Pendant control stations 6

Size: px
Start display at page:

Download "Pendant control stations 6"

Transcription

1 Characteristics 6 For control circuits Environment Conformity to standards EN/IEC , CSA C22-2 n Product certifications XAC B Standard version: CSA 300 V type XAC M Standard version: CSA 300 V type Protective treatment XAC B Standard version: TH XAC M Standard version: TC, ( TH on request) Ambient air temperature For storage C For operation C Vibration resistance 15 gn ( Hz) conforming to IEC Shock resistance 100 gn conforming to IEC Electric shock protection XAC B Class II XAC M Class I conforming to IEC 610 Degree of protection IP 65 conforming to IEC 60529; IK 08 conforming to IEC Mechanical durability 1 (in millions of operating cycles) Enclosure XAC B Double insulated glass-reinforced polyester (colour: yellow) XAC M Aluminium enclosure. Painted yellow Cable entry Rubber sleeve with stepped entry diameter for cable Ø 7 mm, Ø mm or Ø mm Contact block characteristics Rated operational characteristics a AC-15: A300 or Ue = 0 V, le = 3 A c DC-: Q300 or Ue = 250 V, le = 0.27 A conforming to EN/IEC Appendix A Thermal current (lthe) A 10 Rated insulation voltage (Ui) XEN Cpppp, XEN D3ppp, V 500, degree of pollution 3, conforming to EN/IEC XEN Dppp, XES B20, XAC S, XES D81, XES D81 XEN Bpppp, XEN D1ppp, XEN D2ppp 00, degree of pollution 3, conforming to EN/IEC Rated impulse withstand voltage (U imp) kv 6, conforming to EN/IEC Positive operation Contact operation Mushroom head pushbutton: N/C contact with positive opening operation conforming to EN/IEC Appendix K Slow break or snap action Resistance across terminals MΩ y 25 Operating force With booted operator N XAC Sppp: 10 (N/O), 8 (N/C); XEN Cpppp: 6 (N/O), (N/C); XEN Bpppp, XEN D1ppp, XEN D2ppp: Single-speed: 9; 2-speed: 20 (1 st speed), 30 (2 nd speed); XEN D3ppp, XEN Dppp: 25; XES B20: 7; XES D81, XES D8: 15 (1 st speed), 25 (2 nd speed) With spring return mushroom head operator N 10 With latching mushroom head N 0 operator Terminal referencing By numbers conforming to EN 500 Short-circuit protection 10 A cartridge fuse type gg (gl) Connection mm 2 Screw and captive cable clamp terminals. Clamping capacity: 1 x 2.5 or 2 x 1.5 with or without cable end Operational power conforming to EN/IEC Appendix C Utilisation categories AC-15 and DC- For 1 million operating cycles Operating rate: 3600 operating cycles/hour Load factor: 0.5 o Inductive circuit Contact blocks XEN Cpppp, XEN D3ppp, XEN Dppp, XAC Sppp a.c. supply a 50/60 Hz d.c. supply c Voltage V Voltage V 8 0 o VA o W Contact blocks XEN Bpppp, XEN D1ppp, XEN D2ppp a.c. supply a 50/60 Hz d.c. supply c Voltage V Voltage V 8 0 o VA o W References: page 30076/3 Dimensions: page 30076/ Contact blocks XES B20, XES D81, XES D81 a.c. supply a 50/60 Hz d.c. supply c Voltage V Voltage V 8 0 o VA o W Application schemes: page 30076/ 2 version: EN.indd

2 References 6 For control circuits Complete stations ready for use (with snap action contact blocks) DF56556 DF For control of single-speed motors Functions Number of operators 2 without mechanical interlocking Contact blocks and scheme Reference Weight Per direction 1 C/O snap action XAC B XES B XAC B281 without mechanical interlocking 1 C/O snap action XES B XAC B DF XAC B81 6 without mechanical interlocking 1 C/O snap action XES B XAC B DF XAC B681 I 8 without mechanical interlocking 1 C/O snap action XES B XAC B O XAC B EN.indd version: 9.3 3

3 Characteristics 6 For power circuits (direct switching) Environment Conformity to standards EN/IEC EN/IEC , UL 508, CSA C22-2 n EN/IEC and EN/ISO 850 for versions with trigger action Emergency stop EN/IEC Product certifications Standard version CSA type Protective treatment Standard version TH Ambient air temperature For storage C For operation C Vibration resistance 15 gn ( Hz) conforming to IEC Shock resistance 100 gn conforming to IEC Electric shock protection Class II conforming to IEC 610 Degree of protection IP 65 conforming to IEC Mechanical durability (in millions of operating cycles) Enclosure Cable entry 1 except for XAC B91p and XAC CB92p: 0. Double insulated glass-reinforced polyester (colour: yellow) Rubber sleeve with stepped entry diameter for cable Ø 10 Ø 22 mm Contact block characteristics Thermal current (lthe) XES D91, XES D91 A XES D2201, XES D21, A 20 XES D2251 Rated insulation voltage (Ui) XES Dpppp V 500, degree of pollution 3, conforming to IEC XAC Sp99 V 00, degree of pollution 3, conforming to IEC XES D1ppp V 600, conforming to CSA XES D2ppp V 300, conforming to CSA Rated impulse withstand voltage (U imp) kv 6, conforming to IEC Contact operation Snap action Operating force XES D1ppp N 17 XES D2ppp N 32 Terminal referencing By numbers conforming to CENELEC EN Short-circuit protection XES D1ppp 10 A maximum cartridge fuse type am XES D2ppp A maximum cartridge fuse type am Connection mm 2 Captive screw clamp terminals Clamping capacity: 1 x 2.5 or 2 x 1.5 with or without cable end Operational power 3 phases, 2 poles Utilisation categories AC-3 and AC- conforming to EN/IEC Appendix A XES D1ppp 2.2 kw-0 V 2.2 kw-00 V Mechanical durability (in millions of operating cycles) Utilisation categories AC-3 and AC- conforming to EN/IEC Appendix A Duty cycle comprising 75% AC-3, 25% AC- Operating rate: 600 operating cycles per hour Load factor: 0. 3 phases, 3 poles XES D2ppp 3 phases, 3 poles, isolating block XAC Sp99 3 kw-0 V 3 kw-00 V Utilisation category AC-B 3 kw-00 V 3 phases, 2 poles CSA certifi cation XES D1ppp 2 hp-0 V 5 hp-00 V 3 hp-600 V 3 phases, 3 poles XES D2ppp 3 hp-0 V 3 phases, 2 poles XES D1ppp 1.5 kw-0 V = kw-0 V = kw-00 V = kw-00 V = phases, 3 poles XES D2ppp 3 kw-0 V = kw-00 V = 1 References: page 30076/5 Dimensions: page 30076/ Application schemes: page 30076/25 version: EN.indd

4 References 6 For power circuits (direct switching) Complete stations ready for use DF DF For control of single-speed motors Functions Number of operators 2 mechanically interlocked Contact blocks Per direction 2-pole XES D91(1) For Emergency stop Maximum operational power/00 V Reference Weight 2.2 kw XAC B XAC B219 XAC B220 XAC B3195 XAC B pole XES D2201(1) 3 kw XAC B DF DF mechanically interlocked + 1 trigger action latching Emergency stop Ø 0 mm operator ZA2 BS8 2-pole XES D91(1) 3-pole XES D2201(1) 1 N/C + N/C + N/C XAC S99 1 N/C + N/C + N/C XAC S kw XAC B3195 r kw XAC B3205 r mechanically interlocked between pairs 2-pole XES D91(1) 2.2 kw XAC B pole XES D2201(1) 3 kw XAC B DF XAC B91 XAC B93 XAC B916 XAC B936 mechanically interlocked between pairs + 1 trigger action latching Emergency stop Ø 0 mm operator ZA2 BS8 2-pole XES D91(1) 3-pole XES D2201(1) 1 N/C + N/C + N/C XAC S99 1 N/C + N/C + N/C XAC S kw XAC B916 r kw XAC B936 r mechanically interlocked between pairs + 1 trigger action latching Emergency stop Ø 0 mm operator ZA2 BS8 mounted in base 2-pole XES D91(1) 3-pole XES D2201(1) 1 N/C + N/C + N/C XAC S N/C + N/C + N/C XAC S kw XAC B915 r kw XAC B935 r 1.80 (1) Trigger action mechanically latching Emergency stop pushbuttons conform to standards EN/IEC , EN/ISO 850, Machinery directive 98/37/EC and standard EN/IEC XAC B915 XAC B935 r Available 3 rd quarter of EN.indd version: 9.3 5

5 References (continued) 6 For power circuits (direct switching) Complete stations ready for use DF For control of single-speed motors (continued) Functions Number of operators 6 mechanically interlocked between pairs Contact blocks Per direction 2-pole XES D91(1) For Emergency stop Maximum operational power/00 V Reference Weight 2.2 kw XAC B pole XES D2201(1) 3 kw XAC B mechanically interlocked between pairs + 1 trigger action latching Emergency stop Ø 0 mm operator ZA2 BS8 2-pole XES D91(1) 3-pole XES D2201(1) 1 N/C + N/C + N/C XAC S99 1 N/C + N/C + N/C XAC S kw XAC B6916 r kw XAC B6936 r DF56557 XAC B691 XAC B693 DF mechanically interlocked between pairs + 1 trigger action latching Emergency stop Ø 0 mm operator ZA2 BS8 mounted in base 2-pole XES D91(1) 3-pole XES D2201(1) For control of 2-speed motors Functions Number of operators 2 mechanically interlocked Contact blocks Per direction 2-pole XES D91(1) 1 N/C + N/C + N/C XAC S N/C + N/C + N/C XAC S3991 For Emergency stop 2.2 kw XAC B6915 r kw XAC B6935 r Maximum operational power/00 V Reference Weight 2.2 kw XAC B DF XAC B6916 XAC B6936 DF XAC B6915 XAC B mechanically interlocked + 1 trigger action latching Emergency stop Ø 0 mm operator ZA2 BS8 2-pole XES D91(1) 1 N/C + N/C + N/C XAC S kw XAC B3295 r (1) Trigger action mechanically latching Emergency stop pushbuttons conform to standards EN/IEC , EN/ISO 850, Machinery directive 98/37/EC and standard EN/IEC XAC B229 XAC B3295 r Available 3 rd quarter of 20 Characteristics: page 30076/ Dimensions: page 30076/ Application schemes: page 30076/25 6 version: EN.indd

6 References 6 Empty enclosures DF DF Empty enclosures for control circuits or power circuits (1) Description Protective cable sleeve Empty enclosures (1) For cable Double insulated for Ø 7 mm Small hoist applications Operator cut-out centres: 0 mm Number of cut-outs Cut-out in base of enclosure Reference Weight 2 Without XAC B Without XAC B XAC B020 XAC B030 DF DF Empty enclosures (1) Double insulated for General purpose applications Operator cut-out centres: 0 mm For cable Ø mm 2 Without XAC B With XAC B Without XAC B XAC B02p XAC B0p With XAC B DF DF Without XAC B With XAC B Without XAC B XAC B06p With XAC B DF56558 in 2 rows of 6 Without XAC B 1.60 XAC B08p With XAC B (1) Enclosure comprising: - the enclosure, - protective cable sleeve, - cable tie (for tightening sleeve onto cable), - internal cable clamp, - suspension ring, - bezel tightening key. XAC Bp EN.indd version: 9.3 7

7 References (continued) 6 Empty enclosures DF DF Empty enclosures for control circuits or power circuits (1) (continued) Description Empty enclosures (1) Double insulated for General purpose applications Operator cut-out centres: 0 mm Protective cable sleeve For cable Ø mm Number of cut-outs Cut-out in base of enclosure Reference Weight 2 Without XAC B With XAC B Without XAC B XAC B02pp XAC B0pp With XAC B DF DF Without XAC B With XAC B Without XAC B XAC B06pp With XAC B DF56558 in 2 rows of 6 Without XAC B XAC B08pp With XAC B (1) Enclosure comprising: - the enclosure, - protective cable sleeve, - cable tie (for tightening sleeve onto cable), - internal cable clamp, - suspension ring, - bezel tightening key. XAC Bpp Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 8 version: EN.indd

8 References 6 For control circuits Empty enclosures (XAC M: products for maintenance purposes only) DF Empty enclosures for control circuits (1) Description Empty enclosures (1) Double insulated for General purpose applications Operator cut-out centres: 30 mm Protective cable sleeve For cable Ø mm Number of cut-outs Cut-out in base of enclosure Reference Weight in 1 row Without XAC B0 1.0 With XAC B For cable Ø mm in 1 row Without XAC B With XAC B XAC B0 Empty enclosures (1) Metal for General purpose applications Operator cut-out centres: 0 mm For cable Ø mm Without XAC M With XAC M DF Without XAC M DF With XAC M For cable Ø mm Without XAC M With XAC M Without XAC M XAC M0p XAC M08p With XAC M Variable composition stations, factory assembled Use the order form on page EN/27 to defi ne the required confi guration Equipment: contact blocks, operating heads (control and signalling), complementary accessories See separate components, pages 30076/10 to 30076/22 (1) Enclosure comprising: - the enclosure, - protective cable sleeve for cable Ø mm or Ø mm, - cable tie (for tightening sleeve onto cable), - internal cable clamp, - suspension ring, - bezel tightening key EN.indd version: 9.3 9

9 References 6 For control circuits Separate components and spare parts DF Contact blocks for front mounting, slow break Description Application Function Scheme Operator centres Spring return Single block 1 spring return operator mm Reference Weight Single-speed N/O 30 or 0 XEN C XEN C N/C 30 or 0 XEN C N/O + N/O 30 or 0 XEN C N/C + N/C 30 or 0 XEN C N/C + N/O 30 or 0 XEN C DF C/O + N/O 30 or 0 XEN B XEN B81 2-speed 2 step N/O + N/O staggered 3 30 or 0 XEN B step C/O + N/O staggered or 0 XEN B DF Double block 2 spring return operators mechanically interlocked Single-speed N/O + N/O simultaneous 30 XEN D (1) XEN D XEN D26 2-speed 2 step N/O + N/O staggered 30 XEN D (1) XEN D (1) These contact blocks cannot be mounted in enclosures XAC B0p ( operators in 1 row). Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 10 version: EN.indd

10 References (continued) 6 For control circuits Separate components and spare parts DF Contact blocks for front mounting, slow break (continued) Description Application Function Scheme Operator Reference Weight centres mm Spring return (continued) Double block 2 spring return operators mechanically interlocked Single-speed C/O + N/O 30 XEN D (1) XEN D XEN D261 2-speed 2 step C/O + N/O staggered XEN D DF (1) XEN D Latching Double block 1 latching operator released by 1 spring return operator Single-speed N/C + N/O 30 XEN D XEN D (1) XEN D Double block 2 latching operators Single-speed N/C + N/O 30 XEN D DF (1) XEN D XES B20 Contact blocks for front mounting, snap action Description Application Function Scheme Operator centres Spring return Single block 1 spring return operator (2) mm Reference Weight Single-speed C/O 0 (1) XES B DF56559 Double block 2 spring return operators mechanically interlocked Single-speed C/O 0 (1) XES D XES D81 2-speed C/O + N/O staggered 3 0 (1) XES D (1) These contact blocks cannot be mounted in enclosures XAC B0p ( operators in 1 row). (2) Only for mounting with operators XAC B91pp EN.indd version: 9.3

