NJU6395 Series QUARTZ CRYSTAL OSCILLATOR
|
|
|
- Aubrie Glenn
- 6 years ago
- Views:
Transcription
1 QUARTZ CRYSTAL OSCILLATOR NJU6395 Series GENERAL DESCRIPTION The NJU6395 series is up to 125MHz low-voltage C-MOS quartz crystal oscillator, the NJU6395A is up to 110MHz and the NJU6395B is up to 125MHz. The NJU6395 series consists of an oscillation amplifier, internal capacitors (Cg, Cd), feedback resistance (Rf), and 3-state output buffer. The output is 8mA at 3 and 12mA at 5 operation, which can drive C-MOS load. PAKAGE OUTLINE NJU6395XC/XCT NJU6395XE FEATURES Low Operating oltage Maximum Oscillation Frequency A: 110MHz B: 125MHz High Fan-out I OH /I OL I OH /I OL 3-State Output Buffer Oscillation Stop and Output Buffer Stand-by Function Oscillation Capacitors Cg and Cg on-chip Package Outline C-MOS Technology Chip/Thin-Chip/EMP-8 PAD LOCATION Chip/Thin-Chip EMP LINE-UP TABLE COORDINATES Type No. NJU6395 Operating oltage Range[] Recommended Oscillation Frequency[MHz] Packag e Cg/Cd [pf] A 2.7 to to 110 C/CT/E 8.5/9.5 B 2.4 to to 125 C/CT/E 8.0/9.0 No Pad Name X Y SS DD Starting Point : Chip Center Unit[um] Chip Size:1.24x0.8mm Thin-Chip Thickness:260±20um Pad Size:100x100um Note1) No.6 and No.7 are no pad. BLOCK DIAGRAM Rf DD SS Cg Cd 3-STATE BUFFER 2003/03/07 ( 1 / 5 )
2 TREMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control H or OPEN Output frequency f 0 L Oscillation Stop and High impedance Output Quartz Crystal Connecting Terminals SS SS =0 Frequency Output DD =3/5 DD ABSOLUTE MAXIMUM RATINGS (Ta=25 C) PARAMETER SYMBOL RATING UNIT Supply oltage DD -0.5 to +7.0 Input oltage IN SS -0.5 to DD +0.5 Output oltage O -0.5 to DD +0.5 Input I IN ±10 ma Output I O ±25 ma Power Dissipation P D 450(EMP-8) mw Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage( DD ) is less than 7.0, the input voltage must not over the DD level though 7.0 is limit specified. Note3) Decupling capacitor should be connected between DD and SS due to the stabilized operation for the circuit. Note4) The power dissipation is EMP-8 package without board. 2003/03/07 ( 2 / 5 )
3 ELECTRICAL CHARACTERISTICS (Ta=25 C) A version Operating oltage DD B version ( DD =3.0,Ta=25 C) Operating A: fosc=100mhz, C L =15pF ma I DD1 B: fosc=125mhz, C L =15pF Oscillation Stopping I DD2 = SS, No load 10 ua Stand-by Ist == SS, No load Note5) 1 ua Input oltage IH IL Output I OH OH =2.7 8 ma I OL OL =0.3 8 ma Input I IN =0.8 DD ua =0.2 DD ua 3-state Off Leakage I OZ = SS, = DD or SS ±0.1 ua Internal Capacitor Cg/Cd A: fosc=100mhz 8.5/9.5 B: fosc=125mhz 8.0/9.0 pf Maximum Oscillation A version 110 F Frequency MAX B version 125 MHz Output Signal Symmetry SYM C L DD / % Output Signal Rise tr C L =15pF, 10% to 90% 2 4 ns Output Signal Fall tf C L =15pF, 90% to 10% 2 4 ns Output Disable time T PLZ C L =15pF, R UP =10kΩ 100 ns Output Enable T PZL C L =15pF, R UP =10kΩ 100 ns Note5) Excluding input current on Terminal. 2003/03/07 ( 3 / 5 )
4 ( DD =5.0,Ta=25 C, Only A version) Operating I DD1 fosc=100mhz, C L =15pF ma Oscillation Stopping I DD2 = SS, No load 10 ua Stand-by Ist == SS, No load Note5) 1 ua Input oltage IH IL Output I OH OH = ma I OL OL = ma Input I IN =0.8 DD ua =0.2 DD ua 3-state Off Leakage I OZ = SS, = DD or SS ±0.1 ua Internal Capacitor Cg/Cd fosc=100mhz 8.5/9.5 pf Maximum Oscillation Frequency F MAX 110 MHz Output Signal Symmetry SYM C L DD / % Output Signal Rise tr C L =15pF, 10% to 90% 2 4 ns Output Signal Fall tf C L =15pF, 90% to 10% 2 4 ns Output Disable time T PLZ C L =15pF, R UP =10kΩ 100 ns Output Enable T PZL C L =15pF, R UP =10kΩ 100 ns Note5) Excluding input current on Terminal. 2003/03/07 ( 4 / 5 )
5 MEASURMENT CIRCUITS (1)Output Signal Symmetry (C L =15pF) DD 1/2DD SS H L (2)Output Signal Rise/Fall (C L =15pF) DD SS tr2 90% 50% 10% tf2 (3)Output Disable/Enable (C L =15pF,R UP =10kΩ) R UP=10kΩ DD 0.2 DD 0.8 DD T PZL SS T PLZ OL OH [CAUTION] The specifications on this data book are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2003/03/07 ( 5 / 5 )
1.5V Operation Fundamental Quartz Crystal Oscillator
1.5 Operation Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6369 series is a C-MOS IC for fundamental quartz crystal oscillator that coists of an oscillation amplifier, 5-stage divider
High Drive Fundamental Quartz Crystal Oscillator
High Drive Fundamental Quartz Crystal Oscillator NJU6368 Series PRELIMINARY GENERAL DESCRIPTION The NJU6368 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier,
Low Operating Current Fundamental Quartz Crystal Oscillator IC
Low Operating Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU66 series is a C-MOS IC for fundamental quartz crystal oscillator that consists of an oscillation amplifier, -stage divider
High Drive Fundamental Quartz Crystal Oscillator
PRELIMINARY High Drive Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6360 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider
Small Sized Quartz Crystal Oscillator. PAD LOCATION/PIN CONFIGURATION Thin-Chip
Small Sized Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6366 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output
3rd. Over Tone Quartz Crystal Oscillator
3rd. Over Tone Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6377 series is a C-MOS 3rd. over tone quartz crystal oscillator that consists of an oscillation amplifier and 3-state output buffer.
Quartz Crystal Oscillator IC with Selectable Divider
Quartz Crystal Oscillator IC with Selectable Divider GENERAL DESCRIPTION The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz. The oscillation amplifier incorporates feedback resistor and
NJU6366 Series. Small Sized Quartz Crystal Oscillator PACKAGE OUTLINE
Small Sized Quartz rystal Oscillator GENERAL DESRIPTION The NJU6366 series is a -MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer.
32.768kHz output Tuning fork Quartz Crystal Oscillator IC
32.768kHz output Tuning fork Quartz Crystal Oscillator IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU6229 is a CMOS oscillator IC which is designed for 32.768kHz tuning fork quartz unit. The NJU6229 is
SERIAL I/O REAL TIME CLOCK
SERIAL REAL TIME CLOCK GENERAL DESCRIPTION The NJU6355 series is a serial real time clock suitable for 4 bits microprocessor. It contains quartz crystal oscillator, counter, shift register, voltage regulator,
(V DD =1.62 to 3.63V, V SS =0V, Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT x1 version (f 0 ) No load V DD =1.8V
Low phase noise Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU6222 series is a C-MOS quartz crystal oscillator IC (20MHz to 50MHz) realized very low phase noise. It is consisted of
NJU BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3715 is a 16-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
NJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
NJU3712A 8-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712A is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3714A 12-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
12-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3714A is a 12-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU3716A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport
NJU3719A 24-BIT SERIAL TO PARALLEL CONVERTER ! PACKAGE OUTLINE ! GENERAL DESCRIPTION ! PIN CONFIGURATION ! FEATURES !
