Section. Display Lights Selection Guides... C 2. SignaLight Towers 70mm LT7 Modular Series... C 4 56mm LT1 Series...

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Section. Display Lights Selection Guides... C 2. SignaLight Towers 70mm LT7 Modular Series... C 4 56mm LT1 Series..."

Transcription

1 Section New Selection Guides... 2 SignaLight Towers 70mm LT7 Modular Series mm LT1 Series Panel Mounting Annunciators SL30 Series, 1.18" (30mm) SL30-IPS Series 1.18" (30mm) 22 SL40 Series, 1.57" (40mm) for more information on this product family visit Additional Web Resources New and updated product information Downloadable software demos & upgrades Part configuration tool & cross reference Online stock check & ordering IDE field sales & distributor search Online literature request Downloadable manuals & AD drawings Manufacturer s suggested retail price list Product training schedule & locations Advertising & trade show schedules Press releases & FAQs

2 Selection Guide Selection Guide Signalight Towers 70mm LT7 56mm LT1 Page 4 7 Description Features Nominal Voltage LED Steady or Flashing Light with Buzzer Ultra bright LEDs Fast and easy assembly Optional adjustable alarm olor-coded wiring terminals Only nine modular components with 5 lens colors & 4 bases units 24V D, V A Incandescent or LED Steady or Flashing Select your flash preference, lens colors, base, number of tiers, mounting style, and voltage Replace the bulbs independently; there is no need to disassemble the entire unit Heat- and shock-resistant polycarbonate lenses hoice of metallic base or cost-saving plastic base olor-coded wires make assembly and wiring easy 12V A/D, 24V A/D, 120V A, 240V A (incandescent only) Lamp Style Lens LED Modules BA15D lamp base Lens olors Red, Amber, Green, Blue, White Red, Yellow, Green, Blue, White Degree of Protection IP65 IP20 (for indoor use only) Mounting L-angle bracket with pole Base-mount bracket with pole Wall mount bracket Base mount with pole L-angle bracket with pole NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit; install in an upright position Optional Pole Height 282mm (11.10 ) 273mm (10.75") Lens Diameter 70mm (2.75 ) 56mm (2.20") Ratings/Approvals File No. E File No. E USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

3 Selection Guide Selection Guides, continued SL Series Panel Mount Annunciators 1.18" (30mm) SL30-IPS 1.18" (30mm) SL " (40mm) Page Full Voltage Full Voltage Appearance Features Illumination Face Size Light Source Illumination olors Input Type/ Voltage Termination Approvals Transformer ert. No. B Available with integrated control unit pushbuttons and key switches ustom-built, multiple combination windows ustom illumination color combinations Optional legend engraving Style F: 1.181" x 1.181" (30 x 30mm) Style H: 1.181" x 2.362" (30 x 60mm) Style L: 1.181" x 3.543" (30 x 90mm) Style V: 2.362" x 1.181" (60 x 30mm) Style G: 2.362" x 2.362" (60 x 60mm) LED cluster or bayonet base incandescent (1W) Style F: 1.575" x 1.575" (40 x 40mm) Style H: 1.575" x 3.150" (40 x 80mm) Style L: 1.575" x 4.724" (40 x 120mm) Style V: 3.150" x 1.575" (80 x 40mm) LED cluster or screw base incandescent (2W) LED: Amber, Blue, Green, Red, Yellow, White, Red/Green 2-color alternate* Incandescent: Amber, Blue, Green, Red, Yellow, White LED: Full voltage: 6, 12, 24V D Transformer: 120V, 240V A D-D converter: 110V D Incandescent: Full voltage: 6.3, 18, 24, 30V D Transformer: 120V, 240V A (50/60Hz) M3.5 screw with captive sems plate (M3 screw check terminals or applicable units) UL Recognized File No. E68961 Transformer SA ertified File No. LR ABS American Bureau of Shipping * Red/Green 2-color alternate available in 24V LED only. USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -3

4 Signalight Towers 70mm LT7 Series Light Towers Easily build or modify the combination that works for you! The LT7 light tower combines innovative LED technology with modular style assembly. This enables the towers to meet the extensive requirements seen in most status indicating applications. The simple design uses only 9 modular components to make a five color tower complete with alarm and flashing functions. Using the latest and brightest LEDs in the LT7 product range provides brilliant illumination for all the lens colors. The unique prism cut design enhances the brightness and ensures outstanding levels of visibility from any direction and distance. Key features of the LT7 series light towers include: 70mm diameter Ultra bright LEDs Unique interlocking construction Fast and easy assembly Optional adjustable alarm Lead-free design IP65 environment protection, NEMA 4, 4X, 13 olor-coded wiring terminals Only nine modular components with 5 lens colors & 4 base units UL/c-UL Listed, E marked File #E Part Numbers Part Numbers: Base Units Voltage Steady Flashing 24V D LT7B-D24 LT7B-D24FB V A LT7B-A250 LT7B-A250FB Base unit comes with top cap. Part Numbers: Lens/LED Module olor Part Number RED LT7A-R AMBER/YELLOW LT7A-Y GREEN LT7A-G BLUE LT7A-S LEAR/WHITE LT7A USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

5 Signalight Towers LT7 Specifications Base Units LT7B-D24 LT7B-D24FB LT7B-A250 LT7B-A250FB Specifications Operation/Function Steady Flashing/Steady Steady Flashing/Steady Rated Voltage 24V D 90~250V A (50/60Hz) Operating Voltage ±10% (21.6~26.4V) 90~250V A (50/60Hz) Alarm Alarm 1* Alarm 2** Alarm 1* Alarm 2** urrent onsumption 50±10mA 24±10mA 50±10mA 24±10mA Power onsumption 1.2±0.25W 0.58±0.25W 1.8±0.25W 1.3±0.25W Alarm Sound Level Max 90±5dB (at 1m) 90±5dB (at 1m) Min 70dB or less (at 1m) 70dB or less (at 1m) Flashing ycle 60±12 flashes per minute 60±12 flashes per minute Operating Temperature Range -30 ~ ~+55 Mounting Upright, indoor only Upright, indoor only Protection IP65, NEMA 4, 4X, 13 IP65, NEMA 4, 4X, 13 Weight 250g 280g 310g 340g Open ollector PNP/NPN NPN LED Units LT7A-R LT7A-Y LT7A-G LT7A-S LT7A- Specifications 1. *Alarm 1: continuous sound 2. **Alarm 2: intermittent sound LED Unit olor Red Amber/Yellow Green Blue lear/white Rated Voltage Operating Voltage 24V D ±10% (21.6~26.4V) urrent/power 52mA/1.25W 42mA/1.0W Operating Temperature Range Weight Operates with all voltage base units listed on previous page. -30 ~+60 60g Ultra-bright LEDs olor oded Wiring Terminals Accessories & Replacement Parts LT9Z-7T LT9Z-7L LT9Z-SZ007 LT9Z-HLT7 LT9Z-M4NUTSLT7 LT9Z-ORINGLT7 mounting pole with base mount mounting pole with L-angle bracket wall mounting bracket replacement top cap (1 piece) M4 mounting nuts (1 piece) O-ring gasket (1 piece) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -5

6 Signalight Towers Wiring Examples LT7B-D24FB LT7B-A250FB LT7B-D24FB 24V D V A No.1 Red LED unit Red No.2 Orange LED unit Amber No.3 Green LED unit Green No.4 No.5 No.6 No.7 Blue White Gray Black LED unit Blue LED unit lear/white Buzzer 1 Buzzer 2 No.8 Yellow OM No.9 Gray Flashing OM No.10 Black Power supply for flashing Recommended electric wire Solid wire: mm Stranded wire: mm 2 (AWG 22-18) Fuse 1A External contact for continuous light and buzzer External contact for flashing Power supply No.1 Red LED unit Red No.2 Orange LED unit Amber No.3 Green LED unit Green No.4 Blue LED unit Blue No.5 White LED unit lear/white No.6 Gray Buzzer 1 No.7 Black Buzzer 2 No.8 Yellow OM No.9 Gray Flashing OM No.10 Black Power supply for flashing Recommended electric wire Solid wire: mm Stranded wire: mm 2 (AWG 22-18) P1 A in (L) P2 A in (N) Recommended electric wire Solid wire: mm Stranded wire: mm 2 (AWG 22-14) LT7 Dimensions Fuse 1A External contact for continuous light and buzzer External contact for flashing Power supply LT7B-A250FB 70 LT7 Base Unit LT9Z-7T 70 LT7 Mounting Brackets LT9Z-7L 70 Mouniting Dimensions LT9Z-SZ007 M Height Height(mm) 1Light : 211 2Lights : 252 3Lights : 293 4Lights : 334 5Lights : ø USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

7 Signalight Towers 56mm LT1 Series Light Towers with a Tower of Advantages Key features of the LT1 series SignaLight towers include: ustom configurations meet your specifications simply Select your flash preference, lens colors, number of tiers, mounting style, and voltage hoice of LED or incandescent lamps LED lamps provide over 100,000 hours of service life and are interchangeable with incandescent bulbs Incandescent lamps (available up to 10 watts) are vibrationresistant and provide a 2,000 hour service life Replace the bulbs independently; no need to disassemble the entire unit Heat- and shock-resistant polycarbonate lenses Flashing models allow each lamp to be flashed or steady hoice of metallic base or cost-saving plastic base olor-coded wires make assembly and wiring easy Mounting options include base and pole mount Base Mount Pole Mount (with L bracket) File No. E USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -7

8 Signalight Towers LT1 Specifications Specifications LT1A: Incandescent, Non-Flashing LT1D: Incandescent, Flashing/Non-Flashing LT1H: LED, Non-Flashing LT1K: LED, Flashing/Non-Flashing Nominal Voltage 12V A/D ±10% 24V A/D ±10% 120V A ±10% 240V A ±10% Internal Fuse Rating 3.15A 3.15A 1A 1A Lamp Rating urrent Required per Lamp LED 12V A/D 24V A/D 120V A N/A Incandescent 12V, 5W 30V, 10W 120V, 7W 240V, 10W LED Incandescent 0.4A ±10% 0.3A ±10% 0.06A ±10% 0.05A ±10% External ontact apacity 5A 5A 2A 1A In-Rush urrent per Lamp Lamp Style Lamp Life-Span Lens olors Lens Diameter LED Not applicable Incandescent Below 4.0A Below 3.0A Below 0.6A Below 0.5A LED Incandescent LED Incandescent Maximum Tiers 5 Degree of Protection Flash Rate Insulation Resistance Voltage Resistance Operating Range Vibration Resistance Mounting Optional Pole Height BA15D lamp base T20 glass bulb, BA15D lamp base 100,000 hours (minimum) 2,000 hours (average) Red, Yellow, Green, Blue, White 2.20" (56mm) IP20 (for indoor use only), NEMA1 LED: 45/minute ±10% (LT1K only) Incandescent: 80/minute ±10% (LT1D only) More than 3MΩ by a D 500V megger 1,500V A for 1 minute 30 to +40 (LT1A), 10 to +40 (LT1D), 15 to 90% relative humidity 2.2G maximum 10.75" (273mm) Red Green Yellow White Blue 12VD 54mA 78mA 54mA 54mA 78mA 24VD 54mA 39mA 54mA 54mA 39mA 120VA 30mA 30mA 30mA 30mA 30mA Base mount (three stud) Pole mount (horizontal or vertical surface) NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit Install in an upright position N/A Approvals File No. E70646 Wire Size Non-flashing (steady): 20 AWG Flashing: 18 AWG and 20 AWG -8 USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

