Chip Bead UPB Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
|
|
|
- Betty Banks
- 5 years ago
- Views:
Transcription
1 AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering UPB 155 T - 6 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance x.5x.5 T Tape and eel 6 6 Y ±25% x.8x.5 B Bulk x.8x x1.25x x1.6x1.1 Internal Code ecommend eflow Profile
2 AEC-Q2 UPB155 - AU Type Dimensions ecommended Land Pattern Electrical Characteristics unit:mm unit:mm Part No. Impedance Test Freq. DC ated Current (Ω) (Ω)Max. (ma)max. UPB155T-33Y-AU 33 1 MHz,2 mv.22 3 UPB155T-6Y-AU 6 1 MHz,2 mv UPB155T-8Y-AU 8 1 MHz,2 mv UPB155T-121Y-AU 12 1 MHz,2 mv.55 2 UPB155T-221Y-AU 22 1 MHz,2 mv.1 14 Note: When ordering, please specify tolerance code. Tolerance: Y=±25% 1. Operating temperature range -4 ~125 (Including self - temperature rise) 2. ate Current:Applied the current to coils, the temperature rise shall not be more than 3 3. Measure Equipment: : HP4291A DC: HP4338B or CHEN HWA 52
3 AEC-Q2 UPB155 - AU Type Characteristics Graph 6 UPB155T-33Y-AU 12 UPB155T-6Y-AU 12 UPB155T-8Y-AU FEQUENCY (MHz) DC<.22 Ω ated Current :3 ma FEQUENCY (MHz) DC<.32 Ω ated Current :25 ma FEQUENCY (MHz) DC<.38 Ω ated Current :23 ma UPB155T-121Y-AU FEQUENCY (MHz) DC<.55 Ω ated Current :2 ma UPB155T-221Y-AU FEQUENCY (MHz) DC<.1 Ω ated Current :14 ma
4 AEC-Q2 UPB AU Type Dimensions ecommended Land Pattern Electrical Characteristics unit:mm unit:mm Part No. Impedance Test Freq. DC ated Current (Ω) (Ω)Max. (ma)max. UPB1685T-26Y-AU 26 1 MHz,2 mv.7 6 UPB1685T-3Y-AU 3 1 MHz,2 mv.7 6 UPB1685T-121Y-AU 12 1 MHz,2 mv.25 3 UPB1685T-221Y-AU 22 1 MHz,2 mv.4 25 UPB1685T-331Y-AU 33 1 MHz,2 mv.7 15 Note: When ordering, please specify tolerance code. Tolerance: Y=±25% 1. Operating temperature range -4 ~125 (Including self - temperature rise) 2. ate Current:Applied the current to coils, the temperature rise shall not be more than 3 3. Measure Equipment: : HP4291A DC: HP4338B or CHEN HWA 52
5 AEC-Q2 UPB AU Type Characteristics Graph UPB1685T-26Y-AU FEQUENCY (MHz) DC<.7 Ω ated Current: 6 ma UPB1685T-3Y-AU FEQUENCY (MHz) DC<.7 Ω ated Current: 6 ma UPB1685T-121Y-AU FEQUENCY (MHz) DC<.25 Ω ated Current: 3 ma 3 UPB1685T-221Y-AU 5 UPB1685T-331Y-AU FEQUENCY (MHz) DC<.4 Ω ated Current: 25 ma FEQUENCY (MHz) DC<.7 Ω ated Current: 15 ma
6 AEC-Q2 UPB AU Type Dimensions ecommended Land Pattern Electrical Characteristics unit:mm unit:mm Part No. Impedance Test Freq. DC ated Current (Ω) (Ω)Max. (ma)max. UPB1688T-1Y-AU 1 1 MHz,2 mv.1 5 UPB1688T-3Y-AU 3 1 MHz,2 mv UPB1688T-6Y-AU 6 1 MHz,2 mv.2 4 UPB1688T-7Y-AU 7 1 MHz,2 mv.2 4 UPB1688T-11Y-AU 1 1 MHz,2 mv.3 3 UPB1688T-121Y-AU 12 1 MHz,2 mv.3 3 UPB1688T-181Y-AU 18 1 MHz,2 mv.5 2 UPB1688T-221Y-AU 22 1 MHz,2 mv.4 25 Note: When ordering, please specify tolerance code. Tolerance: Y=±25% 1. Operating temperature range -4 ~125 (Including self - temperature rise) 2. ate Current:Applied the current to coils, the temperature rise shall not be more than 3 3. Measure Equipment: : HP4291A DC: HP4338B or CHEN HWA 52
