NJU6366 Series. Small Sized Quartz Crystal Oscillator PACKAGE OUTLINE
|
|
|
- Betty Lang
- 6 years ago
- Views:
Transcription
1 Small Sized Quartz rystal Oscillator GENERAL DESRIPTION The NJU6366 series is a -MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 3-stage divider generates only one frequency selected of f 0,f 0 /2,f 0 /4 and f 0 /8 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is -MOS compatible Furthermore, the package is small-sized SOT PAKAGE OUTLINE NJU6366X- NJU6366XF1 FEATURES Operating Voltage 2.0 to 5.5V Maximum Oscillation Frequency 50MHz Low Operating urrent High Fan-out I OH /I OL 3-Stage Divider One of f 0,f 0 /2,f 0 /4 and f 0 /8 Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation apacitors g and g on-chip Package Outline Thin-hip/SOT MOS Technology PAD LOATION/PIN ONFIGURATION Thin-hip SOT ONT ONT LINE-UP TABLE Internal onnect Type No. g/d onnect Non onnect A f 0 A Line B,,D Line 23/23pF B f 0 /2 B Line A,,D Line 23/23pF NJU6366 f 0 /4 Line A,B,D Line 23/23pF D f 0 /8 D Line A,B, Line 23/23pF OORDINATES Pad Name X Y ONT BLOK DIAGRAM Starting Point:hip enter Unit[um] hip Size:0.67x0.75mm Thin-hip Thickness(-):260 20um Pad Size:90x90um Die Subsate: Level Rf 1/2 1/2 1/2 g d A B D 3-STATE BUFFER ONT 2016/08/22 ( 1 / 6 )
2 TERMINAL DESRIPTION SYMBOL FUNTION Oscillation and 3-state Output Buffer onol ONT ONT H or OPEN L Quartz rystal onnecting Terminals =0V Frequency Output =2.5V/3.0V/5.0V Note1) Refer to the line-up table. Output either one frequency selected of f 0, f 0 /2,f 0 /4 and f 0 /8 Note1) Oscillation Stop and High impedance Output ABSOLUTE MAXIMUM RATINGS (Ta=25 ) PARAMETER SYMBOL RATING UNIT Supply Voltage -0.5 to +7.0 V Input Voltage V IN -0.5 to +0.5 V Output Voltage V O -0.5 to +0.5 V Input urrent I IN 10 ma Output urrent I O 25 ma Power Dissipation Note4) P D 200(SOT ) mw Operating Temperature Range Topr -40 to +85 Storage Temperature Range Tstg -55 to +125 Note2) If the supply voltage( ) is less than 7.0V, the input voltage must not over the level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between and due to the stabilized operation for the circuit. Note4) The power dissipation is the maximum value at only the package. 2016/08/22 ( 2 / 6 )
3 ELETRIAL HARATERISTIS (Ta=25 ) PARAMETER SYMBOL ONDITIONS MIN TYP MAX UNIT Operating Voltage V ( =2.5V,Ta=25 ) PARAMETER SYMBOL ONDITIONS MIN TYP MAX UNIT A version,fosc=16mhz, L =15pF 5 Operating urrent I DD B version,fosc=16mhz, L =15pF 4 version,fosc=16mhz, L =15pF 3 ma D version,fosc=16mhz, L =15pF 3 Oscillation Stopping urrent I STB ONT =, No load 2 5 ua Stand-by urrent Ist ONT ==, No load Note5) 1 ua Input Voltage Output urrent V IH V V IL V I OH V OH =2.2V 4 ma I OL V OL =0.3V 4 ma Input urrent I IN ONT = ua ONT = ua 3-state Off Leakage urrent I OZ ONT =, = or 0.1 ua Feedback Resistance Rf 255 kω Internal apacitor g/d fosc=16mhz 23/23 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal SYM L / Symmey L / % Output Signal Rise L =15pF,10% to 90% 3 6 L =30pF,10% to 90% 3 6 Output Signal Fall L =15pF,90% to 10% 3 6 L =30pF,90% to 10% 3 6 Output Disable time t PLZ L =15pF,R UP =10kΩ 250 Output Enable t PZL L =15pF,R UP =10kΩ 250 Note5) Excluding input current on ONT Terminal. 2016/08/22 ( 3 / 6 )
4 ( =3.0V,Ta=25 ) PARAMETER SYMBOL ONDITIONS MIN TYP MAX UNIT A version,fosc=16mhz, L =15pF 6 Operating urrent I DD B version,fosc=16mhz, L =15pF 5 version,fosc=16mhz, L =15pF 4 ma D version,fosc=16mhz, L =15pF 4 Oscillation Stopping urrent I STB ONT =, No load 2 5 ua Stand-by urrent Ist ONT ==, No load Note5) 1 ua Input Voltage Output urrent V IH V V IL V I OH V OH =2.7V 5 ma I OL V OL =0.3V 5 ma Input urrent I IN ONT = ua ONT = ua 3-state Off Leakage urrent I OZ ONT =, = or 0.1 ua Feedback Resistance Rf 255 kω Internal apacitor g/d fosc=16mhz 23/23 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal SYM L / Symmey L / % Output Signal Rise L =15pF,10% to 90% 3 6 L =30pF,10% to 90% 3 6 Output Signal Fall L =15pF,90% to 10% 3 6 L =30pF,90% to 10% 3 6 Output Disable time t PLZ L =15pF,R UP =10kΩ 200 Output Enable t PZL L =15pF,R UP =10kΩ 200 Note5) Excluding input current on ONT Terminal. 2016/08/22 ( 4 / 6 )
5 ( =5.0V,Ta=25 ) PARAMETER SYMBOL ONDITIONS MIN TYP MAX UNIT A version,fosc=16mhz, L =15pF 10 Operating urrent I DD B version,fosc=16mhz, L =15pF 9 version,fosc=16mhz, L =15pF 9 ma D version,fosc=16mhz, L =15pF 8 Oscillation Stopping urrent I STB ONT =, No load 5 10 ua Stand-by urrent Ist ONT ==, No load Note5) 1 ua Input Voltage Output urrent V IH V V IL V I OH V OH =4.5V 8 ma I OL V OL =0.5V 8 ma Input urrent I IN ONT = ua ONT = ua 3-state Off Leakage urrent I OZ ONT =, = or 0.1 ua Feedback Resistance Rf 255 kω Internal apacitor g/d fosc=16mhz 23/23 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal SYM L / Symmey L / % Output Signal Rise L =15pF,10% to 90% 3 6 L =30pF,10% to 90% 3 6 Output Signal Fall L =15pF,90% to 10% 3 6 L =30pF,90% to 10% 3 6 Output Disable time t PLZ L =15pF,R UP =10kΩ 100 Output Enable t PZL L =15pF,R UP =10kΩ 100 Note5) Excluding input current on ONT Terminal. 2016/08/22 ( 5 / 6 )
6 MEASUREMENT IRUITS (1)Output Signal Symmey( L =15pF) Pulse Generator 1000pF 1/2 50Ω L=15pF H L (2)Output Signal Rise/Fall ( L =15pF) Pulse Generator 1000pF 50Ω L=15pF 90% 50% 10% (3)Output Disable/Enable ( L =15pF,R UP =10kΩ) R UP=10kΩ ONT Pulse Generator 50Ω ONT L=15pF t PLZ V OL V OH t PZL [AUTION] The specificatio on this data book are only given for information, without any guarantee as regards either mistakes or omissio. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the indusial rights. 2016/08/22 ( 6 / 6 )
Small Sized Quartz Crystal Oscillator. PAD LOCATION/PIN CONFIGURATION Thin-Chip
Small Sized Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6366 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output
1.5V Operation Fundamental Quartz Crystal Oscillator
1.5 Operation Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6369 series is a C-MOS IC for fundamental quartz crystal oscillator that coists of an oscillation amplifier, 5-stage divider
High Drive Fundamental Quartz Crystal Oscillator
High Drive Fundamental Quartz Crystal Oscillator NJU6368 Series PRELIMINARY GENERAL DESCRIPTION The NJU6368 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier,
High Drive Fundamental Quartz Crystal Oscillator
PRELIMINARY High Drive Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6360 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider
Quartz Crystal Oscillator IC with Selectable Divider
Quartz Crystal Oscillator IC with Selectable Divider GENERAL DESCRIPTION The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz. The oscillation amplifier incorporates feedback resistor and
Low Operating Current Fundamental Quartz Crystal Oscillator IC
Low Operating Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU66 series is a C-MOS IC for fundamental quartz crystal oscillator that consists of an oscillation amplifier, -stage divider
NJU6395 Series QUARTZ CRYSTAL OSCILLATOR
QUARTZ CRYSTAL OSCILLATOR NJU6395 Series GENERAL DESCRIPTION The NJU6395 series is up to 125MHz low-voltage C-MOS quartz crystal oscillator, the NJU6395A is up to 110MHz and the NJU6395B is up to 125MHz.
3rd. Over Tone Quartz Crystal Oscillator
3rd. Over Tone Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6377 series is a C-MOS 3rd. over tone quartz crystal oscillator that consists of an oscillation amplifier and 3-state output buffer.
32.768kHz output Tuning fork Quartz Crystal Oscillator IC
32.768kHz output Tuning fork Quartz Crystal Oscillator IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU6229 is a CMOS oscillator IC which is designed for 32.768kHz tuning fork quartz unit. The NJU6229 is
(V DD =1.62 to 3.63V, V SS =0V, Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT x1 version (f 0 ) No load V DD =1.8V
Low phase noise Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU6222 series is a C-MOS quartz crystal oscillator IC (20MHz to 50MHz) realized very low phase noise. It is consisted of
SERIAL I/O REAL TIME CLOCK
SERIAL REAL TIME CLOCK GENERAL DESCRIPTION The NJU6355 series is a serial real time clock suitable for 4 bits microprocessor. It contains quartz crystal oscillator, counter, shift register, voltage regulator,
NJU BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3715 is a 16-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as
NJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
NJU3712A 8-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712A is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3714A 12-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
12-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3714A is a 12-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3716A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
20-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3718 is a 20-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
NJU3719A 24-BIT SERIAL TO PARALLEL CONVERTER ! PACKAGE OUTLINE ! GENERAL DESCRIPTION ! PIN CONFIGURATION ! FEATURES !
24-BIT SERIAL TO PARALLEL CONVERTER! GENERAL DESCRIPTION The NJU3719A is a 24-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
SIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712 is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 4.5V to 5.5V. The effective
NJU7108 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR NJU78 GENERAL DESCRIPTION The NJU78 is a super small-sized package single C-MOS comparator with push pull output. The operating
High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
NJU7670V VOLTAGE TRIPLER PRELIMINARY
VOLTAGE TRIPLER GENERAL DESCRIPTION The NJU7670 is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double negative
Piezo-sounder Driver with Multi-mode charge pump. C 2 =0.1uF. C 1 =0.1uF CP1 CN1 CP2 CN2. Charge Pump (1x / 2x / 3x) Control Logic
Piezo-sounder Driver with Multi-mode charge pump NJU72501 GENERAL DESCRIPTION The NJU72501 is a switching driver with multi mode charge pump for piezo-sounder. It can drive outputs up to 18pp from 3 supply.
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
CF5073 series VCXO Module ICs with Built-in Varicap
XO Module ICs with Built-in Varicap OVERVIEW The CF5073 series are XO ICs with built-in varicap diode. They use a recently developed negative-resistance switching oscillation circuit, at oscillation startup
SGM9123 Triple, 8MHz, 3rd Order SDTV Video Filter Drivers
SGM9 Triple, MHz, rd Order GENERAL DESRIPTION SGM9 is a video buffer which integrates triple db Gain rail-to-rail output driver and triple rd output reconstruction filter, it has MHz -db bandwidth and
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL)
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL) Description: The NTE980 CMOS Micropower Phase Locked Loop (PLL) consists of a low power, linear voltage controlled oscillator (VCO) and
74AC821 74ACT Bit D-Type Flip-Flop with 3-STATE Outputs
74AC821 74ACT821 10-Bit D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT821 is a 10-bit D-type flip-flop with 3-STATE outputs arranged in a broadside pinout. Ordering Code: Features
NJU7670 VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE
VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE The is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double
Low Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
NJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
Single-phase DC Brushless Motor Driver IC *MEET JEDEC MO-187-DA / THIN TYPE. PIN No. PIN NAME 1 OUTB 2 VDD 3 IN+ 4 IN- 5 FG 6 PWM 7 OUTA 8 GND + -
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION The is a single-phase motor driver IC. It features lock detect, FG output and thermal shutdown circuit functions. The motor rotational speed
80CH COMMON / SEGMENT DRIVER FOR DOT MATRIX LCD
K006 0H OMMON / EGMENT RIVER FOR OT MATRIX L INTROUTION The K006 is an L driver LI which is fabricated by low power MO high voltage process technology. In segment driver mode, it can be interfaced in -bit
74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
SGM9115 Triple, 9MHz, 3rd Order SDTV Video Filter Drivers
Triple, 9MHz, rd Order PRODUT DESRIPTION SGM9 is a video buffer which integrates triple db Gain rail-to-rail output driver and triple rd output reconstruction filter, it has 9MHz -db bandwidth and V/µs
74LX1G07CTR SINGLE BUFFER/DRIVER (OPEN DRAIN)
SINGLE BUFFER/DRIVER (OPEN DRAIN) 5V TOLERANT INPUTS HIGH SPEED: t PD =4.2ns (MAX.) at V CC = 3.3V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C POWER DOWN PROTECTION ON INPUTS AND OUTPUTS POWER
Product Data Sheet XO5629 series Ultra-low Power KHz Crystal Oscillator IC. Features. Application. Ordering Information.
Features Wide range of operating supply voltage: 1.6V to 5.5V Low crystal drive current oscillation for miniature crystal units Ulta-Low power consumption(25ua/1.8v ) XO5629A/B series: for Wire Bonding
74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
74V1T126CTR SINGLE BUS BUFFER (3-STATE)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.6ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN
CF5008A1 2. VCXO Module IC OVERVIEW FEATURES SERIES CONFIGURATION ORDERING INFORMATION
NIPPON PRECISION CIRCUITS INC. CF5008A1 VCXO Module IC OVERVIEW The CF5008A1 is a VCXO module IC that employs a circuit structure with low parasitic capacitance effects and a wide frequency range. Built-in
Product Data Sheet XO5029 series KHz Crystal Oscillorator IC. Features. Application. Ordering Information. Description.
Features Wide range of operating supply voltage: 1.5V to 5.5V Low crystal drive current oscillation for miniature crystal units Low power consumption(0.18ma/1.8v) XO5029Bx series: for Wire Bonding (type
Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
NJU7046/NJU7047/NJU7048
NJU76/NJU77/NJU7 9V/μs High-Speed, Rail-to-rail I/O CMOS Operational Amplifier FEATURES (V + =V, V - =V, Ta= C) High Slew Rate 9V/µs Wide Bandwidth MHz Low Input Bias Current pa Rail-to-Rail Input and
MB GHz TWO MODULUS PRESCALER
Sept. 1995 Edition 3.0b ATA SHEET MB510 2.7GHz TWO MOULUS PRESALER 2.7GHz TWO MOULUS PRESALER The Fujitsu MB510 is an ultra high speed, two modulus prescaler that forms a Phase Locked Loop (PLL) when combined
74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs
74ALVC162245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs General Description The ALVC162245 contains sixteen non-inverting
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier GENERAL DESCRIPTION PACKAGE OUTLE The NJU8789 is a monaural BTL output switching driver for class D amplifier including Separated Power
NJU77000/NJU77001 NJU77002/NJU77004
.V,.23µA/ch, Ultralow Power, Rail-to-Rail Input/Output Single/Dual/Quad CMOS Operational Amplifier FEATURES (V + =V) Supply Current NJU77/NJU77.29µA typ..23µa/ch typ. Operating Voltage.V to.v Input Offset
Recommended crystal unit/ resonator. Fundamental, Fundamental, 3rd overtone, SAW. 80 to A1N No 2.5. SAW 110 to B1N
2.5V LVDS Output Oscillator ICs OVERVIEW The 5037 series are 2.5V operation, LVDS output oscillator ICs. They support 80MHz to 400MHz 3rd overtone oscillation and 80MHz to 600MHz fundamental oscillation.
FST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs
74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and
Recommended crystal unit/ resonator. 5036G 80 to A1 5036A2 3rd overtone, 5036B 2. Fundamental,
2.5V LV-PECL Output Oscillator ICs OVERVIEW The 5036 series are 2.5V operation, differential LV-PECL output oscillator ICs. They support 50MHz to 400MHz 3rd overtone oscillation and 50MHz to 600MHz fundamental
74V1T07CTR SINGLE BUFFER (OPEN DRAIN)
SINGLE BUFFER (OPEN DRAIN) HIGH SPEED: t PD = 4.3ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN PROTECTION
1/3, 1/4 Duty LCD Driver
1/3, 1/4 Duty LCD Driver GENERAL DESCRIPTION NJU6533 is a 1/3 or 1/4 duty segment type LCD driver. It incorporates 4 common driver circuits and 32 segment driver circuits. NJU6533 can drive maximum 96
C-MOS STEP-UP SWITCHING REGULATOR EQUIVALENT CIRCUIT
C-MOS STEP-UP SWITCHING REGULATOR GENERAL DESCRIPTION The NJU7262 series is a C-MOS step-up switching regulator which contains accurate voltage reference, error amplifier, CR oscillator, control circuit,
Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
74AC573 74ACT573 Octal Latch with 3-STATE Outputs
74AC573 74ACT573 Octal Latch with 3-STATE Outputs General Description The 74AC573 and 74ACT573 are high-speed octal latches with buffered common Latch Enable (LE) and buffered common Output Enable (OE)
NJM2373A/76 ADJUSTABLE HIGH PRECISION SHUNT REGULATOR
ADJUSTABLE HIGH PRECISION SHUNT REGULATOR GENERAL DESCRIPTION NJM373 / NJM373A / NJM376 is an adjustable high precision shunt regulator. The output voltage can be adjusted to any value between reference
Obsolete Product(s) - Obsolete Product(s)
HEX BUS BUFFER WITH 3 STATE OUTPUT INVERTING HIGH SPEED: t PD = 9 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
Wide-Input Sensorless CC/CV Step-Down DC/DC Converter
Wide-Input Sensorless /V Step-Down D/D onverter FEATURES 40V Input Voltage Surge 36V Steady State Operation Up to 3.5A Output urrent Output Voltage up to 12V 250kHz Switching Frequency 91% Efficiency (Vout
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
NJM271 ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM271 is an ultra high speed hex operational amplifier. It can swings 26V/µs high slew rate and 1GHz gain band width product(1mhz
Obsolete Product(s) - Obsolete Product(s)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 10 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
8-BIT SERIAL-INPUT SHIFT REGISTER WITH LATCHED 3-STATE OUTPUTS High-Performance Silicon-Gate CMOS
8-BIT SERIAL-INPUT SHIFT REGISTER WITH LATCHED -STATE OUTPUTS High-Performance Silicon-Gate CMOS The IN74HC4094 is identical in pinout to the LS/ALS4094. The device inputs are compatible with standard
HCF4044B QUAD NAND 3-STATE R-S LATCH
QUAD NAND 3-STATE R-S LATCH QUIESCENT CURRENT SPECIFIED UP TO 20V 3-LEVEL OUTPUTS WITH COMMON OUTPUT ENABLE SEPARATE SET AND RESET INPUT FOR EACH LATCH 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE
M74HCT244TTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V
Phase-Locked Loop High-Performance Silicon-Gate CMOS
TECHNICAL DATA Phase-Locked Loop High-Performance Silicon-Gate CMOS The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The IN74HC4046A
Wide-Input Sensorless CC/CV Step-Down DC/DC Converter
Wide-Input Sensorless /V Step-Down D/D onverter FEATURES 40V Input Voltage Surge 36V Steady State Operation Up to 3.5A output current Output Voltage up to 18V 125kHz Switching Frequency Eases EMI Design
HD44105D. (Dot Matrix Liquid Crystal Graphic Display Common Driver) Description. Features. Ordering Information
(Dot atrix Liquid Crystal Graphic Display Common Driver) Description The HD44105 is a common signal driver for LCD dot matrix graphic display systems. It generates the timing signals required for display
HD61103A. (Dot Matrix Liquid Crystal Graphic Display 64-Channel Common Driver) Features. Description. Ordering Information
(Dot Matrix Liquid Crystal Graphic Display 64-Channel Common Driver) Description The is a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals (switch
LC7215, 7215F, 7215FM. MW/LW PLL Frequency Synthesizers. Package Dimensions. Overview. Features
Ordering number: EN 3584B Silicon-gate CMOS LSI LC7215, 7215F, 7215FM MW/LW PLL Frequency Synthesizers Overview The LC7215, LC7215F and LC7215FM are phase-locked-loop frequency synthesizer LSIs that provide
74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs
Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General Description The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing
74ACTQ Bit Buffer/Line Driver with 3-STATE Outputs
18-Bit Buffer/Line Driver with 3-STATE Outputs General Description The ACTQ18825 contai eighteen non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address driver, clock
NJM2722. Single Ultra-High speed and Wide Band Operational Amplifier
Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM2722 is a single, ultra-high speed and wide band operational amplifier that features 1V/μs slew rate and 1ohm load
*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1
9-984; Rev ; 5/ High-urrent, Ω, SPST, MOS General Description Maxim s are medium-voltage MOS analog switches with low on-resistance of Ω max, specifically designed to handle large switch currents. With
ICS2510C. 3.3V Phase-Lock Loop Clock Driver. Integrated Circuit Systems, Inc. General Description. Pin Configuration.
Integrated Circuit Systems, Inc. ICS250C 3.3V Phase-Lock Loop Clock Driver General Description The ICS250C is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology
Chapter 6 DIFFERENT TYPES OF LOGIC GATES
Chapter 6 DIFFERENT TYPES OF LOGIC GATES Lesson 8 NMOS gates Ch06L8-"Digital Principles and Design", Raj Kamal, Pearson Education, 2006 2 Outline NMOS (n-channel based MOSFETs based circuit) NMOS Features
NJM2783. Preliminary. Monaural Microphone Amplifier with ALC
Preliminary NJM2783 Monaural Microphone Amplifier with ALC GENERAL DESCRIPTION The NJM2783 is a monaural microphone amplifier with auto level control function to avoid distortion due to clipping. The voltage
SCAN18374T D-Type Flip-Flop with 3-STATE Outputs
SCAN18374T D-Type Flip-Flop with 3-STATE Outputs General Description The SCAN18374T is a high speed, low-power D-type flipflop featuring separate D-type inputs organized into dual 9- bit bytes with byte-oriented
NJU7116 SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR
SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7 is a super low operating current and low offset voltage tiny single CMOS comparator
USB1T20 Universal Serial Bus Transceiver
Features Complies with Universal Serial Bus Specification 2.0 for FS/LS Applications Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed (FS) and 1.5Mbit/s
74LVC16245A/ 74LVCH16245A 16-bit bus transceiver with direction pin; 5V tolerant (3-State)
INTEGRATED CIRCUITS 16-bit bus transceiver with direction pin; 5V tolerant Supersedes data of 1997 Aug 1 IC24 Data Handbook 1997 Sep 25 FEATURES 5 volt tolerant inputs/outputs for interfacing with 5V logic
ILX485 Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers
Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers General Description The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. I contains one driver and one receiver. The driver
74AC299 74ACT299 8-Input Universal Shift/Storage Register with Common Parallel I/O Pins
8-Input Universal Shift/Storage Register with Common Parallel I/O Pi General Description The AC/ACT299 is an 8-bit universal shift/storage register with 3-STATE outputs. Four modes of operation are possible:
FST Bit Bus Switch
Features 4 Ω Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low I CC Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level Description December 2012
PO3B10A. Truth Table. High Bandwidth Potato Chip. 2-Channel, 2:1 Mux/DeMux Switch w/ Single Enable GND V DD GND SEL
PO3B0A www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 3.5Gbps or.75ghz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally
LOW VOLTAGE AUDIO POWER AMPLIFIER
LOW VOLTAGE AUDIO POWER AMPLIFIER NJM19 GENERAL DESCRPTION The NJM19 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential
Designated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
CLASS D AMPLIFIER FOR DIGITAL AUDIO ! PACKAGE OUTLINE ! PIN CONFIGURATION V DD STBY TEST MUTE V DDL OUT LP V SSL OUT LN RST V SS
PRELIMINARY CLASS D AMPLIFIER FOR DIGITAL AUDIO! GENERAL DESCRIPTION The NJU8725 is an 800mW-output class D Amplifier featuring 6 th Σ modulation. It includes Digital Attenuator, Mute, and De-emphasis
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM2742 is a high speed single supply operational amplifier.the low V OL enables to treat small output signal on a single supply.
5059H series 32kHz output Crystal Oscillator Module ICs
32kHz output Crystal Oscillator Module ICs OVERVIEW The 5059H series are 32.768kHz output and 125 C operation crystal oscillator module ICs with divide-by-512 (or divide-by-1024) frequency, AT-cut crystal
TC74LCX07F,TC74LCX07FN,TC74LCX07FT,TC74LCX07FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74LCX07F/FN/FT/FK TC74LCX07F,TC74LCX07FN,TC74LCX07FT,TC74LCX07FK Low-Voltage HEX Buffer with 5-V Tolerant Inputs and Outputs (open drain) The
Obsolete Product(s) - Obsolete Product(s)
QUAD 2 CHANNEL MULTIPLEXER (3-STATE) HIGH SPEED : t PD = 11 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs
Octal Buffer/Line Driver with 3-STATE Outputs General Description The AC/ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus-oriented tramitter/receiver
Obsolete Product(s) - Obsolete Product(s)
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: t PD = 13 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
Obsolete Product(s) - Obsolete Product(s)
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: t PD = 12 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
QS54/74FCT373T, 2373T. High-Speed CMOS Bus Interface 8-Bit Latches MDSL QUALITY SEMICONDUCTOR, INC. 1 DECEMBER 28, 1998
Q QUALITY SEMICONDUCTOR, INC. QS54/74FCT373T, 2373T High-Speed CMOS Bus Interface 8-Bit Latches QS54/74FCT373T QS54/74FCT2373T FEATURES/BENEFITS Pin and function compatible to the 74F373 74FCT373 and 74ABT373
USB1T11A Universal Serial Bus Transceiver
Features Complies with Universal Serial Bus Specification 1.1 Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed and 1.5Mbit/s Low Speed Serial Data
INTEGRATED CIRCUITS. 74F219A 64-bit TTL bipolar RAM, non-inverting (3-State) Product specification 1996 Jan 05 IC15 Data Handbook
INTEGRATED CIRCUITS 64-bit TTL bipolar RAM, non-inverting (3-State) 1996 Jan 5 IC15 Data Handbook FEATURES High speed performance Replaces 74F219 Address access time: 8 max vs 28 for 74F219 Power dissipation: