Drilling. Boring. Reaming. Threading. Roller Burnishing BURNISHING. Finishing Solutions by S.C.A.M.I. Specials

Transcription

1 rilling oring Reaming Threading Roller urnishing Finishing Solutions by S...M.I. Specials

2 North merica urope sia llied Machine llied Machine llied Machine urope Wohlhaupter India 120 eeds rive over, OH United States 485 West 3rd Street over, OH United States 93 Vantage Point Pensnett state Kingswinford West Midlands Y6 7FR, United Kingdom -23, 2nd Floor lock ommunity entre Janakpuri, New elhi India ThreadMills US Superion Wohlhaupter GmbH 4185 rosstowne t # vans, G United States 1285 S Patton St. enia, OH United States Maybachstrasse 4 Postfach Frickenhausen Germany llied Machine & ngineering is a worldwide leader in holemaking and finishing solutions. We are committed to providing practical and dependable solutions to our customers through innovative designs and superior customer and technical support. We continue to expand our product offering in order to provide new and different solutions. With Field Sales ngineers located around the world, we position ourselves to provide technical support on site, right at your spindle.

3 S...M.I. Roller urnishing The Foundation The eginning Since 1941, llied Machine & ngineering has provided dependable and practical holemaking solutions to the world. What was once a small job shop in Ohio is now a worldwide leader in cutting tool technology. With three manufacturing facilities in Ohio, one in Georgia, another in Germany, and headquarters in both the United States and urope, llied Machine is positioned to bring innovative solutions and technical expertise directly to the customers hands. Harold. Stokey founded llied Machine & ngineering to aid the war effort, manufacturing taper bearing lock nuts for the production of M1 tanks. Years later, after a sales meeting gone wrong, Stokey possessed a warehouse stocked with spade drill inserts. He set forth into the industry that would become llied Machine s thriving identity: holemaking. The Innovation The People Since the development of the T-, llied Machine has expanded its product offering to support a vast range of customer applications, including large diameter and deep hole drilling, boring, reaming, burnishing, porting, and threading. Steve Stokey xecutive Vice President llied Machine understands that high quality products are only one facet of success. Our customer support is crucial to what we do, and that s why we make sure the best engineers and customer service associates are in place to assist our customers around the world. William H. Stokey President and O Mike Stokey xecutive Vice President ThreadMills US The T- When Harold s son, William H. Stokey, became the president and O, he developed the Throw way, or T-, spade drill insert system. The T- revolutionized the holemaking industry, launching llied Machine ahead of the competition. Since then, numerous innovations and advancements have been created from the T- s inspiration. The Future With over 75 years of experience, llied Machine has encountered the challenges of growth and success. y investing in cutting edge technology and the brightest and sharpest minds, our knowledge and capabilities continue to expand and grow every day.

4 Replaceable Insert rills Reduce costs by decreasing set-up time and utilizing a single holder for the lives of multiple inserts Provide flexibility to quickly switch between inserts with different geometries Products: - GN3SYS T GN3SYS T Pro - Original T- GN2 T- - High Performance Universal Indexable Insert rills Protect your investment and reduce your inventory with replaceable cartridges that allow the same holder to be used repeatedly Indexable inserts increase productivity and tool life while reducing costs Products: - 4T rill - Revolution rill - Opening rill Replaceable / Indexable Insert rills llow for higher spindle speeds and take advantage of the power curve on modern N machines chieve maximum penetration rates in deep hole drilling applications Holders cover a range of sizes with the replaceable heads determining the cutting diameter Products: - P rill Solid arbide rills Offer greater strength and stability when drilling tougher materials vailable in diameters from 3mm - 20mm an be made-to-order specifically for your application (Superion quoted specials) - S Superion

5 Structural Steel Solutions eliver outstanding performance and durability in structural steel applications esigned to produce optimal results in difficult-tomachine materials vailable in multiple lengths and diameters T- style drills have different insert geometry options to improve performance depending on material Products: - Original T- GN2 T- - GN3SYS T Pro T (STS) Machining Solutions The internal ejection system flushes chips and debris from the hole with no interference to the cutting process Utilizes the advantages of the T- drill insert esigned to significantly increase penetration rates over brazed heads and traditional gun drills Products: - T- rill Hydraulic Port ontour utters Save significant time and money by performing four processes in one step Replaceable insert design reduces costs, inventory, and set-up times vailable in 4 industry specifications: - Imperial: S J Metric: ISO : Military: S S John eere: JS-G173.1 Products: - ccuport 432 nhanced Special rilling apabilities llied Machine ngineers are available to meet with you to evaluate your application and recommend the best solution for you Special drilling solutions can incorporate advanced features such as adjustable diameter locations, multiple steps, additional coolant designs, special lengths and diameters, and more Special drills can drastically reduce your cost-per-hole and increase your overall productivity by eliminating multiple processes and increasing tool life

