Sorenson Lighted Controls

Transcription

1 Sorenson Lighted Controls Illuminating Innovation 9 INDICATOR CATALOG New Products Located on Pages -

2 Sorenson Lighted Controls Illuminating Innovation ORDER TERMS & CONDITIONS Minimum OEM Order Value: $. Minimum Distributor Order Value: $. Piece Line Item Minimum for Standard Products, For Products Payment Terms: Net Days (with approved credit) Scheduled Orders: Full order quantity must be scheduled when order is placed. Minimum order quantity for scheduled releases is, pieces per line item. Minimum release quantity is pieces. Changes to scheduled quantities or release dates may incur additional charges or delays in production. Orders in production may not be rescheduled. We reserve the right to over - or under-ship by % of order or scheduled release quantities. Returns for defective materials are accepted after receipt of samples, and issuance of a Return Material Authorization (RMA) Number. RMAs are valid for days, and all returns must be accomplished within that time frame. All parts must be in the original packaging. Order Acknowledgments with our Sales Order number are issued to confirm order quantity, pricing, scheduled ship dates. Please review them. If you need to call to check the status of an order, please have our Sales Order number available. SoLiCo s sales and engineering personnel will help you determine the best indicator for your application, or help you with a custom design. As our products may be used in a wide variety of applications, the final responsibility in determining the suitability of our products for a specific application rests with you. It may be possible to build a part number from this catalog that cannot be manufactured. We have included information for each series noting construction limitations. Certain constructions may require components in the lead wires. Incandescent Lamps / Potting: We strongly recommend potting for all incandescent lamp applications, especially where vibration is a factor. See page for additional information. We reserve the right to make changes to our products, without prior notice, to improve performance or take advantage of new technologies. The limit of our responsibility under these circumstances is to maintain product fit, function and performance. Wire length tolerance is: ± ¼ on leads less than ± ½ on leads to ± on leads greater than Strip length tolerance is: ± S: Due to rapidly changing technology, not all devices listed in our catalog may be available as described. We reserve the right to supply the closest equivalent device in appearance and performance. Sorenson Lighted Controls Illuminating Innovation 7 Locust Street Hartford, CT T F

3 Visit for the latest product information PRODUCT SERIES PAGE Round Indicator Lights 8, & &... 8 & , &... 9 & 7... (NEW) 8... (NEW) KF... (NEW) KE... Rectangular Indicator Lights & 7..., & &... & 7, 9 &... ity Products RF (Unsealed) Flex-Lite... RF (Sealed) Flex-Lite... Rear Mount Indicators, &... 8 Additional Items Mounting Clips & Custom Assemblies... 7 Technical Information...-8 All SoLiCo products are RoHS Agency Approvals: The majority of our indicators carry Agency approvals. Please contact us for the latest Agency information for the specific series and voltages you require. RoHS SoLiCo Facilities: Hartford, Connecticut Brownsville, Texas Matehuala, Mexico Catalog. January 9 UL Information File # E7(M) TUV Information EN:98- EN:98--

4 8, & Press fits into." panel hole, incandescent, and neon illumination Three lens styles available Body Material: Bezel Material: Wire Gauge: Nylon Brass (Plated) 8 ga. Wire Strip: /" Terminals:.87 QC Panel Thickness:." min Certifications: See Page 8 Series wire leads.... Series wire leads..9.. Series tab terminals.9.9.." DIA. MOUNTING HOLE X X X X X " Wire 87 Tabs X None Chrome Flush Translucent, Flush Diamond High Translucent, High Rings Dome Translucent, Dome Rings Clear is Translucent Clear is Transparent Lens Flush Lens High. Lens Dome.. Series 8 Only. Bezel Required. Translucent Lens is not recommended for use with. Specify if applicable. Components provided in leads when lens is specified with lamp codes through. Series only Sorenson Lighted Controls, Inc (8) 7-9

5 , Snap fits into." panel hole Body and lens are one piece design, incandescent and neon illumination Body Material: Wire Gauge: 8 ga. Wire Strip: /" Panel Thickness:." to." min Certifications: See Page Series.9... Series....." DIA. MOUNTING HOLE X X X X X 8 " Wire 87 Tabs X None Semi-Dome Diamonds Cylinder Rings Dome Plain Clear Lens Lens Lens. Specify color if applicable. Components provided in leads when Series is specified with lamp codes through. Available with (V) and incandescent lamps only, contact factory for additional information.. Available with Wire Leads only. Sorenson Lighted Controls, Inc (8) 7-9

6 9 Press fits into." panel hole Body and lens are one piece design, incandescent and neon illumination Body Material: Wire Gauge: ga. Wire Strip: /" Panel Thickness:." min Certifications: See Page.7..." DIA. MOUNTING HOLE. X X X X X " Wire X None Semi-Dome Cylinder Dome Clear Lens Lens Lens. Specify color if applicable Sorenson Lighted Controls, Inc (8) 7-9

7 Snap fits into.7" panel hole Body and lens are one piece design, incandescent, and neon illumination Three lens styles available Splashproof Body Material: Wire Gauge: ga. Wire Strip: /" Panel Thickness:." to.9" Certifications: See Page....7" DIA. MOUNTING HOLE X X X X X 8 " Wire X None Cylinder Rings Semi-Dome Rings Dome Plain Clear Lens Lens Lens. Specify if applicable. Requires components in wire leads Sorenson Lighted Controls, Inc (8) 7-9

8 8 & 9 Fits into." panel hole, incandescent, and neon illumination Many lens styles available Body Material: Bezel Material Nylon Stainless Steel or Plated Brass Wire Gauge 8 ga. Wire Strip: /" Panel Thickness:." to.9 Certifications: See Page 8 Series wire leads 8 with lens with 8 lens. 9 Series wire leads." DIA. MOUNTING HOLE.. X X X X X " Wire X Lens 7 Lens 8 Lens 9 Lens None Stainless Chrome.9 Cylinder Translucent,.9 Cylinder Diamond.9 Cylinder Rings. Cylinder Translucent,. Cylinder Diamond. Cylinder Rings. Cylinder Translucent,. Cylinder Diamond. Cylinder Rings Small Dome Translucent, Small Dome Lines Large Dome Translucent, Large Dome Rings Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel, Cap, (FC) Translucent Cap, (FC) Transparent Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify if applicable. Polished Bezel only use code. Bezel required. Bezel not available Sorenson Lighted Controls, Inc (8) 7-9

9 Fits into." panel hole, incandescent, and neon illumination Many lens styles available Body Material: Nylon Bezel Material Stainless Steel or Plated Brass Panel Thickness:." to.9 Certifications: See Page with lens X X X X X Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Chrome.9 Cylinder Translucent, 7.9 Cylinder Diamond 7.9 Cylinder Rings 7. Cylinder Translucent, 8. Cylinder Diamond 8. Cylinder Rings 8. Cylinder Translucent, 9. Cylinder Diamond 9. Cylinder Rings 9 Small Dome Translucent, Small Dome Lines Large Dome Translucent, Large Dome Rings Semi Dome Translucent, Semi Dome Rings Flush Lens w/tapered Bezel, Cap, (FC) Translucent Cap, (FC) Transparent Clear Clear Plain Marked A B C D E F Lens Lens Lens Cap is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify if applicable. Polished Bezel only use code. Bezel required. Bezel not available Sorenson Lighted Controls, Inc (8) 7-9 7

10 Snap fits into." panel hole Body and lens are one piece design, incandescent, and neon illumination Splashproof Body Material: Wire Gauge: ga. Wire Strip: /" Panel Thickness:." to." Certifications: See Page with 7 lens with 9 lens.9.9 X X X X X " Wire.87 Tabs. Tabs X None Chrome Semi-Dome Rings Semi-Dome Rings w/ Bezel Cylinder Rings Clear..9.. Lens 9 Lens 7 & 8. Specify if applicable. Available with lens 8 only 8 Sorenson Lighted Controls, Inc (8) 7-9

11 Threaded mount cluster lighting Daylight visible Splashproof design Supplied w/ hex nut, lockwasher, and gasket Body Material: Wire Gauge: Nylon ga. Wire Strip: /" Panel Thickness:." to." Certifications: See Page..8 Ø. Panel Cutout /"- (max. nut torque: lbs./in). Optional Double "D" Hole Ø.9 Ø.9 X X X X X 8 " Wire.87 Tabs. Tabs None Semi-Dome Translucent Semi-Dome Rings Semi-Dome Rings w/ Diffuser Faceted Dome Translucent Faceted Dome Faceted Dome w/ Diffuser A A Clear Yellow, 8 is Translucent Clear is Transparent Light Output (mcd) k typ. k typ. 7k typ. k typ. Yellow 8k typ. Ø.7. Lens. uced Intensity. Transparent. Specify color for clear lens. Translucent only. Lens only. Only. Lens.7 Sorenson Lighted Controls, Inc (8) 7-9 9

12 Snap fits into." x." panel cutout Neon & incandescent illumination Two lens styles available Suggested for High Temperature applications Two termination styles available Body Material: Phenolic Panel Thickness:." to." Certifications: See Page X X X X X 8 9. Tabs Screws Brown None Standard Plain Faceted Plain Clear Standard Lens Faceted Lens Sorenson Lighted Controls, Inc (8) 7-9

13 Snap fits into.9" x." panel cutout Incandescent and neon illumination Dummy (hole plugs) available Body Material: Wire Gauge: 8 ga. Panel Thickness:." to.9" Certifications: See Page X X X X X 8 DUMMY 9 " Wire.87 Tabs. Tabs X None Rectangular Translucent Rectangular Diamond 7 7 Clear Plain 7 Clear Marked A B C D E F is Translucent Clear is Transparent. Metal Bezel Sorenson Lighted Controls, Inc (8) 7-9

14 , 7, 9, : To be discontinued; limited availability Body Material: Bezel Material Nylon Plated Steel Wire Gauge: 8 ga. Panel Thickness:." to.9" Certifications: See Page Discontinued 9 Discontinued. X X X X X X " Wire.87 Tabs. Tabs Solder X Chrome & 7 Series Lenses High Translucent High Diamond Low Translucent Low Plain Low Diamond Low Frost 9 & Series Lenses Low Translucent Low Diamond Low Frost Clear Clear Plain Marked A B C D E F. Lens Lens. Lens.7 Series 7 Repeat selection from lens color choices above Consult factory Panel Cutout: /9 -.8" x.7" 7/ -.8" x.8" Lens colors specified left to right and / or top to bottom is Translucent Clear is Transparent Sorenson Lighted Controls, Inc (8) 7-9

15 Snap fits into." x.8" panel cutout Body and lens are one piece design Incandescent and neon illumination Body Material: Wire Gauge: 8 ga. Wire Strip /" Panel Thickness:." to." Certifications: See Page X X X X X 8 9 " Wire.87 Tabs X Rectangular Translucent Rectangular Frost 7 7 Clear Plain Clear Marked A B C D E F is Translucent Clear is Transparent Sorenson Lighted Controls, Inc (8) 7-9

16 , Snap fits into.7" x.8" panel cutout Incandescent and neon illumination Many lens styles available Dummy (hole plugs) available Body Material: Wire Gauge: Nylon 8 ga. Wire Strip /" Panel Thickness:." to." Certifications: See Page X X X X X X 8 DUMMY 9 " Wire.87 Tabs. Tabs X Matte Matte None Stainless Series Lenses Rectangular Translucent Rectangular Plain Rectangular Diamond Rectangular Frost Rectangular Lines Series Lenses Rectangular Translucent Rectangular Diamond Rectangular Frost Rectangular Lines Clear Clear Plain 7 Marked A B C D E F Series Repeat selection from lens color choices above is Translucent Clear is Transparent Sorenson Lighted Controls, Inc (8) 7-9

17 Snap fits into." x." panel cutout, Incandescent, and neon illumination Matte Dummy (hole plugs) available Body Material: Nylon Panel Thickness:." to.87" Certifications: See Page X X X X X 8 DUMMY 9. Tabs Flush Translucent Flush Frost Clear Clear Plain 7 Marked A B C D E F is Translucent Clear is Transparent. Translucent Lens is not recommended for use with. Specify if applicable Sorenson Lighted Controls, Inc (8) 7-9

18 , 7 Snap fits into.8 x." panel cutout Incandescent and neon illumination Single or dual lenses Dummy (hole plugs) available Body Material: Wire Gauge Nylon 8 ga. Panel Thickness:." to." Certifications: See Page Series - Standard Base Series - Standard Base Series - Optional Base X X X X X X 7 8 DUMMY 9.87 Tabs. Tabs Solder Std. Optional X Matte Matte Single Translucent Single Diamond Single Fine Diamond Dual Translucent Dual Fine Diamond 7 7 Clear Plain 7 Clear Marked A B C D E F Series Series Flush lens style Dual lens style. Series 7 Repeat selection from lens color choices above is Translucent Clear is Transparent Sorenson Lighted Controls, Inc (8) 7-9

19 ,, 7 Snap fits into panel cutout Incandescent and neon illumination Single or dual lenses, many combinations available Dummy (hole plugs) available Body Material: Wire Gauge Nylon 8 ga. Panel Thickness:." to." Certifications: See Page & 7 X X X X X X 7 8 DUMMY 9 " Wire. Tabs Solder X Matte Matte None Stainless Rectangular Translucent Rectangular Diamond Rectangular Line Square Translucent Square Diamond Square Lines Clear Plain 7 Clear Marked A B C D E F Panel Cutout:." x."." x." 7." x." Series & 7 Repeat selection from lens color choices above is Translucent Clear is Transparent. Series and only Sorenson Lighted Controls, Inc (8) 7-9 7

20 ,, & Lens mounts from front, indicator from behind panel Incandescent and neon illumination Series has wire leads only Series has tab terminals only Series available with wire leads or tab terminals Body Material: Wire Gauge Nylon Series - ga. Series - 8 ga. Wire Strip: /" Panel Thickness:." to.78" Certifications: See Page Series tab terminals Series wire leads REF Series wire leads or tab terminals X X X X X 8 9 " Wire.87 Tabs. Tabs X. Dia Rings.7 Dia Rings Rectangular Lines No Lens No Lens No Lens 9 9 Clear Lens 9 mounting hole.8" dia Lens mounting hole. " dia. Lens mounting hole." x.9".7. DIA..8 DIA... Lens 9 Lens Lens. If Ordered without lens, lens style must still be specified, Pattern and color are "".. Nominal range. Alternate lenses (style ) are available to fit thicker panels. Please consult factory.. Not Available on Series. Not Available on Series 8 Sorenson Lighted Controls, Inc (8) 7-9

21 ,, Series - mm size Series & - mm size Press fit Body Material: Nylon Wire Gauge: Series - ga., 8" strip Series / - ga., ½" strip Certifications: See Page.8.. X X X X X 8,, " Wire X Diffused Clear Water Clear Yellow 8 Series Mounting hole.7" dia & Series Mounting hole." dia. For voltages greater than V the appropriate external resistor will be provided in the lead.. Subject to availability.. Not available on Series.. Water clear blue only Sorenson Lighted Controls, Inc (8) 7-9 9

22 , 7 - mm or 7 - mm Threaded body - secured with lockwasher & nut or chrome finish Body Material: Brass (Plated) Wire Gauge Series - ga. Series 7 - ga. Wire Strip: /8" Series Series 7 Series Ø. Series 7 Ø. Ø. Ø. Ø.9 Ø.9 Ø. Ø X X X X X 7 8 " Wire X Dome Recess 7 8 Chrome Diffused Clear Water Clear Yellow 8 Series - mm size mounting hole." Series 7 - mm size mounting hole.". s greater than V require components in lead wire(s). Subject to availability. Water clear blue only Sorenson Lighted Controls, Inc (8) 7-9

23 NEW 8 Snap fits into." panel hole, incandescent, and neon illumination Many lens styles available Body Material: Bezel Material: Stainless Steel or Plated Brass Panel Thickness:." to.9" Certifications: See Page Shown with lens 8..9 X X X X X " wire.87 Tabs. Tabs Lens 7 Lens 8 Lens 9 Lens None Stainless Chrome.9 Cylinder Translucent, 7.9 Cylinder Diamond 7.9 Cylinder Rings 7. Cylinder Translucent, 8. Cylinder Diamond 8. Cylinder Rings 8. Cylinder Translucent, 9. Cylinder Diamond 9. Cylinder Rings 9 Small Dome Translucent, Small Dome Lines Large Dome Translucent, Large Dome Rings Semi Dome Translucent, Flush Lens w/tapered Bezel, Cap, (FC) Translucent Cap, (FC) Transparent Clear Clear Plain Marked A B C D E F Lens Lens Lens is Translucent Clear is Transparent..... Translucent lens is not recommended for use with Specify color if applicable Polished bezel only use code Bezel required Bezel not available Sorenson Lighted Controls, Inc (8) 7-9

24 NEW KF Mounts in mm panel hole Hex nut + panel seal supplied Three lens styles available Housing: PBT w/ % glass Lens: Diffuser: POM (polyacetal) Hex Nut: Certifications: See Page Screws.. Tabs Wires /.9. X X X X X KF 8 " Wire. Tabs Clamp Screws None Tapered (w/diffuser) Semi-Dome, Rings Flat Top (w/diffuser) AB AC AD Yellow 8 AC AB AD. Sorenson Lighted Controls, Inc (8) 7-9

25 NEW KE mm mounting hole mm ultra-bright Supplied with nylon hex nut Body Material: Nylon (UL 9V-) Nut Material: Nylon (UL 9V-) Terminal Material: Nickel over Brass Operating Temp: - C to +8 C Certifications: See Page mm. Ø.78 Ø /8-.7 Nut.9 Ø.9. X X X X X KE 8. Tabs Translucent Water Clear Pure P Viewing Angle Light Output (mcd) 7 P.. Pure Only Sorenson Lighted Controls, Inc (8) 7-9

26 NEW Flex-Lite Mounting: Unsealed - M double back tape Sealed - Mounting/Termination accessories available All measurements in inches Cut length every.9" Operating Temp: Unsealed: Sealed: - C to +8 C Flexible PC Board Surface Mount Components Housing - Silicone Rubber Over Flex Circuit Sealed Unsealed RGB Sealed RGB Unsealed Series Leads Length Packaging X X X X X RF 8 Unsealed Sealed U S Length inch L Yellow Pure RGB 8 P M Length In Inches 9 ( Reel) Reel Cut Assembly R C A for cutting and assembly instructions See Next Page Sorenson Lighted Controls, Inc (8) 7-9

27 NEW Flex-Lite Flex-Lite Unsealed + -/".9" 9. mm. TYP.. -. RED." +.7 SOLDER PADS. BLACK - Tolerance ± ½" Flex-Lite Sealed /".9" 9. mm... RED." +.7 SOLDER PADS. BLACK - Tolerance ± ½" Single Accessories RGB Accessories RG-WIRCAP RG-ENDCAP RG-MTGUNO RG-WIRRGB RG-ENDRGB RG-MTGRGB Viewing Angle Light Output (mcd) 7 Pure See Previous Page Sorenson Lighted Controls, Inc (8) 7-9

28 Lamps & s Neon Lamps (AC) Neon lamps are constructed of a glass envelope, containing two electrodes and a mixture of inert gases. When a voltage is applied, above the "breakdown" voltage, the gas between the electrodes ionizes, creating the familiar orange-red "glow". They are rugged, reliable, cost effective and generate little heat. While light output is lower than incandescent lamps, neons are the most widely used light sources for indicators used at line voltages. Normally lighting with a red-orange glow, neons are also available in both green and blue by using special gasses and phosphorescent coatings inside the glass envelope. Incandescent Lamps (AC/DC) Incandescent lamps are best known for their bright white light output. When an electrical current is passed through the filament, it glows white hot creating light. The trade-off in incandescent lamps is their susceptibility to physical shock and vibration, as the filament becomes very fragile at its elevated operating temperatures. We recommend mounting the indicator away from any vibration source, and / or cushioning the lamp within the indicator assembly with a resilient potting compound. Incandescent lamps can also generate significant heat, which should be considered in your application. Similar to neon lamps, operating an incandescent lamp at less than rated current will significantly increase its useful life. Using a volt incandescent lamp in a volt circuit will reduce the light output by about %, but will increase its life by a factor of four. s (DC) Catalog Number Volts Life Hours V, V, V, V, V, V, Please Note: All neon-illuminated indicator lights ordered with a green lens will be provided with a green neon lamp; blue lenses will be provided with a blue neon lamp. All neon lamps require a current limiting resistor in series with the lamp. The value of this resistor is determined by three criteria: the manufacturer s specified operating characteristics, the desired brightness, and the required lamp life. While neon lamps have a typical life of, hours, this is directly proportional to the operating current. Higher current gives greater brightness, but shorter life. Although suited to both AC and DC operation, life when operated on DC is approximately % that of AC operation. Catalog Number Volts Size Amps Life Hours.V T - ¾., V T - ¾., V T - ¾.8, 9 8V T - ¾., Light Emitting Diodes, or s as they are more commonly known, are cousins to the semiconductor devices like transistors and integrated circuits, and are fabricated with similar processes. The color of the is determined by the combination of materials used during the fabrication process. 's are now available in a wide variety of colors including white, and in intensities approaching that of incandescent lamps. Bi-color s are available in several color combinations. s are available in three primary styles; water clear lens for highest brightness but smallest viewing angle, color clear lens for increased viewing angle at a somewhat reduced light output, and color diffused lens for the widest viewing angle at greater reduction in light output. Light output for s is measured in millicandellas (mcd) and is specified by minimum and typical values. s are DC (direct current) devices, although SoLiCo can provide a number of our products configured to use s as AC (alternating current) devices. The technology of s is evolving very rapidly these days, to the point that any specifics we print in our catalog may be obsolete or superceded almost immediately. Please contact us to discuss your specific indicator requirements. We have the experience and technical knowledge to find your solution. Material Specifications Operating Temperature UL Rating High-Temperature Nylon (bases) C 9V- (lenses and bases) C 9V- Sorenson Lighted Controls, Inc (8) 7-9

29 Mounting Clips T ¾ Mounting Hole." dia T ¾ Mounting Hole." dia Part Number S- T ¾ Mounting Hole." dia Part Number S- T Mounting Hole.7" dia Clip mounts from panel front, from rear for bottom only. Part Number S- Part Number S- Imprinting Hot Stamping Hot stamping uses a heated metal die, engraved with the required legend, under pressure to force ink into a plastic surface, offering excellent durability. Hot stamping is normally done in black or white, and is best suited to text and simple line art. If no ink color is specified, hot stamping will be done in black, and the orientation of the imprint will be horizontal. Hot stamp charges are "per imprint", which is defined as a marking applied in one operation. The tooling charge for a Hot Stamp Die (not already available) is $8. per die. Minimum quantity is pieces. A set-up charge of $. will apply to quantities of less than pieces per legend. Pad Printing Pad printing (also known as transfer printing), uses a soft rubber pad to pick up ink from an engraved plate and transfers it to the part to be marked. Pad printing is normally done in black or white, but can be done in any color for which ink is available. If no ink color is specified, white ink will be used. Text and images can be very accurately reproduced with this method. For additional durability in abrasive or high-wear applications, a clear overcoat can be applied over the marking. Pad print charges are "per hit", which is defined as a marking applied in one operation. The artwork and plate charge for a Pad Print Plate (not already available) is $8.. Depending on size and complexity, multiple legends can be accommodated on a single plate, please contact the sales department for details. Minimum quantity is pieces per legend. A set up charge of $. will apply to quantities of less than pieces. Marking Orientation Horizontal Lens Horizontal Legend Vertical Lens Vertical Legend Vertical Lens Horizontal Legend Series 7 Standard Orientation HORIZONTAL V E R T I C A L HORIZ PRINT Sorenson Lighted Controls, Inc (8) 7-9 7

30 Marking Department Pad Printing SoLiCo has the capability of pad printing on almost any of our product surfaces. Pad printing, sometimes referred to as transfer printing, is especially well suited for curved or irregular surfaces. Our equipment can produce high resolution results on convex, concave, and flat caps as well as all lenses and most switch accessories. We can produce a variety of text and custom symbols. If a specific symbol or word is not available we can produce the cliché to accommodate almost any request that can physically fit on the product surface. Standard ink color is white, black is optional, and custom ink colors are available as special purchase options. Hot Stamp Hot stamping, while one of the oldest technologies, still offers a cost-effective permanent marking. A heated die, with the image to be marked, and a special foil (ribbon) are pressed onto a plastic surface, depositing the "ink" into the surface. Hot stamping is best suited for text, and low-resolution graphics. As the pigment is actually "melted" into the surface, it provides excellent durability, and good visual contrast. YAG Laser SoLiCo's most recent addition to our marking department is our YAG Laser. It is a high-power, high-speed unit with the ability to produce extremely highresolution graphics. It has a " x " stage, allowing multiple parts to be marked with a single set-up. Depending on the base material, it is suitable for direct imaging, or using an opaque overcoat, producing a reverse-image style of marking. 8 Sorenson Lighted Controls, Inc (8) 7-9

31 Value Added & Custom Lighting Assemblies SoLiCo offers extensive value added services as well as the ability to design custom assemblies to meet your specific requirements. Pictured here are just a few of the value added products and custom lighting assemblies SoLiCo has produced for our customers. SoLiCo value added services include, but are not limited to, special length and color wire leads, lead termination, hot stamping and pad printing of legends, custom colored lenses, variety of neon, incandescent, and voltages and ratings and the fabrication of wire harnesses. SoLiCo also builds a variety of and neon flashers. SoLiCo excels in the development and production of value-added and custom products with one of the shortest lead times in the industry. Our engineering department uses an advanced D CAD system which can provide drawings, via or fax, to our customers, in order to expedite the design review process of your project. Call our sales department to discuss what SoLiCo can do for your next lighting project. Sorenson Lighted Controls Illuminating Innovation 7 Locust Street Hartford, CT T F

32 Other SoLiCo Products Sorenson Lighted Controls Illuminating Innovation 7 Locust Street Hartford, CT T F No.. /9 Printed in USA