C-Series. Circuit Breaker.

Transcription

1 -Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in - poles, amps, UL Recognized up to 0VA or 0VD, UL Listed up to 0VA or VD, with choice of time delays, terminal options, actuator styles and colors. Product Highlights: The UL -Series employs a unique arc chute design which allows for higher interrupting capacities of up to 0,000 amps. New thermoset glass filled polter half shell construction provides for increased mechanical and electrical strength. The wiping contacts, mechanical linkage with two step actuation, clean contacts providing high, positive contact pressure and longer contact life Available with American Standard or Metric Threaded Stud terminals, or Saddle lamp screw terminals. Optional mid-trip handle style actuator allows visual indication of electrical overload with or without alarm feature Available with new solid color rocker actuators and unique two-color Visi-rocker actuators, which can be specified to indicate either the ON or TRIPPED/OFF mode Exclusive Rockerguard and Push-To-Reset bezel help prevent inadvertent actuation HANDLE ATUATOR PARALLEL POLE ATUATOR Agency ertifications: UL Recognized UL Standard 0 UL Standard 0 UL Standard 00 UL Listed UL Standard UL Standard A SA Accepted SA ertified TUV ertified VDE ertified * For full Agency ertifications, please see pg. METAL TOGGLE ATUATOR

2 -Series General Specifications Electrical Tables Table A: Lists UL Recognized & SA Accepted configurations and performance capabilities as a omponent Supplementary Protector T, OLO, U Agency ode L 0- T, OLO, U Agency ode L Parallel Pole Notes for Table A: Requires branch circuit backup with a UL LISTED Type K or RK fuse rated A minimum and more than times full load amps t to exceed A for 0 Amp or less rating and t to exceed for through 00 Amp rating *Manufacturer reserves the right to change product specification without prior tice.

3 -Series General Specifications Electrical Tables Table B: Lists UL Recognized and SA Accepted configurations and performance capabilities as a Manual Motor ontroller. RELAY Notes for Table B: UL recognized and SA Accepted at 0V refers to & pole versions used in a Ø, wye connected circuit or -pole version connected with poles breaking. Ø and backed up with series fusing as stated above in te. * Series, Shunt and Relay Trip - Voltage oil onstruction t current coils Table : Lists UL Recognized, SA Accepted, VDE and TUV ertified configurations and performance capabilities as a omponent Supplementary Protector. Notes for Table : General Purpose ratings for UL/SA only. Requires branch circuit backup with a UL LISTED Type K or RK fuse rated A minimum and more than times full load amps t to exceed A for 0 Amp or less rating and t to exceed for through 00 Amp rating.

4 -Series General Specifications Electrical Tables Table D: Lists UL Listed (), SA ertified (. No..-M) configuration and performance capabilities as a Molded ase ircuit Breaker. IRUIT ONFIGURATION MAX. RATING 0 SERIES TABLE D : UL LISTED BRANH IRUIT BREAKERS VOLTAGE FREQUENY D PHASE --- URRENT RATING FULL LOAD AMPS INTERRUPTING APAITY (AMPS) ONSTRUTION NOTES WITHOUT BAKUP FUSE 0,000 Limited to Poles Max from - 00 Amps. 0,000 Limited to Poles Max from - 00 Amps. D ,000 - Poles / 0 D ,000 or Poles ( Poles Required for 0 Volts) ,000 - Poles SERIES 0 0 / 0-0,000 - Poles 0.0-0,000 or Poles. Pole of a Pole Unit is Neutral 0 / 0 0 / or Poles. Pole of a Pole Unit is Neutral 0 0 / ,000 Pole 0 0 / ,000 Pole 0 / ,000 Pole DUAL OIL 0 0 / , Notes from Table D: Special catalog number required. onsult factory. Table E: Lists UL Recognized, SA Accepted configurations and performance capabilities as Protectors, Supplementary for Marine Electrical and Fuel Systems (Guide PEQZ, File E). Ignition Protected per UL 00. UL lassified Small raft Electrical Devices, Marine in accordance with ISO (Guide UZMK, File MQ) as Marine Supplementary Protectors. Table F: Lists UL Listed configurations and performance capabilities as ircuit Breakers for use in ommunications Equipment (Guide DITT, File E), under ULA.

5 -Series General Specifications Electrical Maximum Voltage urrent Rating Standard Voltage oils Auxiliary Switch Rating Insulation Resistance Dielectric Strength Resistance, Impedance O H M S AMPERE RATING Pulse Tolerance urves Multiple of Rated urrent x x 000 I r 00 0 RESISTANE, IMPEDANE VALUES from Line to Load Terminals (Values Based on Series Trip ircuit Breaker) 0 Hz / ycle Inrush Pulse Tolerance.. Time Delay urves, & (0 Amps Max.) Time Delay urves, (00 Amps Max.) (0 Amps Max.). t A, 0 WYE/ VA, 0/0 Hz (see Table A.) UL: A,0 VA. (Table D), 0/0 Hz, VD, UL 0, 0 VD, VA Standard current coils: 0.00, 0.0, 0.00, 0.0,.00,.0,.00,.0, 0.0,.0,.0, 0.0,.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 and 00 amps. Other ratings available, see Ordering Scheme. D - V, V; A - 0V; other ratings available, see Ordering Scheme. SPDT; 0. amps-0va, D Aux. Switch.0A, VD. 0.A, 0VD,/ HP, VA,VDE & TUV.0 VA. Minimum of 00 Megohms at 00 VD. UL, SA: 0 V 0/0 Hz for one minute between all electrically isolated terminals. -Series ircuit Breakers comply with the mm spacing and 0V 0/0 Hz dielectric requirements from hazardous voltage to operator accessible surfaces, between adjacent poles and from main circuits to auxiliary circuits per Publications EN 00 and VDE 00. Values from Line to Load Terminal based on Series Trip ircuit Breaker. Multiple of Rated urrent URRENT (AMPS) x 0x I r.0 0 Hz / ycle Inrush Pulse Tolerance 0.0 Time Delay urves, & (0 Amps Max.) TOLERANE (%) % % % Time Delay urves, (00 Amps Max.) (0 Amps Max.) 0.0 Time in Milliseconds t Mechanical Endurance Trip Free Trip Indication Physical Number of Poles Internal ircuit onfiguration Weight Standard olors Environmental 0,000 ON-OFF per minute; with rated current & voltage All -Series circuit breakers will trip on overload, even when actuator is forcibly held in the ON position. The operating actuator moves positively to the OFF position when an overload causes the breaker to trip. With mid-trip, handle moves to the mid position on electrical trip of the circuit breaker. With mid trip handle with alarm switch, handle moves to the mid position and the alarm switch actuates when the circuit breaker is electrically tripped. - poles 0A; - - 0A; - poles -00A. UL Handle: pole 00A, pole 0A; Rocker: pole 00A. Series (with or without auxiliary switch, mid trip & mid trip with alarm switch) Shunt & Relay with current or voltage trip coils, Dual oil, Switch Only (with or without aux. switch). UL: Series (with or without auxiliary switch, mid-trip & mid-trip with alarm switch). Approx. grams/pole (. oz). Housing: Designed and tested in accordance with requirements of specification MIL-PRF- & MIL-STD-0 as follows: Shock Withstands 00 Gs, ms sawtooth while carrying rated current per Method, Test ondition I. Instantaneous and ultrashort curves 0% of rated current. Vibration Withstands 0.00 excursion from 0- Hz & 0 Gs -00 rated current per Method 0, Test ond. A. Instantaneous & ultrashort curves 0% of rated current. Moisture Resistance Method 0D, i.e., ten -hour + to +, 0-% RH. Salt Spray Method 0, ondition A (0-% % Nal Solution, hrs). Method 0D, ondition A (five Thermal Shock - to + to + to + ). Operating Temperature -0 to +

6 -Series - Agency ertifications Agency ertifications: UL Recognized UL Standard 0 omponent Recognition Program as Protectors, Supplementary (Guide N/QVNU, File E) UL Standard 0 Motor ontrollers, Manual (Guide N/NLRV, File E) UL Standard 00 UL Listed UL Standard Protectors, Supplementary for Marine Electrical & Fuel Systems (Guide PEQZ, File E) Ignition Protection ircuit Breakers, Molded ase, (Guide DIVQ, File E) UL Standard A ommunications Equipment (Guide N/DITT, File E) SA Accepted omponent Supplementary Protector under lass 0, File SA Standard. No. SA ertified ircuit Breaker Model ase (lass 0, File 00), SA Standard. No.. - M TUV ertified EN0, under License No. R00 VDE ertified EN0, VDE 0 under File No. 0