6 High Precision oring Systems esigns available for high volume applications that increase rigidity to improve performance Versatile boring heads that are flexible with changing applications while maintaining excellent performance Provides high precision with absolute repeatability to ensure every part is held to tolerance Offers an industry leading modular shank connection that maintains rigidity and reduces inventory on your boring system vailable with both digital and analog settings Products: - Wohlhaupter oring Tools Modular oring Systems The modular capabilities are ideal for use across multiple different projects Offers versatile boring heads suitable for all job shops and tooling rooms Provides an economical solution for low volume and/ or short-term production applications Offers both rough and finish boring solutions Products: - riterion oring Tools xpandable Reaming Solutions xpandable cutting diameters accommodate for wear, which extends tool life Replaceable cutting heads and rings reduce waste and improve production time versus solid high speed steel and carbide reamers Hold tight tolerances to ensure processes are performed to accurate specifications Reduce tooling costs because many items are available for recondition Products: - LVN Reamers Roller urnishing Solutions Produce excellent surface finishes Provide accurate size control Increase surface hardness Solutions for both through hole and blind hole applications Products: - S...M.I. Roller urnishing Tools

7 Solid arbide Thread Mills vailable with coolant through options over a wide range of thread forms Provide optimal solutions for both high production projects and short-run applications Products - ccuthread ccuthread T3 - ThreadMills US Replaceable Insert Thread Mills 3 insert lengths are available that cover a wide range of thread forms Holders can utilize inserts with different pitches and thread forms Repeatability is achieved by both the bolt-in style and the pin style locking systems Increase tool life by 25-50% with llied Machine s M210 coating Products - ccuthread 856: olt-in Style - ccuthread 856: Pin Style SPIL PILITIS When it comes to designing and developing special solutions for customers, llied Machine is the top choice. If your application requires special tooling, give us a call. Our engineered specials are developed by the brightest engineers in the industry. Most of our standard tooling can be altered as specials, or we can create entirely new concepts for particularly unique applications. One special tooling solution is Insta-Quote, the online system that allows you to design your own special tooling 24/7. Receive a quote and drawings within minutes just by following the steps. nd with the addition of Superion technology and capabilities, we can customize made-to-order solid carbide tools to achieve optimal results for your applications. Whatever your application, llied Machine has the answer.

8 Increase the production and success of your applications today. Offers direct access to 2 drawings and 3 models ssemble and view tool images in your browser ownload drawings for use in most machining software programs rowse products, search item numbers, and save assemblies for future use toolmd.com Tool-rchitect Find the right Wohlhaupter solution for your application. onfigure your complete tool assembly ompile an order list to be quoted Search and quickly find components using various criteria djust your language and measurement preferences tool-architect.com esign your custom tooling and receive a drawing and quote...all within minutes. esign and quote your own tooling Guides you through steps to generate the solution you need Features the following products - T- Inserts - T- Holders - GN3SYS T Holders - LVN Reamers iq.alliedmachine.com

9 Insta-ode liminate the wait. Get your program now. hoose the best thread mill for your application reate program code for your machine vailable as a P download app (that can be used offline) Website app available 24/7 Insta-ode also has a ycle Time alculator alliedmachine.com/instaode oring Insert Selector Find the best insert for your application. Generate the correct boring insert for your job in just six easy steps hoose type, shape, substrate, insert form, nose radius, and material asily order by adding the item to your cart Product Selector Use the product selector to find the right tool for your application. Guides you through steps to generate the right tool for your application Learn about your recommended tool and how to maximize its performance Machinist Tool pp Quickly convert cutting tool parameters for the machine inputs you need. Input data to calculate the RPM and speed and feed rates lso features the oring Insert Selector ccess product literature right at your fingertips

10 Roller urnishing Systems Through Hole Style lind Hole Style Get the Finish You Need llied Machine is proud to offer roller burnishing tools from S...M.I.. These hole finishing tools provide extremely high-quality surface finish on both through hole and blind hole applications. With roller burnishing, you can eliminate the need for slower and more costly finishing processes and secondary operations such as grinding, honing, and lapping. Not only will the roller burnishing tools create a smooth surface finish, but they will also harden the material and increase the wear resistance of the part. The benefits of this single operation result in the hole quality you should expect from llied Machine. reates fine surface finshes pplicable Industries Increases wear and corrosion resistance erospace griculture utomotive Firearms General Machining liminates other processes and saves you money Oil & Gas Renewable nergy Your safety and the safety of others is very important. This catalog contains important safety messages. lways read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WRNING WRNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTI means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOT and IMPORTNT are also used. These are important that you read and follow but are not safety-related. Visit for the most up-to-date information and procedures.

