White Surface Mount LED Lamp

Transcription

1 Side-view white LED Surface mount lead frame package with two pins Wide viewing angles Product Photo Here The is ideal for backlighting LCD screens and for coupling with light guides. This design combines high optical efficiency with wide viewing angles ( = 120, y = 110 ) and low power consumption. Applications LCD backlight Hand-held appliances Indicators Switch and message illumination Part Number Material Emitted Color Intensity Typ. mcd Lens Color GaN White Water Clear DIMENSIONS ARE IN: [MILLIMETERS] INCHES RoHS Moisture DO NOT LOOK DIRECTLY GENERAL TOLERANCE: ± 0.1 AT LED WITH UNSHIELDED PACKAGE: HEAT RESISTANT POLYMER EYES OR DAMAGE TO LEAD FRAME: Cu ALLOY AND Ag PLATING RETINA MAY OCCUR. Phone: (972) or (800) FAX: (972) visibleled@optekinc.com Page 1 of 8

2 Absolute Maimum Ratings T A = 25 o C (on metal core PCB) unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Forward Current Reduction Peak Forward Current (10% Duty Cycle, Pulse Width 10msec) Power Dissipation ESD Threshold (HBM) -40 ~ +100 C -30 ~ +85 C 5 V 30 ma ma/ C 80 ma 120 mw 2000V Electrical Characteristics T A = 25 o C (on metal core PCB) unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS I V Luminous Intensity mcd I F = 20 ma V F Forward Voltage V I F = 20 ma I R Reverse Current µa V R = 5 V 2 ½ 50% Power Angle ---- =120 y= deg I F = 20 ma Ranking Table Applies ---- I F = 20 ma y (see Pages 3 and 5) ---- I F = 20 ma Radiation Pattern X Y Relative Luminous Intensity Relative Luminous Intensity Page 2 of 10 Phone: (972) or (800) FAX: (972) visibleled@optekinc.com

3 Standard Bins (I F = 20 ma) Lamps are sorted to luminous intensity (I V ) and chromaticity coordinates (, y) bins shown. Orders for OVSWAC1R6 may be filled with any or all bins contained as below. Luminous Intensity W V CIE Diagram Y L2 L3 M2 M3 N2 L4 N3 L5 M4 M5 N4 L6 N5 M6 L7 L8 M7 N6 N7 M8 N Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. Luminous intensity measurement allowance ± 5%. 4. coordinates measurement allowance ± To designate luminous intensity ranks or chromaticity bins, please contact OPTEK. X Phone: (972) or (800) FAX: (972) visibleled@optekinc.com Page 3 of 8

4 Standard Bins (I F = 20 ma) Lamps are sorted to luminous intensity (I V ) and chromaticity coordinates (, y) bins shown. Orders for OVSWAC1R6 may be filled with any or all bins contained as below. Rank L2 L3 L y Rank L5 L6 L y Rank L y Rank M2 M3 M y Rank M5 M6 M y Rank M y Rank N2 N3 N y Rank N5 N6 N y Rank N y Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. Luminous intensity measurement allowance ± 5%. 4. coordinates measurement allowance ± To designate luminous intensity ranks or chromaticity bins, please contact OPTEK. Page 4 of 10 Phone: (972) or (800) FAX: (972) visibleled@optekinc.com

5 Series Typical Electro-Optical Characteristics Curves % 100 ma V Forward Current vs Forward Voltage ma Relative Luminous Intensity vs Forward Current y C Relative Luminous Intensity vs Ambient Temperature vs Forward Current 80 % nm Relative Emission Intensity Phone: (972) or (800) FAX: (972) visibleled@optekinc.com Page 5 of 8

6 Packing Information: 7-inch reel Carrier Tape Dimensions: Loaded quantity 3000 pieces per reel Page 6 of 10 Phone: (972) or (800) FAX: (972) visibleled@optekinc.com

7 Moisture Resistant Reel Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label Recommended Soldering Pattern (Unit: mm) Phone: (972) or (800) FAX: (972) Page 7 of 8

8 Page 8 of 10 Phone: (972) or (800) FAX: (972) visibleled@optekinc.com