transiting heat from LED chip operating under 350mA High luminous output No UV Applications: Reading lights Portable flashlight Uplighters & downlighters Garden
Round Through-Hole LED Lamp (3 mm)
Round Through-Hole LED Lamp (3 mm) OLBx4C7 Series High brightness with well-defined spatial radiation patterns U-resistant epoxy lens Choice of blue, green, red or yellow No stand-offs Each OLBx4C7 series
Standard 12A Silicon Controlled Rectifier TCR12FWMT. Features. Mechanical Data. Maximum Ratings
Standard 12A Silicon Controlled Rectifier Standard 12A Silicon Controlled Rectifier Features Sensitive gate triggering with low gate current drive Glass Passivated die junctions High surge current capability
HP70MWJ 8mm,3W White LED 3W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications:
Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 27K, 3K, 35K, 4K, 5K, 57K, 65K and 1K The product itself will remain
PD438B/S46 Features Descriptions Applications Device Selection Guide Chip LED Part No. Lens Color Material
Features Fast response times High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Descriptions is a high speed
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet (Preliminary) Luminosity Full Color LED Features Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide
High Power 6W LED. Package Dimensions: Features: Applications: Absolute Maximum Ratings at Ta=25 C.
Package Dimensions: Features: Excellent transiting heat from LED chip operating under 350mA High luminous output No UV Applications: Reading lights Portable flashlight Uplighters & downlighters Garden
Technical Data Sheet 3mm POWER LED
Features. High Flux Output.. Designed for High Current Operation.. Low Thermal Resistance.. Low Profile.. Packaged in Tubes for Use with Automatic Insertion Equipment.. The product itself will remain within
4.8mm Semi-Lens Silicon PIN Photodiode EAPDLP04SCAA1
4.8mm Semi-Lens Silicon PIN Photodiode Features Fast response times High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version.. Description
Technical Data Sheet 5mm POWER LED
Features. High Flux Output.. Designed for High Current Operation.. Low Thermal Resistance.. Low Profile.. Packaged in Tubes for Use with Automatic Insertion Equipment.. The product itself will remain within
1-Watt SMD 6x6mm With Dome Lens
1-Watt SMD 6x6mm With Dome Lens Robust energy-efficient design with long operating life Low thermal resistance Medium beam angle High luminous intensity Applications Automotive interior lighting Architectural
SMD Mini Top LEDs Y2SC-A0R1S2B7E-2T8-AM
Features P-LCC-2 package. Colorless clear resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 112 to 280 mcd at 20mA. Qualification according to AEC-Q101 rev C. Precondition:
Description. Applications
1.0x0.5mm SMD CHIP LED LAMP PRELIMINARY SPEC Features 1.0mmx0.5mm SMT LED, 0.7mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Moisture sensitivity level : level
L Epoxy Lens Type Infrared Illuminator
L1050-66-60 Epoxy Lens Type Infrared Illuminator L1050-66-60 is a wide viewing and extremely high output power illuminator assembled with a total of 60 high efficiency lngaas diode chips, mounted on a
Description. Applications
3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA3020ARWC/A WHITE Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES 3.0mm x 2.0mm, 1.4mm high,
1.6mm Side Looking Infrared Emitting Diode IR968-8C
Features Low forward voltage Peak wavelength λp=940nm High reliability This product itself will remain within RoHS compliant version. Description The is a GaAlAs infrared emitting diode. The miniature
Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color)
Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and
power light source TM Technical Data DS34
power light source TM Luxeon V Emitter Technical Data DS34 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
EAPL2214GA0-AM. SMD Mini Top View LEDs PRELIMINARY. Features. Applications.
PRELIMINARY Features P-LCC-2 package. Colorless clear resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 710 to 1400mcd at 20mA Precondition: Bases on JEDEC J-STD 020D Level
HP60MW6G 8mm,1W Warm White LED 1W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications:
Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 27K, 3K, 35K, 4K, 5K, 57K, 65K and 1K The product itself will remain
HP60MWG 8mm,1W Cool White LED 1W Power LED Light Source. Technical Data Sheet. Features: Descriptions: Applications:
Features: long operating life Small footprint and low profile Energy efficient High current operation Silicone encapsulation Available in 2700K, 3000K, 3500K, 4000K, 5000K, 5700K, 6500K and 10000K The
XZNWHA102W PRELIMINARY SPEC PATENT PENDING. Outline Drawings. Features. Description APOLLO. Part Number: XZNWHA102W
PRELIMINARY SPEC PATENT PENDING ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features PLCC-4 PACKAGE. SINGLE COLOR. HIGH LUMINANCE. HIGH POWER,OPERATING CURRENT
Technical Data Sheet 0603 Package Chip LED (0.4mm Height)
Technical Data Sheet 0603 Package Chip LED (0.4mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Description. Applications
1.6x0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHK1608RWC/Z WHITE Features 1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR.
Round Through-Hole LED Lamp (3 mm)
Round Through-Hole LED Lamp (3 mm) High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Lead-frame material is iron alloy with tin plated leads No stand-offs Each OVLBx4C7
Technical Data Sheet 1206 Package Chip LED
Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Chip LED package. Colorless clear resin Wide viewing angle 130 o. Brightness: 71 to180 mcd at 20 ma. Qualification according to AEC-Q101.
White Surface Mount LED Lamp
Side-view white LED Surface mount lead frame package with two pins Wide viewing angles Product Photo Here The is ideal for backlighting LCD screens and for coupling with light guides. This design combines
Technical Data Sheet 5mm Infrared LED, T-1 3/4
Technical Data Sheet 5mm Infrared LED, T-1 3/4 Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain
Bulk and 52mm tape and reel standard; ammo pack, cut and formed, and radial Panasert/Avisert available upon request. Outline Type L ΦD H Φd
Metal Glazed Film Resistor High Voltage & High Ohmic Type Metal Glazed Film Resistor High Voltage & High Ohmic Type Features Low cost High resistance range (100KΩ to 100MΩ) Standard tolerance: ±1%, ±5%
65-11-GBC-Y0V1AAN0E-2T8-AM
Features P-LCC-2 package. Colorless clear resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 710 to 1400mcd at 20mA Precondition: Bases on JEDEC J-STD 020D Level 2 Qualification
Description. Applications
2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Features 2.8mmX1.0mm right angle SMT LED, 1.2mm thickness. Low power consumption. Ideal for backlight and indicator. Various colors and lens types
Technical Data Sheet Chip LED with Right Angle Lens
Technical Data Sheet Chip LED with Right Angle Lens Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder
Cylindrical High-Intensity LED (5 mm)
(5 mm) OLLx8C7 Wide viewing angle High-brightness indicator Industry standard lead spacing Unique lens shape for flexible applications Product Photo Here The OLLx8C7 series is designed for superior performance
HL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0.
![HL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0.](/thumbs/94/121763880.jpg "HL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0.")
0.18 [0.01] 0.68 [0.03] 1.10 [0.04] 0.80 [0.03] Features Extremely wide viewing angle Suitable for all SMT assembly and solder process Available on tape and reel Moisture sensitivity level: Level 4 Package:4000pcs/reel
Luxeon V Emitter. power light source. Technical Data DS34
power light source TM Luxeon V Emitter Technical Data DS34 Luxeon TM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light
EVERLIGHT ELECTRONICS CO.,LTD.
Features White SMT package. Optical indicator. Wide viewing angle. Soldering methods: IR reflow soldering. Available on tape and reel. ESD protection Pb-free The product itself will remain within RoHS
Technical Data Sheet Chip LED with Bi-Color(Multi-Color)
Technical Data Sheet Chip LED with Bi-Color(Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Technical Data Sheet 5mm Infrared LED, T-1 3/4
Technical Data Sheet 5mm Infrared LED, T-1 3/4 Features High reliability High radiant intensity Peak wavelength λp=94nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within
19-218/T1D-CQ2R2TY/3T
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
Technical Data Sheet 1206 Package Chip LED (0.5mm Height)
Technical Data Sheet 1206 Package Chip LED (0.5mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Technical Data Sheet Side View LED
Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free The product itself will remain within RoHS compliant version. Descriptions The 57-21series is available in soft orange, green,
SMD Middle Power LED 67-21S/NB3C-D4555B4L12835Z15/2T. Preliminary. Features. Description
Preliminary Features PLCC-2 package Top view Blue LED Wide viewing angle Pb-free RoHS compliant Description The Everlight 67-21S package has high efficacy, middle power consumption, wide viewing angle
Indoor and outdoor displays Backlighting Camera flash RGB full-color displays
x Full-color red/green/blue x PLCC package with 6 pins x Wide viewing angle x High performance x Tuneable color mix Product Photo Here The package design provides wide viewing angle, low power consumption,
Technical Data Sheet 5mm Infrared LED, T-1 3/4
Technical Data Sheet 5mm Infrared LED, T-1 34 Features High reliability High radiant intensity Peak wavelength λp=94nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain within
Mini Top View LEDs EAPL3527GA5
Mini Top View LEDs PRELIMINARY Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow. Computable with automatic placement
SMD B /T3D-AQ1R2TY/3T
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
SMD B A/BHR6GHC-A01/2T
9-237A/BHR6GHC-A/2T eatures Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free.