TAC ATV38, IP55. Variable Speed Drives for Asynchronous Motors. 3-phase. 380/460 V, Hz
|
|
- Jean O’Connor’
- 5 years ago
- Views:
Transcription
1 TAC ATV8, IP55 Variable Speed Drives for Asynchronous Motors. -phase. 80/460 V, Hz E May 2004 ATV 8 IP55 drives are specifically designed for pump and fan applications powered by a three-phase supply 80 to 460 V in the power range 8.5 to 75 kw. They are housed inside a dust and damp proof enclosure which contains: - An ATV 8 drive - A line choke - A built in class B EMC filter A slot is provided for installing an additional contactor. The front panel has a hinged cover. For safety reasons, it can only be opened when the switch disconnector is in the OFF position. The underside of the enclosure should be fitted with cable glands via which the cables can be routed. Options Common functions of the ATV 8: - Powersuite software workshop (for further information about accessories and their relations, please refer to Schneider Altivar Catalogue) - Specific options for an IP 65 enclosure for the remote operator terminal. PART NUMBERS Three-phase supply voltage: V 50/60 Hz Motor Line current Iscprospective Nominal Max. transient Altivar TAC Weight power line Current (In) Current (2) Reference Reference kg () at at at at 80 V 460 V 80 V 460 V a b a b kw / HP A A ka ka A A A A 8,5 / ,4 ATV8ED25N4S / ATV8ED28N4S / ATV8EDN4S / ATV8ED46N4S / ATV8ED54N4S / ATV8ED64N4S / ATV8ED79N4S a: Values obtained with the selector switch in the 50Hz position (kw). b: Values obtained with the selector switch in the 60Hz position (HP). () These power levels are for a maximum switching frequency of 2 or 4 khz, depending on the rating, and continuous operation. Switching frequencies are detailed in the section on Technical Specifications. Using the ATV 8ED with a higher switching frequency: For continuous operation derate by one power rating, for example: TAC ATV8ED28N4 for 8,5 kw - TAC ATV8ED46N4 for 0 kw. If no power derating is applied, do not exceed the following operating conditions: Cumulative running time 6 s maximum per 60 s cycle (load factor 60%). (2) For 60 seconds. Accessories: For further information about accessories and their relations, please refer to Schneider Altivar 8 Catalogue. Subject to modification. (8) (EN)
2 DIMENSIONS AND FAN OUTPUT G2 The EMC mounting plate is supplied with clamps for ATV8HU8N4 to D79N4(X) drives. Fix the EMC equipotentiality mounting plate to the holes in the ATV8 heatsink using the screws supplied, as shown in the drawings above. H b H2 c 0 G a 8xØ Dimensions TAC ATV 8E a b c G G2 H H2 Ø D25N4, D28N4, DN4, D46N D54N4, D64N4, D79N KEYPAD OPERATION Front panel ESC ENT Scroll through menus or parameters and adjust a value. Reverses the direction of rotation. Use of keys and meaning of displays Flashing: indicates the selected direction of rotation Steady: indicates the direction of motor rotation LOC Indicates control via the terminal PROG Appears in setup and programming mode Flashing: indicates that a value has been modified but not saved 4-character display: displays numeric values and codes One line of 6 characters: displays messages in plain text Return to the previous menu or abort the current adjustment and return to the original value. Select a menu, confirm and save a selection or adjustment. If control via the terminal is active: FWD REV RUN FWD REV RUN ESC ENT STOP RESET Command to start the motor running. Rear view Use the display module delivered with the TAC ATV8 or a version 5. or above display module (see label on the rear view). Notes: The operator terminal may be connected and disconnected with the power on. If the terminal is disconnected when control of the drive via the terminal is enabled, the drive locks in fault mode SLF. Access locking switch: - position : Adjustment and configuration not accessible - position : Adjustment accessible - position : Adjustment and configuration accessible Connector: - for direct connection of the terminal to the drive - for remote operation, the terminal can be connected via a cable provided in the VWA580 kit Remote mounting of the terminal: Use the kit, reference VWA580, comprising cable with connectors, the kit for mounting on an enclosure door and the installation guide. STOP RESET Command to stop the motor or reset the fault. The key s "STOP" function can be inhibited via the program ("CONTROL" menu) (EN) 2 (8)