24-BIT SERIAL TO PARALLEL CONVERTER! GENERAL DESCRIPTION The NJU3719A is a 24-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
20-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3718 is a 20-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
SIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
APPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
Low Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
NJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712 is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 4.5V to 5.5V. The effective
CF5073 series VCXO Module ICs with Built-in Varicap
XO Module ICs with Built-in Varicap OVERVIEW The CF5073 series are XO ICs with built-in varicap diode. They use a recently developed negative-resistance switching oscillation circuit, at oscillation startup
CF5008A1 2. VCXO Module IC OVERVIEW FEATURES SERIES CONFIGURATION ORDERING INFORMATION
NIPPON PRECISION CIRCUITS INC. CF5008A1 VCXO Module IC OVERVIEW The CF5008A1 is a VCXO module IC that employs a circuit structure with low parasitic capacitance effects and a wide frequency range. Built-in
Piezo-sounder Driver with Multi-mode charge pump. C 2 =0.1uF. C 1 =0.1uF CP1 CN1 CP2 CN2. Charge Pump (1x / 2x / 3x) Control Logic
Piezo-sounder Driver with Multi-mode charge pump NJU72501 GENERAL DESCRIPTION The NJU72501 is a switching driver with multi mode charge pump for piezo-sounder. It can drive outputs up to 18pp from 3 supply.
High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
NJU7108 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR NJU78 GENERAL DESCRIPTION The NJU78 is a super small-sized package single C-MOS comparator with push pull output. The operating
NJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
Low Noise, High-Speed Dual Operational Amplifier. Vni = 3nV/ Hz typ. (at f=10khz) ft = 90MHz typ. (at V + /V - = ±2.5V)
Low Noise, High-Speed Dual Operational Amplifier NJM2719 GENERAL DESCRIPTION The NJM2719 is a high speed voltage feedback dual operational amplifier specifically optimized for low voltage noise. Combining
XC2163 Series GENERAL DESCRIPTION APPLICATIONS FEATURES PIN ASSIGNMENT PIN CONFIGURATION /INH, Q0 PIN FUNCTION
ETR1403_001a ICs for use with 3rd Overtone Crystal Oscillators GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
1/3, 1/4 Duty LCD Driver
1/3, 1/4 Duty LCD Driver GENERAL DESCRIPTION NJU6533 is a 1/3 or 1/4 duty segment type LCD driver. It incorporates 4 common driver circuits and 32 segment driver circuits. NJU6533 can drive maximum 96
NJU7670V VOLTAGE TRIPLER PRELIMINARY
VOLTAGE TRIPLER GENERAL DESCRIPTION The NJU7670 is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double negative
IPS009 series IC CMOS SPXO
IPS009 series IC CMOS SPXO Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application
IPS009 series IC CMOS SPXO
IPS009 series IC Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application to the
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier GENERAL DESCRIPTION PACKAGE OUTLE The NJU8789 is a monaural BTL output switching driver for class D amplifier including Separated Power
Single-phase DC Brushless Motor Driver IC *MEET JEDEC MO-187-DA / THIN TYPE. PIN No. PIN NAME 1 OUTB 2 VDD 3 IN+ 4 IN- 5 FG 6 PWM 7 OUTA 8 GND + -
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION The is a single-phase motor driver IC. It features lock detect, FG output and thermal shutdown circuit functions. The motor rotational speed
NJU6385. Low phase noise Fundamental Quartz Crystal Oscillator IC.
Low phase noise Fundamental Quartz Crystal Oscillator IC FETURES( =3.3V, f 0 =49.152MHz, Ta=25 C) Phase noise -103dBc/Hz(Typ.) @10Hz Offset -163dBc/Hz(Typ.) @1kHz Offset RMS Jitter 0.05psec(Typ.) @12kHz
NJU7706/07 VOLTAGE DETECTOR
OLTAGE DETECTOR GENERAL DESCRIPTION The /07 is a high precision voltage detector with a built-in delay time generator of fixed time. The /07 is useful for preventing malfunction of microprocessor or DSP
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
NJU7670 VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE
VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE The is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL)
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL) Description: The NTE980 CMOS Micropower Phase Locked Loop (PLL) consists of a low power, linear voltage controlled oscillator (VCO) and
NJM2737. Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier
Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM2737 is a Rail-to-Rail Input/Output single supply dual operational amplifier featuring low voltage operation,
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
C-MOS STEP-UP SWITCHING REGULATOR EQUIVALENT CIRCUIT
C-MOS STEP-UP SWITCHING REGULATOR GENERAL DESCRIPTION The NJU7262 series is a C-MOS step-up switching regulator which contains accurate voltage reference, error amplifier, CR oscillator, control circuit,
74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs
74ALVC162245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs General Description The ALVC162245 contains sixteen non-inverting
SM5006 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The SM5006 series are crystal oscillator module ICs, that incorporate high-frequency, low current consumption oscillator and output buffer circuits. Highly accurate
NJU7119 LOW POWER SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR GENERAL DESCRIPTION The NJU79 is super small-sized package single C-MOS comparator with open drain output. The operating voltage is from.8v to.v. The
LC7215, 7215F, 7215FM. MW/LW PLL Frequency Synthesizers. Package Dimensions. Overview. Features
Ordering number: EN 3584B Silicon-gate CMOS LSI LC7215, 7215F, 7215FM MW/LW PLL Frequency Synthesizers Overview The LC7215, LC7215F and LC7215FM are phase-locked-loop frequency synthesizer LSIs that provide
5059H series 32kHz output Crystal Oscillator Module ICs
32kHz output Crystal Oscillator Module ICs OVERVIEW The 5059H series are 32.768kHz output and 125 C operation crystal oscillator module ICs with divide-by-512 (or divide-by-1024) frequency, AT-cut crystal
NJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic olume GENERAL DESCRIPTION The NJU7 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU7 has many characteristics that are useful in audio application,
ICS2510C. 3.3V Phase-Lock Loop Clock Driver. Integrated Circuit Systems, Inc. General Description. Pin Configuration.
Integrated Circuit Systems, Inc. ICS250C 3.3V Phase-Lock Loop Clock Driver General Description The ICS250C is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology
PO3B10A. Truth Table. High Bandwidth Potato Chip. 2-Channel, 2:1 Mux/DeMux Switch w/ Single Enable GND V DD GND SEL
PO3B0A www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 3.5Gbps or.75ghz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally
5056 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The 556 series are 7 to 135MHz oscillation frequency, crystal oscillator module ICs optimized for 3rd overtone crystal elements with C 2 to 4pF. They have built-in
NJU7116 SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR
SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7 is a super low operating current and low offset voltage tiny single CMOS comparator
NJM8202. Single Supply, Rail-to-Rail Output Dual Operational Amplifier
NJM8 Single Supply, Rail-to-Rail Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM8 is a Rail-to-Rail output single supply dual operational amplifier with a low noise of nv/ Hz (typ. at khz)
CD4069, CD4069-SMD Inverter Circuits
CD4069, CD4069-SMD Inverter Circuits General Description The CD4069UB consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve wide power supply operating range,
PO3B402A. High Bandwidth Potato Chip OE1 Y1+ Y1- GND SEL3 SEL1 D3- D3+ OE2 Y2+ Y2- Y3+ M3- M3+ OE3 SEL2 OE3 Y3+ Y3- SEL3 OE4 Y4+ Y4- SEL4
FEATURES: Patented technology High signal -3db passing bandwidth at GHz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally suited for low power applications Industrial
CLASS D AMPLIFIER FOR DIGITAL AUDIO ! PACKAGE OUTLINE ! PIN CONFIGURATION V DD STBY TEST MUTE V DDL OUT LP V SSL OUT LN RST V SS
PRELIMINARY CLASS D AMPLIFIER FOR DIGITAL AUDIO! GENERAL DESCRIPTION The NJU8725 is an 800mW-output class D Amplifier featuring 6 th Σ modulation. It includes Digital Attenuator, Mute, and De-emphasis
UTC UNISONIC TECHNOLOGIES CO. LTD 1 INVERTER CIRCUITS
UTC CD469 INERTER CIRCUITS DESCRIPTION The UTC CD469 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve wide power supply operating range, low power consumption,
NJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic olume GENERAL DESCRIPTION The NJU73 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU73 has many characteristics that are useful in audio application,
7-INPUT / 3-OUTPUT DUAL ANALOG SWITCH
7-INPUT / 3-OUTPUT DUAL ANALOG SWITCH GENERAL DESCRIPTION The NJU72750A is a 7-input / 3-output dual analog switch. Functions are controlled via two-wired serial bus. A-channel switches and B-channel switches
NJM2783. Preliminary. Monaural Microphone Amplifier with ALC
Preliminary NJM2783 Monaural Microphone Amplifier with ALC GENERAL DESCRIPTION The NJM2783 is a monaural microphone amplifier with auto level control function to avoid distortion due to clipping. The voltage
Chapter 6 DIFFERENT TYPES OF LOGIC GATES
Chapter 6 DIFFERENT TYPES OF LOGIC GATES Lesson 8 NMOS gates Ch06L8-"Digital Principles and Design", Raj Kamal, Pearson Education, 2006 2 Outline NMOS (n-channel based MOSFETs based circuit) NMOS Features
Single-phase DC Brushless Motor Driver IC
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7357 is single-phase DC brushless motor driver IC. And It features MOS-FET driver circuit for better output characteristics.
