SGM9123 Triple, 8MHz, 3rd Order SDTV Video Filter Drivers

Size: px
Start display at page:

Download "SGM9123 Triple, 8MHz, 3rd Order SDTV Video Filter Drivers"

Transcription

1 SGM9 Triple, MHz, rd Order GENERAL DESRIPTION SGM9 is a video buffer which integrates triple db Gain rail-to-rail output driver and triple rd output reconstruction filter, it has MHz -db bandwidth and V/µs slew rate. SGM9 provides improved image quality compared with passive L filters and discrete drivers solution. Operating from single supplies ranging from +.V to +.V and sinking an ultra-low.ma quiescent current, the SGM9 is ideally suited for battery powered applications. SGM9 can be D-coupled or A-coupled with input video signal, such as the output stage of DA to eliminate out-of-band noise. Internal diode clamps and bias circuitry may be used if A-coupled inputs are required. SGM9 also integrates an internal level shift circuit which avoids sync-pulse being clipped and allows D-coupled output. The drivers in SGM9 can drive D or A-coupled single (Ω) or dual ( Ω) loads. The SGM9 has lead (Pb) free SO- package and ESD (HBM) reaches KV. FEATURES Triple rd Order MHz (SD) Filters Transparent Input lamping db Output Driver Gain and Drive Dual Video Load Rail-to-Rail Output Input Voltage Range Includes Ground A or D oupled Inputs A or D oupled Outputs Operates from.v to.v Single Power Supply Low Power (.ma/hannel).ma Total Supply urrent Lead (Pb) Free SO- Package APPLIATIONS Video Amplifiers able and Satellite Set Top Boxes ommunications Devices Video on Demand Portable and Handheld Products Personal Video Recorders DVD Players SDTVs BLOK DIAGRAM IN Transparent lamp MHz, rd order db OUT IN Transparent lamp MHz, rd order db OUT IN Transparent lamp MHz, rd order db OUT REV. A

2 SGM9 Triple, MHz, rd Order PAKAGE/ORDERING INFORMATION ORDER NUMBER PAKAGE DESRIPTION TEMPERATURE RANGE PAKAGE OPTION MARKING INFORMATION SGM9XS/TR SO- - to + Tape and Reel, SGM9XS PIN ONFIGURATION (Top View) PIN DESRIPTION SGM9XS IN IN IN +V S SO- OUT OUT OUT PIN NAME FUNTION IN Video input, channel IN Video input, channel IN Video input, channel +V S Power supply Ground OUT Filtered output, channel OUT Filtered output, channel OUT Filtered output, channel ABSOLUTE IMUM RATINGS Supply Voltage, V+ to V-....V Input Voltage V to (+V S) +.V Storage Temperature Range... to + Junction Temperature... Operating Temperature Range... to + Power Dissipation, P T A = SO-...W Package Thermal Resistance SO-, θ JA... /W Lead Temperature Range (Soldering sec)... ESD Susceptibility HBM...V MM...V AUTION This integrated circuit can be damaged by ESD. SGMIRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. NOTES. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

3 SGM9 Triple, MHz, rd Order ELETRIAL HARATERISTIS: V S = +.V (At R L = Ω connected to, V IN = Vpp,and IN =.µf, all outputs A coupled with µf,unless otherwise noted) SGM9 PARAMETER INPUT HARATERISTIS Output Level Shift Voltage (V OLS) Input Voltage lamp (V LAMP ) lamp harge urrent Voltage Gain ( A V ) OUTPUT HARATERISTIS Output Voltage High Swing Output Short-ircuit urrent (I S ) POWER SUPPL Operating Voltage Range Power Supply Rejection Ratio (PSRR) Quiescent urrent (I Q ) DNAMI PERFORMANE ±.db Bandwidth -db Bandwidth Filter Response Normalized Gain: f IN =.MHz f IN = MHz Slew Rate Differential Gain (DG) Differential Phase (DP) Group Delay Variation (D/DT) rosstalk (channel - to - channel) Fall Time Rise Time ONDITIONS V IN = V, no load I IN = -ma V IN = V LAMP -mv R L = Ω V IN = V, R L = Ω to V IN = V, to through Ω V IN = mv, out short to V DD through Ω V s = +.V to +.V V IN = mv, R L = Ω R L = Ω % to %, V IN = V Step, NTS & PAL D coupled NTS & PAL A coupled NTS & PAL D coupled NTS & PAL A coupled f = KHz,.MHz at MHz.V STEP, % to %.V STEP, % to % / OVER TEMPERATURE to to UNITS mv mv ma V/V V/V V ma ma V V db ma MHz MHz db db V/µs % % ns db ns ns / Specifications subject to changes without notice.

4 SGM9 Triple, MHz, rd Order IAL PERFORMANE HARATERISTIS At V S = +.V, T A = +, R L = Ω, all outputs A coupled with µf, unless otherwise noted. Frequency Response Phase vs. Frequency Normalized Gain (db) Phase (degree) Large Signal Step Response. Small Signal Step Response.. Output Voltage (V) Output Voltage (V) Time (µs) Time (µs) - PSRR vs. Frequency (Bypass aps) PSRR vs. Frequency (No Bypass aps) - - PSRR (db) PSRR (db)

5 SGM9 Triple, MHz, rd Order IAL PERFORMANE HARATERISTIS At V S = +.V, T A = +, R L = Ω, all outputs A coupled with µf, unless otherwise noted. Gain Error vs. Temperature 9 Quiescent urrent vs. Supply Voltage.. Gain Error (%) Temperature ( ) Quiescent urrent (ma) Supply Voltage (V) Group Delay vs. Frequency Quiescent urrent vs. Temperature Group Delay (ns) Quiescent urrent (ma) Temperature ( ). Output Voltage Swing to The Negative Rail vs. Output urrent Output Voltage Swing to The Positive Rail vs. Output urrent Output Voltage (v) Output urrent (ma) Output Voltage (v) Output urrent (ma)

6 SGM9 Triple, MHz, rd Order APPLIATIONS INFORMATION Functional Description SGM9 operates from a single +.V to +V supply. In application, SGM9 is a fully integrated solution for filtering and buffering SDTV signals in front of video decoder or behind video encoder. For example, SGM9 can replace three passive L filters and three amplifier drivers at VBS and S-video output side in set-top box and DVD player, this solution can help you save PB size and production cost, it also improves video signal performance comparing with traditional design using discrete components. SGM9 features a D-coupled input buffer, -pole low-pass filter to eliminate out-of-band noise of video encoder, and a gain of +db in the output amplifier to drive load. The A or D-coupled input buffer eliminates sync crush, droop, and field tilt. The output of SGM9 also can be D-coupled or A-coupled. Input onsiderations Besides A coupling, the SGM9 inputs also can be D-coupled. In D coupling application, No input coupling capacitors are needed because the amplitude of input video signal from DA includes ground and extends up to.v, then SGM9 can be directly connected to the output of a single-supply, current-output DA without any external bias network. Some time, if DA s output level exceeds the range of V to.v, or SGM9 is driven by an unknown external source or a SART switch which has its own clamping circuit, A coupling is needed in such applications. Output onsiderations The SGM9 outputs can be D-coupled or A-coupled. When V is input, the SGM9 output voltage is mv typically. In D coupling design, one resistor is used to onnect SGM9 s output pin with external load directly, this serial back-termination resistor is used to match the impedance of the transmission line between SGM9 and external load to cancel the signal reflection. The SGM9 outputs can sink and source current allowing the device to be A-coupled with external load, in A coupling, µf at least capacitor will be used in order to eliminate field tilt. Power-Supply Bypassing and Layout orrect power supply bypassing is very important for optimizing video performance in design. One.µF and one µf capacitors are always used to Bypass V pin of SGM9, please place these two capacitors as close to the SGM9 output pin as possible, a large ground plane is also needed to ensure optimum performance. The input and output termination resistors should be placed as close to the related pin of SGM9 as possible to avoid performance degradation. The PB traces at the output side should have characteristic impedance in order to match the characteristic impedance cable connecting external load. In design, please keep the board trace at the inputs and outputs of the SGM9 as short as possible to minimize the parasitic stray capacitance and noise pickup. Typical Application Diagram The following schematic in Figure is normally used for A coupled output and D-coupled input with DA which has an output voltage range of V to.v. A coupled output offer slightly lower power dissipation and high ESD protection ability. The schematics in Figure and Figure are also popular in design. Figure is a kind of special application in STB. VBS IN IN IN +VS OUT SGM9.µF or.µf OUT OUT µf +V VBS Figure. D oupling Application Schematic

7 SGM9 Triple, MHz, rd Order.µF or.µf µf +V.µF or.µf µf +V S- Video VBS.µF.µF.µF +VS IN OUT SGM9 IN OUT IN OUT µf µf µf VBS VBS +VS IN OUT SGM9 IN OUT IN OUT µf µf µf VBS Figure. A oupling Application Schematic Figure. Input D oupling and Output A oupling Application Schematic.µF or.µf µf V SO Of STB Pb +V S IN OUT A SGM9 IN OUT B µf µf µf µf to Loading to Loading to Loading to Loading to Loading The three ports of A,B and should be immediate as signal output pin in layout Pr IN OUT µf µf to Loading Figure. Input D oupling and Output A oupling Application Schematic in STB

8 SGM9 Triple, MHz, rd Order PAKAGE OUTLINE DIMENSIONS SO- D Symbol Dimensions In Millimeters Dimensions In Inches L Min Max Min Max A....9 A.... E E A.... B θ A B e A A D....9 E.... E.... e.. L.... θ / REV. A SGMIRO is dedicated to provide high quality and high performance analog I products to customers. All SGMIRO products meet the highest industry standards with strict and comprehensive test and quality control systems to achieve world-class consistency and reliability. For information regarding SGMIRO orporation and its products, see

SGM9115 Triple, 9MHz, 3rd Order SDTV Video Filter Drivers

SGM9115 Triple, 9MHz, 3rd Order SDTV Video Filter Drivers Triple, 9MHz, rd Order PRODUT DESRIPTION SGM9 is a video buffer which integrates triple db Gain rail-to-rail output driver and triple rd output reconstruction filter, it has 9MHz -db bandwidth and V/µs

More information

SGM9116 Triple, 35MHz, 6th Order HDTV Video Filter Driver

SGM9116 Triple, 35MHz, 6th Order HDTV Video Filter Driver PRODUCT DESCRIPTION The SGM911 is a video buffer which integrates triple Gain rail-to-rail output driver and triple th output reconstruction filter, it has 5MHz - bandwidth and 159V/µs slew rate. SGM911

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain PRODUCT DESCRIPTION The SGM9111 is single rail-to-rail 5-pole output reconstruction filter with a -3dB bandwidth of 8MHz and a slew rate of 3.8V/µs. Operating from single supplies ranging from 3.V to 5.5V

More information

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low voltage, triple video amplifier with integrated reconstruction filters and input clamps. Specially suited for standard definition video signals, this device is

More information

SGM MHz, Triple, 6dB Video Driver

SGM MHz, Triple, 6dB Video Driver PRODUCT DESCRIPTION The SGM9117 includes triple high-speed video buffers with G = +2 in one package. Every video buffer has -db full signal bandwidth in excess of 2MHz, along with slew rates in excess

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain SGM9111 8MHz Rail-to-Rail Composite GENERAL DESCRIPTION The SGM9111 is a single rail-to-rail -pole output reconstruction filter with a -3dB bandwidth of 8MHz and 3V/µs slew rate. Operating from single

More information

Three-Channel, 5th Order, Standard Definition Video Filter Driver BL1513

Three-Channel, 5th Order, Standard Definition Video Filter Driver BL1513 Three-Channel, 5th Order, Standard Definition Video Filter Driver Description The is a low-voltage, three-channel video amplifier with integrated reconstruction and s. Specially suited for standard definition

More information

Single-Channel, 5th Order, Standard Definition Video Filter Driver BL1511B

Single-Channel, 5th Order, Standard Definition Video Filter Driver BL1511B Single-Channel, 5th Order, Standard Definition Video Filter Driver Description The is a low-voltage, single-channel video amplifier with integrated reconstruction filter and input clamps. Specially suited

More information

SGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p)

SGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p) SGM923 for SD/PS/HD (18i)/HD (18p) PRODUCT DESCRIPTION The SGM923 is a comprehensive filtering solution designed to give designers the flexibility to easily filter and drive various video signals, including

More information

SGM9154 Single Channel, Video Filter Driver for HD (1080p)

SGM9154 Single Channel, Video Filter Driver for HD (1080p) PRODUCT DESCRIPTION The SGM9154 video filter is intended to replace passive LC filters and drivers with an integrated device. The 6th-order channel offers High Definition (HDp) filter. The SGM9154 may

More information

SGM89112 Capless 3Vrms Line Driver with 8MHz 5th-Order Video Driver

SGM89112 Capless 3Vrms Line Driver with 8MHz 5th-Order Video Driver GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The also has a single rail-to-rail

More information

SGM MHz Rail-to-Rail Composite Video Driver with 6dB Gain FEATURES PRODUCT DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PIN CONFIGURATION (Top View)

SGM MHz Rail-to-Rail Composite Video Driver with 6dB Gain FEATURES PRODUCT DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PIN CONFIGURATION (Top View) SGM9 PRODUCT DESCRIPTION The SGM9 is single rail-to-rail -pole output recotruction filter with a -db bandwidth of 8MHz and a slew rate of /µs. Operating from single supplies ranging from +. to +. and sinking

More information

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when

More information

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide

More information

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,

More information

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown GENERAL DESCRIPTION The SGM4996 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. It is capable

More information

SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier

SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating

More information

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers /2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into

More information

SGM W Audio Power Amplifier with Shutdown Mode

SGM W Audio Power Amplifier with Shutdown Mode SGM487 GENERAL DESCRIPTION The SGM487 is a mono bridged audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. SGM487YPS8 is

More information

General Description Normalized Gain (db) V OUT = 2V pp Normalized Gain (db)

General Description Normalized Gain (db) V OUT = 2V pp Normalized Gain (db) Comlinear CLC Triple, Standard Definition Video Amplifier FEATURES n Integrated 4th-order, MHz filters n Integrated db video drivers n.ma total supply current n.%/.4 differential gain/phase error n DC

More information

PART MPEG DECODER 10-BIT DAC 10-BIT DAC 10-BIT DAC. Maxim Integrated Products 1

PART MPEG DECODER 10-BIT DAC 10-BIT DAC 10-BIT DAC. Maxim Integrated Products 1 19-3779; Rev 4; 1/7 EVALUATION KIT AVAILABLE Triple-Channel HDTV Filters General Description The are fully integrated solutions for filtering and buffering HDTV signals. The MAX95 operates from a single

More information

FMS6363 Low-Cost, Three-Channel, 6th-Order, High-Definition, Video Filter Driver

FMS6363 Low-Cost, Three-Channel, 6th-Order, High-Definition, Video Filter Driver FMS6363 Low-Cost, Three-Channel, 6th-Order, High-Definition, Video Filter Driver Features Three Sixth-order 30MHz (HD) Filters Transparent Input Clamping Single Video Drive Load (2Vpp, 50Ω = 6δβ) AC or

More information

SGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers

SGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers //4 0kHz,.μA, Rail-to-Rail I/O, GENERAL DESCRIPTION The (single), SGM8 (dual) and SGM84 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode

More information

SGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers /SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The (single), SGM358 (dual) and SGM324 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers.

More information

SGM mW Differential Input, Stereo Audio Power Amplifier

SGM mW Differential Input, Stereo Audio Power Amplifier SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 150ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power

More information

Three-Channel, Standard-Definition Video Filters MAX11501/MAX11502

Three-Channel, Standard-Definition Video Filters MAX11501/MAX11502 19-32; Rev 1; 4/8 EVALUATION KIT AVAILABLE Three-Channel, General Description The / integrated filters offer three channels of 5th-order filters for standard-definition video and include output buffers

More information

DATASHEET ISL Features. Applications. Ordering Information. Pinout. 8MHz Rail-to-Rail Composite Video Driver. FN6104 Rev 5.

DATASHEET ISL Features. Applications. Ordering Information. Pinout. 8MHz Rail-to-Rail Composite Video Driver. FN6104 Rev 5. DATASHEET ISL59110 8MHz Rail-to-Rail Composite Video Driver The ISL59110 is a single rail-to-rail 3-pole output reconstruction filter with a -3dB roll-off frequency of 8MHz and a slew rate of 40V/µs, with

More information

SGM W Fully Differential Audio Power Amplifier

SGM W Fully Differential Audio Power Amplifier .3W Fully Differential GENERAL DESCRIPTION The SGM4895 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile

More information

SGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE)

SGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE) SGM814 PRODUCT DESCRIPTION The SGM814 is a PIR sensor and vibration sensor analog front end which consists of 2 independent building block circuits. One is a dual rail-to-rail input and output operational

More information

Low Cost, General Purpose High Speed JFET Amplifier AD825

Low Cost, General Purpose High Speed JFET Amplifier AD825 a FEATURES High Speed 41 MHz, 3 db Bandwidth 125 V/ s Slew Rate 8 ns Settling Time Input Bias Current of 2 pa and Noise Current of 1 fa/ Hz Input Voltage Noise of 12 nv/ Hz Fully Specified Power Supplies:

More information

SGM721 SGM722 SGM723 SGM µA, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier FEATURES PRODUCT DESCRIPTION. PIN CONFIGURATIONS (Top View)

SGM721 SGM722 SGM723 SGM µA, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier FEATURES PRODUCT DESCRIPTION. PIN CONFIGURATIONS (Top View) SGM7 SGM7 SGM73 SGM74 PRODUCT DESCRIPTION The SGM7 (single), SGM7 (dual), SGM73 (single with shutdown) and SGM74 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed

More information

SGM8705 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator

SGM8705 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator SGM87 Micro-Power, CMOS Input, RRIO, 1.4V, GENERAL DESCRIPTION The SGM87 is a dual low power comparator with a typical power supply current of 3nA (per channel). It has the best-in-class power supply current

More information

SGM W Mono Fully Differential Audio Power Amplifier

SGM W Mono Fully Differential Audio Power Amplifier .3W Mono Fully Differential GENERAL DESCRIPTION The SGM4995 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile

More information

3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION

3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION GENERAL DESCRIPTION The SGM30 is a MicroPower switched capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. The SGM30 can deliver up to 00mA to

More information

SGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator

SGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator SGM871 GENERAL DESCRIPTION The SGM871 is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The

More information

SGM8554 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier

SGM8554 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier PRODUCT DESCRIPTION The SGM8554 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 45ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power consumption,

More information

Four-Channel, Standard-Definition Video Filters MAX11504/MAX11505

Four-Channel, Standard-Definition Video Filters MAX11504/MAX11505 9-57; Rev ; /7 EVALUATION KIT AVAILABLE Four-Channel, Standard-Definition General Description The integrated filters offer four channels of 5th order filters for standard-definition video and include output

More information

SON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS

SON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the

More information

SGM3127 White LED Driver with Low Dropout Current Source

SGM3127 White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low

More information

SGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier

SGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier PRODUCT DESCRIPTION The SGM8551XN is a single rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to

More information

LM6172 Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers

LM6172 Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers LM6172 Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers General Description The LM6172 is a dual high speed voltage feedback amplifier. It is unity-gain stable and provides excellent

More information

SGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch

SGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted

More information

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered

More information

SGM8584 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier

SGM8584 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier PRODUCT DESCRIPTION The SGM8584 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V

More information

SGM2021 Low Power, Low Dropout, Linear Regulators

SGM2021 Low Power, Low Dropout, Linear Regulators GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.

More information

SGM W Audio Power Amplifier

SGM W Audio Power Amplifier GENERAL DESCRIPTION The SGM489 is a.2w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable application requires

More information

SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70

SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70 GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)

More information

Dual, Current Feedback Low Power Op Amp AD812

Dual, Current Feedback Low Power Op Amp AD812 a FEATURES Two Video Amplifiers in One -Lead SOIC Package Optimized for Driving Cables in Video Systems Excellent Video Specifications (R L = ): Gain Flatness. db to MHz.% Differential Gain Error. Differential

More information

200 ma Output Current High-Speed Amplifier AD8010

200 ma Output Current High-Speed Amplifier AD8010 a FEATURES 2 ma of Output Current 9 Load SFDR 54 dbc @ MHz Differential Gain Error.4%, f = 4.43 MHz Differential Phase Error.6, f = 4.43 MHz Maintains Video Specifications Driving Eight Parallel 75 Loads.2%

More information

FMS6413. Single Channel Video Driver with Integrated Filter and Clamp. Video Features. General Description. Applications.

FMS6413. Single Channel Video Driver with Integrated Filter and Clamp. Video Features. General Description. Applications. www.fairchildsemi.com FMS6413 Single Channel Video Driver with Integrated Filter and Clamp Video Features Integrated Video Low Pass reconstruction filter Integrated output driver provides a low impedance

More information

SGM2025 Quad, Low Power, Low Dropout, 200mA, RF-Linear Regulators

SGM2025 Quad, Low Power, Low Dropout, 200mA, RF-Linear Regulators GENERAL DESCRIPTION The SGM2025 is a quad, low-power, low-dropout, CMOS linear voltage regulator that operates from 3.3V to 5.5V input and delivers up to 200mA continuous current at each channel. An ultra

More information

IS31AP2006 3W MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER. June 2017

IS31AP2006 3W MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER. June 2017 3W MONO FILTER-LESS LASS-D AUDIO POWER AMPLIFIER June 207 GENERAL DESRIPTION The is a high efficiency, 3W mono lass-d audio power amplifier. A low noise, filter-less PWM architecture eliminates the output

More information

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers GENERAL DESCRIPTION The SGM8271 (single), SGM8272 (dual) and SGM8274 (quad) are high voltage operational amplifiers that are designed to offer a wide input common mode voltage range and output voltage

More information

60V High-Speed Precision Current-Sense Amplifier

60V High-Speed Precision Current-Sense Amplifier EVALUATION KIT AVAILABLE MAX9643 General Description The MAX9643 is a high-speed 6V precision unidirectional current-sense amplifier ideal for a wide variety of power-supply control applications. Its high

More information

Very Low Distortion, Precision Difference Amplifier AD8274

Very Low Distortion, Precision Difference Amplifier AD8274 Very Low Distortion, Precision Difference Amplifier AD8274 FEATURES Very low distortion.2% THD + N (2 khz).% THD + N ( khz) Drives Ω loads Excellent gain accuracy.3% maximum gain error 2 ppm/ C maximum

More information

Single Supply, Low Power Triple Video Amplifier AD813

Single Supply, Low Power Triple Video Amplifier AD813 a FEATURES Low Cost Three Video Amplifiers in One Package Optimized for Driving Cables in Video Systems Excellent Video Specifications (R L = 15 ) Gain Flatness.1 db to 5 MHz.3% Differential Gain Error.6

More information

250mA HIGH-SPEED BUFFER

250mA HIGH-SPEED BUFFER ma HIGH-SPEED BUFFER FEATURES HIGH OUTPUT CURRENT: ma SLEW RATE: V/µs PIN-SELECTED BANDWIDTH: MHz to MHz LOW QUIESCENT CURRENT:.mA (MHz ) WIDE SUPPLY RANGE: ±. to ±V INTERNAL CURRENT LIMIT THERMAL SHUTDOWN

More information

SGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers

SGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM8925 and SGM8927 are low power, low offset voltage and rail-to-rail output voltage feedback amplifiers. They have a wide output voltage swing, and take the minimum operating

More information

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers /SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,

More information

FHP3350, FHP3450 Triple and Quad Voltage Feedback Amplifiers

FHP3350, FHP3450 Triple and Quad Voltage Feedback Amplifiers FHP335, FHP345 Triple and Quad Voltage Feedback Amplifiers Features.dB gain flatness to 3MHz.7%/.3 differential gain/phase error 2MHz full power -3dB bandwidth at G = 2,V/μs slew rate ±55mA output current

More information

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of

More information

DATASHEET EL5462. Features. Pinout. Applications. Ordering Information. 500MHz Low Power Current Feedback Amplifier. FN7492 Rev 0.

DATASHEET EL5462. Features. Pinout. Applications. Ordering Information. 500MHz Low Power Current Feedback Amplifier. FN7492 Rev 0. DATASHEET EL5462 5MHz Low Power Current Feedback Amplifier The EL5462 is a current feedback amplifier with a bandwidth of 5MHz which makes this amplifier ideal for today s high speed video and monitor

More information

LM6118/LM6218 Fast Settling Dual Operational Amplifiers

LM6118/LM6218 Fast Settling Dual Operational Amplifiers Fast Settling Dual Operational Amplifiers General Description The LM6118/LM6218 are monolithic fast-settling unity-gain-compensated dual operational amplifiers with ±20 ma output drive capability. The

More information

SGM8908 Capless 3Vrms Line Driver with Adjustable Gain

SGM8908 Capless 3Vrms Line Driver with Adjustable Gain GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal for single

More information

Low Cost 6-Channel HD/SD Video Filter ADA4420-6

Low Cost 6-Channel HD/SD Video Filter ADA4420-6 Low Cost 6-Channel HD/SD Video Filter FEATURES Sixth-order filters Transparent input sync tip clamp 1 db bandwidth of 26 MHz typical for HD HD rejection @ 75 MHz: 48 db typical NTSC differential gain:.19%

More information

High Speed, G = +2, Low Cost, Triple Op Amp ADA4862-3

High Speed, G = +2, Low Cost, Triple Op Amp ADA4862-3 High Speed,, Low Cost, Triple Op Amp ADA4862-3 FEATURES Ideal for RGB/HD/SD video Supports 8i/72p resolution High speed 3 db bandwidth: 3 MHz Slew rate: 75 V/μs Settling time: 9 ns (.5%). db flatness:

More information

KM4110/KM mA, Low Cost, +2.7V & +5V, 75MHz Rail-to-Rail Amplifiers

KM4110/KM mA, Low Cost, +2.7V & +5V, 75MHz Rail-to-Rail Amplifiers + + www.fairchildsemi.com KM411/KM41.5mA, Low Cost, +.7V & +5V, 75MHz Rail-to-Rail Amplifiers Features 55µA supply current 75MHz bandwidth Power down to I s = 33µA (KM41) Fully specified at +.7V and +5V

More information

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/doublethrow (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer

More information

2.5V Video Amplifier with Reconstruction Filter

2.5V Video Amplifier with Reconstruction Filter 19-3674; Rev ; 5/5 2.5V Video Amplifier with Reconstruction Filter General Description The small, low-power video amplifier with integrated reconstruction filter operates from a supply voltage as low as

More information

250 MHz, General Purpose Voltage Feedback Op Amps AD8047/AD8048

250 MHz, General Purpose Voltage Feedback Op Amps AD8047/AD8048 5 MHz, General Purpose Voltage Feedback Op Amps AD8/AD88 FEATURES Wide Bandwidth AD8, G = + AD88, G = + Small Signal 5 MHz 6 MHz Large Signal ( V p-p) MHz 6 MHz 5.8 ma Typical Supply Current Low Distortion,

More information

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820 a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from + V to + V Dual Supply Capability from. V to 8 V Excellent Load

More information

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch

More information

SGM3127 White LED Driver with Low Dropout Current Source

SGM3127 White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low

More information

TOP VIEW. HD Recorders TSSOP

TOP VIEW. HD Recorders TSSOP 9-446; Rev ; /8 EVALUATION KIT AVAILABLE Low-Cost, -Channel, HD/PS/SD/BP General Description The / integrated -channel video filters for high-definition (HD), progressive-scan (PS), standard-definition

More information

SGM89000 Capless 2Vrms Line Driver with Adjustable Gain

SGM89000 Capless 2Vrms Line Driver with Adjustable Gain GENERAL DESCRIPTION The SGM89000 is a 2Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal

More information

Single-Supply, High Speed, Triple Op Amp with Charge Pump ADA4858-3

Single-Supply, High Speed, Triple Op Amp with Charge Pump ADA4858-3 Single-Supply, High Speed, Triple Op Amp with Charge Pump FEATURES Integrated charge pump Supply range: 3 V to 5.5 V Output range: 3.3 V to.8 V 5 ma maximum output current for external use at 3 V High

More information

Rail-to-Rail, High Output Current Amplifier AD8397

Rail-to-Rail, High Output Current Amplifier AD8397 Rail-to-Rail, High Output Current Amplifier FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails High linear

More information

SGM2576/SGM2576B Power Distribution Switches

SGM2576/SGM2576B Power Distribution Switches /B GENERAL DESCRIPTION The and B are integrated typically 100mΩ power switch for self-powered and bus-powered Universal Series Bus (USB) applications. The and B integrate programmable current limiting

More information

LMV761/LMV762 Low Voltage, Precision Comparator with Push-Pull Output

LMV761/LMV762 Low Voltage, Precision Comparator with Push-Pull Output LMV761/LMV762 Low Voltage, Precision Comparator with Push-Pull Output General Description The LMV761/762 are precision comparators intended for applications requiring low noise and low input offset voltage.

More information

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820 a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from V to V Dual Supply Capability from. V to 8 V Excellent Load Drive

More information

MIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp

MIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp MIC915 Dual 135MHz Low-Power Op Amp General Description The MIC915 is a high-speed, unity-gain stable operational amplifier. It provides a gain-bandwidth product of 135MHz with a very low, 2.4mA supply

More information

Low Noise 300mA LDO Regulator General Description. Features

Low Noise 300mA LDO Regulator General Description. Features Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio

More information

FMS Input, 6-Output Video Switch Matrix with Output Drivers, Input Clamp, and Bias Circuitry

FMS Input, 6-Output Video Switch Matrix with Output Drivers, Input Clamp, and Bias Circuitry January 2007 8-Input, 6-Output Video Switch Matrix with Output Drivers, Input Clamp, and Bias Circuitry Features 8 x 6 Crosspoint Switch Matrix Supports SD, PS, and HD 1080i / 1080p Video Input Clamp and

More information

Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820

Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5

More information

Dual, Low Power Video Op Amp AD828

Dual, Low Power Video Op Amp AD828 a FEATURES Excellent Video Performance Differential Gain and Phase Error of.% and. High Speed MHz db Bandwidth (G = +) V/ s Slew Rate ns Settling Time to.% Low Power ma Max Power Supply Current High Output

More information

Single Supply, Low Power, Triple Video Amplifier AD8013

Single Supply, Low Power, Triple Video Amplifier AD8013 a FEATURES Three Video Amplifiers in One Package Drives Large Capacitive Load Excellent Video Specifications (R L = 5 ) Gain Flatness. db to MHz.% Differential Gain Error. Differential Phase Error Low

More information

EC5462A High Slew Rate Rail-to-Rail Dual Operational Amplifiers

EC5462A High Slew Rate Rail-to-Rail Dual Operational Amplifiers Introduction (General Description) The EC5462A is a rail-to-rail dual channels operational amplifier with wide supply range from 4.5V to 18V. It provides 0.5V beyond the supply rails of common mode input

More information

Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD8276

Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD8276 Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD87 FEATURES Wide input range Rugged input overvoltage protection Low supply current: μa maximum Low power dissipation:. mw at VS

More information

Improved Second Source to the EL2020 ADEL2020

Improved Second Source to the EL2020 ADEL2020 Improved Second Source to the EL ADEL FEATURES Ideal for Video Applications.% Differential Gain. Differential Phase. db Bandwidth to 5 MHz (G = +) High Speed 9 MHz Bandwidth ( db) 5 V/ s Slew Rate ns Settling

More information

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2 AD8278/AD8279

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2 AD8278/AD8279 Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2 /AD8279 FEATURES Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 2 μa maximum (per amplifier)

More information

SGM mA Buck/Boost Charge Pump LED Driver

SGM mA Buck/Boost Charge Pump LED Driver GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for Flash

More information

SGM706 Low-Cost, Microprocessor Supervisory Circuit

SGM706 Low-Cost, Microprocessor Supervisory Circuit GENERAL DESCRIPTION The microprocessor supervisory circuit reduces the complexity and number of components required to monitor power-supply and monitor microprocessor activity. It significantly improves

More information

SGM3736 PWM Dimming, 38V Step-Up LED Driver

SGM3736 PWM Dimming, 38V Step-Up LED Driver GENERAL DESCRIPTION The SGM3736 is a versatile constant current LED driver with a high efficiency step-up converter architecture. The low-side power MOSFET is integrated in the device, significantly shrinking

More information

380 MHz, 25 ma, Triple 2:1 Multiplexers AD8183/AD8185

380 MHz, 25 ma, Triple 2:1 Multiplexers AD8183/AD8185 a FEATURES Fully Buffered Inputs and Outputs Fast Channel-to-Channel Switching: 5 ns High Speed 38 MHz Bandwidth ( 3 db) 2 mv p-p 3 MHz Bandwidth ( 3 db) 2 V p-p V/ s Slew Rate G = +, 2 V Step 5 V/ s Slew

More information

High Output Current Differential Driver AD815

High Output Current Differential Driver AD815 a FEATURES Flexible Configuration Differential Input and Output Driver or Two Single-Ended Drivers Industrial Temperature Range High Output Power Thermally Enhanced SOIC 4 ma Minimum Output Drive/Amp,

More information

LM321 Low Power Single Op Amp

LM321 Low Power Single Op Amp Low Power Single Op Amp General Description The LM321 brings performance and economy to low power systems. With a high unity gain frequency and a guaranteed 0.4V/µs slew rate, the quiescent current is

More information