Drilling. Boring. Reaming. Threading. Burnishing. S.C.A.M.I. Roller Burnishing Systems. Specials

Size: px

Start display at page:

Download "Drilling. Boring. Reaming. Threading. Burnishing. S.C.A.M.I. Roller Burnishing Systems. Specials"

Marianna Bates
5 years ago
Views:

1 rilling oring Reaming Threading urnishing S...M.I. Roller urnishing Systems Specials

Roller urnishing Systems Through Hole Style lind Hole Style Get the Finish You Need llied Machine is proud to offer roller burnishing tools from S...M.I.

With roller burnishing, you can eliminate the need for slower and more costly finishing processes and secondary operations such as grinding, honing, and lapping.

The benefits of this single operation result in the hole quality you should expect from llied Machine.

2 Roller urnishing Systems Through Hole Style lind Hole Style Get the Finish You Need llied Machine is proud to offer roller burnishing tools from S...M.I.. These hole finishing tools provide extremely high-quality surface finish on both through hole and blind hole applications. With roller burnishing, you can eliminate the need for slower and more costly finishing processes and secondary operations such as grinding, honing, and lapping. Not only will the roller burnishing tools create a smooth surface finish, but they will also harden the material and increase the wear resistance of the part. The benefits of this single operation result in the hole quality you should expect from llied Machine. reates fine surface finshes pplicable Industries Increases wear and corrosion resistance erospace griculture utomotive Firearms General Machining liminates other processes and saves you money Oil & Gas Renewable nergy Your safety and the safety of others is very important. This catalogue contains important safety messages. lways read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalogue, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalogue. Safety messages follow these words. WRNING WRNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTI means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOT and IMPORTNT are also used. These are important that you read and follow but are not safety-related. Visit for the most up-to-date information and procedures.

3 Reference Icons The following icons will appear throughout the catalogue to help you navigate between products. Technical Information etailed instructions and information regarding the corresponding part(s) Through Hole Refers to the rolls available for through hole burnishing tools lind Hole Refers to the rolls available for blind hole burnishing tools Recommended utting ata Speed and feed recommendations for optimum and safe burnishing iameter Range Series Metric (mm) Imperial (inch) H I K L F M N O P Q R S T U Roller urnishing Systems ontents Introduction Information Roller urnishing Overview Product Offering Product Selection Guide Product Nomenclature urnishing Series H Series I Series K Series L Series F Series M Series N Series O Series P Series Q Series R Series S Series T Series U Series Technical Information iameter djustment How the urnisher Works Recommended utting ata Metric (mm) Imperial (inch) llied Machine & ngineering offers Roller urnishing tools through an exclusive supply agreement with S...M.I. s.n.c. S...M.I. is an Italian manufacturer that has been producing high quality cutting tools for over 40 years. Visit for additional information about all llied Machine products, or contact our pplication ngineering department for technical assistance. : 1

4 Roller urnishing Overview The Principle of Roller urnishing Roller burnishing is a cold-working process that produces a fine surface finish. The planetary rotation of the hardened rolls creates pressure over a metal surface. Unlike cold rolling, which produces large sectional changes, roller burnishing involves cold-working on the surface of the workpiece to improve the surface structure. ll machined surfaces consist of a series of peaks and valleys, all having irregular height and spacing. The plastic deformation created by roller burnishing is a displacement of the material in the peaks. When under pressure, the material in the peaks flows into the valleys. uring the process, tool marks and irregularities are rolled out, resulting in a mirror-like finish with a tough, work-hardened surface that is also wear and corrosion resistant. urnishing Roll urnishing Pressure ORING RMING URNISHING dvantages of Roller urnishing: Metallurgical Properties Grain structure is condensed and refined. The compacted surface is smoother, harder, and more wear resistant than ground or honed surfaces. The process reduces surface porosity and also removes scratches that could hold reactive substances or contaminants. This increases the corrosion resistance. epending on the material, the surface hardness can be increased by as much as 10 points Rockwell. This may eliminate the need for heat treatment. The plastic deformation induces residual compressive stresses in the surface of the part. This increases the strength properties and fatigue life of the part because any forces on the part must overcome these residual stresses, as well as the tensile strength of the materials, before fatigue conditions occur. dvantages of Roller urnishing: Surface Finish reates a high finish to any machinable metal. Surfaces that are bored, reamed, or turned to 125 micro inches or more can be finished to 4 micro inch L or less in one pass (at feed rates of 125 to 300 mm/min). Roller burnishing replaces grinding, honing, lapping, and other expensive secondary operations. Tool marks are rolled out. Machined Surface urnished Surface The Process The first contact with the machined surface occurs in Section. Plastic deformation occurs in Section as the yield point of the surface is exceeded. Section is the pressurized depth. Once the material endures the maximum compressive strain (Section ), it starts relieving elastically (Section ) through the finishing zone. This leaves a smooth surface and a compressive residual stress of significant peak value. THRING ompressive Residual Stress The stresses formed on the material during the compression decrease toward the centre. These stresses reach approximately 1mm below the surface. This increases the surface hardness. Tensile Residual Stress SPILS : (0) enquiries.eu@alliedmachine.com

