3rd. Over Tone Quartz Crystal Oscillator
|
|
|
- Stephanie Clark
- 5 years ago
- Views:
Transcription
1 3rd. Over Tone Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6377 series is a C-MOS 3rd. over tone quartz crystal oscillator that consists of an oscillation amplifier and 3-state output buffer. The type number is classified in six versions by their oscillation capacitors mentioned in the line-up table. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible. PACKAGE OUTLINE NJU6377XC-X FEATURES Operating Voltage 2.2 to 5.5V Oscillation Range (See Line-up Table) Low Operating High Fan-out I OH /I OL =4mA@2.5V I OH /I OL =5mA@3.0V I OH /I OL =8mA@5.0V Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation Capacitors Cg and Cg on-chip Package Outline C-MOS Technology Thin-Die/Wafer PAD LOCATION Thin-Die LINE-UP TABLE Type No. NJU6377 Recommended Oscillation Output Cg/Cd E 30 to 40 MHz 4.5kΩ 18/18pF F 40 to 50 MHz 3.1kΩ 16/16pF G 50 to 60 MHz 3.9kΩ 11/11pF f H 60 to 75 MHz 0 3.1kΩ 10/10pF J 45 to 55 MHz 3.9kΩ 14/14pF K 40 to 50 MHz 3.9kΩ 14/16pF COORDINATES No Pad Name X Y Note1) The oscillation frequency range has used NJRC s Starting Point:Die Center Unit[um] characteristics authentication crystal for measurement. Die Size:0.7x0.75mm However is not guaranteed. Thin-Die Thickness(C-D): um Thin-Die Thickness(C-L): um Wafer Thickness(W-H): 200±20um Wafer Thickness(W-L): 140±10um Pad Size: 90x90um Die Substrate: Level BLOCK DIAGRAM VDD VSS Cg Cd 3 STATE BUFFER 2017/05/02 ( 1 / 6 )
2 TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control H or OPEN Output frequency f 0 Note2) L Oscillation Stop and High impedance Output Quartz Crystal Connecting Terminals =0V Output =2.5V/3.0V/5.0V Note2) Refer to the line-up table. ABSOLUTE MAXIMUM RATINGS (Ta=25 C) PARAMETER SYMBOL RATING UNIT Supply Voltage -0.5 to +7.0 V Input Voltage V IN -0.5 to +0.5 V Output Voltage V O -0.5 to +0.5 V Input I IN 10 ma Output I O 25 ma Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note3) If the supply voltage( ) is less than 7.0V, the input voltage must not over the level though 7.0V is limit specified. Note4) Decupling capacitor should be connected between and due to the stabilized operation for the circuit. ELECTRICAL CHARACTERISTICS (Ta=25 C) Operating Voltage V E version, Note5) MHz F version, Note5) MHz Recommended G version, Note5) MHz f Oscillation H version, Note5) MHz J version, Note5) MHz K version, Note5) MHz Note5) The oscillation frequency range has used NJRC s characteristics authentication crystal for measurement. However is not guaranteed. 2017/05/02 ( 2 / 6 )
3 ( =2.5V,Ta=25 C) E version,fosc=40mhz,c L =15pF 6 F version,fosc=50mhz,c L =15pF 9 Operating I DD G version,fosc=60mhz,c L =15pF 9 H version,fosc=75mhz,c L =15pF 10 ma J version,fosc=55mhz,c L =15pF 9 K version,fosc=50mhz,c L =15pF 9 Oscillation Stopping I STB =, No load 2 5 ua Stand-by Ist ==, No load Note4) 1 ua Input Voltage Output Input 3-state Off Leakage Feedback Resistance Internal Capacitor Maximum Oscillation V IH V V IL V I OH V OH =2.7V 4 ma I OL V OL =0.3V 4 ma I IN = ua = ua I OZ =, = or 0.1 ua Cg/Cd F MAX E version 4.5 F version 3.1 G version 3.9 H version 3.1 J version 3.9 K version 3.9 E version,fosc=40mhz 18/18 F version,fosc=50mhz 16/16 G version,fosc=60mhz 11/11 H version,fosc=75mhz 10/10 J version,fosc=55mhz 14/14 K version,fosc=50mhz 14/16 E version 40 F version 50 G version 60 H version 75 J version 55 K version 50 Output Signal Symmetry SYM C L / % Output Signal Rise tr C L =15pF,10% to 90% 3 6 ns Output Signal Fall tf C L =15pF,90% to 10% 3 6 ns Output Disable time t PLZ C L =15pF,R UP =10kΩ 200 ns Output Enable t PZL C L =15pF,R UP =10kΩ 200 ns Note6) Excluding input current on Terminal. kω pf MHz 2017/05/02 ( 3 / 6 )