NJM A High Power DC/DC Converter Controller IC
7.A High Power DC/DC Converter Controller IC GENERAL DESCRIPTION The NJM28 is a high power step down DC/DC converter IC. It incorporates 7.A power transistor, ±2% accuracy precision voltage reference,
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
NJM271 ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM271 is an ultra high speed hex operational amplifier. It can swings 26V/µs high slew rate and 1GHz gain band width product(1mhz
Recommended crystal unit/ resonator. 5036G 80 to A1 5036A2 3rd overtone, 5036B 2. Fundamental,
2.5V LV-PECL Output Oscillator ICs OVERVIEW The 5036 series are 2.5V operation, differential LV-PECL output oscillator ICs. They support 50MHz to 400MHz 3rd overtone oscillation and 50MHz to 600MHz fundamental
Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
CGS3321 CGS3322 CMOS Crystal Clock Generators
CGS3321 CGS3322 CMOS Crystal Clock Generators General Description The CGS3321 and CGS3322 devices are designed for Clock Generation and Support (CGS) applications up to 110 MHz. The CGS332x series of devices
LOW VOLTAGE AUDIO POWER AMPLIFIER
LOW VOLTAGE AUDIO POWER AMPLIFIER NJM19 GENERAL DESCRPTION The NJM19 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential
Designated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
54LVTH PRELIMINARY. 3.3V 16-Bit Transparent D-Type Latches. Memory DESCRIPTION: FEATURES: Logic Diagram
PRELIMINARY 1OE 1Q1 1Q2 1Q3 1Q4 VCC 1Q5 1Q6 1Q7 1Q8 2Q1 2Q2 2Q3 2Q4 VCC 2Q5 2Q6 2Q7 2Q8 2OE FEATURES: 1 48 54LVTH162373 24 25 1LE 1D1 1D2 1D3 1D4 VCC 1D5 1D6 1D7 1D8 2D1 2D2 2D3 2D4 VCC 2D5 2D6 2D7 2D8
54LVTH PRELIMINARY. 3.3V 16-Bit Transparent D-Type Latches. Memory DESCRIPTION: FEATURES: Logic Diagram
PRELIMINARY 1OE 1Q1 1Q2 1Q3 1 48 1LE 1D1 1D2 1D3 Logic Diagram (PositiveLogic) 1OE/2OE 1/24 54LVTH162373 3.3V 16-Bit Transparent D-Type Latches 1Q4 1D4 VCC 1Q5 1Q6 VCC 1D5 1D6 1LE/2LE 48/25 1Q7 1Q8 2Q1
5076 series VCXO Module IC with Built-in Varicap
XO Module IC with Built-in Varicap OVERVIEW The 576 series are miniature XO ICs that provide a wide frequency pulling range, even when using miniature crystal units for which a wide pulling range is difficult
CF5074B VCXO Module IC with Built-in Varicap
XO Module IC with Built-in Varicap OVERVIEW The CF574B is XO module IC with built-in varicap diodes. The integrated varicap diode BiCMOS process allows the device to be fabricated on a single chip. newly
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
NJU77000/NJU77001 NJU77002/NJU77004
.V,.23µA/ch, Ultralow Power, Rail-to-Rail Input/Output Single/Dual/Quad CMOS Operational Amplifier FEATURES (V + =V) Supply Current NJU77/NJU77.29µA typ..23µa/ch typ. Operating Voltage.V to.v Input Offset
Order Number Package Number Eco Status Package Description
FXL4TD245 Low-Voltage Dual-Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Features Bi-directional interface between
5075 series VCXO Module IC with Built-in Varicap
XO Module IC with Built-in Varicap OVERVIEW The 575 series are miniature XO ICs that provide a wide frequency pulling range, even when using miniature crystal units for which a wide pulling range is difficult
NJU Vrms Ground Referenced Stereo Line Amplifier PACKAGE OUTLINE
NJU rms Ground Referenced Stereo Line Amplifier GENERAL DESCRIPTION The NJU is an audio line Amplifier. It can swing rms (. peak-to-peak) signal at. operating voltage. Ground-referenced outputs eliminate
Recommended crystal unit/ resonator. Fundamental, Fundamental, 3rd overtone, SAW. 80 to A1N No 2.5. SAW 110 to B1N
2.5V LVDS Output Oscillator ICs OVERVIEW The 5037 series are 2.5V operation, LVDS output oscillator ICs. They support 80MHz to 400MHz 3rd overtone oscillation and 80MHz to 600MHz fundamental oscillation.