3 CHARACTERISTICS ENVIRONMENT Environment ATV8 HD25N4(X) to ATV8HCN4X Degree of protection IP 55 Vibration resistance ATV8HD25N4(X) to ATV8HD79N4(X) drives: Conforming to IEC :.5 mm peak from 2 to Hz gn from to 200 Hz Maximum ambient ATV8HD25N4(X) to ATV8HD79N4(X) pollution drives: - Degree conforming to UL508C Maximum relative humidity 9% without condensation or dripping water, conforming to IEC Ambient temperature Storage: -25 C to +65 C around the unit Operation: -0 C to +40 C Maximum operating altitude 000 m without derating (above this, derate the current by % per additional 00 m) Operating position Vertical Shock resistance Conforming to IEC , 0 gn for ms ELECTRICAL CHARACTERISTICS Power Voltage * 80 V - 0% to 460 V + 0% -phase supply Frequency * 50/60 Hz ± 5% Output voltage Maximum voltage equal to line supply voltage Electrical isolation Electrical isolation between power and control (inputs, outputs, power supplies) Output frequency range 0. to 500 Hz Switching frequency Configurable: without derating: khz for ATV8HU8N4 to D46N4(X) drives khz for ATV8HD54N4(X) to D79N4X drives 4 khz for ATV8HC0N4X to D79N4X drives Speed range to 0 Braking torque 0% of nominal motor torque without braking resistor (typical value) for low power ratings Transient overtorque 0% of nominal motor torque (typical values to ±0%) for 60 seconds Protection and safety features of drive Motor protection Short-circuit protection: - between output phases - between output phases and earth - on internal supply outputs Thermal protection against overheating and overcurrents Supply undervoltage and overvoltage safety circuits Loss of input phase safety circuit (avoids single-phase operation, on all -phase drives) Thermal protection integrated in drive via continuous calculation of I 2 t taking speed into account Motor thermal state saved when the drive is switched off. This function can be modified (via the operator terminal or programming terminal or via the PC software), depending on the type of motor cooling Protection against motor phase breaks Protection via PTC probes Subject to modification. (8) (EN)
4 CHARACTERISTICS SPECIAL USES Torque characteristics Variable torque applications: Available overtorque: Variable torque applications: 0% of the nominal motor torque for 60 seconds. T/Tn Continuous operation 0.5 For self-cooled motors, cooling is linked to the motor speed. Derating therefore occurs at speeds of less than half the nominal speed. Overspeed operation As the voltage can no longer change with the frequency, induction in the motor is reduced which results in a reduction in torque. Check with the manufacturer that the motor can operate at overspeed. 0 N (Hz) Self-cooled motor: continuous useful torque () 2 Force-cooled motor: continuous useful torque Transient overtorque.7 to 2 Tn 4 Torque in overspeed at constant power (2) Note: With a special motor, the nominal and maximum frequencies can be adjusted between 0 and 500 Hz using the operator terminal or PowerSuite tools. Switching the motor at the drive output The drive can be switched when locked or unlocked. If the drive is switched onthe-fly (drive unlocked), the motor is controlled and accelerates until it reaches the reference speed smoothly following the acceleration ramp. KM 0 N t t2 t t This use requires configuration of automatic catching a spinning load ( catch on the fly ) and activation of the function which manages the presence of a downstream contactor. t: deceleration without ramp t2: acceleration with ramp Example: breaking of downstream contactor Typical applications: breaking safety circuit at drive outputs, bypass function, switching of motors connected in parallel. TAC ATV 8 KM M (EN) 4 (8)