4 ( =3.0V,Ta=25 C) E version,fosc=40mhz,c L =15pF 8 F version,fosc=50mhz,c L =15pF 10 Operating I DD G version,fosc=60mhz,c L =15pF 11 H version,fosc=75mhz,c L =15pF 12 ma J version,fosc=55mhz,c L =15pF 11 K version,fosc=50mhz,c L =15pF 11 Oscillation Stopping I STB =, No load 2 5 ua Stand-by Ist ==, No load Note4) 1 ua Input Voltage Output Input 3-state Off Leakage Feedback Resistance Internal Capacitor Maximum Oscillation V IH V V IL V I OH V OH =2.7V 5 ma I OL V OL =0.3V 5 ma I IN = ua = ua I OZ =, = or 0.1 ua Cg/Cd F MAX E version 4.5 F version 3.1 G version 3.9 H version 3.1 J version 3.9 K version 3.9 E version,fosc=40mhz 18/18 F version,fosc=50mhz 16/16 G version,fosc=60mhz 11/11 H version,fosc=75mhz 10/10 J version,fosc=55mhz 14/14 K version,fosc=50mhz 14/16 E version 40 F version 50 G version 60 H version 75 J version 55 K version 50 Output Signal Symmetry SYM C L / % Output Signal Rise tr C L =15pF,10% to 90% ns Output Signal Fall tf C L =15pF,90% to 10% ns Output Disable time t PLZ C L =15pF,R UP =10kΩ 150 ns Output Enable t PZL C L =15pF,R UP =10kΩ 150 ns Note6) Excluding input current on Terminal. kω pf MHz 2017/05/02 ( 4 / 6 )
5 ( =5.0V,Ta=25 C) E version,fosc=40mhz,c L =15pF 22 F version,fosc=50mhz,c L =15pF 25 Operating I DD G version,fosc=60mhz,c L =15pF 32 H version,fosc=75mhz,c L =15pF 34 ma J version,fosc=55mhz,c L =15pF 30 K version,fosc=50mhz,c L =15pF 32 Oscillation Stopping I STB =, No load 5 10 ua Stand-by Ist ==, No load Note4) 1 ua Input Voltage Output Input 3-state Off Leakage Feedback Resistance Internal Capacitor Maximum Oscillation V IH V V IL V I OH V OH =4.5V 8 ma I OL V OL =0.5V 8 ma I IN = ua = ua I OZ =, = or 0.1 ua Cg/Cd F MAX E version 4.5 F version 3.1 G version 3.9 H version 3.1 J version 3.9 K version 3.9 E version,fosc=40mhz 18/18 F version,fosc=50mhz 16/16 G version,fosc=60mhz 11/11 H version,fosc=75mhz 10/10 J version,fosc=55mhz 14/14 K version,fosc=50mhz 14/16 E version 40 F version 50 G version 60 H version 75 J version 55 K version 50 Output Signal Symmetry SYM C L / % Output Signal Rise tr C L =15pF,10% to 90% 2 4 ns Output Signal Fall tf C L =15pF,90% to 10% 2 4 ns Output Disable time t PLZ C L =15pF,R UP =10kΩ 100 ns Output Enable t PZL C L =15pF,R UP =10kΩ 100 ns Note6) Excluding input current on Terminal. kω pf MHz 2017/05/02 ( 5 / 6 )
6 MEASUREMENT CIRCUITS (1)Output Signal Symmetry(C L =15pF) Pulse Generator 1000pF 50Ω C L=15pF H L 1/2 (2)Output Signal Rise/Fall (C L =15pF) Pulse Generator 1000pF 50Ω C L=15pF 90% 50% 10% tr tf (3)Output Disable/Enable (C L =15pF,R UP =10kΩ) R UP=10kΩ Pulse Generator 50Ω C L=15pF t PLZ V OL V OH t PZL [CAUTION] The specifications on this data book are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2017/05/02 ( 6 / 6 )
Low Operating Current Fundamental Quartz Crystal Oscillator IC
Low Operating Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU66 series is a C-MOS IC for fundamental quartz crystal oscillator that consists of an oscillation amplifier, -stage divider
High Drive Fundamental Quartz Crystal Oscillator
PRELIMINARY High Drive Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6360 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider
1.5V Operation Fundamental Quartz Crystal Oscillator