9 Signalight Towers LT1 Part Numbers (assembled) Part Number Guide ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈ LT1 A R Y G To determine the appropriate Light source and function Number of tiers Voltage Mounting style and base designation olor code SignaLight part number, use these numbered boxes in conjunction with the codes in the Part Numbers: Assembled Parts table below. Part Numbers: Assembled Parts Box No. Description ode ➀ Light source and function Non-flashing (steady), incandescent lamp Flashing/non-flashing, incandescent lamp Non-flashing (steady), LED lamp Flashing/non-flashing, LED lamp ➁ Number of tiers Maximum of 5 tiers 1 5 ➂ ➃ ➄ ➈ Voltage Mounting style and base designation olor code 12V A/D 1 24V A/D 2 120V A 5 240V A (incandescent only) 8 Beige frame cover 1 Metallic frame cover 2 Beige frame cover, pole incl. 3 Metallic frame cover, pole incl. 4 Red Yellow Green Blue White Specify lens color code from the lowest to the highest tier. A D H K R Y G S W ➃ Examples: Assembled Parts Part No. Description LT1A-354-RRR LT1D-182-S LT1D-221-RS LT1H-412-RGYW LT1K-554-GSRGR Non-flashing incandescent, 3 tiers, 120V A, pole-mount, metallic base, all Red lenses Flashing/non-flashing incandescent, 1 tier, 240V A, basemount, metallic base, Blue lens Flashing/non-flashing incandescent, 2 tier, 24V A/D, base-mount, plastic base, Red and Blue lenses Non-flashing LED, 4 tier, 12V A/D, base-mount, metallic base, Red, Green, Yellow, and White lenses Flashing/non-flashing LED, 5 tier, 120V A, pole-mount, metallic base, Green, Blue, Red, Green, and Red lenses USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -9

10 Signalight Towers LT1 Part Numbers (sub-assembled) Frame Lenses Lamps Top ap = omplete Part Part Numbers: Sub-Assemblies Description Part No. Notes Examples Frame Lens LT11-012➂* LT1X-08* 1 =Type A = Incandescent, non-flashing D = Incandescent, flashing/non-flashing H = LED, non-flashing K = LED, flashing/non-flashing 2 = Number of tiers (1 5) ➂ = Lamp voltage 1 = 12V A/D 2 = 24V A/D 5 = 120V A 8 = 240V A * = Frame cover (M = metallic, P = beige) * = olor: R = Red, Y = Yellow, G = Green, S = Blue, W = White LT1A-0142M = Steady light, four tiers, 24V A/D, metallic base LT1D-0125P = Flashing light, two tiers, 120V A, plastic base LT1X-08G = Green lens LED Lamps 12V A/D LTXD-1* LTXD-1R = Red LED, 12V A/D 24V A/D LTXD-2* * = olor: R = Red, Y = Yellow, G = Green, S = Blue, W = White LTXD-2S = Blue LED, 24V A/D 120V A LTXD-120* LTXD-120Y = Yellow LED, 120VA Incandescent Lamps 12V A/D B5-2 30V A/D B V A B5-1 Top cap 240V A B5-4 LT1X-06 Mounting pole (optional) LT1Z-10 Bill of Materials Quantities Description Quantity Body frame Required: 1 per unit Lens(es) Variable: from 1 5 Top cap Required: 1 per unit Lamps Variable: from 1 5 Mounting pole Optional: 1 per unit USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

11 Signalight Towers LT1 Accessories Part Numbers: Accessories/Replacement Parts Description Part No. Remarks LED Lamp LTXD-12 LTXD-22 LTXD V A/D See chart for available colors 24V A/D See chart for available colors 120V A See chart for available colors Incandescent Lamp B5-2 12V A/D, 5W B V, 10W (for use with 24V A/D) B V A, 7W Lens B V A, 10W ➁Lens/LED olor ode olor ode Amber Green Red Blue White Yellow A G R S W Y LT1X-082 See chart for available colors Top ap LT1X-06 lear polycarbonate Mounting Pole LT1Z-10 hrome-plated steel supplied with L bracket and two M22 x 1.5 hexagonal nuts Pole Mounting Fixture LT1Z-11 Aluminum fixture for mounting polemounted units to horizontal surface; not included with assembled SignaLight units NPT Pole Adaptors LT1Z-NPT50 1/2" NPT pole adaptor; not included with assembled SignaLight units LT1Z-NPT75 3/4" NPT pole adaptor; not included with assembled SignaLight units In place of 2 specify lens/led color code from chart at right. USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -11

12 Signalight Towers LT1 Wiring External ontact onnections Wiring is color-coded to match the number of tiers. 1 tier = R 2 tier = RY 3 tier = RYB 4 tier = RYBS 5 tier = RYBSW 1 ommon able = (White) A/D olor odes: R = Red Y = Yellow B = Brown S = Blue W = White LT1A/LT1H: Non-Flash Series LT1D/LT1K: Flash/Non-Flash Series SignaLight Dimensions Assembled Base Mount Assembled Pole Mount 2.20" (ø56mm) Mounting Hole Layout: Base Mounting Style 0.12" " (3 - ø5mm) 2.75" (70mm) L1 1.57" (ø40mm) ord Hole 0.39" (ø10mm) " (10mm) 0.787" (20mm) Number of Tiers L " (170mm) 2 9.4" (1240mm) " (310mm) " (380mm) " (450mm) 1.7 (44mm) 3.2 (81mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

13 Signalight Towers LT1 Dimensions con t Adapter LT1Z-NPT50 NPT " (25mm) NPT50 LT1Z-NPT " (30mm) M22 x 1.5 threads 1.47" (37mm) 1/2" NPT threads Optional Pole Mounting Base: Side View (LT1Z-11) M22 x 1.5 threads 1.63" (41mm) 3/4" NPT threads Mounting Pole (LT1Z-10) ø1.6" (47mm) 2.4" (60mm) 0.8" (20mm) 3.9" (100mm) Optional Pole Mounting Base: Bottom View 2 ø0.2" (5mm) ø2.9" (73mm) Mounting Bracket (provided with mounting pole) 1.3" (32mm) 1.2" 1.4" (30mm)(35mm) 2 ø11mm Pole Length 11.8" (300mm) 0.5" (13mm) 0.875" (22mm) 2.4" (60mm) 10.8" (274mm) ø0.9" (22mm) 2 0.2" x 0.3" (4.5 x 8mm) 1.7" (44mm) 3.2" (81mm) 2 M0.2" x 0.4" (M4 x 10mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -13

14 SL30 Series: 1.18" (30mm) SL30 Series Panel Mounted Annunciators SL Series Panel Mounted Annunciators an Ideal Alternative to Mounting Multiple Pilot Devices luster mounting simplifies panel cutouts and offers a variety of window combination sizes. Available with incandescent or Superbright LED illumination. Key features of the SL30 series include: ustom configurations with up to 200 windows Five window sizes based on a 30mm grid Non-reflective clear lenses Incandescent or Superbright LED illumination Wide variety of input voltages Two color alternate illumination in Red/Green LED UL Recognized File No. E69861 SA ertified File No. LR ert. No. B ABS American Bureau of Shipping Style F Style H Style L Style V Style G Staggered terminals: (30mm x 30mm) (30mm x 60mm) (30mm x 98mm) (60mm x 30mm (60mm x 60mm) increased safety and serviceability USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

15 SL30 Series: 1.18" (30mm) Light Source LED Incandescent Nominal Voltages olors Full Voltage 6, 12, 24V A/D 6, 12, 18, 24, 30V A/D Transformer 120, 240V A 120, 240V A D-D onv. 110V D 110V D Amber, Green, Red, Yellow, Blue (24V only), White, dual color Red/Green (24V only) Amber, Green, Red, Yellow, Blue, White Lamp Type Surface (hip type) LED cluster (20mA approximately) BA9S/13 (T3-1/4) bayonet base (1W) Specifications Available Window Sizes Insulation Resistance More than 100 MΩ by a 500V D megger Degree of Protection IP20 (for indoor use only), NEMA 1 Dielectric Strength Operating Temperature Material of Marking Plate and olor Screen Termination Maximum Size 2,000V A direct (2,500V A transformer (1 minute) 20 to +40 ; 15 90% relative humidity ( 10 to +40 D-D converter) Polycarbonate M3.5 screw with captive sems plate (heck terminals: M3 screw with captive sems plate or applicable units) Full voltage 10 rows, 20 columns (200 windows) Transformer and D/D converter (50 windows) Recommended Wire Size AWG x2 (2mm 2 x 2) F H L V G 30x30mm 30x60mm 30x90mm 60x30mm 60x60mm ert. No. B UL Recognized File No. E69861 SA ertified File No. LR Approvals ABS American Bureau of Shipping USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -15

16 SL30 Series: 1.18" (30mm) Part Numbers (Assembled) Part Number Guide ➀ ➁ ➂ ➃ ➄ ➅ SL30N DD 2 F B A(3) Number of Rows Number of olumns Type Voltage Style olor (number of windows) Description ode Remark ➀ Number of Rows 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 ➁ Number of olumns ➂ Type ➃ Voltage ➄ Style LED Incandescent 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 Full voltage DD 6V, 12V, 24V Full voltage with check terminal DHM 24V only Full voltage 2 color (Red/Green) DW 24V only Transformer TD 120V, 240V A D-D converter D 110V D only Full voltage DS 6V, 12V, 18V, 24V, 30V Transformer TS 120V, 240V 10 row maximum (always expressed in terms of F size windows) 20 column maximum (always expressed in terms of F size windows) 6V A/D 6 Type DD or DS 12V A/D 1 With Type DD or DS 18V A/D 8 Type DS only 24V A/D 2 Type DD, DW, DS or DHM 30V A/D 3 Type DS only 120V A 12 Type TD or TS 240V A 24 Type TD or TS 110V D 1 With Type D No lamp 99 Type DS only Square Horizontal rectangle Horizontal rectangle with barrier Large horizontal rectangle Vertical rectangle F H H2 L V 30x30mm 30x60mm 60x30mm 30x90mm Large square G 60x60mm ➅ olor (number of windows) ombination M Fill out order form on next page Amber Green Red Blue White Yellow A G R S (LED version: 24V only) W Y After each color, specify the number of windows Example... A(3), G(2), R(1) 1. Secondary voltage on transformers and D-D converters is 24V. 2. To specify arrangement of varying window sizes and colors, use the order form on the next page. 3. Drawing required for any units ordered with engraving. 4. Incandescent models use color screen and marking plate, LED models use 2 marking plates (no color screen) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

17 SL30 Series: 1.18" (30mm) Number of Amber A Number of Green G Number of Red R Number of Blue Sheet of Purchase Order No. First Window (upper, left-hand corner of panel) THIS SIDE UP Date Fill in Part Number Below: SL30N Basic Unit Size (style F) S B Black Frame Number of White W Number of Yellow Y ROWS Quantity Note: All units ordered with one order form must be identical. Order Form ontact ompany Phone # Number of Rows Number of olumns Type ode Operating Voltage Style ode Ship to ity/state/zip 1. For part number development, see the previous page. 2. Engraving information is on the next page. 3. Panel cutout dimensions are on page Additional ordering information is on page 40. Note: onvert all window styles to the style F (basic unit size). THIS SIDE UP OLUMNS Remarks: F = One Window H = Two Windows Wide L = Three Windows Wide V = Two Windows High G = Two x Two M = Multiple ombination USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -17

18 SL30 Series: 1.18" (30mm) Engraving Information Part Numbers: Engraving Plates F Window Type H L V G 30x30mm 30x60mm 30x90mm 60x30mm 60x60mm Part No. SL-3PF SL-3PH SL-3PL SL-3PV SL-3PG haracter Size Maximum haracters per Line 7/ / / / / / / / / / / / / / / / / Engraving plates are supplied with all assembled SL units. Maximum Lines Engraving Size Samples 5/16" size 7/32" size 3/16" size 5/32" size 9/64" size 1/8" size Engraving Templates F H G L V USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

19 SL30 Series: 1.18" (30mm) Dimensions Panel ut-out Dimensions No. of olumns No. of Rows Overall Panel Width Dimension Overall Height 1.654" (42mm) 2.835" (72mm) 4.016" (102mm) 5.197" (132mm) 6.378" (162mm) 7.559" (192mm) 8.740" (222mm) 9.921" (252mm) " (282mm) " (312mm) utout Ht 1.378" (35mm) 2.559" (65mm) 3.740" (95mm) 4.921" (125mm) 6.102" (155mm) 7.283" (185mm) 8.465" (215mm) 9.646" (245mm) " (275mm) " (305mm) utout Wd 1.654" (42mm) 1.378" (35mm) 2.853" (72mm) 2.559" (65mm) 4.016" (102mm) 3.740" (95mm) 5.197" (132mm) 4.921" (125mm) 6.378" (162mm) 6.102" (155mm) 7.559" (192mm) 7.283" (185mm) 8.740" (222mm) 8.465" (215mm) 9.921" (252mm) 9.646" (245mm) " (282mm) " (275mm) " (312mm) " (305mm) " (342mm) " (335mm) " (372mm) " (365mm) " (402mm) " (395mm) " (432mm) " (425mm) " (462mm) " (455mm) " (492mm) " (485mm) Total Number of Windows (equivalent to style F basic unit size) " (522mm) " (515mm) " (552mm) " (545mm) " (582mm) " (575mm) " (612mm) " (605mm) 1. The number of rows and columns refers to styles equivalent to style F (basic unit size). For styles H, L, V, and G, convert into style F (basic unit size) equivalents. Style H: 1 window high (1 row) x 2 windows wide (2 columns) Style V: 2 windows high (2 rows) x 1 window wide (1 column) Style L: 1 window high (1 row) x 3 windows wide (3 columns) Style G: 2 windows high (2 rows) x 2 windows wide (2 columns) Example: 18 windows = 3 windows high (3 rows) x 6 windows wide (6 columns) Overall dimension (H x W): 4.016" x 7.559" (102 x 192mm) Panel cut-out (H x W): 3.740" x 7.283" (95 x 185mm) Tolerance: " (1mm), 0 2. For part numbering information, see page 16. Window Dimensions Window Style Style F Style H Style L Style V Style G Appearance Illumination Face (H x W) 1.181" x 1.181" (30 x 30mm) 1.181" x 2.362" (30 x 60mm) 1.181" x 3.543" (30 x 90mm) 2.362" x 1.181" (60 x 30mm) 2.362" x 2.362" (60 x 60mm) Lens (H x W) 1.102" x 1.102" (28 x 28mm) 1.102" x 2.283" (28 x 58mm) 1.102" x 3.432" (28 x 88mm) 2.283" x 1.102" (58 x 28mm) 2.283" x 2.283" (58 x 58mm) Widow Size Marking Plate (H x W x t) 1.062" x 1.062" x 0.04" (27 x 27 x 1.0mm) 1.062" x 2.244" x 0.04" (27 x 57 x 1.0mm) 1.062" x 3.425" x 0.04" (27 x 87 x 1.0mm) 2.244" x 1.062" x 0.04" (57 x 27 x 1.0mm) 2.244" x 2.244" x 0.04" (57 x 57 x 1.0mm) olor Screen (H x W x t) 1.062" x 1.062" x 0.04" (27 x 27 x 1.0mm) 1.062" x 2.244" x 0.04" (27 x 57 x 1.0mm) 1.062" x 3.425" x 0.04" (27 x 87 x 1.0mm) 2.244" x 1.062" x 0.04" (57 x 27 x 1.0mm) 2.244" x 2.244" x 0.04" (57 x 57 x 1.0mm) Engraving Area 0.984" x 0.984" (25 x 25mm) 0.984" x 2.165" (25 x 55mm) 0.984" x 3.346" (25 x 85mm) 2.165" x 0.984" (55 x 25mm) 2.165" x 2.165" (55 x 55mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -19

20 SL30 Series: 1.18" (30mm) Dimensions, continued Single Window 1.654" (42mm) 1.181" (30mm) Style F (basic unit size) 1.181" (30mm) Multiple Windows 0.827" (21mm) 1.181" (30mm) Single Window 1.654" H: 2.835" (72mm) (42mm) L: 4.016" (102mm) H: 2.362" (60mm) 1.181" L: 3.543" (90mm) (30mm) Styles H and L Style V 1.654" (42mm) 0.827" (21mm) 1.181" (30mm) 0.315" (8mm) (typical for all styles) Multiple Windows A Panel Thickness using mounting clips 0.031" to 0.236" (0.8 to 6mm) B H: 1.417" (36mm) L: 2.008" (51mm) H: 2.362" (60mm) L: 3.543" (90mm) 0.827" (21mm) 0.827" (21mm) 1.181" (30mm) H: 2.362" (60mm) L: 3.543" (90mm) 0.315" (8mm) 0.224" (6.2mm) 0.315" (8mm) 0.551" (14mm) 0.551" (14mm) 0.157" (4mm) 0.315" (8mm) (typical for all styles) 0.551" (14mm) Styles F, H, L, V, G: Single Window (right) Multiple Windows (below) Description LED Incandescent A B Full voltage Full voltage LED 2-color alternate A adaptor 2.146" (54.5mm) 2.343" (59.5mm) 3.228" (82mm) 2.264" (57.5mm) D-D converter 3.228" (82mm) Transformer 3.228" (82mm) Terminals (X1, X2) heck terminal () Same terminals, adjacent windows Panel Thickness using mounting clips 0.031" to 0.236" (0.8 to 6mm) A M3.5 screw M3 screw 1.181" (30mm) centers 0.315" (8mm) 0.551" (14mm) 0.551" (14mm) 2.362" (60mm) 1.181" (30mm) 2.835" (72mm) 1.417" (36mm) 2.362" (60mm) B 0.224" (6.2mm) 0.157" (4mm) Style G 2.835" (72mm) 1.181" (30mm) 1.181" (30mm) 1.417" (36mm) 1.417" (36mm) 0.315" (8mm) 0.551" (14mm) 2.362" (60mm) 2.362" (60mm) 2.362" (60mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

21 SL30 Series: 1.18" (30mm) Dimensions, continued SL " (38mm) SL " (48mm) JUMPERS Estimating Weights Thickness = 0.020" (0.5mm) enters: SL30 = 1.181" (30mm) SL40 = 1.575" (40mm) ± 0.004" (0.1mm) SL " (38mm) SL " (37mm) enters enters SL " (48mm) SL " (47mm) enters 0.236" (6mm) Instructions 0.303" (7.7mm) 0.118" (3mm) 0.429" (10.9mm) A x Rows + olumns B x Rows x olumns x Rows x olumns Total Weight of Display Panel 1.Make sure that the panel thickness is sufficient to support the total weight of the display panel(s). A Frame Weight B Housing Weight Full Voltage Transformer (incandescent) A Adapter (LED) D-D onverter (LED only) Lamp/LED Weight (includes lamp/led) 0.68oz (22g) 0.53oz (17g) 0.65oz (21g) 2.36oz (76g) 1.77oz (52g) 2.Weights are approximate. Example: SL30N-0304-DD2FB Total weight = A (rows + columns) + B (rows x columns) + (rows x columns) Total weight = 0.68 (3+4) (3x4) (3x4) = oz. USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -21

22 SL30-IPS Series: 1.18" (30mm) SL30-IPS Series Panel Mounted Annunciators The SL30-IPS combination display lights with control units combine display lights with control units such as pushbuttons, illuminated pushbuttons, selector switches, and keylock selector switches. This results in savings of both space and installation time, since mounting separate switches becomes unnecessary. SL30-IPS combination display lights can be custom built to meet your specifications. Key features of the SL 30 -IPS series include: Switches are integrated into an assembled SL matrix, requiring only one panel cutout Illuminated, non-illuminated, selector, and key-switches are available Five window sizes based on a 30mm grid Non-reflective clear lenses Incandescent or Superbright LED illumination Momentary pushbuttons only Selector Switches 2-Position and Momentary 3-Position Illuminated Pushbuttons Square or Round with Square Bezel Momentary Non-Illuminated Pushbuttons Square or Round with Square Bezel UL Recognized File No. E69861 SA ertified File No. LR ert. No. B USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

23 SL30-IPS Series: 1.18" (30mm) Specifications Light Source LED Incandescent Nominal Voltages Maximum Voltage ontact Thermal urrent Direct 6, 12, 24V A/D 6.3, 18, 24, 30V A/D Transformer 120, 240V A 120, 240V A D-D onv. 110V D 110V D ontact Operating urrent ontrol Unit Types olors 250 A/D 3A (gold contact), 5A (silver contact) Gold contact: 125V A/0.1A, 30V D/ 0.1A (resistive load) Silver contact: 125V A/3A, 250V A/2A (resistive load), 30V D/2A, 125V D 0.4AA (resistive load) Pushbuttons: Square or round, illuminated or non-illuminated (momentary only) Selector switches: 2-position or 3-position, maintained Keylock switches: 2-position or 3-position, maintained Amber, Green, Red, Yellow, Blue, White, dual color Red/Green (24V only) Amber, Green, Red, Yellow, Blue, White Lamp Type Surface (hip type) LED cluster (20mA approximately) BA9S/13 T3-1/4 bayonet base (1W) Available Window Sizes Insulation Resistance More than 100 MΩ by a 500V D megger Degree of Protection IP20 (for indoor use only), NEMA 1 Dielectric Strength Operating Temperature Material of Marking Plate and olor Screen Termination Maximum Size 2,000V A direct (2,500V A transformer (1 minute) 20 to +40 ; (15 90% relative humidity) ( 10 to +40 D-D converter) Polycarbonate Recommended Wire Size AWG x2, (2mm 2 x 2) F H L V G 30x30mm 30x60mm 30x90mm 60x30mm 60x60mm M3.5 screw with captive sems plate heck terminals: M3 screw with captive sems plate Full voltage 10 rows, 20 columns (200 windows) Transformer and D/D converter 10 rows, 20 columns (50 windows) Approvals ert. No. B UL Recognized File No. E69861 SA ertified File No. LR USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -23

24 SL30-IPS Series: 1.18" (30mm) Part Numbers (assembled) Part Number Guide ➀ ➁ ➂ ➃ SL30N DD 2 Description ode Remark ➀ Number of Rows 01, 02, 03, 04, 05, 06, 07, 08, 09, row maximum (number of base unit (F style) windows) ➁ Number of olumns 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 11, 12, 13, 14, 15, 16, 17, 18, 19, column maximum (number of base unit (F style) windows) Standard DD 6V, 12V, 24V Full Voltage With check terminal DHM 24V only LED 2 color (Red/Green) DW 24V only Transformer TD 120V, 240V A ➂ Type ➃ Voltage Number of Rows Number of olumns Type Voltage MLB D-D onverter D 110V D only Incandescent Full Voltage DS 6.3V, 12V, 18V, 24V, 30V Transformer TS 120V, 240V 6.3V A/D 1 Type DD or DS 12V A/D 2 With Type DD, DS 18V A/D 8 Type DS only 24V D 2 Type DD, DW, or DS 30V A/D 3 Type DS only 120V A 12 Type TD or TS 240V A 24 Type TD or TS 110V D 1 With Type D No lamp 99 Type DS only 1. Secondary voltage on transformers and D-D converters is 24V. 2. To specify arrangement of varying window sizes and colors, use the order form on the next page. 3. Drawings are required for any units ordered with engraving. SL30-IPS Order Form Instructions How to order a SL30-IPS display light: Example 1: Specifying a window color Enter the lens illumination color code in each square. Use the table below for color codes. R This example would place a Red window in this location. olor odes olor Amber Green Red Blue White Yellow A G R S W Y ode Example 2: Specifying a control unit Enter the control unit code in the lower right half of each square. Use the table above for color codes and the table below for control codes. R 2 This example would place a Red, square, illuminated pushbutton with silver contacts in this location. ontrol Unit odes ontact Type Type Gold Silver Square illuminated pushbutton (DPDT) 1 2 Round illuminated pushbutton (DPDT) 3 4 Square pushbutton (DPDT) 5 6 Round pushbutton (DPDT) 7 8 Selector switch (2-position) 9 10 Selector switch (3-position) Keylock selector switch (2-position) Keylock selector switch (3-position) For assistance with developing part numbers or completing the order form on the next page, contact IDE technical support USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

25 SL30-IPS Series: 1.18" (30mm) Order Form MLB Sheet of Date Fill in Part Number Below: Number of Rows Number of olumns SL30N Note: onvert all window styles to the style F (basic unit size). Remarks: Basic Unit Size (style F) THIS SIDE UP Type ode Lamp Voltage OLUMNS ROWS Black Frame Purchase Order No. ontact ompany Phone # Ship to ity/state/zip THIS SIDE UP Quantity First Window (upper, left-hand corner of panel) 1. For SL30-IPS ordering form instruction, see previous page. 2 See engraving information on the next page. 3. See panel cutout dimensions on page B Additional ordering information is on page B 40. Note: All units ordered on one order form must be identical. USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -25

26 SL30-IPS Series: 1.18" (30mm) Engraving Information Part Numbers: Engraving Plates F Window Type H L V G 30x30mm 30x60mm 30x90mm 60x30mm 60x60mm Part No. SL-3PF SL-3PH SL-3PL SL-3PV SL-3PG haracter Size Maximum haracters per Line 7/ / / / / / / / / / / / / / / / / Engraving plates are supplied with all assembled SL units. Maximum Lines Engraving Size Samples 5/16" size 7/32" size 3/16" size 5/32" size 9/64" size 1/8" size Engraving Templates F H G L V USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

27 SL30-IPS Series: 1.18" (30mm) Dimensions Front View L (see chart below) 0.24" (6mm) Side View 2.15" (54.5mm) Back View 1.18" (30mm) 0.827" (21mm) 1.18" (30mm) M3.5 Screw Terminal 0.32" (8mm) 0.55" (14mm) # of Rows H 0.25" (6.3mm) 1.18" (30mm) 0.29" (7.6mm) 1.18" (30mm) Bottom View SL30 X1 X2 Illuminated Pushbuttons X1 X2 N2 NO2 2 N1 NO " Non-Illuminated Pushbuttons and Selector Switches N2 NO2 2 N1 NO1 1 M3 Screw Terminal No. of Rows 0.32" (8.2mm) Panel ut-out Size L No. of olumns 1.18" (30mm) 0.32" (8.2mm) X1 = Positive Terminal, X2 = Negative Terminal Panel ut-out Dimensions No. of olumns No. of Rows Overall Panel Width Dimension Overall Height 1.654" (42mm) 2.835" (72mm) 4.016" (102mm) 5.197" (132mm) 6.378" (162mm) 7.559" (192mm) 8.740" (222mm) 9.921" (252mm) " (282mm) " (312mm) utout Ht 1.378" (35mm) 2.559" (65mm) 3.740" (95mm) 4.921" (125mm) 6.102" (155mm) 7.283" (185mm) 8.465" (215mm) 9.646" (245mm) " (275mm) " (305mm) utout Wd 1.654" (42mm) 1.378" (35mm) 2.853" (72mm) 2.559" (65mm) 4.016" (102mm) 3.740" (95mm) 5.197" (132mm) 4.921" (125mm) 6.378" (162mm) 6.102" (155mm) 7.559" (192mm) 7.283" (185mm) 8.740" (222mm) 8.465" (215mm) 9.921" (252mm) 9.646" (245mm) " (282mm) " (275mm) " (312mm) " (305mm) " (342mm) " (335mm) " (372mm) " (365mm) " (402mm) " (395mm) " (432mm) " (425mm) " (462mm) " (455mm) " (492mm) " (485mm) Total Number of Windows (equivalent to style F basic unit size) " (522mm) " (515mm) " (552mm) " (545mm) " (582mm) " (575mm) " (612mm) " (605mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -27

28 SL30-IPS Series: 1.18" (30mm) Dimensions, continued SL " (38mm) SL " (48mm) JUMPERS Thickness = 0.020" (0.5mm) enters: SL30 = 1.181" (30mm) SL40 = 1.575" (40mm) ± 0.004" (0.1mm) SL " (38mm) SL " (37mm) enters enters SL " (48mm) SL " (47mm) 0.303" (7.7mm) 0.118" (3mm) 0.429" (10.9mm) enters 0.236" (6mm) ontact Operations Selector Switches and Keylock Selector Switches Operator Position and ontact Operation (top view) ontact Operation Position ontacts Left enter Right 90 2-position maintained 45 L L R R 3-position maintained DPDT 2-position Left Right NO N NO N Left Right NO N NO N DPDT Left Right Left Right Left Right 3-position NO N NO N NO N NO N NO N NO N USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

29 SL40 Series: 1.57" (40mm) SL40 Series Panel Mounted Annunciators SL40 Series Annunciators SL series panel mounted annunciators are an ideal alternative to mounting multiple pilot devices. luster mounting simplifies panel cutouts and offers a variety of window combination sizes. Available with incandescent or Superbright LED illumination. Key features of the SL40 series include: ustom configuration up to 105 windows Four window sizes based on a 40mm grid Non-reflective clear lenses that can be extended (angled) for better visibility when mounted in higher locations Incandescent or Superbright LED illumination Wide variety of input voltages ert. No. B UL Recognized File No. E69861 ABS American Bureau of Shipping SA ertified File No. LR Extended Windows Style F Style H Style L Style V Staggered Terminals: increased safety and serviceability USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -29

30 SL40 Series: 1.57" (40mm) Light Source LED Incandescent Voltages olors Full Voltage 6, 12, 24V A/D 6.3, 12, 18, 24, 30V A/D Transformer 120, 240V A 120, 240V A D-D onverter 110V D Full voltage: Amber, Green, Red, Yellow, Blue (24V), White, dual color Red/Green (24V only) Amber, Green, Red, Yellow, Blue, White Lamp Type Surface (chip type) LED cluster (40mA approximately) E12/15 (2W) screw base Available Window Sizes F H L V 40x40mm 40x80mm 40x120mm 80x40mm Specifications Insulation Resistance Degree of Protection IP20 (for indoor use only), NEMA 1 Dielectric. Strength Operating Temperature Material of Marking Plate and olor Screen Termination Maximum Size 100MΩ minimum (with 500V D megger), between live and dead parts Full voltage: 2,000V A direct Adaptor/transformer 2,500V A (1 minute) 20 to +40 ; (45-85% relative humidity) Polycarbonate X1 and X2 terminals: M3.5 screw with a captive wire clamp washer (heck terminal: M3 screw, or applicable models) Full voltage: 7 rows, 15 columns (105 windows) Others: 50 windows maximum Recommended Wire Size AWG x2 (2mm 2 x 2) ert. No. B UL Recognized File No. E69861 Approvals ABS American Bureau of Shipping SA ertified File No. LR USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

