Round Indicator Lights Mounting Hole Page
|
|
- Ambrose Parsons
- 5 years ago
- Views:
Transcription
1
2
3 PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7. x. 9 &.8 x.7 Rear Mount Indicators Mounting & Varies with Lens Additional Items Lamps & 's Technical Marking Department All SoLiCo products are RoHS Agency Approvals: The majority of our indicators carry Agency approvals. Please contact us for the latest Agency information for the specific series and voltages you require. RoHS REACH SoLiCo Facilities Hartford, Connecticut Brownsville, Texas Matehuala, Mexico TUV Information IEC 98--:979+A:987 IEC 98-:8 EN:98--:989 EN:98-:8+A:9 UL Information File # E7(M) Catalog. Sept
4 Round Indicators Series 8,, Press fits into." panel hole, incandescent, and neon illumination Three lens styles available 8 Series wire leads Body Material: Lens Material: Bezel Material: Wire Gauge:.9. Nylon Polycarbonate Brass (Plated) 8 ga.. Wire Strip: /" Terminals:.87 Tabs Panel Thickness:." min Certifications: Contact Us.. Series wire leads with metal bezel Series tab terminals Ø." Dia " Wire.87 Tabs None Bright Flush Translucent Flush Diamond High Translucent, High Rings Dome Translucent, Dome Rings Clear is Translucent Clear is Transparent Lens Flush. Lens High Lens Dome.. Series 8 Only. Bezel Required. Translucent Lens is not recommended for use with. Specify. Series only. neon not available on Series Sorenson Lighted Controls, Inc (8) 7-9
5 Series 9 Press fits into." panel hole Body and lens are one piece construction, incandescent, and neon illumination Body & Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /" Panel Thickness:." min Certifications: Contact Us Round Indicators.7... Ø." Dia " Wire None Semi-Dome Cylinder Dome Clear Specify Lens Lens Lens Sorenson Lighted Controls, Inc (8) 7-9
6 Round Indicators Series, Snap fits into." panel hole Body and lens are one piece construction, incandescent, and neon illumination Series Body & Lens Material: Polycarbonate Terminals:.87 Tabs Wire Gauge: 8 ga. Wire Strip: /" Panel Thickness:." to." max Certifications: Contact Us.9... Series....7 Ø." 8 " Wire 87 Tabs None Semi-Dome Diamonds Dome Plain Clear Lens Lens Lens. Specify color. Components provided in leads when Series is specified with lamp codes -. Available with (V) and incandescent lamps only, contact factory for additional information. Sorenson Lighted Controls, Inc (8) 7-9
7 Series Snap fits into.7" panel hole Body and lens are one piece design, incandescent, and neon illumination Three lens styles available Splashproofproof Body & Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /" Panel Thickness:." to.9" max Certifications: Contact Us Round Indicators... Ø.7" Dia. 8 " Wire None Semi-Dome Rings Dome Plain Clear Lens Lens Lens. Specify. Requires components in wire leads Sorenson Lighted Controls, Inc (8) 7-9
8 Round Indicators Series Fits into.7 panel hole, incandescent, and neon illumination Sealed, NEMA -R Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: 8 ga. Wire Strip: /" Terminals:.87 Tabs Panel Thickness:." to." Certifications: Contact Us. /8- Thread.".. (max. nut torque: ozs/in).. Ø.7" Dia...7 Alternate " Wire.87 Tabs Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Flush Lens w/tapered Bezel Clear Yellow Clear Yellow 8 Marked A B C D E F H. Translucent Lens not recommended for use with. Specify. Wire Leads only. Bright Bezel only, use code Sorenson Lighted Controls, Inc (8) 7-9
9 Series 8, 9 Fits into." panel hole, incandescent, and neon illumination Many lens styles available 8 Series wire leads press fit 8 with lens Body Material: Lens Material: Bezel Material:..8 Nylon Polycarbonate Stainless Steel or Plated Brass.9 Wire Gauge: 8 ga. Wire Strip: /" Panel Thickness:." to.9 Certifications: Contact Us. Round Indicators Series wire leads snap fit 9 with 8 lens... Ø." Series Lamp Termination Base Bezel Lens " Wire Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Bright Bezel only, use code Sorenson Lighted Controls, Inc (8) 7-9 7
10 Round Indicators Series Snap fits into." panel hole, incandescent, and neon illumination Many lens styles available Series Body Material: Nylon Lens Material: Polycarbonate Bezel Material: Stainless steel or plated brass Terminals:.87 or. Tabs Panel Thickness:." to.9" Certifications: Contact Us with 8 lens.... Ø Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Bright Bezel only, use code 8 Sorenson Lighted Controls, Inc (8) 7-9
