SPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern

Transcription

1 SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: Fax: info@swissdis.ch SPECIFICATIONS Metal Film Precision Resistor CSRV-Serie Version August 2017

2 Features -AEC-Q200 Compliance -Thin film technology -Excellent overall stability -Sn termination on Ni barrier layer -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts -SMD enabled structure -Lead-free and RoHS compliant Applications -Automotive -Industrial -Telecommunication -Medical Equipment -Measurement/Testing Equipment TECHNICAL SPECIFICATIONS DESCRIPTION CSRV0102 CSRV0204 CSRV0207 Resistance range 8.2Ω-1MΩ; 0Ω 0.1Ω-3.4MΩ; 0Ω 0.1Ω-3.4MΩ; 0Ω Resistance tolerance ±5%;±1%;±0.5%;±0.25%;±0.1% Temperature coefficient ±ppm/ ; ±50ppm/ ; ±25ppm/ ; ±15ppm/ ±ppm/ ; ±50ppm/ ; ±25ppm/ ; ±15ppm/ ; ±10ppm/ Operation mode Standard High power Standard High power Standard High power Power rating P70 1/8W 1/5W 0.3W 1/4W 2/5W 1/2W 1W Operating voltage Umax. 150V 200V 200V 200V 200V 300V 350V Operating temperature range -55 ~155 Max. resistance change at P70 for resistance range, ΔR/R max., after 0 h 0.5% 0.5% 0.5% Construction & Dimension D Type L ΦD K Weight 1,000EA (g) K L CSRV ± ± ± CSRV ± ± ± CSRV ± ± ± Insulation Coating Electrode Cap Trimming Line Resistor Layer Ceramic Rod Marking 1 Revision: 04-Aug-2017

3 Part Numbering Part Number:CSRV0204DTDV1 Part Number:CSRV0204JT-VR0R0 C S R V D T D V C S R V J T - V R 0 R 0 Product Type Dimensions (L ΦD) Resistance Tolerance Packaging Code TCR (PPM/ C) Power Rating Resistance CSRV 0102: 2.2x : 3.5x : 5.9x2.2 B: ±0.1% C: ±0.25% D: ±0.5% F: ±1% J: ±5% T: Taping Reel B: ±10 N: ±15 C: ±25 D: ±50 E: ± -: Jumper T: 1W U: 1/2W V: 1/4W G: 2/5W P: 1/5W W: 1/8W L: 0.3W 0010: 1Ω 0: 10Ω 2201: 2200Ω 1: 1KΩ 4: 1MΩ R050: 0.05Ω 22R1: 22.1Ω R0R0: 0Ω Recommend Land Pattern Derating Curve B A C Power ratio(%) Type A B C CSRV CSRV CSRV Ambient Temperature( ) Soldering Condition IR Reflow Soldering Wave Soldering (Flow Soldering) (1) Time of IR reflow soldering at maximum temperature point 260 C:10s (2) Time of wave soldering at maximum temperature point 260 C:10s (3) Time of soldering iron at maximum temperature point 410 C:5s 2 Revision: 04-Aug-2017

4 Standard Electrical Specifications Type Item 0102 Power Rating at 70 C Operating Temp. Range 1/8W -55 ~ +155 C Max. Operating Voltage 150V Max. Overload Voltage 300V Resistance Range ±0.1% ±0.25% ±0.5% ±1% ±5% Ω-82KΩ TCR (PPM/ C) Ω-56KΩ - ± Ω- 200KΩ 49.9Ω- 390KΩ - ±25-8.2Ω-1MΩ ±50-40Ω-1MΩ ± Jumper:2A 0Ω(<15mΩ) Ω-20KΩ ±10 10Ω-300KΩ ± /4W -55 ~ +155 C 200V 400V 10Ω-1MΩ 10Ω-3.4MΩ 4.02Ω-3.4MΩ ±25 10Ω-1MΩ 1Ω-1MΩ 1Ω-3.4MΩ 0.2Ω-3.4MΩ ±50-0.1Ω-1MΩ ± Jumper:2A 0Ω(<15mΩ) Ω-20KΩ ±10 10Ω-300KΩ ± /2W -55 ~ +155 C 300V 600V 10Ω-1MΩ 10Ω-3.4MΩ 4.02Ω-3.4MΩ ±25 10Ω-1MΩ 1Ω-1MΩ 1Ω-3.4MΩ 0.2Ω-3.4MΩ ±50-0.1Ω-1MΩ ± Jumper:4A 0Ω(<15mΩ) - High Power Rating Electrical Specifications Type Item Power Rating at 70 C Operating Temp. Range Max. Operating Voltage Max. Overload Voltage Resistance Range ±0.1% ±0.25% ±0.5% ±1% ±5% TCR (PPM/ C) /5W 0.3W -55 ~ +155 C 200V 400V - Ω-82KΩ Ω-56KΩ - ± Ω- 200KΩ 49.9Ω- 390KΩ - ±25-8.2Ω-1MΩ ±50-40Ω-1MΩ ± 10Ω-300KΩ ± /5W -55 ~ +155 C 200V 400V 10Ω-1MΩ 10Ω-3.4MΩ 4.02Ω-3.4MΩ ±25 10Ω-1MΩ 1Ω - 1MΩ 1Ω 3.4MΩ 0.2Ω-3.4MΩ ±50-0.1Ω-1MΩ ± 10Ω-300KΩ ± W -55 ~ +155 C 350V 700V 10Ω-1MΩ 10Ω-3.4MΩ 4.02Ω-3.4MΩ ±25 10Ω-1MΩ 1Ω-1MΩ 1Ω-3.4MΩ 0.2Ω-3.4MΩ ±50-0.1Ω-1MΩ ± Operating Voltage= (P*RFehler! Textmarke nicht definiert.) or Max. Operating Voltage listed above, whichever is lower. Overload Voltage=2.5* (P*R) or Max. Overload Voltage listed above, whichever is lower. RCWV(Rated Continuous Working Voltage)= (P*RFehler! Textmarke nicht definiert.) or Max. Operating Voltage whichever is lower. Viking is capable of manufacturing the optional spec based on customer s requirement. 3 Revision: 04-Aug-2017

