MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)

Size: px
Start display at page:

Download "MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)"

Transcription

1 MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5. Elimination of lead throughout Applications 1. Bluetooth module 2. CDMA, TDMA, GSM, PCS Phone. RF module of telecommunication products. -Cellular phone, Cordless telephone, Pagers etc. 4. PAM (Power Amp Module) 5. Computer communications, Radar detectors. Ordering Information MI - I J J T (1) (2) () (4) (5) (6) (7) (1) Series () Dimensions The first two : length(mm) The last two : width(mm) (5) Tolerance S : nh J : 5% (2) Material (4) Inductance The first two digits are significant. The last digit is the number of zeros following. N : a decimal point placed between first two digits. (5) Termination J : Nickel barrier (7) Packing B : Bulk pack T : Tape & Reel( 178mm [7inches]) L : Tape & Reel( 254mm [10inches]) Shape and Dimensions unit : mm[inches] Type L W T C(max.) MI [.0201] 0.0 [ ] 0.0 [ ] [.008] MI [ ] [ ] [.0.02] 0.40 [.016]

2 Specifications MI 060 Part No. MI-I060-10NS MI-I060-12NS MI-I060-15NS MI-I060-18NS MI-I060-22NS MI-I060-27NS MI-I060-NS MI-I060-9NS MI-I060-47NS MI-I060-56NS MI-I060-68NJ MI-I060-82NJ MI-I060-J MI-I J MI-I060-J MI-I J MI-I J nh Tolerance MHz Inductance (at MHz) nh 5% Q MIN MHz MHz Q(Typ) 0MHz MHz SRF(MHz) min max DCR( ) typ Rated current (ma) max Test Equipment & Fixture L, Q : RF Impedance Analyzer 4991A(Agilent), Test Fixture 16196C(Agilent) SRF : Network Analyzer 8722ES (Agilent), Rdc : TWA-161A, B Electrical Characteristics Inductance Characteristics Q Characteristics 4

3 5 MI-I5-10NS MI-I5-12NS MI-I5-15NS MI-I5-18NS MI-I5-22NS MI-I5-27NS MI-I5-NS MI-I5-9NS MI-I5-47NS MI-I5-56NS MI-I5-68NJ MI-I5-82NJ MI-I5-J MI-I5-120J MI-I5-J MI-I5-180J MI-I5-220J MI-I5-270J MI-I5-0J MI-I5-90J MI-I5-470J MI-I5-560J MI-I5-680J MI-I5-820J MI-I5-101J Part No. nh Tolerance MHz MHz Q MIN min. SRF(MHz) Q(Typ) Inductance (at MHz) MHz MHz MHz MI 5 DCR( ) Rated current (ma) max. max. typ. Specifications Electrical Characteristics nh 5% Test Equipment & Fixture L, Q : RF Impedance Analyzer 4991A(Agilent), Test Fixture 1619C(Agilent) SRF : Network Analyzer 8722ES (Agilent), Rdc : TWA-161A, B Inductance Characteristics Q Characteristics

4 RELIABILITY AND TEST CONDITIONS MICRO INDUCTORS ITEM Operating temp. range Storage temp. & humidity range Resistance to solder heat Solderability Reflow soldering REQUIREMENTS -55 ~ Max. 70% RH Max. 1. No damage such as cracks should be caused in body element. 2. More than 75% of the terminal electrode shall be covered with new solder.. Inductance chage : within 5% 4. Quality factor change : within 0% 1. More than 90% of the terminal electrode shall be covered with new solder. 2. Inductance chage : within 5%. Quality factor change : within 0% 1. More than 50% of the terminal electrode shall be covered with new solder. at packing condition TEST CONDITION Preheat temperature : to Preheat time : 1 min. Solder temperature : Dipping time : sec Preheat temperature : to Preheat time : 1 min. Solder temperature : Dipping time : 1sec Preheat temperature : Preheat time : 1 min. Solder temperature : 20 Dipping time : 10sec. (Reflow soldering profile) Bending Test 1. No mechanical damage 79