11 Series Snap fits into." panel hole Body and lens are one piece design, incandescent, and neon illumination Splashproof Body & Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /" Terminals:.87 or. Tabs Panel Thickness:." to.9 Certifications: Contact Us with 7 lens Round Indicators with 9 lens.9 Ø." Dia " Wire.87 Tabs. Tabs None Bright Semi-Dome Rings Semi-Dome Rings w/ Bezel Clear Lens 7 Lens 8 w / bezel Lens 9. Specify. Lens 7 and 9 only. Bright - Lens 8 only Sorenson Lighted Controls, Inc (8) 7-9 9
12 Round Indicators Series 7 Fits into." panel hole, incandescent, and neon illumination Sealed, NEMA -R Body & Lens Material: Polycarbonate Bezel Material: Stainless steel or plated brass Terminals:.87 or. Tabs Panel Thickness:." to." Certifications: Contact Us Ø.... (Typ) (max. nut torque: ozs/in). Alternate Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent Clear Clear Marked A B C D E F Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Bright Bezel only, use code Sorenson Lighted Controls, Inc (8) 7-9
13 Series 8 Snap fits into." panel hole, incandescent, and neon illumination Many lens styles available Splashproof Body Material: Lens Material: Bezel Material: Wire Gauge: Polycarbonate Wire Strip: /" Polycarbonate Terminals:.87 or. Tabs Stainless Steel or Panel Thickness:." to.9 Plated Brass Certifications: Contact Us ga. Shown with lens 8 Round Indicators Ø " wire.87 Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Bright Cylinder Translucent Cylinder Translucent Cylinder Translucent Small Dome Translucent Small Dome Lines Large Dome Translucent Large Dome Lines Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel Cap, (FC) Translucent, Cap, (FC) Transparent Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify. Bezel not available. Wire Leads only. Bright Bezel only, use code Sorenson Lighted Controls, Inc (8) 7-9
14 Round Indicators Series Fits into.9" panel hole Threaded mount cluster lighting Daylight Visible Supplied w/ hex nut, lock washer and gasket Sealed, NEMA -R Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /"..8 Terminals:.87 or. Tabs Panel Thickness:." to.87 Certifications: Contact Us.8 /"-. (max. nut torque: lbs/in). Ø.9 Alternate Ø.9 8 " Wire.87 Tabs. Tabs None Semi-Dome Translucent Semi-Dome Rings Semi-Dome Rings w/ Diffuser A Clear, Yellow 8 is Translucent Clear is Transparent Light Output (mcd) k typ. k typ. 7k typ. k typ. Yellow 8k typ. Lens..7. uced Intensity. Daylight Visible 's may require ESD handling. Specify color Sorenson Lighted Controls, Inc (8) 7-9
15 Series Fits into.9" panel hole Threaded mount cluster lighting Daylight Visible Supplied w/ hex nut, lock washer and gasket Splashproof Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: ga. Wire Strip: /". min.8 Terminals:.87 or. Tabs Panel Thickness:." to.87 Certifications: Contact Us (max. nut torque: lbs/in) Round Indicators. /- Ø.9 Mounting Hole.89. Ø.9 Alternate 8 " Wire.87 Tabs. Tabs Matte Matte Faceted Dome Translucent Faceted Dome Transparent Faceted Dome Transparent w/ Diffuser A is Translucent Light Output (mcd) k typ. k typ. 7k typ. k typ. Yellow 8k typ..7.7 Lens. uced Intensity. Daylight visible 's may require ESD handling. Translucent only. only Sorenson Lighted Controls, Inc (8) 7-9
16 Series,, Series - mm size Series & - mm Press Fit Body Material: Wire Gauge: Certifications: Nylon Series - ga., /8" Strip Series / - ga., / " strip Contact Us Indicators Series Series Series ,, " Wire Diffused Clear Water Clear Yellow 8 Ø.7 Ø. Contact factory with your specific requirements Series / Series. For voltages greater than V the appropriate external resistor will be provided in the lead. Not available on Series Sorenson Lighted Controls, Inc (8) 7-9
17 Series, 7 Series - mm size Series 7 - mm Threaded body - secured with lockwasher & nut or Bright finish Body Material: Wire Gauge: Brass (Plated) Series - ga. Series 7 - ga. Wire Strip: /8" Certifications: Contact Us Series Series 7 Series 7 Series Ø. Ø. Ø. Ø.9 Ø Ø. Ø. Ø..9. Indicators 7 8 " Wire Dome Recess 7 8 Bright Diffused Clear Water Clear Yellow 8 Ø. Ø. Contact factory with your specific requirements Series 7 Series. s greater than V require components in lead wire(s) Sorenson Lighted Controls, Inc (8) 7-9
18 Series Snap fits into." x." panel cutout Incandescent and neon illumination Two lens styles available Suggested for High Temperature applications Two termination styles available Body Material: Phenolic Lens Material: Polycarbonate Terminals:. Tabs Panel Thickness:. to. Certifications: Contact Us Rectangular Indicators 8 9. Tabs Screws Brown None.7. Standard Plain Faceted Plain....8 Clear.8. Standard Lens Faceted Lens Panel Cutout.. Sorenson Lighted Controls, Inc (8) 7-9