11 References (continued) 6 For control circuits Separate components and spare parts 5300 Contact blocks for front mounting (1) Description Function Scheme Reference Weight Spring return Slow break Operator centres 30 or 0 mm N/O XAC S XAC S1p N/C XAC S N/O + N/O XAC S N/C + N/C XAC S N/C + N/O XAC S Contact blocks for base mounting (1) Description Function Scheme Reference Weight Spring return Slow break N/O XAC S N/C XAC S XAC S1 N/O + N/O XAC S N/C + N/C XAC S N/C + N/O XAC S DF Pilot light bodies for front mounting Description Supply voltage Scheme Reference Weight Direct supply Bulb not included (2) y 00 V X1 XAC V X2 XAC V06 Direct supply, through resistor Incandescent BA 9s base fi tting 0 V bulb included 0 V X1 XAC V X2 (1) Mounting with operating heads ZA2 Bppp (see page 30076/15). (2) Bulb type for use with direct supply units: BA 9s base fi tting incandescent bulb U y 0 V or neon bulb 0 V y U y 00 V. Maximum power: 2.6 W, maximum Ø: mm, maximum length: 26 mm. See page 30076/18. Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 version: EN.indd

12 References 6 For power circuits (direct switching) Separate components and spare parts DF56559 Contact blocks, snap action Description Application Function Max. power/ Scheme Reference Weight 00 V Double block 2-pole 2 spring return operators mechanically interlocked (operator centres: 0 mm) Singlespeed N/O + N/O 2.2 kw XES D XES D91 2-speed N/O + N/O + 1 C/O staggered auxiliary contact (1) 2.2 kw XES D Double block Singlespeed 3-pole 2 spring return operators mechanically interlocked (operator centres: 0 mm) N/O + N/O + N/O 3 kw XES D XES D2201 N/O + N/O 3 kw XES D N/O + 1 N/O simultaneous auxiliary contact (1) N/O + N/O 3 kw XEN D N/O + 1 N/O staggered auxiliary contact (1) XAC S399 Isolating block, slow break In the interests of safety, it is imperative that these isolating blocks only be used with a stay put or latching type operating head to ensure complete isolation when the pendant station is not in use. Mounting position Application Function Max. power/ 00 V On front 0 mm centres (2) Emergency stop N/C + N/C + N/C with positive opening operation Scheme Reference Weight 3 kw XAC S XAC S99 On front 30 mm centres (2) In base (3) Emergency stop Emergency stop N/C + N/C + N/C with positive opening operation N/C + N/C + N/C with positive opening operation 3 kw XAC S kw XAC S XAC S3991 (1) Auxiliary contacts are slow break. (2) Mounting with operating heads ZA2 Bppp, except ZA2 BDp and ZA2 BGp (see page 30076/15). (3) Mounting with operating head ZA2 BS9 (see page 30076/15) EN.indd version: 9.3

13 References 6 Separate components and spare parts DF XAC B9p Booted operators For use with contact block XEN Bpppp XEN Cpppp XEN Dpppp XES B20 XES D2201 XES D21 XES D2251 Travel Operating temperature mm C (1) Colour of insert Sold in lots of Unit reference Weight White 10 XAC B Black 10 XAC B Green 10 XAC B Red 10 XAC B Yellow 10 XAC B Blue 10 XAC B Brown 10 XAC B C (2) White 10 XAC B Black 10 XAC B Green 10 XAC B Red 10 XAC B Yellow 10 XAC B Blue 10 XAC B Brown 10 XAC B DF XES D81 XES D91 XES D81 XES D91 16 mm C (1) White 10 XAC B Black 10 XAC B Green 10 XAC B Red 10 XAC B XAC B921p Yellow 10 XAC B Blue 10 XAC B Brown 10 XAC B C (2) White 10 XAC B Black 10 XAC B Green 10 XAC B Red 10 XAC B Yellow 10 XAC B Blue 10 XAC B DF Booted operators (silicone boot) For use with contact block Operating temperature Brown 10 XAC B Colour of boot Reference Weight XAC S1p C Black ZA2 BP Green ZA2 BP ZA2 BPp Red ZA2 BP Yellow ZA2 BP Blue ZA2 BP (1) Polychloroprene boots. (2) Silicone boots. Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 version: EN.indd

14 References 6 Separate components and spare parts DF53893 DF ZA2 BS8 ZA2 BS9 ZA2 BDp ZA2 BGp ZA2 BBp ZA2 BV0p Operating heads for front or base mounting (1) Description Colour Type Reference Weight Trigger action latching Emergency stop (2) Turn to release (Emergency stop function) Trigger action latching Emergency stop (2) (3) Key release (n 55) Key withdrawal in rest (unactuated) position (Emergency stop function) Selector switches, standard handle () Key switches (key n 55) (3) Key withdrawal in left and right-hand positions Key switches (key n 55) (3) Key withdrawal in left-hand position Red Ø 30 mm ZA2 BS Ø 0 mm ZA2 BS8 0.0 Red Ø 30 mm ZA2 BS Ø 0 mm ZA2 BS Black 2 position, stay put ZA2 BD position, stay put (5) ZA2 BD position, stay put ZA2 BG position, stay put (5) ZA2 BG position, stay put ZA2 BG Key switches 2 position ZA2 BG (key n 55) (3) Spring return from right to left Key withdrawal in left-hand position Key switches (key n 55) () (3) Key withdrawal in centre position 3 position, stay put (5) ZA2 BG Wobblesticks (6) Operates in all directions for fast stop Black ZA2 BB Red ZA2 BB Operating head for isolating block Description Colour Type Reference Weight Mushroom head, latching Key release (n 55) Key withdrawal in rest (unactuated) position (Emergency stop function) Red Ø 0 mm ZA2 BS Pilot light heads Description Colour Reference Weight For use with incandescent bulbs Lens cap with fi xing bezel White ZA2 BV Green ZA2 BV Red ZA2 BV Yellow ZA2 BV Blue ZA2 BV Clear ZA2 BV For use with neon bulbs Lens cap with fi xing bezel Green ZA2 BV Red ZA2 BV Yellow ZA2 BV Clear ZA2 BV (1) The technical characteristics of pendant control stations XAC B and XAC M can only be guaranteed by using the operating heads ZA2 Bpp listed above. (2) Trigger action mechanically latching Emergency stop pushbuttons conform to standards EN/IEC , EN/ISO 850, Machinery directive 98/37/EC and standard EN/IEC (3) Other key numbers available on request, please consult your Customer Care Centre. () Selector switches or key switches with other mechanical functions: please consult your Customer Care Centre. (5) Only suitable for front mounting. (6) Base mounting recommended EN.indd version:

15 Characteristics 6 For control circuits Separate components: pushbuttons with analogue output (1) Environment Conformity to standards EN/IEC Ambient air temperature For storage C For operation C Degree of protection IP 65 conforming to IEC Pushbutton operator travel mm Operating force N (start of travel) 9 (end of travel) Mechanical durability 1 (in millions of operating cycles) Connection mm 2 Terminal connectors, maximum clamping capacity: 2 x 1.5 mm 2 or 1 x 2.5 mm 2 Contact block characteristics Thermal current (lthe) A 6 Rated insulation voltage (Ui) V 250, degree of pollution 3, conforming to IEC Rated operational characteristics conforming to Appendix C Utilisation categories AC-15 and DC- a.c. supply a 50/60 Hz Power broken in VA for 1 million operating cycles d.c. supply c Power broken in W for 1 million operating cycles o Inductive circuit Voltage V Voltage V 8 0 o VA o W 8 Analogue circuit characteristics Type of current d.c. Rated supply voltage V 15 Voltage limits V 18 Current consumption ma < 15 Analogue signal output curves and schemes Analogue signal output curves Equivalent output schemes with 15 V supply voltage XEA p15361 XEA p Travel on pushbutton operator (mm) 1 kω 0 10 V 15 V S 10 kω 0 10 V 1 kω 0 V S 10 kω XEA XEA V V - 10 V V Note: supply voltage = 15 V, output voltage = 10 V (if supply voltage < 15 V, output voltage < 10 V) Contact state 0,5 mm , mm,5 mm contact closed contact open (1) Pushbuttons providing an analogue output signal proportional to the distance travelled by the pushbutton operator. References: page 30076/17 Dimensions: page 30076/17 16 version: EN.indd

16 References, dimensions 6 For control circuits Separate components: pushbuttons with analogue output (1) References Complete pushbuttons (body + operating head), non booted (2) Supply voltage Contact block Reference Weight 0-15 V N/C + N/O at start of travel N/O at end of travel XEA C XEA Cp V N/C + N/O at start of travel N/O at end of travel XEA C Complete pushbuttons (body + operating head), booted (2) Supply voltage Contact block Reference Weight 0-15 V N/C + N/O at start of travel N/O at end of travel XEA B V N/C + N/O at start of travel N/O at end of travel XEA B XEA Bp5361 Mounting accessories Description For use with Reference Weight Tightening key for fi xing nut XEA Cp5361 ZA2 BZ ZA2 BZ905 XEA Bp5361 XAC X XAC X1 Separate components and spare parts Description Colour of insert Unit reference Weight Booted operator (Sold in lots of 10) White XAC B Black XAC B DF (1) Pushbuttons providing an analogue output signal proportional to the distance travelled by the pushbutton operator. (2) Pushbutton supplied with 1 white insert and 1 black insert. XAC B92 Dimensions XEA Bp5361 XEA Cp5361 Panel cut-out Ø22,3 +0, 0 30 (1) E 17 E 18 = = = = E = support panel thickness, 1 to 3.5 mm. (1) Minimum fi xing centres between 2 operators EN.indd version:

17 References 6 Separate components and spare parts DL1 Cpppp Bulbs Description Voltage Sold in lots of Incandescent BA 9s base fi tting Maximum power: 2.6 W Maximum Ø: mm Maximum length: 28 mm Unit reference Weight 6 V 10 DL1 CB V 10 DL1 CE V 10 DL1 CE V 10 DL1 CE V 10 DL1 CE DL1 CFppp Neon BA 9s base fi tting Maximum power: 2.6 W Maximum Ø: mm Maximum length: 28 mm 0 V 10 DL1 CF V 10 DL1 CF V 10 DL1 CF Accessories for booted operators Description Travel Material/ Colour Boots with circlip, without coloured insert Operating temperature Sold in lots of Unit reference Weight mm Polychloroprene C 10 XAC B Silicone C 10 XAC B mm Polychloroprene C 10 XAC B XAC B91p Silicone C 10 XAC B Coloured inserts for booted operators ( and 16 mm travel) White 10 XAC B Black 10 XAC B Green 10 XAC B XAC B92p Red 10 XAC B Yellow 10 XAC B Blue 10 XAC B XAC B90p Brown 10 XAC B Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 18 version: EN.indd

18 References (continued) 6 Separate components and spare parts Complementary accessories Description For use with Reference Weight Protective cable sleeve with cable tie (for tightening sleeve onto cable) Enclosures XAC B219 and XAC B220 (2 operators) For cable Ø 7 mm XAC B XAC B9 Enclosures XAC Bppp with to operators and XAC Mppp with and 8 operators For cable Ø mm XAC B For cable Ø mm XAC B Blanking plug with seal and fi xing nut ZB2 SZ XAC B960 Adaptor for use with protective cable sleeve for cable Ø mm Self-supporting cable type BBAP XAC B Lower support ring Single row enclosures XAC B and XAC M XAC B XAC B971 2 row enclosures XAC B XAC B DF Protective guards for base mounted units Emergency stop pushbutton XAC B DF56560 XAC B972 Tools Description For use with Reference Weight Tightening key Bezels XAC X Units mounted in base of enclosure XAC X XAC B Bulb extractor BA 9s base fi tting bulbs XBF X XAC X1 XAC X EN.indd version:

19 References 6 Legends 30 x 0 mm (with symbols conforming to NF E 52-1) DF Symbol Reference Symbol Reference Weight Symbol Reference Symbol Reference Weight Vertical mounting 0 mm centres Horizontal mounting 30 mm centres Vertical mounting 0 mm centres Horizontal mounting 30 mm centres Raise, slow Lower, slow ZB2 BY951 ZB2 BY ZB2 BY295 ZB2 BY Raise, fast Lower, fast ZB2 BY952 ZB2 BY ZB2 BY2955 ZB2 BY Raise, slow-fast Lower, slow-fast ZB2 BY953 ZB2 BY ZB2 BY2956 ZB2 BY Right, slow Left, slow ZB2 BY901 ZB2 BY ZB2 BY290 ZB2 BY Right, fast Left, fast ZB2 BY902 ZB2 BY ZB2 BY2905 ZB2 BY Vertical mounting 0 mm centres Horizontal mounting Right, slow-fast Left, slow-fast 30 mm centres ZB2 BY903 ZB2 BY ZB2 BY2906 ZB2 BY DF Forward, slow Reverse, slow ZB2 BY963 ZB2 BY ZB2 BY2966 ZB2 BY White bacround, black symbol Forward, fast Reverse, fast ZB2 BY96 ZB2 BY ZB2 BY2967 ZB2 BY Forward, slow-fast Reverse, slow-fast ZB2 BY965 ZB2 BY ZB2 BY2968 ZB2 BY Black bacround, white symbol Slew right, slow Slew left, slow ZB2 BY919 ZB2 BY ZB2 BY2922 ZB2 BY Red bacround, white symbol Slew right, fast Slew left, fast ZB2 BY920 ZB2 BY ZB2 BY29 ZB2 BY Slew right, slow-fast Slew left, slow-fast ZB2 BY921 ZB2 BY ZB2 BY29 ZB2 BY Slow Fast ZB2 BY9 ZB2 BY ZB2 BY93 ZB2 BY Klaxon Start-Klaxon ZB2 BY982 ZB2 BY ZB2 BY985 ZB2 BY Start Stop ZB2 BY980 ZB2 BY ZB2 BY2931 ZB2 BY Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 20 version: EN.indd

20 References 6 Legends 30 x 0 mm DF White Black Red Text Reference Weight b Start functions: white characters on black bacround b Stop functions: white characters on red bacround Text Reference Weight ZB2 BY2101 Blank Black or red bacround ZB2 BY White or yellow bacround ZB2 BY DF Black White Yellow With French text With English text For pushbuttons For pushbuttons Marche ZB2 BY Start ZB2 BY Arrêt ZB2 BY Stop ZB2 BY Avant ZB2 BY Forward ZB2 BY Arrière ZB2 BY Reverse ZB2 BY ZB2 BY101 Montée ZB2 BY Up ZB2 BY Descente ZB2 BY Down ZB2 BY Droite ZB2 BY Right ZB2 BY Gauche ZB2 BY Left ZB2 BY En service ZB2 BY On ZB2 BY Hors service ZB2 BY Off ZB2 BY Sous tension ZB2 BY Power on ZB2 BY Lent ZB2 BY Slow ZB2 BY Vite ZB2 BY Fast ZB2 BY Klaxon ZB2 BY For selector switches For selector switches Arrêt-Marche ZB2 BY Hors-En ZB2 BY Off-On ZB2 BY With special texts b Specify text when ordering, b 2 lines maximum, characters per line. White characters on black bacround White characters on red bacround Other versions ZB2 BY Black characters on white bacround ZB2 BY Black characters on yellow bacround Legends with texts in other languages. Please consult your Customer Care Centre. ZB2 BY ZB2 BY EN.indd version:

21 References 6 Twin legends for tower cranes Legends with white symbols on black bacround Function Symbol Reference Weight Function Symbol Reference Weight 0 mm operator centres (for enclosures with 2 to 8 operators and operators in 2 rows) Hoist Raise Lower XAC Y Long travel Forward Reverse XAC Y Slew Right Left XAC Y Trolley Forward Reverse XAC Y mm operator centres (for enclosures with operators in 1 row) Hoist Raise Lower XAC Y Long travel Forward Reverse XAC Y Slew Right Left XAC Y Trolley Forward Reverse XAC Y Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 22 version: EN.indd

22 Dimensions 6 (XAC M: products for maintenance purposes only) Pendant control stations XAC Bppp (2 and 3-way) XAC Bppp (2 to -way, 1 row) XAC Mppp ( to 8-way, 1 row) XAC Bppp (-way, 2 rows) ,5 85 b1 b1 d b d b (1) c (1) c Protective cable sleeves internal Ø Ø7 Ø9 Ø Ø internal Ø Ø10 Ø 16 Ø16 19 Ø19 22 internal Ø Ø22 26 Ø26 29 Ø29 32 Ø32 35 (1) With mushroom head operator. Number of operators (1 row) (2 rows) b b c d Protective guards XAC B982 Lower support rings XAC B971, B EN.indd version: 9.3

23 Application schemes (typical examples) 6 Control circuits For control of single-speed reversing motor Contact block XES D81 For control of 2-speed reversing motor Contact block XES D81 S1 A S KM2 A1 KM1 A2 A2 21 S1 A1 S2 KM1 A1 A1 KM A1 KM2 A2 A2 Power circuits For control of single-speed reversing motor. 2-phase switching Contact block XES D91 KM: high speed contactor Application example: Combined with 3-pole isolating block XAC S399 or XAC S3991, shown in the unoperated position (pendant station supplied ), fi tted with key release trigger action latching Emergency stop operator (ZA2 BS9). L1 L2 L3 S1 S2 U L1 L2 L3 3 V W Q S1 S2 U V 3 W Characteristics: pages 30076/2 and 30076/ Dimensions: page 30076/ Application schemes: page 30076/ Presentation: page 30076/26 version: EN.indd

24 Application schemes (typical examples) (continued) 6 Power circuits (continued) For control of 2-speed reversing motor (motors with separate windings only). 2-phase switching Contact block XES D91 Application example: Combined with 3-pole isolating block XAC S399 or XAC S3991, shown in the unoperated position (pendant station supplied ), fi tted with key release trigger action latching Emergency stop operator (ZA2 BS9). L1 L2 L3 S Q S L1 L2 L3 S S Y Y U1 U2 U1 U2 V1 V2 V1 V2 W1 W2 W1 W2 For control of single-speed reversing motor. 3-phase switching, reversing by 2-phase inversion Contact block XES D2201 Contact block XES D21 with line contactor L1 L2 L3 1 F1 2 L1 L2 L S1 S2 U V W 5 A A KM1 2 6 S1 S2 U V W 8 Y Y EN.indd version:

25 Presentation 6 XEA B p5361 XEN C XEN D26 XEA Cp 5361 XAC B9p XES B20 XES D1pp 1 XAC B921p ZA2 BS83 XEN D3801 ZB2 BYpppp ZA2 BS9 XEN B81 ZB2 BY pppp ZA2 BS8 XAC S99 XES D22p 1 ZA2 BS93 ZB2 BYpppp XAC S399 ZA2 BDp XAC S1p ZA2 BGp XAC V0 p XAC S1p1 XAC B982 ZA2 BBp XAC S3991 ZA2 BV0 p ZA2 BS8 ZA2 BS9 ZB2 SZ3 26 version: EN.indd

26 Order form (specimen suitable for photocopying) 6 (XAC M: products for maintenance purposes only) Variable composition stations, factory assembled 5303 Customer Schneider Electric Industries Company Order N Delivery date Sales offi ce - Subsidiary Co. Order N Enter the order with XAC B09 reference (for enclosures XAC B) or XAC M09 reference (for enclosures XAC M) cut-outs, centres: 0 mm 16 1 Unit reference of empty enclosure see page 30076/7 XAC Legends see page 30076/20 Contact blocks or pilot light bodies see page 30076/10 Number of identical stations Enclosure price (1) Operating heads or pilot light heads or blanking plug see page 30076/15 Reference Unit price Reference Unit price Reference Unit price Total price to 8 cut-outs, centres: 0 mm Unit mounted in base of enclosure (if required) Factory assembled: Number of heads or blanking plugs to be fi tted X Additional cost XAC 9VA for fi tting of 1 head or 1 blanking plug cut-outs, centres: 30 mm 15 Complementary accessories, see page 30076/19 (cross the appropriate box or boxes) Description Reference Unit price Adaptor for self-supporting cable type BBAP for XAC B961 use with cable entry sleeve Ø 10 to 22 mm 15 Lower support ring for single row enclosures XAC B Lower support ring for 2 row enclosures XAC B Protective guard for key release latching mushroom head pushbutton, mounted in base Total price of assembled pendant station (1) Obtain the empty enclosure price. XAC B EN.indd version:

Pendant control stations 6

Pendant control stations 6 Characteristics Pendant control stations For control circuits Environment Conformity to standards EN/IEC 0--, CSA C- n Product certiþ cations XAC B Standard version: CSA 00 V type XAC M Standard version:

More information

Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M

Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard

More information

Pendant control stations 6

Pendant control stations 6 Characteristics 6 Environment Conformity to standards IEC 97-5-1, EN 6097-5-1 Product certifications NEMKO. Special version: UL Listed A600-Q600, CSA A600-Q600 Protective treatment Standard version TH

More information

Control stations and enclosures 0

Control stations and enclosures 0 Characteristics Environment Conformity to standards IEC 947-5-1, EN 60 947-5-1, IEC 337-1, NF C 63-0, VDE 0660-200 Product certifications Standard version DEMK, NEMK, SÄHKÖTARKASTUSKESKUS, ASE Specia version

More information

and signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights

and signalling units Ø 22 1 Harmony XB7 Monolithic pushbuttons, switches and pilot lights Characteristics 1 Environment Protective treatment Standard version TH Ambient air temperature Storage C - 40 + 70 around the device Operation C - 25 + 70 for LED and neon bulb versions - 25 + 40 for incandescent

More information

Components for safety applications

Components for safety applications Metal, turret head, types CS-A, CS-C and CS-E Double insulated, turret head, types CS-PA, CS-TA and CS-TE Presentation Metal, types CS-A, CS-C, CS-E Switches with or without locking of the actuator Pages

More information

TeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X

TeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00

More information

Characteristics 5 TeSys k contactors and reversing contactors

Characteristics 5 TeSys k contactors and reversing contactors 90 Characteristics contactors k contactors and reversing contactors Environment characteristics Conforming to standards IEC 60947, NF C 63-110, VDE 0660, BS 424 Product certifications LCp and LPp K06 to

More information

Modular equipment. Presentation, standards. Standard contactors TeSys GC

Modular equipment. Presentation, standards. Standard contactors TeSys GC Presentation, standards Standard contactors TeSys GC Presentation TeSys GC contactors are designed for use in modular panels and enclosures. These contactors feature: b Easy installation v quick clip-on

More information

LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC

LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category

More information

LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A - 24 V DC coil

LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A - 24 V DC coil Product data sheet Characteristics LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Electromechanical pressure and vacuum switches 0

Electromechanical pressure and vacuum switches 0 30350-EN_Ver6..fm/ Presentation Electromechanical and vacuum switches 0 Nautilus For control circuits, type XML Pressure and vacuum switches type XML are switches for control circuits. They are used to

More information

LC2D09BD. Main. Device short name. Utilisation category. Poles description Pole contact composition

LC2D09BD. Main. Device short name. Utilisation category. Poles description Pole contact composition Product datasheet Characteristics Main Range Product name Product or component type Device short name Contactor application Utilisation category Device presentation Poles description Pole contact composition

More information

Complete units: Push-buttons ø 22mm

Complete units: Push-buttons ø 22mm Complete units: Push-buttons ø 22mm FLUSH SPRING RETURN - NON-ILLUMINATED Chrome Bezel Part Number Technical Info (p. 103) Black Bezel Part Number 11 Ø 29.9 20.1 19.6 With single position clip Red NC L21AA01-1E01

More information

Complete units: Mushroom heads ø 22mm

Complete units: Mushroom heads ø 22mm Complete units: Mushroom heads ø 22mm MAINTAINED - NON-ILLUMINATED Ø 40 MUSHROOM Push-pull to reset Technical Info (p. 103) Black Bezel Part Number 34.2 Ø 40 Red NC L22DD01-3E01 Red 2 NC L22DD01-3E02 Red

More information

LC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil

LC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil Product data sheet Characteristics LC1D12BD TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Control Stations ø 22

Control Stations ø 22 Control Stations ø 22 CONTROL STATIONS - NON-ILLUMINATED Technical Info (p. 103) MUSHROOM HEAD Ø 40 - MAINTAINED Push-turn to reset Part Number M16/20 47.9 25.7 Ø 40 Red NC EMERGENCY STOP LBX10510 Red

More information

3 - Protection components Circuit-breakers

3 - Protection components Circuit-breakers Contents - Protection components Circuit-breakers for the motor protection Selection guide..............................................page /2 Thermal-magnetic motor circuit-breakers Selection guide..............................................page

More information

LC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 48 V DC coil

LC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 48 V DC coil Product data sheet Characteristics LC1D32ED TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Operator Heads: ø 22mm

Operator Heads: ø 22mm Operator Heads: ø 22mm SPRING RETURN - NON-ILLUMINATED Technical Info (p. 103) FLUSH-FLUSH Twin touch Chrome Bezel Part Number Black Bezel Part Number 12.3 11 53.9 29.9 With International Symbols Green

More information

Complete units: Selector switches ø 22mm

Complete units: Selector switches ø 22mm Complete units: Selector switches ø 22mm SELECTOR SWITCHES - NON-ILLUMINATED Technical Info (p. 13) WITH KNOB 2 and 3 positions Chrome Bezel Part Number Black Bezel Part Number Ø 29.9 Maintained positions

More information

Operator Heads: ø 22mm

Operator Heads: ø 22mm Operator Heads: ø 22mm ONE-PIECE PILOT LIGHTS Technical Info (p. 103) SUPPLIED WITHOUT BULB Part Number L20SA40 14.3 44.1 Ø 29.8 Ø 20.2 Ø 22 Ø 29.5 1 to 6 6 Ribbed Lens Clear Smooth Lens With text or symbol

More information

RXG21BD interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB

RXG21BD interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB Characteristics interface plug-in relay - Zelio RXG - 2 C/O standard - 24V DC - 5A - with LTB Main Range of product Series name Product or component type Device short name Contacts type and composition

More information

Separate units: Blocks

Separate units: Blocks Separate units: Blocks LED BLOCKS Technical Info (p. 103) SCREW TERMINALS Part Number 3.8 LED 19.7 20.1 X1 X2 33EARL 9.9 19.7 21.5 18.2 12/24 V White Red Green Blue Yellow 33EAWL 33EARL 33EAGL 33EABL 33EAYL

More information

Safety switches with slotted hole lever

Safety switches with slotted hole lever Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the

More information

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009 Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred

More information

FM series position switches

FM series position switches FM series position switches Selection diagram 0 08 0 A A 0 A 0 External rubber gasket External rubber gasket External rubber gasket External rubber gasket 0 69 Round rod, stainless steel Square rod Glass

More information

Local control stations for Zone 1 and Zone 21. Features. Description

Local control stations for Zone 1 and Zone 21. Features. Description Local control stations for Zone and Zone Local control stations for Zone and Zone Features The right size/material enclosure Optimum functionality thanks to the great variety of components Customised planning

More information

Motor starters. TeSys E. Designed for the essential

Motor starters. TeSys E. Designed for the essential Motor starters TeSys E Designed for the essential Designed for the essential Contents TeSys E contactors, 6 A to 300 A TeSys E thermal overload relays 0.1 A to 333 A TeSys E control relays 4 NO/NC contacts

More information

Position switches FM series

Position switches FM series B Position switches FM series Selection diagram 0 08 0 A A 0 A 0 external rubber gasket external rubber gasket external rubber gasket external rubber gasket 69 stainless steel round rod square rod fiber

More information

LR Position Switches TECHNICAL DATASHEET

LR Position Switches TECHNICAL DATASHEET TECHNICA DATASHEET Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 69 contact blocks available actuators available M assembled connector versions Silver

More information

ATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW

ATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW Characteristics soft starter for asynchronous motor - ATS01-25 A - 110..480V - 2.2..11 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device

More information

ATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW

ATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW Characteristics soft starter for asynchronous motor - ATS01-12 A - 110..480V - 1.5..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application

More information

Charlie. Pendant control station. Industrial lifting. Construction lifting. Stage technology. Industrial automation

Charlie. Pendant control station. Industrial lifting. Construction lifting. Stage technology. Industrial automation Charlie Pendant control station Charlie pendant station is a control device for all industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as

More information

ATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW

ATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW Characteristics soft starter for asynchronous motor - ATS01-3 A - 110..480V - 0.55..1.1 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application

More information

Industrial Controls. Catalog IC SIRIUS. Answers for industry.

Industrial Controls. Catalog IC SIRIUS. Answers for industry. Industrial Controls Catalog IC 10 2012 SIRIUS Answers for industry. Contactor Relays Siemens AG 2012 Overview Standards IEC 60947-1, EN 60947-1, IEC 60947--1, EN 60947--1 The 3TH42 and 3TH43 contactor

More information

Controls Contactors and Contactor Assemblies Special Applications

Controls Contactors and Contactor Assemblies Special Applications Controls Contactors and Contactor Assemblies Special Applications Price groups 1B, 1H /2 Introduction More information can be found on the Internet: see the opening information, page 13 - Contactors for

More information

RE7RL13BU off-delay timing relay with control contact s - 24 V AC DC - 2OC

RE7RL13BU off-delay timing relay with control contact s - 24 V AC DC - 2OC Characteristics off-delay timing relay with control contact - 0.05..1 s - 24 V AC DC - 2OC Product availability : Stock - Normally stocked in distribution facility Price* : 189.00 USD Main Range of product

More information

Wireless and batteryless pushbuttons

Wireless and batteryless pushbuttons Wireless and batteryless pushbuttons Harmony XBR Catalogue April 0 This document provided by Barr-Thorp Electric Co., Inc. 00-- This document provided by Barr-Thorp Electric Co., Inc. 00-- AR00-EN.indd

More information

RE7TP13BU adjustable on-delay timing relay s - 24 V AC DC - 2OC

RE7TP13BU adjustable on-delay timing relay s - 24 V AC DC - 2OC Characteristics adjustable on-delay timing relay - 0.05..1 s - 24 V AC DC - 2OC Price* : 189.00 USD Discontinued Main Range of product Product or component type Contacts type and composition Component

More information

Protection components

Protection components Multifunction protection relays LT-P Environment Conforming to standards IEC 947-4-1, IEC 34-11, IEC 755, VDE 010, VDE 00. &Ãmarking Meets the essential requirements of the Low Voltage equipment (LV) &

More information

DISCONNECT SWITCHES. UL Listed CSA Certified

DISCONNECT SWITCHES. UL Listed CSA Certified POWER & ACTUATION ENCLOSED DISCONNECT SWITCHES When you need an at-motor non-fused disconnect switch with superior performance, look to c3controls. Our Series E2 Enclosed Disconnects feature 3- and 4-Pole

More information

RE7CP13BU adjustable symmetrical flashing relay s - 24 V AC DC - 2OC

RE7CP13BU adjustable symmetrical flashing relay s - 24 V AC DC - 2OC Characteristics adjustable symmetrical flashing relay - 0.05..1 s - 24 V AC DC - 2OC Price* : 202.00 USD Discontinued Main Range of product Product or component type Contacts type and composition Component

More information

RXG12BD interface plug-in relay - Zelio RXG - 1C/O standard - 24VDC-10A-with LTB and LED

RXG12BD interface plug-in relay - Zelio RXG - 1C/O standard - 24VDC-10A-with LTB and LED Characteristics interface plug-in relay - Zelio RXG - 1C/O standard - 24VDC-10A-with LTB and LED Product availability : Stock - Normally stocked in distribution facility Price* : 7.20 USD Main Range of

More information

Protection components

Protection components General Application LT3-Si thermistor protection units continuously monitor the temperature of the machines to be protected (motors, generators, etc.) by means of PTC thermistor probes embedded in the

More information

TeSys circuit-breakers Thermal-magnetic motor circuit-breakers types GV2, GV3 and GV7

TeSys circuit-breakers Thermal-magnetic motor circuit-breakers types GV2, GV3 and GV7 Presentation Thermal-magnetic motor circuit-breakers types GV, GV and GV7 GV-ME, GV-P, GV-ME and GV7-R motor circuit-breakers are -pole thermal-magnetic circuit-breakers specifically designed for the control

More information

ATSU01N232LT soft starter for asynchronous motor - ATSU01-32 A V KW

ATSU01N232LT soft starter for asynchronous motor - ATSU01-32 A V KW Characteristics soft starter for asynchronous motor - ATSU01-32 A - 200..480V - 7.5..15 KW Main Range of product Product or component type Product destination Product specific application Device short

More information

ATSU01N222LT soft starter for asynchronous motor - ATSU01-22 A V KW

ATSU01N222LT soft starter for asynchronous motor - ATSU01-22 A V KW Characteristics soft starter for asynchronous motor - ATSU01-22 A - 200..480 V - 4..11 KW Price* : 195.00 GBP Main Range of product Product or component type Product destination Product specific application

More information

Utilization category DC-1 DC-3 DC-5 L/R 1 ms L/R 2 ms L/R 7.5 ms

Utilization category DC-1 DC-3 DC-5 L/R 1 ms L/R 2 ms L/R 7.5 ms controls IEC Technical data D.C. Power circuit switching Utilization category DC- DC- DC- L/R ms L/R ms L/R 7. ms + + + V A 6.0 6.0 6.0 8 V A 6.0 8.0.0 60 V A 6.0.0. V A 7.0. 0. 0 V A 0.8 0. V A 6.0 6.0

More information

RE7MY13MW time delay relay 8 functions s V AC DC - 2OC

RE7MY13MW time delay relay 8 functions s V AC DC - 2OC Characteristics time delay relay 8 functions - 0.05..1 s - 240 V AC DC - 2OC Main Range of product Product or component type Contacts type and composition Component name Time delay type Time delay range

More information

Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13

Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13 Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC

More information

Type CP-S, CP-C & CP-A Switch mode

Type CP-S, CP-C & CP-A Switch mode Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting

More information

Control module CP-A CM

Control module CP-A CM 2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel Approvals H UL 508, CAN/CSA C22.2 No.14 H UL 60950,

More information

Components for safety applications Preventa safety modules

Components for safety applications Preventa safety modules Selection guide Applications Modules For Emergency Stop and limit switch monitoring (modules integrated in Micro PLCs) Conforming to standards Machine IEC 204-, EN 292, EN 48 assemblies EN 60204- Principles

More information

RE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC

RE17RCMU off-delay timing relay - 1 s..100 h V AC - 1 OC Characteristics off-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal

More information

Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks

Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors

More information

NS..S contactor relays - with spring terminals AC operated

NS..S contactor relays - with spring terminals AC operated NS..S contactor relays - with spring terminals AC operated NSES 1SBC101015F00 Description NS..S contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed

More information

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay range Nominal

More information

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Control type [Us] rated supply voltage Voltage range Main Range of product Product or component

More information

AF AF V50/60HZ-DC Contactor. General Information. Ordering. Popular Downloads. Dimensions. Technical AF

AF AF V50/60HZ-DC Contactor. General Information. Ordering. Popular Downloads. Dimensions. Technical AF ABB AF12-30-01-14 250-500V50/60HZ-DC Contactor General Information Extended Product Type Product ID AF12-30-01-14 1SBL157001R1401 EAN 3471523110441 Catalog Description Long Description AF12-30-01-14 250-500V50/60HZ-DC

More information

ATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW

ATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW Characteristics soft starter for asynchronous motor - ATS01-22 A - 200..240 V - 4..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device

More information

Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet

Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication

More information

Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA

Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices

More information

Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts

Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from

More information

Increased safety - Group IIC XAWP series. Glass-reinforced polyester (GRP) -20 C C INERIS03ATEX0122X

Increased safety - Group IIC XAWP series. Glass-reinforced polyester (GRP) -20 C C INERIS03ATEX0122X Pendant stations ncreased safety - Group C XAWP series The pendant stations XAWP are suitable for all types of industry and primarily used on overhead cranes, cranes. They are available with 2, 4, 6 or

More information

ATS48D75Y soft starter for asynchronous motor - ATS48-65 A V KW

ATS48D75Y soft starter for asynchronous motor - ATS48-65 A V KW Characteristics soft starter for asynchronous motor - ATS48-65 A - 208..690 V - 15..55 KW Main Range of product Altistart 48 Product or component type Product destination Product specific application Device

More information

Snap Action Switches Technical Guide

Snap Action Switches Technical Guide These basic principles apply to all our precision switches. The specific characteristics of each model are given in more detail in the relevant production sections. Switch construction Single-pole changeover

More information

Instructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.

Instructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2. Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILER-22-G(24VDC) Catalog No. 010042 Eaton Catalog No. XTRM10A22TD EL-Nummer 4130354 (Norway) Product range DILER Mini-contactors Application

More information

Harmony Double and Triple- Headed Push Buttons. Catalog

Harmony Double and Triple- Headed Push Buttons. Catalog Harmony Double and Triple- Headed Push Buttons Catalog 2011 Improved selection, simplicity and robustness As a world leader in control and signaling components, Schneider Electric continues to innovate

More information

Electronic timer CT-SDS.22

Electronic timer CT-SDS.22 CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication

More information

3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching

3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL

More information

ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW

ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW Product datasheet Characteristics ATS01N206QN soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Complementary Assembly style Function available Supply voltage limits Main Range of

More information

SIRCO M UL 98 Load break switches standards UL and CSA from 30 to 100 A

SIRCO M UL 98 Load break switches standards UL and CSA from 30 to 100 A Load break switches standards UL and CSA The solution for Load break switches sircm_1_a_1_cat > Power distribution Strong points Function Rotary switch SRCO M 3 x 1 A SRCO M load break switches are compact

More information

RE17LLBM asymmetrical flashing relay s V AC - solid state output

RE17LLBM asymmetrical flashing relay s V AC - solid state output Characteristics asymmetrical flashing relay - 0.1..1 s - 24..240 V AC - solid state output Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 75.00 USD Main Range

More information

Three-phase monitoring relay CM-PFS

Three-phase monitoring relay CM-PFS Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available

More information

Detecting Devices. 8/2 Introduction

Detecting Devices. 8/2 Introduction Detecting Devices /2 Introduction /4 General data / 3SE5, plastic enclosures /16 3SE2, plastic enclosures /22 3SE5, metal enclosures /30 3SE2, metal enclosures /39 3SE3, metal enclosures Compact design

More information

Actuators Series 8602/3

Actuators Series 8602/3 > Large selection of actuators Pushbuttons Mushroom pushbuttons Rotary actuators Key-operated switches Mushroom stay-put buttons with key lock Mushroom stay-put buttons Twin pushbuttons Illuminated pushbuttons

More information

ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW

ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device

More information

References 1 for asynchronous motors 1

References 1 for asynchronous motors 1 References 1 DF56902 DF5690 DF56901 ATS 01N10FT ATS 01N212QN ATS 01N20LY for 0.7 to kw motors power Nominal current Reference (2) Weight Single phase -phase 20 V 210 V 20 V 20 V 400 V 460 V kw HP kw HP

More information

SIRCO M UL98 Load break switches standards UL and CSA 30 to 100 A

SIRCO M UL98 Load break switches standards UL and CSA 30 to 100 A The solution for Load break switches > Power distribution. sircm_100_a_1_cat Rotary switch SIRCO M 3 x 100 A Strong points > Total integration. > Wide range of accessories. > Upgradeability. > Compliance

More information

Safety detection solutions Preventa

Safety detection solutions Preventa Characteristics Light curtain type XUS LPpppp Environmental characteristics Conformity to standards ANSI/RIA R15.06, ANSI B11:19-1990, OSHA 1910.217(C), OSHA 1910.212, EN/IEC 61496-1-2 for type 4 ESPE

More information

Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA

Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA DATASHEET - DILA-22(230V50HZ,240V60HZ) Delivery program Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(230V50HZ,240V60HZ) Catalog No. 276399 Eaton Catalog No. XTRE10B22F EL-Nummer 0004130208 (Norway)

More information

Wireless, Batteryless Push Buttons

Wireless, Batteryless Push Buttons Wireless, Batteryless Push Buttons Harmony XBR Catalog 0 Introduction Figure A: radio transmission between transmitter and receivers Figure B: radio transmission between transmitters and receiver Introduction

More information

Type: DILEM 10(220V50HZ,240V60HZ) Article No.:

Type: DILEM 10(220V50HZ,240V60HZ) Article No.: Type: DILEM 10(220V50HZ,240V60HZ) Article No.: 051785 Ordering information Actuating voltage Description Connection technique 380 V 400 V I e A 8.8 Max. rating for three phase motors, 50 AC 3 220 V 230

More information

Control relays. K mini-control relays. 2 or 4 for CA2-K and CA3-K: 2 for CA4-K. Conforming to VDE 0110 group C V 750

Control relays. K mini-control relays. 2 or 4 for CA2-K and CA3-K: 2 for CA4-K. Conforming to VDE 0110 group C V 750 Characteristics Contact characteristics of mini-control relays and instantaneous contact blocks Number of contacts On CAp-K 4 On L-K 2 or 4 for C-K and CA3-K: 2 for CA4-K Rated operational voltage (Ue)

More information

Accessories. Accessories

Accessories. Accessories Series 61 16mm 22.5mm 21 x 21mm 21 x 27mm IP65 5 250V INDITOR PUSHUTTON E-STOP KEYLOK SELETOR hoose one component from each of the coloured sections to assemble a complete switch. For other options or

More information

Approved Standards. Ordering Information. Mini Contactor Relays 4-pole J7KNA-AR. Model Number Legend. Main contactor. Accessories

Approved Standards. Ordering Information. Mini Contactor Relays 4-pole J7KNA-AR. Model Number Legend. Main contactor. Accessories Mini Contactor Relays 4-pole J7KN-R ) Main contactor C & DC operated 4-, 6- and 8-pole versions in different configurations Mirror contacts Screw fixing and snap fitting (35 mm DIN rail) Rated current

More information

RE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC

RE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay

More information

ATV12H018F1 variable speed drive ATV kW hp V - 1ph

ATV12H018F1 variable speed drive ATV kW hp V - 1ph Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component

More information

RE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC

RE17RMMW time delay relay 10 functions - 1 s..100 h V AC/DC - 1 OC Characteristics time delay relay 10 functions - 1 s..100 h - 12..240 V AC/DC - 1 OC Main Range of product Product or component type Discrete output type Width Device short name Time delay type Time delay

More information

ATV12HU22M2. Main. Range of product Altivar 12. Component name Quantity per set Set of 1. Built-in fan. Motor power hp Communication port protocol

ATV12HU22M2. Main. Range of product Altivar 12. Component name Quantity per set Set of 1. Built-in fan. Motor power hp Communication port protocol Product datasheet Characteristics ATV12HU22M2 Complementary Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component name Variable

More information

02/11/2015

02/11/2015 Smart "Compact" range with display CD20 Smart Part number 88974053 Highly visible blue LCD with 4 lines of 18 characters and configurable backlighting Allow the use of the entire library of specific functions

More information

Specifications. Safety Ratings. Standards. Safety Classification

Specifications. Safety Ratings. Standards. Safety Classification General 1-2-Opto-electronics Safety Switches 4-Emergency Logic Power The Lifeline 4 cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a

More information

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC

RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Product availability : Stock - Normally stocked in distribution facility Price* : 42.90 USD Main Range of product Product or component

More information

02/11/2015

02/11/2015 "Compact" range with display CD12 Part number 88970041 Green LCD with 4 lines of 18 characters and configurable backlighting More cost effective solution Industrial temperature range (-20 C +55 C) Analogue

More information

Electronic timer CT-TGD.22

Electronic timer CT-TGD.22 2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection

More information

Custom "Compact" range with display CD20 Custom Part number

Custom Compact range with display CD20 Custom Part number Custom "Compact" range with display CD20 Custom Part number 88974051 "Modular" versions designed for Custom application-specific functions (Custom functions) LCD with 4 lines of 18 characters and configurable

More information

Electronic timer CT-SDD.22

Electronic timer CT-SDD.22 CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W

More information