1.5 Operation Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6369 series is a C-MOS IC for fundamental quartz crystal oscillator that coists of an oscillation amplifier, 5-stage divider
Small Sized Quartz Crystal Oscillator. PAD LOCATION/PIN CONFIGURATION Thin-Chip
Small Sized Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6366 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output
High Drive Fundamental Quartz Crystal Oscillator
High Drive Fundamental Quartz Crystal Oscillator NJU6368 Series PRELIMINARY GENERAL DESCRIPTION The NJU6368 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier,
NJU6395 Series QUARTZ CRYSTAL OSCILLATOR
QUARTZ CRYSTAL OSCILLATOR NJU6395 Series GENERAL DESCRIPTION The NJU6395 series is up to 125MHz low-voltage C-MOS quartz crystal oscillator, the NJU6395A is up to 110MHz and the NJU6395B is up to 125MHz.
Quartz Crystal Oscillator IC with Selectable Divider
Quartz Crystal Oscillator IC with Selectable Divider GENERAL DESCRIPTION The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz. The oscillation amplifier incorporates feedback resistor and
NJU6366 Series. Small Sized Quartz Crystal Oscillator PACKAGE OUTLINE
Small Sized Quartz rystal Oscillator GENERAL DESRIPTION The NJU6366 series is a -MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer.
32.768kHz output Tuning fork Quartz Crystal Oscillator IC
32.768kHz output Tuning fork Quartz Crystal Oscillator IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU6229 is a CMOS oscillator IC which is designed for 32.768kHz tuning fork quartz unit. The NJU6229 is
(V DD =1.62 to 3.63V, V SS =0V, Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT x1 version (f 0 ) No load V DD =1.8V
Low phase noise Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU6222 series is a C-MOS quartz crystal oscillator IC (20MHz to 50MHz) realized very low phase noise. It is consisted of
SERIAL I/O REAL TIME CLOCK
SERIAL REAL TIME CLOCK GENERAL DESCRIPTION The NJU6355 series is a serial real time clock suitable for 4 bits microprocessor. It contains quartz crystal oscillator, counter, shift register, voltage regulator,
NJU BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3715 is a 16-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as
Low Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
CF5073 series VCXO Module ICs with Built-in Varicap
XO Module ICs with Built-in Varicap OVERVIEW The CF5073 series are XO ICs with built-in varicap diode. They use a recently developed negative-resistance switching oscillation circuit, at oscillation startup
NJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
NJU3712A 8-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712A is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3714A 12-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
12-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3714A is a 12-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
APPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
NJU3716A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport
SIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
NJU7108 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR NJU78 GENERAL DESCRIPTION The NJU78 is a super small-sized package single C-MOS comparator with push pull output. The operating
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
20-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3718 is a 20-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
NJU3719A 24-BIT SERIAL TO PARALLEL CONVERTER ! PACKAGE OUTLINE ! GENERAL DESCRIPTION ! PIN CONFIGURATION ! FEATURES !