19 Series Snap fits into." x." panel cutout, incandescent and neon illumination Matte Dummy (hole plugs)available Body Material: Nylon Lens Material: Polycarbonate Terminals:. Tabs Panel Thickness:. to.87 Certifications: Contact Us DUMMY 9. Tabs Panel Cutout Flush Translucent Flush Frost Clear Clear Plain 7 Marked A B C D E F Rectangular Indicators.. is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify Sorenson Lighted Controls, Inc (8) 7-9 7
20 Series, 7 Snap fits into." x.8" panel cutout Incandescent and neon illumination Single or dual lenses Dummy (hole plugs) available Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: 8 ga. Terminals:.87 &. Tabs, Solder Lugs Panel Thickness:. to. Certifications: Contact Us Panel Cutout..8 Rectangular Indicators 7 8 DUMMY 9.87 Tabs. Tabs Solder Std. Matte Matte Series Series 7 Single Translucent Single Diamond Single Fine Diamond Dual Translucent Dual Fine Diamond 7 7 Clear Clear Plain 7 Marked A B C D E F..7.. Series 7 Select nd lens color Flush lens style Dual lens style is Translucent Clear is Transparent 8 Sorenson Lighted Controls, Inc (8) 7-9
21 Series,, 7 Snap fits into panel cutout Incandescent and neon illumination Single or dual lenses Dummy (hole plugs) available Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: 8 ga. Terminals:. Tabs, Solder Lugs Panel Thickness:. to. Certifications: Contact Us DUMMY 9 " Wire. Tabs Solder Matte Matte None Stainless Rectangular Translucent Rectangular Diamond Rectangular Line Square Translucent Square Diamond Square Lines & 7 Panel Cutout Series.. Clear Clear Plain 7 Marked A B C D E F Rectangular Indicators Panel Cutout Series & 7. Series & 7 Select nd lens color. is Translucent Clear is Transparent. Series and only Sorenson Lighted Controls, Inc (8) 7-9 9
22 Series, Snap fits into.8 x.7 panel cutout Incandescent and neon illumination Many lens styles available Dummy (hole plugs) available Body Material: Nylon Terminals:.87 or. Tabs Lens Material Polycarbonate Panel Thickness:. to. Wire Gauge: 8 ga. Certifications: Contact Us Wire strip /" Rectangular Indicators 8 DUMMY 9 " Wire.87 Tabs. Tabs Matte Matte None Stainless Series Lenses Rectangular Translucent Rectangular Plain Rectangular Diamond Rectangular Frost Rectangular Lines Series Lenses Rectangular Translucent Rectangular Diamond Rectangular Frost Rectangular Lines Clear Clear Plain 7 Marked A B C D E F Panel Cutout.8 Series Select nd lens color.7 is Translucent Clear is Transparent Sorenson Lighted Controls, Inc (8) 7-9
23 Series, Lens mounts from front, indicator from behind panel Incandescent and neon illumination Series has wire leads only Series available with wire leads or tab terminals Body Material: Nylon Lens Material: Polycarbonate Wire Gauge: Series - ga Series - 8 ga Wire Strip: /" Terminals:.87 Tabs or. Tabs Panel Thickness: Certifications: Contact Us Series Series " Wire.87 Tabs. Tabs. Dia Rings.7 Dia Rings Rectangular Lines No Lens No Lens No Lens 9 9 Clear.7 Lens 9 mounting hole.8" dia Lens mounting hole. " dia. Lens mounting hole.9" x." Ø.8. DIA. Lens 9 Ø..8 DIA. Lens. If Ordered without lens, lens style must still be specified, Pattern and color are "". Nominal range. Alternate lenses (style ) are available to fit thicker panels. Please consult factory. Series only.. Lens.9. Panel Cutout Rear Mount Indicators Sorenson Lighted Controls, Inc (8) 7-9
24 Lamps & 's Neon Lamps (AC) Neon lamps are constructed of a glass envelope, containing two electrodes and a mixture of inert gases. When a voltage is applied, above the "breakdown" voltage, the gas between the electrodes ionizes, creating the familiar orange-red "glow". They are rugged, reliable, cost effective and generate little heat. While light output is lower than incandescent lamps, neons are the most widely used light sources for indicators used at line voltages. Normally lighting with a red-orange glow, neons are also available in both green and blue by using special gasses and phosphorescent coatings inside the glass envelope. All neon lamps require a current limiting resistor in series with the lamp. The value of this resistor is determined by Catalog Volts Life Hours Number V, V, V, V, V, V, Please Note: All neon illuminated indicator lights ordered with a green lens will be provided with a green neon lamp; blue