5 CONTROL TERMINALS Speed controller terminal characteristics - Connection terminal for shielding: for metal connector or clamp - 2 removable terminals, one for relay contacts, the other for low level I/O Arrangement of speed controller terminals Control card RA RB RC R2A R2C AO COM AI + 0 AI 2 LI LI 2 LI LI Maximum connection capacity :.5 mm 2 - AWG 4 - Max. tightening torque : 0.4 Nm. Function of speed controller terminals Terminal Function Electrical characteristics RA C/O contact at common point (RC) Min. switching capacity : RB of R fault relay 0 ma for 24 V DC RC Max. switching capacity on inductive load R2A N/O contact of R2 programmable (cos ϕ 0.4 and L/R 7 ms) : R2C relay.5 A for 250 V AC and 0 V DC AO Analog current output Analog output X-Y ma, X and Y are programmable Factory setting 0-20 ma impedance 500 Ω COM Common for logic and analog inputs AI Analog input for voltage Analog input V impedance 0 k Ω +0 Power supply for potentiometer +0 V ( %) 0 ma max. protected against shortwith setpoint to 0 k Ω circuits and overloads AI2 Analog input for current Analog input X - Y ma, X and Y are programmable Factory setting 4-20 ma impedance 00 Ω LI Logic inputs Programmable logic inputs LI2 impedance.5 k Ω LI Power supply + 24 V (max. 0 V) LI4 State 0 if < 5 V, state if > V + 24 Power supply for inputs + 24 V protected against short-circuits and overloads, min. 8 V, max. 0 V Max. flow rate 200 ma Subject to modification. 5 (8) (EN)
6 WIRING DIAGRAMS The shaded areas are to be wired by the user. To find the rating of a line contactor or a possible downstream contactor, refer to the Schneider catalogue for standard Altivar 8. Basic diagram: L L2 L A AI2 LI2 LI Adding a line contactor First disconnect the wires to terminals L, L2, L and connect them to the contactor, so as to reconnect the wiring with its ferrite cores if present. Then add wires between the contactor and terminals L, L2, L. - Q2 2 - T - Q Q S2 - S - KM A A2 - KM A - KM RA RC 4 L L2 L 5 U V W U V W R2C LI4 RA RB RC R2A +24 LI COM AI +0 AO M A (EN) 6 (8)
7 WIRING DIAGRAMS Adding a downstream contactor for TAC ATV8ED25N4 to TAC ATV8ED79N4 Use the downstream contactor control function with relay R2, or logic output LO (24 V AC) switching the coil using an I/O extension card. Consult the programming manual. Note: Fit interference suppressors to all inductive circuits near the speed controller or connected on the same circuit, such as relays, contactors, solenoid valves, fluorescent lighting, etc. A Q 2 U 4 V 5 W A A2 U V W 6 Q2 4 2 Q2 5 6 T R2C Q 2 R2A KM M 24 V DC external supply for supplying logic inputs A 0 V + 24 V COM LI LI LI LI + 24 Subject to modification. 7 (8) (EN)
8 (Blank page) Trademarks and registered trademarks are the property of their respective owners. TAC Vista, TAC Menta, TAC Xenta and TAC I-talk are registered trademarks of TAC AB. LonMark and LonWorks are registered trademarks of the Echelon Corporation. Windows is a registered trademark of Microsoft (EN) 8 (8)
Altivar 28 drive Altivar 28 enclosed drive
Telemecanique drive enclosed drive March 00 Characteristics : pages 0 to pages 4 to 2 Dimensions, schemes : pages 24 to 29 Presentation, functions Presentation A frequency inverter for -phase asynchronous
More informationATV12H018F1 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application
More informationATV12HU40M3 variable speed drive ATV12-4kW - 5hp V - 3ph - with heat sink
Characteristics variable speed drive ATV12-4kW - 5hp - 200..240V - 3ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
More informationATV12HU22M2. Main. Range of product Altivar 12. Component name Quantity per set Set of 1. Built-in fan. Motor power hp Communication port protocol
Product datasheet Characteristics ATV12HU22M2 Complementary Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component name Variable
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Product availability : Stock - Normally stocked in distribution facility Price* : 191.76 USD Main Range of
More informationATV212HU22M3X variable speed drive ATV kW - 3hp - 240V - 3ph - wo EMC - IP21
Product data sheet Characteristics ATV212HU22M3X variable speed drive ATV212-2.2kW - 3hp - 240V - 3ph - wo EMC - IP21 Product availability : Stock - Normally stocked in distribution facility Price* : 618.00
More informationReferences 1 for asynchronous motors 1
References 1 DF56902 DF5690 DF56901 ATS 01N10FT ATS 01N212QN ATS 01N20LY for 0.7 to kw motors power Nominal current Reference (2) Weight Single phase -phase 20 V 210 V 20 V 20 V 400 V 460 V kw HP kw HP
More informationATSU01N232LT soft starter for asynchronous motor - ATSU01-32 A V KW
Characteristics soft starter for asynchronous motor - ATSU01-32 A - 200..480V - 7.5..15 KW Main Range of product Product or component type Product destination Product specific application Device short
More informationATSU01N222LT soft starter for asynchronous motor - ATSU01-22 A V KW
Characteristics soft starter for asynchronous motor - ATSU01-22 A - 200..480 V - 4..11 KW Price* : 195.00 GBP Main Range of product Product or component type Product destination Product specific application
More informationIntroduction (continued) Altivar 12 variable speed drives
Introduction (continued) Altivar Drive with heatsink ATVH0M Drive on base plate ATVP0M An optimum solution The Altivar range of extends across a range of motor power ratings from 0. kw to kw on three types
More informationATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW
Characteristics soft starter for asynchronous motor - ATS01-22 A - 200..240 V - 4..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATV12H018M3 frekv.pretvarač promj.brzine ATV12 0,18 KW 0,25 ks V 3 faze
Podatkovni list proizvoda Karakteristike ATV12H018M3 frekv.pretvarač promj.brzine ATV12 0,18 KW 0,25 ks 200..240 V 3 faze Komplementarno Glavno Range of product Altivar 12 Product or component type Product
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATSU01N209LT soft starter for asynchronous motor - ATSU01-9 A V KW
Characteristics soft starter for asynchronous motor - ATSU01-9 A - 200..480V - 1.5..4 KW Product availability : Stock - Normally stocked in distribution facility Price* : 152.00 USD Main Range of product
More informationATS48D75Y soft starter for asynchronous motor - ATS48-65 A V KW
Characteristics soft starter for asynchronous motor - ATS48-65 A - 208..690 V - 15..55 KW Main Range of product Altistart 48 Product or component type Product destination Product specific application Device
More informationLXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name
More informationD SERIES EM16 IP 20 / NEMA 1 & IP 66 / NEMA 4X COMPACT VECTOR CONTROL DRIVE EM 16 COMPACT VECTOR CONTROL DRIVE
D SERIES EM16 IP 20 / NEMA 1 & IP 66 / NEMA 4X COMPACT VECTOR CONTROL DRIVE EM 16 COMPACT VECTOR CONTROL DRIVE 1 2 SERIES 1 2 pag. 4 pag. 5 Applications Model identification 3 pag. 5 4 pag. 6 Capacity
More informationEN 50178, IEC
Type: DF51 322 1K5 Article No.: 289107 Sales text """Frequency inverter DF51(1,5 kw; 230V) Ordering information Rated voltage U e V Max. rated operational current I e A 7.1 Rated power for motors at 230
More informationATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW
Characteristics soft starter for asynchronous motor - ATS01-25 A - 110..480V - 2.2..11 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW
Characteristics soft starter for asynchronous motor - ATS01-12 A - 110..480V - 1.5..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Product datasheet Characteristics ATS01N206QN soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Complementary Assembly style Function available Supply voltage limits Main Range of
More informationD SERIES LM16. COMPACT DRIVE V/f and SLV CONTROL. LM16 COMPACT DRIVE V/f and SLV CONTROL
D SERIES LM16 COMPACT DRIVE V/f and SLV CONTROL LM16 COMPACT DRIVE V/f and SLV CONTROL 1 2 SERIES 1 2 page 4 page 6 Introduction Fields of application 3 page 7 4 page 8 Designation Product offer 5 6 page
More informationLXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name
More informationSystem configuration. Ratings 400 V Class three-phase 90 to 800 kw 690 V Class three-phase 90 to 1000 kw SX-D. Frequency inverters.
