T-A Original Drill Inserts
|
|
- Milo Webb
- 5 years ago
- Views:
Transcription
1 RILLING T- Replaceable Insert rilling System T- Original rill Inserts Series HSS iameter Range: 11.10mm mm ( ) 132 RILLING HSS Inserts - Premium obalt Insert mm inch quivalent mm TiN TilN TiN 18T N T N T N /64 18T N /32 18T N T N /64 18T N T N /2 18T N T N T N-.510 RMING THRING Key on 30: 1 30: : : 4-6 HI, HR, R, T, SK, NP, IN, RN, N, N, R, I, P, N, W oatings not listed above can be supplied as TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- SPILS (0) enquiries.eu@alliedmachine.com 30: 23
2 RILLING T- Replaceable Insert rilling System T- Original rill Inserts Series HSS iameter Range: 11.10mm mm ( ) RILLING 132 HSS Inserts - Super obalt Insert RMING mm inch quivalent mm TiN TilN TiN 15T N T N T N /64 15T N /32 15T N T N /64 15T N T N /2 15T N T N T N-.510 THRING SPILS Key on 30: 1 30: : : 4-6 HI, HR, R, T, SK, NP, IN, RN, N, N, R, I, P, N, W oatings not listed above can be supplied as TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- 30: (0) enquiries.eu@alliedmachine.com
3 RILLING T- Replaceable Insert rilling System T- Original rill Inserts Series HSS iameter Range: 11.10mm mm ( ) 90 RILLING 90 Spot & hamfer 180 HSS Inserts - Super obalt Flat ottom Insert 90 Spot & hamfer Flat ottom mm inch quivalent mm TiN TilN TiN TiN 15T-0014-SP SP 15N-0014-SP 15T-0014-F T-.451-SP SP 15N-.451-SP 15T-.451-F T-11.5-SP SP 15N-11.5-SP 15T-11.5-F /64 15T-.453-SP SP 15N-.453-SP 15T-.453-F /32 15T-0015-SP SP 15N-0015-SP 15T-0015-F T-12-SP SP 15N-12-SP 15T-12-F /64 15T-.484-SP SP 15N-.484-SP 15T-.484-F T-12.5-SP SP 15N-12.5-SP 15T-12.5-F /2 15T-0016-SP SP 15N-0016-SP 15T-0016-F T-.506-SP SP 15N-.506-SP 15T-.506-F T-.510-SP SP 15N-.510-SP 15T-.510-F RMING THRING Key on 30: 1 30: : : : 4-6 SW FN oatings not listed above can be supplied as TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- SPILS (0) enquiries.eu@alliedmachine.com 30: 25
4 RILLING T- Replaceable Insert rilling System T- Original rill Inserts Series arbide iameter Range: 11.10mm mm ( ) RILLING Flat ottom arbide Inserts - K20 (2) Insert Flat ottom RMING mm inch quivalent mm TiN TilN TiN 12T T-0014-F T T-.451-F T T-11.5-F /64 12T T-.453-F /32 12T T-0015-F T T-12-F /64 12T T-.484-F T T-12.5-F /2 12T T-0016-F T T-.506-F T T-.510-F THRING SPILS Key on 30: 1 30: : : : 4-6 HI, HR, R, T, SK, NP, IN, RN, N, N, R, I, P, N, W FN oatings not listed above can be supplied as TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- 30: (0) enquiries.eu@alliedmachine.com
5 RILLING T- Replaceable Insert rilling System T- Original rill Inserts Series arbide iameter Range: 11.10mm mm ( ) 132 RILLING arbide Inserts - P40 (5) K10 (3) N2 Insert 5 3 N2 mm inch quivalent mm TiN TilN TilN (ast Iron) iamond Film 15T I 1N T I 1N T I 1N /64 15T I 1N /32 15T I 1N T I 1N /64 15T I 1N T I 1N /2 15T I 1N T I 1N T I 1N RMING THRING Key on 30: 1 30: : : 4-6 HI, HR, R, T, SK, NP, IN, RN, N, N, R, I, P, N, W oatings not listed above can be supplied as TiN = 131T- TilN = 131- TiN = 131N- M200 = 131H- SPILS (0) enquiries.eu@alliedmachine.com 30: 27