lenses will be provided with a blue neon lamp. three criteria: the manufacturer s specified operating characteristics, the desired brightness, and the required lamp life. While neon lamps have a typical life of, hours, this is directly proportional to the operating current. Higher current gives greater brightness, but shorter life. Although suited to both AC and DC operation, life when operated on DC is approximately % that of AC operation. Incandescent Lamps (AC/DC) Incandescent lamps are best known for their bright white light output. When an electrical current is passed through the filament, it glows white hot" creating light. The tradeoff in incandescent lamps is their susceptibility to physical shock and vibration, as the filament becomes very fragile at its elevated operating temperatures. We recommend mounting the indicator away from any vibration source, and / or cushioning the lamp within the indicator assembly with a resilient potting compound. Catalog Number Volts Size Amps Life Hours.V T - ¾., V T - ¾., V T - ¾.8, 9 8V T - ¾., Incandescent lamps can also generate significant heat, which should be considered in your application. Similar to neon lamps, operating an incandescent lamp at less than rated current will significantly increase its useful life. Using a volt incandescent lamp in a volt circuit will reduce the light output by about %, but will increase its life by a factor of four. Potting for Incandescent lamps is standard. s (DC) Note: Daylight Visible 's require ESD handling Light Emitting Diodes, or s as they are more commonly known, are cousins to the semiconductor devices like transistors and integrated circuits, and are fabricated with similar processes. The color of the is determined by the combination of materials used during the fabrication process. 's are now available in a wide variety of colors including white, and in intensities approaching that of incandescent lamps. Bi-color s are available in several color combinations. s are available in three primary styles; water clear lens for highest brightness but smallest viewing angle, color clear lens for increased viewing angle at a somewhat reduced light output, and color diffused lens for the widest viewing angle at greater reduction in light output. Light output for s is measured in millicandellas (mcd) and is specified by minimum and typical values. s are DC (direct current) devices, although SoLiCo can provide a number of our products configured to use s as AC (alternating current) devices. S: Due to rapidly changing technology, not all devices listed in our catalog may be available as described. We reserve the right to supply the closest equivalent device in appearance and performance. Please contact us to discuss your specific indicator requirements. We have the experience and technical knowledge to find your solution. Sorenson Lighted Controls, Inc (8) 7-9
25 Technical Material Wire length tolerance is: ± ¼" on leads less than " ± ½"; leads " to " ± " on leads greater than " Strip length tolerance is: ± ¹ " maximum operating temperature is: 7 C Housing Materials High-Temperature Nylon (bases) Polycarbonate (lenses & bases) Chemical Resistant Nylon ( Series only) Imprinting Hot Stamping Hot stamping uses a heated metal die, engraved with the required legend, under pressure to force ink into a plastic surface, offering excellent durability. Hot stamping is normally done in black or white, and is best suited to text and simple line art. If no ink color is specified, hot stamping will be done in black, and the orientation of the imprint will be horizontal. Hot stamp charges are "per imprint", which is defined as a marking applied in one operation. The tooling charge for a Hot Stamp Die (not already available) is $8. per die. Minimum quantity is pieces. A set-up charge of $. will apply to quantities of less than pieces per legend. Pad Printing Pad printing (also known as transfer printing), uses a soft rubber pad to pick up ink from an engraved plate and transfers it to the part to be marked. Pad printing is normally done in black or white, but can be done in any color for which ink is available. If no ink color is specified, white ink will be used. Text and images can be very accurately reproduced with this method. For additional durability in abrasive or high-wear applications, a clear overcoat can be applied over the marking. Pad print charges are "per hit", which is defined as a marking applied in one operation. The artwork and plate charge for a Pad Print Plate (not already available) is $8.. Depending on size and complexity, multiple legends can be accommodated on a single plate, please contact the sales department for details. Minimum quantity is pieces per legend. A set up charge of $. will apply to quantities of less than pieces. Marking Orientation Operating Temperature C C C UL Rating 9V- 9V- Nominal operating temperature listed. Specific temperatures vary according to material thickness. Please consult factory. Horizontal Lens Horizontal Legend Vertical Lens Vertical Legend Vertical Lens Horizontal Legend Series 7 Standard Orientation HORIZONTAL V E R T I C A L HORIZ PRINT Sorenson Lighted Controls, Inc (8) 7-9
26 Marking Department Pad Printing SoLiCo has the capability of pad printing on almost any of our product surfaces. Pad printing, sometimes referred to as transfer printing, is especially well suited for curved or irregular surfaces. Our equipment can produce high resolution results on convex, concave, and flat caps as well as all lenses and most switch accessories. We can produce a variety of text and custom symbols. If a specific symbol or word is not available we can produce the cliché to accommodate almost any request that can physically fit on the product surface. Standard ink color is white, black is optional, and custom ink colors are available as special purchase options. Hot Stamp Hot stamping, while one of the oldest technologies, still offers a cost-effective permanent marking. A heated die, with the image to be marked, and a special foil (ribbon) are pressed onto a plastic surface, depositing the "ink" into the surface. Hot stamping is best suited for text, and low-resolution graphics. As the pigment is actually "melted" into the surface, it provides excellent durability, and good visual contrast. Yag Laser SoLiCo's most recent addition to our marking department is our YAG Laser. It is a high-power, high-speed unit with the ability to produce extremely highresolution graphics. It has a " x " stage, allowing multiple parts to be marked with a single set-up. Depending on the base material, it is suitable for direct imaging, or using an opaque overcoat, producing a reverse-image style of marking. Sorenson Lighted Controls, Inc (8) 7-9
27
28
Sorenson Lighted Controls
Sorenson Lighted Controls Illuminating Innovation 9 INDICATOR CATALOG New Products Located on Pages - Sorenson Lighted Controls Illuminating Innovation ORDER TERMS & CONDITIONS Minimum OEM Order Value:
More informationHMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
More informationQ6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins
More informationBulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
More informationEAO Product Information. Series 84
EAO Product Information Series Switches and Indicators Switches and Indicators Index Series Description Page 539 Product Assembly Page 540 Mounting Instruction Page 541 Product Range - pushbuttons for
More informationHMI Components. Series. Flush design Raised design PCB (with adaptor) Indicator Pushbutton Illuminated pushbutton
Edition /204 HMI Components 8 Series Characteristics The compact 8 mm Series 8 is especially suited for: Flush design Raised design PCB (with adaptor) Functions The Series 8 incorporates the following
More informationIP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications Illuminated or non-illuminated UG1212-A-R1 Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationSensor Accessories Retroreflectors and Retroreflective Tape 8-2
- Retroreflectors and Retroreflective Tape PG.05E.17.T.E Retroreflectors Contents Overview.................... - Model Selection............... -3 Dimensions.................. -3 High Quality Retroreflectors
More informationGeneral Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationA BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES
A BASIC UNDERSTANDING OF LED LIGHTING FOR MINIATURES Why use LEDs for miniature lighting? There has been a growing interest in the use of LEDs (Light Emitting diodes) for lighting in miniatures. I feel
More informationTOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
More informationAPEM COMPONENTS LIMITED
APEM COMPONENTS LIMITED Designed and manufactured in the UK Q-Series Panel Mount LED Indicators PANEL MOUNT LED INDICATORS Apem Components, the renowned switch manufacturer, have complemented their extensive
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationAHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1
Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles
More informationMISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
More informationTable of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationA W - A 2A R - 24D - 1
Knob-type Selector Switch A165S/W Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cul approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5
More informationSPEC Pak. Sealed Power For Environmental Connections. Anderson Power Products. Marine Wind Power Lighting Transportation Pumps Ground Support
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Anderson Power
More information800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)
1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More information550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4
5.97 [.235] 3.0 [.118] 5mm LED CBI Circuit Board Indicator Sloped Back Housing, Quad Block 2.97 [.117] Features.35 [.250].35 [.250] 25 [.984] ID RECOMMENDED P.C. HOLE PATTERN 4.9 [.185] A Red Cathode for
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 1988 Elenco Electronics, Inc. Revised 2002 REV-K 753110 DT-100 PARTS LIST If you are a student,
More information550-xx07. 5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs x x Features
5mm LED CBI Circuit Board Indicator Sloped Back Housing with Standoffs 550-xx07.10 [.240] 3.0 [.118] 3.8 [.145].10 [.240] 4.83 [.190] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color 5.21
More informationChapter 23 Study Questions Name: Class:
Chapter 23 Study Questions Name: Class: Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. 1. When you look at yourself in a plane mirror, you
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationINSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
More informationMounting Hardware Guide
Mounting Hardware Guide by The key to a successful and trouble-free installation is the selection of appropriate mounting hardware. Versa-Gard offers the most comprehensive array of mounting hardware for
More informationForm 4: Integrated Science Notes TOPIC NATURAL AND ARTIFICIAL LIGHTING
Form 4: Integrated Science Notes TOPIC NATURAL AND ARTIFICIAL LIGHTING OBJECTIVES: 1. Define natural and artificial lighting. 2. Use of fluorescent and filament lamps. 3. Investigation of white light and
More informationType PLC Fitting. Valve for Continuous control. Diaphragm valve. Output
Digital Inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationUnit 8: Light and Optics
Objectives Unit 8: Light and Optics Explain why we see colors as combinations of three primary colors. Explain the dispersion of light by a prism. Understand how lenses and mirrors work. Explain thermal
More informationData Sheet for Angle Sensors
ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming
More informationBasic Lighting Terms Glossary (Terms included in the basic lighting course are italicized and underlined)
Basic Lighting Terms Glossary (Terms included in the basic lighting course are italicized and underlined) Accent Lighting Directional lighting to emphasize a particular object or draw attention to a display
More informationCowVac Installation Instructions
Spalding Laboratories Spalding Laboratories, Inc. PO Box 10000, Reno, NV 89510 dd9ee.spalding-labs.com info@spalding-labs.com Technical Support 1-800-955-6576 CowVac Installation Instructions Copyright
More information550-xx mm LED CBI. Circuit Board Indicator Square Back Housing, Tri-Block x x x 3
5mm LED CBI Circuit Board Indicator Square Back Housing, Tri-Block 5.9 [.235] 3.8 [.145] Features 2.99 [.118].35 [.250].35 [.250] 18.4 [.734].35 [.250] RECOMMENDED P.C. HOLE PATTERN 4.83 [.190] A Red Cathode
More informationFASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
More informationSolenoid Data Book 1425 Lake Avenue Woodstock, IL Phone: (815) Toll Free: Sales Fax: (815)
Solenoid Data Book publication v 01.03.001 1425 Lake Avenue Woodstock, IL 60098 Phone: (815) 334-3600 Toll Free: 800-762-0369 Sales Fax: (815) 337-1756 www.guardian-electric.com email: infoge@kelcomail.com
More informationIDEC LUMIFA Family LED Lighting Solutions
IDEC LUMIFA Family LED Lighting Solutions LUMIFA Lighting your way For over two decades, IDEC has produced LEDs for applications requiring indicator lights and signaling towers. Which is why it was a natural
More informationExterior Decor LIGHTING. Bulkheads. architectural lighting. See our Bulkhead family sizes. Over 50 styles to choose from.
LIGHTING FC Lighting is known for it s family-size products and custom manufacturing capabilities, both are unique in adding vslue to our customers. Specification is made easier choosing various sized
More informationLED Neon Light Round
LED Neon Light Round Part #: NEON -P RND HB 24VDC WHT lc con cab LED Neon Light Round SPECIFICATION 36 21.5 19.5 HORIZONTAL BEND 46.5 CST Length CST Custom Length 3 cuttable every 3.25 Operating Voltage
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationLGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
More informationLowlighter KLV Volt Die-Cast Brass, MR16 Halogen revision 2/25/14 kl_klv275_spec.pdf. Ravenna TM. Specifications. Approvals: Type: Job:
Catalog number: and Finish Options: See page 2 : See pages 3-5ˇ Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast brass with die-cast cover, stainless steel fasteners and stainless steel
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationCX-20 SERIES. General purpose photoelectric sensor with full basic performance. Compact Photoelectric Sensor OTHER SUNX PRODUCTS
OTHER SUNX PRODUCTS CX- SERIES Compact Photoelectric Diagnosis Self-diagnosis PNP output Light intensity Interference type available monitor prevention Amplifier Built-in UL Recognition General purpose
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Assembly and Instruction Manual Elenco
More information5 Watt LED Light Bulb - A19 Style Replacement for 60 Watt Incandescent E26 Light Bulbs
5 Watt LED Light Bulb - A19 Style Replacement for 60 Watt Incandescent E26 Light Bulbs Part #: LED-A19-5W-E26 The Larson Electronics LED-A19-5W-E26 5 Watt LED A19 Style Bulb is designed to fit in standard
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationThru-beam Sensors. Model SM800 Series. Ideal for small object detection
Model SM800 Series MICROSONIC Thru-beam Sensors Ideal for small object detection Extremely reliable thru-beam sensing in a smaller package and ranges up to 1016 mm (40") They are miniature in size, powerful
More informationIonization (gas filled) tubes
Ionization (gas filled) tubes So far, we've explored tubes which are totally "evacuated" of all gas and vapor inside their glass envelopes, properly known as vacuum tubes. With the addition of certain
More informationAccessories. Accessories
Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the coloured sections to assemble a complete switch. For other options or
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationIMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
IMPORTANT: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE 005-07 Cadillac STS Classic 3D Z, Classic Dual Weave, Classic Mesh & Classic Black Mesh Grilles B 7 HR 3 STS Classic 3D Z Grille Part
More informationMEMBRANE SWITCH DESIGN OPTIONS
MEMBRANE SWITCH DESIGN OPTIONS Membrane switch technology has become a reliable front panel solution where environmental concerns or frequent cleaning are an issue. The sealed nature of the technology
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationComplete units: Push-buttons ø 22mm
Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More informationComplete units: Mushroom heads ø 22mm
Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationcaroma marc newson shower mixer
caroma marc newson shower mixer PLUMBERS INSTALLATION INSTRUCTIONS IS1215A(07/12) Important Information Brazed connections should NOT be made directly onto the mixer, as excessive heat will cause permanent
More informationIlluminated Components Portfolio
Illuminated Components Portfolio PRIME PRODUCTS, INC PRIME PRODUCTS, INC. 2755 Remico, S.W., Wyoming, MI 49519 T 616.531.8970 F 616.301.0033 info@primeproductsinc.com www. primeproductsinc.com 1 At Prime
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationCALRAD 25 series - potentiometers
25 series - potentiometers audio /linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 2" dia. fits into 1 4" hole. Shaft 3 16" dia. Thread length 7 32", shaft length
More informationOvertravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationAnalog indicators. 1/2 Regulations and standards. 1/4 Technical descriptions
1/2 Regulations and standards 1/4 Technical descriptions 1/7 Rectangular indicators for direct current or voltage 1/7 96 x 48 mm and 48 x 96 mm with moving-coil movement 1/10 144 x 72 mm and 72 x 144 mm
More informationUtensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides
Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and
More informationPOWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )
POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s success.
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationBullet EL Volt Die-Cast Aluminum, PAR38 Incan. / Halogen / R40 Incan. revision 8/15/11 el220.pdf
Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Housing: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth
More informationIndustrial Areamaster Generation 2 HL LED Luminaire Floodlight for Ordinary Locations
Industrial Areamaster Generation HL LED Luminaire Type R,, X Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production facilities Warehouses Processing
More informationMINIATURE RELAY FOR WIDER APPLICATIONS
TÜV Rheinland HJ MINIATURE RELAY FOR WIDER APPLICATIONS HJ RELAYS FEATURES contact arrangements Form C (for A 0 V AC), Form C (for 0 A 0 V AC)* Excellent contact reliability by Au plating Environmentally
More informationOperating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationand signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights
Characteristics 1 Environment Protective treatment Standard version TH Ambient air temperature Storage C - 40 + 70 around the device Operation C - 25 + 70 for LED and neon bulb versions - 25 + 40 for incandescent
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationProject: Client: Part #: NEON -P FLT HB 24VDC WHT lc con cab. Date: Qty:
LED Neon Light Flat Part #: NEON -P FLT HB 24VDC WHT lc con cab LED Neon Light Flat SPECIFICATION 27.5 19.5 HORIZONTAL BEND 46.5 CST Standard Snap Connector shown. Dimensions in millimeters See connections
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More informationILFORD SPORTSVIEW PROJECTOR INSTRUCTION BOOK
ILFORD SPORTSVIEW PROJECTOR INSTRUCTION BOOK Now that you're the owner of a new Sportsview Projector, you'll want to begin using it right away. The Sportsview Projector is extremely simple to operate,
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationControl stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M
Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More information1.3. Pushbuttons and Indicating Lights.
.3 Pushbuttons and Indicating Lights Pushbutton Control Stations Contents Page Features.............................. V7-T-5 Product Selection M22 Assembled Control Stations........ V7-T-6 Commercial Control
More informationMX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
More informationSMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
More informationRSB-RCS/L SERIES The RSB-RCS/L Series rectangular shoebox is offered in a variety of lighting distributions with sharp cutoff to meet the challenging demands of today s site lighting projects. Fixture
More informationComplete units: Selector switches ø 22mm
Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More information6MM ALLEN KEY FOR ROOF CLIPS PHILLIPS HEAD BIT FOR SCREWS FOR DOOR FRAME SPIRIT/LASER LEVEL TO LEVEL THE UNIT
1 TOOLS REQUIRED: MOVING CART/DOLLY FOR TRANSPORTING PANELS, ROOF, AND POSTS TWO 9 FT. STEP LADDERS FOR INSTALLING ROOF & PANELS MINI REVERSIBLE RATCHET 1/4 DRIVE FOR CORNER SCREWS ON TOP TRAVERSE BEAMS
More informationDraw-Bar Spare Parts JANUARY 2019
Draw-Bar Spare Parts The Diamond Chase Draw-Bar Frame will last you a life time. The frame is guaranteed watertight for life. Replacement draw bars, bolts, and the nylon locking rod are available as needed.
More informationAssembly and Installation Instructions for White Oak Audio Design PL700B LED board
Thank you for purchasing White Oak Audio Design s Phase Linear PL700B Upgrade LED Light Board. White Oak Audio Design products are meticulously engineered and tested to ensure a direct drop in fit with
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More information