Complete units: Selector switches ø 22mm

Transcription

1 Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions Black NO L21TA3-1E1 L22TA3-1E1 1 Black 2 NO L21TA3-3E2 L22TA3-3E2 Black NO + NC L21TA3-3E11 L22TA3-3E11 Maintained positions - 45 L21UA3-3E2 Black NO L21UA3-3E2 L22UA3-3E2 WITH KEY 2 positions Ø 29.9 Supplied with 2 keys profile n 455 Maintained positions - 45 Key free in position Black NO L21LA-1E1 L22LA-1E1 1 Black 2 NO L21LA-3E2 L22LA-3E2 Black NO + NC L21LA-3E11 L22LA-3E L21LA-1E Spring Return - 45 Key free in position Black NO L21LB-1E1 L22LB-1E1 Black 1 2 NO L21LB-3E2 L22LB-3E2 Black NO + NC L21LB-3E11 L22LB-3E11 Maintained - 9 Key free in both positions Black NO L21LG-1E1 L22LG-1E1 1 Black 2 NO L21LG-3E2 L22LG-3E2 Black NO + NC L21LG-3E11 L22LG-3E11 WITH KEY 3 positions Ø 29.9 Supplied with 2 keys profile n Maintained positions - 45 Key free in position 26.2 Black 2 NO L21NA-3E2 L22NA-3E Spring Return - 45 Key free in position L21NA-3E2 Black 2 NO L21ND-3E2 L22ND-3E

2 GENERAL Characteristics Standards > Storage temperature - 4 C to + 7 C > Operating temperature - 25 C to + 7 C > Climatic resistance Constant humid heat IEC Cyclic damp heat IEC Resistance to sea air IEC > Degree of protection IP 66 for standard heads IEC 6529 IP 67 for shrouded heads IP 66 for equipped control stations IP 2 at the rear of the panel for contact blocks and one piece pilot lights Type 1, 2, 3, 3R, 3S, 4, 4X, 12, and 13 for heads and control stations NEMA standard > Protection against mechanical impacts IK 5 illuminated and non-illuminated heads IEC IK 7 empty control station > Electrical insulation Class II - heads and control station IEC > Terminal marking IEC > Tightening torques Locking ring: recommended 3 N.m terminals: max. 1.2 N.m > Approvals UL United states and Canada UL 58, CSA 22.2 BV Bureau Véritas Marine rules Certification OC/CB IEC IEC IEC > Vibrations withstand vibration IEC Fc test: 2 to 25 Hz, 1.6 mm; 25-1 Hz, 4 g 13

3 HEADS Characteristics Standards > Mechanical endurance Spring return: 5,, Push-push: 5, Selector switches: 3, Mushroom head maintained function EN 418: 1, Mushroom head maintained function: 15, > Activation force in N Spring return + NO: 6.5 Spring return + NC: 4.5 Additional NO contact: 4.5 Additional NC contact: 3. Push-pull mushroom head + NO + NC: 27 Push-turn mushroom head + NO + NC: 22 Push-pull mushroom head EN NO + NC: 37 Push-turn mushroom head EN NO + NC: 6 > Activation force in Nm Selector switch + NO:.4 Additional NO contact:.3 EMERGENCY STOP ACTUATORS - EN 418/ISO 1385: According to IEC/EN , the emergency stop function can be provided by an EN418/ISO1385 mushroom head combined with a "positive opening" NC contact block. The mechanism of our EN418/ISO1385 mushroom heads is so designed that a "push" action of sufficient force to open the contact systematically triggers an irreversible locking of this opening. This generates an "emergency stop" signal which can be cancelled only by deliberate manual resetting of the mushroom head (pull and turn or unlocking by key). This function allows to generate an "emergency stop" signal for any equipment subject to directive 98/37CE (machinery safety) completed by the IEC standard. The EN418/ISO1385 mushroom heads also comply with the safety requirements detailed in standards EN418 and ISO

4 CONTACT BLOCKS Screw and plug-in connection characteristics Standards > Rated insulation voltage 69 V AC IEC/EN V AC UL 58 > NC contacts Positive opening IEC/EN > Rated impulse voltage Uimp 6kV Pollution degree 3 > Conventional thermal current in free air conditions AC15: 1 A IEC DC13: 2.5 A > Electrical ratings Alternating current Direct current IEC AC15 - A 6 DC13 - Q 6 Ue = 12 V, Ie = 6 A Ue = 125 V, Ie =.55 A Ue = 24 V, Ie = 3 A Ue = 25 V, Ie =.27 A Ue = 38 V, Ie = 1.9 A Ue = 4 V, Ie =.15 A Ue = 48 V, Ie = 1.5 A Ue = 5 V, Ie =.13 A Ue = 5 V, Ie = 1.4 A Ue = 6 V, Ie =.1 A Ue = 6 V, Ie = 1.2 A Minimum operating current - standard blocks - gold plated contacts Ue = 24 V DC and Ie = 5 ma Ue = 5 V DC and Ie = 1 ma Failure rate < 1-8 Failure rate < 1-8 UL58 Alternating Current 5/6Hz - A6 Continuous Current - 1 amps Rated Voltage - 6Vac Direct Current - Q6 Continuous Current amps Rated Voltage - 6Vdc Max. Amps Max. Amps Max. Amps Max. Amps Voltage Make Break Voltage Make Break > Electrical operating life 1 million cycles for: - AC15 - B 3 - DC13 - R 3 Ue = 12 V, Ie = 3 A Ue = 125 V, Ie =.22 A Ue = 24 V, Ie = 1.5 A Ue = 25 V, Ie =.1 A > Applicable wire sizes Rigid or flexible wire without ferrule:.5 mm 2 to 2 x 2.5 mm 2 Rigid or flexible wire with ferrule:.5 mm 2 to 2 x 1.5 mm 2 15

5 CONTACT BLOCKS Faston connection Standards > Rated insulation voltage 32 V AC IEC/EN V AC UL 58 > NC contacts Positive opening IEC/EN > Rated impulse withstanding voltage Uimp 6 kv Pollution degree 3 > Conventional thermal current in free air conditions AC 15: 1 A IEC DC 13: 2.5 A > Electrical ratings Alternating current Direct current IEC AC15 - A 3 DC13 - Q 3 Ue = 12 V, Ie = 6 A Ue = 125 V, Ie =.55 A Ue = 24 V, Ie = 3 A Ue = 25 V, Ie =.27 A Minimum current of use Ue = 24 V DC and Ie = 5 ma Failure rate < 1-8 UL58 Alternating Current 5/6Hz - A3 Continuous Current - 1 amps Rated Voltage - 3Vac Direct Current - Q3 Continuous Current amps Rated Voltage - 3Vdc Max. Amps Max. Amps Max. Amps Max. Amps Voltage Make Break Voltage Make Break > Electrical operating life 1 million cycles for: - AC15 - B 3 - DC13 - R 3 Ue = 12 V, Ie = 3 A Ue = 125 V, Ie =.22 A Ue = 24 V, Ie = 1.5 A Ue = 25 V, Ie =.1 A > Faston size 6.35 mm (.25 ) or 2 x 2.8 mm (.11 ) 16

6 CONTACT BLOCKS Pin-style connection (for PCB) Standards > Rated insulation voltage 25 V AC IEC/EN V AC UL 58 > NC contacts Positive opening IEC/EN > Rated impulse withstanding voltage Uimp 4 kv Pollution degree 3 > Conventional thermal current in free air conditions AC 15: 5 A IEC DC 13: 1 A > Electrical ratings Alternating current Direct current IEC AC 15 - B 3 DC13 - R 3 Ue = 12 V, Ie = 3 A Ue = 125 V, Ie =.22 A IEC Ue = 24 V, Ie = 1.5 A Ue = 25 V, Ie =.1 A Minimum current of use - standard blocks - golden contacts Ue = 24 V DC and Ie = 5 ma Ue = 5 V DC and Ie = 1 ma Failure rate < 1-8 Failure rate < 1-8 UL58 Alternating Current 5/6Hz - B3 Continuous Current - 5 amps Rated Voltage - 3Vac Direct Current - R3 Continuous Current - 1 amp Rated Voltage - 3Vdc Max. Amps Max. Amps Max. Amps Max. Amps Voltage Make Break Voltage Make Break > Electrical operating life 1 million cycles for: - AC15 - B 3 - DC13 - R 3 Ue = 12 V, Ie = 3 A Ue = 125 V, Ie =.22 A Ue = 24 V, Ie = 1.5 A Ue = 25 V, Ie =.1 A > Pin diameter ø 1 mm 17

7 LED BLOCKS FOR ILLUMINATED HEADS Characteristics Standards > Rated insulation voltage 3 V IEC/EN > Rated impulse voltage Uimp 4 kv (with filter block see p. 7) IEC/EN Pollution degree 3 > Operating voltage 12 to 24 V AC/DC 48 V AC/DC (for LED block) 13 V AC 23 V AC > Frequency 5 or 6 Hz > Lifetime at rated supply voltage Red and yellow: 1 hours at 25 C Other colors: 5 hours at 25 C > Consumption of LED blocks Voltage: - 24 V: 25 ma ± 2% - 48 V: 15 ma ± 5% - 13 V: 2 ma ± 1% - 23 V: 16 ma ± 3% ONE PIECE PILOT LIGHT BA9S Characteristics > Rated insulation voltage 4 V IEC > Rated impulse withstand voltage Uimp 4 kv IEC/EN > Bulb rating 4 V max W max. IEC V max W max. UL 58 18

8 PANEL CUT-OUT DRILLING Ø For heads equipped with electrical blocks with screw or plug-in terminals Minimum interval (mm) = 3 With or without legend (usual case) = 33 IP 67 (silicon shroud) B A A B = 4 With large legend plate > 4 For mushroom head ø 4 > 45 For selector switch with long handle = 38 For super-flush button = 5 With 5 position clip = 45 With or without legend plate (usual case) = 54 With double touch = 77 With double touch + legend plate = 5 Joystick DRILLING FOR SUPER-FLUSH BUTTON Ø DRILLING WHEN USING THE ANTI-ROTATION RING (OPTIONAL) 3.2 Ø THICKNESS OF PANEL (E) E = 1 to 6 mm E 19

9 NON-ILLUMINATED Note: Dimension are to FRONT of Panel. Head with 1 contact block in a 1 position clip Head with 1 or 2 contact blocks in a 3 position clip Head with 3 contact blocks in a 3 position clip 5 Head with 4 or 5 contact blocks in a 5 position clip Note: blocks cannot be stacked when using the 5 position clip Head with 4, 5 or 6 contact blocks 2 nd level of contact blocks stacked directly on first row (3 position clip)

10 ILLUMINATED Note: Dimension are to FRONT of Panel. Pilot light in a 1 position clip Illuminated head with LED and 1 or 2 contact blocks in a 3 position clip Illuminated head with LED and 3 or 4 contact blocks 2 nd level of contact blocks stacked directly in first row (3 position clip) Illuminated head with LED on transformer supply with 1 or 2 contact blocks in a 3 position clip 5 Illuminated head with LED and 3 or 4 contact blocks in a 5 position clip Note: blocks cannot be stacked when using the 5 position clip Illuminated blocks 111

11 MECHANICAL OPERATION For 3 position selector switches Handle position (view from front of panel) Non operated block Operated block Contacts block actuation (clip position) MECHANICAL OPERATION For twin/triple touch switches Operator View (highlighted button is depressed) Non operated block Operated block Contacts block actuation (clip position) MECHANICAL OPERATION For Joysticks 2 position 4 position Two block clip (LME3 - standard with joystick head) LM11 in Terminal Position Clip Location Numbers A O B Two block clip (LME3 - standard with joystick head) LM11 in Terminal Position Clip Location Numbers A B O C D 3-4 X O O O O X 3-4 O O X X O O 3-4 O O O O X O O O X O 3-4 O X O O O X O O O O Four block clip (LME5) LM11 in Terminal Position Clip Location Numbers A O B Four block clip (LME5) LM11 in Terminal Position Clip Location Numbers A B O C D 3-4 X O O O O X 3-4 O O X X O O 3-4 X O O O O X 3-4 O O X X O O 3-4 O O O O X O O O X O 3-4 O X O O O X O O O O 3-4 O O O O X O O O X O 3-4 O X O O O X O O O O 112

12 DIAGRAMS PUSH-TO-TEST LED PILOT LIGHT DIAGRAMS Lamp-testing module with 1 diode (33ET) for direct supply 24 V and 48V Lamp-testing module with 2 diodes (33ETT) for direct supply 24 V and 48 V Lamp-testing assembly for direct supply 13 V and 24 V L1 Test L1 Test L1 Test Lamp testing module Y X1 Lamp testing module X1 Y X Lamp testing module Test + LED assembly Load LED block Load LED block Load LED block with test L2 L2 L2 PRINTED CIRCUIT BOARD MOUNTING PCB Board Drill Plan Ø PCB Terminal - single clip PCB Terminal - 3 position clip Ø 1 Ø