6 RILLING T- Replaceable Insert rilling System T- rill Insert Holders Series Flanged RILLING 2 L 7 P 1 L 7 2 Stub Length P 1 P 2 Straight Flute ody RMING Length 2 L 7 P 1 Stub /16* 2100S-16FM Short /8* 2200S-20FM /8* 2700S-20FM /8* 2900S-20FM Stub 7/16-1/2 3/4 1-7/8 1-31/32 3-3/4 5/8 1-7/8 1/ S-063F Short 7/16-1/2 1-1/4 2-13/32 2-1/2 4-7/16 3/4 2-1/32 1/8 2200S-075F Standard 7/16-1/2 2-3/8 3-17/32 3-5/8 5-9/16 3/4 2-1/32 1/8 2400S-075F xtended 7/16-1/2 4-3/8 5-17/32 5-5/8 7-9/16 3/4 2-1/32 1/8 2500S-075F *Metric thread to SP and ISO 7-1 NOT: Stub length holders have a 1/8 side pipe tap (P 2 ) THRING onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7247-IP N-IP7-1 8IP-7 8IP-7TL 8IP-7 84 N-cm (7.4 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength SPILS Key on 30: 1 30: = Metric (mm) = Imperial (in) Screws sold in quantities of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. 30: (0) enquiries.eu@alliedmachine.com
7 T- rill Insert Holders Series Flanged RILLING T- Replaceable Insert rilling System 2 L 7 RILLING P 1 Helical Flute ody Length 2 L 7 P 1 Standard /8* 2400H-20FM Standard Plus /8* 2450H-20FM xtended /8* 2500H-20FM Long /8* 2600H-20FM Standard 7/16-1/2 2-3/8 3-17/32 3-5/8 5-9/16 3/4 2-1/32 1/8 2400H-075F Standard Plus 7/16-1/2 3-3/8 4-35/ / /64 3/4 2-1/32 1/8 2450H-075F xtended 7/16-1/2 4-3/8 5-17/32 5-5/8 7-9/16 3/4 2-1/32 1/8 2500H-075F Long 7/16-1/2 7-1/16 8-1/4 8-11/ /8 3/4 2-1/32 1/8 2600H-075F *Metric thread to SP and ISO 7-1 RMING onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7247-IP N-IP7-1 8IP-7 8IP-7TL 8IP-7 84 N-cm (7.4 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength THRING Key on 30: 1 30: = Metric (mm) = Imperial (in) Screws sold in quantities of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. SPILS (0) enquiries.eu@alliedmachine.com 30: 29
8 RILLING T- Replaceable Insert rilling System T- rill Insert Holders Series Taper RILLING P 2 MT R Straight Flute ody Length MT P 2 R Short #2** 1/16* 2T-2SRM 2200S-002M Short 7/16-1/2 1-1/4 2-1/ /32 6-5/16 #2 1/16 2T-2SR 2200S-002I Standard 7/16-1/2 2-3/8 3-5/ /32 7-7/16 #2 1/16 2T-2SR 2400S-002I xtended 7/16-1/2 4-3/8 5-5/ /32 9-7/16 #2 1/16 2T-2SR 2500S-002I *Metric thread to SP and ISO 7-1 **Per ISO 296 type K P 2 RMING MT R Helical Flute ody Length MT P 2 R Standard #2** 1/16* 2T-2SRM 2400H-002M xtended #2** 1/16* 2T-2SRM 2500H-002M Standard 7/16-1/2 2-3/8 3-5/ /32 7-7/16 #2 1/16 2T-2SR 2400H-002I xtended 7/16-1/2 4-3/8 5-5/ /32 9-7/16 #2 1/16 2T-2SR 2500H-002I *Metric thread to SP and ISO 7-1 **Per ISO 296 type K THRING onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips dmissible Tightening Torque* 7247-IP N-IP7-1 8IP-7 8IP-7TL 8IP-7 84 N-cm (7.4 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength SPILS Key on 30: 1 30: : 31 & 110 = Metric (mm) = Imperial (in) Screws sold in quantities of 10 WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. 30: (0) enquiries.eu@alliedmachine.com