Quad 2-Input NAND Gate High-Voltage Silicon-Gate CMOS
TECHNICAL DATA Quad 2-Input NAND Gate High-oltage Silicon-Gate CMOS The NAND gates provide the system designer with direct emplementation of the NAND function. Operating oltage Range:.0 to 18 Maximum input
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Vs ±5% Vs ±5% Vs ±5%
Page 1 of 5 0.6 RMS Phase Jitter over 12 khz to 20 MHz bandwidth 31 Standard frequencies from 25 MHz to 212.5 MHz LPECL and LDS Output types SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER
Phase-Locked Loop High-Performance Silicon-Gate CMOS
TECHNICAL DATA Phase-Locked Loop High-Performance Silicon-Gate CMOS The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The IN74HC4046A
FST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
NJM2722. Single Ultra-High speed and Wide Band Operational Amplifier
Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM2722 is a single, ultra-high speed and wide band operational amplifier that features 1V/μs slew rate and 1ohm load
NJM2871/A, NJM2872/A LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2871/A, NJM2872/A are low dropout voltage regulators designed for cellular phone application. Advanced Bipolar technology achieves low noise, high
100MHz INPUT MIXER AND 450kHz IF GAIN CONTROL IC
1MHz INPUT ER AND 4kHz GAIN CONTROL IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJM87 is an Gain Control IC with 4kHz (standard) input, which operates from.7v to.v supply. It includes a local-buffer, mixer,
Triple 2-Channel Analog Multiplexer/Demultiplexer
November 1983 Revised April 2002 CD4051BC CD4052BC CD4053BC Single 8-Channel Analog Multiplexer/Demultiplexer Dual 4-Channel Analog Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer
8-BIT SERIAL-INPUT SHIFT REGISTER WITH LATCHED 3-STATE OUTPUTS High-Performance Silicon-Gate CMOS
8-BIT SERIAL-INPUT SHIFT REGISTER WITH LATCHED -STATE OUTPUTS High-Performance Silicon-Gate CMOS The IN74HC4094 is identical in pinout to the LS/ALS4094. The device inputs are compatible with standard
General Purpose Clock Synthesizer
1CY 290 7 fax id: 3521 CY2907 General Purpose Clock Synthesizer Features Highly configurable single PLL clock synthesizer provides all clocking requirements for numerous applications Compatible with all
UNISONIC TECHNOLOGIES CO., LTD CD4541
UNISONIC TECHNOLOGIES CO., LTD CD4541 PROGRAMMABLE TIMER DESCRIPTION The CD4541 programmable timer comprise a 16-stage binary counter, an integrated oscillator for use with an external capacitor and two
QUAD PIN ELECTRONICS DRIVER
QUAD PIN ELECTRONICS DRIVER GENERAL DESCRIPTION The NJU6495 is a quad pin driver fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, flash
Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer
November 1983 Revised January 1999 CD4051BC CD4052BC CD4053BC Single 8-Channel Analog Multiplexer/Demultiplexer Dual 4-Channel Analog Multiplexer/Demultiplexer Triple 2-Channel Analog Multiplexer/Demultiplexer
VCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs
Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General Description The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing
HD44105D. (Dot Matrix Liquid Crystal Graphic Display Common Driver) Description. Features. Ordering Information
(Dot atrix Liquid Crystal Graphic Display Common Driver) Description The HD44105 is a common signal driver for LCD dot matrix graphic display systems. It generates the timing signals required for display