5 Environmental Characteristics Temperature Coefficient of Resistance (T.C.R.) Short Time Overload Insulation Resistance Endurance Biased Humidity High Temperature Exposure Item Requirement Test Method As Spec 10Ω-270KΩ: ±(0.1%+0.05Ω) <10Ω & >270KΩ: ±(0.15%+0.05Ω) 0102: ±(0.15%+0.05Ω) 10G 10Ω-270KΩ: ±(0.25%+0.05Ω) <10Ω & >270KΩ: ±(0.5%+0.05Ω) 0102: ±(0.5%+0.05Ω) 10Ω-270KΩ: ±(0.5%+0.05Ω) <10Ω & >270KΩ: ±(1%+0.05Ω) 0102: ±(2%+0.05Ω) 10Ω-270KΩ: ±(0.25%+0.05Ω) <10Ω & >270KΩ: ±(1%+0.05Ω) 0102: ±(1%+0.05Ω) JIS-C IEC C~+125 C, 25 C is the reference temperature JIS-C IEC RCWV*2.5 or Max. Overload Voltage whichever is lower for 5 seconds JIS-C IEC Max. Overload Voltage for 1 minute JIS-C IEC MIL-STD-202 Method ±2 C, RCWV for 0 hrs with 1.5 hrs ON and 0.5 hr OFF MIL-STD-202 Method hrs 85 C/85%RH 10% of operating power. MIL-STD-202 Method 108 at +155 C for 0 hrs Board Flex Solderability Resistance to Soldering Heat Voltage Proof Leaching 10Ω-270KΩ: ±(0.1%+0.05Ω) <10Ω & >270KΩ: ±(0.5%+0.05Ω) 0102: ±(0.5%+0.05Ω) 95% min. coverage 10Ω-270KΩ: ±(0.1%+0.05Ω) <10Ω & >270KΩ: ±(0.25%+0.05Ω) 0102: ±(0.25%+0.05Ω) No breakdown or flashover Individual leaching area 5% Total leaching area 10% AEC-Q Bending once for 60 seconds with 2mm JIS-C IEC J-STD ±5 C for 3 seconds MIL-STD-202 Method ±5 C for 10 seconds JIS-C IEC times Max. Operating Voltage for 1 minute JIS-C IEC ±5 C for 30 seconds Temperature Cycling Mechanical Shock Vibration ESD Resistance to Solvents Terminal Strength Flammability 10Ω-270KΩ: ±(0.25%+0.05Ω) <10Ω & >270KΩ: ±(0.5%+0.05Ω) 0102: ±(1%+0.05Ω) ±(0.25%+0.05Ω) ±(0.5%+0.05Ω) ±(0.5%+0.05Ω) No visible damage on appearance and marking. No broken No ignition of the tissue paper or scorching or the pinewood board JESD22 Method JA C to +125 C, 0 cycles MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is g s. Normal duration (D) is 6. MIL-STD-202 Method g s for 20 min., 12 cycles each of 3 orientations, Hz AEC-Q Human body, 2KV MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. AEC-Q Force of 1.8kg for 60 seconds. UL-94 V-0 or V-1 are acceptable. Electrical test not required. RCWV(Rated Continuous Working Voltage)= (P*RFehler! Textmarke nicht definiert.) or Max. Operating Voltage whichever is lower. Storage Temperature: 15~28 C; Humidity < 80%RH 4 Revision: 04-Aug-2017

6 Packaging Packaging Quantity & Reel Specifications Type Reel Diameter ΦA ΦB ΦC W T Emboss Plastic Tape (EA) CSRV inch 178.5± ± ± ±0.5 3,000 CSRV inch 178.5± ± ± ±0.5 3,000 CSRV inch 178.5± ± ± ±0.5 2,000 Emboss Plastic Tape Specifications Top Tape ψ D0 A E B F W T Emboss Tape Resistor P1 P2 P0 direction of unreeling ψ D1 1.4Min. 0.9 Min (CSRV0102) 0.9 Min (CSRV0204) 1.4 Min (CSRV0207) Type A B W E F P0 P1 P2 ΦD0 T CSRV ± ± ± ± ± ± ± ± ±0.10 CSRV ± ± ± ± ± ± ± ± ±0.10 CSRV ± ± ± ± ± ± ± ± ±0.10 Fordetail questions, contact:sales@viking.com.tw 5 Revision: 04-Aug-2017

7 Pulse withstanding capacity The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown. CSRV CSRV0207 CSRV0204 CSRV0102 Series Single Pulse 0 Pulse Power (W) Pulse Duration Time(sec.) 6 Revision: 04-Aug-2017

8 Continuous Pulse The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70 C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. CSRV CSRV0207 CSRV0204 CSRV CSRV0207 CSRV Revision: 04-Aug-2017

9 CSRV0102 Series Continuous Pulse 0 Pulse Power (W) Pulse Duration Time(sec.) CSRV0102 Series Pulse Voltage( Ohm) 0 Pulse Voltage (V) Duration Time (sec.) 8 Revision: 04-Aug-2017

10 Frequency behavior Resistors are designed to function according to ohmic laws. This is basically true of resistors for frequencies up to khz. At higher frequencies, there is an additional contribution to the impedance by an ideal resistor switched in series with a coil and both switched parallel to a capacitor. The values of the capacitance and inductance are mainly determined by the dimensions of the terminations and the conductive path length. The environment surrounding components has a large influence on the behavior of the component on the printed-circuit board. 200 Frequency vs. Impedance CSRV Series(CSR0204) (CSRV0204) [Zo]-Ro/Ro in % R 10R R 1K 10K K 1M Frequency (MHz) Frequency vs. Phase Angle CSRV Series(CSR0204) (CSRV0204) Phase Angle (Degree) Frequency (MHz) 1R 10R R 1K 10K K 1M 9 Revision: 04-Aug-2017

11 Frequency vs. Impedance CSRV Series(CSR0207) (CSRV0207) 200 [Zo]-Ro/Ro in % R 10R R 1K 10K K 1M Frequency (MHz) Frequency vs. Phase Angle CSRV Series(CSR0207) (CSRV0207) Phase Angle (Degree) Frequency (MHz) 1R 10R R 1K 10K K 1M 10 Revision: 04-Aug-2017

12 Lightning Surge Resistors are tested in accordance with IEC using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value. 1.2/50μs Lightning Surge 00 Pulse Voltage (V) 0 CSRV0204 CSR0204 CSRV0207 CSR Resistance (Ω) 10/700μs Lightning Surge 00 Pulse Voltage (V) 0 CSRV0204 CSR0204 CSRV0207 CSR Resistance (Ω) 11 Revision: 04-Aug-2017

13 1.2/50μs Lightning Surge 00 CSRV0102 Pulse Voltage (V) Resistance (Ω) 10/700μs Lightning Surge 00 CSRV0102 Pulse Voltage (V) Resistance (Ω) 12 Revision: 04-Aug-2017

14 Marking & Resistance Tolerance ±5% E ±1% E-96 ±0.5% E-192 ±0.25% ±0.1% Color Digit Multiplier Silver Gold Black Brown Red Orange Yellow Green Blue Violet Grey White Resistance more than two significant figures(<1r) or more than three significant figures(>1r) will not provide color code. 13 Revision: 04-Aug-2017

15 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION - Max overload voltage updated Version A4 Feb 25, Increase the color code Description - Environmental Characteristics updated Version A5 Apr 30, Dimension K updated Version A6 Jun 05, Electrical Specifications updated - Size CSRV0102 specifications added Version A7 Jul 15, Modify Storage Temperature Version A8 Mar 06, Electrical Specifications updated Version A9 Jun 01, Electrical Specifications updated Version B Aug 04, Electrical Specifications updated 14 Revision: 04-Aug-2017