Small Sized Quartz Crystal Oscillator. PAD LOCATION/PIN CONFIGURATION Thin-Chip
|
|
- Benedict Bates
- 5 years ago
- Views:
Transcription
1 Small Sized Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6366 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 3-stage divider generates only one frequency selected of f 0,f 0 /2,f 0 /4 and f 0 /8 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible Furthermore, the package is small-sized MTP-6. PACKAGE OUTLINE NJU6366XC-C NJU6366XF1 FEATURES Operating Voltage 2.0 to 5.5V Maximum Oscillation Frequency 50MHz Low Operating High Fan-out I OH /I OL 3-Stage Divider One of f 0,f 0 /2,f 0 /4 and f 0 /8 Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation Capacitors Cg and Cg on-chip Package Outline Thin-Chip/MTP-6 C-MOS Technology PAD LOCATION/PIN CONFIGURATION Thin-Chip MTP !LINE-UP TABLE Internal Connect Type No. Cg/Cd Connect Non Connect A f 0 A Line B,C,D Line 23/23pF B f 0 /2 B Line A,C,D Line 23/23pF NJU6366 C f 0 /4 C Line A,B,D Line 23/23pF D f 0 /8 D Line A,B,C Line 23/23pF!COORDINATES Pad Name X Y Starting Point:Chip Center Unit[um] Chip Size:0.67x0.75mm Thin-Chip Thickness(-C):260±20um Pad Size:90x90um Die Subsate: Level BLOCK DIAGRAM Rf 1/2 1/2 1/2 Cg Cd A B C D 3-STATE BUFFER 2007/12/21 ( 1 / 6 )
2 TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Conol H or OPEN L Quartz Crystal Connecting Terminals =0V Frequency Output =2.5V/3.0V/5.0V Note1) Refer to the line-up table. Output either one frequency selected of f 0, f 0 /2,f 0 /4 and f 0 /8 Note1) Oscillation Stop and High impedance Output ABSOLUTE MAXIMUM RATINGS (Ta=25 C) PARAMETER SYMBOL RATING UNIT Supply Voltage -0.5 to +7.0 V Input Voltage V IN -0.5 to +0.5 V Output Voltage V O -0.5 to +0.5 V Input I IN ±10 ma Output I O ±25 ma Power Dissipation Note4) P D 200(MTP-6) mw Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage( ) is less than 7.0V, the input voltage must not over the level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between and due to the stabilized operation for the circuit. Note4) The power dissipation is the maximum value at only the package. 2007/12/21 ( 2 / 6 )
3 ELECTRICAL CHARACTERISTICS (Ta=25 C) Operating Voltage V ( =2.5V,Ta=25 C) A version,fosc=16mhz,c L =15pF 5 Operating I DD B version,fosc=16mhz,c L =15pF 4 C version,fosc=16mhz,c L =15pF 3 ma D version,fosc=16mhz,c L =15pF 3 Oscillation Stopping I STB =, No load 2 5 ua Stand-by Ist ==, No load Note5) 1 ua Input Voltage Output V IH V V IL V I OH V OH =2.2V 4 ma I OL V OL =0.3V 4 ma Input I IN = ua = ua 3-state Off Leakage I OZ =, = or ±0.1 ua Feedback Resistance Rf 255 kω Internal Capacitor Cg/Cd fosc=16mhz 23/23 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L / SYM Symmey C L / % Output Signal Rise C L =15pF,10% to 90% 3 6 C L =30pF,10% to 90% 3 6 Output Signal Fall C L =15pF,90% to 10% 3 6 C L =30pF,90% to 10% 3 6 Output Disable time t PLZ C L =15pF,R UP =10kΩ 250 Output Enable t PZL C L =15pF,R UP =10kΩ 250 Note5) Excluding input current on Terminal. 2007/12/21 ( 3 / 6 )