7 AEC-Q2 UPB AU Type Characteristics Graph UPB1688T-1Y-AU FEQUENCY (MHz) DC<.1 Ω ated Current :5 ma UPB1688T-3Y-AU FEQUENCY (MHz) DC<.15 Ω ated Current :45 ma UPB1688T-6Y-AU FEQUENCY (MHz) DC<.2 Ω ated Current :4 ma UPB1688T-7Y-AU FEQUENCY (MHz) DC<.2 Ω ated Current :4 ma UPB1688T-11Y-AU FEQUENCY (MHz) DC<.3 Ω ated Current :3 ma UPB1688T-121Y-AU FEQUENCY (MHz) DC<.3 Ω ated Current :3 ma 25 UPB1688T-181Y-AU 25 UPB1688T-221Y-AU FEQUENCY (MHz) DC<.5 Ω ated Current :2 ma FEQUENCY (MHz) DC<.4 Ω ated Current :25 ma
8 AEC-Q2 UPB AU Type Dimensions ecommended Land Pattern Electrical Characteristics unit:mm unit:mm Part No. Impedance Test Freq. DC ated Current (Ω) (Ω)Max. (ma)max. UPB2129T-15Y-AU 15 1 MHz,2 mv.12 6 UPB2129T-22Y-AU 22 1 MHz,2 mv.12 6 UPB2129T-3Y-AU 3 1 MHz,2 mv.12 6 UPB2129T-5Y-AU 5 1 MHz,2 mv.15 6 UPB2129T-6Y-AU 6 1 MHz,2 mv.18 6 UPB2129T-8Y-AU 8 1 MHz,2 mv.2 6 UPB2129T-11Y-AU 1 1 MHz,2 mv.2 5 UPB2129T-121Y-AU 12 1 MHz,2 mv.2 5 UPB2129T-221Y-AU 22 1 MHz,2 mv.4 3 UPB2129T-31Y-AU 3 1 MHz,2 mv.5 3 UPB2129T-331Y-AU 33 1 MHz,2 mv.5 3 Note: When ordering, please specify tolerance code. Tolerance: Y=±25% 1. Operating temperature range -4 ~125 (Including self - temperature rise) 2. ate Current:Applied the current to coils, the temperature rise shall not be more than 3 3. Measure Equipment: : HP4291A DC: HP4338B or CHEN HWA 52
9 AEC-Q2 UPB AU Type Characteristics Graph UPB2129T-15Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB2129T-22Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB2129T-3Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB2129T-5Y-AU FEQUENCY (MHz) DC<.15 Ω ated Current :6 ma UPB2129T-6Y-AU FEQUENCY (MHz) DC<.18 Ω ated Current :6 ma IMPEDANCE(Ω ) UPB2129T-8Y-AU FEQUENCY (MHz) DC<.2 Ω ated Current :6 ma 14 UPB2129T-11Y-AU 14 UPB2129T-121Y-AU 3 UPB2129T-221Y-AU FEQUENCY(MHz) DC<.2 Ω ated Current :5 ma FEQUENCY (MHz) DC<.2 Ω ated Current :5 ma FEQUENCY(MHz) DC<.4 Ω ated Current :3 ma 35 UPB2129T-31Y-AU 35 UPB2129T-331Y-AU FEQUENCY(MHz) DC<.5 Ω ated Current :3 ma FEQUENCY(MHz) DC<.5 Ω ated Current :3 ma
10 AEC-Q2 UPB AU Type Dimensions ecommended Land Pattern Electrical Characteristics unit:mm unit:mm Part No. Impedance Test Freq. DC ated Current (Ω) (Ω)Max. (ma)max. UPB321611T-3Y-AU 3 1 MHz,2 mv.12 6 UPB321611T-5Y-AU 5 1 MHz,2 mv.12 6 UPB321611T-6Y-AU 6 1 MHz,2 mv.12 6 UPB321611T-8Y-AU 8 1 MHz,2 mv.12 6 UPB321611T-11Y-AU 1 1 MHz,2 mv.12 6 UPB321611T-121Y-AU 12 1 MHz,2 mv.12 6 UPB321611T-151Y-AU 15 1 MHz,2 mv.2 45 UPB321611T-221Y-AU 22 1 MHz,2 mv.2 45 Note: When ordering, please specify tolerance code. Tolerance: Y=±25% 1. Operating temperature range -4 ~125 (Including self - temperature rise) 2. ate Current:Applied the current to coils, the temperature rise shall not be more than 3 3. Measure Equipment: : HP4291A DC: HP4338B or CHEN HWA 52
11 AEC-Q2 UPB AU Type Characteristics Graph UPB321611T-3Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB321611T-5Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB321611T-6Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB321611T-8Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB321611T-151Y-AU FEQUENCY (MHz) DC<.2 Ω ated Current :45 ma UPB321611T-11Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma UPB321611T-221Y-AU FEQUENCY(MHz) DC<.2 Ω ated Current :45 ma UPB321611T-121Y-AU FEQUENCY (MHz) DC<.12 Ω ated Current :6 ma
