Solid Core Wood Door / Steel Frame Packages

Transcription

1 Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0 x 79-1/4 Machined Slab 3/0 x 79-1/4 Machined Slab Set of Ball Bearing US26D Hinges Set of Ball Bearing US26D Hinges MH578/478-3/0 x 6/8 DW Frame MH578/478-3/0 x 6/8 DW Frame $ $ /4 Solid Core Birch 1-3/4 Solid Core Oak 3/0 x 83-1/4 Machined Slab 3/0 x 83-1/4 Machined Slab Set of Ball Bearing US26D Hinges Set of Ball Bearing US26D Hinges MH578/478-3/0 x 7/0 DW Frame MH578/478-3/0 x 7/0 DW Frame $ $ Page C-1

2 Fire Rated Wood Door / Steel Frame Packages 20 or 90 Minute Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations Page C-2 20 Minute Birch 20 Minute Oak 3/0 x 79-1/4 Machined Slab 3/0 x 79-1/4 Machined Slab Set of Ball Bearing US26D Hinges MH578/478-3/0 x 6/8 DW Frame Set of Ball Bearing US26D Hinges MH578/478-3/0 x 6/8 DW Frame $ $ Minute Birch 20 Minute Oak 3/0 x 83-1/4 Machined Slab 3/0 x 83-1/4 Machined Slab Set of Ball Bearing US26D Hinges MH578/478-3/0 x 7/0 DW Frame Set of Ball BearingUS26D Hinges MH578/478-3/0 x 7/0 DW Frame $ $ Minute Birch 90 Minute Oak 3/0 x 79-1/4 Machined Slab 3/0 x 79-1/4 Machined Slab Set of Spring US26D Hinges MH578/478-3/0 x 6/8 DW Frame Set of Spring US26D Hinges MH578/478-3/0 x 6/8 DW Frame $ $ Minute Birch 90 Minute Oak 3/0 x 83-1/4 Machined Slab 3/0 x 83-1/4 Machined Slab Set of Spring US26D Hinges MH578/478-3/0 x 7/0 DW Frame Set of Spring US26D Hinges MH578/478-3/0 x 7/0 DW Frame $ $

3 Steel Door / Steel Frame Packages Hass Wholesale Supplied with 90 minute mylar label - Exterior Packages 3/0 x 6/8 3/0 x 7/0 Hollow Metal Door Hollow Metal Door Set of Non-Removable Pin USP Hinges Set of Non-Removable Pin USP Hinges ME534-3/0 x 6/8 Frame ME534-3/0 x 7/0 Frame Punch & Dimple w/ anchors & bolts Punch & Dimple w/ anchors & bolts 321CN-36 Door Sweep 321CN-36 Door Sweep 303AV - 3/0 x 7/0 Weatherstrip 303AV - 3/0 x 7/0 Weatherstrip 171A-36 Threshold 171A36 Threshold $ $ Page C-3

4 This Page is not in Use Page C-4

5 1-3/4 Fire-Rated 20 Minute Interior Prehung Door Units ALL DOORS on this page must be machined and labeled by Hass Wholesale to carry a valid rating! In order to meet code requirements, each door must be machined for three (3) hinges and one (1) cylindrical lock! Hass Wholesale Hass Wholesale is licensed by Intertek Testing Services. A licensed company must do ALL machining of 20 minute wood doors and frames and 90 minute wood doors. All prep and labeling must be in compliance with Federal NFPA-80. Hass Wholesale is required to log all products that are prepped and labeled in our facility. ANY ALTERATIONS made to the doors and/or frames after shipment are the SOLE RESPONSIBILITY OF THOSE PERSONS MAKING THE ALTERATIONS and will VOID THE LABEL! 5-1/4 Pine 20 Minute Jamb with smoke stop 3 Round Corner 4 x 4 US4 Spring Hinges Machined for one (1) cylindrical lock Size Birch Oak 20 minute 20 minute 2/6 x 6/8 $ $ /8 x 6/ /0 x 6/ /6 x 7/ /8 x 7/ /0 x 7/ OPTIONS ADD Rip Jamb Width /8 Oak 20 minute Jamb /2 x 4-1/4 US26D Spring Hinges / Set of Page C-5