7 -Series Handle UL Recognized Ordering Scheme A B Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting Bezel/Barrier Agency Approval SERIES ATUATOR A Handle, one per pole B Handle, one per multipole unit S Mid-Trip Handle, one per pole T Mid-Trip, one per pole & Alarm Switch POLES One Two IRUIT A Switch Only ( coil) B Series Trip (current) Series Trip (voltage) D Shunt Trip (current) Shunt Trip (voltage) E AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) Three Four F G H, K, Five Six Relay Trip (current) Relay Trip (voltage) Dual oil with Shunt Trip Voltage oil Dual oil with Relay Trip Voltage oil S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal URRENT RATING (AMPERES) ODE AMPERES VOLTAGE OIL (NORMINAL RATED VOLTAGE) ODE RATING A0 D A D A D A D A D A D A D J0 A J A J A J A J A J A K0 0A L0 0A 0 FREQUENY & DELAY 0 D 0/0Hz, Switch Only 0 D Instantaneous D Ultra Short D Short D Medium D Long 0 0/0Hz Instantaneous 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium 0/0Hz Long 0 D 0/0Hz Instantaneous D 0/0Hz Ultra Short D 0/0Hz Short D 0/0Hz Medium D 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush ode: A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units. B: Handle location as viewed from front of breaker: pole - left pole pole - center pole pole - two handles at center poles pole - three handles at center poles pole - four handles at center poles S: Handle moves to mid-position only upon electrical trip of the breaker. Available with circuit codes B,, D, E, F, G, H and K. T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Available with circuit codes B &. Standard multipole units have all poles identical except when specifying auxilary switch and/or mixed poles. pole max w/vde. th pole available as Series Trip w/voltage oil only. Switch Only circuits, rated up to 0 amps and poles, and only available with VDE ertification when tied to a protected pole (ircuit ode B,, D or H.). For.0 to 0 amps, select urrent ode 0. For - 0 amps, select urrent ode 0. For -0 amps, select urrent ode 0. For -00 amps, select urrent ode 0. ircuit odes D,E,F,G,H & K available with Terminal odes,, & only. ircuit odes D, F, H & K available up to 0 amps maximum urrent Rating. onsult factory for available Dual oil options, as special catalog number is required. Dual oil Voltage oils with Shunt Trip onstruction trip instantaneously on line voltage. Dual oil Voltage oils require 0VA minimum power to trip instantaneously and are rated for intermittent duty only. ers, one aux. switch is supplied, mounted in the extreme right pole. Voltage coils t rated for continuous duty. Available only with delay codes 0 and 0. Available with ircuit odes B & D only, and up to 0 amps maximum. urrent Ratings 0-0 are available up to four poles maximum. Ratings - 00 are available up to two poles maximum. Terminal ode available to 0 amps maximum. Terminal odes,, and available to 0 amps maximum. Terminal odes, & available to 00 amps maximum. Terminal ode available to amps maximum. Terminal ode A available to 00 amps maximum. Terminal odes,, & are t VDE approved. No marking available. onsult factory. VDE/TUV Approval requires dual (I-O, ON-OFF) or I-O markings on all handles. Single pole only. VDE/TUV: 0 amps max.; UL/SA: 0 amps max.; Available in - poles only and limited to A Delays. General Purpose amps t rated for full load amps or to be used in applications with a motor. TERMINAL 0 Stud 0-, threaded Screw 0- Stud /-0, threaded Stud M x 0., threaded Screw M x 0. ATUATOR OLOR & LEGEND olor I-O ON-OFF A B D Red F G Green H J Blue K L Yellow M N Gray P Q Orange R S (short handle) T U 0 MOUNTING/BARRIERS MOUNTING STYLE A B D E Stud M, threaded, 0.0 Double lick onnect / lip Terminal, / lip Terminal A Plug-In Stud, / lip Terminal Dual BARRIERS VOLTAGE Threaded Insert - x 0. inches - x 0. inches < 00 < 00 - x 0. inches > 00 ISO M x mm < 00 ISO M x mm < 00 ISO M x mm > 00 Front Panel Snap-In,.00 [.mm] wide bezel with Handleguard < 00 Legend olor AGENY APPROVAL UL Recognized, SA Accepted D VDE ertified, UL Recognized, SA Accepted E TUV ertified, UL Recognized, SA Accepted H UL onstruction: VDE ertified, UL Recognized, SA Accepted I UL Rec. STD 0, UL Rec. 00 (ignition protected), SA Accepted L UL onstruction: UL Recognized, SA Accepted R UL onstruction: TUV ertified, UL Recognized, SA Accepted

8 -Series Handle Parallel Pole ULA Listed Ordering Scheme A P 0 D 0 M T Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting Max. App. Rating Agency Approval SERIES ATUATOR A Handle, one per pole S Mid-Trip Handle, one per pole T Mid-Trip, one per pole & Alarm Switch POLES Two Three IRUIT P Series Trip (parallel pole) TERMINAL /-0, threaded M, threaded A Plug-In Stud ATUATOR OLOR Red Green Blue Yellow Gray Orange LEGEND ON-OFF B D G J L N Q S Dual Legend olor AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0 MOUNTING/BARRIERS MOUNTING STYLE Threaded Insert - x 0. inches ISO M x mm FREQUENY & DELAY D D Ultra Short D D Short D D D Medium D Long MAXIMUM APPLIATION RATING M 0 D URRENT RATING (AMPERES) ODE AMPERES AGENY APPROVAL T ULA Listed (up to 0 amps) K ULA Listed, VDE ertified (up to 00 amps) ULA Listed, TUV ertified (up to 0 amps) ode: A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units. S: Handle moves to mid-position only upon electrical trip of the breaker. T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Terminal ode: & : Supplied with bus bars connecting the Line and Load Terminals. A: Line and Load Terminals must be connected to a copper bus bar having a minimum cross section of 0.0 square inches. Above 00 amps, poles are required.

9 -Series Handle UL Listed Ordering Scheme A B 0 0 K G Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting/ Barriers Max. App. Rating Agency Approval 0 SERIES ATUATOR A Handle, one per pole B Handle, one per multipole unit S Mid-Trip Handle, one per pole T Mid-Trip, one per pole & Alarm Switch POLES One Two Three IRUIT B Series Trip (current) AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) FREQUENY & DELAY D Ultra Short D Short D Medium D Long 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush ode: A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units. B: Handle located, as viewed from front of breaker in left pole. pole maximum. S: Handle moves to mid-position only upon electrical trip of the breaker. T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Standard multipole units have all poles identical except when specifying auxiliary switch and/or mixed poles. & pole circuit breakers required for 0/0 VA (Maximum application rating code ) applications, have all poles identical except when specifying auxiliary / alarm switch which is rmally supplied in extreme right pole per figure B. Terminal barriers are required on all multipole breakers. Third pole is for 0/0 VA applications requiring neutral disconnect. The rd pole has the same construction as poles &. On multi-pole breakers, one auxiliary. switch is supplied, mounted in the extreme right pole. VDE approval on auxiliary switch codes, & only. Auxiliary / Alarm Switch with Independent ircuit ie: separate from breaker circuit, only available with circuit breakers rated 0 amp maximum at 0 VD, VD, and 0 VA. Auxiliary / Alarm Switch with Dependent ircuit ie: same as circuit breaker, is supplied from factory with common terminal of auxiliary / alarm switch connected to line terminal on 0/0 and 0 VA ratings. ircuit breakers rated 0 VA 0 amp maximum can be supplied with Auxiliary/Alarm switch common terminal connected to breaker line terminal. onsult factory for special catalog number. Available up to 0 amps maximum. urrent ratings - 00 with VDE approvals are available up to two poles maximum. Terminal odes, & are t VDE approved. Terminal ode available to 0 amps maximum. Terminal odes,, & available to 0 amps maximum. Terminal odes, & available to 00 amps maximum. Terminal ode A available to 00 amps maximum. VDE and TUV approvals require Dual (I-O, ON-OFF) markings on all handles. Barriers supplied on multi-pole units only. URRENT RATING (AMPERES) ODE AMPERES TERMINAL Stud 0-, threaded Screw 0- Stud /-0, threaded Stud M x 0., threaded Screw M x 0. ATUATOR OLOR & LEGEND olor ON-OFF Dual B D Red G Green J Blue L Yellow N Gray Q Orange S 0 MOUNTING/BARRIERS MOUNTING STYLE Threaded Insert - x 0. inches ISO M x mm Stud M, threaded / lip Terminal / lip Terminal A 0 Plug-In Stud / lip Terminal BARRIERS MAXIMUM APPLIATION RATING A D B D 0/0 A D 0 A F A K 0 A M 0 D AGENY APPROVAL A without approvals F UL Listed, VDE ertified, SA Accepted G UL Listed, SA Accepted J UL Listed, TUV ertified, SA Accepted Legend olor

10 0 -Series Sealed Toggle UL Recognized Ordering Scheme M B Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal Legend Plate 0 Mounting Bezel/Barrier Agency Approval 0 SERIES ATUATOR M Sealed Toggle, one per pole POLES One Two Three IRUIT A Switch Only ( coil) B Series Trip (current) Series Trip (voltage) D Shunt Trip (current) Shunt Trip (voltage) E AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) FREQUENY & DELAY 0 D 0/0Hz, Switch Only 0 D Instantaneous D Ultra Short D Short D Medium D Long 0 0/0Hz Instantaneous 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium 0/0Hz Long ode M: Handle location as viewed from front of breaker: pole - right pole pole - center pole Switch Only circuits, rated up to 0 amps and poles, and only available with VDE. For.0 to 0 amps, select urrent ode 0. For - 0 amps, select urrent ode 0. For -0 amps, select urrent ode 0. For -00 amps, select urrent ode 0. ircuit odes D,E,F,G,H & K available with Terminal odes,, & only. onsult factory for available Dual oil options, as special catalog number is required. Dual oil Voltage oils with Shunt Trip onstruction trip instantaneously on line voltage. Dual oil Voltage oils require 0VA minimum power to trip instantaneously and are rated for intermittent duty only. Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. Voltage coils t rated for continuous duty. Available only with delay codes 0 and 0. Available with ircuit odes B & D only, and up to 0 amps maximum. onsult factory for current ratings -00, in three pole units, available as special catalog number only. Terminal ode available to 0 amps maximum. Terminal odes,, and available to 0 amps maximum. Terminal odes, & available to 00 amps maximum. Terminal ode available to amps maximum. Terminal ode A available to 00 amps maximum. F G H, K, Relay Trip (current) Relay Trip (voltage) Dual oil with Shunt Trip Voltage oil Dual oil with Relay Trip Voltage oil S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0 D 0/0Hz Instantaneous D 0/0Hz Ultra Short D 0/0Hz Short D 0/0Hz Medium D 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush URRENT RATING (AMPERES) ODE AMPERES VOLTAGE OIL (NORMINAL RATED VOLTAGE) ODE RATING A0 D A D A D A D A D A D A D J0 A TERMINAL Stud 0-, threaded 0 Screw 0- Stud /-0, threaded 0 Stud M x 0., threaded 0 Screw M x 0. LEGEND PLATE 0 No Legend J A J A J A J A 0 MOUNTING/BARRIERS MOUNTING STYLE Standard Hex Nut A Standard Hex Nut (multi-pole units only) Stud M, threaded 0.0 Double lick onnect / lip Terminal / lip Terminal A Plug-In Stud 0 / lip Terminal BARRIERS AGENY APPROVAL UL Recognized, SA Accepted L UL Recognized, SA Accepted with listed construction I UL Recognized, SA Accepted, UL00 ignition protection J A K0 0A L0 0A

11 -Series Rocker UL Recognized Ordering Scheme B 0 0 D Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting/ Barriers Agency Approval SERIES ATUATOR Two olor Visi-Rocker Indicate ON, vertical legend D Indicate ON, horizontal legend E Indicate ON, legend F Indicate OFF, vertical legend G Indicate OFF, horizontal legend H Indicate OFF, legend Push-To-Reset, Visi-Rocker N Indicate OFF, vertical legend O Indicate OFF, horizontal legend P Indicate OFF, legend Single color J Vertical legend K Horizontal legend L No legend Push-To-Reset, Single color R Vertical legend U Horizontal legend V No legend POLES One Two Three URRENT RATING (AMPERES) ODE AMPERES VOLTAGE OIL (NORMINAL RATED VOLTAGE) ODE RATING A0 D A D A D A D A D A D A D J0 A J A J A J A J A J A K0 0A L0 0A IRUIT A Switch Only (No oil) B Series Trip (urrent) Series Trip (Voltage) D Shunt Trip (urrent) Shunt Trip (Voltage) E F G H, K, Relay Trip (urrent) Relay Trip (Voltage) Dual oil with Shunt Trip Voltage oil Dual oil with Relay Trip Voltage oil TERMINAL 0 Stud 0-, threaded Screw 0- Stud /-0, threaded Stud M x 0., threaded Screw M x 0. Stud M, threaded 0.0 Double Quick onnect / lip Terminal / lip Terminal A Plug-In Stud / lip Terminal 0 AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) FREQUENY & DELAY 0 D 0/0Hz, Switch Only 0 D Instantaneous D Ultra Short D Short D Medium D Long 0 0/0Hz Instantaneous 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium 0/0Hz Long S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0 D 0/0Hz Instantaneous D 0/0Hz Ultra Short D 0/0Hz Short D 0/0Hz Medium D 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush Push-To-Reset actuators have OFF portion of rocker shrouded. Multi-pole breakers have all poles identical except when specifying Aux. switch and/or mixed poles, and have one rocker per breaker. Rocker location as viewed from front panel: pole left pole; pole center pole. Switch Only circuits, rated up to 0 amps and poles, and only available with VDE ertification when tied to a protected pole (ircuit ode B,, D or H.), For.0 to 0 amps, select urrent ode 0. For - 0 amps, select urrent ode 0. For -0 amps, select urrent ode 0. For -00 amps, select urrent ode 0. ircuit odes D,E,F,G,H & K available with Terminal odes,, & only. ircuit odes D,F,H & K available up to 0 amps maximum urrent Rating. onsult factory for available Dual oil options, as special catalog number is required. Dual oil Voltage oils with Shunt Trip onstruction trip instantaneously on line voltage. Dual oil Voltage oils require 0VA minimum power to trip instantaneously and are rated for intermittent duty only. Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.auxilary switch codes, & are VDE approved. Voltage coils t rated for continuous duty. Available only with delay codes 0 and 0. Available with ircuit odes B & D only, and up to 0 amps maximum. urrent Ratings 0-0 are available up to four poles maximum. Ratings -00 are available up to two poles maximum. Terminal ode available to 0 amps maximum. Terminal odes,, & available to 0 amps maximum. Terminal odes, & available to 00 amps maximum. Terminal ode available to amps maximum. Terminal ode A available to 00 amps maximum. Terminal odes,, & are t VDE approved. olor shown is visi and legend with remainder of rocker black Legend on Push-to-reset bezel/shroud is white when single color rocker is ordered. Dual = ON-OFF/I-O legend with actuator codes - G, and J, K, N, O, R, & U. None = legend with actuator codes H, L, P, V. Rockerguard available with actuator codes - L. Push-to-reset available witha ctuator codes N, O, P, R, U, V. VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker. VDE/TUV: 0 amps max.; UL/SA: 0 amps max.; Available in - poles only and limited to A Delays. General Purpose amps t rated for full load amps or to be used in applications with a motor. ATUATOR OLOR & LEGEND,, or Visi-olor Marking: Marking olor: Single olor olor: Red Green Blue Yellow Gray Orange I-O A F H K M P R ON-OFF B D G J L N Q S Dual/None Rocker/Handle Visi-Rocker n/a Red Green Blue Yellow Gray Orange 0 MOUNTING/BARRIERS Standard Rocker Bezel - x 0. inches - x 0. inches - x 0. inches ISO M x mm ISO M x mm ISO M x mm Rockerguard Bezel A - x 0. inches - x 0. inches E - x 0. inches G ISO M x mm J ISO M x mm L ISO M x mm Push-To-Reset Bezel B - x 0. inches D - x 0. inches F - x 0. inches H ISO M x mm J ISO M x mm M ISO M x mm BARRIERS AGENY APPROVAL UL Recognized, SA Accepted D VDE ertified, UL Recognized, SA Accepted E TUV ertified, UL Recognized, SA Accepted H UL onstruction: VDE ertified, UL Recognized, SA Accepted I UL Rec. STD 0, UL Rec. 00 (ignition protected), SA Accepted L UL onstruction: UL Recognized, SA Accepted R UL onstruction: TUV ertified, UL Recognized, SA Accepted

12 -Series Rocker UL Listed Ordering Scheme B 0 0 A K G Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting/ Barriers Max. App. Rating Agency Approval SERIES ATUATOR Two olor Visi-Rocker Indicate ON, vertical legend D Indicate ON, horizontal legend F Indicate OFF, vertical legend G Indicate OFF, horizontal legend VERTIAL STYLE HORIZONTAL STYLE INDIATE OLOR LOATION ROKER STYLE DESRIPTIONS INDIATE "ON" INDIATE "OFF" SINGLE OLOR ODE "" ODE "D" ODE "F" ODE "G" Single color J Vertical legend K Horizontal legend ODE "J" ODE "K" POLES One Two Three IRUIT B Series Trip (current) URRENT RATING (AMPERES) ODE AMPERES TERMINAL Stud 0-, threaded Screw 0- w/saddle & washer clamps Stud /-0, threaded Stud M x 0., threaded Screw M x 0. w/saddle & washer clamps Stud M, threaded / lip Terminal, / lip Terminal A, Plug-In Stud, / lip Terminal AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) FREQUENY & DELAY D Ultra Short D Short D Medium D Long 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush Multi-pole breakers have all breakers identical except when specifying Aux. switch and/ or mixed poles, and have one rocker per breaker. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. Available up to 0 amps maximum. urrent ratings - 00 with VDE approvals are available up to two poles maximum. Terminal ode available to 0 amps maximum. Terminal odes,, & available to 0 amps maximum. Terminal odes,, & A available to 00 amps maximum. Terminal odes, & are t VDE approved. olor shown is visi and legend with remainder of rocker black Dual = ON-OFF/I-O legend on actuator. VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker. Rockerguard available with all actuator codes. Barriers supplied on multi-pole units only. & pole circuit breakers required for 0/0 A rating. ATUATOR OLOR & LEGEND or Visi-olor olor: Red Green Blue Yellow Gray Orange Marking: ON-OFF B D G J L N Q S Dual 0 Marking olor: Single olor Rocker/Handle 0 MOUNTING/BARRIERS Standard Rocker Bezel A B D Threaded Insert, per pole - x 0. inches ISO M x mm Rockerguard Bezel Threaded Insert, per pole - x 0. inches ISO M x mm MAXIMUM APPLIATION RATING A D B D 0/0 A D 0 A F A K 0 A M 0 D BARRIERS Visi-Rocker n/a Red Green Blue Yellow Gray Orange AGENY APPROVAL A without approvals F UL Listed, SA ertified, & VDE ertified G UL Listed & SA ertified J UL Listed, SA ertified & TUV ertified

13 -Series Flat Rocker UL Recognized Ordering Scheme B E Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting/ Barriers Agency Approval 0 0 SERIES ATUATOR Two olor Visi-Rocker Indicate OFF, vertical legend Indicate OFF, horizontal legend Single color Vertical legend Horizontal legend Push-To-Reset, Visi-Rocker Indicate OFF, vertical legend Indicate OFF, horizontal legend Push-To-Reset, Single color Vertical legend Horizontal legend POLES One Two Three IRUIT A Switch Only (No oil) B Series Trip (urrent) Series Trip (Voltage) D Shunt Trip (urrent) Shunt Trip (Voltage) E AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) FREQUENY & DELAY 0 D 0/0Hz, Switch Only 0 D Instantaneous D Ultra Short D Short D Medium D Long 0 0/0Hz Instantaneous 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium 0/0Hz Long F G H, K, Relay Trip (urrent) Relay Trip (Voltage) Dual oil with Shunt Trip Voltage oil Dual oil with Relay Trip Voltage oil S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0 D 0/0Hz Instantaneous D 0/0Hz Ultra Short D 0/0Hz Short D 0/0Hz Medium D 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush Push-to-reset actuators have OFF portion of rocker shrouded. Multi-pole breakers have all poles identical except when specifying Aux. switch and/or mixed poles, and have one rocker per breaker. Rocker location as viewed from front panel: pole left pole; pole center pole. Switch Only circuits, rated up to 0 amps and poles, and only available with VDE ertification when tied to a protected pole (ircuit ode B,, D or H.). For.0 to 0 amps, select urrent ode 0. For - 0 amps, select urrent ode 0. For -0 amps, select urrent ode 0. For -00 amps, select urrent ode 0. ircuit odes D,E,F,G,H & K available with Terminal odes,, & only. ircuit odes D,F,H & K available up to 0 amps maximum urrent Rating. onsult factory for available Dual oil options, as special catalog number is required. Dual oil Voltage oils with Shunt Trip onstruction trip instantaneously on line voltage. Dual oil Voltage oils require 0VA minimum power to trip instantaneously and are rated for intermittent duty only. Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.auxilary switch codes, & are VDE approved. Voltage coils t rated for continuous duty. Available only with delay codes 0 and 0. Available with ircuit odes B & D only, and up to 0 amps maximum. urrent ratings 0-0 are available up to four poles maximum. urrent ratings - 00 are available up to two poles maximum. Terminal ode available to 0 amps maximum. Terminal odes,, & available to 0 amps maximum. Terminal odes, & available to 00 amps maximum. Terminal ode available to amps maximum. Terminal ode A available to 00 amps maximum. Terminal odes,, & are t VDE approved. olor shown is visi & legend with remainder of rocker black. Dual = ON-OFF/I-O legend. Legend on Push-to-reset bezel/shroud is white with single color actuator codes &. Legend on Push-to-reset bezel/shroud matches visi-color of rocker with actuator codes &. VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker. VDE/TUV: 0 amps max.; UL/SA: 0 amps max.; Available in & poles only and limited to A Delays. General Purpose amps t rated for full load amps or to be used in applications with a motor. Recessed OFF SIDE available with actuator codes,,&. Legends on rocker are available in ink stamping only. URRENT RATING (AMPERES) ODE AMPERES ODE RATING A0 D A D A D A D A D A D A D J0 A TERMINAL 0 Stud 0-, threaded Screw 0- Stud /-0, threaded Stud M x 0., threaded Screw M x 0. 0 MOUNTING/BARRIERS Standard Rocker Bezel - x 0. inches - x 0. inches - x 0. inches ISO M x mm ISO M x mm ISO M x mm Recessed Off Rocker - x 0. inches - x 0. inches - x 0. inches A ISO M x mm ISO M x mm E ISO M x mm Push-To-Reset Bezel B - x 0. inches D - x 0. inches F - x 0. inches H ISO M x mm J ISO M x mm M ISO M x mm VOLTAGE OIL (NORMINAL RATED VOLTAGE) J A J A J A J A Stud M, threaded 0.0 Double Quick onnect / lip Terminal / lip Terminal A Plug-In Stud / lip Terminal ATUATOR OLOR & LEGEND,, or Visi-olor Marking: Marking olor: Single olor olor: Red Green Blue Yellow Gray Orange I-O A F H K M P R ON-OFF B D G J L N Q S Dual/None Rocker/Handle Visi-Rocker n/a Red Green Blue Yellow Gray Orange BARRIERS J A K0 0A L0 0A VOLTAGE < 00 < 00 > 00 < 00 < 00 > 00 < 00 < 00 > 00 < 00 < 00 > 00 < 00 < 00 > 00 < 00 < 00 > 00 AGENY APPROVAL UL Recognized, SA Accepted E TUV ertified, UL Recognized, SA Accepted I UL Rec. STD 0, UL Rec. 00 (ignition protected), SA Accepted L UL onstruction: UL Recognized, SA Accepted R UL onstruction: TUV ertified, UL Recognized, SA Accepted

14 -Series Flat Rocker UL Listed Ordering Scheme B 0 0 A K G Series Poles ircuit Aux/Alarm Switch Frequency & Delay urrent Rating Terminal olor 0 Mounting/ Barriers Max. App. Rating Agency Approval 0 SERIES ATUATOR Two olor Visi-Rocker Indicate OFF, vertical legend Indicate OFF, horizontal legend Single color Vertical legend Horizontal legend Push-To-Reset, Visi-Rocker Indicate OFF, vertical legend Indicate OFF, horizontal legend Push-To-Reset, Single color Vertical legend Horizontal legend POLES One Two Three IRUIT B Series Trip (current) AUXILIARY/ALARM SWITH 0 without Aux Switch S.P.D.T., 0.0 Q.. Terminal S.P.D.T., 0. Solder Lug S.P.D.T., 0.0 Q.. Terminal (Gold ontacts) FREQUENY & DELAY D Ultra Short D Short D Medium D Long 0/0Hz Ultra Short 0/0Hz Short 0/0Hz Medium S.P.S.T., 0. Solder Lug S.P.S.T., 0. Q.. Terminal S.P.D.T., 0. Q.. Terminal 0/0Hz Long 0/0Hz Short, Hi-Inrush 0/0Hz Medium, Hi-Inrush 0/0Hz Long, Hi-Inrush D Short, Hi-Inrush D Medium, Hi-Inrush D Long, Hi-Inrush Push-to-reset actuators have OFF portion of rocker shrouded. Multi-pole breakers have all breakers identical except when specifying Aux. switch and/ or mixed poles, and have one rocker per breaker. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. Available up to 0 amps maximum. urrent ratings - 00 with VDE approvals are available up to two poles maximum. Terminal ode available to 0 amps maximum. Terminal odes,, & available to 0 amps maximum. Terminal odes,, & A available to 00 amps maximum. Terminal odes, & are t VDE approved. olor shown is visi and legend with remainder of rocker black Dual = ON-OFF/I-O legend on actuator. VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker. Legend on push-to-reset bezel/shroud is white when single color rocker is ordered. Legend on push-to-reset bezel/shroud matches visi-color of rocker with actuator codes &. Recessed OFF-SIDE available with actuator codes,,, &. Legends on rocker are available in ink stamping only. Barriers supplied on multi-pole units only. & pole circuit breakers required for 0/0 A rating. URRENT RATING (AMPERES) ODE AMPERES TERMINAL Stud 0-, threaded. long Screw 0- w/saddle & washer clamps Stud /-0, threaded. long Stud M x 0., threaded. long Screw M x 0. w/saddle & washer clamps 0 MOUNTING/BARRIERS Standard Rocker Bezel A E F B D Threaded Insert, per pole - x 0. inches ISO M x mm Recessed Off Rocker Threaded Insert, per pole - x 0. inches ISO M x mm Push-To-Reset Bezel Threaded Insert, per pole - x 0. inches ISO M x mm MAXIMUM APPLIATION RATING A D B D 0/0 A D 0 A F A K 0 A M 0 D ATUATOR OLOR & LEGEND or Visi-olor olor: Red Green Blue Yellow Gray Orange Marking: ON-OFF B D G J L N Q S Dual Marking olor: Single olor Rocker/Handle Stud M, threaded mm long / lip Terminal, / lip Terminal A, Plug-In Stud, / lip Terminal BARRIERS Visi-Rocker n/a Red Green Blue Yellow Gray Orange AGENY APPROVAL A without approvals G UL Listed & SA ertified J UL Listed, SA ertified & TUV ertified

15 -Series Handle ircuit & Terminal Diagrams.0 [.]. [.]. DIA [Ø.0] All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified. Available on Series Trip and Switch Only ircuits when called for on multi-pole units. Only one aux. switch is rmally supplied, as viewed in mulit-pole identification scheme.

16 -Series Handle ircuit & Terminal Diagrams LOAD All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified. Schematic shown represents current trip circuits. Available only as special catalog number.

17 -Series Handle Form & Fit Drawings LOAD All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified.

18 -Series Handleguard Form & Fit Drawings LOAD All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified.

19 -Series Parellel Pole Form & Fit Drawings LOAD All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified.

20 0 -Series Sealed Toggle Form & Fit Drawings LOAD All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified.

21 -Series Rocker ircuit & Terminal Diagrams LOAD All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified. Schematic shown represents current trip circuit.

22 -Series Rocker Form & Fit Drawings LOAD Dimensions apply to all variations shown. Notice that circuit breaker line and load terminal orientation on indicate OFF is opposite of indicate ON. For pole orientation with horizontal legend, rotate front view clockwise 0. All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified.

23 -Series Flat Rocker Form & Fit Drawings LOAD For pole orientation with horizontal legend, rotate front view clockwise 0. All dimensions are in inches [millimeters]. Tolerance ±.00 [.] unless otherwise specified.