24-BIT SERIAL TO PARALLEL CONVERTER! GENERAL DESCRIPTION The NJU3719A is a 24-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
CF5008A1 2. VCXO Module IC OVERVIEW FEATURES SERIES CONFIGURATION ORDERING INFORMATION
NIPPON PRECISION CIRCUITS INC. CF5008A1 VCXO Module IC OVERVIEW The CF5008A1 is a VCXO module IC that employs a circuit structure with low parasitic capacitance effects and a wide frequency range. Built-in
NJU6385. Low phase noise Fundamental Quartz Crystal Oscillator IC.
Low phase noise Fundamental Quartz Crystal Oscillator IC FETURES( =3.3V, f 0 =49.152MHz, Ta=25 C) Phase noise -103dBc/Hz(Typ.) @10Hz Offset -163dBc/Hz(Typ.) @1kHz Offset RMS Jitter 0.05psec(Typ.) @12kHz
Product Data Sheet XO5629 series Ultra-low Power KHz Crystal Oscillator IC. Features. Application. Ordering Information.
Features Wide range of operating supply voltage: 1.6V to 5.5V Low crystal drive current oscillation for miniature crystal units Ulta-Low power consumption(25ua/1.8v ) XO5629A/B series: for Wire Bonding
Product Data Sheet XO5029 series KHz Crystal Oscillorator IC. Features. Application. Ordering Information. Description.
Features Wide range of operating supply voltage: 1.5V to 5.5V Low crystal drive current oscillation for miniature crystal units Low power consumption(0.18ma/1.8v) XO5029Bx series: for Wire Bonding (type
IPS009 series IC CMOS SPXO
IPS009 series IC CMOS SPXO Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application
NJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
IPS009 series IC CMOS SPXO
IPS009 series IC Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application to the
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712 is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 4.5V to 5.5V. The effective
XC2163 Series GENERAL DESCRIPTION APPLICATIONS FEATURES PIN ASSIGNMENT PIN CONFIGURATION /INH, Q0 PIN FUNCTION
ETR1403_001a ICs for use with 3rd Overtone Crystal Oscillators GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
ICS2510C. 3.3V Phase-Lock Loop Clock Driver. Integrated Circuit Systems, Inc. General Description. Pin Configuration.
Integrated Circuit Systems, Inc. ICS250C 3.3V Phase-Lock Loop Clock Driver General Description The ICS250C is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology
Piezo-sounder Driver with Multi-mode charge pump. C 2 =0.1uF. C 1 =0.1uF CP1 CN1 CP2 CN2. Charge Pump (1x / 2x / 3x) Control Logic
Piezo-sounder Driver with Multi-mode charge pump NJU72501 GENERAL DESCRIPTION The NJU72501 is a switching driver with multi mode charge pump for piezo-sounder. It can drive outputs up to 18pp from 3 supply.
74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs
74ALVC162245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs General Description The ALVC162245 contains sixteen non-inverting
Recommended crystal unit/ resonator. 5036G 80 to A1 5036A2 3rd overtone, 5036B 2. Fundamental,
2.5V LV-PECL Output Oscillator ICs OVERVIEW The 5036 series are 2.5V operation, differential LV-PECL output oscillator ICs. They support 50MHz to 400MHz 3rd overtone oscillation and 50MHz to 600MHz fundamental
Single-phase DC Brushless Motor Driver IC *MEET JEDEC MO-187-DA / THIN TYPE. PIN No. PIN NAME 1 OUTB 2 VDD 3 IN+ 4 IN- 5 FG 6 PWM 7 OUTA 8 GND + -
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION The is a single-phase motor driver IC. It features lock detect, FG output and thermal shutdown circuit functions. The motor rotational speed
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier GENERAL DESCRIPTION PACKAGE OUTLE The NJU8789 is a monaural BTL output switching driver for class D amplifier including Separated Power
Recommended crystal unit/ resonator. Fundamental, Fundamental, 3rd overtone, SAW. 80 to A1N No 2.5. SAW 110 to B1N
2.5V LVDS Output Oscillator ICs OVERVIEW The 5037 series are 2.5V operation, LVDS output oscillator ICs. They support 80MHz to 400MHz 3rd overtone oscillation and 80MHz to 600MHz fundamental oscillation.