31 SL40 Series: 1.57" (40mm) Part Numbers (assembled) Part Number Guide ➀ ➁ ➂ ➃ ➄ ➅ SL40N DD 2 F B A(3) Number of Rows Number of olumns Type Voltage Style olor and Number of Windows Part Numbers: Assembled Parts Description ode Remark ➀ Number of Rows 01, 02, 03, 04, 05, 06, 07 ➁ Number of olumns ➂ Type ➃ Voltage LED Incandescent 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 11, 12, 13, 14, 15 Full voltage DD 6V, 12V, 24V Full voltage with check terminal DHM 24V only Full voltage 2 color (Red/Green) DW 24V only Transformer TD 120V, 240V A D-D converter D 110V D only 7 row maximum (number of base unit F-Style windows) 15 column maximum (number of base unit F-Style windows) Full voltage DE 6V, 12V, 18V, 24V, 30V Full voltage with check terminal DEM 6V, 12V, 18V, 24V, 30V Transformer TE 120V, 240V 6.3V (6V) A/D 6 Type DD, DE, or DEM 12V A/D 1 Type DD, DE or DEM 18V A/D 8 Type DE or DEM 24V A/D 2 Type DD, DHM, DW, DE, or DEM 30V A/D 3 Type DE or DEM 120V A 12 Type TD or TE 240V A 24 Type TD or TE 110V D 1 Type D No lamp 99 Type DE or DEM Square F 40x40mm Horizontal rectangle H 40x80mm ➄ Style Large horizontal rectangle L 40x120mm Vertical rectangle V 80x40mm ➅ olor and Number of Windows ombination M Fill out the order form on the next page Amber Green Red Blue White Yellow A G R S (LED version: 24V only) W Y After each color, specify the number of windows Example... A(3), G(2), R(1) 1. Secondary voltage on transformers and D-D converters is 24V. 2. To specify the arrangement of varying window sizes and colors, use the order form on the next page. 3. Drawings are required for any units ordered with engraving. 4. Incandescents use color screen and marking plate, LEDs use two marking plates (no color screen) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -31

32 SL40 Series: 1.57" (40mm) Number of Amber Number of Green Number of Red Number of Blue Number of White Number of Yellow Order Form Purchase Order No. ontact ompany Phone # First Window (upper, left-hand corner of panel) Sheet of THIS SIDE UP Date Fill in Part Number Below: SL40N Basic Unit Size (style F) Window ode Style Operating Voltage Type ode Ship to THIS SIDE UP Number of Rows Number of olumns Note: onvert all window styles to the style F (basic unit size). OLUMNS F = One Window H = Two Windows Wide L = Three Windows Wide V = Two Windows High M = Multiple ombination ROWS Quantity A G R S W Y Note: All units ordered on one order form must be identical. 1. The part number guide is on the previous page. 2. Engraving information is on the next page. (Separate drawing required.) 3. Panel cutout dimensions are on page 34. Remarks: B Black Frame ity/state/zip USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

33 SL40 Series: 1.57" (40mm) Engraving Information Part Numbers: Engraving Plates F H L V Window Type 40x40mm 40x80mm 80x40mm 40x120mm Engraving Template Part No. SL-4PF SL-4PH SL-4PL SL-4PV haracter Size Maximum haracters per Line 5/ / / / / / / / / / / / Maximum Lines Engraving Size Samples 5/16" size 7/32" size 5/32" size F H V L USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -33

34 SL40 Series: 1.57" (40mm) Dimensions Panel ut-out Dimensions No. of olumns No. of Rows Overall Panel Width Dimension Overall Height 2.205" (56mm) 3.780" (96mm) 5.354" (136mm) 6.929" (176mm) 8.504" (216mm) " (256mm) " (296mm) utout Ht 1.772" (45mm) 3.346" (85mm) 4.921" (125mm) 6.496" (165mm) 8.071" (205mm) 9.646" (245mm) " (285mm) utout Wd 2.205" (56mm) 1.772" (45mm) 3.780" (96mm) 3.346" (85mm) 5.354" (136mm) 4.921" (125mm) 6.929" (176mm) 6.496" (165mm) 8.504" (216mm) 8.071" (205mm) " (256mm) 9.646" (245mm) " (296mm) " (285mm) " (336mm) " (325mm) " (376mm) " (365mm) " (416mm) " (405mm) " (456mm) " (445mm) " (496mm) " (485mm) Total Number of Windows (equivalent to style F basic unit size) " (536mm) " (525mm) " (576mm) " (565mm) " (616mm) " (605mm) 1. The number of rows and columns refers to styles equivalent to style F (basic unit size). For styles H, L, and V, convert into style F (basic unit size) equivalents. Style H: 1 window high (1 row) x 2 windows wide (2 columns) Style V: 2 windows high (2 rows) x 1 window wide (1 column) Style L: 1 window high (1 row) x 3 windows wide (3 columns) Example: 18 windows = 3 windows high (3 rows) x 6 windows wide (6 columns) Overall dimension (H x W): 5.354" x " (136 x 256mm) Panel cut-out (H x W): 4.921" x 9.646" (125 x 245mm) Tolerance: " (1mm), 0 2. See page 31 for part numbering information. Window Style Style F Style H Style L Style V Appearance Widow Size Illumination Face (H x W) 1.575" x 1.575" (40 x 40mm) 1.575" x 3.150" (40 x 80mm) 1.575" x 4.724" (40 x 120mm) 3.150" x 1.575" (80 x 40mm) Lens (H x W) 1.457" x 1.457" (37 x 37mm) 1.457" x 3.031" (37 x 77mm) 1.457" x 4.606" (37 x 117mm) 3.031" x 1.457" (77 x 37mm) Marking Plate (H x W x t) olor Screen (H x W x t) Engraving Area 1.409" x 1.409" x 0.04" (35.8 x 35.8 x 1.0mm) 1.409" x 1.409" x 0.04" (35.8 x 35.8 x 1.0mm) 1.339" x 1.339" (34 x 34mm) 1.409" x 2.984" x 0.04" (35.8 x 75.8 x 1.0mm) 1.409" x 2.984" x 0.04" (35.8 x 75.8 x 1.0mm) 1.339" x 2.913" (34 x 55mm) 1.409" x 4.559" x 0.04" (35.8 x x 1.0mm) 1.409" x 4.559" x 0.04" (35.8 x x 1.0mm) 1.339" x 4.488" (34 x 85mm) 2.984" x 1.409" x 0.04" (75.8 x 35.8 x 1.0mm) 2.984" x 1.409" x 0.04" (75.8 x 35.8 x 1.0mm) 2.913" x 1.339" (55 x 34mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

35 SL40 Series: 1.57" (40mm) Dimensions, continued Single Window 2.205" (56mm) 1.575" (40mm) Style F (basic unit size) 1.575" (40mm) Multiple Windows 1.102" (28mm) 1.575" (40mm) 1.102" (28mm) 1.575" (40mm) 0.236" (6mm) (typical for all styles) A Panel Thickness using mounting clips 0.031" to 0.236" (0.8 to 6mm) B 0.433" (11mm) 0.327" (8.3mm) 0.433" (11mm) 0.748" (19mm) 0.748" (19mm) 0.217" (5.5mm) 0.787" (20mm) Styles F, H, L, V: Single Window (right) Multiple Windows (below) Description LED Incandescent A B Full voltage Full voltage LED 2-color alternate A adaptor 2.618" (66.5mm) 2.874" (73mm) 3.327" (84.5mm) 2.539" (64.5mm) D-D converter 3.327" (84.5mm) Transformer 2.854" (72.5mm) Terminals (X1, X2) heck terminal () Same terminals, adjacent windows M3.5 screw M3 screw 1.575" (40mm) centers Single Window 2.205" H: 3.780" (96mm) (42mm) L: 5.354" (136mm) H: 3.150" (80mm) 1.575" L: 4.724" (120mm) (40mm) Styles H and L Multiple Windows H: 1.890" (48mm) L: 2.677" (68mm) H: 3.150" (80mm) L: 4.724" (120mm) 1.102" (28mm) 1.575" (40mm) Panel Thickness using mounting clips 0.031" to 0.236" (0.8 to 6mm) 0.748" (19mm) Style V 2.205" (42mm) 1.102" (28mm) H: 3.150" (80mm) L: 4.724" (120mm) 0.236" (6mm) (typical for all styles) A 0.433" (11mm) 0.748" (19mm 3.150" (80mm) 3.780" (96mm) 1.890" (48mm) 3.150" (80mm) B 0.327" (8.3mm) 0.217" (5.5mm) 1.575" (40mm) 1.575" (40mm) 1.575" (40mm) 0.787" (20mm) 0.433" (11mm) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -35

36 SL40 Series: 1.57" (40mm) Dimensions, continued SL " (38mm) SL " (48mm) JUMPERS Thickness = 0.020" (0.5mm) enters: SL30 = 1.181" (30mm) SL40 = 1.575" (40mm) ± 0.004" (0.1mm) SL " (38mm) SL " (37mm) enters enters SL " (48mm) SL " (47mm) Instructions 0.303" (7.7mm) 0.118" (3mm) 0.429" (10.9mm) enters 0.236" (6mm) Estimating Weights A x Rows + olumns B x Rows x olumns x Rows x olumns Total Weight of Display Panel Make sure that the panel thickness is sufficient to support the total weight of the display panel(s). A Frame Weight B Housing Weight Full Voltage Transformer (incandescent) A Adapter (LED) D-D onverter (LED only) Lamp/LED Weight (Includes Lamp/LED) 0.93oz (30g) 0.93oz (30g) 0.93oz (30g) 2.98oz (96g) 1.92oz (62g) 2.Weights are approximate. Example: SL40N-0304-DD2FB Total weight = A (rows + columns) + B (rows x columns) + (rows x columns) Total weight = 0.93 (3+4) (3x4) (3x4) = oz USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

37 SL Series: Accessories SL Series Accessories Lenses olor Screens Marking Plates Lens Frames Description Application Part No. Remarks olor Screen Marking Plate Lens Frame Lens SL30 incandescent, LED SL40 incandescent, LED SL30 incandescent SL40 incandescent SL30 incandescent, LED SL40 incandescent, LED SL30 incandescent only SL30 LED only SL40 incandescent only SL40 LED only F H and V L G F H and V F H and V L G F H and V F H and V L G F H and V F H V L G F H V L G F H V F H SL-3LF-(UL) SL-3LH-(UL) SL-3LL-(UL) SL-3LG-(UL) SL-4LF-(UL) SL-4LH-(UL) SL-3PF-*-(UL) SL-3PH-*-(UL) SL-3PL-*-(UL) SL-3PG-*-(UL) SL-4PF-*-(UL) SL-4PH-*-(UL) SL-3PF- -(UL) SL-3PH- -(UL) SL-3PL- -(UL) SL-3PG- -(UL) SL-4PF- -(UL) SL-4PH- -(UL) SL-3WF-B SL-3WH-B SL-3WV-B SL-3WL-B SL-3WG-B SL-3WF-BL SL-3WH-BL SL-3WV-BL SL-3WL-BL SL-3WG-BL SL-4WF-B SL-4WH-B SL-4WV-B SL-4WF-BL SL-4WH-BL A lens is included with each window on assembled units Specify color code in place of asterisk ( * ): A = Amber = Transparent G = Green (incandescent) R = Red S = Blue W = White Y = Yellow Specify color code in place of square ( ): = Transparent (LED) W = White (incandescent) WL = White (LED) A lens frame is included with each window on assembled units A color screen and marking plate are included with each window of assembled incandescent units Two marking plates are included with each window of assembled LED units; LED units do not use color screens USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -37

38 SL Series: Accessories Description Application Part No. Remarks IS-6 6.3V, 1W; operating voltage: 5 to 6V A/D Incandescent Lamps BA9S/13 (1W) E12/15 (2W) SL30 incandescent only SL40 incandescent only BA9S/13 lamp base E12/15 lamp base IS-12 IS-24 IS-30 LE-6 LE-8 LE-2 LE-3 12V, 1W; operating voltage: 9 to 12V A/D 24V, 1W; operating voltage: 18 to 24V A/D 30V, 1W; operating voltage: 24 to 30V A /D 6.3V, 2W; operating voltage: 5 to 6V A/D 18V, 2W; operating voltage: 12 to 18V A/D 24V, 2W; operating voltage: 18 to 24V A/D 30V, 2W; operating voltage: 24 to 30V A/D Unless no lamp (99) is specified, a lamp is included with each style F window equivalent One part number is specified for one replacement bulb LED Lamps SL30 LED only 1-color SL30 LED only 2-color: Red/Green SL40 LED only 1-color 6V A/D 12V A/D 24V A/D SL-6SP* SL-1SP* SL-2SP* 24V A/D SL-2SP-R/G 6V A/D 12V A/D 24V A/D SL-6EP* SL-1EP* SL-2EP* Specify color code in place of asterisk (*): A = Amber G = Green R = Red S = Blue (available in 24V version only) W = White Y = Yellow SL40 LED only 2-color: Red/Green 24V A/D SL-2EP-R/G Replacement Parts Full Voltage Models Description Type Part Number SL30 Incandescent DS SL-3DS Standard LED DD SL-3DH LED LED w/ heck Terminal DHM SLD-3DHM Dual olor LED DW SLD-3DW SL 40 Incandescent DE SL-4DE Incandescent w/ heck Terminal DEM SL-4DEM Incandescent Standard LED DD SL-4DH LED w/ heck Terminal DHM SL-4DHM Dual olor LED DW SL-4DHW Step Down Models Description Type Part Number SL30 Incandescent Incandescent xfrmr, 120V A TS12 SL-3TS120 Incandescent xfrmr, 240V A TS24 SL-3TS240 LED xfrmr, 120V A TD12 SL-3TP120 LED LED xfrmr, 240V A TD24 SL-3TP240 LED D-D converter, 110V D D1 SL-3P1 SL40 Incandescent Incandescent xfrmr, 120V A TE12 SL-4TE12 Incandescent xfrmr, 240V A TE24 SL-4TE240 LED xfrmr, 120V A TD12 SL-4TP120 LED LED xfrmr, 240V A TD24 SL-4TP240 LED D-D converter, 110V D D1 SL-4P USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

39 SL Series: Accessories Description Application Part No. Remarks Lamp Holder Tool SL30 and SL40 incandescent OR-55 Rubber tool eases the removal of incandescent lamps Tab Terminal Adaptors Used for wiring quickconnect terminals TW-FA1 #250 tab terminal (W x H): 0.250" x 0.031" (6.35 x 0.8mm) single tab Jumpers SL30 SL40 X1 terminal (spade) X2 terminal (ring) terminal (ring) X1 terminal (spade) X2 terminal (ring) SL-JP30 SL-JP33 SL-JP32 SL-JP40 SL-JP41 Total number of jumpers equals total number of style F window equivalents terminal (ring) SL-JP42 Mounting lip Marking Strip Finger-Safe Terminal overs All SLs Use with SL30 types DD, TD, D, DS and TS Use with all SL30 types DHM and DW SL-3K1 BNM2 SL30-VL3 SL30-VL6 Mounting clips are included with the panel (see page 43 for details about quantity and placement). White glossy paper with adhesive back (the dimensions are given below); the marking strip can be stuck to the terminal transformer or directly to the units for identification of the unit or circuit number; Sticker dimension (W x L): 0.197" x " (5 x 10,000mm) Use with SL40 types DD, TD, D, DE and TE HW-VL3 Use with SL40 types DHM, DW, and DEM SL40-VL6 olor Screen (Incandescent only) Amber Blue Green Red White Yellow Lens Frame Black LED Housing Amber Blue Green Red White Yellow lear Non-Reflective Lens Marking Plate Standard: Transparent Special: White (white LED only) Incandescent Lamps BA9S/13 Base (1W) SL30 Series H V F G L F F over Frame Black Mounting lip (included with unit) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -39

40 SL Series: Accessories General Information: Ordering SL When ordering a custom-built combination of SL display lights for a multiple panel, copy the order form provided. This is the only order form accepted. Using the Order Form Part No.: Enter the part number using the part numbering guides. Quantity: Enter the number of identical completely assembled panels required. Window ount: onvert all window styles to style F (basic unit size) equivalents: Style F = 1 window Style H = 2 windows (1 row high x 2 columns wide) Style L = 3 windows (1 row high x 3 columns wide) Style V = 2 windows (2 rows high x 1 column wide) *Style G = 4 windows (2 rows high x 2 columns wide) 1. Style G is available for the SL30 series only. Maximum Windows for Multiple ombination Panels For style code M, it is necessary to use the order form. Do not exceed maximum panel sizes: SL30: 200 windows (full voltage) 50 windows (other type codes) SL40: 105 windows (full voltage) 50 windows (other type codes) Series: SL " (30mm) or SL " (40mm) Window style(s): Style F, H, L, or V for SL30 or SL40 Style G for SL30 only Style M for a multiple combination panel Row count: onvert all windows to style F (basic unit size using information in the left column of this page. olumn count: onvert windows to style F (basic unit size) using information in the left column of this page. Illumination type: LED or incandescent. Input mode: Full voltage, transformer, or D-D conversion for LED; full voltage or transformer for incandescent. Operating voltage: See preceding page to select voltages compatible with the input mode required. Window colors: Specify the number of windows in each color. Engraving: learly mark the engravings for each window desired on the grid of the order form clearly. If there is not enough space, number each window and use a separate sheet to write the engravings for each window number. Also note no engraving. Using the grid on the order form (following page), show the actual size and placement of all desired windows. To Specify a Multiple ombination Draw a heavy outline on corresponding gray lines to show the overall panel size. Darken the appropriate gray lines to show the outlines of the various window style(s) required. For each window, specify color and clearly identify the engraving desired. 2. If there is not enough space on the grid to show the engraving clearly, number every required window, and write the engraving on a separate sheet of paper. Make sure to write the window number which corresponds to the engraving, and also make sure to note no engraving as required. Determining SL Pricing 1. The initial, 2-window price is determined based on series, type, and style. This 2-window price includes framing and assembly. When ordering a single window, the 2-window price is also the minimum price, including window, framing, and assembly. 2. onvert all window styles required into style F (basic unit size) equivalents using the information in the left column of this page. 3. Subtract 2 from the total number of style F equivalent windows determined in step 2. The result is the number of additional windows. 4. Multiply the number of additional windows determined in step 3 by the additional window price. 5. Determine the quantity of windows with engravings. Do not use the style F equivalents; use the actual window style(s) required. 3. The pricing referred to above can be obtained from any authorized IDE representative or distributor. 4. When determining window pricing, always convert every window size required to the style F equivalent (basic unit size) USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

41 SL Series: Accessories SL Series Installation Instructions Installation Notes 1. Since lamps generate heat, it is recommended that ventilation be provided for cooling when more than ten lamps are lit continuously. 2. A lower number of windows is specified for multiple transformer, A adapter, and D-D converter units (50 maximum, instead of 200 as for full voltage only). This is done to avoid damage which may result from excessive heat generation when all lamps are lit simultaneously. 3. When multiple units are panel mounted, determine panel thickness so that the combined weight of all units and connecting wires can be supported. 4. Multiple units are not designed for continuous, simultaneous lighting of all lamps. However, it is possible to conduct a lamp test with all lamps lit simultaneously for a period of up to 40 minutes. 5. Before removing the LED unit, turn the power supply off. 6. D-rated voltages for LED units are complete direct current voltages. Make sure to check the measuring instruments and compensate for any error in the measured, full-wave rectified or pulsating voltages. 7. To ensure brightness and long life of LED units, keep the D power voltage within the operating voltage range. LED Operating Voltage Range: 24V D ± 10% Terminal Arrangements (LED units) For full voltage (1- and 2-color) and D-D converter LED units, terminal X1 is positive and terminal X2 is negative. Make sure to observe polarity when wiring. SL30 Full Voltage D-D onverter X1 X2 SL30 A Adaptor Transformer X1 X2 X1 D1 D2 X2 SL40 Full Voltage D-D onverter SL30/40 2-olor LED (alternating) For 2-color alternate units, terminal X1 is positive, and terminals X2 and (check terminal) are negative. X1 X1 RED X2 X2 X1 GREEN X2 SL30 SL40 RED X1 GREEN X2 USA: (800) 262-IDE or (408) , anada: (888) 317-IDE -41

42 SL Series: Accessories Installation Instructions, continued Removing Windows SL30: To remove a window, insert the tip of a small screwdriver into the slot under the lens frame and gently press down on the screwdriver. SL40: To remove an extended window, pull on the top as if to extend the unit; then continue pulling until the unit comes out of the housing. All units are shipped with windows retracted. When transporting units, make sure windows are pushed in fully. After windows are installed, they can be extended as shown in Figure 1. Removing Lens, olor Screen, and Marking Plate The lens has two retaining projections on the right and two on the left. To remove the lens, color screen, and marking plate from the lens frame, push open the lens frame with both hands as shown in Figure 2. The lens can also be removed by inserting a screwdriver into one of the sides with recesses. Since the lens has an orientation, be sure to insert the screwdriver in the direction shown in Figures 3 and 4. Installing Lens, olor Screen, and Marking Plate First, install the marking plate and color screen into the lens frame. To install the lens, insert its retaining projections into the recesses inside the lens frame, and press the lens into the lens frame as shown in Figure 5. Replacing the LED Unit To remove: Insert the tip of a screwdriver into one of the two slots inside the LED unit. Pull the LED unit straight out without pressing on the LED terminals, as shown in Figure 6. To install: Make sure that the junction inside the LED unit is aligned in the same direction as the junction of the LED housing. Push the LED unit into the LED housing as shown in Figure 7. Figure 1: SL40 Figure 3: SL30 Figure 2: SL30 and SL40 Figure 4: SL40 Lens Marking Plate olor Screen Lens Frame Installing Units into a Panel Single units: With leaf springs installed, push the SL housing from the front of the panel. Secure the SL housing with two mounting clips. Tighten the mounting clip screws to a torque of 4 to 5 kgf-cm as shown in Figure 8. Multiple combination units: Insert the units into the panel cut-out from the front. Install the attached mounting clips into the openings on the frame, and tighten the screws as shown in Figure 9. After tightening, use Loctite to prevent loosening. The number of mounting clips included with each multiple unit varies with the number of windows as shown in the table below. Figure 5: SL30 and SL40 Figure 6: Remove LED Figure 7: Install LED Figure 8: Single Unit Figure 9: Multiple ombination USA: (800) 262-IDE or (408) , anada: (888) 317-IDE

Section. Display Lights. Selection Guides... C 2. SignaLight Towers... C 4

Section. Display Lights. Selection Guides... C 2. SignaLight Towers... C 4 ourtesy of Steven Engineering, Inc. 230 Ryan Way, South San rancisco, A, 94080-6370 Main Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com Section Selection Guides... 2 SignaLight

More information

Display Lights. Display Lights. LT1 Series. LT1 Series SignaLight Light Towers. Display Lights with a Tower of Advantages

Display Lights. Display Lights. LT1 Series. LT1 Series SignaLight Light Towers. Display Lights with a Tower of Advantages LT1 Series SignaLight Light Towers with a Tower of Advantages Key features of the LT1 series SignaLight towers include: ustom configurations meet your specifications simply Select your flash preference,

More information

Signaling Lights. SLC40 Series Panel Mounted Annunciators. SLC 40 Series Annunciators

Signaling Lights. SLC40 Series Panel Mounted Annunciators. SLC 40 Series Annunciators SLC40 Switches & Pilot Lights SLC40 Series Panel Mounted Annunciators SLC 40 Series Annunciators SLC series panel mounted annunciators are an ideal alternative to mounting multiple pilot devices. Cluster

More information

MT5C/8C Ø56mm / Ø85mm Steady & Flashing with Buzzer

MT5C/8C Ø56mm / Ø85mm Steady & Flashing with Buzzer MT5/8 Ø56mm / Ø85mm Steady & Flashing with uzzer TOWER LIGHTS Incandescent or Optional bulbs available Selectable Steady or Flashing Modes Prism-cut lenses for even light distribution Surface, or Wall

More information

Switches & Pilot Devices

Switches & Pilot Devices ømm - HW Series Key features: ocking lever removable contact blocks Finger-safe IP0 contacts as standard, other terminal styles available Tamperproof construction All E-stops meet EN8 and are compliant

More information

Relays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection

Relays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications

More information

SEALED, ILLUMINATED ROCKER SWITCHES

SEALED, ILLUMINATED ROCKER SWITCHES K/K LOW OST, ROKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and

More information

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features: RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator

More information

Table of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35

Table of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35 Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff

More information

M = Maintained S = Spring Return. Operator Only ➊ No Contacts M M 800T-00HX2KB6 M M 800T-24HR2KB6AX 800T-24HR17KB6AX Incandescent

M = Maintained S = Spring Return. Operator Only ➊ No Contacts M M 800T-00HX2KB6 M M 800T-24HR2KB6AX 800T-24HR17KB6AX Incandescent ulletin 800T 30.5 mm Push uttons 2-Position Knob/Lever Type Selector Switch Units, Illuminated Operator Position Operator Type Standard Knob Knob Lever Type Lamp Volts olor M = Maintained S = Spring Return

More information

GT3W Series Dual Time Range Timers. CSA Certified File No.LR58183 LR96764 LR83814

GT3W Series Dual Time Range Timers. CSA Certified File No.LR58183 LR96764 LR83814 TW Series Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA, 00-70 Main Office: (50) 5-00 Outside Local Area: (00) 5-00 www.steveneng.com Specifications Time Range Rated Voltage

More information

Round Indicator Lights Mounting Hole Page

Round Indicator Lights Mounting Hole Page PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.

More information

Accessories. Accessories

Accessories. Accessories Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the coloured sections to assemble a complete switch. For other options or

More information

Specifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others

Specifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility

More information

Specifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others

Specifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility

More information

IDEC LUMIFA Family LED Lighting Solutions

IDEC LUMIFA Family LED Lighting Solutions IDEC LUMIFA Family LED Lighting Solutions LUMIFA Lighting your way For over two decades, IDEC has produced LEDs for applications requiring indicator lights and signaling towers. Which is why it was a natural

More information

EAO Product Information. Series 84

EAO Product Information. Series 84 EAO Product Information Series Switches and Indicators Switches and Indicators Index Series Description Page 539 Product Assembly Page 540 Mounting Instruction Page 541 Product Range - pushbuttons for

More information

Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M

Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard

More information

For more information, please visit or call toll free at

For more information, please visit   or call toll free at GT3 GT3 Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEs UL,

More information

General Specifications

General Specifications eries W lides Rotaries Programmable Illuminated P Pushbuttons upplement Accessories Indicators General pecifications Electrical apacity (Resistive Load) Power Level: 9A @ 125V A or 6A @ 250V A Other Ratings

More information

SOLID STATE HOURMETERS & COUNTERS 700 SERIES APPLICATIONS A wide variety of industrial and commercial applications, including scheduled maintenance, warranty and leasing for medical equipment, transport

More information

Bulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.

Bulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below. Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents

More information

E3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features

E3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that

More information

General Specifications

General Specifications Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity

More information

Relays & Sockets. RH Series Compact Power Relays. Part Number Selection. Blade Terminal

Relays & Sockets. RH Series Compact Power Relays. Part Number Selection. Blade Terminal RH Key features SPDT through PDT, 0A contacts Compact power type relays Miniature power relays with a large capacity 0A contact capacity Compact size saves space Contact SPDT PDT PDT RH Series Compact

More information

E x hibitor TOKISTAR TOKISTAR LIGHTING

E x hibitor TOKISTAR TOKISTAR LIGHTING E x hibitor TOKISTAR TOKISTAR LIGHTING Exhibitor TM T okistar Exhibitor Series is a wet-location festoon lighting system used in amusement parks, shopping centers, street decorations and promenades. Exhibitor

More information

IDEC LUMIFA LED Illumination for Industrial Automation

IDEC LUMIFA LED Illumination for Industrial Automation IDEC LUMIFA LED Illumination for Industrial Automation LUMIFA Lighting your way For over two decades, IDEC has been producing LEDs for applications requiring indicator lights and signaling towers. In 1999,

More information

IDEC LUMIFA LED Illumination for Industrial Automation

IDEC LUMIFA LED Illumination for Industrial Automation IDEC LUMIFA LED Illumination for Industrial Automation LUMIFA Lighting your way For over two decades, IDEC has been producing LEDs for applications requiring indicator lights and signaling towers. In 1999,

More information

Pendant control stations 6

Pendant control stations 6 Characteristics 6 Environment Conformity to standards IEC 97-5-1, EN 6097-5-1 Product certifications NEMKO. Special version: UL Listed A600-Q600, CSA A600-Q600 Protective treatment Standard version TH

More information

RSB-RCS/L SERIES The RSB-RCS/L Series rectangular shoebox is offered in a variety of lighting distributions with sharp cutoff to meet the challenging demands of today s site lighting projects. Fixture

More information

8WD4 Signaling Columns

8WD4 Signaling Columns Siemens AG 200 General data Overview The 8WD4 signaling columns are flexible in design and versatile in use. 1 1 2 2 3 3 4 5 4 6 8 5 6 10 11 8 12 15 13 14 10 NSC0_002 11 12 NSC0_0026 1 Acoustic element

More information

370 SERIES SIGNAL TOWERS 370 SERIES Ø70

370 SERIES SIGNAL TOWERS 370 SERIES Ø70 370 SERIES Modu lar visual and audio indicators By means of a simple manual operation, the bayonet fixing system makes it possible to combine up to seven signal units and simultaneously to connect them

More information

Switches & Pilot Devices

Switches & Pilot Devices ø16mm - B Series Style Standard Bezel (black) Operation ontact Material Non-Illuminated Pushbuttons (Assembled) ontact Standard Bezel P Board Flush Bezel P Board olor ode k SPDT BjB-M1T5k BjB-M1T1Vk BlmB-M1T5k

More information

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

More information

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

More information

onlinecomponents.com

onlinecomponents.com Key features: Relay Barrier: Intrinsically Safe Explosion-Proof: EB3C Relay [Exia] II C IEC0079 compliant Dry-contact switches can be connected to the EB3C 8- and 1-circuit types are available in common

More information

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

More information

General Specifications

General Specifications General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:

More information

Timers RTE. RTE Series Analog Timers

Timers RTE. RTE Series Analog Timers RTE RTE Key features: 20 time ranges and 10 timing functions Time delays up to 600 hours Space-saving package High repeat accuracy of ± 0.2% ON and timing OUT LE indicators Standard 8- or 11-pin and 11-blade

More information

HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton

HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates

More information

KRPA, KRP, KA, KR series

KRPA, KRP, KA, KR series Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting

More information

Timers. GT3A Series Analog Timers. GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6 Operation Multi-mode Multi-mode with inputs (11 pins) Time Range

Timers. GT3A Series Analog Timers. GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6 Operation Multi-mode Multi-mode with inputs (11 pins) Time Range GT3A Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEDs UL,

More information

Sorenson Lighted Controls

Sorenson Lighted Controls Sorenson Lighted Controls Illuminating Innovation 9 INDICATOR CATALOG New Products Located on Pages - Sorenson Lighted Controls Illuminating Innovation ORDER TERMS & CONDITIONS Minimum OEM Order Value:

More information

Complete units: Selector switches ø 22mm

Complete units: Selector switches ø 22mm Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions

More information

Price List w.e.f 1st October 2018

Price List w.e.f 1st October 2018 Price List 2018-19 Rishabh Instruments Pvt. Ltd. Price List w.e.f 1st October 2018 www.rishabh.co.in Analog Expertise Analog Panel Meters 90 Scale 48x48 mm 72x72 mm 96x96 mm 144x144mm Group Moving Iron

More information

Medium-base Lampholders

Medium-base Lampholders Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated

More information

SOLID STATE HOUR METERS & COUNTERS 7 0 0 S E R I E S A p p l i c a t i o n s A wide variety of industrial and commercial applications, including scheduled maintenance, warranty and leasing for medical

More information

Timers. GT3A Series Analog Timers. GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6 Operation Multi-mode Multi-mode with inputs (11 pins) Time Range 13.

Timers. GT3A Series Analog Timers. GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6 Operation Multi-mode Multi-mode with inputs (11 pins) Time Range 13. G3 G3 Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEs Specifications

More information

PUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH PSA, LPSA TYPE

PUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH PSA, LPSA TYPE PUSHBUTTON SWITCH / SEECTOR SWITCH / IUMINATED PUSHBUTTON SWITCH PSA, PSA TYPE FEATURES 1 3 The PSA and SPSA types are oil-proof. The enclosure rating is IP65 (water-jet-proof type), covering wide applications.

More information

TWTD Series: Heavy duty switches built to last

TWTD Series: Heavy duty switches built to last ø0mm - TWTD Series iltight TWTD Series Full Size NEMA Pushbuttons TWTD Series: Heavy duty switches built to last features include: Variety of button sizes up to 9/6" (65mm) Rugged construction includes

More information

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0 Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.

More information

A W - A 2A R - 24D - 1

A W - A 2A R - 24D - 1 Knob-type Selector Switch A165S/W Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cul approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive haracteristics Extremely low profile of. (.mm) from P to top of switch. Red, green, or yellow LED with spot or full face illumination. Rubber seal construction prevents contact contamination

More information

SB 50 Connectors - up to 120 amps

SB 50 Connectors - up to 120 amps Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one

More information

Square Straight Steel - 4 Bolt Base Light Poles

Square Straight Steel - 4 Bolt Base Light Poles Quick Ship Square Bronze over Galvanized Straight Steel Pole - 4 Bolt Base Square Straight Steel - 4 Bolt Base Light Poles Optional Tenon Mounting (specify) "D" Top Diameter Arm Drilling Per Customer Specs.

More information

General Specifications

General Specifications Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity

More information

C-Series. Circuit Breaker.

C-Series. Circuit Breaker. -Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in

More information

Fig. 5 Fig. 4. Fig. 11. Fig. 10. Amps Color. Style. Pl Pin Pl RC SqB RC SqB Pin Pin RC RC RC RC RC RB SqB RqB RqB RC

Fig. 5 Fig. 4. Fig. 11. Fig. 10. Amps Color. Style. Pl Pin Pl RC SqB RC SqB Pin Pin RC RC RC RC RC RB SqB RqB RqB RC SU-MINI & MINITURE PUSHUTTONS Fig. Fig. -02 - -00-0 -07 - - -0 - -0-0 -0-0 -0 - -2 - -7-2 Fig. Fig. 2-02-U --U -00-U -0-U -07-U --U --U -0-U --U -0-U -0-U -0-U -0-U -0-U --U -2-U --U -7-U -2-U Fig. Fig.

More information

800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)

800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only) 1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description

More information

AHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1

AHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1 Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles

More information

7SD/7SH/7SM Temperature Controllers

7SD/7SH/7SM Temperature Controllers 7SD/7SH/7SM Temperature ADVANTAGE EZ Series 7SD, 7SH, 7SM 1/16 DIN Temperature 3Digit LED Display Thermocouple and RTD Input Autotuning NEMA 4X Field onfigurable 100 to 40 Vac Switching Power Supply Programmable

More information

ON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H

ON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Solid-state Timer CSM DS_E_

More information

40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring

40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring OTHER SUNX PRODUCTS NA0 SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Interference prevention Slim and intelligent Refer to p.9l for the light curtain. Slim body Failure monitoring

More information

lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.

lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [. dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are

More information

Complete units: Push-buttons ø 22mm

Complete units: Push-buttons ø 22mm Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01

More information

Fig. 5 Fig. 4. Fig. 11. Fig. 10. Amps Color. Style. Pl Pin Pl RC SqB RC SqB Pin Pin RC RC RC RC RC RB SqB RqB RqB RC

Fig. 5 Fig. 4. Fig. 11. Fig. 10. Amps Color. Style. Pl Pin Pl RC SqB RC SqB Pin Pin RC RC RC RC RC RB SqB RqB RqB RC SU-MINI & MINITURE PUSHUTTONS Fig. Fig. ulk Part No. Part No. -02 - -00-0 -07 - - -0 - -0-0 -0-0 -0 - -2 - -7-2 Fig. Fig. 2-02-U --U -00-U -0-U -07-U --U --U -0-U --U -0-U -0-U -0-U -0-U -0-U --U -2-U

More information

Complete units: Mushroom heads ø 22mm

Complete units: Mushroom heads ø 22mm Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red

More information

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009 Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred

More information

Long sensing range. Most suitable for conveyor lines and parking lot applications. 10 m ft (Red LED)

Long sensing range. Most suitable for conveyor lines and parking lot applications. 10 m ft (Red LED) SERIES Compact Multi-voltage Photoelectric Multi-voltage Interference prevention Multi-voltage The series can operate a to 2 V AC or to 2 V DC, which makes it suitable for supply voltages all over the

More information

PICO-AMP Miniature Remote Sensing System

PICO-AMP Miniature Remote Sensing System PICO-AMP Miniature Remote Sensing System MD14 Modulated Amplifer and Ultra-small Remote Sensors PICO-AMP Features Ultra-small remote sensors to fit the tightest locations Three fixed frequency selections

More information

HSAF Era Stepped Aluminum Fluted Pole revision 10/6/15 kl_hasf_spec.pdf

HSAF Era Stepped Aluminum Fluted Pole revision 10/6/15 kl_hasf_spec.pdf Type: Job: Catalog number: Approvals: / / / / / / Pole Cat. No. Mounting Arm Drilling Pole Finish Optional Optional Pole Optional Duplex Option Base Cove Top Cap/Finial Receptical Specifications Conduit

More information

Amplifier-separated Manual Sensitivity Setting Photoelectric Sensor

Amplifier-separated Manual Sensitivity Setting Photoelectric Sensor -separated Manual Sensitivity Setting Photoelectric Sensor Twin Adjuster Enables Delicate Sensitivity Setting Twin Adjuster Its twin adjuster enables easy optimum setting to suit the application. Twin

More information

Setting Standards Connectors M 16

Setting Standards Connectors M 16 Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and

More information

40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES

40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES 9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60

More information

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input

More information

Set model No. ESN-T8. 140mm ESN-T mm ESN-T mm ESN-T mm. Light axis interval: 20mm. Smallest detectable object diameter: 30 mm

Set model No. ESN-T8. 140mm ESN-T mm ESN-T mm ESN-T mm. Light axis interval: 20mm. Smallest detectable object diameter: 30 mm series Light urtain Sensors Ultra-thin Slim type of only mm thick and mm wide never affecting work efficiency High-intensity red LED employed Large operation indicator of high-intensity LEDs in series

More information

and signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights

and signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights Characteristics 1 Environment Protective treatment Standard version TH Ambient air temperature Storage C - 40 + 70 around the device Operation C - 25 + 70 for LED and neon bulb versions - 25 + 40 for incandescent

More information

Diameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24

Diameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24 Ø0mm Shaft Magnetic Multi-Turn Absolute Type Diameter Ø0mm Shaft Type Magnetic Multi-Turn Absolute otary Encoder Features Higher resistant to vibration and impact by magnetic elements than optical encoder

More information

NA DigiParts GmbH. Small / Slim Object Detection Area Sensor

NA DigiParts GmbH. Small / Slim Object Detection Area Sensor 953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business

More information

NA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation

NA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation 44 PHOTO PHOTO Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F- Glossary of terms... P.549~ guide... P.49~ General precautions...p.55~ Recognition Make sure to use

More information

Timers GE1A. GE1A Series ON Delay Timers Single Function

Timers GE1A. GE1A Series ON Delay Timers Single Function Key features: DPDT or SPDT + instantaneous SPDT 8-pin, octal base 8 time ranges Repeat error ±0.2% maximum Large, clear knob for easy setting Instant monitoring of operational status by LED indicators

More information

NA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!

NA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable! 891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC

More information

3 & 4 Wire Self Compensating Ultrasonic Transmitters - Standard Mtg.& Sanitary Ferrule Mtg.

3 & 4 Wire Self Compensating Ultrasonic Transmitters - Standard Mtg.& Sanitary Ferrule Mtg. & 4 Wire Self ompensating Ultrasonic Transmitters - Standard Mtg.& Sanitary Ferrule Mtg. FETURES S.S. 1L Face Material c/w Tri-lamp Mtg. Base Simple push-button calibration (ccurate) Output 4-20 m / 20-4

More information

HG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS

HG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS 20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,

More information

Control Stations ø 22

Control Stations ø 22 Control Stations ø 22 CONTROL STATIONS - NON-ILLUMINATED Technical Info (p. 103) MUSHROOM HEAD Ø 40 - MAINTAINED Push-turn to reset Part Number M16/20 47.9 25.7 Ø 40 Red NC EMERGENCY STOP LBX10510 Red

More information

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack

More information

Ledex Tubular Linear Solenoids

Ledex Tubular Linear Solenoids Ledex Tubular Linear Solenoids Force lbs. (newtons) 10 (.) (35.5) 6 (6.69) (17.79) 10% Duty Cycle 70W 5% Duty Cycle W 50% Duty Cycle 1W 100% Duty Cycle 7W saia-burgess Solenoids 1-00-99-9 www.saia-burgess-usa.com/ledex

More information

Easy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant

Easy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient

More information

[ 21.3 ] 0.84 A [ 13.0 ] 0.51

[ 21.3 ] 0.84 A [ 13.0 ] 0.51 Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing

More information

6mm Interface Relays RV8 Series

6mm Interface Relays RV8 Series 6mm Interface Relays RV8 Series PRODUCT DESCRIPTION Electromechanical C1D2 (screw terminal) Solid State (spring clamp) IDEC 6mm interface relays provide a compact solution for general purpose relay requirements.

More information

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

More information

UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550

UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550 UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical

More information

SBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529

SBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529 Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing

More information

MODA COVE INTERIOR DYNAMIC WHITE SPECIFICATION. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

MODA COVE INTERIOR DYNAMIC WHITE SPECIFICATION. Client: Project Name: MODA Contact:   Quantity: Type: PO#: Notes: MODA COVE INTERIOR DYNAMIC WHITE Client: Project Name: MODA Contact: E-Mail: Type: Notes: PO#: Quantity: Specification Grade Premium Interior Cove Fixture. MODA COVE Interior is a new patent pending cove

More information

DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks

DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks Series Cables... - Cordset Accessories... - Receptacles... 6-9 Receptacle Accessories. 0- Junction Blocks... -6 L- Mencom Corporation MencomConnectors.com TEL: 770--8 Ph: 800-966- www.mencom.com Series

More information