SERIES FEATURE MAX RATING SEAL RATING APPROVALS MOUNTING CIRCUITRY
|
|
- Wilfred Roberts
- 5 years ago
- Views:
Transcription
1 SWITH SELETION GUIDE Rocker Switches SERIES FEATURE MAX RATING SEAL RATING APPROVALS MOUNTING IRUITRY 0VA, VD) (Panel Opening) K Sealed, 6A IP6S UL (E605), SA (LR65),.5 x 0.55 SPST, SPDT Illuminated DEMKO (9-00), (UL500), Ignition Protected, RoHS & WEEE ompliant K Sealed, 6A IP6S UL (E605), SA (LR65),.5 x SPST, SPDT Illuminated DEMKO (9-00), (UL500), Ignition DPST, DPDT Protected, RoHS & WEEE ompliant K Sealed, 0A IP6S RoHS & WEEE ompliant.50 x 0.95 SPST, SPDT Illuminated DPST, DPDT, SPTT K Snap-In Toggle, 6A IP6S RoHS & WEEE ompliant.5 x SPST, SPDT Illuminated DPST, DPDT K5 Sealed, 0A IP6S RoHS & WEEE ompliant.5 x 0.5 SPST, DPDT Illuminated SPDT, DPDT, SPTT Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
2 SEALED, ILLUMINATED ROKER SWITHES K/K SNAP-IN ROKERS LOW OST, SNAP-IN ROKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. Sealed to IP6S with an optional panel gasket available. The K series is offered in single pole configuration while the K series is available in single and double pole configurations. Both series offer illuminated models. Illumination can be independent or dependent of the switch position or a combination of both. A choice of red, green, clear or amber colored lenses are offered in illuminated models. Illumination options include incandescent, LED or neon light sources. K Series Single Pole ROKER SWITHES Mounting is simple and quick; snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size specified. A choice of models are offered to handle power levels to 6 amps, / HP and low level electronic switching applications. OTTO can provide custom colors upon request. Value-added assemblies with wire leads are also available. Please consult the factory for assistance. Features: Withstands direct water spray Watertight to IP6S Fits industry standard panel openings for drop-in replacement of panel sealed & unsealed switches Snap-in feature accommodates a wide range of panel cutouts Switches up to 6 amps UV & solvent resistant Withstands extreme shock & vibration ustom legends available & -position, momentary & maintained action Incandescent, LED & neon illumination with independent & dependent light source options UL recognized & SA certified Ignition protected RoHS/WEEE/Reach compliant Standard haracteristics/ratings: ELETRIAL RATINGS: Load Sea VD ycles or 5/50VA, 60Hz Resistive 6A 5,000 Resistive 0A 50,000 Inductive 0A 5,000 Lamp 5A 5,000 Motor 0.5HP 5,000 DWV 050Vrms except across light terminals Low Level 0mV Electrical Life: LIGHTING: Light Source Incandescent Neon LED K Series Single & Double Pole See Rating hart Rating (VD) 6V, V, V (VA) 5V, 50V (VD) V, 6V, V, V Mechanical Life: 00,000 cycles Seal: IP6S Operating Temp Range: -0 to +5 US MATERIALS: ase: Button: Base: Terminals/ontact: Terminal Hardware: Mounting Hardware: Thermoplastic Thermoplastic Thermoplastic Brass, silver alloy with silver plate, gold flash for low level Screws and lockwashers provided when applicable K/K series recommended Quick onnect terminals: AMP 605- for -6 AWG AMP 00- for - AWG None provided Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
3 K SNAP-IN ROKERS SEALED, ILLUMINATED ROKER SWITHES LOW OST, SNAP-IN ROKER FOR WET & DUSTY ENVIRONMENTS K PART NUMBER ODE Part Number ode ontinued Below K X X X X Terminal Style/ Switch Rating A. Q../Std. B. Screw/Std.. Solder/Std. D. Q../Low Level E. Screw/Low Level F. Solder/Low Level G. P Pin/Std. H. P Pin/Low Level Actuator olor/style A. Red/Rocker B. Black/Rocker. White/Rocker D. Red/Paddle E. Black/Paddle F. White/Paddle G. Red/Rocker Pinned H. Black/Rocker Pinned J. White/Rocker Pinned K. Red/Short Paddle Pinned L. Black/Short Paddle Pinned M. White/Short Paddle Pinned N. Red/Standard Paddle Pinned P. Black/Standard Paddle Pinned R. White/Standard Paddle Pinned T. Red/Short Paddle U. Black/Short Paddle V. White/Short Paddle Switch Action/ircuit Position Position Position ircuit A B A. - NONE OFF SPST B. - NONE - SPDT. (-) NONE OFF SPST D. (-) NONE - SPDT E. (-) OFF (-) SPDT F. - OFF - SPDT G. (-) OFF - SPDT H. OFF NONE - SPST NOTE: ( ) denotes momentary action. Position A Position B Position Light Type A. No Light B. 6V Incandescent. V Incandescent D. V Incandescent E. 5VA Neon F. 50VA Neon G. V Red LED H. V Green LED J. V Amber LED K. 6V Red LED L. 6V Green LED M. 6V Amber LED N. V Red LED P. V Green LED Q. V Amber LED R. V Red LED S. V Green LED T. V Amber LED K PART NUMBER ODE ONTINUED FROM ABOVE K ontinued X X X X Lens olor Position A Position A. No Lens A. No Lens B. Red B. Red. Green. Green D. Amber D. Amber E. lear E. lear Light/ircuit Location A. No Light B. F. ON in position A Wired to terms &. ON in position A Wired to terms & ON in position Wired to terms & Legend & Orientation A. None B.. D. E. ON in position Wired to terms & G. F. G. NOTES: No momentary switches with dependent lights. Neon lamps only to be coded with clear or amber lenses. LED lenses must be clear or same color as LED. No dependent light in OFF position. All legends printed on actuators without lens(es) will be white except actuator codes, F, J, M & R. All legends printed on lenses will be white except on clear lens(es) will be black. K panel plugs available as shown on page 6. D. at position A Wired to terms & E. at position Wired to terms & D = I = ON in position A Wired to terms & ON in position Wired to terms & at position A Wired to terms & ON in position Wired to terms & NOTES: LED anode (+) terminal number shown in bold. Light on OFF side must be independent. ontact factory for multiple light types in the same switch. H. H. J. K. L. M. N. P. R. Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
4 SEALED, ILLUMINATED ROKER SWITHES K SNAP-IN ROKERS LOW OST, SNAP-IN ROKER FOR WET & DUSTY ENVIRONMENTS ROKER SWITHES Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