6 1-3/4 Fire-Rated 20 & 90 Minute Door Interior Slabs ALL DOORS on this page must be machined and labeled by Hass Wholesale to carry a valid rating! In order to meet code requirements, each door must be machined for three (3) hinges and one (1) cylindrical lock! Hass Wholesale is licensed by Intertek Testing Services. A licensed company must do ALL machining of 20 minute wood doors and frames and 90 minute wood doors. All prep and labeling must be in compliance with Federal NFPA-80. Hass Wholesale is required to log all products that are prepped and labeled in our facility. ANY ALTERATIONS made to the doors and/or frames after shipment are the SOLE RESPONSIBILITY OF THOSE PERSONS MAKING THE ALTERATIONS and will VOID THE LABEL! All Doors listed below include machining for one (1) cylindrical lock with 2-1/8 face bore and three (3) hinge pockets at Republic locations All Doors listed below include the label with a rating of 20 or 90 minute Size Birch Oak 20 minute 20 minute 2/6 x 79-1/4 $ $ /8 x 79-1/ /0 x 79-1/ /6 x 83-1/ /8 x 83-1/ /0 x 83-1/ minute 90 minute 3/0 x 79-1/4 $ $ /0 x 83-1/ Prep for Special locations - ADD (one (1) cylindrical lock and three (3) hinge pockets only) Page C-6

7 DM Series Flush Doors Steel Door Slabs Hass Wholesale 3/0 x 6/8 x 1-3/4 Flush Slab - 18 gage $ /0 x 7/0 x 1-3/4 Flush Slab - 18 gage Apply 20 or 90 minute to above door - ADD (wire glass must be used in fire doors) Size w/ 1/4 tempered glass w/ 1/4 wire glass 4 x 25 metal vision panel installed $ $ x 20 metal vision panel installed x 10 metal vision panel installed x 28 metal vision panel installed For Metal Vision Panel and Glass ONLY Deduct These are all-purpose doors in 18 gage cold-rolled steel. Lock edge is continuously lap seam welded and planished (McKenzie Edge), providing a nearly seamless and indestructible edge. Standard Features: 3/4 cell honeycomb core 100% bonded to skins to provide exceptional strength, flatness and acoustical performance Continuous flush, 16 gage top and inverted bottom channels projection welded to both face sheets every 2-1/2 on center Hinge edge is non-beveled and reinforced with a continuous 16 gage channel projection welded to each skin at a maximum of 5 on center. Hinge channels have an additional 9 gage reinforcement at each hinge location, providing over 3/16 reinforcement. Doors are thoroughly cleaned, phospatized and primed with a coat of force-cured rust inhibiting primer. Page C

8 Steel Frames Standard Frame Drywall Frame ME is a Butted Application Frame MH is a Slip-On Drywall Application Frame Size ME534 MH578/478 3/0 x 6/8 $ $ /0 x 7/ Page C-8 ADD Punch & Dimple with 6 each Butterfly Anchors and Dynabolts or Screws $ Face Head Jamb (ME Frame Only) ME/MH Series Frames are formed from 16 gage cold-rolled steel. Frames are knockeddown. Knockdown corners have aligning tabs and slots for secure, easy interlocking of jambs to head. Standard Features: Frames are provided with 9/32 silencer preparation, (3) per strike jamb and (2) per head for double openings for field application after finish painting. Frames for 1-3/4 doors shall have 9 gage steel universal hinge tap plate projection welded with provisions for 4-1/2 x 4-1/2 template type hinges and 14 gage strike reinforcement plate, extruded and formed to the equivalent of 10 gage, projection welded with provision for 4-7/8 ASA strike. ME Frame Rough Opening = Width=Door Opening Width + 4-1/2 Height = Door Opening Height +2-1/4 MH Frame Rough Opening = Width = Door Opening Width + 2 Height = Door Opening Height + 1

9 Misc. Products Product S14629P Cylinder Edge Filler Plate $ P Mortise Edge Filler Plate P Cylindrical Face Filler 3.60 SP478 Strike Filler Plate 2.50 HFP45R Hinge Filler Plate 2.00 HSP45 Hinge Shim 2.00 WMA Wire Masonry Anchor 1.60 MT534 Masonry T Anchor 2.05 WS534 Wood Stud Anchor 2.70 EO Existing Opening Anchor 3.00 Dynabolt Wood Screw 4.60 FFA534 Fixed Floor Anchor 3.10 CR Closer Reinforcement SPGA Strike Plaster Guard 3.40 RM Rubber Mute 0.10 #8 x 5/8 Head Screw 0.10 Sill-Strap Anchor 1.60 Page C-9

10 Hinges Size Finish Plain Bearing 4-1/2 x 4-1/2 US26D - Dull Chrome $ 7.15 Ball Bearing 4-1/2 x 4-1/2 US26D - Dull Chrome 7.80 Spring 4-1/2 x 4-1/2 US26D - Dull Chrome Non-Removable Pin 4-1/2 x 4-1/2 USP - Primed 6.95 Plain Bearing 4-1/2 x 4-1/2 US4 - Dull Brass 7.15 Ball Bearing 4-1/2 x 4-1/2 US4 - Dull Brass 7.95 Spring 4-1/2 x 4-1/2 US4 - Dull Brass Misc. Hardware Description 3-1/2 x 15 Push Plate US32D $ /2 x 15 Pull Plate US32D x 34 Kick Plate US32D US26D Concave Wall Stop 5.35 US26D Floor Stop Manual Extension Flush Bolt US26D Surface Bolt US26D UL Listed x 11 Latch Guard US32D Page C-10

11 Weatherization Products Model Size Description Hass Wholesale 321CN 36 Door Bottom Sweep $ CN 48 Door Bottom Sweep AV 3/0 x 7/0 Bulb Weatherstrip AV 6/0 x 7/0 Bulb Weatherstrip S88D 17 SiliconSeal Weatherstrip S88D 21 SiliconSeal Weatherstrip A 36 Saddle Threshold A 72 Saddle Threshold AV 36 LatchingPanic Threshold AV 72 LatchingPanic Threshold CNB 84 Brush Astragal Strip Page C-11

12 Hardware Surface Door Closer $ Single Cylinder Deadbolt Entry/Office Lever Privacy Lever Passage Lever /8 ASA Strike US4 Dull Brass or US26D Dull Chrome 5.00 Rim Panic Exit Device Only Fire-Rated Rim Panic Exit Device Only Vertical Rod Panic Exit Device Only Fire-Rated Vertical Rod Panic Exit Device Only Entry Lever for Panic Device Passage Lever for Panic Device Offset Pull Only Offset Pull with Cylinder Hole Only Rim Cylinder Only **Keying Charge per Cylinder Page C-12

13 COMMERICAL QUOTE REQUIREMENTS ALL QUESTIONS MUST BE ANSWERED FOR AN ACCURATE QUOTE! Door Size: Door Thickness: 1-3/8 or 1-3/4 Door Type (Hollow Metal, Hollow or Solid Core Wood): Door Style (Specie and Style): Rating: Non-Rated - 20 minute - 60 minute - 90 minute Frame Size and Design (3 piece KD or Welded): Frame Depth or Wall Thickness: Frame Type: Flat Wood - Rabbetted Wood - Drywall or Standard Steel Frame Anchor (If Required): Existing Opening with Dynabolt or Wood Screw Hardware Finish: US26D or US4 or US3 or US10B or Other Hinges: Plain or Ball Bearing, Spring or Non-Removable Pin Lock: Key, Privacy or Passage - Lever or Knob Panic: Rim Panic or Vertical Rod Panic Does the Opening require any of the following: Closer, Sweep, Weatherstrip or Threshold Opening Number and Swing (RH or LH): Page C-13

14 COMMERCIAL DOOR HANDING CHART * = Key Side of Door RH and LH symbols indicates Swing In operation for single and double swing doors. The hand and swing symbols for double swing doors are suffixed with A to indicate the ACTIVE LEAF of the pair of doors. RHR and LHR symbols indicates Swing Out operation for single and double doors. Page C-14