CVR OF 1 SHEETS SOLAR PHOTOVOLTAIC SYSTEM JOSE D. GARCIA JENSEN BEACH, FLORIDA NE SUGARHILL AVENUE PROPOSED PLANS FOR: DAVEY RESIDENCE

Transcription

1 JOB No.: CVR O 1 S PROPOSED PLANS OR: DAVEY RESIDENCE JENSEN BEACH, LORIDA N.E. 4th. Ave. North Miami Beach, l Tel: (30) jgarcia.pe@outlook.com LA. P.E. Licence No. 7846

2 DRAWN : JG JOB No.: S-1 O 1 S PROPOSED PLANS OR: DAVEY RESIDENCE JENSEN BEACH, LORIDA N.E. 4th. Ave. North Miami Beach, l Tel: (30) jgarcia.pe@outlook.com LA. P.E. Licence No. 7846

3 JOB No.: S-2 O 1 S PROPOSED PLANS OR: DAVEY RESIDENCE JENSEN BEACH, LORIDA N.E. 4th. Ave. North Miami Beach, l Tel: (30) jgarcia.pe@outlook.com LA. P.E. Licence No. 7846

4 JOB No.: S-3 O 1 S PROPOSED PLANS OR: DAVEY RESIDENCE JENSEN BEACH, LORIDA N.E. 4th. Ave. North Miami Beach, l Tel: (30) jgarcia.pe@outlook.com LA. P.E. Licence No. 7846

5 SERIES 100 RACKING SYSTEM TYPICAL ROO LAYOUT - STANDARD LAG BOLT SPEC ASSUMES /16" LAG BOLTS WITH 2." EMBEDMENT IN ROO STRUCTURAL MEMBERS/RATERS - TORQUE ALL 16 " HARDWARE TO THE OLLOWING: - SILVER S.S T-LBS - BLACK S.S. 7-9 T-LBS RAIL CAN MOUNT TO EITHER SIDE O POST (UPSLOPE vs. DOWNSLOPE) - OR UNEVEN ROO SURACES, USE UP TO TWO LEVELING SPACERS PER L OOT OR STANDO. SEE DRAWING "STANDARD RAIL LEVELING" OR DETAILS AND LIMITATIONS SERIES 100 ON LASHED L-EET LASHED L-EET ARE OPTIMIZED OR QUICK AND ROBUST INSTALLATION ON STANDARD COMPOSITION SHINGLE ROO SURACES OR OTHER ROO TYPES STANDOS ARE RECOMMENDED ROO RATERS OR STRUCTURAL MEMBERS MODULE MID CLAMPS MODULE OVERHANG (NOT TO EXCEED 30% OR MANUACTURER'S RECOMMENDATIONS) STANDARD RAIL MODULE OVERHANG ROO RATER TYP (ROO ATTACHMENTS SHOULD ALWAYS BE EMBEDDED INTO ROO RATERS OR STRUCTURAL MEMBERS SUCH AS STEEL PURLINS) ROO SHEATHING, UNDERLAYMENT, AND ROOING MATERIAL, TYP. LASHED L-OOT S100 D SERIES 100 TYPICAL LAYOUT 77 IERO LANE, SUITE 200 SAN LUIS OBISPO, CA USA PHONE (80) AX (80) THE INORMATION IN THIS DRAWING IS CONIDENTIAL AND PROPRIETARY. ANY REPRODUCTION, DISCLOSURE, OR USE THEREO IS PROHIBITED WITHOUT THE WRITTEN CONSENT O DRATER: SERIES 100 OVERVIEW, ON LASHED L-EET S100 D01 SERIES 100 RACKING SYSTEM SHOWN MOUNTED ON STANDOS WITH TOP MOUNT END CLAMP MID CLAMP ASSEMBLY 12/02/1 RAIL STANDARD STANDARD RAIL SPLICE INSERT STANDARD RAIL SPLICE BASE STANDO CLAMP CHANNEL NUTS - STANDARD LAG BOLT SPEC ASSUMES /16" LAG BOLTS WITH 2." EMBEDMENT IN ROO STRUCTURAL MEMBERS/RATERS - TORQUE ALL 16 " HARDWARE TO THE OLLOWING: - SILVER S.S T-LBS - BLACK S.S. 7-9 T-LBS RAIL CAN MOUNT TO EITHER SIDE O POST (UPSLOPE vs. DOWNSLOPE) - OR UNEVEN ROO SURACES, USE UP TO TWO LEVELING SPACERS PER L OOT OR STANDO. SEE DRAWING "STANDARD RAIL LEVELING" OR DETAILS AND LIMITATIONS GAP RAILS 0.1"-0.1" OR THERMAL EXPANSION AT SPLICES RUBBER RAIN COLLAR 16" LAG BOLT WITH WASHER STANDO SHAT (VARIOUS SIZES) CENTER SPLICE ON RAIL GAP 1/4" ASSEMBLED SYSTEM (SOLAR MODUELS NOT SHOWN) STANDO BASE STANDARD 1-HOLE SYSTEM SHOWN WITH STANDO MOUNTING COMPATIBLE WITH ALL ROO TYPES USE LASHED L OOT OR ASTER INSTALLATION ON COMPOSITION SHINGLE ROOS 77 IERO LANE, SUITE 200 SAN LUIS OBISPO, CA USA PHONE (80) AX (80) THE INORMATION IN THIS DRAWING IS CONIDENTIAL AND PROPRIETARY. ANY REPRODUCTION, DISCLOSURE, OR USE THEREO IS PROHIBITED WITHOUT THE WRITTEN CONSENT O G.McPheeters DRATER: D.Ryan G.McPheeters S100 D04 12/02/1 STANDARD RAIL SERIES 100 TILT KITS 0-1 DEG 12/02/1 - LAG BOLTS MUST EMBED IN ROO STRUCTURAL MEMBERS/RATERS - TORQUE ALL 16" HARDWARE TO THE OLLOWING: - SILVER S.S T-LBS - BLACK S.S. 7-9 T-LBS CHANNEL NUT STANDO CLAMP - RAILS CAN MOUNT TO EITHER SIDE O POST (UPSLOPE VS. DOWNSLOPE) RUBBER RAIN COLLAR INSTALLS OVER TOP O LASHING - RAILS CAN BE LEVELED UP TO 3" USING UP TO TWO LEVELING SPACERS AS SHOWN IN DRAWING S100 D07 "SERIES 100 HD STANDO LEVELING" STANDO SHAT HD (VARIOUS SIZES INCLUDING 7, 9., 12, AND 18" SHATS) 16" LAG SCREW IS TYPICAL OR SECURING STANDO BASE TO ROO RATER, 2." MIN EMBEDMENT INTO RATER TYP. STANDO BASE HD, 6-HOLE LASH POST WITH STANDARD GALVANIZED STEEL OR DEAD SOT ALUMINUM ROO LASHING OR 1" DIAMETER VENT PIPE. A POURED SEALANT-STYLE LASHING MAY BE USED WITH STANDOS AS AN ALTERNATIVE TO A TYPICAL CONE LASHING WHEN INSTALLED PER MANUACTURER'S INSTRUCTIONS ON LOW-SLOPE ROO SURACES OAM INSULATION, TYP. JENSEN BEACH, LORIDA DRATER: THE INORMATION IN THIS DRAWING IS CONIDENTIAL AND PROPRIETARY. ANY REPRODUCTION, DISCLOSURE, OR USE THEREO IS PROHIBITED WITHOUT THE WRITTEN CONSENT O PROPOSED PLANS OR: DAVEY RESIDENCE 77 IERO LANE, SUITE 200 SAN LUIS OBISPO, CA USA PHONE (80) AX (80) "RAIL END OVERHANG" (NOT TO EXCEED 34% O ACCEPTABLE RAIL SPAN) N.E. 4th. Ave. North Miami Beach, l Tel: (30) jgarcia.pe@outlook.com LA. P.E. Licence No "RAIL SPAN" DISTANCE BETWEEN ROO ATTACHMENTS SEAL PENETRATION AND UNDER BASE WITH APPROPRIATE ROO SEALANT I 2 LAG SCREWS ARE USED, LOCATE SCREWS IN OPPOSITE CENTER HOLES ON BASE ROO RATER OR STRUCTURAL MEMBER ROO DECKING TYP. HD STANDOS ARE OTEN USED WITH OAM ROO INSULATION STANDO MOUNTING POINT OR USE ON ALL ROO SURACES 77 IERO LANE, SUITE 200 SAN LUIS OBISPO, CA USA PHONE (80) AX (80) THE INORMATION IN THIS DRAWING IS CONIDENTIAL AND PROPRIETARY. ANY REPRODUCTION, DISCLOSURE, OR USE THEREO IS PROHIBITED WITHOUT THE WRITTEN CONSENT O DRATER: DRAWN : JG S100 PEN D08 12/02/1 PEN DETAIL 08, HD STANDO JOB No.: S-4 O 1 S