5 Roller urnishing Overview When to Roller urnish onditions for Roller urnishing Roller burnishing is a cold working process used to achieve fine hole finishes. In order to achieve the most optimal results, adhere to the benchmarks below: Finishing: The ductility and hardness of the workpiece material along with the surface preparation dictates the quality of the burnished finish. Workability: ny ductile and malleable material up to R40 can be roller burnished. Worked Surface Properties: Workpieces with an interrupted surface within 10% of the circumference can be successfully burnished with a standard tool (see Figures 1 and 2) Figure 1 Figure 2 ORING Tolerance of the urnished Piece: The tolerance range achieved from the burnishing will be equal to that achieved from the pre-machining since no material will be removed. The ideal surface for burnishing consists of a succession of peaks. These peaks correspond on regular feed of the preparation tool (see Figure 3). We suggest the LVN expandable reamer for pre-burnishing because it creates a uniform roughness and a tolerance range of H6 - H7. RMING Figure 3 Pre-machining tapers and surface irregularities caused by cutting tool failure must be noted because these conditions cannot be corrected by the roller burnishing process (see Figures 4 and 5). hipped cutting edge URNISHING Figure 4 Tapered preparation Figure 5 THRING SPILS (0) enquiries.eu@alliedmachine.com : 3

Product Offering Through Hole Style 0.1555" - 6.5313" (3.95mm - 165.90mm) lind Hole Style 0.1850" - 6.5313" (4.70mm - 165.

0005" or better (depending on variables such as material) Produces fine surface finishes between 1-10 microinches Ra Increases surface hardness by 5-10% or more RMING Performs

for slower and costly finishing processes and secondary operations such as grinding, honing, lapping, etc.

6 Product Offering Through Hole Style " " (3.95mm mm) lind Hole Style " " (4.70mm mm) ORING dvantages of the Roller urnishing Tool Provides accurate size control tolerances within " or better (depending on variables such as material) Produces fine surface finishes between 1-10 microinches Ra Increases surface hardness by 5-10% or more RMING Performs a much cleaner operation than honing or other abrasive finishing methods Provides versatility because the operation can be performed on any rotating spindle liminates the need for slower and costly finishing processes and secondary operations such as grinding, honing, lapping, etc. URNISHING age Sleeve Lock Nut THRING one age The Tool omponents ll roller burnishing tools (both through hole and blind hole) are composed of the basic burnisher assembly, including: djustment Housing ssembly Shank (either Straight or Morse Taper) age one Shank (either straight or Morse Taper) SPILS : (0) enquiries.eu@alliedmachine.com

7 Product Selection Guide iameter Range (inch / mm) Length Series Short Standard Long Unlimited H* I K L F ORING M N O P RMING Q R S T U URNISHING *For H series: through hole tools start at " (3.95mm) and blind hole tools start at " (4.70mm) When to ORR UP In some cases, there will be a diameter overlap between a series and the series after it. If the diameter you need falls into this overlap, choose the higher of the two series. xample: You need a 24.64mm diameter tool. This diameter falls into both the K series and the L series. K series diameter range = 16.60mm mm L series diameter range = 24.54mm mm In this scenario, you would choose the L series tool that covers the diameter. THRING SPILS (0) enquiries.eu@alliedmachine.com : 5

8 Product Nomenclature Roller urnishing Tools RK H , Type of urnisher 2. Series 3. Shank Type RK = Through holes H = H series F = F series P = P series T = T series 1 = Straight RSK = lind holes I = I series M = M series Q = Q series U = U series 2 = Morse Taper K = K series N = N series R = R series L = L series O = O series S = S series ORING 4. Length 5. age Style 6. iameter 0 = Unlimited 0 = Standard Through Hole Tools = Minimum diameter of burnishing range 1 = Short lind Hole Tools = iameter to burnish 2 = Standard 3 = Long RMING one Reduction Factor (lind Holes) When burnishing blind holes, the cone must not extend past the end of the rolls. If it does, the cone will collide with the bottom of the hole. ach burnishing tool has an adjustment range of: pproximately 0.5mm on diameter for tools below 12.7mm pproximately 1.0mm on diameter for tools above 12.7mm For through hole burnishing tools, the standard cone value "x" is 1. If the standard cone is used for blind hole burnishing, the only way it will not extend past the end of the rolls is to reduce the length of the cone. The required length reduction is dependent on the set diameter versus the minimum capable diameter of the tool. The factor of reduction (x) can be calculated using the formulas below and will be a whole integer number ranging from 2-8. The "x" value could result in a decimal figure. If so, round down for answers below 0.6, and round up for answers 0.6 and above. URNISHING iameter (5.89mm mm) x = 1 + Z - Y 0.05 Z = diameter of the hole Y = minimum diameter setting of tool iameter (12.64mm mm) x = 1 + Z - Y 0.10 Z = diameter of the hole Y = minimum diameter setting of tool iameter (127.90mm mm) x = 1 + Z - Y 0.10 Z = diameter of the hole Y = minimum diameter setting of tool xample: Z = Y = 10.71mm xample: Z = Y = 17.40mm xample: Z = Y = mm x = 1 + = which is approximated at "x" = 8 orrect one: RSTH x = 1 + = which is approximated at "x" = 4 orrect one: RSTK xx = = 34 orrect one: RSTT THRING Reference Key L 2 Symbol ttribute 1 L 2 iameter range urnishing length 1 L 3 Reference length L 3 SPILS : (0) enquiries.eu@alliedmachine.com

9 H Roller urnishing Tools Through Holes H Series (mini) iameter Range: 3.95mm mm (0.1555" ") 1 L 2 1 = 41 2 = 92 Ø Ø L 3 1 = = M.1 1 Part No. Spare Parts Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 38 SPILS (0) enquiries.eu@alliedmachine.com : 7

10 H Roller urnishing Tools Through Holes H Series iameter Range: 4.70mm mm (0.1850" ") 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No. Spare Parts ORING RMING URNISHING Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

11 H Roller urnishing Tools Through Holes (continued) H Series iameter Range: 4.70mm mm (0.1850" ") 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No. Spare Parts Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 38 SPILS (0) enquiries.eu@alliedmachine.com : 9

12 H Roller urnishing Tools lind Holes H Series iameter Range: 5.89mm mm (0.2319" ") 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts ORING RMING URNISHING Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one** RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. short series roller burnisher Ø 10.25mm with MT.1 shank: RSKH ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 39 : (0) enquiries.eu@alliedmachine.com

13 H Roller urnishing Tools lind Holes H Series iameter Range: 5.89mm mm (0.2319" ") 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one** RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. short series roller burnisher Ø 10.25mm with MT.1 shank: RSKH ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 11

14 I Roller urnishing Tools Through Holes I Series iameter Range: 12.64mm mm (0.4976" ") 1 L 2 1 = 47 2 = 98 3 = 149 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No. Spare Parts ORING RMING Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

15 I Roller urnishing Tools lind Holes I Series iameter Range: 12.64mm mm (0.4976" ") 1 L 2 1 = 47 2 = 98 3 = 149 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one** RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. long series roller burnisher Ø 14.00mm with MT.1 shank: RSKI ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 13

16 K Roller urnishing Tools Through Holes K Series iameter Range: 16.60mm mm (0.6535" ") 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No. Spare Parts ORING RMING URNISHING Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

17 K Roller urnishing Tools lind Holes K Series iameter Range: 16.60mm mm (0.6535" ") 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one** RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. standard series roller burnisher Ø 20.00mm with MT.1 shank: RSKK ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 15

18 L Roller urnishing Tools Through Holes L Series iameter Range: 24.54mm mm (0.9661" ") 1 = 47 L 2 2 = 98 Ø = 149 Ø L 3 1 = = = MT.1 M.1 1 Part No. Spare Parts ORING RMING URNISHING Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

19 Roller urnishing Tools lind Holes L Series iameter Range: 24.54mm mm (0.9661" ") 1 = 47 L 2 2 = 98 Ø = 149 Ø L L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Metric (mm) Imperial (in) L ssembly with ssembly with Straight Shank age one** RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. short series roller burnisher Ø 27.50mm with MT.1 shank: RSKL ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 17

20 F Roller urnishing Tools Through Holes F Series iameter Range: 24.54mm mm (0.9661" ") 1 Ø 24 Ø MT.1 M.1 1 Part No. Spare Parts ORING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. RMING URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

21 F Roller urnishing Tools lind Holes F Series iameter Range: 24.54mm mm (0.9661" ") 1 Ø 24 Ø MT.1 M.1 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 27.00mm with MT.1 shank: RSKF ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 19

22 M Roller urnishing Tools Through Holes M Series iameter Range: 30.85mm mm (1.2146" ") 1 Ø Ø MT.1 M.1 1 Part No. Spare Parts ORING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. RMING URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

M Roller urnishing Tools lind Holes M Series iameter Range: 30.85mm - 35.86mm (1.2146" - 1.4118") 1 Ø 30.80 Ø 19.05 127 38 MT.1 M.1 1 Part No.

23 M Roller urnishing Tools lind Holes M Series iameter Range: 30.85mm mm (1.2146" ") 1 Ø Ø MT.1 M.1 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 35.00mm with MT.2 shank: RSKM ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 21

24 N Roller urnishing Tools Through Holes N Series iameter Range: 35.61mm mm (1.4020" ") Ø 35 Ø MT.2 M.2 1 Part No. Spare Parts ORING RMING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTM RRY RKN RKN RN RTM RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTM RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

25 N Roller urnishing Tools lind Holes N Series iameter Range: 35.61mm mm (1.4020" ") Ø 35 Ø MT.2 M.2 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTM-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTM-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTM-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 40.00mm with straight shank: RSKN ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 23

26 O Roller urnishing Tools Through Holes O Series iameter Range: 46.71mm mm (1.8390" ") Ø 44 Ø MT.3 M.3 Through Holes 1 Part No. Spare Parts ORING RMING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

27 O Roller urnishing Tools lind Holes O Series iameter Range: 46.71mm mm (1.8390" ") Ø 44 Ø MT.3 M.3 lind Holes 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 50.25mm with MT.3 shank: RSKO ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 25

28 P Roller urnishing Tools Through Holes P Series iameter Range: 56.23mm mm (2.2138" ") Ø 44 Ø MT.3 M.3 Through Holes 1 Part No. Spare Parts ORING RMING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

29 P Roller urnishing Tools lind Holes P Series iameter Range: 56.23mm mm (2.2138" ") Ø 44 Ø MT.3 M.3 lind Holes 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 60.05mm with straight shank: RSKP ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 27

30 Q Roller urnishing Tools Through Holes Q Series iameter Range: 68.93mm mm (2.7138" ") Ø 44 Ø MT.3 M.3 Through Holes 1 Part No. Spare Parts ORING RMING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

31 Q Roller urnishing Tools lind Holes Q Series iameter Range: 68.93mm mm (2.7138" ") Ø 44 Ø MT.3 M.3 lind Holes 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 75.00mm with MT.3 shank: RSKQ ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 29

32 R Roller urnishing Tools Through Holes R Series iameter Range: 84.81mm mm ( ") Ø 75 Ø MT.4 M.4 Through Holes 1 Part No. Spare Parts ORING RMING URNISHING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

R Roller urnishing Tools lind Holes R Series iameter Range: 84.81mm - 104.12mm (3.3390-4.0992") Ø 75 Ø 38.10 1 MT.4 M.4 lind Holes 1 Part No.

33 R Roller urnishing Tools lind Holes R Series iameter Range: 84.81mm mm ( ") Ø 75 Ø MT.4 M.4 lind Holes 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with straight shank: RSKR ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 31

34 S Roller urnishing Tools Through Holes S Series iameter Range: mm mm ( ") Ø 75 Ø MT.4 M.4 Through Holes 1 Part No. Spare Parts ORING RMING URNISHING Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

35 S Roller urnishing Tools lind Holes S Series iameter Range: mm mm ( ") Ø 75 Ø MT.4 M.4 lind Holes 1 Part No.* Spare Parts Metric (mm) Imperial (in) ssembly with ssembly with Straight Shank age one** RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with MT.4 shank: RSKS ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 33

36 T Roller urnishing Tools Through Holes T Series iameter Range: mm mm ( ") 1 Ø 75 Ø MT.4 M.4 ORING RMING URNISHING Through Holes Metric (mm) 1 Part No. Spare Parts Imperial (in) ssembly with ssembly with Straight Shank age one RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

37 T Roller urnishing Tools lind Holes T Series iameter Range: mm mm ( ") 1 Ø 75 Ø MT.4 M.4 lind Holes Metric (mm) 1 Part No.* Spare Parts Imperial (in) ssembly with ssembly with Straight Shank age one** RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with straight shank: RSKT ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 35

38 U Roller urnishing Tools Through Holes U Series iameter Range: mm mm (5.9016" ") 1 Ø 75 Ø MT.4 M.4 ORING RMING Through Holes Metric (mm) 1 Part No. Spare Parts Imperial (in) ssembly with ssembly with Straight Shank age one RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. URNISHING THRING SPILS Key on : 1 : : : 38 : (0) enquiries.eu@alliedmachine.com

39 Roller urnishing Tools lind Holes U Series iameter Range: mm mm (5.9016" ") U 1 Ø 75 Ø MT.4 M.4 lind Holes Metric (mm) 1 Part No.* Spare Parts Imperial (in) ssembly with ssembly with Straight Shank age one** RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with MT.4 shank: RSKU ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING URNISHING THRING Key on : 1 : : : 39 SPILS (0) enquiries.eu@alliedmachine.com : 37

40 Through Holes 704 and 707 ORING RMING Part No. Metric (mm) Imperial (in) L L RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY L Metric (mm) Imperial (in) URNISHING Part No. L L RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY L THRING SPILS : (0) enquiries.eu@alliedmachine.com

41 lind Holes 706 Part No. Metric (mm) Imperial (in) L L RRY RRY RRY RRY RRY RRY RRY RRY RRY L Part No. Metric (mm) Imperial (in) L L RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY L ORING RMING URNISHING THRING SPILS (0) enquiries.eu@alliedmachine.com : 39

iameter djustment Release Spring Micrometer Nut Micrometer Sleeve one djustment Housing Lock Nut ORING djustment The roller burnishing tool incorporates a shank, a body, and a planetary system of

42 iameter djustment Release Spring Micrometer Nut Micrometer Sleeve one djustment Housing Lock Nut ORING djustment The roller burnishing tool incorporates a shank, a body, and a planetary system of conical rolls that are evenly spaced by a retaining cage. 1. Unscrew the lock nut. 2. Pull the housing toward the lock nut and rotate to increase or decrease the diameter. 3. Tighten the lock nut. IMPORTNT: s you increase the diameter, the cone moves forward, pushing the rolls outward. ecause of this, the cone will protrude from the end of the cage, decreasing the clearance available in blind holes (see Figures 1 and 2). Refer to chart below for clearance values. RMING Through Hole Tool lind Hole Tool URNISHING Inclination of the rolls Larger iameter = xtruded one = ecreased learance THRING djustment Range learance () Through Holes lind Holes / SPILS Metric (mm) Imperial (inch) Metric Inch Metric Inch Metric Inch : (0) enquiries.eu@alliedmachine.com

How it Works Roller urnishing Tools The roller burnishing tool must be aligned with the workpiece (maximum error = 0.1mm).

When the tool is in the hole, the cone pushes the rolls onto the surface to be burnished.

ORING This allows the pressure of the process to generate a self-feed that draws the tool into the hole.

spring) and then release from the surface of the hole.

from the rolls. This allows the tool to be retracted at a high feed rate.

43 How it Works Roller urnishing Tools The roller burnishing tool must be aligned with the workpiece (maximum error = 0.1mm). NOT: If you are uncertain about the alignment error, a floating shank is recommended. When the tool is in the hole, the cone pushes the rolls onto the surface to be burnished. The cage retains the rolls in an angled position to the axis of the tool. ORING This allows the pressure of the process to generate a self-feed that draws the tool into the hole. NOT: When self-feed is not required (blind hole applications), you must use a cage that holds the rolls parallel with the axis of the tool. If the machine feed is stopped or slower than the natural rate, the rolls pull the cage (held in position by the release spring) and then release from the surface of the hole. RMING When retracting the tool, the release spring ensures the cage is withdrawn from the cone, which removes pressure from the rolls. This allows the tool to be retracted at a high feed rate. If synthetic or water soluble coolant is not available, a lubrication is still required. plentiful supply of lubricant must be fed directly to the tool in order to provide a good flushing and cleaning action. It is recommended to fit a filter to the lubrication system to prevent the circulation of chips, which may cause damage to the burnished surface and/or the tool. URNISHING THRING SPILS (0) enquiries.eu@alliedmachine.com : 41

Drilling. Boring. Reaming. Threading. Roller Burnishing BURNISHING. Finishing Solutions by S.C.A.M.I. Specials

Drilling. Boring. Reaming. Threading. Roller Burnishing BURNISHING. Finishing Solutions by S.C.A.M.I. Specials rilling oring Reaming Threading Roller urnishing Finishing Solutions by S...M.I. Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH