Facade Scaffolding UNI 70/100

Transcription

1 valid fro Stark gerüstet. Facade Scaffolding 70/100 s English

2 2 Contents Contents Mission stateent Benefits of the syste 2-3 Benefits of the syste 4-5 Fraes 6-7 Decks 8 Decks I Scaffold access - inside 9 Stairs I Accessories for stairs 10 Gap covers Base jacks Base plates 13 Diagonal braces Side guards 14 Toe boards 15 Side guards Scaffold end 16 Upper scaffold guard rails Deck fastening Roof guard 19 Brackets Transos Anchoring 25 Couplers 26 Mobile towers Single parts 27 Scaffold pallets 28 Protective equipent Scaffold exaples Notes Fax order for 39 MJ-Gerüst external warehouses in Gerany Backpage s arked with an asterisk are net prices. Discounts / deductions cannot be granted for these prices. All prices exclude VAT applicable at the tie of shipent. All diensions and weights are non-binding approxiate values. Technical data is subject to change without prior notice. s are charged as applicable on the day of shipent. Sale is subject exclusively to our sales ters and delivery conditions. In brief: Place of business and jurisdiction is Plettenberg. Extended reservation of property rights until full payent of all our outstanding accounts receivables. Our prices are ex works. UEG Union EUropäischEr GErüstbaUbEtriEbE GASTMITGLIED MITGLIEDSBETRIEB

3 3 MJ 70/100: easy - fast - safe The facade scaffolding syste MJ 70/100 has been technically approved by the Deutsches Institut für Bautechnik Berlin (Geran Institute of Building Technology) under the approval nubers Z * (MJ 70) and Z * (MJ 100). The high quality of this syste is based on the optial ergonoic construction, the durability of the aterials and the assebly logic that virtually rules out any assebly errors. The key features of the syste are the round deck connection boults and the toggle pins. The individual scaffold bays are connected by decks which are placed on the round bolts of the vertical fraes so that the syste can be erected in virtually no tie. This also rules out the risk of the decks slipping. The swivel pins in the vertical fraes are used to fasten guardrails and diagonal braces without the use of tools. In its standard design, the " MJ-Gerüst 70" scaffold syste can be used as a scaffold syste of scaffold group 3 according to DIN :1990 and as guard and roof guard scaffold. The "MJ 100" scaffold syste can be used, depending on bay width, for load classes 4-6 for scaffolding according to DIN EN :2004. The use of a roof guard is accounted for in the standard design. With extensive and functionally aligned accessories, the syste is able to achieve a degree of flexibility that also enables scaffolding for challenging objects. Efficient due to optiised ease of assebly Cost-effective due to long service life and excellent intrinsic value Safe through certified quality anageent Flexible through our extensive range of coponents Strong up to 6 kn/ 2 full surface, up to 10 kn/ 2 as partial surface load* MJ-Gerüst top-quality scaffolding "Made in Plettenberg" MJ-Gerüst GbH, with its head office in Plettenberg in the Geran province of Sauerland, is part of a strong group of copanies that looks back on 50 years of copany history. The core copetence of the faily business lies in the production and worldwide sale of high-quality scaffolding systes ade of steel or aluiniu that offer virtually infinite possibilities in ters of odern syste scaffolding. Reasons for you to becoe our partner: We anufacture our products in Gerany. We are DIN EN 9001, and certified. We ensure the very highest product quality with dynaic quality anageent. Due to our extensive storage capacities and short decision-aking paths, we ensure short-ter aterial availability. We support you with your projects as early as the planning phase. We ensure global on-tie shipent. *Further details can be found in the approval letters and certifications which we would be pleased to send to you upon request.

4 4

5 Set up adjustable base jacks, place lower diagonal fasteners, ounting guard rails (only in the diagonal field). Mount vertical fraes. Mount diagonal brace on toggle pins Mount decks, align perpendicularly to guard rail and frae with water level. Mount inside access deck. Asseble vertical fraes and decks of the next level, then ount diagonal braces, guard rails and toe boards. Essential benefits of the 70/100 syste at a glance: Horizontal bracing with round bolt deck arresting Short assebly ties without the use of any additional tools due to odular structure High safety features: Decks are firly locked to the vertical fraes. Inherent and vertical oving loads are discharged directly by the decks lying on the vertical fraes. Independent perpendicular adjustent through fixed knot connections: After initial alignent of the lowest levels, the alignent of all further scaffold levels takes place autoatically. Coplete usability of the working width due to outside diagonal braces Decks ade of tiber, steel and aluinu

6 6 Fraes VERTICAL FRAME STEEL Steel tube Ø 48.3, hot dip galvanized, with round bolts for safe ounting of the scaffolding floors. Steel tubes perforated for securing options by security pins, self-locking swivel pins for ounting back guardrails and diagonal braces.the assebly frae 100 eets the requireents of width class A/F 09 and is designed for highly loaded scaffoldings up to load class 6. PU: 25 pieces (height ) 50 pieces (height ) Height Width * board * Wall thickness 3.2 INDIVIDUAL NEEDLE EMBOSSING 3.90 VERTICAL FRAME STEEL as before, but with 4 inside swivel pins PU: 25 pieces * * Wall thickness 3.2 VERTICAL FRAME ALU Aluinu tube Ø 48.3 x 4.0, otherwise like the steel frae. PU: 25 pieces (height ) 50 pieces (height )

7 Fraes 7 SIDE BRACKET FRAME Steel tube Ø 48.3, hot dip galvanized. For retrofitting roof overhangs and building protrusions. PU: 25 pieces Height Width FALL ARREST FRAME Steel tube Ø 48.3, hot dip galvanized. For expanding the 70 scaffold by one board width. Particularly suitable for the erection of roof guard scaffolds as per DIN Option of using as an adaptor frae when converting fro 70 to 100. PU: 25 pieces / CONVERSION FRAME Steel tube Ø 48.3, hot dip galvanized. Enables conversion fro a 1-board scaffold frae into a 70 (2 boards) scaffold. PU: 25 pieces (only with height 2.00 ) / WALK-TROUGH FRAME TRUSS BEAM Steel tube Ø 48.3, hot dip galvanized, with tube connector. Wide passageway for pedestrians and pedestrian protection in the lowest scaffold level. 4-board board WALK-TROUGH FRAME STANDARD Steel tube Ø 48.3, hot dip galvanized, each with 2 achine screws fitting the walk-through frae truss bea

8 8 Decks TIMBER DECK with galvanized deck caps, 48 thick, can be used on both sides, echanically checked in accordance with DIN EN and DIN 4074 MS 10/13, waterproofed and weatherproof. Can be used in guard and roof guard scaffolds as per DIN 4420 up to L PU: 60/80 pieces Load class Length Width STEEL DECK Hot dip galvanized, perforated, non-slip surface, easy to stack, with handles for length 2.50 PU: 60/80 pieces STEEL DECK OPTI-LINE Soe as above, but by optiizing the running profile and by using high quality steel, up to 3.40 kg lighter with the sae load class. PU: 60/80 pieces ALU DECK Can be used on both sides and has non-slip surface, box profile with 5 bearing longitudinal bars, very robust high-capacity odel. PU: 60 pieces CORNER DECK 0.32 and 0.64 * Hot dip galvanized, non-slip deck with deck fastening, as an addition to syste decks in the inner corner area, in conjunction with corner bracket, see page DECK CONNECTOR Steel, hot-dip galvanised, for connecting 2 aluinu decks, only required for 4.00 aluinu decks. DECK FASTENING FOR CORNER DECK* hot-dip galvanised A/F A/F *Approval procedure not yet copleted

9 Decks I Scaffold access -inside- 9 Load class Length Width ALU DECK WITH STEEL SHOE -CONNECT non-slip surface and easy to stack, optiised ratio of weight and load capacity due to coputeraided profile optiisation, steel shoes, thus robust and durable. Patented bea reinforceents in the running profile for inial throughput deflection and best possible slip resistance. PU: 18 pieces NEW INDIVIDUAL NEEDLE EMBOSSING 3.90 PLYWOOD ACCESS DECK + ALU LADDER with water resistant surface, non-slip and lightweight veneer panels of 12, type BFU 100 G-12. PU: 14 pieces New and iproved odel! INDIVIDUAL NEEDLE EMBOSSING 3.90 ALU ACCESS DECK + ALU LADDER with non-slip aluinu deck, weather resistant, lightweight and robust, available for 2.00 lengths with telescopic ALU ladder, access flap ade of corrugated sheet etal. PU: 14 pieces Stable flap! INDIVIDUAL NEEDLE EMBOSSING 3.90

10 10 Stairs Accessories for stairs ALUMINUM STAIRS WITH PLATFORM for bay height 2.00 and 1.00, scaffold stairway for the planned construction with facade scaffolding for quick and safe ounting of the levels. The steps are designed in a non-slip anner and allow cofortable Bay outside access for extensive use Initial stairs of scaffold and when transporting 1.00 bulky aterial, without reducing the work surface in the ain walkway. - Evenly distributed line load p=2.5 kn/ 2 - Single load distributed on 0.2 x F=1.5 kn - Meets the requireents according to DIN EN PU: 10 pieces Decking transo for start of stairs, see page 23. Length Width OUTSIDE STAIRCASE HANDRAIL Steel, hot dip galvanized, for ALU platfor stairs. PU: 40 pieces INSIDE STAIRCASE HANDRAIL Steel, hot dip galvanized, for ALU platfor stairs. PU: 20 pieces STAIR GUARD RAIL Steel, hot dip galvanized, for ALU stair with landing 1,00. Bay A/F A/F ROUND INSIDE GUARD RAIL Steel, hot-dip galvanized. For ounting to the stair string. A/F ACCESS LADDER ALUMINUM as a separate ladder for the inside scaffold clibing, with riveted steel claws for safe attachent to the access decks ACCESS LADDER STEEL Hot dip galvanized, as a separate ladder for the inside scaffold clibing, with hook for safe ounting to the access decks. PU: 80 pieces SQUARE PLUG BLACK for ALU Access Ladder steel ALU ACCESS LADDER 1.00 Steel, hot-dip galvanized, with UN-suspension. Enables easy entry into the scaffolding, with a field height of /

11 Gap covers 11 STEP ACCESS PLATFORM BRACKET to set up a stairway in front of a scaffold bay. Length Width GAP COVER* Steel, hot dip galvanized, non-slip deck, varied use, for bridging gaps up to 0.25 wide, quick assebly due to wedge lock fastening GUARDRAIL BRACKET FOR PLATFORM STAIRS* A/F POLYGON COVERAGE 2-BOARD Steel, hot dip galvanized, non-slip deck with deck fastening for continuous construction of round scaffolding fro 0 to *Approval procedure not yet copleted DISTANCE COUPLER Steel tube Ø 48.3 with two welded couplers, galvanized. Can be used, for exaple, as a connection (without a gap) between facade scaffolding and an outside stairway. Inside icroeter Inside icroeter Inside icroeter

12 12 Gap covers Load class Length Width GAP CLOSER ALU* with coposite cap. To close the gap between ain bay and console decks. CAUTION the deck has to be secured against tilting/lifting. Fitting deck fastener: please see Page 18. NEW LOCK AGAINST LIFT-OFF* Steel, hot dip galvanized to secure decks against lifting. A/F *Approval procedure not yet copleted

13 Base jacks Base plates 13 Length BASE JACK Steel, hot dip galvanized, for adjusting level with differences in height of the ground, with tube jack, base plate 150 x 150, knurled nut with collar for centring the shaft on the jack, lock to prevent unscrewing of the knurled nut and to ensure the necessary bridging length, can also be used as a head jack. PU: PU: PU: PU: PU: SWIVEL BASE JACK with swivelling base plate, 150 x 150 Additional longitudinal scaffold bracing at base required. Perissible load: 25.4 kn PU: BASE SPINDLE SOLID Steel, galvanized, for high perissible loads, with knurled nut, fast action thread, base plate 150 x 150. PU: ADJUSTMENT TUBE Steel, hot dip galvanized, for levelling unequal ground. Use in connection with a decking transo and base jack. Adjustent range 10 x 0.10 = SPINDLE SECURITY Serves for securing spindle feet when oving a scaffold. The attachent to the tube is done with a half coupler PROTECTIVE PAD FOR BASE JACK Plastic, with reflector UNDERLAY WOODS 40 x 240 x / x 240 x /- 10 as a load-distributing support, sawn LOWER DIAGONAL FASTENER For fastening the diagonal braces at ground level. For each diagonal bay, 2 lower diagonal fasteners and 1 back guard rail are required as a horizontal ledger

14 14 Diagonal braces Side guards Length Width DIAGONAL BRACE Steel tube Ø 48.3, hot dip galvanized. The assebly takes place on the outside of the scaffold using the upper swivel pin on the vertical frae. Perpendicular scaffolding construction is guaranteed because the diagonal causes autoatic aligngent. Thus a floor-wise alignent is not required. PU: 50 pieces for bay 4.00 for bay 3.00 for bay 2.50 for bay 2.00 for bay DOUBLE END GUARD RAIL Steel tube Ø 33.7, hot dip galvanized. Double side guards at the ends. Connected on one side of the swivel pin and attached to the opposite side. PU: 25 pieces END GUARD RAIL 1-BOARD Steel tube Ø 33.7, hot dipgalvanized. Double side protection on front sides. Can be used for side protection on round scaffolding SINGLE END GUARD RAIL Steel tube Ø 33.7, hot dip galvanized. To be used in pairs as double side guards. PU: 25 pieces BACK GUARD RAIL Steel tube Ø 38 (Ø 42.4 for 4.00 length), hot dip galvanized, pressed and perforated at the ends. Tie-saving attachent using the self-locking swivel pins, thus no tools are required for assebly. PU: 100 pieces

15 Toe boards 15 Length Width TOE BOARD Ipregnated tiber with galvanized fittings, for attaching to the toe board pins of the assebly frae as part of the coplete side guard protection. PU: 80 pieces s for printed toe boards on request. END TOE BOARD Ipregnated tiber with galvanised fittings, for end protection. PU: 100 pieces TOE BOARD Aluinu, galvanized steel fittings, for ounting in the toe board pins of the frae as a coponent of the full, three-part Side protection. PU: 80 pieces

16 16 Side guards Scaffold end INSIDE GUARD RAIL POST WITH TOE BOARD PIN Steel, hot dip galvanized with 2 welded-on swivel pins for attaching additional inside back guard rails to the vertical frae. Quick assebly due to wedge connection. PU: 100 pieces Length Width TOP END GUARD FRAME, STEEL Steel tube Ø 48.3, hot dip galvanized, double side guards and deck fastening for the top scaffold platfor. PU: 25 pieces SINGLE GUARD RAIL POST Steel tube Ø 48.3, hot dip galvanized, for ounting back guard rails on the top scaffold platfor. PU: 50 pieces GUARD RAIL POST as above, with short deck fastening and toe board pin. PU: 50 pieces GUARD RAIL POST WITH TUBE CONNECTOR Steel tube Ø 48.3, hot dip galvanized, with tube connector and short deck fastening with toe board pin. PU: 50 pieces

17 Upper scaffold guard rails 17 GUARD RAIL POST WITH DECK FASTENING Steel tube Ø 48.3, hot dip galvanized, for ounting back guard rail and fastening scaffolding deck to the top scaffold platfor. PU: 50 pieces Length Width GUARD RAIL POST 2.00 Steel tube Ø 48.3, hot dip galvanized, with tube connector and short deck fastening. Its use in guard and roof guard scaffolds is not peritted. PU: 50 pieces PROTECTIVE NET POST Steel tube Ø 48.3, hot dip galvanized, 2.00 high, for securing the decking on the top scaffold platfor and fastening side protective nets. Also suitable for attachent of protective side nets in conjunction with guard rails. Approved for the erection of guard and roof guard scaffolds as per DIN PU: 50 pieces REINFORCEMENT FOR ROOF RAIL Steel, hot-dip galvanized, to reinforce the guard rail for roof rail, at one field length over A/F UPPER DECK FASTENING Steel tube, hot dip galvanized, in conjunction with the guard rail post for fastening the decking on the top scaffold platfor. PU: 50 pieces

18 18 Upper scaffold guard rails PROTECTION FENCE Hot dip galvanized for protection of roofers. Replaces three-part side guard as per DIN Assebly side by side and/or one on top of the other. Length Width WEATHER PROTECTION POST Steel, hot dip galvanized, with 3 swivel pins for fastening tarpaulins and tarp battens (back guard rails), (see page 14) and with connecting piece for guard rail posts Scaffold protection tarp, see price list "Universal Accessories" RAIN CANOPY BRACKET TWO-PIECE SET* Steel, hot dip galvanized. For use with frae width 0.74 in the top scaffold platfor. In conjunction with guard rails and tarps, this coponent provides weather protection *Approval procedure not yet copleted

19 Deck fastening Roof guard 19 BRACKET FASTENER Steel, hot dip galvanized. Enables varied ounting of brackets in building niches. Can be used with wooden and steel floors. Length Width ROOF GUARD EXTENSION Steel, hot dip galvanized. For erecting a roof guard as per DIN To be used with deck fastening in conjunction with bracket 0.64 or bracket DECK FASTENING Steel, hot dip galvanized, suitable for roof guard extensions DECK FASTENING WITH WEDGE Steel, hot dip galvanized. To prevent decks fro lifting off BRACKET DECK FASTENING Steel, hot dip galvanized. To prevent decks fro lifting off

20 20 Brackets BRACKET 0.32 up to scaffold class 3 with tube connector for ounting guard rail post, steel, hot dip galvanized, with welded half coupler, used to extend the scaffold on the inside or outside by one 32 c wide syste deck. PU: 25 pieces Width BRACKET 0.32 up to scaffold class 3. Soe as above, but without tube connector, easy to use together with a deck plank fastener. PU: 100 pieces BRACKET 0.64 with tube connector, steel, hot dip galvanized, with welded half coupler. Used to extend the scaffold on the inside or outside by two syste decks and to extend the ends. PU: 20 pieces BRACKET 0.64 Soe as above, but without tube connector. PU: 20 pieces

21 Brackets 21 Width BRACKET 0.74 Steel, hot dip galvanized. Used to ake scaffold lift adaptations of one 70 vertical frae width. Unlike 0.64, the adaptation is not only possible at deck height, but can be ade at any required height. Used to extend the scaffold by two syste decks and for erecting guard and roof guard scaffolds. PU: 20 pieces BRACKET 0.96 Steel, hot-dip galvanized, with welded half coupler, used to extend the scaffold on the inside or outside by three syste decks and to extend the ends, additional support through cross diagonals, bracket load class 3. Stability of the supporting structure ust be verified in each individual case. PU: 20 pieces BRACKET 1.10 Soe as above, but for 100 vertical frae, additional support required through cross diagonals, bracket load class 3. Stability of the supporting structure ust be verified in each individual case. PU: 20 pieces

22 22 Brackets SYSTEM GRID BRACKET 0.50 with half coupler, steel, hot dip galvanised, used to expand or shorten scaffold bays. PU: 20 pieces Length Width CORNER BRACKET WITHOUT TUBE CONNECTOR* Steel, hot dip galvanized. A welded half coupler at a staggered height enables 2 brackets to be connected to one stand pipe. PU: 20 pieces ROOFER BRACKET eets different requireents for ergonoic workplaces for painters and tinsiths, not to be used as a roof guard scaffold, for use up to load class 3. PU: 12 pieces T-DECKING FASTENER coated, signal red RAL As a safe guard against taking off COTTER PIN for fixing the T-deck fastener CROSS DIAGONAL Steel, hot dip galvanized, with two half couplers for bracing 2-board vertical frae perpendicular to the facade and for supporting 2-board brackets. CROSS DIAGONAL Soe as above, but for bracing 3-board vertical frae perpendicular to the facade and for supporting 3-board brackets *Approval procedure not yet copleted

23 Transos 23 TRANSOM Steel, hot dip galvanized, adjustable height for interediate levels in the vertical frae. When using bridging beas, the syste deck is ounted by using transos. Length Width PLATFORM TRANSOM Steel, hot dip galvanized, soe as before, but designed for building a continuous platfor level between the scaffolds STARTING TRANSOM Steel, hot dip galvanized, for fixing decks or staircases just above ground level. May also be used in conjunction with adjustent tubes HANGING TRANSOM Steel, hot dip galvanized, for cantilevered end elevations and/or for bridging up to a 6.00 span. Use in conjunction with diagonal braces and couplers with swivel pin DECK TRANSOM FOR LATTICE BEAMS Steel, hot dip galvanized. Is fixed on the upper flange of the lattice beas to enable the creation of level work surfaces with standard decks. 2-board board board board board board board

24 24 Transos CONVERSION TRANSOM Steel, hot dip galvanized. With this transo, conversion fro 100 to 70 can be easily achieved. Width DECK LEDGER FOR LATTICE BEAMS Steel, hot dip galvanized, for ounting a vertical frae and floor in conjunction with universal lattice beas, for exaple, for bridging. The lattice beas are arranged on the outside of the frae. The ledger can be slid into position fro its secured place by eans of the deck LATTICE BEAM BASE PLATE Steel, hot dip galvanized, use in connection with a decking transo, for further extensions of scaffold pattern when bridging with lattice beas, ovable

25 Anchoring 25 PU Length WALL TIE Steel tube Ø 48.3, hot dip galvanized. Installation as short scaffold tie with one standard coupler, as long scaffold tie with two standard couplers WALL TIE* Steel tube Ø 48.3, hot dip galvanized. Hook is welded at the inside of the tube for ideal connection of the couplers ANCHOR BRIDGE WDVS Set with WDVS bridge and two eye bolts for the anchoring of scaffolding to house walls, especially for WDVS. Even with a lever ar of 28 c a sufficient load capacity is guaranteed parallel to the house wall WDVS = Theral insulation coposite syste EYE BOLT Galvanized and welded, Ø 12, for expansion plug EXPANSION PLUG for eye bolts with a tiber thread Ø 12 for drilling Ø PLASTIC CAP for closing anchor drill holes. nature black SECURITY PIN For securing the scaffold joints against unintentional lift-off, for exaple, when oving scaffold units with a crane or in special wind conditions, Ø *Approval procedure not yet copleted

26 26 Couplers STANDARD COUPLER Robust odel, steel, drop-forged, hot dip galvanized, for right-angled connection of tubes of Ø 48.3, class BB, EN 74-1 RA BB C3 M, to be used in the classes B and BB of the steel and aluinu tube. Alternatively, with quick release thread* according to the general building approval. PU: 25 pieces A/F A/F with quick release thread A/F 22* A/F 19* Standard thread Quick release thread A/F A/F SWIVEL COUPLER Heavy-duty steel odel, drop-forged, hot dip galvanized, for any angular connection of tubes of Ø 48.3, class B, EN 74-1 SW B C3 M, to be used in class B of the steel and aluinu tube. Alternatively, with quick release thread* according to the general building approval. PU: 25 pieces with quick release thread A/F 22* A/F 19* SWIVEL PIN COUPLER Drop-forged steel, hot dip galvanized, half coupler with collar nut 19 or 22 A/F and welded swivel pin. A/F A/F with quick release thread A/F 22* A/F 19* BASIC COUPLER T-carrier plate with two parallel welded half couplers to bear vertical loads of scaffold constructions, to be ounted directly on the facade, basic structural analysis available. Extensive lattice bea constructions are no longer necessary. A/F A/F BASIC COUPLER ADJUSTABLE as above but adjustable for wall distances fro , with 4 ounting holes. SW NEW Special couplers, see price list Universal Accessories *Approval procedure not yet copleted

27 Mobile towers I Single parts 27 STEEL BEAM 1.70 Steel, hot dip galvanized, suitable for ounting with scaffold parts of 70 as obile scaffold, including 2 eye bolts M 14. Length Width STEEL BEAM 3.00 Steel, hot dip galvanized, suitable for ounting with scaffold parts of 100 as obile scaffold and/or with scaffold parts of 70 and platfor transo 1.10 as obile ceiling scaffold, including 2 eye bolts M Installation situation type no.: Installation situation type no.: CASTOR WITH SPINDLE Bearing 10 kn with central load distribution, castor Ø 200 ade of polyaide with run stop, levelling through adjustable steel spindle. DIN applies if scaffolding is ade to be obile. A standard proof of stability is required for this obile scaffolding. PU: 100 pieces

28 28 Scaffold pallets SCAFFOLD PALLET FOR VERTICAL FRAME Steel tube, hot-dip galvanized, continuous fork ount for safe fork-lift transport. Additional cut-outs allow side retracting. PU: 5 pieces Length Width UN/UC UN/UC New Model! STACKING PALLET FOR TUBES Steel tube, hot-dip galvanized. Specially suited for odule scaffolds, standards, ledgers, guard rails, diagonal braces, tubes and toe boards. Open all round, suited for stacked and crane transports. The tubular supports are reovable and are to be stowed securely in the base frae so that epty pallets can be transported and stacked in a very space-saving anner. PU: 5 pieces Special orders on request! PALLET FOR TUBES Steel, hot-dip galvanized, robust odel, cannot be disantled, with crane lugs STACK PALETTE Steel, hot-dip galvanized. Can be cobined with grid boxes and pickup for crane hook NEW INDUSTRIAL LATTICE BOX with wooden deck. On a side with half flap. Fill height Fill height Fill height PACKAGING TAPE painted with zinc dust, 0.5 x 16 (as a ring). STRAPPING TOOL FOR PACKAGING TAPE , DISPENSER FOR STEEL STRIP

29 FALLSTOP SET SCAFFOLDING 1 including: HARNESS STRIPE BASIC CLICK LIGHT with vain protection. COMFORT SCHOULDER PAD BACK EYE EXTENSION TIE 50 -CONNECT Protective Equipent * 29 FLEX SHOCK ABSORBER elastic webbing with safety and tube hooks DEVICE BAG size 3 FALLSTOP SET SCAFFOLDING 2 including: * HARNESS STRIPE BASIC CLICK LIGHT with vain protection. COMFORT SCHOULDER PAD BACK EYE EXTENSION TIE 50 SELF-WINDING BELT SHOCK ABSORBER with belt tensioner RETRAK 2.00 DEVICE BAG size 4 EC-type exaination certificate For the safety syste, there is an EC-type exaination certificate issued by the Geran Social Accident Insurance (DGUV), expert coittee PPE. Insurance Association for occupational health checks *Net prices

30 30 -CONNECT Protective Equipent HARNESS STRIPE BASIC CLICK Universal harness for all application situations. Special desined for needs of handcraft and scaffolding in accordance with EN * FLEX STRETCH STOP SHOCK Elastic webbing with securing hooks and Pipe hook 2A / * SHOULDERPAD COMFORT BLACK The schoulderpad protects against thefriction of the shoulderstrape on the skin. His fastened by a hook and loop fastener unter the straps. black * BACK EYELET EXTENSION TIE Secure with the back eyelet of the safety harness this extension provides scaffolding builders extention when working on scaffolding. To secure an easy attachibng of the safety device. With industrial license. 50 c * 80 c * CARABINER HOOK HEART LIGHT With TL-Plus closure, ALU anodised. The special heart shape prevents the slippage of the Carabiner hook. Opening diaeter: * HAMMER AND RATCHET CARRIER left slanted * right slanted * BELT STORAGE BAG Bag for storage and transport of a safety harness with absorbing connecting Lanyard. Adjustable shoulder straps. Recoended load up to ca. 5 kg. Colour: black * ANCHORAGE PROTECTION SET LORY Copact rescue set especially for scaffolding assebly. The lifting function akes it possible to rescue the fallen person and evacuate hi/her to the next scaffolding level as well as a rescue abseilling downwords * * *Net prices

31 SF PREMIUM SET "MILLER" including: SAFETY HARNESS REVOLUTION R2 SCAF with front an back stopper loop, sharp-edge tested back loop extensions, quick adjustent, autoatic closures, cofort back pads, belt-end clips, elastic duraflex belt band, swivel connection, EN CONNECT Protective Equipent S-M * L-XL * 31 FIXING MEANS WITH STRAP FALL ATTENUARTOR Length 2.00, sharp-edge tested, horitzontally approved (stopping point at base height), 63 scaffold hook, flexible design for added oveent, safety clip to fasten safety harness, teflon-coated for longer service life, EN 354 and EN 355. EQUIPMENT BAG 0.27 x 0.50 (D x L), ade of PVC, red. WARN VEST NEON YELLOW 2 reflective strips surrounding (according to DIN). Regulation of the width by Velcro strips in front. Packed in a handy bag * SCAFFOLDING POUCH PREMIUM (L) PVC-hard foil, DIN A5 high, with two etal eyes up / down and clear slot-in-sleeve for classification of the scaffold on site * SCAFFOLDING POUCH STANDARD (R) PVC-soft foil, DIN A5 high, with a perforation up/down and clear slot-in-sleeve for classification of the scaffold on site * FORM BLOCK, DIN A4 Triple carbon copies, 25 records per block, for ounting the scaffold signs and classification of the scaffold on site * EXPERT TEST of personal protective equipent according to BGG 906 (principle of the Geran Eployers Liability Insurance Association for occupational health checks) * *Net prices

32 32 Protective Equipent UVEX PROTECTIVE HELMET ALPINE For height work and rescue Tested and arked according to EN 397 (industrial protection helets) and EN (Mountaineering helets). white * red * yellow * orange * green * blue * black * UVEX PROTECTIVE HELMET PHEOS S-KR Tested and approved According to EN 397 with 4-point chin straps According to EN 397 pre assebled on the helet. white * black * yellow * blue * KASK INDUSTRIAL CLIMBING HELMET PLASMA Q Tested and approved acc. EN 397. With chin strap. Adjusting wheels allow one quick and easy adjustent to the right size. With ring for attaching the helet to a belt. white * yellow * orange * red * green * dark green * royal blue * black * KASK INDUSTRIAL CLIMBING HELMET ZENITH Tested and approved acc. EN 397 and EN Various settings allow a quick and easy adjust. With ring for attaching the helet to a belt. blue * white * yellow * orange * red * green * black * *Net prices

33 70 Scaffold exaples 33 Scaffold bay length 2.50 Scaffold length () x Working height () Working surface List price x x x x x BASIC EQUIPMENT -70 vertical frae steel 2.00 x Tiber deck 2.50 x Diagonal brace for bay Back guard rail Toe board End toe board Double end guard rail Guardrail post with deck fastening 1.00 x Top end guard frae Lower diagonal fastener Base jack 0, Total price in 41, , , , , Total weight (kg) 11, , , , , per 2 in ANCHORING Wall tie Standard coupler with collar nut A/F Expansion plug Eye bolt 12 x Total price in Total weight (kg) , ADDITIONAL EQUIPMENT Extra charge access hatches (plywood) * Total price in Extra charge access hatches (aluinu) * Total price in Extra charge cobi decks (aluinu) *1) Total price in , , , , , Extra charge steel deck Optiline instead of wood Total price in , , , Extra charge vertical fraes (aluinu) instead of steel Total price in , , , * when using 4 access-decks instead of 8 wooden decks. *1) when using cobi decks instead of wooden decks.

34 34 70 Scaffold exaples Scaffold bay length 3.00 Scaffold length () x Working height () Working surface Artikel-Nr. Listenpreis x , x x x x BASIC EQUIPMENT -70 vertical frae steel 2.00 x , Tiber deck 3.00 x , Diagonal brace for bay , Back guardrail , Toe board , End toe board , Double end guardrail , Guardrail post with deck fastening 1.00 x , Top end guard frae , Lower diagonal fastener , Base jack , Total price in , , , , ,90 Total weight (kg) , , , , ,10 per 2 in 36,62 37,39 38,13 40,37 43,90 ANCHORING Wall tie , Standard coupler with collar nut A/F , Expansion plug , Eye bolt 12 x , Total price in 619,20 344,00 223,60 137,60 103,20 Total weight (kg) 98,35 54,64 35,52 21,86 16,39 ADDITIONAL EQUIPMENT Extra charge access hatches (plywood) * ,50 Total price in 790,00 790,00 790,00 790,00 790,00 Extra charge access hatches (aluinu) * ,00 Total price in 880,00 880,00 880,00 880,00 880,00 Extra charge cobi decks (aluinu) *1) ,00 Total price in 9.180, , , , ,00 Extra charge steel deck Optiline instead of wood ,30 Total price in 2.692, ,60 871,20 475,20 316,80 Extra charge vertical fraes (aluinu) instead of steel ,00 Total price in 4.692, , ,00 828,00 552,00 * when using 4 access-decks instead of 8 wooden decks. *1) when using cobi decks instead of wooden decks.

35 100 Scaffold exaples 35 Scaffold bay length 2.50 Scaffold length () x Working height () Working surface List price 100,00 x 10, ,00 x 10, ,00 x 10, ,00 x 10, ,00 x 10, BASIC EQUIPMENT -100 vertical frae steel 2.00 x Tiber deck 2.50 x Diagonal brace for bay Back guardrail Toe board End toe board Double end guardrail Guardrail post with deck fastening 1.00 x Double end guardrail frae Lower diagonal fastener Base jack Total price in 54, , , , , Total weight (kg) 15, , , , , per 2 in ANCHORING Wall tie Standard coupler with collar nut A/F Expansion plug Eye bolt 12 x Total price in Total weight (kg) ADDITIONAL EQUIPMENT Extra charge access hatches (plywood) * Total price in Extra charge access hatches (aluinu) * Total price in Extra charge aluinu floor instead of wood Total price in , , , , , Extra charge steel deck Optiline instead of wood Total price in , , * when using 4 access-decks instead of 8 wooden decks.

36 36 Notes

37 Notes 37

38 38 Notes

39 Fax order for 39 MJ-Gerüst GbH Ziegelstraße 68 I Plettenberg Telephone: info@j-geruest.de I Copany: City / Date Order no. Nae of buyer Contact Custoer no. (if applicable) Order Inquiry Product description no. Quantity Unit price / E Total value / E All prices exclude VAT applicable at the tie of shipent. All diensions and weights are non-binding approxiate values. Technical data is subject to change without prior notice. s are charged as applicable on the day of shipent. Sale is subject exclusively to our sales ters and delivery conditions. In brief: Place of business and jurisdiction is Plettenberg. Extended reservation of property rights until full payent of all our outstanding accounts are recieved. Our prices are ex works. Order value / E Shipping address: Date of delivery Shipping ethod Ters of delivery Packaging costs Ters of payent Other MJ consultant Custoer signature Copy this for and fax to Executive Board: Gerhard Junior, Rainer Junior I Head Office: Plettenberg I Registration Court: AG Iserlohn HRB 2898 I VAT ID: DE

40 Also in your vicinity Head office / Production site MJ-Gerüst GbH Ziegelstraße Plettenberg Mon Thu: 8:00 a.. 4:30 p.. Fri: 8:00 a.. 4:00 p.. Tel.: MJ-Warehouse Eberswalde Poratzstraße Eberswalde Nov Feb: 7:30 a.. 3:30 p.. Mar Oct: 7:00 a.. 4:00 p.. Tel.: MJ-Warehouse Burgenlandkreis on the grounds of Rainer Deike Beuditzer Berg Nauburg - Meyhen Mon Fri: 8:00 a.. 5:00 p.. Tel.: MJ-Warehouse Haburg on the grounds of Richard Dubiec Gerüstbau GbH Liebigstraße Haburg Mon Fri: 8:00 a.. 6:00 p.. Tel.: MJ-Warehouse Berlin on the grounds of Menke Gerüstbau GbH Roedernallee Berlin Mon Fri: 7:00 a.. 3:00 p.. Tel.: MJ-Warehouse Cologne on the grounds of Odendahl + Feldbusch GbH Robert-Bosch-Straße Cologne Mon Fri: 7:00 a.. 5:00 p.. Tel.: MJ-Warehouse Kenzingen on the grounds of Hielsbach Leitern- und Gerüstefabrik GbH Freiburger Straße Kenzingen Mon Thu: 8:00 a.. 5:30 p.. Fri: 8:00 a.. 4:00 p.. Tel.: MJ-Warehouse Raerberg on the grounds of Sebastian Riedl Baugeräte/Schalung Anger 1c Raerberg Mon Fri: 5:30 a.. 5:00 p.. Tel.: MJ-Gerüst GbH 70/100 EN