PART MPEG DECODER 10-BIT DAC 10-BIT DAC 10-BIT DAC. Maxim Integrated Products 1

Size: px
Start display at page:

Download "PART MPEG DECODER 10-BIT DAC 10-BIT DAC 10-BIT DAC. Maxim Integrated Products 1"

Transcription

1 ; Rev 4; 1/7 EVALUATION KIT AVAILABLE Triple-Channel HDTV Filters General Description The are fully integrated solutions for filtering and buffering HDTV signals. The MAX95 operates from a single +5V supply, while the MAX951 operates from dual ±5V supplies. The MAX95/ MAX951 triple-channel video reconstruction filters are both gain and delay matched and are ideal for use in set-top boxes, DVD players, and other equipment that generate analog HDTV outputs. The interface between the currentoutput, digital-to-analog converters (DAC) of an Advanced Television Standard Committee (ATSC), Motion Picture Experts Group (MPEG) decoder and the external connections of a television, set-top box, or DVD player. The feature a DC-coupled input with very low input capacitance and high resistance. The highly selective lowpass filters remove spectral replicas at the output of the DAC. The output amplifier has +6dB of gain to drive 75Ω back-terminated loads to unity gain. The DC-coupled input eliminates problems such as sync crush, droop, and field tilt. The output load can be DC- or AC-coupled, depending on the application. All three channels in the have the same frequency response with matched group delay and gain. The filter response meets the requirements of the EIA-77.3/SMPTE 274M filter template achieving > 4dB attenuation at 44.25MHz. The can also be used as an antialiasing filter for HDTV component inputs. The are available in compact 16-pin QSOP packages and are fully specified over the -4 C to +85 C extended temperature range. Applications Cable and Satellite Set-Top Box Receivers A/V Receivers Home Theater Systems HDTV Sets DVD Players Video Projectors Digital Displays Features 3MHz Bandwidth at ±1.5dB Extremely Sharp Rolloff, Lowpass Filters -5dB at 44.25MHz DC-Coupled Inputs; AC- or DC-Coupled Outputs ±5V Dual Supply (MAX951) 5V Single Supply (MAX95) Matched Group Delay and Gain Drive Single/Double Back-Terminated Loads (15Ω/75Ω) Directly to Ground Sink and Source Output Current High Input Impedance to Interface to Low Output- Current DAC 16-Pin QSOP Package PART Ordering Information PIN- PACKAGE SUPPLY VOLTAGE (V) PKG CODE MAX95EEE+ 16 QSOP +5 E16-8F MAX951EEE+ 16 QSOP ±5 E16-8F +Denotes lead-free package. Note: All devices are specified over the -4 C to +85 C operating temperature range. MPEG DECODER -BIT DAC -BIT DAC -BIT DAC Typical Operating Circuit 15Ω 15Ω YIN PbIN PrIN MAX95 MAX951 LPF LPF LPF V CC +6dB +6dB +6dB.1µF YOUT PbOUT PrOUT 75Ω 75Ω 75Ω Pin Configurations appear at end of data sheet. 15Ω SUBG (MAX95).1µF VEE (MAX951) Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at