5 MICRO INDUCTORS ITEM REQUIREMENTS TEST CONDITION Drop 1. No mechanical damage Drop 10 times on a concrete floor from a height of 91cm. Vibration Thermal shock (Temperature cycle) 1. No mechanical damage 1. No mechanical damage 2. Inductance change : within 5%. Quality factor change : within 0% Frequency : 10~55~10Hz Amplitude : 1.52 mm Direction and time : X,Y,Z directions for 2 hours Step min. Step min. Number of cycle : times Heat load resistance 1. No mechanical damage 2. Inductance change : within 5%. Quality factor change : within 0% Temperature : 85 2 Applied current : rated current Time : 1,000 hours Measured at room ambient temperature after placing for 24 hours Low temp. resistance 1. No mechanical damage 2. Inductance change : within 5%. Quality factor change : within 0% Temperature : Time : 1,000 hours Measured at room ambient temperature after placing for 24 hours Humidity resistance 1. No mechanical damage 2. Inductance change : within 5%. Quality factor change : within 0% Temperature : 40 2 Humidity : 90~95% RH Time : 500 hours Measured at room ambient temperature after placing for 24 hours Humidity load resistance 1. No mechanical damage 2. Inductance change : within 5%. Quality factor change : within 0% Temperature : 40 2 Humidity : 90~95% RH Applied current : rated current Time : 500 hours Measured at room ambient temperature after placing for 24 hours 80

6 PACKING STANDARD QUANTITY Type Q flty(pcs) REMARKS ,000 10, ,000 BULK CASSETTE 10,000 4,000 4mm pitch 8, ,000 7,000,000 7,000,000 1,500 1, mm 254mm REEL DIMENSION unit:mm R j j Type 060, 5, 1608,, Array 4516, 452, j j2 W W[mm] ] more than 50 less than 1.5 unit:mm TAPING DIMENSION / 8mm wide Embossing Tape unit:mm Sprocket hole j Chip cavity B A P T Ko PRODUCT Type A 0.1 B 0.1 P 0.1 Ko 0.1 T(max.) CHIP BEADS CHIP BEADS ARRAY CHIP FERRITE INDUCTOR CHIP EMI SUPPRESSION FILTER CHIP EMI FILTER ARRAY CHIP LC FILTER CHIP COMMON MODE FILTER CHIP FEEDTHRU CHIP VARISTOR CHIP VARISTOR ARRAY CHIP SURGE ABSORBER

7 Paper Tape unit:mm Sprocket hole j Chip cavity B A P 0.1 T PRODUCT Type A 0.1 B 0.1 P 0.1 T(max.) MICRO INDUCTOR CHIP BEADS CHIP INDUCTOR CHIP VARISTOR CHIP SURGE ARRAY TAPING DIMENSION / 12mm wide Embossing Tape unit:mm Sprocket hole j Chip cavity B A P T Ko PRODUCT Type A 0.1 B 0.1 P 0.1 Ko 0.1 T(max.) CHIP BEADS CHIP FEEDTHRU

8 5 BULK CASSETTE DIMENSION Unit:mm Slider Shutter Connecting Port TOP TAPE STRENGTH The force for tearing off top tape is 20 to 70 grams in the arrow direction. Top tape 165 to 180 Embossing tape TAPING MATERIAL Embossed Tape Paper Tape Top tape Top tape Paper tape Plastic/thermally activated adhesive Embossment Bottom tape Sprocket hole Embossed carrier Chip cavity LEADER AND BLANK PORTION Blank Portions Chip Cavity Blank Portions Leader 10 to 20 pitches 20 to 40 pitches 210mm to 250mm Drawing direction The pitch holes shift within mm for cumulative 10 pitches. 8

9 LAND PATTERN DESIGN BEAD, INDUCTOR, VARISTOR, SURGE ABSORBER ARRAY SIZE a b c Land pattern Land pattern < array> <4 array> SIZE array a b c d array 4 array EMI SUPPRESSION FILTER, LC FILTER, FEEDTHRU CAPACITOR e f Land pattern f Land pattern < size> <, 4516 size> SIZE a b c d e f

10 LAND PATTERN DESIGN COMMON MODE FILTER, VARISTOR ARRAY SIZE POLE(Array) a b c d 2 POLE 2 Array 2 POLE 2 Array ÆEMI FILTER ARRAY Land pattern e SIZE POLE(Array) a b c d e 4 Array

11 SOLDERING PROFILE REFLOW SOLERING PROFILE preheating sec. max. soldering 10 sec. max. cooling 60 sec. min sec. max. 60 sec. min. FLOW SOLDERING PROFILE preheating sec. max. dipping 10 sec. max. cooling 60 sec. min sec. min. MANUAL SOLDERING 00 solder iron max. 0W T /0.5 sec. Tc soldering 2 sec. max. Diameter of solder iron 1.2 mm max. 86

CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)

CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5) CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal

More information

CHIP FERRITE BEADS ARRAY

CHIP FERRITE BEADS ARRAY CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single

More information

ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :

ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec

More information

Chip Beads & Inductors

Chip Beads & Inductors Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case

More information

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic

More information

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic

More information

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic

More information

WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES

WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone

More information

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic

More information

Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application

Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series

More information

Wire Wound Chip Inductors LPI0805FT Series

Wire Wound Chip Inductors LPI0805FT Series INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed

More information

Chip Beads & Inductors

Chip Beads & Inductors Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding

More information

INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions

INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by

More information

RF WIREWOUND CHIP INDUCTORS

RF WIREWOUND CHIP INDUCTORS RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors

More information

Multilayer Ferrite Chip Inductor

Multilayer Ferrite Chip Inductor FEATURES Skywell multiplayer chip inductor is formed without a wound wire and has a closed magnetic circuit formed by simultaneous forming of alternative layers of ferrite paste and conductor paste. High

More information

Shielded Power Inductors TL1010SG Series

Shielded Power Inductors TL1010SG Series Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature

More information

Cal-Chip Electronics, Inc.

Cal-Chip Electronics, Inc. Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated

More information

IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS

IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables

More information

VI TELEFILTER Filter Specification TFS 70U - 1/5

VI TELEFILTER Filter Specification TFS 70U - 1/5 Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics

More information

ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805

ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805 SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design

More information

SPECIFICATION FOR APPROVAL INDEX

SPECIFICATION FOR APPROVAL INDEX SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED

More information

Power Inductors, Shielded

Power Inductors, Shielded The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss

More information

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:

More information

VI TELEFILTER Filter Specification TFS 211 C 1/5

VI TELEFILTER Filter Specification TFS 211 C 1/5 Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω

More information

Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications

Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for

More information

Vectron International Filter specification TFS 121 1/5

Vectron International Filter specification TFS 121 1/5 Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics

More information

VI TELEFILTER Filter Specification TFS 246 H4 1/5

VI TELEFILTER Filter Specification TFS 246 H4 1/5 Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh

More information

FrelTec GmbH. Multilayer Ferrite Chip Inductor SMD

FrelTec GmbH. Multilayer Ferrite Chip Inductor SMD GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/17 GmbH www.freltec.com SPECIFICATION Part Number 197 05 * 151 * S * J * E02 Type Size Value Material Toleranc e Packing 197 : SMD Multilayer

More information

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code

More information

YAGEO CORPORATION SMD INDUCTOR / BEADS

YAGEO CORPORATION SMD INDUCTOR / BEADS YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design

More information

INPAQ. Specification. MCB 1005 B Series. Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ Global RF/Component Solutions

INPAQ. Specification. MCB 1005 B Series. Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ Global RF/Component Solutions MCB 1005 B Series Specification Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ 1005 RoHS Pb Chip Ferrite Bead (MCB-B Series) Engineering Spec. This product belongs to the industrial grade

More information

Notice for TAIYO YUDEN products

Notice for TAIYO YUDEN products Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein

More information

AMCA R450G-S1F-T3 Pb

AMCA R450G-S1F-T3 Pb FEATURES APPLICATIONS 2450MHz, bandwidth 90MHz Small size - 3.2 x 1.6 x 1.2mm (0.125 x 0.62 x 0.047 inch) Gain 0.5dBi (Peak) / -1dBi (Average) VSWR

More information

Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS

Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:

More information

Wire Wound Chip Inductor

Wire Wound Chip Inductor Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up

More information

Notice for TAIYO YUDEN products

Notice for TAIYO YUDEN products Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 214. All of the contents specified herein are

More information

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance

More information

VI TELEFILTER Filter specification TFS 70Z 1/5

VI TELEFILTER Filter specification TFS 70Z 1/5 VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics

More information

VI TELEFILTER Filter specification TFS 248F 1/5

VI TELEFILTER Filter specification TFS 248F 1/5 VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference

More information

Vectron International Filter specification TFS1255A 1/5

Vectron International Filter specification TFS1255A 1/5 Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

Vectron International Resonator Specification TFR 832 1/5

Vectron International Resonator Specification TFR 832 1/5 Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips. Three Terminal Chips

Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips. Three Terminal Chips Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability

More information

Vectron International Filter specification TFS 400P 1/5

Vectron International Filter specification TFS 400P 1/5 Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics

More information

SMT Ferrite Chip Inductor SFI201212S Series

SMT Ferrite Chip Inductor SFI201212S Series Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated

More information

SMA100. Top Port Analog MEMS Microphone. Datasheet. Rev. 2.0

SMA100. Top Port Analog MEMS Microphone. Datasheet. Rev. 2.0 Top Port Analog MEMS Microphone Datasheet Rev. 2.0 This specification is subject to change without notice. Senodia Technologies Corporation assumes no responsibility for any errors contained herein. Copyright

More information

VI TELEFILTER Filter specification TFS /5

VI TELEFILTER Filter specification TFS /5 VI TELEFILTER Filter specification TFS 1227 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum

More information

Vectron International Filter specification TFS1590 1/5

Vectron International Filter specification TFS1590 1/5 Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Vectron International Filter specification TFS 125P 1/5

Vectron International Filter specification TFS 125P 1/5 Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics

More information

SPECIFICATION FOR APPROVAL PAGE: 1

SPECIFICATION FOR APPROVAL PAGE: 1 PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b

More information

Vectron International Filter specification TFS1575AG 1/5

Vectron International Filter specification TFS1575AG 1/5 Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:

More information

Vectron International Diplexer specification TDX1227 1/7

Vectron International Diplexer specification TDX1227 1/7 Vectron International Diplexer specification TDX1227 1/7 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: 50 Ohm (all ports) Characteristics D a t a L

More information

TELEFILTER Filter Specification TFS 141 C 1/5

TELEFILTER Filter Specification TFS 141 C 1/5 TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics

More information

Notice for TAIYO YUDEN Products

Notice for TAIYO YUDEN Products Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is

More information

VI TELEFILTER Filter specification TFS 230 1/5

VI TELEFILTER Filter specification TFS 230 1/5 VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3

More information

VI TELEFILTER Filter specification TFS 915D 1/5

VI TELEFILTER Filter specification TFS 915D 1/5 Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation

More information

VI TELEFILTER Filter specification TFS 130C 1/5

VI TELEFILTER Filter specification TFS 130C 1/5 VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics

More information

Vectron International Filter specification TFS140AV 1/5

Vectron International Filter specification TFS140AV 1/5 Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics

More information

Vectron International Temperatur sensor specification TFSS434B 1/6

Vectron International Temperatur sensor specification TFSS434B 1/6 Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics

More information

Vectron International Filter specification TFS 737 1/5

Vectron International Filter specification TFS 737 1/5 Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The

More information

YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...

YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc... YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication

More information

YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents

YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type

More information

RoHS INPAQ TECHNOLOGY CO., LTD. LFA0805 SERIES (LC Filter Array) Engineering Specification

RoHS INPAQ TECHNOLOGY CO., LTD. LFA0805 SERIES (LC Filter Array) Engineering Specification LFA0805 SERIES (LC Filter Array) 1. Scope This specification is applicable to LC Filter Array series product. The customer designed part number drawing take precedence over this specification. The LC Filter

More information

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI- 700705- R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code

More information

INPAQ Global RF/Component Solutions

INPAQ Global RF/Component Solutions MCM 3216 B Series Specification Product Name Series Chip Common Mode Filter MCM B Series Size EIAJ 3216 MCM3216B SERIES (Chip Common Mode Filter) Engineering Specification Features and Application.Powerful

More information

Kun Shan MAZO tech Co., Ltd

Kun Shan MAZO tech Co., Ltd Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material

More information

Approval sheet. WQCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-Q200. *Contents in this sheet are subject to change without prior notice.

Approval sheet. WQCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-Q200. *Contents in this sheet are subject to change without prior notice. WCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-200 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V4.0_Auto Jun. 2017 FEATURES 1. Ceramic structure

More information

Kun Shan MAZO tech Co., Ltd

Kun Shan MAZO tech Co., Ltd Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material

More information

Vectron International Filter specification TFS 1227A 1/5

Vectron International Filter specification TFS 1227A 1/5 Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics

More information

ULTRA LOW POWER SMD METAL STRIP RESISTORS

ULTRA LOW POWER SMD METAL STRIP RESISTORS Features These specification covers 2512 sized high power low resistance current sensing metal resistors. PART NUMBERING SYSTEM: - 2512 A 1W R005 F E C Type Dimensions Code 2512 Construction Resistance

More information

Thin Film Precision Chip Resistor (AR Series)

Thin Film Precision Chip Resistor (AR Series) Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor

More information

Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]

Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.

More information

Vectron International Filter specification TFS1220 1/5

Vectron International Filter specification TFS1220 1/5 Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics

More information

Vectron International Filter specification TFS 869K 1/5

Vectron International Filter specification TFS 869K 1/5 Vectron International Filter specification TFS 869K 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Vectron International Filter specification TFS 1575AA 1/5

Vectron International Filter specification TFS 1575AA 1/5 Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

Vectron International Temperatur sensor specification TFSS433D 1/6

Vectron International Temperatur sensor specification TFSS433D 1/6 Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:

More information

Vectron International Filter specification TFS 400L 1/5

Vectron International Filter specification TFS 400L 1/5 Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:

More information

Vectron International Filter specification TFS 868P 1/5

Vectron International Filter specification TFS 868P 1/5 Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics

More information

Vectron International Filter specification TFS 500 1/5

Vectron International Filter specification TFS 500 1/5 Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite

More information

VI TELEFILTER Preliminary specification TFS 1575N 1/5

VI TELEFILTER Preliminary specification TFS 1575N 1/5 VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The

More information

Notice for TAIYO YUDEN Products

Notice for TAIYO YUDEN Products Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment (Automotive / Industrial Equipment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information

More information

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 104R - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance

More information

(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:

(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web: Version: January 13, 2017 (TRMA) Multilayer Ferrite Beads Chip Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,

More information

VI TELEFILTER Filter specification TFS /5

VI TELEFILTER Filter specification TFS /5 VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum

More information

Vectron International Filter specification TFS455D 1/5

Vectron International Filter specification TFS455D 1/5 Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

10 nh Inductor (Top View)

10 nh Inductor (Top View) SMD High- RF Inductor nh Inductor (Top View) ACCU- TECHNOOGY The SMD Inductor is based on thin-film mul ti lay er technology. This technology provides a level of control on the elec tri cal and physical

More information

Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions

Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television

More information

Vectron International Filter specification TFS 243E 1/5

Vectron International Filter specification TFS 243E 1/5 Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics

More information

Kun Shan MAZO tech Co., Ltd

Kun Shan MAZO tech Co., Ltd Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core

More information

Vectron International Filter specification TFS 522 1/5

Vectron International Filter specification TFS 522 1/5 Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Thin Film Current Sensing Chip Resistor (TCS Series)

Thin Film Current Sensing Chip Resistor (TCS Series) (TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity

More information

Vectron International Filter specification TFS 867A 1/5

Vectron International Filter specification TFS 867A 1/5 Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

CR0603/CR0805/CR Chip Resistors

CR0603/CR0805/CR Chip Resistors *RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer

More information

Chip Array Resistor INTRODUCTION FEATURE AND APPLICATION. Feature. Application

Chip Array Resistor INTRODUCTION FEATURE AND APPLICATION. Feature. Application INTRODUCTION Chip array resistors are general passive component which is useful for derating voltage, current controlling in circuit and surface mounting is available. Samsung electro-mechanics manufactures

More information

Types MC and MCN Multilayer RF Capacitors

Types MC and MCN Multilayer RF Capacitors High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged fexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren

More information

MARUWA GENERAL CATALOG. Chip Type EMI Filters. Automotive electronics. Computer & peripherals. Digital TV

MARUWA GENERAL CATALOG. Chip Type EMI Filters. Automotive electronics. Computer & peripherals. Digital TV hip Type EMI ilters Series (Pages) Style Equivalent circuit eatures pplications L compound EMI ilter L Series (P42) hip type EMI ilter N,NH Series (P43) EMI chip filter with the circuit formation The sharp

More information

(LRP) Metal Strip Chip High Power Low Ohmic Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web:

(LRP) Metal Strip Chip High Power Low Ohmic Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web: Version: January 12, 2017 (LRP) Metal Strip Chip High Power Low Ohmic Resistor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,

More information

Type CPF Series. Thin Film Precision Resistors. Key Features

Type CPF Series. Thin Film Precision Resistors. Key Features Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and

More information