12 AEC-Q2 eliability 1-1.Mechanical Performance No Item Specification Test Method Board Flex The forces applied on the right efer to AEC-Q2-5 conditions must not damage the terminal electrode and the ferrite Test device shall be soldered on the substrate Substrate Dimension: 1x4x1.6mm Deflection: 2.mm Keeping Time: 6 sec esistance to Soldering Heat Appearance: No damage efer to MIL-STD-22 Method 21 Impedance change shall be Pre-heating: 15-2, 6-1 sec within±3% Above 217, 6-15 secs Peak Temperature: 26±5, 2-4 sec Cycles : 2 times Solder ability The electrodes shall be at efer to J-STD-2 least 95% covered with new Pre-heating: 15, 1min solder coating Solder Composition: Sn/Ag3./Cu.5(Pb-Free) Solder Temperature: 245±5 (Pb-Free) Immersion Time: 4±1sec Terminal Strength Test The chip must not damage the efer to AEC-Q2-6 terminal electrode and the Test device shall be soldered on the substrate ferrite Force 2N for 6±1 seconds for 63 Series Force 5N for 6±1 seconds for 15 Series Force 1N for 6±1 seconds for 168 Series Force 1.8Kg for 6±1 seconds for the other Series Chip F Mounting Pad Vibration Test Appearance: No damage efer to MIL-STD-22 Method 24 Vbration waveform: Sine waveform Impedance change shall be Vibration frequency: 1Hz~2Hz within±3% Vibration acceleration: 5g 1Hz-2kHz and back to 1Hz should be down in 2 minutes Duration of test: 12 cycles each of 3 orientations, 2 minutes for each cycle, 12 hr total Vibration axes:, Y & Mechanical Shock Test Appearance: No damage efer to MIL-STD-22 Method 213 Units are non-operating. Impedance change shall be Pulse shape : Half-sine waveform within±3% Impact acceletation : 1 g Pulse duration : 6 ms Number of shocks : 18 shocks ( 3 shocks for each face) Physical Dimension The chip must not damage the efer to JESD22 Method JB-1 terminal electrode and the Verify physical dimensions to the applicable device ferrite specification. Note : User(s) and Suppliers spec. Electrical Test not equired esistance to Solvent There must be no change in efer to MIL-STD-22 Method 215 appearance or obliteration of Inductors must withstand 6 mimutes of alcohol or water marking ESD Appearance: No damage efer to AEC-Q2-2 Impedance change shall be ESD ank 2 :2kV within±3%
13 AEC-Q2 eliability 1-2.Environmental Performance No Item Specification Test Method Temperature Cycle Appearance: No damage efer to JESD Method JA-14 Impedance change shall be Total cycles: 1 cycles within±3% 3 minutes exposure to -4 3 minutes exposure to min. maximum transition between temperatures Measured after exposure in the room condition for 24hrs Biased Humidity esistance efer to MIL-STD-22 Method 13 Temperature: 85±2 elative Humidity:85% / Time: 1hrs Measured after exposure in the room condition for 24hrs High Temperature Exposure efer to MIL-STD-22 Method 18 (Storage) Temperature: 125±3 / elative Humidity: % Time: 1hrs Measured after exposure in the room condition for 24hrs Operational Life Appearance: No damage Temperature: 125±3 Impedance change shall be Applied Current: ated Current /Time: 1hrs within±3% Measured after exposure in the room condition for 24hrs If the rated current of parts exceed 1A,the operating temperature should be 85
14 AEC-Q2 Packaging Tape Dimensions Tape Material eel Dimensions Dimensions in mm Tape Dimensions eel Dimensions TYPE A B T W P F K Tape A B C D UPB B UPB B UPB B UPB B UPB A Quantity PCS / eel
Chip Bead PBY Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering PBY 155 T - 4 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 633.6x.3x.3 T Tape and eel 4 4 Y ±25% 155 1.x.5x.5
Power Inductor SCD Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering SCD 321 T - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 321 3.3x3.x2.1 R47.47 K ±1% 43 4.5x4.x3.2 1R 1.
Power Inductor MHCC/MHCI Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering MHCI 42-1R M - R8AU Series Name Dimensions Code Inductance (mm) (uh) Tolerance Internal Code 412 4.1x4.6x1.2 R22.22 M ±2% R8AU 42B 4.2x4.7x2.
Commom Mode Choke CUW Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering CUW 43 T - T - AU Series Name Dimensions Code Inductance Category (mm) (uh) Tolerance 43 4.5x3.2x2.6 T 51 T ±30% M 100 Internal Code Recommend
Cal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions
Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television
Multi-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BF T T S PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (MHz~) BS : For Higher Speed Signal Lines (MHz~) DIMENSION
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
Spec. No.: RBX K HTS-1 /2 Date: 217. 4. 21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RBX16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen
Data sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
Chip Beads & Inductors
Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case
This specification applies for the RMS series of Anti-Sulfurated thick film chip resistors made by TA-I. RMS 10 J T 103.
page number 1/13 1. Scope : This specification applies for the RMS series of Anti-Sulfurated thick film chip resistors made by TA-I. 2. Construction: Over Coat (Color : Black) Conductor Sn Plating Ceramic
Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal
RMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
INDEX. ISO-9002 Certified YAGEO CORPORATION
INDE 2 Multilayer Ferrite Chip Beads [ SB/PB/UP/NB/GB Series ] 22 Multilayer Ferrite Chip Beads [ BA Series ] 26 Surface Mount Beads [ FB Series ] 3 EMI PC Beads [ SBC Series ] 33 Data Line EMI Filter
DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PA_E series 5%, 1%, 0.5% sizes 2512
Product specification January 31, 2018 V. DATA SHEET CURRENT SENSOR - LOW TCR AUTOMOTIVE GRADE PA_E series 5%, 1%, 0.5% sizes 2512 RoHS compliant & Halogen free Product specification 2 SCOPE This specification
SPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS Metal Film Precision Resistor CSRV-Serie Version August
Ferrite beads...2 Parts number Legend...2 Competitor Cross...3 Reliability and Test Condition Derating Curve...5. Soldering...
Table of Contents The 15 to 186 series ranger of Miniature Ferrite beads contains the very latest in multi layer ferrite beads technology, thus providing the ultimate in performance demanded by today's
Metal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) HIGH RELIABILITY AEC-Q200 QUALIFIED (see part numbering system for details) THIN FILM CONSTRUCTION AVAILABLE IN PRECISION TOLERANCE
Approval sheet. WQCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-Q200. *Contents in this sheet are subject to change without prior notice.
WCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-200 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V4.0_Auto Jun. 2017 FEATURES 1. Ceramic structure
YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
Automotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Part Number PE-20ACCXXXSTS Common Mode Impedance (0MHZ) Min Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and
AEC-Q200 Compliant with AEC-Q200 standard. Miniature and light weight. Suit for reflow and wave flow solder
Thick Film Chip Fixed Resistor Automotive Grade Features AEC-Q200 Compliant with AEC-Q200 standard Miniature and light weight Suit for reflow and wave flow solder Stable electrical capability,high reliability
AEC-Q200 Compliant with AEC-Q200 standard. Miniature and light weight. Suit for reflow and wave flow solder
Anti-Sulfurated Thick Film Chip Fixed Resistor Automotive Grade Features AEC-Q200 Compliant with AEC-Q200 standard Miniature and light weight Suit for reflow and wave flow solder Stable electrical capability,high
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMAW K HTS-0001 /5 Date: 2017. 4. 21 Data sheet : ANTI-SULFURATION RMAW10,16,20,32 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C
SPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
MELF Coated Thin Film Precision Resistors (MELFC Series)
Features: Precision TCR of 0, 5, 25 & 50ppm/ C High reliability and stability of ±0. and ±0.5% Excellent pulse load capability Strong mechanical body due to cylindrical shape AEC-Q200 compliant RoHS and
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
Automotive Grade Thick Film Array Chip Resistor
CN.. Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -EC-Q200 Compliance -Small size and light weight -Reduction
ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
High Voltage Thick Film Chip Resistors Product Specification
Page No 1/10 1 Scope: 11 This specification is applicable to lead and halogen free for RTV series thick film chip resistors 12 Lead free products mean lead free termination meets RoHS requirement Pb contained
RALEC 旺詮. Scope: 2 (EX) request. IE-SP /01/05. Released Date Page No. Remark. Series. Resistance Tolerance. Nominal Resistance.
RTH High Power Thick Film Chip Document No. Released Date Page No. IE-SP-030 2018/01/05 1 1 Scope: 1.1 This specification is applicable to lead-free and halogen-free RTH series high power thick film chip
YAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
SMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
RF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
Data Sheet. Customer: Metal Film Precision MELF Resistor-CSRV Series Size: 0102/0204/0207
Data Sheet Customer: Product: -CSRV Series Size: 02/0204/0207 Issued Date: Edition: 04-Aug-17 REV.B VIKING TECH CORPORATION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303, Taiwan TEL:886-3-5972931
0402ESDA-AEC Automotive grade ESD suppressor
Technical Data 10763 Automotive grade ESD suppressor Pb HALOGEN HF FREE Product features AEC-Q200 qualifed Ultra-low capacitance (0.05 pf) ideal for high speed data applications Provides Electro Static
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
External Dimensions (L W) (mm) 1005 [0402] [0603] Feature Code. Packing Tape & Reel. Type L W T a GZ1005 [0402]
![External Dimensions (L W) (mm) 1005 [0402] [0603] Feature Code. Packing Tape & Reel. Type L W T a GZ1005 [0402]](/thumbs/96/126844057.jpg "External Dimensions (L W) (mm) 1005 [0402] [0603] Feature Code. Packing Tape & Reel. Type L W T a GZ1005 [0402]")
Multilayer Chip Ferrite Bead G-C Series Operating Temp. : -55 ~ +25 FEATUES Internal silver printed layers and magnetic shielded structures to minimize crosstalk Can be used in a wide range of frequency
INPAQ. Specification. MCB 1005 B Series. Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ Global RF/Component Solutions
MCB 1005 B Series Specification Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ 1005 RoHS Pb Chip Ferrite Bead (MCB-B Series) Engineering Spec. This product belongs to the industrial grade
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
Low Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
July Chip beads. For general signal line. MMZ series (for automobiles) MMZ2012 Type. * Dimensions code JIS[EIA]
![July Chip beads. For general signal line. MMZ series (for automobiles) MMZ2012 Type. * Dimensions code JIS[EIA]](/thumbs/75/72092013.jpg "July Chip beads. For general signal line. MMZ series (for automobiles) MMZ2012 Type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s July 216 Chip beads For general signal line MM series (for automobiles) MM212 Type MM212 212[85 inch]* * Dimensions code JIS[EIA] (2/11) eminders for using these products Before
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
July Chip Beads. For signal line. HFxxACB series. * Dimensions Code JIS[EIA]
![July Chip Beads. For signal line. HFxxACB series. * Dimensions Code JIS[EIA]](/thumbs/89/99025589.jpg "July Chip Beads. For signal line. HFxxACB series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 203 Chip Beads For signal line HFxxACB series HFxxACB202 HFxxACB326 HFxxACB3225 HFxxACB4532 [0805 inch]* [206 inch] [2 inch] [82 inch] * Dimensions Code JIS[EIA] (2/7) EMINDES
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
GENERAL PURPOSE CHIP RESISTORS RC0805 5%, 1%, 0.5%, 0.1% RoHS Compliant & Halogen Free.
GENERAL PURPOSE CHIP RESISTORS RC080 %, 1%, 0.%, 0.1% RoHS Compliant & Halogen Free Product specification - July 26, 2016 V0 SCOPE Chip Resistor Surface Mount RC SERIES 080 This specification describes
ISA-PLAN // Precision resistors. SMT // Size Features
Features 5 W power rating at 05 C Constant current up to 35 A (4 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant
DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/0805/1206/1210/1218/2010/2512
Product specification October 02, 2017 V.6 DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free SR SERIES 0402/0603/005/1206/1210/121/2010/2512
Shielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
DATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50
Product specification March 14, 2016 V.0 DATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50 sizes 0402/0603/0805/1206 RoHS compliant & Halogen Free Product
LR Series. Construction. Application. Features
Metal Alloy Low-Resistance Resistor LR Series Construction Application Power supply Battery pack DIY tools Inverter/Converter (AC/DC, DC/DC, DC/AC) Measurable instrument Consumer electronics Note book
Data sheet ESD SUPPRESSOR; RECTANGULAR TYPE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: HSPC K HTS 0001 /4 Date: 2017. 4. 21 Data sheet Title: Style: HSPC10, 16 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative humidity:
DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/0805/1206/1210/1218/2010/2512
Product specification September 27, 201 V.7 DATA SHEET SURGE CHIP RESISTORS AUTOMOTIVE GRADE SR series 20%, 10%, 5% sizes 0402/0603/005/1206/1210/121/2010/2512 RoHS compliant & Halogen free Product specification
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%, 0.5%, 0.1% Product specification June 25, 2014 V.5. RoHS compliant
Product specification June 25, 2014 V.5 1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 SCOPE This specification describes 1206 series chip
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%
1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1% RoHS compliant Product specification Jul 02, 200 V.4 Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes
SPECIFICATION FOR APPROVAL PAGE: 1
PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
May Chip beads. For power line. MPZ series (for automotive) MPZ2012 type. * Dimensions code JIS[EIA]
![May Chip beads. For power line. MPZ series (for automotive) MPZ2012 type. * Dimensions code JIS[EIA]](/thumbs/82/85101167.jpg "May Chip beads. For power line. MPZ series (for automotive) MPZ2012 type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s May 218 Chip beads For power line MP series (for automotive) MP212 212[85 inch]* * Dimensions code JIS[EIA] (2/1) EMINDES FO USING THESE PODUCTS Before using these products, be
March Chip beads. For general signal line Soft termination. KMZ-HR series (for automobiles) KMZ1608-HR type. * Dimensions code JIS[EIA]
![March Chip beads. For general signal line Soft termination. KMZ-HR series (for automobiles) KMZ1608-HR type. * Dimensions code JIS[EIA]](/thumbs/72/67513904.jpg "March Chip beads. For general signal line Soft termination. KMZ-HR series (for automobiles) KMZ1608-HR type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s March 217 Chip beads For general signal line Soft termination KM-H series (for automobiles) KM168-H type KM168-H 168[63 inch]* * Dimensions code JIS[EIA] (2/11) EMINDES FO USING
RF Inductor Series. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 23, 2018
Version: July 23, 2018 Electronics Tech. RF Inductor Series Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang Ye Road,
July Chip beads. For general signal line. MMZ series (for automobiles) MMZ1005 Type. * Dimensions code JIS[EIA]
![July Chip beads. For general signal line. MMZ series (for automobiles) MMZ1005 Type. * Dimensions code JIS[EIA]](/thumbs/77/75721469.jpg "July Chip beads. For general signal line. MMZ series (for automobiles) MMZ1005 Type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s July 26 Chip beads For general signal line MM series (for automobiles) MM5 Type MM5 5[42 inch]* * Dimensions code JIS[EIA] (2/) eminders for using these products Before using
SPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein
Version: 1.2 Document code:ma2512 Effective date : Page: 1 of 7. Metal Alloy shunt resistor MA2512 series ROHS
Document code: Page: 1 of 7 Metal Alloy shunt resistor series ROHS Metal Alloy Shunt Resistor Specification Document code: Page: 2 of 7 Metal Alloy shunt resistor series ROHS Scope This specification applies
DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5%
Product specification July 10, 2017 V.7 DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0201/0402/0603/0805/06/ 10/18/2010/25 RoHS compliant & Halogen free AC SERIES
Vectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
Thick Film Chip Resistors / Low Resistance Type
Thick ilm Chip esistors / Low esistance Type Thick ilm Chip esistors / Low esistance Type Type: E LW, 3LW, 6LW BW, 3BW, 6BW, BW, 6CW, CW E B, 3B, 6D, 6B, B, B, 3, 6,,,, Z, T E L03, L06, L0, L, L, LD, LW
0402ESDA-MLP ESD suppressor
ESD suppressor Supersedes September 2010 Pb HALOGEN HF FREE Applications ESD port protection for mobile/smart phones Game console ESD port protection High speed ESD data port protection Set-top-boxes Tablets,
Features. General Description. Applications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features General Description Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small
SPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
VFH230C Series XO Low Jitter 3.3V 5x7mm SMD, LVPECL / LVDS
5x7mm SMD, LV / Features 750kHz to 800MHz frequency range
Chip Beads(SMD) For Signal Line
(1/8) Chip Beads(SMD) For Signal Line Conformity to ohs Directive MM Series MM168 Type FEATUES Chip bead(impeder), MM series offers 7 construction materials. Size standardized for use by automatic assembly
Wire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRMA) Multilayer Ferrite Beads Chip Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
Vectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
RF Inductor Series. Token Electronics Industry Co., Ltd. Version: February 24, Web:
Version: February 24, 2017 RF Inductor Series Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City, Taiwan,
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. *RoHS COMPLIANT VERSIONS AVAILABLE Features Lead free version available (see
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
Reference Only. SpecNo.JELF243B-9110C-01 P.1 / 11. CHIP COIL (CHIP INDUCTORS) LQG15HZ 02D Murata Standard Reference Specification [AEC-Q200]
![Reference Only. SpecNo.JELF243B-9110C-01 P.1 / 11. CHIP COIL (CHIP INDUCTORS) LQG15HZ 02D Murata Standard Reference Specification [AEC-Q200]](/thumbs/80/82302849.jpg "Reference Only. SpecNo.JELF243B-9110C-01 P.1 / 11. CHIP COIL (CHIP INDUCTORS) LQG15HZ 02D Murata Standard Reference Specification [AEC-Q200]")
SpecNo.JELF243B-9110C-01 P.1 / 11 1.Scope CHIP COIL (CHIP INDUCTORS) LQG15HZ 02D Murata Standard Reference Specification [AEC-Q200] This reference specification applies to Chip coil (Chip Inductors) LQG15HZ
DATA SHEET CURRENT SENSOR - LOW TCR HIGH POWER PT-High power series 5%, 2%, 1% sizes 0402/0603/0805/1206/0815/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR HIGH POWER PT-High power series 5%, 2%, 1% sizes 0402/0603/005/1206/015/2010/2512 RoHS compliant & Halogen free Product specification Product specification 2 PT-High
DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5%
Product specification May 25, 2015 V.4 DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0201/0402/0603/0805/1206/ 12/1218/20/2512 RoHS compliant & Halogen free Product
July Chip Beads. For power line. MPZ series. * Dimensions Code JIS[EIA]
![July Chip Beads. For power line. MPZ series. * Dimensions Code JIS[EIA]](/thumbs/83/88175764.jpg "July Chip Beads. For power line. MPZ series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 23 Chip Beads For power line MP series MP63 MP5 MP68 MP22 63[2 inch]* 5[42 inch] 68[63 inch] 22[85 inch] * Dimensions Code JIS[EIA] (2/23) EMINDES FO USING THESE PODUCTS
Vectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
Thin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
October Chip beads. For power line. MPZ series. MPZ1608 Type. * Dimensions code JIS[EIA]
![October Chip beads. For power line. MPZ series. MPZ1608 Type. * Dimensions code JIS[EIA]](/thumbs/72/67434359.jpg "October Chip beads. For power line. MPZ series. MPZ1608 Type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s October 26 Chip beads For power line MP series MP68 Type MP68 68[63 inch]* * Dimensions code JIS[EIA] (2/) eminders for using these products Before using these products, be sure
Surface Mounted Power Resistor Thick Film Technology
Surface Mounted Power Resistor Thick Film Technology DIMENSIONS in millimeters FEATURES AEC-Q200 qualified 25 W at 25 C case temperature Surface mounted resistor - TO-252 (DPAK) style package Wide resistance
Most Reliable Component for Microwave. Data sheet Rev. 00 AM4311R38A0. Analog MEMS Microphone (Rear/ Bottom type)
Rev. 00 Most Reliable Component for Microwave AM4311R38A0 (Rear/ Bottom type) ` 3 Contents Page 1. Specification Revisions 2. Description and Application 3. Marking Numbering Standards 4. Part Numbering
July Chip beads. For general signal line. MMZ series. MMZ1608 Type. * Dimensions code JIS[EIA]
![July Chip beads. For general signal line. MMZ series. MMZ1608 Type. * Dimensions code JIS[EIA]](/thumbs/80/80944178.jpg "July Chip beads. For general signal line. MMZ series. MMZ1608 Type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s July 26 Chip beads For general signal line MM series MM68 Type MM68 68[63 inch]* * Dimensions code JIS[EIA] (2/4) eminders for using these products Before using these products,
DATA SHEET HIGH OHMIC CHIP RESISTORS RC high ohmic series 20%, 10%, 5% sizes 0805/1206. RoHS compliant
DATA SHEET HIGH OHMIC CHIP RESISTORS RC high ohmic series 20%, 10%, 5% sizes 005/1206 RoHS compliant Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification