Facade Scaffolding UNI TOP

Size: px

Start display at page:

Download "Facade Scaffolding UNI TOP"

Marcus Ford
6 years ago
Views:

1 Stark gerüstet. Facade Scaffolding s English valid fro

2 Contents Assebling the syste 2-3 Fraes 4 Decks 5 Scaffold access -inside- 6 Scaffold access -outside- 7 Vertical bracing / Base Jacks 8 Side guards 9 Upper scaffold guard rails / Scaffold extensions Transos 12 Safety roof / Rood boundary scaffolding / Syste bridging / Mobile tower accessories 13 Anchoring / Storage Protective equipent against falling 16 Scaffold exaples Notes Fax order for 21 s arked with an asterisk are net prices. Discounts / deductions cannot be granted for these prices. All prices are excl. of VAT applicable at the tie of shipent. All diensions and weights are non-binding approxiate values. Technical data is subject to change without prior notice. Technical data is subject to change without notice. s are charged as applicable on the day of shipent. Sale is subject exclusively to our sales ters and delivery conditions. In brief: place of business and jurisdiction is Pletteberg. Extended reservation of property rights until full payent of all our outstanding accounts receivables. Our prices are ex works. MITGLIEDSBETRIEB

3 1 Your satisfaction is our success The frae scaffolding syste MJ 65/100 fully coplies with the requireents specified by the governent safety organisation and has been approved by the General Building Authority of the Geran Institute for Structural Engineering (DIBt) in Berlin approval no. Z * for standard odels up to 24 eters. The syste can be assebled in virtually no tie by connecting the individual scaffold bays with decks which are placed on the bolts in the vertical fraes. This also rules out the risk of the decks slipping. This in turn offers scaffolding engineers a high degree of safety. The swivel pins in the vertical fraes are used to fasten guard rails and diagonal braces without the use of tools. The standard scaffolding design can be used according to DIN :1990 for scaffolding groups 1-3 (which correspond to load classes 1-3 under DIN EN ) with lengths l 3.0, and as guard and roof guard scaffolding. In addition, the use of a roof guard is accounted for in this design, in copliance with the Standard. Good reasons for choosing 65/100: Efficiency through quick assebly and disantling High returns through long service life Safe because technicaly approved Z * Flexibility Several bay length available Strong up to 6 kn/2 full surface up to 10 kn/2 as partial surface load With extensive and functionally aligned accessories, the syste is able to achieve a degree of flexibility that also enables scaffolding for difficult objects. MJ-Gerüst top-quality scaffolding Made in Gerany MJ-Gerüst, headquartered in the town of Plettenberg in the Geran province of Sauerland, is part of a strong group of copanies, that looks back on 50 years of copany history. MJ's core copetencies focus on the production and worldwide sale of high-quality scaffolding systes ade of steel or aluiniu that offer virtually infinite possibilities in ters of odern syste scaffolding. Reasons for you to becoe our partner: We anufacture our products in Gerany. We are DIN EN 9001 and certified. MJ-Gerüst GbH based in Plettenberg. Gerany We secure the very highest product quality with dynaic quality anageent. Thanks to our extensive storage capacities and short decision-aking paths we ensure Short-ter aterial availability. We support you with your projects as early as the planning phase. We ensure global on-tie shipent. A copany of the JUNIOR Group *Further details can be found in the approval letters and certifications which we would be pleased to send to you upon request.

2 Assebling the syste * 1 2 3 Set up the base jacks, place base transo, click in guard rails (only in the diagonal field).

Essential benefits of the syste 65/100 at a glance: horizontal bracing with peg-deck arresting short assebly ties without the use of

Own and vertical live loads are directly carried away by the decks located on vertical fraes.

Independent perpendicular adjustent with fixed knot connections.

4 2 Assebling the syste * Set up the base jacks, place base transo, click in guard rails (only in the diagonal field). Mount vertical fraes. Mount diagonal brace via swivel pins. Essential benefits of the syste 65/100 at a glance: horizontal bracing with peg-deck arresting short assebly ties without the use of any additional tools High safety features: Decks are firly arrested to the vertical fraes. Own and vertical live loads are directly carried away by the decks located on vertical fraes. No "tripping hazards on the deck level caused by protruding parts. The vertical fraes are equipped with special "T profiles". Independent perpendicular adjustent with fixed knot connections. After the one-tie adjustent perfored for all further scaffold levels takes place autoatically. valuable work surfaces with outside diagonal braces decks ade of tiber. steel and aluiniu With our extensive range of special coponents. the 65/100 syste can be ipleented very flexibly. One such case is the vertical frae for roof overhangs. with which building protrusions can be converted.

5 3 Assebling the syste * Mount decks, align perpendicularly to guardrail and frae with water level. Mount access deck. Asseble vertical fraes and decks of next level, click in diagonal brace and toeboard. Siple. Fast. Safe. * Please also observe our assebly and user instructions!

4 Fraes Height Width Weight approx. kg VERTICAL FRAME, STEEL Steel tube Ø 48.3 x 2.7, hot-dip galvanised. For joint connection drilled on top and botto, 2-board.

6 4 Fraes Height Width Weight approx. kg VERTICAL FRAME, STEEL Steel tube Ø 48.3 x 2.7, hot-dip galvanised. For joint connection drilled on top and botto, 2-board. PU: 50 pieces (height 0,50-1,00) 25 pieces (height 2,00) 0,50 0,65 8, ,90 1,00 0,65 12, ,90 2,00 0,65 16, ,90 VERTICAL FRAME, ALUMINIUM Aluiniu tube Ø 48.3, Otherwise like the steel frae. PU: 25 pieces 2,00 0,65 9, ,00 VERTICAL FRAME, STEEL as above, but 1-board. PU: 25 pieces 2,00 0,40 16, ,00 VERTICAL ASSEMBLY FRAME, STEEL to retrofit roof overhangs, hot-dip galvanised. PU: 25 pieces 2,00 0,65 20, ,90 VERTICAL FRAME, STEEL Steel tube Ø 48.3, hot-dip galvanised. For joint connection drilled on top and botto, 3-board. PU: 50 pieces (height 0,50-1,00) 25 pieces (height 2,00 ) 0,50 1,00 12, ,00 1,00 1,00 15, ,50 2,00 1,00 22, ,90 WALK-TROUGH FRAME TRUSS BEAM Steel tube Ø 48.3, hot-dip galvanised with tube connector. 4-board 1,35 15, ,50 5-board 1,65 18, ,50 WALK-TROUGH FRAME STANDARD Steel tube Ø 48.3, hot-dip galvanised each with 2 achine screws fitting the walk-through frae truss bea. 2,00 7, ,00

7 5 Decks Load class Length Width Weight approx. kg TIMBER DECK Multi-bloc glued acc. to glue certificate C, 48 thickness. PU: 80 pieces 6 0,65 0,29 5, ,40 6 1,00 0,29 7, ,40 6 1,50 0,29 10, ,00 5 2,00 0,29 14, ,00 4 2,50 0,29 17, ,80 3 3,00 0,29 21, ,80 STEEL DECK Hot-dip galvanised, optiu stackability with selection cross section shape. PU: 80 pieces 6 0,65 0,29 5, ,00 6 1,00 0,29 7, ,00 6 1,50 0,29 11, ,00 6 2,00 0,29 15, ,00 5 2,50 0,29 17, ,00 4 3,00 0,29 21, ,00 ALUMINIUM DECK WITH ALUMINIUM HEAD PIECE Extreely robust design, both sides usable, with high load carrying ability and non-slip surface, inial sagging. PU: 80 pieces 6 1,00 0,29 4, ,40 6 1,50 0,29 5, ,50 6 2,00 0,29 7, ,00 5 2,50 0,29 9, ,00 4 3,00 0,29 11, ,00 3 4,00 0,29 15, ,00 DECK CONNECTOR Steel, hot-dip galvanised, to connect 2 aluiniu decks. Only required with 4 eter decks. 0, ,00 All decks can be used in safety roof and roof boundary scaffolding in line with DIN :

6 Scaffold access -inside- Load class Length Width Weight approx. kg ACCESS DECK WITH ALUMINIUM DECK + ALU- MINIUM LADDER Height ca. 73 with anti-slip aluiniu deck.

8 6 Scaffold access -inside- Load class Length Width Weight approx. kg ACCESS DECK WITH ALUMINIUM DECK + ALU- MINIUM LADDER Height ca. 73 with anti-slip aluiniu deck. Weather resistant, light and robust. Length 2.50, load class 4 (3.00 kn/2) PU: 14 pieces 4 2,50 0,60 21, ,00 3 3,00 0,60 24, ,00 ACCESS LADDER, ALUMINIUM for inside scaffold clibing. 2,16 0,40 3, ,90 ACCESS LADDER, STEEL for inside scaffold clibing. 2,16 0,40 10, ,90

7 Scaffold access -outside- Length Width Weight approx. kg ALUMINIUM STAIRS WITH PLATFORM for hooking in vertical fraes.

The perissible load class for the 2,50 bay size is 150kg/ 2. Teporary staircases are subject to legal regulations.

PU: 10 pieces 3,25 0,55 20,00 000394 391,00 OUTSIDE STAIRCASE HANDRAIL Steel, hot-dip galvanised, for bay 2.50.

PU: 20 pieces A/F 19 2,25 11,50 000425 94,00 A/F 22 2,25 11,50 006942 94,00 DISTANCE COUPLER Steel tube Ø 48.

9 7 Scaffold access -outside- Length Width Weight approx. kg ALUMINIUM STAIRS WITH PLATFORM for hooking in vertical fraes. Cofortable outside access for extensive use of scaffold and when transporting bulky aterial. The perissible load class for the 2,50 bay size is 150kg/ 2. Teporary staircases are subject to legal regulations. If in doubt please check with your custoer. PU: 10 pieces 3,25 0,55 20, ,00 OUTSIDE STAIRCASE HANDRAIL Steel, hot-dip galvanised, for bay PU: 40 pieces 3,45 16, ,00 INSIDE STAIRCASE HANDRAIL Steel staircase handrail for aluiniu stairs. Hot-dip galvanised. PU: 20 pieces A/F 19 2,25 11, ,00 A/F 22 2,25 11, ,00 DISTANCE COUPLER Steel tube Ø 48.3 with two welded couplers, galvanised. Is used as a connection between facade scaffolding and a stairway. 0,18 2, ,75 STARTING TRANSOM Steel, hot-dip galvanised. For fixing decks or staircases just above ground level, for 2 or 3 boards. 0,65 3, ,30 1,00 4, ,50 STEP ACCESS PLATFORM BRACKET to set up a stairway with a pre-assebled scaffold bay. 0,50 0,30 7, ,00

10 8 Verticale bracing I Base jacks Length Width Weight approx. kg DIAGONAL BRACE Steel tube Ø 48.3, hot-dip galvanised. Hooked in at the upper swivel pin on the vertical frae. With 3rd hole for fixing in connection with swivel pin coupler and hanging transos. The arrangeent of the diagonal brace ensures a perpendicular scaffold structure. PU: 50 pieces f. bay 1,50 2,56 1,50 7, ,20 f. bay 2,00 2,88 2,00 8, ,50 f. bay 2,50 3,26 2,50 9, ,40 f. bay 3,00 3,66 3,00 11, ,50 f. bay 4,00 4,53 4,00 13, ,50 BASE TRANSOM Steel, hot-dip galvanised, is used to fasten lower diagonal brace. 0,65 1, ,50 1,00 2, ,10 BASE JACK Steel, with grip nut, galvanised, fast action thread, base plate 150 x 150. Slip lock on grip nut. Can also be used as head plate. PU: 375 0,30 2, , ,50 3, , ,60 3, , ,78 3, , ,00 4, ,00 BASE JACK, SWIVELING see base jack. but also with swiveling base plate. 150 x 150. Additional longitudinal scaffold bracing at base required. PU: 250 pieces 0,50 3, ,00 ADJUSTMENT TUBE for levelling unequal ground. Use in connection with a starting transo and base jack. Steel, hot-dip galvanised. Adjustent range 10 x 0.10 = ,70 5, ,50

9 Side guards Length Width Weight approx. kg SINGLE GUARD RAIL Steel tube Ø 38 (4.00 length Ø 42.4 ), hot-dip galvanised, flattened at the ends with holes provided. Hooked in with swivel pins.

11 9 Side guards Length Width Weight approx. kg SINGLE GUARD RAIL Steel tube Ø 38 (4.00 length Ø 42.4 ), hot-dip galvanised, flattened at the ends with holes provided. Hooked in with swivel pins. PU: 100 pieces 0,65 1, ,50 1,00 2, ,00 1,50 2, ,10 2,00 3, ,00 2,50 4, ,70 3,00 5, ,50 4,00 9, ,10 TOEBOARD Ipregnated tiber with galvanised fittings for insertion between the fraes. A toeboard height of 17 c corresponds to the pean standard. PU: 70 pieces s for printed toeborads on request. 0,65 0,145 2, ,10 1,00 0,145 2, ,10 1,50 0,17 3, ,30 2,00 0,17 5, ,40 2,50 0,17 5, ,60 3,00 0,17 6, ,60 4,00 0,17 10, ,10 DOUBLE END GUARD RAIL Steel tube Ø 33.7, hot-dip galvanised, double side guards. Double side guards. Is inserted on one side on the swivel pin. Please specify width A/F with your order. PU: 25 pieces A/F 19 0,65 3, ,90 A/F 22 0,65 3, ,90 1,00 4, ,90 TOP END GUARD FRAME Steel tube Ø 48.3, hot-dip galvanised Useful for the top scaffold platfor as double end side protection and to fix decks. PU: 25 pieces 1,00 0,65 11, ,90 1,00 1,00 13, ,90

PU: 50 pieces 1,05 4,20 001048 20,80 GUARD RAIL POST WITH TRANSOM and fastening screw. Steel tube Ø 48.3, hot-dip galvanised for locating guard rails and securing the the upper decks.

12 10 Scaffold end I Scaffold expansion Length Width Weight approx. kg GUARD RAIL POST with fastening screw. Steel tube Ø 48.3, hot-dip galvanised for locating guard rails on the top scaffold platfor, with welded steel brackets to stabilize decks. PU: 50 pieces 1,05 4, ,80 GUARD RAIL POST WITH TRANSOM and fastening screw. Steel tube Ø 48.3, hot-dip galvanised for locating guard rails and securing the the upper decks. PU: 50 pieces 1,00 0,65 5, ,00 1,00 1,00 7, ,80 GUARD RAIL POST, LONG with fastening screw. Steel tube Ø 48.3, hot-dip galvanised. PU: 50 pieces 1,60 6, ,90 2,00 9, ,50 GUARD RAIL POST FOR PROTECTIVE MESH WITH TRANSOM and fastening screw. Steel tube Ø 48.3, hot-dip galvanised. Also for attachent of protective side nets in connection with guard rails. PU: 50 pieces 2,00 0,65 11, ,30 2,00 1,00 12, ,50 COUPLER BRACKET WITHOUT JOINT PIN Steel, hot-dip galvanised. with welded half coupler. Used to extend the scaffold by PU: 100 pieces A/F 19 0,30 3, ,90 A/F 22 0,30 3, ,90 COUPLER BRACKET WITH JOINT PIN Steel, hot-dip galvanised, with welded half coupler. Used to extend the scaffold by 0.30 and with joint pin to fix guard rail post. PU: 20 pieces A/F 19 0,30 4, ,70 A/F 22 0,30 4, ,70

11 Scaffold expansion Length Width Weight approx. kg HOP-UP BRACKET 2-BOARD SW19 0,65 7,60 001054 57,40 Steel, hot-dip galvanised, with half couplers. To widen by 0.

PU: 20 pieces HOP-UP BRACKET 3-BOARD Steel, hot-dip galvanised, with half couplers. To widen by 1.00 at the inside and outside of the scaffold and to lengthen the ends.

The frae bracket is used to ake scaffold lift adaptations of one frae width.

13 11 Scaffold expansion Length Width Weight approx. kg HOP-UP BRACKET 2-BOARD SW19 0,65 7, ,40 Steel, hot-dip galvanised, with half couplers. To widen by 0.65 SW22 0,65 7, ,40 at the inside and outside of the scaffold and to lengthen the ends. When extending scaffold on hop-up brackets. please request load tables. PU: 20 pieces HOP-UP BRACKET 3-BOARD Steel, hot-dip galvanised, with half couplers. To widen by 1.00 at the inside and outside of the scaffold and to lengthen the ends. (Without prop strut) PU: 20 pieces 1,00 15, ,70 FRAME BRACKET 2-BOARD Steel, hot-dip galvanised, with half couplers. The frae bracket is used to ake scaffold lift adaptations of one frae width. In contrast to the the hop-up bracket, the adaptation is not only possible at the decking height, but can be ade at any required height. This akes it possible to optially adjust the scaffold to the shape of the building, 2-board odel for vertical frae 65. PU: 20 pieces 0,65 9, ,00 FRAME BRACKET 3-BOARD as above but for vertical frae 100. (Without prop strut) PU: 20 pieces 1,00 8, ,30 SYSTEM GRID BRACKET 0,50 With half coupler, steel, galvanized. To extend or decrease the bay size in another grid diension. 0,50 6, ,40 PROP STRUT With two half couplers, for supporting the hop-up brackets. 1,77 5, ,00 1,95 5, ,50

Enables syste change fro 100 to 65. 1,00 13,50 001093 105,00 LATTICE BEAM BASE PLATE Steel, hot-dip galvanised. Use in connection with a decking transo.

14 12 Transos Length Width Weight approx. kg INTERMEDIATE TRANSOM Steel, hot-dip galvanised. adjustable height. 2-board 0,65 3, ,30 3-board 1,00 5, ,20 HANGING TRANSOM Steel, hot-dip galvanised. For bridging up to 6.00 spans and end scaffold extensions up to board 0,65 4, ,40 3-board 1,00 6, ,80 CONVERSION TRANSOM Steel, hot-dip galvanised, with joint pins and diagonal swivel pin. Enables syste change fro 100 to 65. 1,00 13, ,00 LATTICE BEAM BASE PLATE Steel, hot-dip galvanised. Use in connection with a decking transo. For further expansion of scaffold pattern when bridging with lattice beas. 6, ,50 DECKING RAIL Steel, hot-dip galvanised. Placed on lattice beas or tubes and covered with syste decks. Guarantees sooth deck surface for deck scaffolds. Please specify A/F width with your order. Special lengths on request! 1-board 0,35 2, ,10 2-board 0,65 3, ,20 3-board 1,00 4, ,00 4-board 1,50 6, ,40 6-board 2,00 7, ,00 8-board 2,50 9, ,70

13 Safety roof I Rood boundary scaffolding Syste bridging I Mobile tower assessories Length Width Weight approx. kg ROOFERS BRACKET 0.

0,65 15,00 001068 136,70 ROOF GUARD EXTENSION for decking boards, steel, hot-dip galvanised, in connection with hopup brackets for 2 and/or 3 planks,

Suitable for roof guard extensions. 2-board 3,00 001180 36,30 3-board 4,00 001171 38,60 LOCK AGAINST LIFT-OFF WITH WEDGE Steel, hot-dip galvanised.

15 13 Safety roof I Rood boundary scaffolding Syste bridging I Mobile tower assessories Length Width Weight approx. kg ROOFERS BRACKET 0.65 Meets with various requireents for painters as well as roofers. It ay be used in roof guard scaffold of scaffold class 3. Steel, hot-dip galvanised. 0,65 15, ,70 ROOF GUARD EXTENSION for decking boards, steel, hot-dip galvanised, in connection with hopup brackets for 2 and/or 3 planks, including lift-off lock. Covered with decking planks of wood steel or aluiniu. 0,65 3, ,20 LOCK AGAINST LIFT-OFF Steel, hot-dip galvanised. Suitable for roof guard extensions. 2-board 3, ,30 3-board 4, ,60 LOCK AGAINST LIFT-OFF WITH WEDGE Steel, hot-dip galvanised. to prevent against the lift off of decks. 0, ,90 CASTOR WITH SPINDLE kg axiu load, with nylon wheel, with ounted spindle height adjustable. For steel bea. PU: 100 pieces 7, ,50

0,30 1,40 000240 9,35 0,40 1,80 000242 9,75 0,50 2,00 000125 10,00 0,60 2,60 000241 12,00 1,00 3,80 000127 12,75 1,30 4,80 000131 15,50 1,50 5,50 000132 16,50 DOUBLE COUPLER Heavy-duty odel, ribbed.

16 14 Anchoring Length Width Weight approx. kg WALL TIE Steel tube Ø 48.3, hot-dip galvanised. Installation as short scaffold tie with one standard coupler, as long scaffold tie with two standard couplers. 0,30 1, ,35 0,40 1, ,75 0,50 2, ,00 0,60 2, ,00 1,00 3, ,75 1,30 4, ,50 1,50 5, ,50 DOUBLE COUPLER Heavy-duty odel, ribbed. Drop-forged steel, hot-dip galvanised, according EN 74-1 RA BB. PU: 25 pieces A/F 22 1, ,00 A/F 19 1, ,00 SWIVEL COUPLER Heavy-duty odel, ribbed. Drop-forged steel, hot-dip galvanised, according to EN 74-1 SW B. PU: 25 pieces A/F 22 1, ,50 A/F 19 1, ,50 Special couplers. see price list "universal accessories". EYE-BOLT galvanised. PU: 150 0,09 0, , ,12 0, , ,16 0, , ,19 0, , ,23 0, , ,35 0, ,70

15 Anchoring I Storage Length Width Weight approx.

PU: 100 pieces 0,07 0,007 000357 0,25 PLASTIC CAP for closing anchor drill holes.

standards, ledgers, guardrails, diagonal braces, tubes and toeboards.

The tubular supports are reovable and secured in the base frae, so that epty pallets can be transported in a

17 15 Anchoring I Storage Length Width Weight approx. kg EXPANDING PLUG for eye-bolts with a wooden thread Ø 12 for drill holes Ø 14. PU: 100 pieces 0,07 0, ,25 PLASTIC CAP for closing anchor drill holes. PU: 100 pieces 0, ,15 STACKING PALLET WITH REMOVABLE TUBES Specially suited for odule scaffolds, standards, ledgers, guardrails, diagonal braces, tubes and toeboards. Open all round, suited for stacked and crane transports. The tubular supports are reovable and secured in the base frae, so that epty pallets can be transported in a space-saving anner. Steel tube, hot-dip galvanised. PU: 5 pieces 1,25 0,85 35, ,00 Special orders on request! SCAFFOLD PALLET FOR FRAMES for standing palletisation. Load capacity 20 scaffold fraes, hot-dip galvanised. PU: 10 1,25 0,70 32, ,00 1,25 1,00 37, ,00 Special orders on request!

16 Protective equipent against falling MJ Preiu Set including: SAFETY HARNESS Revolution R2 Scaf with front and back stopper loop,

swivel connection. EN 361. Set price Set price 005610 199,90* L-XL 006273 199,90* S-M Fixing eans with strap fall attenuator Length 2.

clip to fasten safety harness, teflon-coated for longer service life. EN 354 and EN 355.

TOOL BAG fitting for ratchet key, can be directly clicked on to the safety harness or fixed to belt without ratchet.

18 16 Protective equipent against falling MJ Preiu Set including: SAFETY HARNESS Revolution R2 Scaf with front and back stopper loop, sharp-edge tested back loop extensions, quick adjustent, autoatic closures, cofort back pads, belt-end clips, elastic Duraflex belt band, swivel connection. EN 361. Set price Set price ,90* L-XL ,90* S-M Fixing eans with strap fall attenuator Length 2.00, sharp-edge tested, horizontal approval (stopping point at base height), 66 scaffold hook, flexible design for added oveent, safety clip to fasten safety harness, teflon-coated for longer service life. EN 354 and EN 355. EQUIPMENT BAG 0,27 x 0,50 (D x L), ade of PVC, red. TOOL BAG fitting for ratchet key, can be directly clicked on to the safety harness or fixed to belt without ratchet ,00* EC-type exaination certificate For the safety syste there is an EC-type exaination certificate issued by the inspection and certification body of the constructional trade association. MILLER SAFETY HELMET (as shown in the picture, but without sticker) red white ,00* ,00* *Net prices

19 17 Scaffold exaples Scaffold bay length 3.00 Scaffold length () x Working height () Working surface - List price 99,00 x 10, ,00 x 10, ,00 x 10, BASIC EQUIPMENT Vertical frae 2.00 x 0.65 steel , Tiber deck 3.00 x , Diagonal brace 3.00 bay , Single guard rail twice , Toeboard , Toeboard , Double end guard frae , Guard rail post 0.65 with transo , Top end guard frae 0, , Starting transo 0, , Base jack 0, , Total price in , , ,20 Total weight in kg , , ,00 per 2 in 33,06 33,75 34,42 ANCHORING Wall tie , Double coupler with collar nut A/F , Expanding plug , Eye-bolt 12 x , Total price in 649,30 347,30 196,30 Total weight in kg 120,00 64,00 36,00 ADDITIONAL EQUIPMENT Extra charge access decks aluiniu * ,00 Total price in 777,60 777,60 777,60 Extra charge deck board in aluiniu instead of wood ,00 Total price in , , ,00 Extra charge steel decks instead of wooden decks ,00 Total price in 4.365, , ,40 Extra charge aluiniu vertical fraes instead of steel ,00 Total price in 6.916, , ,00 * when using 4 access-decks instead of 8 wooden decks.

20 18 Scaffold exaples Scaffold bay length 2.50 Scaffold length () x Working height () Working surface - List price 100,00 x 10, ,00 x 10, ,00 x 10, BASIC EQUIPMENT Vertical frae 2.00 x 0.65 steel , Tiber deck 2.50 x , Diagonal brace 2.50 bay , Single guard rail twice , Toeboard , Toeboard , Double end guard frae , Guard rail post 0.65 with transo , Top end guard frae , Starting transo , Base jack , Total price in , , ,90 Total weight in kg , , ,00 per 2 in 39,47 40,08 41,19 ANCHORING Quick anchor , Double coupler with collar nut A/F , Expansion plug , Eye-bolt 12 x , Total price in 649,30 347,30 196,30 Total weight in kg 120,00 64,00 36,00 ADDITIONAL EQUIPMENT Extra charge access decks aluiniu * ,00 Total price in 637,60 637,60 637,60 Extra charge deck board in aluiniu instead of wood ,00 Total price in , , ,20 Extra charge steel decks instead of wooden decks ,00 Total price in 5.264, , ,20 Extra charge aluiniu vertical fraes instead of steel ,00 Total price in 5.184, , ,20 * when using 4 access-decks instead of 8 wooden decks.

21 Notes 19

22 20 Notes

23 21 Fax order for MJ-Gerüst GbH Ziegelstraße 68 I D Plettenberg Telephone: +49 (23 91) sales@j-geruest.de I Copany: City / Date Order no. Contact Nae of buyer Custoer no. (if applicable) Order Inquiry Product description - Quantity Unit price / Total value / All prices are excl. of VAT applicable at the tie of shipent. All diensions and weights are non-binding approxiate values. Technical data is subject to change All prices are excl. of VAT applicable at the tie of shipent. All diensions and weights are non-binding approxiate values.technical data is subject to change without notice. Technical data is subject to change without notice. s are charged as applicable on the day of shipent. Sale is subject exclusively to our sales ters and delivery conditions. In brief: place of business and jurisdiction is Plettenberg. Extended reservation of property rights until full payent of all our outstanding accounts receivables. Our prices are ex works.. Shipping address: Order value / Date of delivery Shipping ethod Ters of delivery Packaging costs Ters of payent Other MJ consultant Custoer signature Copy this for and fax to ( ) Exectuive Board: Gerhard Junior, Rainer Junior, Josef Engels I Headquarter: Plettenberg I Register court: AG Iserlohn HRB 2898 I VAT ID.: DE

24 Stark gerüstet. MJ-Gerüst GbH Ziegelstraße 68 D Plettenberg Telephone +49 (23 91) Fax +49 (23 91) eail info@j-geruest.de Berlin office Poratzstraße D Eberswalde Further copanies of the Junior Copany Group: Junior Kühlkörper GbH Precision coponents for the electronic and electrical industry MJ - Modul Rent GbH Sale and rental of roo containers for housing estates, office buildings, industrial and coercial MJ-Gerüst GbH MJ ENG As at

BROCHURE edition 07/07.03

EXCELLENCE IN SCAFFOLDING BROCHURE edition 07/07.03 CONTENTS At a glance 3 Construction / The ain advantages of the syste 4-5 Fraes 6 Decks 7 Vertical Bracing 8 Base Jacks 8 Outside Access 9 Inside Access