5 K SNAP-IN ROKERS SEALED, ILLUMINATED ROKER SWITHES K X X X Terminal Style/ Switch Rating A. Quick onnect/ Standard B. Screw/Standard. Solder/Standard D. Quick onnect/ Low Level E. Screw/Low Level F. Solder/Low Level LOW OST, SNAP-IN ROKER FOR WET & DUSTY ENVIRONMENTS, & POLES Actuator olor/style A. Red Standard B. Black Standard. White Standard D. Red Standard Paddle E. Black Standard Paddle F. White Standard Paddle G. Red Short Paddle Pinned H. Black Short Paddle Pinned J. White Short Paddle Pinned K. Red Standard Paddle Pinned L. Black Standard Paddle Pinned M. White Standard Paddle Pinned N. Red Standard Pinned P. Black Standard Pinned R. White Standard Pinned NOTE: For custom colors, contact factory. K PART NUMBER ODE Switch Action/ircuit Position Position Position ircuit A B A. - NONE OFF SPST B. - NONE - SPDT. (-) NONE OFF SPST D. (-) NONE - SPDT E. (-) OFF (-) SPDT F. - OFF - SPDT G. (-) OFF - SPDT H. -/- NONE OFF DPST J. -/- NONE -/- DPDT K. (-)/(-) NONE OFF DPST L. (-)/(-) NONE -/- DPDT M. (-)/(-) OFF (-)/(-) DPDT N. -/- OFF -/- DPDT P. (-)/(-) OFF -/- DPDT Q. - NONE (-) SPDT R. OFF NONE (-) SPST S. -/- NONE (-)/(-) DPDT T. OFF NONE (-)/(-) DPST U. - OFF (-) SPDT V. -/- OFF (-)/(-) DPDT NOTE: ( ) denotes momentary action. K PART NUMBER ODE - ONTINUED FROM ABOVE Part Number ode ontinued Below X X X X X POSITION "A",, POSITION "B",, POSITION "",, Light Type A. No Light B. 6V Incandescent. V Incandescent D. V Incandescent E. 5 VA Neon F. 50 VA Neon G. V Red LED H. V Green LED J. V Amber LED K. 6V Red LED L. 6V Green LED M. 6V Amber LED N. V Red LED P. V Green LED Q. V Amber LED R. V Red LED S. V Green LED T. V Amber LED Lens olor Position A Position A. No Lens A. No Lens B. Red B. Red. Green. Green D. Amber D. Amber E. lear E. lear NOTES: No momentary switches with dependent lights. Neon lamps only to be coded with clear or amber lenses. LED lenses must be clear or same color as LED. K connector P/N 065. Recommended Quick onnect Terminals: AMP 605- for -6 AWG wire with insulation OD AMP 00- for - AWG wire with insulation OD No dependent light in OFF position. All legends printed on actuators without lens(es) will be white except actuator codes, F, J, M & R. All legends printed on lenses will be white except on clear lens(es) will be black. K panel plugs available as shown on page 6. D = Light/ircuit Location ON in position A Wired to terms & ON in position Wired to terms & at position A Wired to terms & at position Wired to terms & A. No Light B. F. ON in position A Wired to terms & ON in position Wired to terms & ON in position A Wired to terms & at position Wired to terms & ON in position A Wired to terms & ON in position Wired to terms & Legend & Orientation A. None I = NOTES: LED anode (+) terminal ON in position A Wired to terms & number shown in bold. P. R. Light on OFF side must be ON in position Wired to terms & independent. Not available in DP ontact factory for multiple light types in the same switch. Specifications Subject To hange Without Notice sales@is-rayfast.com 5 Phone: +(0) D. E. G. H. J. B. D. F. H. K. M.. E. G. J. L. N.
6 SEALED, ILLUMINATED ROKER SWITHES K SNAP-IN ROKERS LOW OST, SNAP-IN ROKER FOR WET & DUSTY ENVIRONMENTS, & POLES K A A_ SPST - ON-NONE-OFF SHEMATI K H A_ K A_ SPST - ON-NONE-ON SHEMATI K J A_ K A_ SPST - (ON)-NONE-OFF SHEMATI K K A_ K D A_ SPDT - (ON)-NONE-ON SHEMATI K L A_ K E A_ SPDT - (ON)-OFF-(ON) SHEMATI K M A_ K F A_ SPDT - ON-OFF-ON SHEMATI K N A_ K G A_ SPDT - (ON)-OFF-ON SHEMATI K P A_ ROKER SWITHES DPST - ON-NONE-OFF SHEMATI DPDT - ON-NONE-ON SHEMATI DPST - (ON)-NONE-OFF SHEMATI DPDT - (ON)-NONE-ON SHEMATI DPDT - (ON)-OFF-(ON) SHEMATI DPDT - ON-OFF-ON SHEMATI DPDT - (ON)-OFF-ON SHEMATI K Q A_ SPDT - ON-NONE-(ON) SHEMATI K R A_ SPST - OFF-NONE-(ON) SHEMATI K S A_ DPDT - ON-NONE-(ON) SHEMATI INDIATES MAINTAIN ATION (FIXED POSITION) INDIATES MOMENTARY ATION (AUTOMATI RETURN POSITION) DIMENSIONS ARE IN INHES. TOLERANES.XX.0.XXX.00 ANGLES º DO NOT SALE DRAWING K T A_ K U A_ SPDT - ON-OFF-(ON) SHEMATI DPST - OFF-NONE-(ON) SHEMATI K V A_ DPDT - ON-OFF-(ON) SHEMATI K F B_ K F K F D_ K F E_ K F F_ K F G_ SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" & IND LED IN "" K F H_ K F J_ K F B_ K F K F D_ K F E_ SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" & DEP LED IN "" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" & IND LED IN "" SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/IND NEON BULB IN "" K F F_ K F G_ K F H_ K F J_ K F B_ K F SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP NEON IN "A" & IND NEON IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON IN "A" & DEP NEON IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON IN "A" & IND NEON IN "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "" K F D_ K F E_ K F F_ K F G_ K F H_ K F J_ SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" & "" SPDT - ON-OFF-ON SHEMATI SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" & IND BULB IN "" W/IND BULB IN "A" & DEP BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" & IND BULB IN "" Specifications Subject To hange Without Notice sales@is-rayfast.com 6 Phone: +(0)
7 K SNAP-IN ROKERS SEALED, ILLUMINATED ROKER SWITHES LOW OST, SNAP-IN ROKER FOR WET & DUSTY ENVIRONMENTS, & POLES Specifications Subject To hange Without Notice Phone: +(0)
8 SEALED, ILLUMINATED ROKER SWITHES K SEALED ROKERS ATTRATIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS The OTTO K rocker switch is a quality, precision switch designed to comply with standards established for appliance, marine (ignition protection) and off-road vehicles along with other demanding applications where rugged rocker switches are required. K sealed rocker switches snap into industry-standard panel cutouts. hoose illuminated and printed legends, thru-panel drain option and switching compatibility from low level to 0 amps. The K offers a choice of LED, incandescent and neon illumination. Legends can be stamped onto a non-illuminated button, stamped onto an illuminated lens or laser etched into the lens and backlit. Available in standard and low level contact ratings, the K rockers will fit a wide range of applications. Expect a minimum of 5,000 cycles at a full rated load of 0 amps resistive or 5 amps inductive. 00,000 cycles mechanical. A full complement of switch operation is available including momentary and maintained action in or -position switches in SPST, SPDT, SPTT, DPST and DPDT circuit arrangements. OTTO can provide custom colors upon request. Value-added assemblies with wire leads are also available. Please consult the factory for assistance. Features: Sealed watertight per IP6S Snap-in panel mounting into industry standard panel cutout Optional panel seal gasket Thru-panel drain option LED, neon & incandescent lighting 0.50 Quick onnect terminals Optional one-piece connector Optional terminal barriers Low level up to 0 amp switch onfigurable Single Pole Triple Throw (SPTT) with external jumpers RoHS/WEEE/Reach compliant Standard haracteristics/ratings: ELETRIAL RATINGS: Load Sea Level Sea 5VA, 60Hz Resistive 0A 6A Inductive 5A 5A Lamp 5A 5A Motor 0VA DWV 050Vrms except across light terminals Low Level 0mV Electrical Life: LIGHTING: Light Source Incandescent Neon LED 5,000 cycles Rating (VD) 6V, V, V (VA) 5V, 50V (VD) V, 6V, V, V Mechanical Life: 00,000 cycles Seal: IP6S Operating Temp Range: -0 to +5 MATERIALS: ase: Button: Terminals/ontact: Terminal Hardware: Mounting Hardware: Thermoplastic, black Thermoplastic Brass, silver alloy with silver plate, gold flash for low level K series recommended Quick onnect terminals: AMP 605- for -6 AWG AMP 00- for - AWG None provided ROKER SWITHES Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
9 K SEALED ROKERS SEALED, ILLUMINATED ROKER SWITHES K SERIES PART NUMBER ODE Part Number ode ontinued Below K X X XX X X Base Options ase Style/Button olor Switch Action/ircuit Light Source Type Light ircuit A. With Keying Pin Only Silver Plate B. Without Barriers or Pin Silver Plate. With Terminal Barriers Only Silver Plate D. With Keying Pin Only Low Level Rating Gold Plate E. Without Barriers or Pin Low Level Rating Gold Plate F. With Terminal Barriers Only Low Level Rating Gold Plate G. With Keying Pin Only No Plate H. Without Barriers or Pin No Plate J. With Terminal Barriers Only No Plate A. ase With Drain Holes Button olor: Black B. ase Without Drain Holes Button olor: Black. ase With Drain Holes Button olor: Red D. ase Without Drain Holes Button olor: Red E. ase With Drain Holes Button olor: White F. ase Without Drain Holes Button olor: White NOTE: Switch case is black for all options below:. ase With Drain Holes Button Not Included. ase Without Drain Holes Button Not Included Position Position Position ircuit A B A. - NONE OFF SPST A. -/-9 NONE OFF DPST B. - NONE - SPDT B. -/-9 NONE -/- DPDT. (-) NONE OFF SPST. (-)/(-9) NONE OFF DPST D. (-) NONE - SPDT D. (-)/(-9) NONE -/- DPDT E. (-) OFF (-) SPDT E. (-)/(-9) OFF (-)/(-) DPDT F. - OFF - SPDT F. -/-9 OFF -/- DPDT G. (-) OFF - SPDT G. (-)/(-9) OFF -/- DPDT Special ircuits Position Position Position Special A B ircuits H. -/-9-9 OFF ON/ON/OFF J. -/-9-9 NONE ON/ON/NONE K. (-)/(-9) -9 OFF (ON)/ON/OFF L (-)/(-9) -9 NONE (ON)/ON/NONE M. -/-9 -/-9 -/- ON/ON/ON N. (-)/(-9) -/-9 -/- (ON)/ON/ON P. (-)/(-9) -/-9 (-)/(-) (ON)/ON/(ON) R. -/-9 OFF/-9 OFF/OFF ON/OFF/OFF ON/ON/OFF S. (-)/-9 OFF/-9 OFF/OFF (ON)/OFF/OFF ON/ON/OFF A. No Illumination B. 6V Incandescent. V Incandescent D. V Incandescent E. 5VA Neon F. 50VA Neon G. V Red LED H. V Green LED J. V Amber LED K. 6V Red LED L. 6V Green LED M. 6V Amber LED N. V Red LED P. V Green LED Q. V Amber LED R. V Red LED S. V Green LED T. V Amber LED POS. A 6 ircuit Terminal onnections A. None None B. Dep. in A (-) & (+). Dep. in (+) & 5(-) D. Ind. in A (-) & 6(+) E. Ind. in 5(-) & 0(+) F. Dep. in A (-) & (+) Dep. in (+) & 5(-) G. Dep. in A (-) & (+) Ind. in 5(-) & 0(+) H. Ind. in A (-) & 6(+) Dep. in (+) & 5(-) J. Ind. in A (-) & 6(+) Ind. in 5(-) & 0(+) NOTE: Polarity only applies to LED circuits. SWITH ATION/IRUIT 0 6, 0,5 6, 0,5 POS POS. B 0 NOTE: ( ) denotes momentary action. K PART NUMBER ODE - ONTINUED FROM ABOVE X X XX XX X X X 6, 0,5 Lens olor Legend Style Legend olor Legend Orientation Position A Position. Transparent Red. Transparent Red. Transparent Green. Transparent Green. Transparent Amber ➀. Transparent Amber ➀. lear ➀. lear ➀ 5. Translucent White➁ 5. Translucent White ➁ Z. No Lens ➂ Z. No Lens ➂ NOTE: It is not recommended to use green LEDs with translucent white lenses. This will reduce light intensity. Use clear lenses with green LEDs for maximum light intensity. ➀ Recommended for neon lamps. ➁ Special Order: Ultra bright green LED to be used with translucent white lenses. ➂ Legend colors B & D are only available on lens color Z. STOP HERE for unlighted switches without legends. Example: KAAIFAA.6 ±.00 K panel plugs available as shown on page 60. STOP HERE for lighted switches without legends.. Position A ZZ. No Legend Example: KAAIFNH- Position ZZ. No Legend NOTE: For all other legend options, refer to the legend table on page 6, find the two digit code and enter the code in the appropriate position(s)..06 TYP. Position A Position. Red. Red. Black. Black 9. White 9. White B. Backlight/ B. Backlight/ Daylight White ➃ Daylight White ➃ D. Backlight/ D. Backlight/ Deadfront ➃ Deadfront ➃ Z. No Legend Z. No Legend ➃ For legend color B and D, please use button color A & B and lens color Z for each position. Specifications Subject To hange Without Notice sales@is-rayfast.com 9 Phone: +(0) Recommended Quick onnect Terminals: AMP 605- for -6 AWG AMP 00- for - AWG. Std Position A Position K onnector P/N 05-A Without Latches P/N 05-B With Latches Panel Seal Gasket P/N 00 Order separately for use with switches without drain holes. Panel Plug See Panel Plug (PP) page 6.