SM5006 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The SM5006 series are crystal oscillator module ICs, that incorporate high-frequency, low current consumption oscillator and output buffer circuits. Highly accurate
NJU7670 VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE
VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE The is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double
Chapter 6 DIFFERENT TYPES OF LOGIC GATES
Chapter 6 DIFFERENT TYPES OF LOGIC GATES Lesson 8 NMOS gates Ch06L8-"Digital Principles and Design", Raj Kamal, Pearson Education, 2006 2 Outline NMOS (n-channel based MOSFETs based circuit) NMOS Features
NJU7670V VOLTAGE TRIPLER PRELIMINARY
VOLTAGE TRIPLER GENERAL DESCRIPTION The NJU7670 is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double negative
2.5V, 3.3V LVCMOS 1:18 Clock Fanout Buffer
2.5V, 3.3V LVCMOS 1:18 Clock Fanout Buffer Features 18 LVCMOS outputs enable to drive up to 36 clock lines LVCMOS/LVTTL input 2.5V or 3.3V power supply Clock output frequency up to 200MHz Output-to-output
NJU7385. Dual H-bridge Driver for actuator
Dual H-bridge Driver for actuator GENERAL DESCRIPTION The NJU7385 is a dual H-bridge driver IC that has general versatility for a compact actuator. The Mode Select Function in the control part can select
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL)
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL) Description: The NTE980 CMOS Micropower Phase Locked Loop (PLL) consists of a low power, linear voltage controlled oscillator (VCO) and
1/3, 1/4 Duty LCD Driver
1/3, 1/4 Duty LCD Driver GENERAL DESCRIPTION NJU6533 is a 1/3 or 1/4 duty segment type LCD driver. It incorporates 4 common driver circuits and 32 segment driver circuits. NJU6533 can drive maximum 96
PT7C4502 PLL Clock Multiplier
Features Low cost frequency multiplier Zero ppm multiplication error Input crystal frequency of 5-30 MHz Input clock frequency of 4-50 MHz Output clock frequencies up to 180 MHz Period jitter 50ps (100~180MHz)
5056 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The 556 series are 7 to 135MHz oscillation frequency, crystal oscillator module ICs optimized for 3rd overtone crystal elements with C 2 to 4pF. They have built-in
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
NJU7119 LOW POWER SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR GENERAL DESCRIPTION The NJU79 is super small-sized package single C-MOS comparator with open drain output. The operating voltage is from.8v to.v. The
5076 series VCXO Module IC with Built-in Varicap
XO Module IC with Built-in Varicap OVERVIEW The 576 series are miniature XO ICs that provide a wide frequency pulling range, even when using miniature crystal units for which a wide pulling range is difficult
5075 series VCXO Module IC with Built-in Varicap
XO Module IC with Built-in Varicap OVERVIEW The 575 series are miniature XO ICs that provide a wide frequency pulling range, even when using miniature crystal units for which a wide pulling range is difficult
Low Noise, High-Speed Dual Operational Amplifier. Vni = 3nV/ Hz typ. (at f=10khz) ft = 90MHz typ. (at V + /V - = ±2.5V)
Low Noise, High-Speed Dual Operational Amplifier NJM2719 GENERAL DESCRIPTION The NJM2719 is a high speed voltage feedback dual operational amplifier specifically optimized for low voltage noise. Combining
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
PCI-EXPRESS CLOCK SOURCE. Features
DATASHEET ICS557-01 Description The ICS557-01 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 100 MHz in a small 8-pin SOIC package.
5061H series LVDS Output Oscillator ICs
OVERVIEW 561H series LVDS Output Oscillator ICs The 561H series are LVDS output oscillator ICs that support a wide output frequency range ideal for high-frequency applications typical in high-speed communications
CLASS D AMPLIFIER FOR DIGITAL AUDIO ! PACKAGE OUTLINE ! PIN CONFIGURATION V DD STBY TEST MUTE V DDL OUT LP V SSL OUT LN RST V SS
PRELIMINARY CLASS D AMPLIFIER FOR DIGITAL AUDIO! GENERAL DESCRIPTION The NJU8725 is an 800mW-output class D Amplifier featuring 6 th Σ modulation. It includes Digital Attenuator, Mute, and De-emphasis
74ABT245 Octal Bi-Directional Transceiver with 3-STATE Outputs
September 1991 Revised November 1999 74ABT245 Octal Bi-Directional Transceiver with 3-STATE Outputs General Description The ABT245 contains eight non-inverting bidirectional buffers with 3-STATE outputs
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
CF5074B VCXO Module IC with Built-in Varicap
XO Module IC with Built-in Varicap OVERVIEW The CF574B is XO module IC with built-in varicap diodes. The integrated varicap diode BiCMOS process allows the device to be fabricated on a single chip. newly
FST Bit Bus Switch
Features 4 Ω Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low I CC Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level Description December 2012
5053 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The 553 series are miniature crystal oscillator module ICs supported 8MHz to 17MHz fundamental oscillation mode. The Oscillator circuit stage has voltage regulator
ICS502 LOCO PLL CLOCK MULTIPLIER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS502 Description The ICS502 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The
C-MOS STEP-UP SWITCHING REGULATOR EQUIVALENT CIRCUIT
C-MOS STEP-UP SWITCHING REGULATOR GENERAL DESCRIPTION The NJU7262 series is a C-MOS step-up switching regulator which contains accurate voltage reference, error amplifier, CR oscillator, control circuit,
QUAD PIN ELECTRONICS DRIVER
QUAD PIN ELECTRONICS DRIVER GENERAL DESCRIPTION The NJU6495 is a quad pin driver fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, flash
5059H series 32kHz output Crystal Oscillator Module ICs
32kHz output Crystal Oscillator Module ICs OVERVIEW The 5059H series are 32.768kHz output and 125 C operation crystal oscillator module ICs with divide-by-512 (or divide-by-1024) frequency, AT-cut crystal
NJU6549. STATIC 1/3 1/4 1/8 1/9 Segment type LCD Driver. Preliminary NJU6549
STATIC 1/3 1/4 1/8 1/9 Segment type LCD Driver GENERAL DESCRIPTION The NJU6549 is a STATIC or 1/3, 1/4, 1/8, 1/9 duty segment type LCD driver. It incorporates 9 common driver circuits and 200 segment driver
74ABT244 Octal Buffer/Line Driver with 3-STATE Outputs
Octal Buffer/Line Driver with 3-STATE Outputs General Description The ABT244 is an octal buffer and line driver with 3-STATE outputs designed to be employed as a memory and address driver, clock driver,
LOCO PLL CLOCK MULTIPLIER. Features
DATASHEET ICS501A Description The ICS501A LOCO TM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands
74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs
Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General Description The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
ICS511 LOCO PLL CLOCK MULTIPLIER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS511 Description The ICS511 LOCO TM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LT 8-STAGE SHIFT & STORE BUS REGISTER ESCRIPTION The U74HC4094 consists of an 8-stage shift register and an 8-stage -type latch with 3-stage parallel outputs. ata is shifted
USB1T20 Universal Serial Bus Transceiver
Features Complies with Universal Serial Bus Specification 2.0 for FS/LS Applications Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed (FS) and 1.5Mbit/s
Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
74V1T126CTR SINGLE BUS BUFFER (3-STATE)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.6ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN
54LVTH PRELIMINARY. 3.3V 16-Bit Transparent D-Type Latches. Memory DESCRIPTION: FEATURES: Logic Diagram
PRELIMINARY 1OE 1Q1 1Q2 1Q3 1Q4 VCC 1Q5 1Q6 1Q7 1Q8 2Q1 2Q2 2Q3 2Q4 VCC 2Q5 2Q6 2Q7 2Q8 2OE FEATURES: 1 48 54LVTH162373 24 25 1LE 1D1 1D2 1D3 1D4 VCC 1D5 1D6 1D7 1D8 2D1 2D2 2D3 2D4 VCC 2D5 2D6 2D7 2D8
54LVTH PRELIMINARY. 3.3V 16-Bit Transparent D-Type Latches. Memory DESCRIPTION: FEATURES: Logic Diagram
PRELIMINARY 1OE 1Q1 1Q2 1Q3 1 48 1LE 1D1 1D2 1D3 Logic Diagram (PositiveLogic) 1OE/2OE 1/24 54LVTH162373 3.3V 16-Bit Transparent D-Type Latches 1Q4 1D4 VCC 1Q5 1Q6 VCC 1D5 1D6 1LE/2LE 48/25 1Q7 1Q8 2Q1
NJU7116 SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR
SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7 is a super low operating current and low offset voltage tiny single CMOS comparator
MONOLITHIC GATED DELAY LINE OSCILLATOR (SERIES 3D7702)
MONOLITHIC GATED DELAY LINE OSCILLATOR (SERIES 3D7702) FEATURES All-silicon, low-power CMOS technology TTL/CMOS compatible inputs and outputs Vapor phase, IR and wave solderable Auto-insertable (DIP pkg.)