11 Reference Icons The following icons will appear throughout the catalog to help you navigate between products. Series Technical Information etailed instructions and information regarding the corresponding part(s) Through Hole Refers to the rolls available for through hole burnishing tools lind Hole Refers to the rolls available for blind hole burnishing tools Recommended utting ata Speed and feed recommendations for optimum and safe burnishing Imperial (inch) iameter Range Metric (mm) H I K L F M N O P Q R S T U Roller urnishing Systems ontents Introduction Information Roller urnishing Overview Product Offering Product Selection Guide Product Nomenclature urnishing Series H Series I Series K Series L Series F Series M Series N Series O Series P Series Q Series R Series S Series T Series U Series Technical Information iameter djustment How the urnisher Works Recommended utting ata Imperial (inch) Metric (mm) llied Machine & ngineering offers Roller urnishing tools through an exclusive supply agreement with S...M.I. s.n.c. S...M.I. is an Italian manufacturer that has been producing high quality cutting tools for over 40 years. Visit for additional information about all llied Machine products, or contact our pplication ngineering department for technical assistance. : 1

12 S...M.I. Roller urnishing Systems Roller urnishing Overview The Principle of Roller urnishing RILLING Roller burnishing is a cold-working process that produces a fine surface finish. The planetary rotation of the hardened rolls creates pressure over a metal surface. Unlike cold rolling, which produces large sectional changes, roller burnishing involves cold-working on the surface of the workpiece to improve the surface structure. ll machined surfaces consist of a series of peaks and valleys, all having irregular height and spacing. The plastic deformation created by roller burnishing is a displacement of the material in the peaks. When under pressure, the material in the peaks flows into the valleys. uring the process, tool marks and irregularities are rolled out, resulting in a mirror-like finish with a tough, work-hardened surface that is also wear and corrosion resistant. urnishing Roll ORING urnishing Pressure RMING dvantages of Roller urnishing: Metallurgical Properties Grain structure is condensed and refined. The compacted surface is smoother, harder, and more wear resistant than ground or honed surfaces. The process reduces surface porosity and also removes scratches that could hold reactive substances or contaminants. This increases the corrosion resistance. epending on the material, the surface hardness can be increased by as much as 10 points Rockwell. This may eliminate the need for heat treatment. The plastic deformation induces residual compressive stresses in the surface of the part. This increases the strength properties and fatigue life of the part because any forces on the part must overcome these residual stresses, as well as the tensile strength of the materials, before fatigue conditions occur. dvantages of Roller urnishing: Surface Finish reates a high finish to any machinable metal. Surfaces that are bored, reamed, or turned to 125 micro inches or more can be finished to 4 micro inch L or less in one pass (at feed rates of 125 to 300 mm/min). Roller burnishing replaces grinding, honing, lapping, and other expensive secondary operations. Tool marks are rolled out. Machined Surface urnished Surface THRING The Process The first contact with the machined surface occurs in Section. Plastic deformation occurs in Section as the yield point of the surface is exceeded. Section is the pressurized depth. Once the material endures the maximum compressive strain (Section ), it starts relieving elastically (Section ) through the finishing zone. This leaves a smooth surface and a compressive residual stress of significant peak value. ompressive Residual Stress SPILS The stresses formed on the material during the compression decrease toward the center. These stresses reach approximately 1mm below the surface. This increases the surface hardness. Tensile Residual Stress : 2

13 S...M.I. Roller urnishing Systems Roller urnishing Overview When to Roller urnish onditions for Roller urnishing Roller burnishing is a cold working process used to achieve fine hole finishes. In order to achieve the most optimal results, adhere to the benchmarks below: Finishing: The ductility and hardness of the workpiece material along with the surface preparation dictates the quality of the burnished finish. Workability: ny ductile and malleable material up to R40 can be roller burnished. Worked Surface Properties: Workpieces with an interrupted surface within 10% of the circumference can be successfully burnished with a standard tool (see Figures 1 and 2) RILLING ORING Figure 1 Figure 2 Tolerance of the urnished Piece: The tolerance range achieved from the burnishing will be equal to that achieved from the pre-machining since no material will be removed. The ideal surface for burnishing consists of a succession of peaks. These peaks correspond on regular feed of the preparation tool (see Figure 3). We suggest the LVN expandable reamer for pre-burnishing because it creates a uniform roughness and a tolerance range of H6 - H7. RMING Figure 3 Pre-machining tapers and surface irregularities caused by cutting tool failure must be noted because these conditions cannot be corrected by the roller burnishing process (see Figures 4 and 5). hipped cutting edge Figure 4 Tapered preparation THRING Figure 5 SPILS : 3

14 S...M.I. Roller urnishing Systems Product Offering RILLING Through Hole Style " " (3.95mm mm) lind Hole Style " " (4.70mm mm) ORING dvantages of the Roller urnishing Tool Provides accurate size control tolerances within " or better (depending on variables such as material) Produces fine surface finishes between 1-10 microinches Ra RMING Increases surface hardness by 5-10% or more Performs a much cleaner operation than honing or other abrasive finishing methods Provides versatility because the operation can be performed on any rotating spindle liminates the need for slower and costly finishing processes and secondary operations such as grinding, honing, lapping, etc. age Sleeve Lock Nut THRING one age djustment Housing ssembly Shank (either Straight or Morse Taper) The Tool omponents SPILS ll roller burnishing tools (both through hole and blind hole) are composed of the basic burnisher assembly, including: age one Shank (either straight or Morse Taper) : 4

15 S...M.I. Roller urnishing Systems Product Selection Guide Series iameter Range (inch / mm) Short Length Standard Long Unlimited RILLING H* I K L ORING F M N O RMING P Q R S T U *For H series: through hole tools start at " (3.95mm) and blind hole tools start at " (4.70mm) When to ORR UP THRING In some cases, there will be a diameter overlap between a series and the series after it. If the diameter you need falls into this overlap, choose the higher of the two series. xample: You need a 24.64mm diameter tool. This diameter falls into both the K series and the L series. K series diameter range = 16.60mm mm L series diameter range = 24.54mm mm In this scenario, you would choose the L series tool that covers the diameter. SPILS : 5

16 S...M.I. Roller urnishing Systems Product Nomenclature Roller urnishing Tools RILLING RK H , Type of urnisher 2. Series 3. Shank Type ORING RK = Through holes H = H series F = F series P = P series T = T series 1 = Straight RSK = lind holes I = I series M = M series Q = Q series U = U series 2 = Morse Taper K = K series N = N series R = R series L = L series O = O series S = S series 4. Length 5. age Style 6. iameter 0 = Unlimited 0 = Standard Through Hole Tools = Minimum diameter of burnishing range 1 = Short lind Hole Tools = iameter to burnish 2 = Standard 3 = Long RMING one Reduction Factor (lind Holes) When burnishing blind holes, the cone must not extend past the end of the rolls. If it does, the cone will collide with the bottom of the hole. ach burnishing tool has an adjustment range of: pproximately 0.5mm on diameter for tools below 12.7mm pproximately 1.0mm on diameter for tools above 12.7mm For through hole burnishing tools, the standard cone value "x" is 1. If the standard cone is used for blind hole burnishing, the only way it will not extend past the end of the rolls is to reduce the length of the cone. The required length reduction is dependent on the set diameter versus the minimum capable diameter of the tool. The factor of reduction (x) can be calculated using the formulas below and will be a whole integer number ranging from 2-8. The "x" value could result in a decimal figure. If so, round down for answers below 0.6, and round up for answers 0.6 and above. iameter (5.89mm mm) x = 1 + Z - Y 0.05 Z = diameter of the hole Y = minimum diameter setting of tool iameter (12.64mm mm) x = 1 + Z - Y 0.10 Z = diameter of the hole Y = minimum diameter setting of tool iameter (127.90mm mm) x = 1 + Z - Y 0.10 Z = diameter of the hole Y = minimum diameter setting of tool xample: Z = Y = 10.71mm xample: Z = Y = 17.40mm xample: Z = Y = mm THRING x = = 7.8 which is approximated at "x" = 8 orrect one: RSTH x = = 4.6 which is approximated at "x" = 4 orrect one: RSTK xx = = 34 orrect one: RSTT Reference Key Symbol ttribute L 2 SPILS 1 L 2 L 3 iameter range urnishing length Reference length 1 L 3 : 6

17 Roller urnishing Tools Through Holes H Series (mini) iameter Range: " " (3.95mm mm) S...M.I. Roller urnishing Systems H 1 L 2 1 = 41 2 = 92 Ø Ø RILLING L 3 1 = = M.1 1 Part No. Spare Parts Imperial (in) Metric (mm) L Straight Shank age one RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 38 SPILS : 7

18 H S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes H Series iameter Range: " " (4.70mm mm) RILLING 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 ORING RMING THRING 1 Part No. Spare Parts Imperial (in) Metric (mm) L Straight Shank age one RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY RKH RKH RH RSTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. SPILS Key on : 1 : : : 38 : 8

19 S...M.I. Roller urnishing Systems H Roller urnishing Tools Through Holes (continued) H Series iameter Range: " " (4.70mm mm) 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø RILLING L 3 1 = = = MT.1 M.1 1 Part No. Spare Parts Imperial (in) Metric (mm) L Straight Shank age one RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY RKH RKH RH RTH RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 38 SPILS : 9

20 H S...M.I. Roller urnishing Systems Roller urnishing Tools lind Holes H Series iameter Range: " " (5.89mm mm) RILLING 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 ORING RMING 1 Part No.* Spare Parts Imperial (in) Metric (mm) L Straight Shank age one** RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. short series roller burnisher Ø 10.25mm with MT.1 shank: RSKH ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 39 : 10

21 S...M.I. Roller urnishing Systems H Roller urnishing Tools lind Holes (continued) H Series iameter Range: " " (5.89mm mm) 1 L 2 1 = 41 2 = 92 3 = 143 Ø Ø RILLING L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Imperial (in) Metric (mm) L Straight Shank age one** RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY RSKH-210-xxxxx RSKH-110-xxxxx RSH RSTH-03x RSRY RSKH-220-xxxxx RSKH-120-xxxxx RSH RSTH-03x RSRY RSKH-230-xxxxx RSKH-130-xxxxx RSH RSTH-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. short series roller burnisher Ø 10.25mm with MT.1 shank: RSKH ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 11

22 I S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes I Series iameter Range: " " (12.64mm mm) RILLING L 2 1 = 47 2 = 98 3 = 149 Ø Ø L 3 1 = = = MT.1 M.1 ORING RMING 1 Part No. Spare Parts Imperial (in) Metric (mm) L Straight Shank age one RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY RKI RKI RI RTI RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : 12

23 S...M.I. Roller urnishing Systems I Roller urnishing Tools lind Holes I Series iameter Range: " " (12.64mm mm) L 2 1 = 47 2 = 98 3 = 149 Ø Ø RILLING 1 L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Imperial (in) Metric (mm) L Straight Shank age one** RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY RSKI-210-xxxxx RSKI-110-xxxxx RSI RSTI RSRY RSKI-220-xxxxx RSKI-120-xxxxx RSI RSTI RSRY RSKI-230-xxxxx RSKI-130-xxxxx RSI RSTI RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. long series roller burnisher Ø 14.00mm with MT.1 shank: RSKI ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 13

24 K S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes K Series iameter Range: " " (16.60mm mm) RILLING L 2 1 = 41 2 = 92 3 = 143 Ø Ø L 3 1 = = = MT.1 M.1 ORING RMING THRING 1 Part No. Spare Parts Imperial (in) Metric (mm) L Straight Shank age one RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY RKK RKK RK RTK RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. SPILS Key on : 1 : : : 38 : 14

25 S...M.I. Roller urnishing Systems K Roller urnishing Tools lind Holes K Series iameter Range: " " (16.60mm mm) L 2 1 = 41 2 = 92 3 = 143 Ø Ø RILLING 1 L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Imperial (in) Metric (mm) L Straight Shank age one** RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY RSKK-210-xxxxx RSKK-110-xxxxx RSK RSTK-03x RSRY RSKK-220-xxxxx RSKK-120-xxxxx RSK RSTK-03x RSRY RSKK-230-xxxxx RSKK-130-xxxxx RSK RSTK-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. standard series roller burnisher Ø 20.00mm with MT.1 shank: RSKK ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 15

26 L S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes L Series iameter Range: " " (24.54mm mm) RILLING 1 = 47 L 2 2 = 98 Ø = 149 Ø L 3 1 = = = MT.1 M.1 ORING RMING 1 Part No. Spare Parts Imperial (in) Metric (mm) L Straight Shank age one RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY RKL RKL RL RTL RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : 16

27 S...M.I. Roller urnishing Systems L Roller urnishing Tools lind Holes L Series iameter Range: " " (24.54mm mm) 1 = 47 L 2 2 = 98 Ø = 149 Ø RILLING 1 L 3 1 = = = MT.1 M.1 1 Part No.* Spare Parts Imperial (in) Metric (mm) L Straight Shank age one** RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY RSKL-210-xxxxx RSKL-110-xxxxx RSL RSTL-03x RSRY RSKL-220-xxxxx RSKL-120-xxxxx RSL RSTL-03x RSRY RSKL-230-xxxxx RSKL-130-xxxxx RSL RSTL-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. short series roller burnisher Ø 27.50mm with MT.1 shank: RSKL ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 17

28 F S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes F Series iameter Range: " " (24.54mm mm) RILLING Ø 24 Ø MT.1 M.1 ORING RMING Imperial (in) 1 Part No. Spare Parts Metric (mm) Straight Shank age one RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY RKF RKF RL RTF RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : 18

29 S...M.I. Roller urnishing Systems F Roller urnishing Tools lind Holes F Series iameter Range: " " (24.54mm mm) Ø 24 Ø 10 RILLING MT.1 M.1 Imperial (in) 1 Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY RSKF-200-xxxxx RSKF-100-xxxxx RSL RSTF-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 27.00mm with MT.1 shank: RSKF ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 19

30 M S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes M Series iameter Range: " " (30.85mm mm) RILLING Ø Ø MT.1 M.1 ORING Imperial (in) 1 Part No. Spare Parts Metric (mm) Straight Shank age one RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY RKM RKM RM RTM RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. RMING THRING SPILS Key on : 1 : : : 38 : 20

31 S...M.I. Roller urnishing Systems M Roller urnishing Tools lind Holes M Series iameter Range: " " (30.85mm mm) Ø Ø RILLING MT.1 M.1 Imperial (in) 1 Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY RSKM-200-xxxxx RSKM-100-xxxxx RSM RSTM-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 35.00mm with MT.2 shank: RSKM ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 21

32 N S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes N Series iameter Range: " " (35.61mm mm) RILLING Ø 35 Ø MT.2 M.2 ORING RMING Imperial (in) 1 Part No. Spare Parts Metric (mm) Straight Shank age one RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTM RRY RKN RKN RN RTM RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTM RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY RKN RKN RN RTN RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : 22

33 S...M.I. Roller urnishing Systems N Roller urnishing Tools lind Holes N Series iameter Range: " " (35.61mm mm) Ø 35 Ø RILLING MT.2 M.2 Imperial (in) 1 Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTM-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTM-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTM-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY RSKN-200-xxxxx RSKN-100-xxxxx RSN RSTN-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 40.00mm with straight shank: RSKN ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. ORING RMING THRING Key on : 1 : : : 39 SPILS : 23

34 O S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes O Series iameter Range: " " (46.71mm mm) RILLING Ø 44 Ø ORING RMING Through Holes Imperial (in) Part No. Spare Parts Metric (mm) Straight Shank age one RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY RKO RKO RO RTO RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.3 M.3 THRING SPILS Key on : 1 : : : 38 : 24

35 S...M.I. Roller urnishing Systems O Roller urnishing Tools lind Holes O Series iameter Range: " " (46.71mm mm) Ø 44 Ø RILLING 1 lind Holes Imperial (in) Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY RSKO-200-xxxxx RSKO-100-xxxxx RSO RSTO-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 50.25mm with MT.3 shank: RSKO ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.3 M.3 ORING RMING THRING Key on : 1 : : : 39 SPILS : 25

36 P S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes P Series iameter Range: " " (56.23mm mm) RILLING Ø 44 Ø ORING RMING Through Holes Imperial (in) 1 Part No. Spare Parts Metric (mm) 178 Straight Shank age one RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY RKP RKP RP RTP RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. 63 MT.3 M.3 THRING SPILS Key on : 1 : : : 38 : 26

37 S...M.I. Roller urnishing Systems P Roller urnishing Tools lind Holes P Series iameter Range: " " (56.23mm mm) Ø 44 Ø RILLING 1 lind Holes Imperial (in) Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY RSKP-200-xxxxx RSKP-100-xxxxx RSP RSTP-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 60.05mm with straight shank: RSKP ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.3 M.3 ORING RMING THRING Key on : 1 : : : 39 SPILS : 27

38 Q S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes Q Series iameter Range: " " (68.93mm mm) RILLING Ø 44 Ø ORING RMING Through Holes Imperial (in) 1 Part No. Spare Parts Metric (mm) 178 Straight Shank age one RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY RKQ RKQ RQ RTQ RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. 63 MT.3 M.3 THRING SPILS Key on : 1 : : : 38 : 28

39 S...M.I. Roller urnishing Systems Q Roller urnishing Tools lind Holes Q Series iameter Range: " " (68.93mm mm) Ø 44 Ø RILLING 1 lind Holes Imperial (in) 1 Part No.* Spare Parts Metric (mm) 178 Straight Shank age one** RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY RSKQ-200-xxxxx RSKQ-100-xxxxx RSQ RSTQ-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø 75.00mm with MT.3 shank: RSKQ ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. 63 MT.3 M.3 ORING RMING THRING Key on : 1 : : : 39 SPILS : 29

40 R S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes R Series iameter Range: " (84.81mm mm) RILLING Ø 75 Ø ORING RMING Through Holes Imperial (in) 1 Part No. Spare Parts Metric (mm) Straight Shank age one RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY RKR RKR RR RTR RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.4 M.4 THRING SPILS Key on : 1 : : : 38 : 30

41 S...M.I. Roller urnishing Systems R Roller urnishing Tools lind Holes R Series iameter Range: " (84.81mm mm) Ø 75 Ø RILLING 1 lind Holes Imperial (in) 1 Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY RSKR-200-xxxxx RSKR-100-xxxxx RSR RSTR x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with straight shank: RSKR ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.4 M.4 ORING RMING THRING Key on : 1 : : : 39 SPILS : 31

42 S S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes S Series iameter Range: " (103.86mm mm) RILLING Ø 75 Ø ORING RMING THRING Through Holes Imperial (in) 1 Part No. Spare Parts Metric (mm) Straight Shank age one RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY RKS RKS RS RTS RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.4 M.4 SPILS Key on : 1 : : : 38 : 32

43 S...M.I. Roller urnishing Systems S Roller urnishing Tools lind Holes S Series iameter Range: " (103.86mm mm) Ø 75 Ø RILLING 1 lind Holes Imperial (in) 1 Part No.* Spare Parts Metric (mm) Straight Shank age one** RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY RSKS-200-xxxxx RSKS-100-xxxxx RSS RSTS-03x RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with MT.4 shank: RSKS ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. MT.4 M.4 ORING RMING THRING Key on : 1 : : : 39 SPILS : 33

44 T S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes T Series iameter Range: " (127.90mm mm) RILLING Ø 75 Ø MT.4 M.4 ORING Through Holes 1 Part No. Spare Parts RMING Imperial (in) Metric (mm) Straight Shank age one RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY RKT RKT RT RTT RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : 34

45 S...M.I. Roller urnishing Systems T Roller urnishing Tools lind Holes T Series iameter Range: " (127.90mm mm) Ø 75 Ø RILLING 1 MT.4 M.4 lind Holes 1 Part No.* Spare Parts ORING Imperial (in) Metric (mm) Straight Shank age one** RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY RSKT-200-xxxxx RSKT-100-xxxxx RST RSTT-0xx RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with straight shank: RSKT ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. RMING THRING Key on : 1 : : : 39 SPILS : 35

