High Drive Fundamental Quartz Crystal Oscillator
|
|
|
- Basil O’Connor’
- 5 years ago
- Views:
Transcription
1 PRELIMINARY High Drive Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6360 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 5-stage divider generates only one frequency selected of f 0,f 0 /2,f 0 /4 f 0 /8, f 0 /16 and f 0 /32 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible and can drive 50pF(@5V) C-MOS load. PACKAGE OUTLINE NJU6360XC-D FEATURES Operating Voltage 2.7 to 5.5V Maximum Oscillation Frequency 50MHz Low Operating High Fan-out I OH /I OL =8mA@3.3V I OH /I OL =16mA@5.0V 5-Stage Divider Maximum Divider f 0 /32 Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation Capacitors Cg and Cg on-chip Package Outline C-MOS Technology Thin-Chip PAD LOCATION Thin-Chip LINE-UP TABLE Type No. Internal Connect Cg/Cd A f 0 Connected A Line 15/15pF B f 0 /2 Connected B Line 15/15pF NJU6360 C f 0 /4 Connected C Line 15/15pF D f 0 /8 Connected D Line 15/15pF E f 0 /16 Connected E Line 15/15pF F f 0 /32 Connected F Line 15/15pF COORDINATES No Pad Name X Y Starting Point:Chip Center Unit[um] Chip Size:0.7x0.75mm Thin-Chip Thickness(-D):200±20um Pad Size:90x90um BLOCK DIAGRAM Rf VDD VSS 1/ 2 Cg Cd A B C D E F 3 STATE BUFFER 2003/01/29 ( 1 / 5 )
2 TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Conol H or OPEN L Quartz Crystal Connecting Terminals =0V Frequency Output =2.5/3.0V/5.0V Note1) Refer to the line-up table. Output either one frequency selected of f 0, f 0 /2,f 0 /4,f 0 /8, f 0 /16 and f 0 /32 Note1) Oscillation Stop and High impedance Output ABSOLUTE MAXIMUM RATINGS (Ta=25 C) PARAMETER SYMBOL RATING UNIT Supply Voltage -0.5 to +7.0 V Input Voltage V IN -0.5 to +0.5 V Output Voltage V O -0.5 to +0.5 V Input I IN ±10 MA Output I O ±25 MA Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage( ) is less than 7.0V, the input voltage must not over the level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between and due to the stabilized operation for the circuit. 2003/01/29 ( 2 / 5 )
3 ELECTRICAL CHARACTERISTICS (Ta=25 C) Operating Voltage V ( =3.3V,Ta=25 C) A version,fosc=16mhz,c L =30pF 8 B version,fosc=16mhz,c L =30pF 6 Operating I DD C version,fosc=16mhz,c L =30pF 4 D version,fosc=16mhz,c L =30pF 3 ma E version,fosc=16mhz,c L =30pF 3 F version,fosc=16mhz,c L =30pF 3 Oscillation Stopping I STB =, No load 2 5 ua Stand-by Ist ==, No load Note4) 1 ua Input Voltage Output V IH V V IL V I OH V OH =2.97V 8 ma I OL V OL =0.33V 8 ma Input I IN = ua = ua 3-state Off Leakage I OZ =, = or ±0.1 ua Feedback Resistance Rf 255 KΩ Internal Capacitor Cg/Cd fosc=16mhz, A/B/C/D/E/F version 15/15 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L / SYM Symmey C L / % Output Signal Rise C L =15pF,10% to 90% 3 6 C L =30pF,10% to 90% 4 8 Output Signal Fall C L =15pF,90% to 10% 3 6 C L =30pF,90% to 10% 4 8 Output Disable time T PLZ C L =15pF,R UP =10kΩ 150 Ns Output Enable T PZL C L =15pF,R UP =10kΩ 150 Ns Note4) Excluding input current on Terminal. 2003/01/29 ( 3 / 5 )
4 ( =5.0V,Ta=25 C) A version,fosc=16mhz,c L =50pF 15 B version,fosc=16mhz,c L =50pF 11 Operating I DD C version,fosc=16mhz,c L =50pF 9 D version,fosc=16mhz,c L =50pF 7 ma E version,fosc=16mhz,c L =50pF 7 F version,fosc=16mhz,c L =50pF 7 Oscillation Stopping I STB =, No load 5 10 UA Stand-by Ist ==, No load Note4) 1 UA Input Voltage Output V IH V V IL V OH =4.5V V I OH V OL =0.5V 12 ma I OL = ma Input I IN = UA =, = or ua 3-state Off Leakage I OZ ±0.1 ua Feedback Resistance Rf 255 KΩ Internal Capacitor Cg/Cd fosc=16mhz, A/B/C/D/E/F version 15/15 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L / SYM Symmey C L / % Output Signal Rise C L =15pF,10% to 90% 3 6 C L =50pF,10% to 90% 4 8 Output Signal Fall C L =15pF,90% to 10% 3 6 C L =50pF,90% to 10% 4 8 Output Disable time T PLZ C L =15pF,R UP =10kΩ 100 Output Enable T PZL C L =15pF,R UP =10kΩ 100 Note4) Excluding input current on Terminal. 2003/01/29 ( 4 / 5 )
5 MEASURMENT CIRCUITS (1)Output Signal Symmey(C L =15/30/50pF) 1000pF 1/2 C L H L (2)Output Signal Rise/Fall (C L =15/30/50pF) 1000pF C L 90% 50% 10% (3)Output Disable/Enable (C L =15pF,R UP =10kΩ) R UP=10kΩ C L=15pF T PLZ V OL V OH T PZL [CAUTION] The specificatio on this data book are only given for information, without any guarantee as regards either mistakes or omissio. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the indusial rights. 2003/01/29 ( 5 / 5 )
1.5V Operation Fundamental Quartz Crystal Oscillator
1.5 Operation Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6369 series is a C-MOS IC for fundamental quartz crystal oscillator that coists of an oscillation amplifier, 5-stage divider
High Drive Fundamental Quartz Crystal Oscillator
High Drive Fundamental Quartz Crystal Oscillator NJU6368 Series PRELIMINARY GENERAL DESCRIPTION The NJU6368 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier,
Small Sized Quartz Crystal Oscillator. PAD LOCATION/PIN CONFIGURATION Thin-Chip
Small Sized Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6366 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output
3rd. Over Tone Quartz Crystal Oscillator
3rd. Over Tone Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6377 series is a C-MOS 3rd. over tone quartz crystal oscillator that consists of an oscillation amplifier and 3-state output buffer.
Quartz Crystal Oscillator IC with Selectable Divider
Quartz Crystal Oscillator IC with Selectable Divider GENERAL DESCRIPTION The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz. The oscillation amplifier incorporates feedback resistor and
Low Operating Current Fundamental Quartz Crystal Oscillator IC
Low Operating Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU66 series is a C-MOS IC for fundamental quartz crystal oscillator that consists of an oscillation amplifier, -stage divider
NJU6395 Series QUARTZ CRYSTAL OSCILLATOR
QUARTZ CRYSTAL OSCILLATOR NJU6395 Series GENERAL DESCRIPTION The NJU6395 series is up to 125MHz low-voltage C-MOS quartz crystal oscillator, the NJU6395A is up to 110MHz and the NJU6395B is up to 125MHz.
NJU6366 Series. Small Sized Quartz Crystal Oscillator PACKAGE OUTLINE
Small Sized Quartz rystal Oscillator GENERAL DESRIPTION The NJU6366 series is a -MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer.
32.768kHz output Tuning fork Quartz Crystal Oscillator IC
32.768kHz output Tuning fork Quartz Crystal Oscillator IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU6229 is a CMOS oscillator IC which is designed for 32.768kHz tuning fork quartz unit. The NJU6229 is
(V DD =1.62 to 3.63V, V SS =0V, Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT x1 version (f 0 ) No load V DD =1.8V
Low phase noise Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU6222 series is a C-MOS quartz crystal oscillator IC (20MHz to 50MHz) realized very low phase noise. It is consisted of
SERIAL I/O REAL TIME CLOCK
SERIAL REAL TIME CLOCK GENERAL DESCRIPTION The NJU6355 series is a serial real time clock suitable for 4 bits microprocessor. It contains quartz crystal oscillator, counter, shift register, voltage regulator,
NJU BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3715 is a 16-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as
NJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
SIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
NJU3712A 8-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712A is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3714A 12-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
12-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3714A is a 12-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3716A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport
CF5073 series VCXO Module ICs with Built-in Varicap
XO Module ICs with Built-in Varicap OVERVIEW The CF5073 series are XO ICs with built-in varicap diode. They use a recently developed negative-resistance switching oscillation circuit, at oscillation startup
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
20-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3718 is a 20-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
Low Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
NJU3719A 24-BIT SERIAL TO PARALLEL CONVERTER ! PACKAGE OUTLINE ! GENERAL DESCRIPTION ! PIN CONFIGURATION ! FEATURES !
24-BIT SERIAL TO PARALLEL CONVERTER! GENERAL DESCRIPTION The NJU3719A is a 24-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
APPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
NJU7108 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR NJU78 GENERAL DESCRIPTION The NJU78 is a super small-sized package single C-MOS comparator with push pull output. The operating
Chapter 6 DIFFERENT TYPES OF LOGIC GATES
Chapter 6 DIFFERENT TYPES OF LOGIC GATES Lesson 8 NMOS gates Ch06L8-"Digital Principles and Design", Raj Kamal, Pearson Education, 2006 2 Outline NMOS (n-channel based MOSFETs based circuit) NMOS Features
CF5008A1 2. VCXO Module IC OVERVIEW FEATURES SERIES CONFIGURATION ORDERING INFORMATION
NIPPON PRECISION CIRCUITS INC. CF5008A1 VCXO Module IC OVERVIEW The CF5008A1 is a VCXO module IC that employs a circuit structure with low parasitic capacitance effects and a wide frequency range. Built-in
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712 is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 4.5V to 5.5V. The effective
IPS009 series IC CMOS SPXO
IPS009 series IC CMOS SPXO Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application
NJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
IPS009 series IC CMOS SPXO
IPS009 series IC Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application to the
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
NJU6385. Low phase noise Fundamental Quartz Crystal Oscillator IC.
Low phase noise Fundamental Quartz Crystal Oscillator IC FETURES( =3.3V, f 0 =49.152MHz, Ta=25 C) Phase noise -103dBc/Hz(Typ.) @10Hz Offset -163dBc/Hz(Typ.) @1kHz Offset RMS Jitter 0.05psec(Typ.) @12kHz
XC2163 Series GENERAL DESCRIPTION APPLICATIONS FEATURES PIN ASSIGNMENT PIN CONFIGURATION /INH, Q0 PIN FUNCTION
ETR1403_001a ICs for use with 3rd Overtone Crystal Oscillators GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
Piezo-sounder Driver with Multi-mode charge pump. C 2 =0.1uF. C 1 =0.1uF CP1 CN1 CP2 CN2. Charge Pump (1x / 2x / 3x) Control Logic
Piezo-sounder Driver with Multi-mode charge pump NJU72501 GENERAL DESCRIPTION The NJU72501 is a switching driver with multi mode charge pump for piezo-sounder. It can drive outputs up to 18pp from 3 supply.
High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
1/3, 1/4 Duty LCD Driver
1/3, 1/4 Duty LCD Driver GENERAL DESCRIPTION NJU6533 is a 1/3 or 1/4 duty segment type LCD driver. It incorporates 4 common driver circuits and 32 segment driver circuits. NJU6533 can drive maximum 96
Single-phase DC Brushless Motor Driver IC *MEET JEDEC MO-187-DA / THIN TYPE. PIN No. PIN NAME 1 OUTB 2 VDD 3 IN+ 4 IN- 5 FG 6 PWM 7 OUTA 8 GND + -
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION The is a single-phase motor driver IC. It features lock detect, FG output and thermal shutdown circuit functions. The motor rotational speed
5056 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The 556 series are 7 to 135MHz oscillation frequency, crystal oscillator module ICs optimized for 3rd overtone crystal elements with C 2 to 4pF. They have built-in
NJU7670V VOLTAGE TRIPLER PRELIMINARY
VOLTAGE TRIPLER GENERAL DESCRIPTION The NJU7670 is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double negative
74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs
74ALVC162245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs General Description The ALVC162245 contains sixteen non-inverting
5059H series 32kHz output Crystal Oscillator Module ICs
32kHz output Crystal Oscillator Module ICs OVERVIEW The 5059H series are 32.768kHz output and 125 C operation crystal oscillator module ICs with divide-by-512 (or divide-by-1024) frequency, AT-cut crystal
74AC821 74ACT Bit D-Type Flip-Flop with 3-STATE Outputs
74AC821 74ACT821 10-Bit D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT821 is a 10-bit D-type flip-flop with 3-STATE outputs arranged in a broadside pinout. Ordering Code: Features
Product Data Sheet XO5629 series Ultra-low Power KHz Crystal Oscillator IC. Features. Application. Ordering Information.
Features Wide range of operating supply voltage: 1.6V to 5.5V Low crystal drive current oscillation for miniature crystal units Ulta-Low power consumption(25ua/1.8v ) XO5629A/B series: for Wire Bonding
NJU7385. Dual H-bridge Driver for actuator
Dual H-bridge Driver for actuator GENERAL DESCRIPTION The NJU7385 is a dual H-bridge driver IC that has general versatility for a compact actuator. The Mode Select Function in the control part can select
74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
Recommended crystal unit/ resonator. 5036G 80 to A1 5036A2 3rd overtone, 5036B 2. Fundamental,
2.5V LV-PECL Output Oscillator ICs OVERVIEW The 5036 series are 2.5V operation, differential LV-PECL output oscillator ICs. They support 50MHz to 400MHz 3rd overtone oscillation and 50MHz to 600MHz fundamental
Product Data Sheet XO5029 series KHz Crystal Oscillorator IC. Features. Application. Ordering Information. Description.
Features Wide range of operating supply voltage: 1.5V to 5.5V Low crystal drive current oscillation for miniature crystal units Low power consumption(0.18ma/1.8v) XO5029Bx series: for Wire Bonding (type
ICS2510C. 3.3V Phase-Lock Loop Clock Driver. Integrated Circuit Systems, Inc. General Description. Pin Configuration.
Integrated Circuit Systems, Inc. ICS250C 3.3V Phase-Lock Loop Clock Driver General Description The ICS250C is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology
NJU7670 VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE
VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE The is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double
C-MOS STEP-UP SWITCHING REGULATOR EQUIVALENT CIRCUIT
C-MOS STEP-UP SWITCHING REGULATOR GENERAL DESCRIPTION The NJU7262 series is a C-MOS step-up switching regulator which contains accurate voltage reference, error amplifier, CR oscillator, control circuit,
2.5V, 3.3V LVCMOS 1:18 Clock Fanout Buffer
2.5V, 3.3V LVCMOS 1:18 Clock Fanout Buffer Features 18 LVCMOS outputs enable to drive up to 36 clock lines LVCMOS/LVTTL input 2.5V or 3.3V power supply Clock output frequency up to 200MHz Output-to-output
SM5006 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The SM5006 series are crystal oscillator module ICs, that incorporate high-frequency, low current consumption oscillator and output buffer circuits. Highly accurate
PCI-EXPRESS CLOCK SOURCE. Features
DATASHEET ICS557-01 Description The ICS557-01 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 100 MHz in a small 8-pin SOIC package.
74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs
74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL)
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL) Description: The NTE980 CMOS Micropower Phase Locked Loop (PLL) consists of a low power, linear voltage controlled oscillator (VCO) and
USB1T20 Universal Serial Bus Transceiver
Features Complies with Universal Serial Bus Specification 2.0 for FS/LS Applications Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed (FS) and 1.5Mbit/s
NJU7119 LOW POWER SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR GENERAL DESCRIPTION The NJU79 is super small-sized package single C-MOS comparator with open drain output. The operating voltage is from.8v to.v. The
Recommended crystal unit/ resonator. Fundamental, Fundamental, 3rd overtone, SAW. 80 to A1N No 2.5. SAW 110 to B1N
2.5V LVDS Output Oscillator ICs OVERVIEW The 5037 series are 2.5V operation, LVDS output oscillator ICs. They support 80MHz to 400MHz 3rd overtone oscillation and 80MHz to 600MHz fundamental oscillation.
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier GENERAL DESCRIPTION PACKAGE OUTLE The NJU8789 is a monaural BTL output switching driver for class D amplifier including Separated Power
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
USB1T11A Universal Serial Bus Transceiver
Features Complies with Universal Serial Bus Specification 1.1 Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed and 1.5Mbit/s Low Speed Serial Data
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
NJU6549. STATIC 1/3 1/4 1/8 1/9 Segment type LCD Driver. Preliminary NJU6549
STATIC 1/3 1/4 1/8 1/9 Segment type LCD Driver GENERAL DESCRIPTION The NJU6549 is a STATIC or 1/3, 1/4, 1/8, 1/9 duty segment type LCD driver. It incorporates 9 common driver circuits and 200 segment driver
CGS3321 CGS3322 CMOS Crystal Clock Generators
CGS3321 CGS3322 CMOS Crystal Clock Generators General Description The CGS3321 and CGS3322 devices are designed for Clock Generation and Support (CGS) applications up to 110 MHz. The CGS332x series of devices
FST Bit Bus Switch
Features 4 Ω Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low I CC Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level Description December 2012
CLASS D AMPLIFIER FOR DIGITAL AUDIO ! PACKAGE OUTLINE ! PIN CONFIGURATION V DD STBY TEST MUTE V DDL OUT LP V SSL OUT LN RST V SS
PRELIMINARY CLASS D AMPLIFIER FOR DIGITAL AUDIO! GENERAL DESCRIPTION The NJU8725 is an 800mW-output class D Amplifier featuring 6 th Σ modulation. It includes Digital Attenuator, Mute, and De-emphasis
General Purpose Clock Synthesizer
1CY 290 7 fax id: 3521 CY2907 General Purpose Clock Synthesizer Features Highly configurable single PLL clock synthesizer provides all clocking requirements for numerous applications Compatible with all
NJU6051. White LED Driver with Automatic Dimming Control PRELIMINARY ! PACKAGE OUTLINE
White LED Driver with Automatic Dimming Control NJU6051 PRELIMINARY! GENERAL DESCRIPTION The NJU6051 is a white LED driver with an automatic dimming control. It contains an output driver, a PWM controller,
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
NJM271 ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM271 is an ultra high speed hex operational amplifier. It can swings 26V/µs high slew rate and 1GHz gain band width product(1mhz
UNISONIC TECHNOLOGIES CO., LTD CD4069
UNISONIC TECHNOLOGIES CO., LTD CD4069 INVERTER CIRCUITS DESCRIPTION The UTC CD4069 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve wide power supply operating
ICS PCI-EXPRESS CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS557-0 Description The ICS557-0 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 00 MHz in a small 8-pin SOIC package.
LOW VOLTAGE AUDIO POWER AMPLIFIER
LOW VOLTAGE AUDIO POWER AMPLIFIER NJM19 GENERAL DESCRPTION The NJM19 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential
Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
MONOLITHIC GATED DELAY LINE OSCILLATOR (SERIES 3D7702)
MONOLITHIC GATED DELAY LINE OSCILLATOR (SERIES 3D7702) FEATURES All-silicon, low-power CMOS technology TTL/CMOS compatible inputs and outputs Vapor phase, IR and wave solderable Auto-insertable (DIP pkg.)
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM2742 is a high speed single supply operational amplifier.the low V OL enables to treat small output signal on a single supply.
74AC573 74ACT573 Octal Latch with 3-STATE Outputs
74AC573 74ACT573 Octal Latch with 3-STATE Outputs General Description The 74AC573 and 74ACT573 are high-speed octal latches with buffered common Latch Enable (LE) and buffered common Output Enable (OE)
FSTD Bit Bus Switch with Level Shifting
FSTD16861 20-Bit Bus Switch with Level Shifting General Description The Fairchild Switch FSTD16861 provides 20-bits of highspeed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows
HD44105D. (Dot Matrix Liquid Crystal Graphic Display Common Driver) Description. Features. Ordering Information
(Dot atrix Liquid Crystal Graphic Display Common Driver) Description The HD44105 is a common signal driver for LCD dot matrix graphic display systems. It generates the timing signals required for display
74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs
74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs General Description The AC/ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and
74ABT373 Octal Transparent Latch with 3-STATE Outputs
Octal Traparent Latch with 3-STATE Outputs General Description The ABT373 coists of eight latches with 3-STATE outputs for bus organized system applicatio. The flip-flops appear traparent to the data when
74ABT Bit Transceiver with 3-STATE Outputs
74ABT16245 16-Bit Traceiver with 3-STATE Outputs General Description The ABT16245 contai sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applicatio. The
64CH COMMON DRIVER FOR DOT MATRIX LCD INTRODUCTION FEATURES 100 QFP-1420C
INTRODUCTION The is an LCD driver LSI with 64 channel outputs for dot matrix liquid crystal graphic display systems. This device provides 64 shift registers and 64 output drivers. It generates the timing
PI6C49X0208. High Performance 1:8 Multi-Voltage CMOS Buffer
Features 8 single-ended outputs Fanout Buffer Up to 200MHz output frequency Ultra low output additive jitter = 0.01ps (typ.) Selectable reference inputs support Xtal (10~50MHz), singleended and differential
74ABT244 Octal Buffer/Line Driver with 3-STATE Outputs
Octal Buffer/Line Driver with 3-STATE Outputs General Description The ABT244 is an octal buffer and line driver with 3-STATE outputs designed to be employed as a memory and address driver, clock driver,
Low Noise, High-Speed Dual Operational Amplifier. Vni = 3nV/ Hz typ. (at f=10khz) ft = 90MHz typ. (at V + /V - = ±2.5V)
Low Noise, High-Speed Dual Operational Amplifier NJM2719 GENERAL DESCRIPTION The NJM2719 is a high speed voltage feedback dual operational amplifier specifically optimized for low voltage noise. Combining
5053 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The 553 series are miniature crystal oscillator module ICs supported 8MHz to 17MHz fundamental oscillation mode. The Oscillator circuit stage has voltage regulator
74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs
Octal Buffer/Line Driver with 3-STATE Outputs General Description The AC/ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus-oriented tramitter/receiver
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
The CYF115 transmitter solution is ideal for industrial and consumer applications where simplicity and form factor are important.
CYF115 Datasheet 300M-450MHz RF Transmitter General Description The CYF115 is a high performance, easy to use, single chip ASK Transmitter IC for remote wireless applications in the 300 to 450MHz frequency
FST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
HD61103A. (Dot Matrix Liquid Crystal Graphic Display 64-Channel Common Driver) Features. Description. Ordering Information
(Dot Matrix Liquid Crystal Graphic Display 64-Channel Common Driver) Description The is a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals (switch
NJM2783. Preliminary. Monaural Microphone Amplifier with ALC
Preliminary NJM2783 Monaural Microphone Amplifier with ALC GENERAL DESCRIPTION The NJM2783 is a monaural microphone amplifier with auto level control function to avoid distortion due to clipping. The voltage
HT9170 Series Tone Receiver
Tone Receiver Features Operating voltage: 2.5V~5.5V Minimal external components No external filter is required Low standby current (Power-down mode) General Description The HT9170 series are Dual Tone
74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs
Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General Description The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing
USB1T11A Universal Serial Bus Transceiver
Universal Serial Bus Transceiver General Description The USB1T11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical
MEDIUM POWER AMPLIFIER GaAs MMIC
MEDIUM POWER AMPLIFIER GaAs MMIC GENERAL DESCRIPTION NJG132V is a GaAs MMIC designed mainly for the final stage power amplifier of Japanese PHS handset, but suitable digital wireless phone and wireless
PO3B10A. Truth Table. High Bandwidth Potato Chip. 2-Channel, 2:1 Mux/DeMux Switch w/ Single Enable GND V DD GND SEL
PO3B0A www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 3.5Gbps or.75ghz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally
74ABT245 Octal Bi-Directional Transceiver with 3-STATE Outputs
September 1991 Revised November 1999 74ABT245 Octal Bi-Directional Transceiver with 3-STATE Outputs General Description The ABT245 contains eight non-inverting bidirectional buffers with 3-STATE outputs
Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.