10 SEALED, ILLUMINATED ROKER SWITHES K SEALED ROKERS SNAP-IN PANEL MOUNTING, ATTRATIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS.0.9 SIDE "A".. ROKER SWITHES LABEL SIDE ""..9 TERMINAL ID.5.9 TERMINAL BARRIER (OPTIONAL).5 TYP. SWITH SHOWN WITH TERMINAL BARRIERS ONNETOR KEY FEATURE OPTIONAL SWITH SHOWN IN POSITION "A" LIGHT TERMINAL LOATION IND IN "A" (LED POLARITY NOTED) ANODE (+) LIGHT TERMINAL LOATION IND IN "" (LED POLARITY NOTED) ANODE (+).5 ATHODE (-) ATHODE (-) LIGHT TERMINAL LOATION IND/DEP IN "A" (LED POLARITY NOTED) POSITION "" STATIONARY TERMINAL SIDE (TERMINAL NUMBERS & ) LIGHT TERMINAL LOATION IND/DEP IN "" (LED POLARITY NOTED) POSITION "A" STATIONARY TERMINAL SIDE (TERMINAL NUMBERS & 9) OMMON TERMINALS ( & ) TERMINAL LOATIONS AS VIEWED FROM BOTTOM OF SWITH (ASE REMOVED FOR LARITY) ONTAT MADE IN OPPOSITE DIRETION OF ROKER TRAVEL LENSES/LEGEND LOATIONS X.50 SQ. LENSES Specifications Subject To hange Without Notice sales@is-rayfast.com 0 Phone: +(0)
11 K SNAP-IN TOGGLES SEALED, ILLUMINATED SNAP-IN TOGGLE LOW OST, SNAP-IN TOGGLE FOR WET & DUSTY ENVIRONMENTS, & POLES The K series snap-in toggle switches are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. They are totally sealed so the switch can withstand direct water spray and submersion, even during operation. Sealed to IP6S with an optional panel seal available. The K series is offered in single and double pole configurations. Toggle action includes and -position, momentary and maintained operation in a combination of variations. Mounting is simple and quick; snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size specified. Existing unsealed applications are easily upgraded to sealed functionality because the K series drops into existing panel cutouts. A choice of models are offered to handle current from 6 amps to low level electronic switching levels. Features: Withstands direct water spray Sealed to IP6S Fits industry standard panel openings for drop-in replacement of panel sealed & unsealed switches Snap-in feature accommodates a wide range of panel cutouts Switches up to 6 amps UV & solvent resistant Withstands extreme shock & vibration Legends & illuminated function indicators available & -position, momentary, maintained action & center OFF RoHS/WEEE/Reach compliant Single & Double Pole Standard haracteristics/ratings: LED, Neon or Incandescent Illumination ELETRIAL RATINGS: Load Sea VD ycles or 5/50VA, 60Hz Resistive 6A 5,000 Resistive 0A 50,000 Inductive 0A 5,000 Lamp 5A 5,000 Motor 0.5HP 5,000 DWV 050Vrms except across light terminals Low Level 0mV 00,000 Electrical Life: LIGHTING: Light Source Incandescent Neon LED See Rating hart Rating (VD) 6V, V, V (VA) 5V, 50V (VD) V, 6V, V, V Mechanical Life: 00,000 cycles Seal: IP6S Operating Temp Range: -0 to +5 MATERIALS: ase: Toggle: Terminals/ontact: Terminal Hardware: Mounting Hardware: Thermoplastic Stainless steel Brass, silver alloy with silver plate, gold plate for low level Screws and lockwashers provided when applicable K series recommended Quick onnect terminals: AMP 605- for -6 AWG AMP 00- for - AWG None provided Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
12 SEALED, ILLUMINATED SNAP-IN TOGGLE K SNAP-IN TOGGLES LOW OST, SNAP-IN TOGGLE FOR WET & DUSTY ENVIRONMENTS, & POLES SIDE "A".9 SIDE "" ROKER SWITHES SWITH SHOWN IN "B" POSITION TERMINAL STYLES (.0 THIK) SREW QUIK ONNET SOLDER #6- THD.0. MOUNTING OPENING: J PANEL THIKNESS RANGE OF A GASKET IS REOMMENDED PANEL THIKNESS RANGE OF W/O GASKET PANEL OPENING: MIN. TYP. MAX. WIDTH LENGTH MIN. J MAX. REFERENE PANEL UT-OUT.0 MIN. Terminal Style/ Switch Rating A. Quick onnect/ Standard B. Screw/Standard. Solder/Standard D. Quick onnect/ Low Level E. Screw/Low Level F. Solder/Low Level K X X X X X X X X Actuator Style A. Bat Handle NOTE: ontact factory for panel recommendations on switches with potting cups. Optional Panel Gasket: P/N thickness P/N thickness K onnector P/N 065 ORDERING INFORMATION K SERIES PART NUMBER ODE Switch Action/ircuit Light Type Lens olor Light/ircuit Location Legend & Orientation Position Position Position ircuit A B A. No Light Position Position A. No Light A. No Legend A. - NONE OFF SPST B. 6V Incandescent A B B. G. B. - NONE - SPDT. V Incandescent A. No Lens A. No Lens B... (-) NONE OFF SPST D. (-) NONE - SPDT D. V Incandescent B. Red B. Red E. (-) OFF (-) SPDT E. 5VA Neon. Green. Green ON in position A ON in position A F. - OFF - SPDT F. 50VA Neon D. Amber D. Amber Wired to terms & Wired to terms & D. E. G. (-) OFF - SPDT G. V Red LED E. lear E. lear. at position H. -/- NONE OFF DPST H. V Green LED Wired to terms & J. -/- NONE -/- DPDT J. V Amber LED K. (-)/(-) NONE OFF DPST K. 6V Red LED H. L. (-)/(-) NONE -/- DPDT ON in position L. 6V Green LED Wired to terms & M. (-)/(-) OFF (-)/(-) DPDT M. 6V Amber LED F. G. N. -/- OFF -/- DPDT N. V Red LED D. P. (-)/(-) OFF -/- DPDT at position A P. V Green LED Wired to terms & Q. V Amber LED H. J. R. V Red LED ON in position NOTE: ( ) denotes momentary action. at position A Wired to terms & S. V Green LED Wired to terms & T. V Amber LED E. J. NOTES: No momentary switches with dependent lights. Neon lamps only to be coded with clear or amber lenses. LED lenses must be clear or same color as LED. No legends on lamp side of switch. No dependent light in OFF positions. All legends printed on actuators without lens(es) will be white except actuator codes, F, J, M & R. All legends printed on lenses will be white except on clear lens(es) will be black. Example: KAAKEEABA specifies Q.. terminals, standard rating; bat handle; DPST two position momentary ON, maintained OFF; 5VA neon light; clear lens in positions A, no lens in position ; dependent light ON in position A, wired to terminals & ; no legend. K panel plugs available as shown on page 6. at position Wired to terms & F. ON in position A Wired to terms & ON in position Wired to terms & D = I =.5 MAX. at position A Wired to terms & at position Wired to terms & Not available in DP NOTE: LED anode (+) terminal number shown in bold. K. L. M. N. P. R. ➀ All legends are white. Legend cannot be on the same side as the lens. Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
13 K SNAP-IN TOGGLES SEALED, ILLUMINATED SNAP-IN TOGGLE K SHEMATIS K A A_ K B A_ K A_ K D A_ K E A_ K F A_ SPST - ON-NONE-OFF SHEMATI SPST - ON-NONE-ON SHEMATI SPST - (ON)-NONE-OFF SHEMATI SPDT - (ON)-NONE-ON SHEMATI SPDT - (ON)-OFF-(ON) SHEMATI SPDT - ON-OFF-ON SHEMATI K G A_ K H A_ K J A_ K K A_ K L A_ K M A_ SPDT - (ON)-OFF-ON SHEMATI DPST - ON-NONE-OFF SHEMATI DPDT - ON-NONE-ON SHEMATI DPST - (ON)-NONE-OFF SHEMATI DPDT - (ON)-NONE-ON SHEMATI DPDT - (ON)-OFF-(ON) SHEMATI K N A_ K P A_ K F B_ K F DPDT - ON-OFF-ON SHEMATI DPDT - (ON)-OFF-ON SHEMATI GENERAL SHEMATI INFORMATION INDIATES MAINTAIN ATION (FIXED POSITION) INDIATES MOMENTARY ATION (AUTOMATI RETURN POSITION) SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "" K F D_ K F E_ K F F_ K F G_ K F H_ K F J_ SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP LED IN "A" & IND LED IN "" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" & DEP LED IN "" SPDT - ON-OFF-ON SHEMATI W/IND LED IN "A" & IND LED IN "" K F B_ K F K F D_ K F E_ K F F_ K F G_ SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/IND NEON BULB IN "" SPDT - ON-OFF-ON SHEMATI W/DEP NEON BULB IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP NEON IN "A" & IND NEON IN "" K F H_ K F J_ K F B_ K F K F D_ SPDT - ON-OFF-ON SHEMATI W/IND NEON IN "A" & DEP NEON IN "" SPDT - ON-OFF-ON SHEMATI W/IND NEON IN "A" & IND NEON IN "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" K F E_ K F F_ K F G_ K F H_ K F J_ UNLESS OTHERWISE SPEIFIED DIMENSIONS ARE IN INHES. TOLERANES ARE AS LISTED. MUST BE FREE FROM BURRS AND SHARP EDGES TOLERANES.XX.0.XXX.00 ANGLES DO NOT SALE DRAWING SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" & "" SPDT - ON-OFF-ON SHEMATI W/DEP BULB IN "A" & IND BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" & DEP BULB IN "" SPDT - ON-OFF-ON SHEMATI W/IND BULB IN "A" & IND BULB IN "" Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
14 SEALED, ILLUMINATED ROKER SWITHES K5 SEALED ROKERS ATTRATIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS The OTTO K5 series is a quality, precision switch designed to comply with standards established for appliance, marine (ignition protection) and off-road vehicles along with other demanding applications where rugged rocker switches are required. K5 series sealed rocker switches snap into industry-standard panel cutouts. hoose illuminated and printed legends, thrupanel drain option and switching compatibility from low level up to 0 amps. The K5 series offers a choice of LED, incandescent and neon illumination. Legends can be stamped onto a non-illuminated button, stamped onto an illuminated lens or laser etched into the lens and backlit. Available in standard and low level contact ratings, the K5 rockers will fit a wide range of applications. Expect a minimum of 5,000 cycles at a full rated load of 0 amps resistive or 5 amps inductive. 00,000 cycles mechanical. A full complement of switch operation is available including momentary and maintained action in or -position switches in SPST, SPDT, SPTT, DPST and DPDT circuit arrangements. OTTO can provide custom colors upon request. Value-added assemblies with wire leads are also available. Please consult the factory for assistance. Features: Sealed watertight per IP6S Snap-in panel mounting into industry standard panel cutout Optional panel seal gasket LED, neon & incandescent lighting 0.50 Quick onnect terminals Optional one-piece connector Optional terminal barriers Low level up to 0 amp switch onfigurable Single Pole Triple Throw (SPTT) with external jumpers Soft Touch button available RoHS/WEEE/Reach compliant Standard haracteristics/ratings: ELETRIAL RATINGS: Load Sea Level Sea 5VA, 60/00Hz Resistive 0A 6A Inductive 5A 5A Lamp 5A 5A Motor 0VA DWV 050Vrms except across light terminals Low Level 0mV Electrical Life: LIGHTING: Light Source Incandescent Neon LED 5,000 cycles Rating (VD) 6V, V, V (VA) 5V, 50V (VD) V, 6V, V, V Mechanical Life: 00,000 cycles Seal: IP6S Operating Temp Range: -0 to +5 MATERIALS: ase: Button: Terminals/ontact: Terminal Hardware: Mounting Hardware: Raised Bars Shown Thermoplastic Thermoplastic Brass, silver alloy with silver plate, gold flash for low level K5 series recommended Quick onnect terminals: AMP 605- for -6 AWG AMP 00- for - AWG None provided ROKER SWITHES Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
15 K5 SEALED ROKERS SEALED, ILLUMINATED ROKER SWITHES SNAP-IN PANEL MOUNTING K5 SERIES PART NUMBER ODE Part Number ode ontinued Below K5 X X X X XX X X Base Options Rocker olor*/style Rocker Features Switch Action/ircuit Light Source Type Light ircuit A. With Keying Pin Only Silver Plate B. Without Barriers or Pin Silver Plate. With Terminal Barriers Only Silver Plate D. With Keying Pin Only Low Level Rating Gold Plate E. Without Barriers or Pin Low Level Rating Gold Plate F. With Terminal Barriers Only Low Level Rating Gold Plate G. With Keying Pin Only No Plate H. Without Barrier or Pin No Plate J. With Terminal Barriers Only No Plate A. Black Plastic Rocker B. Black "Soft Touch" Rocker. Red Plastic Rocker D. Red "Soft Touch" Rocker E. White Plastic Rocker F. White "Soft Touch" Rocker H. Green Plastic Rocker J. Orange Plastic Rocker K. Blue Plastic Rocker L. Gray "Soft Touch" Rocker M. Gray Plastic Rocker *Additional colors available. ontact factory. NOTE: All code combinations are not feasible. onsult factory for product availability. Position Position A. No Feature. No Feature. Lens. Lens. Raised Bars. Raised Bars. Raised Lit Bars. Raised Lit Bars NOTE: Soft Touch rockers require same color lenses/ lit bars for both positions. POS. A POS. B POS. Position Position Position ircuit A B A. - NONE OFF SPST A. -/-9 NONE OFF DPST B. - NONE - SPDT B. -/-9 NONE -/- DPDT. (-) NONE OFF SPST. (-)/(-9) NONE OFF DPST D. (-) NONE - SPDT D. (-)/(-9) NONE -/- DPDT E. (-) OFF (-) SPDT E. (-)/(-9) OFF (-)/(-) DPDT F. - OFF - SPDT F. -/-9 OFF -/- DPDT G. (-) OFF - SPDT G. (-)/(-9) OFF -/- DPDT Special ircuits Position Position Position Special A B ircuits H. -/-9-9 OFF ON/ON/OFF J. -/-9-9 NONE ON/ON/NONE K. (-)/(-9) -9 OFF (ON)/ON/OFF L. (-)/(-9) -9 NONE (ON)/ON/NONE M. -/-9 -/-9 -/- ON/ON/ON N. (-)/(-9) -/-9 -/- (ON)/ON/ON P. (-)/(-9) -/-9 (-)/(-) (ON)/ON/(ON) R. -/-9 OFF/-9 OFF/OFF ON/OFF/OFF ON/ON/OFF S. (-)/-9 OFF/-9 OFF/OFF (ON)/OFF/OFF ON/ON/OFF NOTE: ( ) denotes momentary action. A. No Illumination B. 6V Incandescent. V Incandescent D. V Incandescent E. 5VA Neon F. 50VA Neon G. V Red LED H. V Green LED J. V Amber LED K. 6V Red LED L. 6V Green LED M. 6V Amber LED N. V Red LED P. V Green LED Q. V Amber LED R. V Red LED S. V Green LED T. V Amber LED ircuit Terminal onnections A. NONE NONE B. Dep. in A (-) & (+). Dep. in (+) & 5(-) D. Ind. in A (-) & 6(+) E. Ind. in 5(-) & 0(+) F. Dep. in A (-) & (+) Dep. in (+) & 5(-) G. Dep. in A (-) & (+) Ind. in 5(-) & 0(+) H. Ind. in A (-) & 6(+) Dep. in (+) & 5(-) J. Ind. in A (-) & 6(+) Ind. in 5(-) & 0(+) NOTE: Polarity only applies to LED circuits. K5 PART NUMBER ODE - ONTINUED FROM ABOVE X X XX XX X X X Lens olor Legend Style Legend olor Legend Orientation Position A Position. Transparent Red. Transparent Red. Transparent Green. Transparent Green. Transparent Amber ➀. Transparent Amber ➀. lear ➀. lear ➀ 5. Translucent White ➁ 5. Translucent White ➁ Z. No Lens Z. No Lens NOTE: It is not recommended to use green LEDs with translucent white lenses. This will reduce light intensity. Use clear lenses with green LEDs for maximum light intensity. ➀ Recommended for neon lamps. ➁ Special Order: Ultra bright green LEDs to be used with translucent white lens. STOP HERE for lighted switches without legends. Example: K5AAFNH- Position A ZZ. No Legend Position ZZ. No Legend NOTE: For all other legend options, refer to the legend table on page 6, find the two digit code and enter the code in the appropriate position(s). Position A Position. Red. Red. Black. Black 9. White 9. White B. Backlight/ B. Backlight/ Daylight White ➂ Daylight White ➂ D. Backlight/ D. Backlight/ Deadfront ➂ Deadfront ➂ Z. No Legend Z. No Legend ➂ Only available on Rocker Style A & Rocker Features and lens color Z for each position.. Std Position A Position STOP HERE for unlighted switches without legends. Example: K5AABAA.6 ± K5 onnector P/N 05-A Without Latches P/N 05-B With Latches.06 TYP. Recommended Quick onnect Terminals AMP 605- for -6 AWG AMP 00- for - AWG Panel Seal Gasket P/N 009 K5 panel plugs available as shown on page 6. Specifications Subject To hange Without Notice sales@is-rayfast.com 5 Phone: +(0)
16 SEALED, ILLUMINATED ROKER SWITHES K5 SEALED ROKERS ATTRATIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS.95 BUTTON.96 ASE SIDE "A" SIDE "" ROKER SWITHES LABEL (.9) (.) TERMINAL ID TERMINAL BARRIER (OPTIONAL).9.5 SWITH SHOWN W/ TERMINAL BARRIERS ONNETOR KEY FEATURE OPTIONAL.5 TYP. SWITH SHOWN IN POSITION "A" LIGHT TERMINAL LOATION IND IN "A" (LED POLARITY NOTED) LIGHT TERMINAL LOATION IND IN "" (LED POLARITY NOTED) ANODE (+) ATHODE (-) ANODE (+) ATHODE (-).9 LIGHT TERMINAL LOATION IND/DEP IN "A" (LED POLARITY NOTED) LIGHT TERMINAL LOATION IND/DEP IN "" (LED POLARITY NOTED) POSITION "A" STATIONARY TERMINAL SIDE (TERMINAL NUMBERS & 9) POSITION "" STATIONARY TERMINAL SIDE (TERMINAL NUMBERS & ) OMMON TERMINALS ( & ) TERMINAL LOATIONS AS VIEWED FROM BOTTOM OF SWITH (ASE REMOVED FOR LARITY) ONTAT MADE IN OPPOSITE DIRETION OF ROKER TRAVEL MOUNTING OPENING: PANEL THIKNESS RANGE OF A GASKET IS REOMMENDED PANEL THIKNESS RANGE OF W/O GASKET PANEL OPENING: MIN. TYP. MAX. WIDTH LENGTH MAX..55 MAX. REFERENE PANEL UT-OUT.50 MIN..0 MIN. Specifications Subject To hange Without Notice sales@is-rayfast.com 6 Phone: +(0)
17 STANDARD LEGENDS STANDARD LEGENDS PER SAE SNAP-IN PANEL MOUNTING Standard Legends Per SAE Specifications STANDARD LEGENDS PER SAE SPEIFIATIONS A ANHOR K UNLOK P5 BILGE BLOWER B BATTERY L LIGHT R LIFT B ELETRI POWER L MASTER LIGHTING SWITH R LOWER A/OOLING SYSTEMS L HEADLIGHTS R UP HEADLIGHTS-LOW / DEHUMIDIFIER L R DOWN DIPPED BEAM HEATER/INTERIOR HEATING L5 HEADLIGHTS-HIGH / UPPER BEAM R5 RIGHT D WINDSHIELD DEFROSTER L6 PARKING LIGHT R6 LEFT D REAR WINDOW DEFROSTER L WORK LAMP R FWD FORWARD D MIRROR DEFROSTER L WORK LAMP R REV REVERSE E ENGINE/START L9 INTERIOR DOME LIGHT S RADIO E ENGINE/STOP M BEAON S MUTE E ON/START M HAZARD/POSITION LIGHTS T FAST E OFF/STOP M LEARANE LIGHTS T SLOW E5 ON ON M SIDE MARKER LIGHT T E6 OFF OFF M5 RUNNING LIGHTS (UNDER POWER) T TRIM TAB / TRIMMING OPERATION TRANSMISSION E ENGINE ELETRI PREHEAT M6 ANHOR LIGHT V VENTILATING / A FAN E ENGINE-GAS INJETION M RUNNING/ANHOR LIGHTS W WINDSHIELD WIPER F FRONT FOG LIGHTS M SEARH LIGHT W WINDSHIELD-WASHER F REAR FOG LIGHTS M9 LEFT TURN SIGNAL W WINDSHIELD-WASHER/WIPER G FUEL MA RIGHT TURN SIGNAL W REAR WINDOW WIPER H HORN P BILGE PUMP # W5 REAR WINDOW-WASHER H HORN REAR P BILGE PUMP # W6 REAR WINDOW-WASHER/WIPER K LOK P BILGE PUMP # ZZ NO LEGEND P BILGE PUMP For legends not shown, please consult an OTTO representative. Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
18 SEALED ROKER SWITHES U MILLION YLE ROKERS ONE MILLION YLE SEALED ROKER SWITH The U- (low level) and U- rocker switches are designed to run a minimum of one million mechanical cycles and withstand extreme environmental conditions. Ideal for use in material handling, heavy equipment, off-road and construction equipment, and other outdoor applications where severe conditions are typically encountered. These momentary action, ON-OFF-ON switches provide crisp tactile feedback and are moistureproof and dusttight to IP6. Watertight to IP6S option is also available. The optional watertight seal will withstand direct water spray and the durable construction provides protection against extreme shock and vibration. ROKER SWITHES Features: One million cycle life Moistureproof & dusttight to IP6 Optional IP6S watertight seal available Momentary action (ON-OFF-ON) risp tactile feedback Vibration & shock resistant Low level up to 0 amps switching capability RoHS/WEEE/Reach compliant Standard haracteristics/ratings: ELETRIAL RATINGS: Load Sea VD or 5VA Resistive 0A Inductive 5A Lamp A Low Level 0mV Electrical Life: 00,000 cycles Mechanical Life:,000,000 cycles Seal: IP6 or IP6S Operating Temp Range: -55 to +5 Operating Force: /-.0 lb. Reset Force: 0.5 lb. min Total Travel: 0.00 inches max Overtravel: 0.0 inches min MATERIALS: Button: Bracket: ontacts: Terminal Hardware: Mounting Hardware: Nylon black Stainless steel Silver, standard Silver, gold for low level None provided None provided Specifications Subject To hange Without Notice sales@is-rayfast.com Phone: +(0)
SEALED, ILLUMINATED ROCKER SWITCHES
K/K LOW OST, ROKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and
More informationGeneral Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
More informationRound Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
More informationGeneral Specifications
eries W lides Rotaries Programmable Illuminated P Pushbuttons upplement Accessories Indicators General pecifications Electrical apacity (Resistive Load) Power Level: 9A @ 125V A or 6A @ 250V A Other Ratings
More informationRoHS. Specifications. Part Number Configurator
RVW Series Rocker Switch Applications / Markets Floor Care Appliances Medical Equipment Electrical Houseware Specifications Commercial Appliances Home Appliances Features & Benefits Industrial Controls
More informationGeneral Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
More informationDistinctive Characteristics
Distinctive haracteristics Extremely low profile of. (.mm) from P to top of switch. Red, green, or yellow LED with spot or full face illumination. Rubber seal construction prevents contact contamination
More informationAccessories. Accessories
Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the coloured sections to assemble a complete switch. For other options or
More informationC-Series. Circuit Breaker.
-Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in
More informationTOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
More informationAHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1
Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles
More informationSorenson Lighted Controls
Sorenson Lighted Controls Illuminating Innovation 9 INDICATOR CATALOG New Products Located on Pages - Sorenson Lighted Controls Illuminating Innovation ORDER TERMS & CONDITIONS Minimum OEM Order Value:
More informationAPEM COMPONENTS LIMITED
APEM COMPONENTS LIMITED Designed and manufactured in the UK Q-Series Panel Mount LED Indicators PANEL MOUNT LED INDICATORS Apem Components, the renowned switch manufacturer, have complemented their extensive
More informationKRPA, KRP, KA, KR series
Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:
More informationSMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.
SMT TR series Surface mount tiny washable rocker switches istinctive features and specifications Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials
More informationROCKER SWITCHES B 1 SERIES 3A SPECIFICATIONS AGENCY APPROVALS
Miniature Rocker & Paddle switches HOW TO ORDER AGENCY APPROVALS C File N E195524 File N E195524 CHARACTERISTICS The most comprehensive range of terminations, brackets, toggle sizes and bushings. Dially
More informationPushbutton Switches. Sub-Miniature. Specifications: Switch Function. Page <1> 08/10/11 V1.1. : Dependent upon content material
Specifications: Contact rating : Dependent upon content material Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 20 mω initial at 2-4 V dc 100 ma for both silver and gold plated
More informationPRODUCT DESCRIPTION PAG ES. E110 Series 1PDT, 10 AMP RELAY 2-6. E310 Series 3PDT, 10 AMP RELAY E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19
Index PRODUCT DESCRIPTION PAG ES E110 Series 1PDT, 10 AMP RELAY 2-6 E310 Series 3PDT, 10 AMP RELAY 7-12 E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19 E410 / E415 Series 4PDT, 10/15 AMP RELAY 20-24 E610
More informationGeneral Specifications
Series F General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life:
More informationPrecision and High Reliability Thermostats Issue 3. Datasheet. Table of Contents
Precision and High Reliability Thermostats DESCRIPTION Thermostats can provide either temperature control or overtemperature protection by breaking electrical contact when a specified temperature is reached.
More informationPCB Relay. --- G2R-1-SN --- G2R-2-SN LED indicator with test
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE0 (VDE approval: C0 insulation grade), UL08, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according
More informationSeries 300. Miniature Rocker & Paddle Switches
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and
More informationQuick Reference Guide Gemini Series Switches
Quick Reference Guide The TE Connectivity extensive Gemini A and Gemini AE Series offer one and two poles with multi circuit configurations, including: momentary function, locking toggle to avoid unwanted
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationSECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES
Your Contact for Industrial Relays SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES SOCKET COMPATIBLE & FLANGE MOUNT RELAYS RELAY SERIES CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS
More informationSwitches & Pilot Devices
ømm - HW Series Key features: ocking lever removable contact blocks Finger-safe IP0 contacts as standard, other terminal styles available Tamperproof construction All E-stops meet EN8 and are compliant
More informationQ6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins
More informationHexa Multi Module 366HMM. Introduction. Design Specifications. Key Features
Hexa Multi Module Introduction The E-Plex 366HMM is a six channel DC power distribution module capable of handling loads of up to 15A per channel or 50A total. The six channels can be utilized as either
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationDual Reversing Module
Dual Reversing Module Introduction The E-Plex 425DRM has been designed to simplify wiring in electronic systems by providing the reversing function local to the motor devices thus eliminating long cable
More informationM = Maintained S = Spring Return. Operator Only ➊ No Contacts M M 800T-00HX2KB6 M M 800T-24HR2KB6AX 800T-24HR17KB6AX Incandescent
ulletin 800T 30.5 mm Push uttons 2-Position Knob/Lever Type Selector Switch Units, Illuminated Operator Position Operator Type Standard Knob Knob Lever Type Lamp Volts olor M = Maintained S = Spring Return
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationSPEC Pak. Sealed Power For Environmental Connections. Anderson Power Products. Marine Wind Power Lighting Transportation Pumps Ground Support
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Anderson Power
More informationCMS SLIDE SWITCHES (SMD) COPAL ELECTRONICS CMS T B FEATURES PART NUMBER DESIGNATION. RoHS compliant INTERNAL STRUCTURE.
OPAL ELETRONIS SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE 7 FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact mechanism Load life of, cycles ompatible with automatic
More informationMCHXXX. Simple to install MECHANICAL. HANDLE STROKE ± 30 (60 total travel)
DESCRIPTION The MCHXXX Control Handle is intended for open-loop control of electrohydraulic proportional valves utilizing pulse width modulated (PWM) outputs to optimize valve performance. Adjustments
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationQuick Reference Guide Tiny Pushbutton and Toggle Series Switches
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches TE Connectivity offers the Tiny line of switches in a range of ratings from 0.4VA up to 3A @125 VAC. The extensive product line includes
More informationHMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
More informationC-Series. Circuit Breaker
-Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in
More informationGeneral Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
More informationTable of Contents. Kilovac Time Delay Relays
Table of Contents 1600/1700 Series, Delay on Operate, Fixed & Adjustable......................8-2, 8-3 2400 Series, Subminiature, Delay on Operate, Fixed.............................8-4 5600/5700 Series,
More informationMIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
More informationRTBH Series 1-2 Pole Coded Rotary Switches Features/Benefits
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationPSOL. Remove mounting screws. Remove ears. Add 6" leads PSOL = #12 AWG solid PSTR = #12 AWG stranded
Switch Options Work Smarter Not Harder Arrow Hart custom configured wiring devices can match any of your complex industrial or commercial job needs, simplifying your project and maximizing your bottom
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationRT series Miniature Printed Circuit Board Relays, Sockets and Accessories
RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationKILOVAC EV200 Series Contactor With 1 Form X (SPST-NO) Contacts Rated 500+ Amps, Vdc
Product Facts Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating (500+A carry, 2000A interrupt at 320VDC) Built-in coil economizer only 1.7W
More informationMX150 Sealed Connector System
MX150 Sealed Connector System Applications The pre-assembled, submersible MX150 is a high-performance connector system for challenging, rugged and harsh applications. The innovative MX150 Sealed Connector
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationProducts Available From
Products vailable From Solid State Relays and I/O Modules atalog utomation ontrols atalog Switches and Sensors atalog Motors and Fans atalog Pneumatics atalog 5 For your copy of the catalogs, contact Tel:
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationFlammability FEATURES. Cover. Slider C S S T B
OPAL ELETRONIS OMPAT SLIDE SWITHES SS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Low-profile of mm Self-return type available RoHS compliant over Slider Housing Stainless
More information67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp
TD Series - Miniature Time Delay Relays DPDT, PDT, mp E When small size is a requirement series relays fit where others won t. The miniature ice cube timers are capable of handling up to amps. Typical
More informationDisplay Lights. Display Lights. LT1 Series. LT1 Series SignaLight Light Towers. Display Lights with a Tower of Advantages
LT1 Series SignaLight Light Towers with a Tower of Advantages Key features of the LT1 series SignaLight towers include: ustom configurations meet your specifications simply Select your flash preference,
More informationTable of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationonlinecomponents.com
MATERIAL SPEIFIATIONS: ontacts Gold over nickel or silver plate ase Material Thermoplastic V-0 Terminals/Fixed ontacts.tin lead plate Terminal Seal...Epoxy on single pole, optional on double pole Process
More informationEAO Product Information. Series 84
EAO Product Information Series Switches and Indicators Switches and Indicators Index Series Description Page 539 Product Assembly Page 540 Mounting Instruction Page 541 Product Range - pushbuttons for
More informationLED Neon Light Round
LED Neon Light Round Part #: NEON -P RND HB 24VDC WHT lc con cab LED Neon Light Round SPECIFICATION 36 21.5 19.5 HORIZONTAL BEND 46.5 CST Length CST Custom Length 3 cuttable every 3.25 Operating Voltage
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More informationCMS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION CMS T B. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated Flammability
More informationTECHNICAL PRODUCT DATASHEET
FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR OEM DISTRIBUTION ONLY TECHNICAL PRODUCT DATASHEET High Density PDM 21 Output / 10
More informationS-1000A/2000A ROTARY CODED SWITCHES S A W FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
ROTARY ODED SWITHES S-A/A RoHS compliant INTERNAL STRUTURE S-A / A series FEATURES Part name Housing ontact Terminal pin Base O ring Material Polybutyleneterephthalate opper alloy, Gold-plated Polybutyleneterephthalate
More informationINSTALLATION INSTRUCTIONS 480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery COMPARTMENT
480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery PARTMENT 4-5/8 [117mm] 1-3/4 [44mm] 4X HOLES 4-5/8 [117mm] 4X INTEGRAL PINS BATTERY PARTMENT ACCESS COVER BLACK ABS MATERIAL BOX EQUIPPED FOR WIRED OR WIRELESS
More informationGeneral Specifications
General pecifications Electrical apacity (Resistive Load) Low Level: 00mA maximum @ 2V Other Ratings ontact Resistance: Insulation Resistance: ielectric trength: Mechanical Life: Electrical Life: Nominal
More information800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)
1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description
More informationPCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Fully sealed construction. Unique moving
More informationPCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More informationLegacy Printed Circuit Board & Reed Relays. Catalog
Legacy Printed Circuit Board & Reed Relays Catalog 2017 Contents Series Overview....................................................3 117SIP Relays.....................................................4
More informationSMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationPower Distribution Blocks with Short-Circuit Current Ratings
Power Distribution Blocks with Short-Circuit Current Ratings General Information: The requirements of the 005 National Electric Code (NEC) and UL508A now require many electrical panels to carry a Short
More informationINSTALLATION AND OPERATING INSTRUCTIONS MODEL SIVF. KB Part No Signal Isolator for KBVF Controls. See Page 1 Pending
INSTALLATION AND OPERATING INSTRUCTIONS MODEL SIVF KB Part No. 9474 Signal Isolator for KBVF Controls See Page 1 Pending See Safety Warning on Page 1 The information contained in this manual is intended
More information4600 INSTALLATION INSTRUCTION W/ 2190
1 STILE PREPARATION DOOR VERTIAL L STRIKE PREPARATION ALUMINUM FRAME.218 1.594 5/32" OFFSET (SEE STEP-8) 1 1/4" RIVNUT INSTALLATION FOR SINGLE OR DUAL LEVERS ON ALUMINUM STILE 5/32" OFFSET (SEE STEP-9)
More informationRT series Miniature Printed Circuit Board Relays, Sockets and Accessories
s 查询 RT40 供应商 捷多邦, 专业 PC 打样工厂,4 小时加急出货 RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets
More informationModel Number Structure
General-purpose Relay G2RS-(S) Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
More informationRT T Rack Mount Test T
RT T Rack Mount Test T Switch ALIATION RT switch assemblies for rack and switchboard mounting permit convenient isolation of switchboard relays, meters and instruments. RT racks allow quick and easy multi-circuit
More informationIP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications Illuminated or non-illuminated UG1212-A-R1 Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL
More informationSmartZone-2 & SmartZone-4
SmartZone-2 & SmartZone-4 Quick-Start Guide UPDATED 2011-7-26 This guide is intended to give the installer a brief set of instructions about how to set up the XCI Zoning SmartZone System. For more detailed
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More informationMX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
More informationHigh-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 1988 Elenco Electronics, Inc. Revised 2002 REV-K 753110 DT-100 PARTS LIST If you are a student,
More informationLegacy Printed Circuit Board & Reed Relays. Catalog
Legacy Printed Circuit Board & Reed Relays Catalog 2017 Contents Series Overview....................................................3 117SIP Relays.....................................................4
More informationSectional Terminal Blocks
General Information: Sectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the block producing the required
More informationPD140FNT60QMU-02C. Through Beam. Main features. Description
Through eam Description The PD140 sensor consists of an emitter, which sends out invisible, infrared light, and a receiver, capable of detecting the light from the emitter. The sensor is encapsulated in
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationRelays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection
RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications
More informationDESCRIPTION CHARACTERISTICS FEATURES DIMENSIONS. Molded DIP Reed Relays. Germany # ++49-(0) , USA #
DESRIPTION The DIP series is a very compact design having a low profile package and a high profile package. This series is compatible with all DIP relays. HARATERISTIS FEATURES High resistance option available
More informationJDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
More informationSection. Display Lights Selection Guides... C 2. SignaLight Towers 70mm LT7 Modular Series... C 4 56mm LT1 Series...
Section New Selection Guides... 2 SignaLight Towers 70mm LT7 Modular Series...... 4 56mm LT1 Series.............. 7 Panel Mounting Annunciators SL30 Series, 1.18" (30mm)... 14 SL30-IPS Series 1.18" (30mm)
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
More informationMT5C/8C Ø56mm / Ø85mm Steady & Flashing with Buzzer
MT5/8 Ø56mm / Ø85mm Steady & Flashing with uzzer TOWER LIGHTS Incandescent or Optional bulbs available Selectable Steady or Flashing Modes Prism-cut lenses for even light distribution Surface, or Wall
More informationG6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
More informationTT, Tiny Toggle Switch
TT, Tiny Toggle Switch Features Compact design Vertical and horizontal right angle versions available Typical performance characteristics Contact configuration..........................., and pole Contact
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For Chevrolet Silverado 1500HD & 2500 Kit 68162 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of
More information