46 U S...M.I. Roller urnishing Systems Roller urnishing Tools Through Holes U Series iameter Range: " " (149.90mm mm) RILLING Ø 75 Ø MT.4 M.4 ORING Through Holes 1 Part No. Spare Parts RMING Imperial (in) Metric (mm) Straight Shank age one RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY RKU RKU RU RTU RRY NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. THRING SPILS Key on : 1 : : : 38 : 36

47 S...M.I. Roller urnishing Systems U Roller urnishing Tools lind Holes U Series iameter Range: " " (149.90mm mm) Ø 75 Ø RILLING 1 MT.4 M.4 lind Holes 1 Part No.* Spare Parts ORING Imperial (in) Metric (mm) Straight Shank age one** RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY RSKU-200-xxxxx RSKU-100-xxxxx RSU RSTU-0xx RSRY *xxxxx = Indicate to 2 metric decimal places the size to be burnished (e.g. roller burnisher Ø mm with MT.4 shank: RSKU ). **x = number that will vary from 2 to 8 depending upon the exact diameter to be burnished. See page : 6 for the correct identification of the "x" value. NOT: ach roller burnishing tool comes assembled complete with cage, cone, and rolls. RMING THRING Key on : 1 : : : 39 SPILS : 37

48 S...M.I. Roller urnishing Systems Through Holes RILLING ORING RMING 704 and 707 Part No. Imperial (in) Metric (mm) L L RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY L 701 Part No. Imperial (in) Metric (mm) L L RRY RRY RRY RRY RRY RRY RRY RRY RRY RRY L THRING SPILS : 38

49 S...M.I. Roller urnishing Systems lind Holes 708 Part No. Imperial (in) Metric (mm) L L RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY RSRY L RILLING ORING RMING THRING SPILS : 39

50 S...M.I. Roller urnishing Systems iameter djustment RILLING Release Spring Micrometer Nut Micrometer Sleeve one ORING RMING djustment djustment Housing Lock Nut The roller burnishing tool incorporates a shank, a body, and a planetary system of conical rolls that are evenly spaced by a retaining cage. 1. Unscrew the lock nut. 2. Pull the housing toward the lock nut and rotate to increase or decrease the diameter. 3. Tighten the lock nut. IMPORTNT: s you increase the diameter, the cone moves forward, pushing the rolls outward. ecause of this, the cone will protrude from the end of the cage, decreasing the clearance available in blind holes (see Figures 1 and 2). Refer to chart below for clearance values. Through Hole Tool lind Hole Tool Inclination of the rolls THRING Larger iameter = xtruded one = ecreased learance djustment Range Through Holes learance () lind Holes SPILS Imperial (inch) Metric (mm) / : 40

51 S...M.I. Roller urnishing Systems How it Works Roller urnishing Tools The roller burnishing tool must be aligned with the workpiece (maximum error = 0.1mm). NOT: If you are uncertain about the alignment error, a floating shank is recommended. When the tool is in the hole, the cone pushes the rolls onto the surface to be burnished. The cage retains the rolls in an angled position to the axis of the tool. RILLING ORING This allows the pressure of the process to generate a self-feed that draws the tool into the hole. NOT: When self-feed is not required (blind hole applications), you must use a cage that holds the rolls parallel with the axis of the tool. If the machine feed is stopped or slower than the natural rate, the rolls pull the cage (held in position by the release spring) and then release from the surface of the hole. RMING When retracting the tool, the release spring ensures the cage is withdrawn from the cone, which removes pressure from the rolls. This allows the tool to be retracted at a high feed rate. If synthetic or water soluble coolant is not available, a lubrication is still required. plentiful supply of lubricant must be fed directly to the tool in order to provide a good flushing and cleaning action. It is recommended to fit a filter to the lubrication system to prevent the circulation of chips, which may cause damage to the burnished surface and/or the tool. THRING SPILS : 41

52 S...M.I. Roller urnishing Systems Recommended utting ata Imperial (inch) Roller urnishing RILLING Recommended Feed (IPR) by urnisher iameter ORING RMING ISO P S M K N Material Hardness (HN) Speed (SFM) Free Machining Steel , 1215, 12L14, etc Low arbon Steel , 1020, 1025, 1522, 1144, etc Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc lloy Steel , 5140, 8640, etc High Strength lloy , 4330V, 300M, etc. Structural Steel , 285, 516, etc Tool Steel H-13, H-21, -4, 0-2, S-3, etc High Temp lloy Hastelloy, Inconel 600, etc. Titanium lloy Stainless Steel 400 Series , 420, etc. Stainless Steel 300 Series , 316, 17-4PH, etc. Grey ast Iron, uctile Iron, < Spheroidal ast Iron (Pearlitic) > Spheroidal ast Iron (Ferritic) opper and lloys < rass ronze < ronze Phosphorous luminum and lloys < Max RPM THRING Series Max RPM H 2000 I 1500 K 1200 L 1000 F 1000 M 900 N 900 O 700 P 600 Q 500 R 300 S 300 T 250 U 200 SPILS IMPORTNT: The speeds and feeds listed on these pages are a general starting point for all applications. Factory technical assistance is available through our pplication ngineering department. : 42

53 S...M.I. Roller urnishing Systems Stock llowance Imperial (inch) Roller urnishing Recommended Stock (inch) by urnisher iameter* RILLING ISO P S M Material Hardness (HN) Free Machining Steel , 1215, 12L14, etc Low arbon Steel , 1020, 1025, 1522, 1144, etc Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc lloy Steel , 5140, 8640, etc High Strength lloy , 4330V, 300M, etc. Structural Steel , 285, 516, etc Tool Steel H-13, H-21, -4, 0-2, S-3, etc High Temp lloy Hastelloy, Inconel 600, etc. Titanium lloy Stainless Steel 400 Series , 420, etc. Stainless Steel 300 Series , 316, 17-4PH, etc. ORING RMING K N Grey ast Iron, uctile Iron, < Spheroidal ast Iron (Pearlitic) > Spheroidal ast Iron (Ferritic) opper and lloys < rass ronze < ronze Phosphorous luminum and lloys < *Stock value is on diameter. THRING SPILS : 43

54 S...M.I. Roller urnishing Systems Recommended utting ata Metric (mm) Roller urnishing RILLING Recommended Feed (mm/rev) by urnisher iameter ORING RMING ISO P S M K N Material Hardness (HN) Speed (M/min) Free Machining Steel , 1215, 12L14, etc Low arbon Steel , 1020, 1025, 1522, 1144, etc Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc lloy Steel , 5140, 8640, etc High Strength lloy , 4330V, 300M, etc. Structural Steel , 285, 516, etc Tool Steel H-13, H-21, -4, 0-2, S-3, etc High Temp lloy Hastelloy, Inconel 600, etc. Titanium lloy Stainless Steel 400 Series , 420, etc. Stainless Steel 300 Series , 316, 17-4PH, etc. Grey ast Iron, uctile Iron, < Spheroidal ast Iron (Pearlitic) > Spheroidal ast Iron (Ferritic) opper and lloys < rass ronze < ronze Phosphorous luminum and lloys < Max RPM THRING Series Max RPM H 2000 I 1500 K 1200 L 1000 F 1000 M 900 N 900 O 700 P 600 Q 500 R 300 S 300 T 250 U 200 SPILS IMPORTNT: The speeds and feeds listed on these pages are a general starting point for all applications. Factory technical assistance is available through our pplication ngineering department. : 44

55 S...M.I. Roller urnishing Systems Stock llowance Metric (mm) Roller urnishing Recommended Stock (mm) by urnisher iameter* RILLING ISO P S M Material Hardness (HN) Free Machining Steel , 1215, 12L14, etc Low arbon Steel , 1020, 1025, 1522, 1144, etc Medium arbon Steel , 1040, 1050, 1527, 1140, 1151, etc lloy Steel , 5140, 8640, etc High Strength lloy , 4330V, 300M, etc. Structural Steel , 285, 516, etc Tool Steel H-13, H-21, -4, 0-2, S-3, etc High Temp lloy Hastelloy, Inconel 600, etc. Titanium lloy Stainless Steel 400 Series , 420, etc. Stainless Steel 300 Series , 316, 17-4PH, etc. ORING RMING K N Grey ast Iron, uctile Iron, < Spheroidal ast Iron (Pearlitic) > Spheroidal ast Iron (Ferritic) opper and lloys < rass ronze < ronze Phosphorous luminum and lloys < *Stock value is on diameter. THRING SPILS : 45

56 S...M.I. Roller urnishing Systems Notes RILLING ORING RMING THRING SPILS : 46

57 S...M.I. Roller urnishing Systems Notes RILLING ORING RMING THRING SPILS : 47

58 S...M.I. Roller urnishing Systems Notes RILLING ORING RMING THRING SPILS : 48

59 Warranty Information llied Machine & ngineering warrants to original equipment manufacturers, distributors, industrial and commercial users of its products that each new product manufactured or supplied by llied Machine shall be free from defects in material and workmanship. llied Machine s obligation under this warranty is limited to furnishing without additional charge a replacement or, at its option repairing or issuing credit for any product which shall within one year from the date of sale be returned freight prepaid to the plant designated by an llied Machine representative and which upon inspection is determined by llied Machine to be defective in materials or workmanship. omplete information as to operating conditions, machine, set-up, and application of cutting fluid should accompany any product returned for inspection. The provisions of this warranty shall not apply to any llied Machine products which have been subjected to misuse, improper operating conditions, machine set-up or application of cutting fluid or which have been repaired or altered if such repair or alteration in the judgment of llied Machine would adversely affect performance of the product. THIS WRRNTY IS IN LIU OF LL OTHR WRRNTIS, PRSS OR IMPLI, INLUING NY IMPLI WRRNTY OF MRHNTILITY OR FITNSS FOR PRTIULR PURPOS. llied Machine shall have no liability or responsibility on any claim of any kind, whether in contract, tort or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery or use of any product sold hereunder, in excess of the cost of replacement or repair as provided herein. LL PRIS, LIVRIS, SIGNS, N MTRILS R SUJT TO HNG WITHOUT NOTI. llied Machine & ngineering Registered to ISO