Standard C800 16A Switches & CBN800 Switches from 10 ma

Size: px

Start display at page:

Download "Standard C800 16A Switches & CBN800 Switches from 10 ma"

Emma Daniels
5 years ago
Views:

1 Offer

2 Standard C A Switches & CBN Switches from ma General Characteristics These switches are designed for currents ranging from ma to ma, and voltages from V to V, depending on the type, standard C, or low level with self-cleaning contacts CBN, even in agressive and contaminating industrial environments. However, their breaking power with direct or rectifi ed current is naturally lower than that when used alternating current. Particularities: Mechanism Electrical tiers - or positions for the normal versions. - positons for the reinforced versions designed for severe operating and handling conditions, and especially where the number of tiers is high. - independent "double-break" type contacts per tier, each activated by a cam. - From W for the standard C version. - From ma to A and from V to V in the CBN version with self-cleaning contacts. - Standard mechanism : up to tiers i.e. contacts, from to tiers contact us (beyond tiers, a double mechanism is possible) - Reinforced mechanism : up to tiers i.e. contacts. Environmental Characteristics Compliance with standards IEC & NF EN - IEC & NF EN - Protective finish Degree of protection Temperature Vibration resistance Shock resistance Tropicalisation (operation at + C with % humidity). IEC & NF EN IP (on request) Storage: - C to + C Operating: - C to + C (- C on request). g from to Hz g (/ sine waveform, for ms) Characteristics of the contacts Mechanical life expectancy Standard mechanism to x Reinforced mechanism x Electrical durality Rated thermal current A. Rated insulation voltage V. Change in contact Resistance : CBN I in ma U in V Contact resistance when new Contact resistance after x switching ops. mω mω mω mω mω mω

C - CBN Switches Composition Example of : SWITCH: HANDLE: C AR CN P E M ET Rating Schematic number Mounting (From the front AV From the rear AR ) P/N

and clamp mm faston tabs) Reinforced mechanism Label Label cover Shim Handle Options Specific units - inhibition: stops prevent switching from one

3 C - CBN Switches Composition Example of : SWITCH: HANDLE: C AR CN P E M ET Rating Schematic number Mounting (From the front AV From the rear AR ) P/N suffi x for waterproof versions Handle Label Shaft (Standard, Split) Standard C and CBN switches Electrical assembly (Connection via M screws and clamp plate or. mm faston tabs) Shaft : standard, split Label Label cover Handle C et CBN switches with reinforced mechanism Electrical assembly (Connection via M screws and clamp plate or. mm faston tabs) Reinforced mechanism Label Label cover Shim Handle Options Specific units - inhibition: stops prevent switching from one position to the next or to several consecutive positions. - locking: mechanism using a key or a padlock. - switch with automatic return. - locking: electric locking (electro-magnet). - controlled via a geared motor. - interlocked switch mounted on a chassis. - switch with double columns. Contact us.

C - CBN Switches Control devises Handles Standard

M M N M M N.. Ball-end lever Steel stem M.

Plastic handle locking device : standard key (for

Plastic handle with plunger for locking with,,

A. Control shafts Standard shaft (CN) for

Split shaft (CR) for mounting the handle on a

s Colour Plastic mounting plate x mm and

4 C - CBN Switches Control devises Handles Standard plastic paddle Colour x Standard plastic paddle x M M N M M N.. Ball-end lever Steel stem M. Plastic handle M M N. Plastic handle locking device : standard key (for other keys, contact us) M. Plastic handle with plunger for locking with,, padlocks M Lever for reinforced mechanism MQ A MQ A. Control shafts Standard shaft (CN) for projecting or fl ush mounting CN. Split shaft (CR) for mounting the handle on a moving support (door, removable front panel,...) CR. s Colour Plastic mounting plate x mm and transparent label cover x mm P P N. Plastic mounting plate x mm and transparent label cover x mm P P N. Metal label cover for P/N P only J.

C - CBN Switches Control devices Padlockable mounting plate and paddle and paddle can be padlocked in or positions, in standard IP or waterproof IP version (add ET to the P/N).

5 C - CBN Switches Control devices Padlockable mounting plate and paddle and paddle can be padlocked in or positions, in standard IP or waterproof IP version (add ET to the P/N). Positions visible both from the front and from the side. Plastic material. padlockable position Standard shaft padlockable positions Standard shaft QCN PJ MR QCN PJ MR QCN PJ MR. O N Type PJ Type PJ Type PJ O N O N O N O N ON O N PVC Labels Colour Blank label (to be engraved) x (P mounting plate) E.. Blank label (to be engraved) x (P mounting plate) E.. Aluminium Labels Colour Blank label x (P mounting plate) E.. Blank label x (P mounting plate) E.. Label with standard markings Use the P/N root as follows: E.. for P mounting plate E.. for P mounting plate background black text E E E E E E E E E E E E F A ON M E E E E E E E E E E E E

6 C - CBN Switches Dimensions Handles M M mm mm mm mm M M M Ø, Ø, Ø, M QCN. CBN. mm O N mm mm Ø mm mm and label cover P Label cover P Label cover J, mm mm mm mm mm, mm

7 C - CBN Switches Dimensions and panel cut-outs: C switch Projecting mounting (device attached via the rear plate) : AR M *Where AR attachment is used with M or M lockable handles : The mm dimensions becomes mm. mm + ( x N) * mm Ø, mm Ø mm Flush-mounted (device attached via the front panel, from the front) : AV M *Where AV attachment is used with M or M lockable handles: The mm dimension becomes mm. mm, - mm + ( x N) * Ø, mm mm Ø, mm mm Ø, mm Ø, mm Ø mm Split mounting (unit attached via the rear plate and mounting plate/handle on mobile front panel) : CR, - mm mm - mm M max. mm mm Ø, mm Ø, mm Ø, mm mm Panel cut-out where AV attachment is used with M or M lockable handles. mm Ø, mm Ø, mm mm Ø, mm Ø mm AR AV. Dimensions and panel cut-outs : CBN switch Units with a reinforced mechanism Where there are more than tiers (i.e. contacts) or where the operating conditions are particularly severe, the unit is fi tted with a reinforced mechanism (housing moulded in light alloy, cams and positioning stops in heat-treated steel). mm Ø, mm Ø, mm Ø mm mm + ( x N) - mm mm Ø, mm Ø mm

8 C - CBN Switches Standardised schematics (See our "Control components" catalogue for other standardised schematics) positions On-Off switch positions switch positions switch positions switch positions switch positions switch positions switch positions switch positions inverter (with intermediate stop) positions inverter

9 C - CBN Switches Example of electrical schematic Mechanism and position "" indicates that the contact is closed contact " " indicates contacts which overlap two positions. Tier Tier - Choice of the positions (...) - Contact.. closed in position - Contact.. closed in and - Contact.. closed in - Contact.. closed in and overlapping each other. (Only possible with positions) Switches with special schematics (definition chart) Electrical schematic - Tick the selector type.. Strike out the unused mechanism positions.. Used the symbol "" to show closed contacts and fi ll in the chart opposite. Used the symbol " " to show contacts overlapping two positions. Tier Tier Tier contact Mechanism and position - Label marking Position Text to be engraved! contacts max. Tier - Connection type - Indicate the label engraving. Tier M screw and clamp plate - Tick the type of connection Tier. faston tabs Tier Tier

800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)

800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only) 1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description