GEN2 T-A Drill Inserts
|
|
|
- Annabella Hawkins
- 5 years ago
- Views:
Transcription
1 5/6 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 5 Series HSS iameter Range: 62.38mm mm ( ) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS mm inch Fractional quivalent T 1 mm M200 TiN /2 455H T H T /32 455H T /16 455H T /32 455H T H T /8 455H T /32 455H T H T /16 455H T /32 455H T /4 455H T H T /32 455H T /16 455H T H T /32 455H T /8 455H T /32 455H T H T /16 455H T /32 455H T H T H T-0300 THRING SPILS 30: : : 4-6 HI, HR, R, SK, R, I, N, W oatings not listed above can be supplied as non-stocked standards. Inserts sold in quantities of 1 TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- 30: (0) enquiries.eu@alliedmachine.com
2 RILLING T- Replaceable Insert rilling System 5/6 T- Original rill Inserts 5 Series HSS iameter Range: 62.38mm mm ( ) T RILLING HSS Inserts - Super obalt HSS Insert Super obalt * HSS mm inch Fractional quivalent T 1 mm TiN TiN /2 155T T T T /32 155T T /16 155T T /32 155T T T T /8 155T T /32 155T T T T /16 155T T /32 155T T /4 155T T T T /32 155T T /16 155T T T T /32 155T T /8 155T T /32 155T T T T /16 155T T /32 155T T T T T T-0300 *vailable as non-stocked standard THRING 30: : : 4-6 HI, HR, R, SK, R, I, N, W oatings not listed above can be supplied as non-stocked standards. Inserts sold in quantities of 1 TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- SPILS (0) enquiries.eu@alliedmachine.com 30: 95
3 5/6 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 6 Series HSS iameter Range: 76.22mm mm ( ) (for use with 5 series holders) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS mm inch Fractional quivalent T 1 mm M200 TiN /32 456H T /16 456H T H T /32 456H T /8 456H T H T /32 456H T /16 456H T /32 456H T H T /4 456H T /32 456H T H T /16 456H T /32 456H T /8 456H T H T /32 456H T /16 456H T H T /32 456H T /2 456H T-0316 THRING SPILS 30: : : 4-6 HI, HR, R, SK, R, N, W oatings not listed above can be supplied as non-stocked standards. Inserts sold in quantities of 1 TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- 30: (0) enquiries.eu@alliedmachine.com
4 RILLING T- Replaceable Insert rilling System 5/6 T- Original rill Inserts 6 Series HSS iameter Range: 76.22mm mm ( ) (for use with 5 series holders) T RILLING HSS Inserts - Super obalt HSS Insert Super obalt * HSS mm inch Fractional quivalent T 1 mm TiN TiN /32 156T T /16 156T T T T /32 156T T /8 156T T T T /32 156T T /16 156T T /32 156T T T T /4 156T T /32 156T T T T /16 156T T /32 156T T /8 156T T T T /32 156T T /16 156T T T T /32 156T T /2 156T T-0316 *vailable as non-stocked standard THRING 30: : : 4-6 HI, HR, R, SK, R, N, W oatings not listed above can be supplied as non-stocked standards. Inserts sold in quantities of 1 TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- SPILS (0) enquiries.eu@alliedmachine.com 30: 97
5 5/6 RILLING T- Replaceable Insert rilling System T- rill Insert Holders 5 Series Flanged Shank L 7 RILLING 2 P 1 Straight Flute ody Shank Length 2 L 7 P 1 Short /2* 22050S-50FM xtended /2* 25050S-50FM Short 2-1/2-3-1/2 6-49/64 8-1/2 8-3/4 13-1/ /2 1/ S-200F xtended 2-1/2-3-1/ / /4 24-3/ /2 1/ S-200F *Metric thread to SP and ISO 7-1 L 7 2 P 1 Helical Flute ody Shank Length 2 L 7 P 1 Standard /2* 24050H-50FM Standard 2-1/2-3-1/2 10-3/4 12-1/2 12-3/4 17-1/ /2 1/ H-200F *Metric thread to SP and ISO 7-1 THRING onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7619-IP IP N-cm (155.0 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength SPILS 30: = Metric (mm) = Imperial (in) Screws sold in quantities of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. 30: (0) enquiries.eu@alliedmachine.com
6 T- rill Insert Holders 5 Series Taper Shank RILLING T- Replaceable Insert rilling System 5/6 MT P 2 R RILLING Straight Flute ody Shank Length MT P 2 R Short #5** 1/2* 2T-6SRM 22050S-005M xtended #5** 1/2* 2T-6SRM 25050S-005M L #5** 1/2* 2T-6SRM 27050S-005M 3L #5** 1/2* 2T-6SRM 29050S-005M Short 2-1/2-3-1/2 6-3/4 8-1/2 11-5/ /16 #5 1/2 2T-6SR 22050S-005I Standard 2-1/2-3-1/2 10-3/4 12-1/2 15-5/ /16 #5 1/2 2T-6SR 24050S-005I xtended 2-1/2-3-1/2 18-1/ / /16 #5 1/2 2T-6SR 25050S-005I -1/2-3-1/ /4 30-9/ /16 #5 1/2 2T-6SR 27050S-005I 3-1/2-3-1/ /4 39-9/ /16 #5 1/2 2T-6SR 29050S-005I *Metric thread to SP and ISO 7-1 **Per ISO 296 type K P 2 MT R Helical Flute ody Shank Length MT P 2 R Standard #5** 1/2* 2T-6SRM 24050H-005M *Metric thread to SP and ISO 7-1 **Per ISO 296 type K onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7619-IP IP N-cm (155.0 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength THRING 30: : 101 & 110 = Metric (mm) = Imperial (in) Screws sold in quantities of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. SPILS (0) enquiries.eu@alliedmachine.com 30: 99
7 5/6 RILLING T- Replaceable Insert rilling System T- rill Insert Holders 5 Series Straight Shank RILLING 2 L 7 P 1 Straight Flute ody Shank Length 2 L 7 P 1 Short 2-1/2-3-1/2 6-3/4 8-1/2 8-3/4 12-1/ / S-200L Standard 2-1/2-3-1/2 10-3/4 12-1/2 12-3/4 16-1/ / S-200L xtended 2-1/2-3-1/2 18-1/ / / S-200L -1/2-3-1/ / / / S-200L 3-1/2-3-1/ / / / S-200L THRING onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7619-IP IP N-cm (155.0 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength SPILS 30: = Metric (mm) = Imperial (in) Screws sold in quantities of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. 30: (0) enquiries.eu@alliedmachine.com
8 RILLING T- Replaceable Insert rilling System 5/6 T- rill ccessories 5/6 Series Rotary oolant dapters Torx Plus Screws Rotary oolant dapter (R) and ccessories I O riving Rod Thread P 1 Kit ** R O-Rings Replacements M12 x /2* 2T-6SRM 2T1-6SR 2T1-6OR-10 P 1 I O RILLING 2-1/4 3-3/4 1-3/4 1/2-13 1/2 2T-6SR 2T1-6SR 2T1-6OR-10 *Thread to SP and ISO 7-1 **R Repair Kit includes (2) O-rings, (2) snap rings, and (2) thrust washers Refer to page 30: 110 for proper R assembly and safety information Thread onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7619-IP IP N-cm (155.0 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength THRING 30: : = Metric (mm) = Imperial (in) Inserts sold separately Screws sold in packs of 10 O-rings sold in packs of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. SPILS (0) enquiries.eu@alliedmachine.com 30: 101
GEN2 T-A Drill Inserts
7/8 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 7 Series HSS iameter Range: 89.10mm - 101.60mm (3.508-4.000 ) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS RMING
T-A Original Drill Inserts
RILLING T- Replaceable Insert rilling System T- Original rill Inserts Series HSS iameter Range: 11.10mm - 12.95mm (0.437-0.510 ) 132 RILLING HSS Inserts - Premium obalt Insert mm inch quivalent mm TiN
Boring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials
oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -
Drilling. Boring. Reaming. Threading. EcoCut MULTIFUNCTION TOOLING. Specials
rilling oring Reaming Threading cout MULTIFUNTION TOOLING Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622 United States 485
Boring. Reaming. Burnishing. Threading. Revolution Drill DRILLING. Indexable Insert Drilling System. Specials
oring Reaming urnishing Threading Revolution rill Indexable Insert rilling System Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH
Making a difference. Structural Steel.
EN Making a difference Structural Steel www.alliedmaxcut.com Allied Maxcut (AMEC ) is the European Headquarters of Allied Machine & Engineering Corporation USA, a global leader in innovative high performance
Extracts without expanding material Ideal for pipes and fittings Works on left-hand or right-hand threads
Serious Solutions for Stuck Fasteners IRWIN Tools has the solution to deal with a stuck fastener, a rounded or broken head, a snapped stud, or a stripped screw or fitting. Five different styles of extractors
Boring. Reaming. Burnishing. Threading. Opening Drill DRILLING. Indexable Insert Drilling System. Specials
oring Reaming urnishing Threading Opening rill Indexable Insert rilling System Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622
DRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
Thread Milling THREADING. Solid Carbide and Insert Style Thread Mills. AccuThread 856 AccuThread T3 ThreadMills. Drilling. Boring. Reaming.
rilling oring Reaming urnishing Thread Milling Solid arbide and Insert Style Thread Mills Specials ccuthread 856 ccuthread T3 ThreadMills US North merica urope sia llied Machine llied Machine llied Machine
KEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
Fasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
INSTALLING T400 LOAD SENSORS
INSTALLING T400 LOAD SENSORS The above illustrations represent the proper arrangement of Model T400 Load Sensor kit parts using either the Drill and Tap method or the Weld method. A proper installation
Ready To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
Metal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point
Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split
The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
w w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models
-J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
CADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
Radiator Valves. Product Information. It s all at Albion
Radiator Valves Product Information It s all at lbion RT 97 Thermostatic ead Lockable ead Liquid Sensor Frost Setting 6 onforms to EN2 M30 x. Standard onnection Flow nd P 0 S - K 0. 0. 0 00 2000 3000 4000
Aircraft Quality Reamers and Special Tooling
C A T A L O G 2 6 www.reamers.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 AIRCRAFT QUALITY REAMERS AND SPECIAL TOOLING P R O V E N P R E C I S I O N Since 1881,
Taper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the Martin bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
Facing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
Drilling. Boring. Reaming. Burnishing. Specials. Special Tooling Solutions. Threading. Now Featuring
rilling oring Reaming urnishing Specials Special Tooling Solutions Threading Now Featuring Special Tooling Solutions Superion Insta-Quote ngineered Specials Speciality is Our Speciality It s true. When
Mechanical Systems & Tools Syllabus [Detailed]
![Mechanical Systems & Tools Syllabus [Detailed]](/thumbs/89/101179107.jpg "Mechanical Systems & Tools Syllabus [Detailed]")
TECHNICAL TRAINING - SWAPPING DOWNTIME FOR PRODUCTIVITY! Mechanical Systems & Tools Syllabus [Detailed] Your automation.ie Fact Sheets! Understand Mechanical Energy Types! 1 Staying Safe in the Mechanical
Drilling. Boring. Reaming. Burnishing. AccuThread T3 THREADING. Solid Carbide Thread Mills. Specials
rilling oring Reaming urnishing ccuthread T3 Solid arbide Thread Mills Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622 United
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
RBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
Snappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
TAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
Cutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
Installation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
CM6200 MILLING MACHINE
CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,
RTI TECHNOLOGIES, INC.
RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally
Thread Repair & Thread Protection
Thread Repair & Thread Protection Screw Thread Inserts, Kits & Components for Industrial Maintenance, Repair and Overhaul Bulletin 998 C E R T I F I E D ISO 9001 AS 9100 TS 16949 ISO 14001 The HELI-COIL
Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
INSTALLATION INSTRUCTIONS
Sheet 1 of 5 General: Upon receipt of fixture thoroughly inspect for any freight damage, which should be brought to the attention of the delivery carrier. Compare the catalog description listed on the
Check the delivery for completeness and for any external damage. Contact your retailer if the delivery is incomplete or you find any damage.
SUNNY CENTRAL CP and HE-20 Additional sheet 1 Validity The sealing kit serves as verification as to whether the inverter has been subject to unauthorized opening and as protection against manipulation.
Calf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
Peco Fasteners 3/8 Internal Plug Drop In 50 Per Jar 3/8-16 SMART DROP IN ANCHOR ZINC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category 6337J 3/8-6 Smart Drop In Zinc Peco Fasteners,
Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
Drilling. Boring. Reaming. Threading. Roller Burnishing BURNISHING. Finishing Solutions by S.C.A.M.I. Specials
rilling oring Reaming Threading Roller urnishing Finishing Solutions by S...M.I. Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH
Drilling. Boring. Reaming. Burnishing. Special Tooling Solutions SPECIALS. Threading. Now Featuring
rilling oring Reaming urnishing Special Tooling Solutions SPILS Threading Now Featuring North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622
Swivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
MACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
STR TOO SUPPY / RN TOO SUPPY TOO POST TURRTS SRIS 00: Tel: 01-18-81 / Fax: 01-9-7 0 Huyler St / So. Hackensack, NJ 070 US TISTOK TURRTS SRIS 00: SOI TH NTRS SRIS 1: Hardened and ground to closest tolerances.
Drilling. Boring. Reaming. Burnishing. Special Tooling Solutions SPECIALS. Threading. Now Featuring
rilling oring Reaming urnishing Special Tooling Solutions Threading Now Featuring The Foundation Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions to the
Twist Drills for Woodworkers. Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm
Twist Drills for Woodworkers Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm Twist Drills for Woodworking Topics that will be covered: Coatings Steel Types Drill Points Drill
Drilling. Reaming. Burnishing. Threading. Boring WOHLHAUPTER. High Precision Boring Systems. Specials
rilling Reaming urnishing Threading oring WOHLHUPTR High Precision oring Systems Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH
Part No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
Ball Screw Product Guide
Ball Screw Product Guide Contents Ball Screw Systems... 3 Performance Specifications... 4 Dimensional Specifications... 5 Standard End Journals... 6 Accessory Items... 6 Metric Ball Screws and Ball Nuts...
Polaris General 1000 EPS 2016
Contact Us: FACTORY UTV LLC. 9237 Beatty Drive Sacramento, CA 95826 Phone : (916) 383-2730 E-mail : info@factoryutv.net Go online: www.factoryutv.net U.H.M.W. Skid Plate / Under Armor Package Ultra. High.
55000/55010 Installation Instructions
A. Install 55015 B. Bolt roof rails, 55020/55025, to front hoop. C. Assemble 55026 D. To install without drilling into bumper. E. If mounting directly to bumper. A. 55015 Installation Instructions 55000/55010
w w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
Metal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
ROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
CHAMFERING RINGS UPDATED. Ring Diameters: 1.34, 1.50, 1.65 and Fits Body Diameters: 10.0mm(.3937") mm(1.000")
Ring Diameters: 1.34, 1.50, 1.65 and 1.85 Fits Body Diameters: 10.0mm(.3937") - 25.4mm(1.000") L:D Ratios: Gold Twist 3xD, 5xD, 8xD & 12xD Quad Twist & Quad Drill+ 3xD, 4xD & 5xD Maximum Chamfer DOC:.118"
Drilling. Boring. Reaming. Threading. Burnishing. S.C.A.M.I. Roller Burnishing Systems. Specials
rilling oring Reaming Threading urnishing S...M.I. Roller urnishing Systems Specials Roller urnishing Systems Through Hole Style lind Hole Style Get the Finish You Need llied Machine is proud to offer
Honda. Pioneer 1000 & U.H.M.W. Skid Plate / Under Armor package. Installation guide
Contact Us: FACTORY UTV LLC. 9237 Beatty Drive Sacramento, CA 95826 Phone : (96) 383-2730 E-mail : info@factoryutv.net Go online: www.factoryutv.net U.H.M.W. Skid Plate / Under Armor package Ultra. High.
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
K.D. LOCKER ASSEMBLY INSTRUCTIONS
K.D. Locker Assembly Instructions PN 0860 K.D. LOCKER Updated /05 ASSEMBLY INSTRUCTIONS These Instructions Cover 3 Types of Lockers: VANGUARD, GUARDIAN AND INVINCIBLE II Contents General Instructions 1
Air Cooled Engine Technology. Roth 9 th Ch 3 Fasteners & Sealing Pages 45 65
Roth 9 th Ch 3 Fasteners & Sealing Pages 45 65 1. Engine & equipment can be common or can be designed to perform specific functions. Fasteners Options Features 2. The of a fastener is actually an inclined
MacroJunior & MacroCombi
MacroJunior & MacroCombi gives extreme flexibility one chuck, two systems reduces setting-up times. ensures precision and quality is suitable for automatic changing with System 3R s automation program.
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table
CoroChuck 970 SynchroFlex Benefits
Benefits Better surface quality on the flanks of the cut threads Longer tool life due to less friction Greater process security Due to the reduced risk of breaking the tap especially with small dimensions
Ensat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
User Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves
Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves NOTE: These instructions apply only to 60 series ball valves with bodies containing external mounting nibs. External
B3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
Assembly and installation help
Assembly and installation help A supplement to the directions The Purpose of this tutorial is to expand (not replace) upon the directions that come with the system and to help provide shortcuts, the first
Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
STYLE CY/SFCY STYLE TA/SFTA
STYLE CY/SFCY 2 STYLE TA/SFTA 2 6. Tool Size Ø Shank Ø Neck Ø Neck Length Total Length Use with Insert Insert Ordering No. 2 Insert Style Screw Torx Key TAV 0250-3.75-0500 1/4 1/2.225 1 1/4 3 3/4 MS 06N
Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
S T U D S & Revised 406
C O N C E A L E D - H E A D S E L F - C L I N C H I N G S T U D S & S TA N D O F F S Revised 406 PEM CONCEALED-HEAD STUDS* AND STANDOFFS These studs and standoffs ensure permanent mounting in metal sheets
Value-Added Programs. Refurbishment Service. Refurbishment Delivery Service. Just In Time Inventory Programs. Commodity Management
Value-Added Programs ClappDiCO offers a number of value-added programs that reduces our customers manufacturing costs on a per unit basis. Refurbishment Service A complete refurbishment service to restore
Danly Die Sets CATALOG DIE SETS. Quality & performance Quick delivery Precision Components
Danly Sets TM CATALOG DIE SETS Quality & performance Quick delivery Precision Components 1 TM Danly Sets www.anchordanly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On Danly Sets
PARTITION INSTALLATION INSTRUCTIONS
PARTITION INSTALLATION INSTRUCTIONS 2015 Chevrolet Tahoe PPV / Part Number 5703FW, FWA & FEW Do not attempt to install this product on any vehicle equipped with third row seating! Parts List Distributed
The new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
SC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
FRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
Umbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
Page 1. SureMotion Quick-Start Guide: LACPACC_QS 1st Edition - Revision A 03/15/16
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LACPACC-002 LACPACC-003 LACP-16TxxLP5 (0.5-in lead screw pitch) LACP-16TxxL1 (1-in lead screw pitch) C P I R K 4 ea Flanged
OPEN-STYLE WOOD WORKBENCH
IN HOUSE ASSEMBLY TEMPLATE WW2-0V, WW2-1V, WW2-2V, WW4-0V, WW4-2V, & WW4-4V SERIES ASSEMBLY INSTRUCTIONS NOTE: 1. MODEL VIEWS MAY NOT REPRESENT EXACT MODEL PURCHASED : EMK 10/27/14 : : UNLESS OTHERWISE
tel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
Product Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691