LOW VOLTAGE AUDIO POWER AMPLIFIER
LOW VOLTAGE AUDIO POWER AMPLIFIER NJM19 GENERAL DESCRPTION The NJM19 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential
NJM2737. Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier
Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM2737 is a Rail-to-Rail Input/Output single supply dual operational amplifier featuring low voltage operation,
NJU6051. White LED Driver with Automatic Dimming Control PRELIMINARY ! PACKAGE OUTLINE
White LED Driver with Automatic Dimming Control NJU6051 PRELIMINARY! GENERAL DESCRIPTION The NJU6051 is a white LED driver with an automatic dimming control. It contains an output driver, a PWM controller,
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
NJM271 ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM271 is an ultra high speed hex operational amplifier. It can swings 26V/µs high slew rate and 1GHz gain band width product(1mhz
USB1T11A Universal Serial Bus Transceiver
Features Complies with Universal Serial Bus Specification 1.1 Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed and 1.5Mbit/s Low Speed Serial Data
ICS PCI-EXPRESS CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS557-0 Description The ICS557-0 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 00 MHz in a small 8-pin SOIC package.
OUTPUT COUPLING CAPACITOR-LESS LOW VOLTAGE VIDEO AMPLIFIER WITH LPF
OUTPUT COUPLING CAPACITOR-LESS LOW VOLTAGE VIDEO AMPLIFIER WITH LPF GENERAL DESCRIPTION The NJU7 is a Low Voltage Video Amplifier with LPF circuit. By the internal charge pump circuit, output capacitor
FST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM2742 is a high speed single supply operational amplifier.the low V OL enables to treat small output signal on a single supply.
74ALVC16500 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs
Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs General Description The ALVC16500 is an 18-bit universal bus transceiver which combines D-type latches and D-type flip-flops
NJU7046/NJU7047/NJU7048
NJU76/NJU77/NJU7 9V/μs High-Speed, Rail-to-rail I/O CMOS Operational Amplifier FEATURES (V + =V, V - =V, Ta= C) High Slew Rate 9V/µs Wide Bandwidth MHz Low Input Bias Current pa Rail-to-Rail Input and
PI6C49X0208. High Performance 1:8 Multi-Voltage CMOS Buffer
Features 8 single-ended outputs Fanout Buffer Up to 200MHz output frequency Ultra low output additive jitter = 0.01ps (typ.) Selectable reference inputs support Xtal (10~50MHz), singleended and differential
NJM2722. Single Ultra-High speed and Wide Band Operational Amplifier
Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM2722 is a single, ultra-high speed and wide band operational amplifier that features 1V/μs slew rate and 1ohm load
CD54/74AC245, CD54/74ACT245
CD54/74AC245, CD54/74ACT245 Data sheet acquired from Harris Semiconductor SCHS245B September 1998 - Revised October 2000 Octal-Bus Transceiver, Three-State, Non-Inverting Features Description [ /Title
Single-phase DC Brushless Motor Driver IC
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7357 is single-phase DC brushless motor driver IC. And It features MOS-FET driver circuit for better output characteristics.
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt