MevaDec. Contents. Ref. No. Description / Application Product m² list kg

Transcription

1 Ref. No. Description / Application Product m² list kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless another measure is shown. Contents Accessories for attachment...79 Cleaning scraper...6 Forked prop head...7 Guard-railing post...70 Guard-railing post 4/120 UK...71 MD assembly lock...66 MD assembly stick MD beam stiffener...67 MD compensation beam...66 MD cover profile...69 MD dismantling auxiliary...6 MD drop head...63 MD laser support...72 MD panels...65 MD primary beam...62 MD prop...77 MD prop connector...67 MD prop head...64 MD safety claw...67 MD secondary beam...62 MD support for guard-railing post / beam...70 MD support for guard-railing post / panel...69 MD transport rack...74 MEP prop with SAS...76 ME prop...75 Pin...7 Railing clamp...71 Scaffold tube...72 Spare blade for cleaning scraper...69 Swivel-joint coupler 4/ Swivel-type castor Transport angle...73 Tripod...79 MD 61

2 MD primary beam Aluminium profile, powder coated; primary beams and MD drop heads build the load bearing system of MevaDec. The grooves are punched to reduce the cleaning effort MD-primary beam MD-primary beam MD-primary beam MD-primary beam (270 / 2 / 0) Static cross section values for primary beam A = 27. cm² W = cm³ I = cm 4 E x I = 91.0 knm² zul. Q = 66.6 kn zul. M = 16.5 knm MD secondary beam Aluminium profile with plastic nailing strips on top and at the bottom. Can be used in 2 ways: a) If used with the primary-and-secondary-beam method, it supports the facing. b) With the drop-head-beam panel method it is used for compensation MD-secondary beam MD-secondary beam Static cross section values for secondary beam A =.6 cm 2 W = 43.0 cm 3 I = cm 4 E x I = knm² zul. Q = 43.0 kn zul. M = 5.9 knm Nailing strip MD 62

3 MD drop head Galvanized and partly powder-coated. A safety latch prevents disengagement. The MD drop head permits lowering the formwork by approx. 19 cm so that it can be removed and reused to form the next cycle (early stripping); only props with drop heads remain in position to support the slab until the final setting of the concrete MD-drop head MD-drop head (plug-in version) The drop head is mounted to MD/ME props with 2 bolts M12x35 and lock nut M12 or to the aluminium profile of MEP props with bolts M16x40 and lock nut M16. The pluggable drop head is secured with pin /90 to MD/ME props or with pin /135 to the aluminium profile of MEP props MD 63

4 MD prop head Powder-coated and galvanized; supports the MD panels and secures them automatically against unhooking. The panels can be suspended from below or placed from the top MD-prop head MD-prop head (plug-in version) The prop head is mounted to MD/ME props with 2 bolts M12x35 und and lock nut M12 or to the aluminium profile of MEP props with bolts M16x40 and lock nut M16. The pluggable prop head is secured with pin /90 to MD/ME props or with pin /135 to the aluminium profile of MEP props MD 64

5 MD panels The panel frames are made up of closed aluminium profiles, powder-coated, torsion-proof and easy to clean. The height is cm and the frame 22 mm thick. The panels have an integral alkus GM facing MD-panel GM / MD-panel GM / MD-panel GM / MD-panel GM / MD-panel GM... 0/ MD-panel GM... 0/ MD-panel GM... 0/ (0, 60, 40) (60, 40) MD 65

6 MD compensation beam Powder-coated aluminium profile with nailing strip. Is used to support filler areas. For 21 mm facing (for 27 mm facing upon request) MD-compensation beam MD-compensation beam MD-compensation beam MD-compensation beam Nailing strip MD assembly lock Galvanized. Tightly connects MD panels to each other and clamps MD compensation beams to MD panels. Clamping length 4.4 cm MD-assembly lock Clamping length 4.4 cm MD 66

7 MD beam stiffener Galvanized; is used to secure cantilevering primary beams (e.g. at slab edges) MD-beam stiffener Hammer head screw M MD prop connector Galvanized; permits support of primary beams where no drop head can be used, e.g. for intermediate support, at walls and with cantilevering primary beams. Its integrated hammer head screw permits attachment to the primary beams. The prop connector is provided with an eye to attach a tensioning chain for anchoring the slab formwork to the ground, e.g at slab edges MD-prop connector Hammer head screw M MD safety claw Galvanized, clamps planks to the bottom of primary beams. When using MEP props, the safety claw can be used to attach a tripod to the aluminium profile MD-safety claw MD 67

8 MD assembly stick 340 Galvanized, eases the assembly when applying the panel method. The panels are simply swung up and temporarily supported by the MD assembly stick. We recommend using 2 sticks for a smooth assembly sequence. The stick has an adjustment range from 1.95 to 3.40 m MD-assembly stick Adjustment range Adjustable height = clearance minus 12 cm 3 MD dismantling auxiliary Galvanized; eases stripping of primary beams if these stick to the slab due to an increased concrete adhesion or inclined props MD-dismantling auxiliary hexagonal screws Mx50 with washer and nut Transport position Cleaning scraper Galvanized; is used to clean the groove of the MD primary beam. Tip replaceable MD-cleaning scraper Ø MD 6

9 Spare blade for cleaning scraper Spare part. Replaces the used blade of the cleaning scraper Spare blade for cleaning scraper Ø 1.7 Ø Ø Ø 1.7 MD cover profile Plastic cover. Closes the gap between two MD panels when applying the drop head beam panel method (FTE). Length 1.50 m. Packing unit with pcs MD-cover profile... l=1.5m MD support for guard-railing post / panel Galvanized. Permits attachment of a guard railing post at the MD panels and is used to form a stop end at the edge of the slab MD-support for guard-railing post /panel MD 69

10 MD support for guard-railing post / beam Galvanized. Permits attachment of a guard railing post at primary and secondary beams and is used to form a stop end at the edge of the slab with primary and secondary beams MD-support for guard-railing post /beam Clamping length cm 1. Guard-railing post Galvanized. Is plugged into the MD support for panel or beam Guard-railing post 0, galv Guard-railing post 0, galv (64.6) 43.5 (61.5) () (163) The numbers in parentheses refer to guard-railing post 0 MD 70

11 Guard-railing post 4/120 UK Galvanized. With manifold to plug into the scaffolding bracket and with tube Ø 4 mm to attach scaffold tube couplers Guard-railing post 4/120 (UK), galv Guard-railing post 4/ Ø 4 mm Railing clamp Coated; is used as side railing at the slab edge and can be clamped to all kinds of beams or concrete slabs. Railing clamp 0: height 0 cm, clamping length 45 cm Railing clamp 0: height 0 cm, clamping length 50 cm Railing clamp Railing clamp Clamping length Clamping length MD 71

12 Scaffold tube Galvanized. Is used as a handrail when using the guard-railing post 4/120 UK Scaffold tube 4/ Scaffold tube 4/ Scaffold tube 4/ Scaffold tube 4/ Scaffold tube 4/ Swivel-joint coupler 4/4 Galvanized. Connects 2 scaffold tubes with 4.3 mm Ø at any angle Swivel-joint coupler 4/ MD laser support Aluminium. Is attached to the groove of the primary beam and allows one person to level the slab formwork MD-laser support Ø3 Adjustment range MD 72

13 Transport angle Is used to stack and transport 5 to 12 MD panels. Distance between holes is cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Maximum load capacity is kn per angle. For safety reasons consider 20 kn as maximum capacity for the whole stack Transport angle Transport angle, rigid type x x MD 73

14 Swivel-type castor 0 Is used to move MD panel stacks in transport angles or in the MD transport rack (4 castors are required in either case). The load capacity per castor is 1 kn. The overall height of the stack including castors is 2. m with transport angles and 2.45 m with the MD transport rack. Ø.5 Ø Swivel-type castor Ø MD transport rack Galvanized. Is used to stack and transport up to panels 160 x 0 cm. Two transport racks can be stacked (length/ width/height 175 x 2 x 232 cm). For the operation and safety check see the transport rack operating instructions MD-transport rack ca MD 74

15 MevaDec Ref. No. ME prop Galvanized. According to European Standard EN 65, class E. Admissible load capacity 30 kn. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). Description / Application m² kg ME prop 250/30... ( ) ME-prop 250/30 with MD-drop head ME prop 350/30... ( ) ME-prop 350/30 with MD-drop head ME prop 450/30... ( ) ME prop 550/30... ( ) Adjustment range Adjustment range Fine adjustment 11.5 Adjustment range Adjustment range with MD-drop head Fine adjustment 11.5 Adjustment range Adjustment range with MD-drop head x 7 15 x 7 19 x x MD 75

16 MEP prop with SAS Combination of steel inner tube and aluminium outer tube with T groove to attach reinforcing frames. The SAS quick lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 65 the load capacity is as follows when used as a single prop: MEP 300 with SAS 40 kn at any extension; MEP 450 with SAS 20 kn at any assembly position (or 30 kn when the inner tube is at the bottom). Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). Adjustment range Fine adjustment MEP-prop 300 with SAS. (15-300) MEP-prop 300 with MD-drop head MEP-prop 450 with SAS.. ( ) MEP-prop 450 with MD-drop head Adjustment range Adjustment range Plate inner tube 1.7 Plate outer tube Adjustment range Fine adjustment 11.5 Adjustment range Adjustment range MD 76

17 MevaDec Ref. No. MD prop m² kg MD prop 300/20... ( ) MD-prop 300/20 with MD-prop head MD prop 400/20... ( ) MD-prop 400/20 with MD-prop head MD prop 550/20... ( ) Adjustment range MD 550/20: Fine adjustment x Adjustment range MD 400/20: Adjustment range with MD-prop head: x Fine adjustment x Adjustment range MD 300/20: Adjustment range with MD-prop head: Galvanized. According to the European Standard EN 65 class D the permissible load capacity is 20 kn at any extension. Higher load capacities are permitted when used with MEVA formwork (see the MevaDec Technical Instruction Manual). Description / Application MD 77

18 Forked prop head Galvanized. The forked prop head can be used as a support instead of a drop head at the beginning or end of a primary beam row. The forked prop head 20 is also applied with formwork girders H20 and the forked prop head 16 with formwork girders H Forked prop head Forked prop head Ø 0.7 Pin Galvanized. Are used to attach MD drop heads, MD prop heads of forked prop heads, etc. Pin /90 is used for steel tube props up to a diameter of 63 mm. Pin /135 is used with the aluminium profile of MEP props and MEP extension pieces Pin /135, (for MEP) Pin / Ø3.2.5 Ø 1.4 Ø 1.4 MD 7

19 Tripod Galvanized auxiliary to stabilize props of diameters from 4 to 0 mm. The turnable legs allow the tripod in rooms, along walls or in corners. The tripod can be attached to the aluminium profile of the MEP props with the MD safety claw Tripod Accessories for attachment Not shown. Are used to attach MD drop heads and MD prop heads to the MD and ME props Hexagonal screw M12x35, galv., DIN Hexagonal locking nut M12, galv., DIN Hexagonal screw M16x40, (for MEP), galv., DIN Hexagonal locking nut M16, (for MEP), galv., DIN Washer M16, (for MEP), galv., DIN MD 79

20 Headquarters (Germany) Logistic Centers International Sales & Service MEVA Schalungs-Systeme GmbH Industriestraße 5 D Haiterbach Tel Fax info@meva.de A-Pfaffstätten, Tel D-Berlin, Tel D-Haiterbach, Tel D-Hannover, Tel H-Budapest, Tel UAE Dubai, Tel USA-Springfield, Tel A-Pfaffstätten, Tel AUS-Adelaide, Tel B-Kruibeke, Tel CDN-Toronto, Tel CH Seon, Tel CO-Bogotá, Tel F Sarreguemines, Tel GB Tamworth, Tel H Budapest, Tel HR-Bestovje, Tel IND-Mumbai, Tel LT-Kaunas, Tel MAL-Perak, Tel N-Oslo, Tel NL Gouda, Tel PA-Panama City PL-Bialystok, Tel RUS Moskva, Tel SGP-Singapore, Tel SLO-Petrovce, Tel UAE Dubai, Tel USA Springfield, Tel