~ ~ SX High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards
More informationBLEMO Frequenzumrichter. Siemensstraße 4 D Rodgau Dudenhofen Germany
2354235 11/2008 Soft start - soft stop unit SH31 User manual 09/2010 BLEMO Frequenzumrichter Siemensstraße 4 D-63110 Rodgau Dudenhofen Germany Tel.: ++49 / 6106 / 82 95-0 Fax: ++49 / 6106 / 82 95-20 Internet:
More informationLXM32AD18M2 motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW
Product data sheet Characteristics LXM32AD18M2 motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW Main Range of product Lexium 32 Product or component type Device short name
More informationLXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 0.4 kw Main Range of product Lexium 32 Product or component type Device short name
More informationSX (400V) System configuration
~ ~ SX (400V) High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards
More informationFan and Pump AC Inverter
Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings
More informationSX (400 V) System configuration
~ ~ SX (400 V) High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fuses (From 200 kw) Safety according EN13849-1 and EN62061 standards
More informationLXM32AD72N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32AD72N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 0.4 kw Main Range of product Lexium 32 Product or component type Device short name
More informationATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW
Characteristics soft starter for asynchronous motor - ATS01-3 A - 110..480V - 0.55..1.1 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More informationvacon nxs robust drive for heavy use
vacon nxs robust drive for heavy use the reliable choice The Vacon is a compact AC drive in the power range of 0.7 560 kw and supply voltages of 208 690 V for heavy use in machines, buildings and all branches
More informationVW3A4556 line choke mh A - 3 phases W - for variable speed drive
Characteristics line choke - 0.3 mh - 107 A - 3 phases - 260 W - for variable speed drive Main Range of product Product or component type Product compatibility Network number of phases Nov 4, 2018 Altivar
More informationSX (690 V) System configuration
SX (690 V) High performance Vector Control IP54 full range Compact design & Robustness Built-in Filter according to C3 Class Built-in Fuses (From 200 kw) Safety according EN13849-1 and EN62061 standards
More informationTECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection
Quick Start Guide TECO F510 Inverter This guide is to assist you in installing and running the inverter and verify that it is functioning correctly for it s main and basic features. For detailed information
More information/2008. Altistart 22. Soft start - soft stop unit. User manual 09/2009 BBV
2354235 11/2008 Altistart 22 Soft start - soft stop unit User manual 09/2009 BBV51330 www.schneider-electric.com Content Important Information 4 Before you begin 5 Documentation structure 6 Steps for
More informationManual Overview...1 2
GETTING STARTED CHAPTER 1 Contents of this Chapter... Manual Overview.....................................1 2 Overview of this Publication..................................1 2 Who Should Read This Manual...............................1
More informationInvertek Optidrive E3 Frequency Inverter (IP20, 3ph output) Easy Start Guide
Invertek Optidrive E3 Frequency Inverter (IP20, 3ph output) Easy Start Guide The Invertek Optidrive E3 Frequency Inverter range is available to order from inverterdrive.com This guide is intended to complement
More informationZelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationPowerFlex 400 Submittal
PowerFlex 400 Submittal Submittal Date: Project Name: Project Location: Consulting Engineer: Contractor: Contractor PO #: Distributor Name: Distributor Contact: Distributor Reference #: Note: This is general
More informationATS22C21Q soft starter-ats22-control 220V-power 230V(55kW)/ V(110kW)
Characteristics soft starter-ats22-control 220V-power 230V(55kW)/400...440V(110kW) Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 2383.00 USD Main Range of product
More informationUser's Guide for type ACS55 AC Drives from 0.18 to 2.2 kw
EN 5 User's Guide for type ACS55 AC Drives from 0.18 to 2.2 kw English EN EN 7 Safety instructions Altering the DIP switches will affect the function and performance of ACS55. Check that the changes will
More informationADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
More informationComp-AC. User s Manual for type ACS 140 frequency converters from 0.12 to 2.2 kw
Comp-AC User s Manual for type ACS 140 frequency converters from 0.12 to 2.2 kw ACS 140 Frequency Converter User s Manual 3BFE 64273736 R0125 EN Effective: 8.3.2000 2000 ABB Industry Oy Safety Warning!
More informationThis Chapter contains:
7 This Chapter contains: Table 7.1 Table 7-2 Table 7-3 Table 7-4 contains the general technical specifications for the MICROMASTER 430 inverter contains terminal tightening torques and the required cooling
More informationVSD Series II Variable Speed Micro Drives (VSM II) FS1 FS5
New Information Electric Current! Danger to Life! Only skilled or instructed persons may carry out the following operations. Variable Speed Micro Drives for Machinery Applications () VSxxx0_, VSxxx2x4_,
More informationThe GS1 Digital Keypad LED Display Function Keys Displaying the Status of the GS1 AC Drive Programming the GS1 AC Drive...
CHAPTER KEYPAD OPERATION 3 AND QUICKSTART Contents of this Chapter... The GS1 Digital Keypad................................3 2 LED Display..............................................3 2 Function Keys............................................3
More informationACH550 HVAC Drive Submittal
ACH550 HVAC Drive Submittal DATE: PROJECT NAME: CONTRACTOR: ENGINEER: SUBMITTED BY: SUBMITTALS FOR: RECORD APPROVAL (Return a copy of the approved submittal) ACH550 Features Standard Features UL and cul
More informationS11 Adjustable Speed Drive Engineering Specification
PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National
More informationsafety Doc: DPD00714C, Released: vacon 1 ONLY A COMPETENT ELECTRICIAN IS ALLOWED TO CARRY OUT THE ELECTRICAL INSTALLATION! 1.
safety Doc: DPD00714C, Released: 10.28.2011 vacon 1 This quick guide includes the essential steps for easy installation and setup of your Vacon 10 frequency converter. Before commissioning your drive,
More informationSRA 2250/6 RESISTOR ARS-01 RESISTOR AUTOMATICS
ELECTRICAL ENGINEERING DIVISION Distribution Network Department SRA 2250/6 RESISTOR ARS-01 RESISTOR AUTOMATICS ELA T150.2 en SRA 2250/6 Resistor specification The SRA 2250/6 Resistor is intended to increase
More informationPowerGard Series C 18-Pulse Enclosed Drive Controllers
PowerGard Series C 18-Pulse Enclosed Drive Controllers Combining adjustable speed drive and power quality solutions PowerGard Series C 18-Pulse Enclosed Drive Controllers Combining adjustable speed drive
More informationEmotron FDU 2.0 Variable Speed Drive
Data Sheet Emotron FDU 2.0 Variable Speed Drive Electrical specifications related to model Table 1 Typical motor power at mains voltage 400 V Model Max. output current for 60 s [Arms] Normal duty (120%)
More informationNX Series Inverters. HVAC Pocket Programming Guide
NX Series Inverters HVAC Pocket Programming Guide HVAC Pocket Programming Guide HVAC Pocket Programming Guide / Contents This guide provides a single reference document for the user of NXL HVAC (product
More informationAmbient Conditions Storage Conditions Installation Minimum Clearances and Air Flow...2 3
CHAPTER INSTALLATION 2 AND WIRING Contents of this Chapter... Ambient Conditions..............................2 2 Storage Conditions...............................2 2 Installation.....................................2
More informationVW3A4552. Price* : USD. ATV31CU22N4 - motor choke - 1 per drive. ATV31CU22N4 - line choke - 1 per drive
Characteristics Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1379.00 USD Main Range of product Product or component type Product compatibility Apr 06, 2018
More information02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
More informationAV-300i Specifications. Saftronics Inc. PC10 Product Specifications PC10. Mini Vector AC Drive
Saftronics Inc. www.saftronics.com TM AV-300i Specifications PC10 Product Specifications PC10 Mini Vector AC Drive 1 (1) T hree-phas e 230V input Drive Hp 1/8 1/4 1/2 1 2 3 5 7.5 10 Nominal applicable
More information02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
More informationOperating Instructions
4XH35QB151210 Small General Frequency Converter Operating Instructions 220V 0.75KW 5.5KW 400V 0.75KW 15KW Please read the instruction carefully and understand the contents so that it can be installed and
More informationAltistart 22. Sc~'leider. Soft start - soft stop unit. User manual. c.; Electric 09/ Schneider- Alii start 22
2354235 11/2008 Altistart 22 Soft start - soft stop unit User manual 09/2015 Schneider- Alii start 22 0 Eiectrrc. Rdy. Com. Run. T'll BBV51330 www.schneider-electric.com Sc~'leider c.; Electric The information
More informationAltivar 68 Telemecanique
Altivar 68 Telemecanique Programming manual Variable speed drives for asynchronous motors Contents Installation recommendations 3 Control 7 A - Display of references and actual values and configuration
More information02/11/2015
Smart range with Removable Terminal blocks XD26RBT Smart Part number 88974561 Designed for industrial, commercial, medical and paramedical machines Faster maintenance process which improves the machine
More informationThis operation manual is intended for users with basic knowledge of electricity and electric devices.
This operation manual is intended for users with basic knowledge of electricity and electric devices. Safety Information Safety Information Read and follow all safety instructions in this manual precisely
More informationGeneral Specifications FECA-TE /2010. Phone: Fax: Web:
General Specifications FECA-TE-117 06/2010 1. Standard Specifications 1) Three-phase 230V series Output ratings Input ratings Braking Item Specifications Type (FRN C1S-2U) F12 F25 F50 001 002 003 005 Nominal
More informationNX series Constant and variable torque Variable Speed Drives for induction motors
Honeywell All in One Application Manual NX series Constant and variable torque Variable Speed Drives for induction motors Subject to changes without notice CONTENTS NX "All in One" APPLICATION MANUAL INDEX
More informationProtection components
General Application LT3-Si thermistor protection units continuously monitor the temperature of the machines to be protected (motors, generators, etc.) by means of PTC thermistor probes embedded in the
More information"Modular" versions designed for application-specific functions LCD with 4 lines of 18 characters and configurable backlighting
Smart "Compact" range with display CD12 Smart Part number 88974043 "Modular" versions designed for application-specific functions LCD with 4 lines of 18 characters and configurable backlighting Type Input
More information02/11/2015
Smart "Compact" range with display CD20 Smart Part number 88974053 Highly visible blue LCD with 4 lines of 18 characters and configurable backlighting Allow the use of the entire library of specific functions
More informationVW3A4553 line/motor choke - 2 mh - 16 A - 3 phases - 75 W - for variable speed drive
Product data sheet Characteristics VW3A4553 line/motor choke - 2 mh - 16 A - 3 phases - 75 W - for variable speed drive The information provided in this documentation contains general descriptions and/or
More informationP-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control
P-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control NEW FIRMWARE MAKES SETUP A SNAP Application based commissioning allows parameters
More informationAF91 Adjustable Frequency Drives Series B
Effective: January, 00 Page New Information AF9 Adjustable Model AF9 Description Model AF9 Adjustable Frequency AC Drives are designed to provide adjustable speed control of -phase motors. These microprocessor-based
More informationThe Drive & Control Company. Frequency Converter. VFC 3610 / VFC 5610 Series. Quick Start Guide R Edition 10
The Drive & Control Company Frequency Converter VFC 3610 / VFC 5610 Series Quick Start Guide R912005518 Edition 10 Bosch Rexroth AG VFC 3610 / VFC 5610 Record of Revision Edition Release Date Notes DOK-RCON04-VFC-X610***-QU01-EN-P
More informationCHAPTER KEYPAD OPERATION AND QUICKSTART. In This Chapter... The GS2 Digital Keypad GS2 Quickstart...3 6
CHAPTER KEYPAD OPERATION 3 AND QUICKSTART In This Chapter... The GS2 Digital Keypad.....................3 2 LED Display.........................................3 2 LED Indicators.......................................3
More informationCustom "Compact" range with display CD20 Custom Part number
Custom "Compact" range with display CD20 Custom Part number 88974051 "Modular" versions designed for Custom application-specific functions (Custom functions) LCD with 4 lines of 18 characters and configurable
More informationType 3RW RW40 7. Control electronics Rated values. Terminal. external DC supply (to DIN 19240) through terminals and IN Relay outputs
Function have all the same advantages as the 3RW30/31 soft starters. At the same they come with additional functions and a two-phase control method (Polarity Balancing) that is unique in the rating range
More informationADJUSTABLE SPEED DRIVES. W7 Series. 18 Pulse
ADJUSTABLE SPEED DRIVES W7 Series 18 Pulse Meets or Exceeds Your Specifications Standard Specifications Item Voltage Class 460V Maximum HP 60 75 100 125 150 200 250 300 400 500 600 700 800 Drive Rating
More informationem4 em4 alert em4 alert 2G
em4 em4 alert em4 alert 2G Connect your equipment to the GPRS 2G network and get alerted by SMS or email Control your application by SMS Receive data reports by SMS or datalogs by email or FTP in.csv (Excel)
More informationInverter MICROMASTER 410
Inverter MICROMASTER 40 /2 Description /4 Circuit diagrams /6 Technical data /7 Selection and ordering data /8 Options /0 Dimension drawings Siemens DA 5.2 2005/2006 / MICROMASTER 40 Description Inverter
More informationDrive IT Low Voltage Drives. User's Guide for type ACS50 AC Drives from 0.18 to 0.75 kw
Drive IT Low Voltage Drives User's Guide for type ACS50 AC Drives from 0.18 to 0.75 kw ACS50 User s Guides in other languages can be found from internet: http://www.abb.com. Enter ACS50 UG into the Search
More informationem4 local - Robust Specific characteristics Part number
em4 em4 local em4 local Very compact and easy to program nanoplc Save time in designing your application using the most intuitive graphical function block language of the market Measure accurately your
More informationMODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
More informationADJUSTABLE SPEED DRIVES. HX7 Series. 18 Pulse. Phone: Fax: Web: -
ADJUSTABLE SPEED DRIVES HX7 Series 18 Pulse Toshiba HX7 In some industrial applications, users need reliable and efficient adjustable speed drives that do not contribute significant harmonic distortion
More informationEnglish 8 P EN.01/01.
English 8 P02 501 EN.01/01 www.schneider-electric.com General remarks The following symbols should assist you in handling the instructions: Advice, tip! General information, note exactly! The requirements
More information02/11/2015
"Compact" range with display CD12 Part number 88970041 Green LCD with 4 lines of 18 characters and configurable backlighting More cost effective solution Industrial temperature range (-20 C +55 C) Analogue
More informationTHYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE
MEIDEN AC SPEED CONTROL EQUIPMENT THYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE NOTICE 1. Read this manual thoroughly before using the VT110S, and store in
More informationATS01N106FT soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 110..480V - 0.75..3 KW Product availability : Stock - Normally stocked in distribution facility Price* : 115.00 USD Main Range of product
More informationEmotron FDU 2.0 Variable Speed Drive
Emotron FDU 2.0 Variable Speed Drive Data Sheet English Emotron FDU 2.0 Variable Speed Drive Electrical specifications related to model Table 1 Typical motor power at mains voltage 400 V Model Max. output
More informationLC2D09BL REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC Price* : 107.62 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
More information1. Institute of Electrical and Electronic Engineers (IEEE) a. Standard , IEEE Guide for Harmonic Content and Control.
Section 16680 VARIABLE SPEED DRIVE SYSTEMS OR AFD Part I - GENERAL I.01 Description A. This specification is to cover a complete adjustable frequency motor drive consisting of a pulse width modulated (PWM)
More informationProtection components
Multifunction protection relays LT-P Environment Conforming to standards IEC 947-4-1, IEC 34-11, IEC 755, VDE 010, VDE 00. &Ãmarking Meets the essential requirements of the Low Voltage equipment (LV) &
More informationVW3A4554 line/motor choke - 1 mh - 31 A - 3 phases - 90 W - for variable speed drive
Characteristics line/motor choke - 1 mh - 31 A - 3 phases - 90 W - for variable speed drive Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1720.00 USD Main Range
More informationE3 Adjustable Speed Drive Engineering Specification
E3 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba E3 AC Variable Frequency Drives, 6 pulse for 230V and 460V. 1.1 References A. National
More informationMODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
More informationVF-nC1 Adjustable Speed Drive Engineering Specification
PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba VF-nC1 AC Variable Frequency Drives, 6 pulse for 100V single-phase 0.1 to 0.75kW, 200V single-phase 0.2 to 2.2kW and 200V threephase 0.1
More informationSiemens OPERATING INSTRUCTIONS FOR MICROMASTER ECO & MIDIMASTER ECO V1.19. Variable speed drive for Fans and Pumps (HVAC) from 0,75kW to 315kW
Siemens OPERATING INSTRUCTIONS FOR MICROMASTER ECO & MIDIMASTER ECO V1.19 Variable speed drive for Fans and Pumps (HVAC) from 0,75kW to 315kW Siemens G85139-H1751-U555-D1 0 of 23 CONTENS SAFETY AND CE
More information3 - Protection components Circuit-breakers
Contents - Protection components Circuit-breakers for the motor protection Selection guide..............................................page /2 Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More information