9 T- rill Insert Holders Series Straight R ollet RILLING T- Replaceable Insert rilling System 2 L 7 RILLING Straight Flute P 1 ody Length 2 L 7 P 1 Short 7/16-1/2 1-1/4 2-1/32 2-1/8 4-13/32 3/4 2-3/8 1/8 2200S-075L Standard 7/16-1/2 2-3/8 3-5/32 3-1/4 5-17/32 3/4 2-3/8 1/8 2400S-075L xtended 7/16-1/2 4-3/8 5-5/32 5-1/4 7-17/32 3/4 2-3/8 1/8 2500S-075L L 7/16-1/2 8-3/4 9-17/32 9-5/ /32 3/4 2-3/8 1/8 2700S-075L 3L 7/16-1/2 11-7/ / / /32 3/4 2-3/8 1/8 2900S-075L R ollet Holder R RMING ody ollet Nut R without Retaining Ring 7/16-1/2 1-3/8 1-29/ /64 R S-16R R-16N 7/16-1/2 1-3/8 1-29/ /64 R S-20R R-20N T- rill ccessories Series Rotary oolant dapters Torx Plus Screws Rotary oolant dapter (R) and ccessories I O riving Rod Thread P 1 Kit ** R O-Rings Replacements M8 x /8* 2T-2SRM 2T1-2SR 2T1-2OR-10 3/4 1-3/4 7/8 5/ /8 2T-2SR 2T1-2SR 2T1-2OR-10 *Thread to SP and ISO 7-1 **R Repair Kit includes (2) O-rings, (2) snap rings, and (2) thrust washers Refer to page 30: 110 for proper R assembly and safety information onnection ccessories Insert Screws Nylon Locking Screws Insert river Preset Torque Hand river Replacement Tips Thread P 1 I O dmissible Tightening Torque* 7247-IP N-IP7-1 8IP-7 8IP-7TL 8IP-7 84 N-cm (7.4 in-lbs) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength THRING WRNING Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page 30: 150 for deep hole drilling guidelines in this section of the catalog. Visit for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our pplication ngineering Team. = Metric (mm) = Imperial (in) Screws sold in packs of 10 O-rings sold in packs of 10 SPILS (0) enquiries.eu@alliedmachine.com 30: 31
GEN2 T-A Drill Inserts
5/6 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 5 Series HSS iameter Range: 62.38mm - 76.20mm (2.456-3.000 ) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS mm
More informationGEN2 T-A Drill Inserts
7/8 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 7 Series HSS iameter Range: 89.10mm - 101.60mm (3.508-4.000 ) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS RMING
More informationBoring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials
oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -
More informationDrilling. Boring. Reaming. Threading. EcoCut MULTIFUNCTION TOOLING. Specials
rilling oring Reaming Threading cout MULTIFUNTION TOOLING Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622 United States 485
More informationMaking a difference. Structural Steel.
EN Making a difference Structural Steel www.alliedmaxcut.com Allied Maxcut (AMEC ) is the European Headquarters of Allied Machine & Engineering Corporation USA, a global leader in innovative high performance
More informationBoring. Reaming. Burnishing. Threading. Revolution Drill DRILLING. Indexable Insert Drilling System. Specials
oring Reaming urnishing Threading Revolution rill Indexable Insert rilling System Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH
More informationKEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
More informationINSTALLING T400 LOAD SENSORS
INSTALLING T400 LOAD SENSORS The above illustrations represent the proper arrangement of Model T400 Load Sensor kit parts using either the Drill and Tap method or the Weld method. A proper installation
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationFasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationThread Milling THREADING. Solid Carbide and Insert Style Thread Mills. AccuThread 856 AccuThread T3 ThreadMills. Drilling. Boring. Reaming.
rilling oring Reaming urnishing Thread Milling Solid arbide and Insert Style Thread Mills Specials ccuthread 856 ccuthread T3 ThreadMills US North merica urope sia llied Machine llied Machine llied Machine
More informationExtracts without expanding material Ideal for pipes and fittings Works on left-hand or right-hand threads
Serious Solutions for Stuck Fasteners IRWIN Tools has the solution to deal with a stuck fastener, a rounded or broken head, a snapped stud, or a stripped screw or fitting. Five different styles of extractors
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationBoring. Reaming. Burnishing. Threading. Opening Drill DRILLING. Indexable Insert Drilling System. Specials
oring Reaming urnishing Threading Opening rill Indexable Insert rilling System Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622
More informationSINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
More informationw w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models
-J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationPage 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
More informationMechanical Systems & Tools Syllabus [Detailed]
TECHNICAL TRAINING - SWAPPING DOWNTIME FOR PRODUCTIVITY! Mechanical Systems & Tools Syllabus [Detailed] Your automation.ie Fact Sheets! Understand Mechanical Energy Types! 1 Staying Safe in the Mechanical
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationVEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationPhone (800) Fax (330)
atalog 101 1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine
More informationDRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES
DRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES JOBBER DRILL SETS 13 Piece -1/16-1/4" x 64ths Material Drill Point Finish Brand HSS 118 Bright Precision Twist Drill PTD-090164 $21.15 HSS 118 Black Oxide Precision
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationDrilling. Boring. Reaming. Burnishing. Specials. Special Tooling Solutions. Threading. Now Featuring
rilling oring Reaming urnishing Specials Special Tooling Solutions Threading Now Featuring Special Tooling Solutions Superion Insta-Quote ngineered Specials Speciality is Our Speciality It s true. When
More informationMETCUT. METCUT... Hole Making and Hole Finishing Tool Specialists. Indexable Drills 7 ]] EXPANDED LINE OFFERING. Integrated Design and Production
METUT METUT... Hole Making and Hole Finishing Tool Specialists METUT has been a manufacturer of high quality cutting tools for more than 0 years, and during that time has earned a reputation for innovative
More informationThreading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationDrilling. Boring. Reaming. Burnishing. Special Tooling Solutions SPECIALS. Threading. Now Featuring
rilling oring Reaming urnishing Special Tooling Solutions SPILS Threading Now Featuring North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622
More informationSapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
More informationtel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
STR TOO SUPPY / RN TOO SUPPY TOO POST TURRTS SRIS 00: Tel: 01-18-81 / Fax: 01-9-7 0 Huyler St / So. Hackensack, NJ 070 US TISTOK TURRTS SRIS 00: SOI TH NTRS SRIS 1: Hardened and ground to closest tolerances.
More informationInstallation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
More informationHandout Activity: HA043
Handout Activity: HA043 Student/Intern information: Name Date Class Summary There are many different fasteners used in automotive applications, including screws, bolts, studs & nuts. Washers & chemical
More informationIndex. Installation and Tools. Installation and Tools... Page
Super SM Index... Page Connector Mounting Hole Chart.... 82 for Flange Mount.... 84 Mounting Hole Patterns and Seal Solder Tools... 85 for Thread-in.... 86 () for Thread-in.. 87 0.9 mm (SST) for Thread-in...
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationSapper XYZ Crossbar Monitor Arm Installation Instructions
02/13/2015 Sapper XYZ rossbar Monitor rm Installation Instructions 59046 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower to upper jaw 5/32
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationINSTALLATION INSTRUCTIONS
Sheet 1 of 5 General: Upon receipt of fixture thoroughly inspect for any freight damage, which should be brought to the attention of the delivery carrier. Compare the catalog description listed on the
More informationRhino SD2/XD2 Mini Tote Conversion Kit
Instruction Sheet P/N 1613210 01 Description See Figure 1. The Rhino SD2/XD2 mini tote conversion kit is used when the material container includes a follower as part of the container structure. The mini
More informationRTI TECHNOLOGIES, INC.
RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
More informationSC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationOPERATOR ADAPTER A21ABVA
OPERATOR ADAPTER A21ABVA Installation Instructions for Allen-Bradley Bulletin 1494V (variable depth), 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 37133 (Black) for Ford Ranger As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has a specific purpose.
More informationAssembly & Installation Instructions FOR VEHICLE MOUNT KIT USING VEHICLE CENTER MEMBER
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT 991002 USING VEHICLE CENTER MEMBER 9910092 TO FIT 99 - LATER Chevrolet 2500 Silverado 4x4 and 3500 Pickup 4x4 99 - LATER GM 2500 Sierra 4x4 and
More informationw w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationDrilling. Boring. Reaming. Burnishing. Special Tooling Solutions SPECIALS. Threading. Now Featuring
rilling oring Reaming urnishing Special Tooling Solutions Threading Now Featuring The Foundation Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions to the
More informationFootball Goal Posts MODEL SERIES: FGP400 and FGP600 series
Football Goal Posts MODEL SERIES: FGP400 and FGP600 series Installation and Maintenance Instructions Please read all instructions before attempting installation of these units SAVE THESE INSTRUCTIONS FOR
More informationRM4000 Tektronix 4000 Series Rackmount Kit
Instructions RM4000 Tektronix 4000 Series Rackmount Kit 071-2134-01 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationAir Cooled Engine Technology. Roth 9 th Ch 3 Fasteners & Sealing Pages 45 65
Roth 9 th Ch 3 Fasteners & Sealing Pages 45 65 1. Engine & equipment can be common or can be designed to perform specific functions. Fasteners Options Features 2. The of a fastener is actually an inclined
More informationDrilling. Boring. Reaming. Burnishing. AccuThread T3 THREADING. Solid Carbide Thread Mills. Specials
rilling oring Reaming urnishing ccuthread T3 Solid arbide Thread Mills Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH 44622 United
More informationRM4000 DPO4000 Series Rackmount Kit
Instructions RM4000 DPO4000 Series Rackmount Kit 071-1846-00 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you
More informationTHE ROGUE TM FUNSLIDE TM
THE ROGUE TM FUNSLIDE TM ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH ROGUE TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND POOLS ONLY. ROGUE
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationPage 1. SureMotion Quick-Start Guide: LACPACC_QS 1st Edition - Revision A 03/15/16
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LACPACC-002 LACPACC-003 LACP-16TxxLP5 (0.5-in lead screw pitch) LACP-16TxxL1 (1-in lead screw pitch) C P I R K 4 ea Flanged
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationCADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
More informationThread Repair & Thread Protection
Thread Repair & Thread Protection Screw Thread Inserts, Kits & Components for Industrial Maintenance, Repair and Overhaul Bulletin 998 C E R T I F I E D ISO 9001 AS 9100 TS 16949 ISO 14001 The HELI-COIL
More information3.1 MUELLER LARGE DRILLING MACHINES
MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available
More information3.1 MUELLER LARGE DRILLING MACHINES
MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available
More informationPARTITION INSTALLATION INSTRUCTIONS
PARTITION INSTALLATION INSTRUCTIONS 2015 Chevrolet Tahoe PPV / Part Number 5703FW, FWA & FEW Do not attempt to install this product on any vehicle equipped with third row seating! Parts List Distributed
More informationDrilling. Reaming. Burnishing. Threading. Boring WOHLHAUPTER. High Precision Boring Systems. Specials
rilling Reaming urnishing Threading oring WOHLHUPTR High Precision oring Systems Specials North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH
More informationPeco Fasteners 3/8 Internal Plug Drop In 50 Per Jar 3/8-16 SMART DROP IN ANCHOR ZINC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category 6337J 3/8-6 Smart Drop In Zinc Peco Fasteners,
More informationPro-Lock Retrofit Instruction Manual
Pro-Lock Retrofit Instruction Manual The manual provided here lists detailed steps on the most effective way to replace your Hurd and OEM Locks with a Pro- Lock unit. The steps outlined in this procedure
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (H) Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
More informationSSRLS-3 / SSRLU-3 Installation Instructions
5mm Hex Nut Upper Telescoping hannel & Screws Packing List QTY. ITM 1 Top Telescoping hannel 1 ottom Telescoping hannel w/ self drilling screw 15" 18" 1 Top and ottom Rod with connecting arm 25-½ 2 ¼ -
More informationAssembly and installation help
Assembly and installation help A supplement to the directions The Purpose of this tutorial is to expand (not replace) upon the directions that come with the system and to help provide shortcuts, the first
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationUSSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:
More informationFIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
More informationTaper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the Martin bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing
More informationA BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY
2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production
More informationSpecification Tapped holes f. coupl Scope Allocation of the JED Numbers General...
WABCO Specification 2003-07 Class: Engineering Guidelines Class No.:62 Tapped Holes for Couplings JED according to ISO 4039-2 464 Previous Edition Abbreviated Title 1985-11 Tapped holes f. coupl. 852 004
More informationTREX POST MOUNT DECKING AND CONCRETE
TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE
More informationFlat Panel Tilt Wall Mount (GPM-111)
INSTALLATION INSTRUCTIONS Flat Panel Tilt Wall Mount () The tilt wall mount fits most 23 to 30 displays. The is designed to adapt to VESA 200mm/100mm compliant displays. This mount will also adapt to standard
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More information55000/55010 Installation Instructions
A. Install 55015 B. Bolt roof rails, 55020/55025, to front hoop. C. Assemble 55026 D. To install without drilling into bumper. E. If mounting directly to bumper. A. 55015 Installation Instructions 55000/55010
More informationMAKO TM CASH DISPENSER
MAKO TM CASH DISPENSER PEDESTAL INSTALLATION GUIDE VERSION 2.0 TDN 0702-000 2/99 CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION) RETURN ADDRESS: 522 E. Railroad Street 2405 B Street Long Beach,
More informationThis manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4
More informationKIT. Assembly Instructions. HayDay, LLC
KIT Assembly Instructions HayDay, LLC 1-800-732-1654 www.stablegrazer.com Read completely through the assembly instructions before starting assembly. The Stable Grazer Kit comes in two boxes. Remove all
More informationK.D. LOCKER ASSEMBLY INSTRUCTIONS
K.D. Locker Assembly Instructions PN 0860 K.D. LOCKER Updated /05 ASSEMBLY INSTRUCTIONS These Instructions Cover 3 Types of Lockers: VANGUARD, GUARDIAN AND INVINCIBLE II Contents General Instructions 1
More informationHonda. Pioneer 1000 & U.H.M.W. Skid Plate / Under Armor package. Installation guide
Contact Us: FACTORY UTV LLC. 9237 Beatty Drive Sacramento, CA 95826 Phone : (96) 383-2730 E-mail : info@factoryutv.net Go online: www.factoryutv.net U.H.M.W. Skid Plate / Under Armor package Ultra. High.
More informationUNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench
Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J
More informationPLAYLAND 72 SPIRAL SLIDE 3.5 Posts, 3.5 Posts / 48 Grid and 5 Posts
PLAYLAND 72 SPIRAL SLIDE 3.5 Posts, 3.5 Posts / 48 Grid and 5 Posts USER GROUP: 2-12 RECOMMENDED CREW: 2 people TOOLS REQUIRED: T-30 TORX tool (supplied by manufacturer) T-45 TORX tool (supplied by manufacturer)
More information