4 ( =3.0V,Ta=25 C) A version,fosc=16mhz,c L =15pF 6 Operating I DD B version,fosc=16mhz,c L =15pF 5 C version,fosc=16mhz,c L =15pF 4 ma D version,fosc=16mhz,c L =15pF 4 Oscillation Stopping I STB =, No load 2 5 ua Stand-by Ist ==, No load Note5) 1 ua Input Voltage Output V IH V V IL V I OH V OH =2.7V 5 ma I OL V OL =0.3V 5 ma Input I IN = ua = ua 3-state Off Leakage I OZ =, = or ±0.1 ua Feedback Resistance Rf 255 kω Internal Capacitor Cg/Cd fosc=16mhz 23/23 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L / SYM Symmey C L / % Output Signal Rise C L =15pF,10% to 90% 3 6 C L =30pF,10% to 90% 3 6 Output Signal Fall C L =15pF,90% to 10% 3 6 C L =30pF,90% to 10% 3 6 Output Disable time t PLZ C L =15pF,R UP =10kΩ 200 Output Enable t PZL C L =15pF,R UP =10kΩ 200 Note5) Excluding input current on Terminal. 2007/12/21 ( 4 / 6 )
5 ( =5.0V,Ta=25 C) A version,fosc=16mhz,c L =15pF 10 Operating I DD B version,fosc=16mhz,c L =15pF 9 C version,fosc=16mhz,c L =15pF 9 ma D version,fosc=16mhz,c L =15pF 8 Oscillation Stopping I STB =, No load 5 10 ua Stand-by Ist ==, No load Note5) 1 ua Input Voltage Output V IH V V IL V I OH V OH =4.5V 8 ma I OL V OL =0.5V 8 ma Input I IN = ua = ua 3-state Off Leakage I OZ =, = or ±0.1 ua Feedback Resistance Rf 255 kω Internal Capacitor Cg/Cd fosc=16mhz 23/23 pf Maximum Oscillation Frequency F MAX 50 MHz Output Signal C L / SYM Symmey C L / % Output Signal Rise C L =15pF,10% to 90% 3 6 C L =30pF,10% to 90% 3 6 Output Signal Fall C L =15pF,90% to 10% 3 6 C L =30pF,90% to 10% 3 6 Output Disable time t PLZ C L =15pF,R UP =10kΩ 100 Output Enable t PZL C L =15pF,R UP =10kΩ 100 Note5) Excluding input current on Terminal. 2007/12/21 ( 5 / 6 )
6 !MEASUREMENT CIRCUITS (1)Output Signal Symmey(C L =15pF) Pulse Generator 1000pF 50Ω C L=15pF H L 1/2 (2)Output Signal Rise/Fall (C L =15pF) Pulse Generator 1000pF 50Ω C L=15pF 90% 50% 10% (3)Output Disable/Enable (C L =15pF,R UP =10kΩ) R UP=10kΩ Pulse Generator 50Ω C L=15pF t PLZ V OL V OH t PZL [CAUTION] The specificatio on this data book are only given for information, without any guarantee as regards either mistakes or omissio. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the indusial rights. 2007/12/21 ( 6 / 6 )
High Drive Fundamental Quartz Crystal Oscillator
High Drive Fundamental Quartz Crystal Oscillator NJU6368 Series PRELIMINARY GENERAL DESCRIPTION The NJU6368 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier,
More information1.5V Operation Fundamental Quartz Crystal Oscillator
1.5 Operation Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6369 series is a C-MOS IC for fundamental quartz crystal oscillator that coists of an oscillation amplifier, 5-stage divider
More informationHigh Drive Fundamental Quartz Crystal Oscillator
PRELIMINARY High Drive Fundamental Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6360 series is a C-MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider
More informationNJU6366 Series. Small Sized Quartz Crystal Oscillator PACKAGE OUTLINE
Small Sized Quartz rystal Oscillator GENERAL DESRIPTION The NJU6366 series is a -MOS fundamental quartz crystal oscillator that coists of an oscillation amplifier, 3-stage divider and 3-state output buffer.
More informationQuartz Crystal Oscillator IC with Selectable Divider
Quartz Crystal Oscillator IC with Selectable Divider GENERAL DESCRIPTION The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz. The oscillation amplifier incorporates feedback resistor and
More informationLow Operating Current Fundamental Quartz Crystal Oscillator IC
Low Operating Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU66 series is a C-MOS IC for fundamental quartz crystal oscillator that consists of an oscillation amplifier, -stage divider
More information3rd. Over Tone Quartz Crystal Oscillator
3rd. Over Tone Quartz Crystal Oscillator GENERAL DESCRIPTION The NJU6377 series is a C-MOS 3rd. over tone quartz crystal oscillator that consists of an oscillation amplifier and 3-state output buffer.
More informationNJU6395 Series QUARTZ CRYSTAL OSCILLATOR
QUARTZ CRYSTAL OSCILLATOR NJU6395 Series GENERAL DESCRIPTION The NJU6395 series is up to 125MHz low-voltage C-MOS quartz crystal oscillator, the NJU6395A is up to 110MHz and the NJU6395B is up to 125MHz.
More information32.768kHz output Tuning fork Quartz Crystal Oscillator IC
32.768kHz output Tuning fork Quartz Crystal Oscillator IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU6229 is a CMOS oscillator IC which is designed for 32.768kHz tuning fork quartz unit. The NJU6229 is
More information(V DD =1.62 to 3.63V, V SS =0V, Ta=25 C) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT x1 version (f 0 ) No load V DD =1.8V
Low phase noise Fundamental Quartz Crystal Oscillator IC GENERAL DESCRIPTION The NJU6222 series is a C-MOS quartz crystal oscillator IC (20MHz to 50MHz) realized very low phase noise. It is consisted of
More informationSERIAL I/O REAL TIME CLOCK
SERIAL REAL TIME CLOCK GENERAL DESCRIPTION The NJU6355 series is a serial real time clock suitable for 4 bits microprocessor. It contains quartz crystal oscillator, counter, shift register, voltage regulator,
More informationNJU BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3715 is a 16-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
More informationNJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as
More informationNJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
More informationNJU3712A 8-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712A is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
More informationNJU3714A 12-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
12-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3714A is a 12-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
More informationNJU3716A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport
More informationNJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
20-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3718 is a 20-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
More informationNJU3719A 24-BIT SERIAL TO PARALLEL CONVERTER ! PACKAGE OUTLINE ! GENERAL DESCRIPTION ! PIN CONFIGURATION ! FEATURES !
24-BIT SERIAL TO PARALLEL CONVERTER! GENERAL DESCRIPTION The NJU3719A is a 24-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
More informationSIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
More informationCF5073 series VCXO Module ICs with Built-in Varicap
XO Module ICs with Built-in Varicap OVERVIEW The CF5073 series are XO ICs with built-in varicap diode. They use a recently developed negative-resistance switching oscillation circuit, at oscillation startup
More informationNJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712 is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 4.5V to 5.5V. The effective
More informationNJU7108 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR NJU78 GENERAL DESCRIPTION The NJU78 is a super small-sized package single C-MOS comparator with push pull output. The operating
More informationHigh Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
More informationNJU7670V VOLTAGE TRIPLER PRELIMINARY
VOLTAGE TRIPLER GENERAL DESCRIPTION The NJU7670 is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double negative
More informationPiezo-sounder Driver with Multi-mode charge pump. C 2 =0.1uF. C 1 =0.1uF CP1 CN1 CP2 CN2. Charge Pump (1x / 2x / 3x) Control Logic
Piezo-sounder Driver with Multi-mode charge pump NJU72501 GENERAL DESCRIPTION The NJU72501 is a switching driver with multi mode charge pump for piezo-sounder. It can drive outputs up to 18pp from 3 supply.
More informationLow Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
More informationAPPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
More informationCF5008A1 2. VCXO Module IC OVERVIEW FEATURES SERIES CONFIGURATION ORDERING INFORMATION
NIPPON PRECISION CIRCUITS INC. CF5008A1 VCXO Module IC OVERVIEW The CF5008A1 is a VCXO module IC that employs a circuit structure with low parasitic capacitance effects and a wide frequency range. Built-in
More informationULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
More informationNJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
More informationNJU7670 VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE
VOLTAGE TRIPLER GENERAL DESCRIPTION PACKAGE OUTLINE The is a voltage tripler incorporated CR oscillator, voltage converter, reference voltage circuit and voltage regulator. It can generates triple or double
More informationSingle-phase DC Brushless Motor Driver IC *MEET JEDEC MO-187-DA / THIN TYPE. PIN No. PIN NAME 1 OUTB 2 VDD 3 IN+ 4 IN- 5 FG 6 PWM 7 OUTA 8 GND + -
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION The is a single-phase motor driver IC. It features lock detect, FG output and thermal shutdown circuit functions. The motor rotational speed
More informationMonaural BTL Output Clock-less Switching Driver for Class D Amplifier
Monaural BTL Output Clock-less Switching Driver for Class D Amplifier GENERAL DESCRIPTION PACKAGE OUTLE The NJU8789 is a monaural BTL output switching driver for class D amplifier including Separated Power
More information1/3, 1/4 Duty LCD Driver
1/3, 1/4 Duty LCD Driver GENERAL DESCRIPTION NJU6533 is a 1/3 or 1/4 duty segment type LCD driver. It incorporates 4 common driver circuits and 32 segment driver circuits. NJU6533 can drive maximum 96
More information74AC821 74ACT Bit D-Type Flip-Flop with 3-STATE Outputs
74AC821 74ACT821 10-Bit D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT821 is a 10-bit D-type flip-flop with 3-STATE outputs arranged in a broadside pinout. Ordering Code: Features
More information74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
More information74ALVC Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs
74ALVC162245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in A Port Outputs General Description The ALVC162245 contains sixteen non-inverting
More informationNTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL)
NTE980 Integrated Circuit CMOS, Micropower Phase Locked Loop (PLL) Description: The NTE980 CMOS Micropower Phase Locked Loop (PLL) consists of a low power, linear voltage controlled oscillator (VCO) and
More information74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
More informationNJM2373A/76 ADJUSTABLE HIGH PRECISION SHUNT REGULATOR
ADJUSTABLE HIGH PRECISION SHUNT REGULATOR GENERAL DESCRIPTION NJM373 / NJM373A / NJM376 is an adjustable high precision shunt regulator. The output voltage can be adjusted to any value between reference
More informationLOW VOLTAGE AUDIO POWER AMPLIFIER
LOW VOLTAGE AUDIO POWER AMPLIFIER NJM19 GENERAL DESCRPTION The NJM19 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential
More informationGSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
More informationPhase-Locked Loop High-Performance Silicon-Gate CMOS
TECHNICAL DATA Phase-Locked Loop High-Performance Silicon-Gate CMOS The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The IN74HC4046A
More informationNJU6385. Low phase noise Fundamental Quartz Crystal Oscillator IC.
Low phase noise Fundamental Quartz Crystal Oscillator IC FETURES( =3.3V, f 0 =49.152MHz, Ta=25 C) Phase noise -103dBc/Hz(Typ.) @10Hz Offset -163dBc/Hz(Typ.) @1kHz Offset RMS Jitter 0.05psec(Typ.) @12kHz
More informationULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
NJM271 ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM271 is an ultra high speed hex operational amplifier. It can swings 26V/µs high slew rate and 1GHz gain band width product(1mhz
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM2742 is a high speed single supply operational amplifier.the low V OL enables to treat small output signal on a single supply.
More informationC-MOS STEP-UP SWITCHING REGULATOR EQUIVALENT CIRCUIT
C-MOS STEP-UP SWITCHING REGULATOR GENERAL DESCRIPTION The NJU7262 series is a C-MOS step-up switching regulator which contains accurate voltage reference, error amplifier, CR oscillator, control circuit,
More information8-BIT SERIAL-INPUT SHIFT REGISTER WITH LATCHED 3-STATE OUTPUTS High-Performance Silicon-Gate CMOS
8-BIT SERIAL-INPUT SHIFT REGISTER WITH LATCHED -STATE OUTPUTS High-Performance Silicon-Gate CMOS The IN74HC4094 is identical in pinout to the LS/ALS4094. The device inputs are compatible with standard
More informationNJU7046/NJU7047/NJU7048
NJU76/NJU77/NJU7 9V/μs High-Speed, Rail-to-rail I/O CMOS Operational Amplifier FEATURES (V + =V, V - =V, Ta= C) High Slew Rate 9V/µs Wide Bandwidth MHz Low Input Bias Current pa Rail-to-Rail Input and
More informationRecommended crystal unit/ resonator. 5036G 80 to A1 5036A2 3rd overtone, 5036B 2. Fundamental,
2.5V LV-PECL Output Oscillator ICs OVERVIEW The 5036 series are 2.5V operation, differential LV-PECL output oscillator ICs. They support 50MHz to 400MHz 3rd overtone oscillation and 50MHz to 600MHz fundamental
More informationWide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
More informationHD44105D. (Dot Matrix Liquid Crystal Graphic Display Common Driver) Description. Features. Ordering Information
(Dot atrix Liquid Crystal Graphic Display Common Driver) Description The HD44105 is a common signal driver for LCD dot matrix graphic display systems. It generates the timing signals required for display
More information74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs
74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and
More informationLow-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
More informationCLASS D AMPLIFIER FOR DIGITAL AUDIO ! PACKAGE OUTLINE ! PIN CONFIGURATION V DD STBY TEST MUTE V DDL OUT LP V SSL OUT LN RST V SS
PRELIMINARY CLASS D AMPLIFIER FOR DIGITAL AUDIO! GENERAL DESCRIPTION The NJU8725 is an 800mW-output class D Amplifier featuring 6 th Σ modulation. It includes Digital Attenuator, Mute, and De-emphasis
More informationNJM2737. Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier
Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM2737 is a Rail-to-Rail Input/Output single supply dual operational amplifier featuring low voltage operation,
More informationFST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
More information74AC573 74ACT573 Octal Latch with 3-STATE Outputs
74AC573 74ACT573 Octal Latch with 3-STATE Outputs General Description The 74AC573 and 74ACT573 are high-speed octal latches with buffered common Latch Enable (LE) and buffered common Output Enable (OE)
More informationRecommended crystal unit/ resonator. Fundamental, Fundamental, 3rd overtone, SAW. 80 to A1N No 2.5. SAW 110 to B1N
2.5V LVDS Output Oscillator ICs OVERVIEW The 5037 series are 2.5V operation, LVDS output oscillator ICs. They support 80MHz to 400MHz 3rd overtone oscillation and 80MHz to 600MHz fundamental oscillation.
More informationNJM2722. Single Ultra-High speed and Wide Band Operational Amplifier
Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM2722 is a single, ultra-high speed and wide band operational amplifier that features 1V/μs slew rate and 1ohm load
More informationObsolete Product(s) - Obsolete Product(s)
HEX BUS BUFFER WITH 3 STATE OUTPUT INVERTING HIGH SPEED: t PD = 9 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
More informationSM5006 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The SM5006 series are crystal oscillator module ICs, that incorporate high-frequency, low current consumption oscillator and output buffer circuits. Highly accurate
More informationChapter 6 DIFFERENT TYPES OF LOGIC GATES
Chapter 6 DIFFERENT TYPES OF LOGIC GATES Lesson 8 NMOS gates Ch06L8-"Digital Principles and Design", Raj Kamal, Pearson Education, 2006 2 Outline NMOS (n-channel based MOSFETs based circuit) NMOS Features
More informationNJM2783. Preliminary. Monaural Microphone Amplifier with ALC
Preliminary NJM2783 Monaural Microphone Amplifier with ALC GENERAL DESCRIPTION The NJM2783 is a monaural microphone amplifier with auto level control function to avoid distortion due to clipping. The voltage
More informationProduct Data Sheet XO5629 series Ultra-low Power KHz Crystal Oscillator IC. Features. Application. Ordering Information.
Features Wide range of operating supply voltage: 1.6V to 5.5V Low crystal drive current oscillation for miniature crystal units Ulta-Low power consumption(25ua/1.8v ) XO5629A/B series: for Wire Bonding
More informationObsolete Product(s) - Obsolete Product(s)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 10 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
More informationNJM2823. Precision Micropower Shunt Voltage Reference
Precision Micropower Shunt Voltage Reference GENERAL DESCRIPTION NJM2823 is a precision and low quiescent current shunt voltage reference. Reference voltage form bandgap circuit has guaranteed the high
More informationLow Noise, High-Speed Dual Operational Amplifier. Vni = 3nV/ Hz typ. (at f=10khz) ft = 90MHz typ. (at V + /V - = ±2.5V)
Low Noise, High-Speed Dual Operational Amplifier NJM2719 GENERAL DESCRIPTION The NJM2719 is a high speed voltage feedback dual operational amplifier specifically optimized for low voltage noise. Combining
More informationDesignated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
More informationXC2163 Series GENERAL DESCRIPTION APPLICATIONS FEATURES PIN ASSIGNMENT PIN CONFIGURATION /INH, Q0 PIN FUNCTION
ETR1403_001a ICs for use with 3rd Overtone Crystal Oscillators GENERAL DESCRIPTION The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits.
More information74ACTQ Bit Buffer/Line Driver with 3-STATE Outputs
18-Bit Buffer/Line Driver with 3-STATE Outputs General Description The ACTQ18825 contai eighteen non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address driver, clock
More informationLC7215, 7215F, 7215FM. MW/LW PLL Frequency Synthesizers. Package Dimensions. Overview. Features
Ordering number: EN 3584B Silicon-gate CMOS LSI LC7215, 7215F, 7215FM MW/LW PLL Frequency Synthesizers Overview The LC7215, LC7215F and LC7215FM are phase-locked-loop frequency synthesizer LSIs that provide
More informationSCAN18374T D-Type Flip-Flop with 3-STATE Outputs
SCAN18374T D-Type Flip-Flop with 3-STATE Outputs General Description The SCAN18374T is a high speed, low-power D-type flipflop featuring separate D-type inputs organized into dual 9- bit bytes with byte-oriented
More informationNJU7385. Dual H-bridge Driver for actuator
Dual H-bridge Driver for actuator GENERAL DESCRIPTION The NJU7385 is a dual H-bridge driver IC that has general versatility for a compact actuator. The Mode Select Function in the control part can select
More informationHD61103A. (Dot Matrix Liquid Crystal Graphic Display 64-Channel Common Driver) Features. Description. Ordering Information
(Dot Matrix Liquid Crystal Graphic Display 64-Channel Common Driver) Description The is a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals (switch
More informationProduct Data Sheet XO5029 series KHz Crystal Oscillorator IC. Features. Application. Ordering Information. Description.
Features Wide range of operating supply voltage: 1.5V to 5.5V Low crystal drive current oscillation for miniature crystal units Low power consumption(0.18ma/1.8v) XO5029Bx series: for Wire Bonding (type
More informationICS2510C. 3.3V Phase-Lock Loop Clock Driver. Integrated Circuit Systems, Inc. General Description. Pin Configuration.
Integrated Circuit Systems, Inc. ICS250C 3.3V Phase-Lock Loop Clock Driver General Description The ICS250C is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology
More information74LCX125 Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs
Low Voltage Quad Buffer with 5V Tolerant Inputs and Outputs General Description The LCX125 contains four independent non-inverting buffers with 3-STATE outputs. The inputs tolerate voltages up to 7V allowing
More information5059H series 32kHz output Crystal Oscillator Module ICs
32kHz output Crystal Oscillator Module ICs OVERVIEW The 5059H series are 32.768kHz output and 125 C operation crystal oscillator module ICs with divide-by-512 (or divide-by-1024) frequency, AT-cut crystal
More informationM74HCT244TTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V
More informationHCF4044B QUAD NAND 3-STATE R-S LATCH
QUAD NAND 3-STATE R-S LATCH QUIESCENT CURRENT SPECIFIED UP TO 20V 3-LEVEL OUTPUTS WITH COMMON OUTPUT ENABLE SEPARATE SET AND RESET INPUT FOR EACH LATCH 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE
More information74V1T126CTR SINGLE BUS BUFFER (3-STATE)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.6ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN
More information74LX1G07CTR SINGLE BUFFER/DRIVER (OPEN DRAIN)
SINGLE BUFFER/DRIVER (OPEN DRAIN) 5V TOLERANT INPUTS HIGH SPEED: t PD =4.2ns (MAX.) at V CC = 3.3V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C POWER DOWN PROTECTION ON INPUTS AND OUTPUTS POWER
More informationNJM2720. Single Ultra-High speed and Wide Band Operational Amplifier
NJM272 Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM272 is a single, ultra-high speed and wide band operational amplifier that features 2V/μs slew rate and 1ohm
More information74AC299 74ACT299 8-Input Universal Shift/Storage Register with Common Parallel I/O Pins
8-Input Universal Shift/Storage Register with Common Parallel I/O Pi General Description The AC/ACT299 is an 8-bit universal shift/storage register with 3-STATE outputs. Four modes of operation are possible:
More information5056 series Crystal Oscillator Module ICs
Crystal Oscillator Module ICs OVERVIEW The 556 series are 7 to 135MHz oscillation frequency, crystal oscillator module ICs optimized for 3rd overtone crystal elements with C 2 to 4pF. They have built-in
More informationIPS009 series IC CMOS SPXO
IPS009 series IC CMOS SPXO Description IPS009 is the IC for SPXO corresponding to the fundamental crystal from 14MHZ to 100MHz, and operation voltage is 1.2V minimum, so it is the best for the application
More informationNJM2344. PWM DC/DC Converter IC with Standby Function FEATURES
PWM DC/DC Converter IC with Standby Function GENERAL DESCRIPTION The NJM344 is a general purpose PWM DC/DC converter IC configurable for step-up, step-down and inverting applications. An internal.a power
More informationTC74LCX07F,TC74LCX07FN,TC74LCX07FT,TC74LCX07FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74LCX07F/FN/FT/FK TC74LCX07F,TC74LCX07FN,TC74LCX07FT,TC74LCX07FK Low-Voltage HEX Buffer with 5-V Tolerant Inputs and Outputs (open drain) The
More information74ALVC16500 Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs
Low Voltage 18-Bit Universal Bus Transceivers with 3.6V Tolerant Inputs and Outputs General Description The ALVC16500 is an 18-bit universal bus transceiver which combines D-type latches and D-type flip-flops
More informationOUTPUT COUPLING CAPACITOR-LESS LOW VOLTAGE VIDEO AMPLIFIER WITH LPF
OUTPUT COUPLING CAPACITOR-LESS LOW VOLTAGE VIDEO AMPLIFIER WITH LPF GENERAL DESCRIPTION The NJU7 is a Low Voltage Video Amplifier with LPF circuit. By the internal charge pump circuit, output capacitor
More informationObsolete Product(s) - Obsolete Product(s)
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: t PD = 13 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
More information74AC244 74ACT244 Octal Buffer/Line Driver with 3-STATE Outputs
Octal Buffer/Line Driver with 3-STATE Outputs General Description The AC/ACT244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus-oriented tramitter/receiver
More informationCLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1
19-2575; Rev 0; 10/02 One-to-Four LVCMOS-to-LVPECL General Description The low-skew, low-jitter, clock and data driver distributes one of two single-ended LVCMOS inputs to four differential LVPECL outputs.
More information100MHz INPUT MIXER AND 450kHz IF GAIN CONTROL IC
1MHz INPUT ER AND 4kHz GAIN CONTROL IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJM87 is an Gain Control IC with 4kHz (standard) input, which operates from.7v to.v supply. It includes a local-buffer, mixer,
More informationObsolete Product(s) - Obsolete Product(s)
QUAD 2 CHANNEL MULTIPLEXER (3-STATE) HIGH SPEED : t PD = 11 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
More informationObsolete Product(s) - Obsolete Product(s)
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: t PD = 12 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
More information74ABT373 Octal Transparent Latch with 3-STATE Outputs
Octal Traparent Latch with 3-STATE Outputs General Description The ABT373 coists of eight latches with 3-STATE outputs for bus organized system applicatio. The flip-flops appear traparent to the data when
More information74ABT Bit Transceiver with 3-STATE Outputs
74ABT16245 16-Bit Traceiver with 3-STATE Outputs General Description The ABT16245 contai sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applicatio. The
More information