2 MAX95/951/MAX951 ABSOLUTE MAXIMUM RATINGS Positive Supply Voltage (V CC to )...-.3V to +6V Negative Supply Voltage (MAX951) (V EE to )...+.3V to -6V All Input Pins...-.3V to (V CC +.3V) All Output Pins (MAX95)...-.3V to (V CC +.3V) All Output Pins (MAX951)...(V EE -.3V) to +3V Output Short-Circuit Duration (OUT to V CC or ) (MAX95)...s Output Short-Circuit Duration (OUT to or V EE ) (MAX951)...s Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS MAX95 (Single Supply) Continuous Input Current (YIN, PbIN, PrIN)...±2mA Continuous Power Dissipation (T A = +7 C) 16-Pin QSOP (derate 12.8mW/ C above +7 C)...25mW Operating Temperature Range...-4 C to +85 C Junction Temperature C Storage Temperature Range C to +15 C Lead Temperature (soldering, s)...+3 C (V CC = 5V, R L =, T A = T MIN to T MAX, unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS DC CHARACTERISTICS Supply Voltage Range V CC Guaranteed by PSRR V Quiescent Supply Current (Per Channel) I CC ma Input Voltage Range V IN Guaranteed by voltage gain 1.4 V Voltage Gain A V V IN = to 1.4V R L = 15Ω to R L = 15Ω to 2V R L = 75Ω to R L = 75Ω to 2V Gain Matching A V Any two channels db Input Bias Current I B V IN = V 4 µa Input Resistance R IN V IN = to 1.4V 25 8 kω Output Offset Voltage V OS V IN = V V Power-Supply Rejection Ratio PSRR V CC = 4.5V to 5.5V, V IN = 1.4V 3 6 db AC CHARACTERISTICS (R L = 15Ω to, unless otherwise noted) Passband Flatness A PB f =.1MHz to 3MHz, V IN = 1V P-P, T A = +25 C db ±3. ±1.5 db f = 44.25MHz, V IN = 1V P-P, T A = +25 C 4 51 db Attenuation A SB f = 74.25MHz, V IN = 1V P-P 38 db Settling Time t S V IN = 1V P-P, V OUT < 1% 15 ns Slew Rate SR V IN = 1V P-P V/µs Bar Response BR Bar time is one-half the active line of a 8i format signal; the beginning 2.5% and the ending 2.5% of the bar time is ignored.4 K% 2

3 ELECTRICAL CHARACTERISTICS MAX95 (Single Supply) (continued) (V CC = 5V, R L =, T A = T MIN to T MAX, unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Nonlinearity NL 5-step staircase.4 % Channel Delay t D Difference in time between the 5% point of the output signals, Y to Pb and Y to Pr Group Delay Group-Delay Variation Channel-to-Channel Group-Delay Matching GD GD GD CH-CH < 1 ns khz f 2MHz, V YOUT = V PbOUT = V PrOUT = 2V P-P 26 ns khz f 2MHz, V YOUT = V PbOUT = V PrOUT = 2V P-P < ns V YOUT = V PbOUT = V PrOUT = 2V P-P, Y to Pb and Y to Pr, 1MHz f 2MHz.2 ns Peak Signal-to-RMS Noise SNR khz f 2MHz, V IN = 1V P-P 6 db Power-Supply Rejection Ratio PSRR AC f = khz, V RIPPLE = 2mV P-P 6 db Output Impedance Z O f = 3MHz 8 Ω Input Capacitance C IN 1 pf Capacitive-Load Drive C L No sustained oscillations 25 pf ELECTRICAL CHARACTERISTICS MAX951 (Dual Supply) (V CC = 5V, V EE = -5V, R L =, T A = T MIN to T MAX, unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS DC CHARACTERISTICS Positive Supply Voltage Range V CC Guaranteed by PSRR V Negative Supply Voltage Range V EE Guaranteed by PSRR V V CC Quiescent Supply Current (Per Channel) I CC ma V EE Supply Current (Per Channel) I EE 6 9 ma Input Voltage Range V IN Guaranteed by voltage gain 1.4 V Voltage Gain A V V IN = to 1.4V R L = 15Ω to db R L = 75Ω to Gain Matching A V Any two channels db Input Bias Current I B V IN = V 4 µa Input Resistance R IN V IN = to 1.4V 25 8 kω Output Offset Voltage V OS V IN = V V Power-Supply Rejection Ratio PSRR V CC = 4.5V to 5.5V, V IN = 1.4V, V EE = -4.5V to -5.5V 4 6 db 3

4 ELECTRICAL CHARACTERISTICS MAX951 (Dual Supply) (continued) (V CC = 5V, V EE = -5V, R L =, T A = T MIN to T MAX, unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS AC CHARACTERISTICS (R L = 15Ω to, unless otherwise noted) Passband Flatness A PB f =.1MHz to 3MHz, V IN = 1V P-P, T A = +25 C ±4. ±1.5 db f = 44.25MHz, V IN = 1V P-P, T A = +25 C db Attenuation A SB f = 74.25MHz, V IN = 1V P-P 38 db Settling Time t S V IN = 1V P-P, V OUT < 1% 15 ns Slew Rate SR V IN = 1V P-P V/µs Bar Response BR Bar time is one-half the active line of a 8i format signal; the beginning 2.5% and the ending 2.5% of the bar time is ignored.4 K% Nonlinearity NL 5-step staircase.4 % Channel Delay t D Difference in time between the 5% point of the output signals, Y to Pb and Y to Pr < 1 ns Group Delay Group-Delay Variation GD GD khz f 2MHz, V YOUT = V PbOUT = V PrOUT = 2V P-P 25 ns khz f 2MHz, V YOUT = V PbOUT = V PrOUT = 2V P-P < ns Channel-to-Channel Group-Delay Matching GD CH-CH V YOUT = V PbOUT = V PrOUT = 2V P-P, Y to Pb and Y to Pr, 1MHz f 2MHz.6 ns Peak Signal-to-RMS Noise SNR khz f 2MHz, V IN = 1V P-P 6 db Power-Supply Rejection Ratio PSRR AC f = khz, V RIPPLE = 2mV P-P 6 db Output Impedance Z O f = 3MHz 8 Ω Input Capacitance C IN 1 pf Capacitive-Load Drive C L No sustained oscillations 25 pf Note 1: All specifications are % tested at T A = +25 C; temperature limits are guaranteed by design. 4

5 (V CC = 5V, R L = 15Ω to, T A = +25 C, unless otherwise noted.) MAX95 FREQUENCY RESPONSE -5 VIN = 1VP-P MAX95/1 toc1 MAX95 PASSBAND FLATNESS V IN = 1V P-P Typical Operating Characteristics MAX95/1 toc2 DELAY (ns) MAX95 GROUP DELAY MAX95/1 toc3 NORMALIZED AMPLITUDE.1 1%.5%.5% 1% MAX95 K2T MEASUREMENT VIN =.7V 2T = 33ns t/2t MAX5/1 toc4 MAX95 VIDEO CROSSTALK - V IN = 1V P-P ANY CHANNEL TO Y ANY CHANNEL TO Pb OR Pr MAX95/1 toc MAX951 FREQUENCY RESPONSE -5 VIN = 1VP-P MAX95/1 toc6 MAX951 PASSBAND FLATNESS 2. VIN = 1VP-P MAX95/1 toc7 DELAY (ns) MAX951 GROUP DELAY MAX95/1 toc8 5

6 Typical Operating Characteristics (continued) (V CC = 5V, R L = 15Ω to, T A = +25 C, unless otherwise noted.) NORMALIZED AMPLITUDE.1 MAX951 K2T MEASUREMENT 1% 1%.5%.5%.5% 1% VIN =.7V 2T = 33ns t/2t MAX5/1 toc9 MAX951 VIDEO CROSSTALK - V IN = 1V P-P ANY CHANNEL TO Pb OR Pr ANY CHANNEL TO Y MAX95/1 toc MAX951 VEE POWER-SUPPLY REJECTION RATIO - 1k k k 1M M M FREQUENCY (Hz) MAX95/1 toc11 SUPPLY CURRENT (ma) MAX951 VEE SUPPLY CURRENT vs. TEMPERATURE TEMPERATURE ( C) SUPPLY CURRENT (ma) MAX95/1 toc VCC SUPPLY CURRENT vs. TEMPERATURE TEMPERATURE ( C) V CC POWER-SUPPLY REJECTION RATIO - 1k k k 1M M M FREQUENCY (Hz) MAX95/1 toc15 IMPEDANCE (Ω) MAX95/1 toc13 SIGNAL-TO-NOISE RATIO vs. FREQUENCY V IN = 1V P-P OUTPUT IMPEDANCE vs. FREQUENCY.1 1 MAX95/1 toc16 MAX95/1 toc14 6

7 MAX95 1, 7, 8, 9, 16 PIN MAX951 NAME SUBG Pin Description FUNCTION Substrate Ground. Connect to ground. 2 2 YIN Y Channel Input 3, 5 3, 5 Ground 4 4 PbIN Pb Channel Input 6 6 PrIN Pr Channel Input PrOUT Pr Channel Output 11, 13, 15 11, 13, 15 V CC Positive Supply PbOUT Pb Channel Output YOUT Y Channel Output 1, 7, 8, 9, 16 V EE Negative Supply Detailed Description The are fully integrated solutions for filtering and buffering HDTV signals. The MAX95 operates from a single +5V supply, while the MAX951 operates from dual ±5V supplies. The MAX95/ MAX951 interface between the current-output DACs of an ATSC, MPEG decoder, and the external connections of a television, set-top box, or DVD player. The feature a DC-coupled input buffer with very low input capacitance, highly selective lowpass filters to remove out-of-band noise, and a gain of +6dB in the output amplifier to drive 75Ω back-terminated loads to unity gain. The DC-coupled input buffer eliminates sync crush, droop, and field tilt. The output load can be DC- or AC-coupled. Filter The reconstruction filters feature a 6th-order elliptical response, providing a 1.5dB flat passband response up to 3MHz. The filter meets the selectivity requirements of the EIA-77.3/SMPTE 274M filtering template, achieving > 4dB attenuation at 44.25MHz. The can also be used as anti-aliasing filters for HDTV component inputs. Output Buffer The output buffers provide +6dB of gain and can drive 2VP-P into a single or double back-terminated load (15Ω or 75Ω, respectively) directly to ground. The output can be AC-coupled or DC-coupled. Applications Information Input Considerations The inputs are normally DC-coupled. No AC-coupling capacitors are required because the input voltage range includes ground and extends up to 1.4V, allowing the to be directly connected to the output of a single-supply, current-output DAC without any external bias network. The inputs can be AC-coupled. Use a fixed bias or video clamp to set the DC bias to ensure that the negative peak of the video signal is as near to V as possible. A video clamp is preferred because it limits the total swing of the signal and holds the blanking level constant. Output Considerations The outputs are normally DC-coupled, so no AC-coupling capacitors are required. For V input, the MAX95 output voltage is.8v and the MAX951 output voltage is V, typical. Connect the directly to a video cable with a 75Ω series back-termination resistor to match the impedance of the cable. Properly terminate the other end of the cable with a 75Ω load. The outputs can sink and source current allowing the device to be AC-coupled. However, AC-coupling the outputs will degrade the tilt. Power-Supply Bypassing and Layout Considerations The MAX95 operates from a single +5V supply while the MAX951 operates from dual ±5V supplies. Bypass V CC and V EE (MAX951) to with a.1µf capacitor as close to the device as possible, and an additional 1µF capacitor in parallel if any significant low-frequency disturbances are present in the vicinity of the. Use an extensive ground plane to ensure optimum performance. The input and output termination resistors should be placed as close to the device as possible to avoid performance degradation in the frequency response. The PC board traces at the output should have 75Ω characteristic impedance when matching into a 75Ω characteristic impedance cable. Keep the board trace at the inputs and outputs of the as short as possible to minimize the parasitic stray capacitance and noise pickup. 7

8 TOP VIEW SUBG YIN PbIN PrIN SUBG SUBG MAX95 QSOP 16 SUBG 15 V CC 14 YOUT 13 V CC 12 PbOUT 11 V CC PrOUT 9 SUBG V EE YIN PbIN PrIN V EE V EE Pin Configurations 16 VEE 15 V CC 14 YOUT MAX V CC 12 PbOUT 11 V CC PrOUT 9 V EE QSOP PROCESS: Bipolar Chip Information 8

9 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to QSOP.EPS PACKAGE OUTLINE, QSOP.15",.25" LEAD PITCH F 1 1 Revision History Pages changed at Rev 4: 1, 2, 3, 9 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 12 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. Quijano

2.5V Video Amplifier with Reconstruction Filter

2.5V Video Amplifier with Reconstruction Filter 19-3674; Rev ; 5/5 2.5V Video Amplifier with Reconstruction Filter General Description The small, low-power video amplifier with integrated reconstruction filter operates from a supply voltage as low as

More information

Three-Channel, Standard-Definition Video Filters MAX11501/MAX11502

Three-Channel, Standard-Definition Video Filters MAX11501/MAX11502 19-32; Rev 1; 4/8 EVALUATION KIT AVAILABLE Three-Channel, General Description The / integrated filters offer three channels of 5th-order filters for standard-definition video and include output buffers

More information

Four-Channel, Standard-Definition Video Filters MAX11504/MAX11505

Four-Channel, Standard-Definition Video Filters MAX11504/MAX11505 9-57; Rev ; /7 EVALUATION KIT AVAILABLE Four-Channel, Standard-Definition General Description The integrated filters offer four channels of 5th order filters for standard-definition video and include output

More information

TOP VIEW. HD Recorders TSSOP

TOP VIEW. HD Recorders TSSOP 9-446; Rev ; /8 EVALUATION KIT AVAILABLE Low-Cost, -Channel, HD/PS/SD/BP General Description The / integrated -channel video filters for high-definition (HD), progressive-scan (PS), standard-definition

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

SGM9116 Triple, 35MHz, 6th Order HDTV Video Filter Driver

SGM9116 Triple, 35MHz, 6th Order HDTV Video Filter Driver PRODUCT DESCRIPTION The SGM911 is a video buffer which integrates triple Gain rail-to-rail output driver and triple th output reconstruction filter, it has 5MHz - bandwidth and 159V/µs slew rate. SGM911

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

Single-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps

Single-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps 9-; Rev ; /8 Single-Supply, 5MHz, 6-Bit Accurate, General Description The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 6- bit settling time in 3ns, and

More information

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low voltage, triple video amplifier with integrated reconstruction filters and input clamps. Specially suited for standard definition video signals, this device is

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain PRODUCT DESCRIPTION The SGM9111 is single rail-to-rail 5-pole output reconstruction filter with a -3dB bandwidth of 8MHz and a slew rate of 3.8V/µs. Operating from single supplies ranging from 3.V to 5.5V

More information

Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz

Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz 19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.

More information

MAX9503 PIN- PACKAGE MAX9503GEEE 16 QSOP E16-4 MAX9503GETE 16 TQFN T ACU MAX9503MEEE 16 QSOP E16-4 MAX9503METE 16 TQFN T ACV * PART*

MAX9503 PIN- PACKAGE MAX9503GEEE 16 QSOP E16-4 MAX9503GETE 16 TQFN T ACU MAX9503MEEE 16 QSOP E16-4 MAX9503METE 16 TQFN T ACV * PART* 19-676; Rev 1; 8/5 EVALUATION KIT AVAILABLE ± PART* PIN- PACKAGE PKG CODE TOP MARK GEEE 16 QSOP E16- GETE 16 TQFN T16- ACU MEEE 16 QSOP E16- METE 16 TQFN T16- ACV * TO 5mV -.1V TO +.1V BUFFER LOWPASS FILTER

More information

1.0V Micropower, SOT23, Operational Amplifier

1.0V Micropower, SOT23, Operational Amplifier 19-3; Rev ; 1/ 1.V Micropower, SOT3, Operational Amplifier General Description The micropower, operational amplifier is optimized for ultra-low supply voltage operation. The amplifier consumes only 9µA

More information

6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable

6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable 99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain SGM9111 8MHz Rail-to-Rail Composite GENERAL DESCRIPTION The SGM9111 is a single rail-to-rail -pole output reconstruction filter with a -3dB bandwidth of 8MHz and 3V/µs slew rate. Operating from single

More information

Three-Channel, 5th Order, Standard Definition Video Filter Driver BL1513

Three-Channel, 5th Order, Standard Definition Video Filter Driver BL1513 Three-Channel, 5th Order, Standard Definition Video Filter Driver Description The is a low-voltage, three-channel video amplifier with integrated reconstruction and s. Specially suited for standard definition

More information

Rail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP

Rail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP 19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered

More information

Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs

Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 9-5; Rev 4; /9 Ultra-Small, Low-Cost, MHz, Single-Supply General Description The MAX445 single and MAX445 dual op amps are unity-gain-stable devices that combine high-speed performance with rail-to-rail

More information

1-Input/4-Output Video Distribution Amplifiers MAX4137/MAX4138

1-Input/4-Output Video Distribution Amplifiers MAX4137/MAX4138 -00; Rev 0; / EVALUATION KIT AVAILABLE General Description The / are -input/-output voltagefeedback amplifiers that combine high speed with fast switching for video distribution applications. The is internally

More information

+2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs

+2.7V to +5.5V, Low-Power, Triple, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs 19-1560; Rev 1; 7/05 +2.7V to +5.5V, Low-Power, Triple, Parallel General Description The parallel-input, voltage-output, triple 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V

More information

TOP VIEW. Maxim Integrated Products 1

TOP VIEW. Maxim Integrated Products 1 9-987; Rev ; 9/3 5MHz, Triple, -Channel Video General Description The is a triple, wideband, -channel, noninverting gain-of-two video amplifier with input multiplexing, capable of driving up to two back-terminated

More information

V CC OUT MAX9945 IN+ V EE

V CC OUT MAX9945 IN+ V EE 19-4398; Rev ; 2/9 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs

More information

SGM MHz, Triple, 6dB Video Driver

SGM MHz, Triple, 6dB Video Driver PRODUCT DESCRIPTION The SGM9117 includes triple high-speed video buffers with G = +2 in one package. Every video buffer has -db full signal bandwidth in excess of 2MHz, along with slew rates in excess

More information

PART. Maxim Integrated Products 1

PART. Maxim Integrated Products 1 - + 9-; Rev ; / Low-Cost, High-Slew-Rate, Rail-to-Rail I/O Op Amps in SC7 General Description The MAX9/MAX9/MAX9 single/dual/quad, low-cost CMOS op amps feature Rail-to-Rail input and output capability

More information

IF Digitally Controlled Variable-Gain Amplifier

IF Digitally Controlled Variable-Gain Amplifier 19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The

More information

60V High-Speed Precision Current-Sense Amplifier

60V High-Speed Precision Current-Sense Amplifier EVALUATION KIT AVAILABLE MAX9643 General Description The MAX9643 is a high-speed 6V precision unidirectional current-sense amplifier ideal for a wide variety of power-supply control applications. Its high

More information

V CC OUT MAX9945 IN+ V EE

V CC OUT MAX9945 IN+ V EE 19-4398; Rev 1; 12/ 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs

More information

Precision, High-Bandwidth Op Amp

Precision, High-Bandwidth Op Amp EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage

More information

MAX4267EUA -40 C to +85 C 8 µmax. MAX4268EEE -40 C to +85 C 16 QSOP. MAX4270EEE -40 C to +85 C 16 QSOP

MAX4267EUA -40 C to +85 C 8 µmax. MAX4268EEE -40 C to +85 C 16 QSOP. MAX4270EEE -40 C to +85 C 16 QSOP 9; Rev ; 8/ Ultra-Low-Distortion, +V, MHz Op Amps with Disable General Description The MAX6 MAX7 ultra-low distortion, voltage-feedback op amps are capable of driving a Ω load while maintaining ultra-low

More information

Dual-Rate Fibre Channel Repeaters

Dual-Rate Fibre Channel Repeaters 9-292; Rev ; 7/04 Dual-Rate Fibre Channel Repeaters General Description The are dual-rate (.0625Gbps and 2.25Gbps) fibre channel repeaters. They are optimized for use in fibre channel arbitrated loop applications

More information

Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output

Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output 19-1548; Rev 3; 12/5 Low-Cost, UCSP/SOT23, Micropower, High-Side General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package.

More information

Single-Channel, 5th Order, Standard Definition Video Filter Driver BL1511B

Single-Channel, 5th Order, Standard Definition Video Filter Driver BL1511B Single-Channel, 5th Order, Standard Definition Video Filter Driver Description The is a low-voltage, single-channel video amplifier with integrated reconstruction filter and input clamps. Specially suited

More information

Low-Voltage, 1.8kHz PWM Output Temperature Sensors

Low-Voltage, 1.8kHz PWM Output Temperature Sensors 19-266; Rev 1; 1/3 Low-Voltage, 1.8kHz PWM Output Temperature General Description The are high-accuracy, low-power temperature sensors with a single-wire output. The convert the ambient temperature into

More information

PART MAX4144ESD MAX4146ESD. Typical Application Circuit. R t IN- IN+ TWISTED-PAIR-TO-COAX CABLE CONVERTER

PART MAX4144ESD MAX4146ESD. Typical Application Circuit. R t IN- IN+ TWISTED-PAIR-TO-COAX CABLE CONVERTER 9-47; Rev ; 9/9 EVALUATION KIT AVAILABLE General Description The / differential line receivers offer unparalleled high-speed performance. Utilizing a threeop-amp instrumentation amplifier architecture,

More information

Precision, Low-Power and Low-Noise Op Amp with RRIO

Precision, Low-Power and Low-Noise Op Amp with RRIO MAX41 General Description The MAX41 is a low-power, zero-drift operational amplifier available in a space-saving, 6-bump, wafer-level package (WLP). Designed for use in portable consumer, medical, and

More information

Precision, Micropower, 1.8V Supply, Low-Dropout, SOT23 Voltage Reference

Precision, Micropower, 1.8V Supply, Low-Dropout, SOT23 Voltage Reference 19-2211; Rev 2; 12/2 Precision, Micropower, 1.8V Supply, General Description The is a precision, low-voltage, low-dropout, micropower voltage reference in a SOT23 package. This three-terminal reference

More information

1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise Transimpedance Preamplifiers for LANs

1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise Transimpedance Preamplifiers for LANs 19-4796; Rev 1; 6/00 EVALUATION KIT AVAILABLE 1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise General Description The is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers.

More information

PART. MAX7421CUA 0 C to +70 C 8 µmax INPUT CLOCK

PART. MAX7421CUA 0 C to +70 C 8 µmax INPUT CLOCK 19-181; Rev ; 11/ 5th-Order, Lowpass, General Description The MAX718 MAX75 5th-order, low-pass, switchedcapacitor filters (SCFs) operate from a single +5 (MAX718 MAX71) or +3 (MAX7 MAX75) supply. These

More information

Not Recommended for New Designs

Not Recommended for New Designs Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains

More information

Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps

Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps 9-; Rev 4; 7/ Single/Dual/Quad, +.8V/75nA, SC7, General Description The MAX4464/MAX447/MAX447/MAX447/MAX4474 family of micropower op amps operate from a single +.8V to +5.5V supply and draw only 75nA of

More information

MAX9812/MAX9813 Tiny, Low-Cost, Single/Dual-Input, Fixed-Gain Microphone Amplifiers with Integrated Bias

MAX9812/MAX9813 Tiny, Low-Cost, Single/Dual-Input, Fixed-Gain Microphone Amplifiers with Integrated Bias General Description The MAX982/MAX983 are single/dual-input, 20dB fixed-gain microphone amplifiers. They offer tiny packaging and a low-noise, integrated microphone bias, making them ideal for portable

More information

Low-Power, Precision, 4-Bump WLP, Current-Sense Amplifier

Low-Power, Precision, 4-Bump WLP, Current-Sense Amplifier EVALUATION KIT AVAILABLE General Description The is a zero-drift, high-side current-sense amplifier family that offers precision, low supply current and is available in a tiny 4-bump ultra-thin WLP of

More information

+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable

+3V/+5V, 250MHz, SOT23 ADC Buffer Amplifiers with High-Speed Disable 9-5; Rev ; / +V/+5V, 5MHz, SOT ADC Buffer Amplifiers General Description The MAX85/MAX86 single and MAX87/MAX88/ MAX87/MAX88 dual ADC buffer amplifiers feature high-speed performance and single +V supply

More information

Maxim Integrated Products 1

Maxim Integrated Products 1 19-248; Rev ; 4/1 Low-Cost, SC7, Voltage-Output, General Description The MAX473 low-cost, high-side current-sense amplifier features a voltage output that eliminates the need for gain-setting resistors

More information

EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp

EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp 19-227; Rev ; 9/1 EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp General Description The op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device

More information

27pF TO ADC C FILTER (OPTIONAL) Maxim Integrated Products 1

27pF TO ADC C FILTER (OPTIONAL) Maxim Integrated Products 1 19-215; Rev 6; 9/6 EVALUATION KIT AVAILABLE RF Power Detectors in UCSP General Description The wideband (8MHz to 2GHz) power detectors are ideal for GSM/EDGE (MAX226), TDMA (MAX227), and CDMA (MAX225/MAX228)

More information

nanopower Op Amp in a Tiny 6-Bump WLP

nanopower Op Amp in a Tiny 6-Bump WLP EVALUATION KIT AVAILABLE MAX4464 General Description The MAX4464 is an ultra-small (6-bump WLP) op amp that draws only 75nA of supply current. It operates from a single +.8V to +5.5V supply and features

More information

3V/5V, 6dB Video Buffer with Sync-Tip Clamp and 150nA Shutdown Current

3V/5V, 6dB Video Buffer with Sync-Tip Clamp and 150nA Shutdown Current General Description The MAX49 3V/5V, 6dB video buffer with sync-tip clamp, and low-power shutdown mode is available in tiny SOT23, SC7, and µdfn packages. The MAX49 is designed to drive DC-coupled, 15Ω

More information

SGM9115 Triple, 9MHz, 3rd Order SDTV Video Filter Drivers

SGM9115 Triple, 9MHz, 3rd Order SDTV Video Filter Drivers Triple, 9MHz, rd Order PRODUT DESRIPTION SGM9 is a video buffer which integrates triple db Gain rail-to-rail output driver and triple rd output reconstruction filter, it has 9MHz -db bandwidth and V/µs

More information

Dual, Audio, Log Taper Digital Potentiometers

Dual, Audio, Log Taper Digital Potentiometers 19-2049; Rev 3; 1/05 Dual, Audio, Log Taper Digital Potentiometers General Description The dual, logarithmic taper digital potentiometers, with 32-tap points each, replace mechanical potentiometers in

More information

Low-Power, Low-Drift, +2.5V/+5V/+10V Precision Voltage References

Low-Power, Low-Drift, +2.5V/+5V/+10V Precision Voltage References 19-38; Rev 3; 6/7 Low-Power, Low-Drift, +2.5V/+5V/+1V General Description The precision 2.5V, 5V, and 1V references offer excellent accuracy and very low power consumption. Extremely low temperature drift

More information

Receiver for Optical Distance Measurement

Receiver for Optical Distance Measurement 19-47; Rev ; 7/9 EVALUATION KIT AVAILABLE Receiver for Optical Distance Measurement General Description The is a high-gain linear preamplifier for distance measurement applications using a laser beam.

More information

MAX2387/MAX2388/MAX2389

MAX2387/MAX2388/MAX2389 19-13; Rev 1; /1 EVALUATION KIT AVAILABLE W-CDMA LNA/Mixer ICs General Description The MAX37/MAX3/ low-noise amplifier (LNA), downconverter mixers designed for W-CDMA applications, are ideal for ARIB (Japan)

More information

FMS6363 Low-Cost, Three-Channel, 6th-Order, High-Definition, Video Filter Driver

FMS6363 Low-Cost, Three-Channel, 6th-Order, High-Definition, Video Filter Driver FMS6363 Low-Cost, Three-Channel, 6th-Order, High-Definition, Video Filter Driver Features Three Sixth-order 30MHz (HD) Filters Transparent Input Clamping Single Video Drive Load (2Vpp, 50Ω = 6δβ) AC or

More information

300MHz, Low-Power, High-Output-Current, Differential Line Driver

300MHz, Low-Power, High-Output-Current, Differential Line Driver 9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical

More information

V OUT. +Denotes lead(pb)-free/rohs-compliant package. PART

V OUT. +Denotes lead(pb)-free/rohs-compliant package. PART 9-346; Rev 2; / 2kHz, 4µA, Rail-to-Rail General Description The single MAX99/MAX99 and dual MAX992/ MAX993 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current

More information

Broadband Variable-Gain Amplifiers

Broadband Variable-Gain Amplifiers 1-; Rev 1; / EVALUATION KIT AVAILABLE Broadband Variable-Gain Amplifiers General Description The broadband RF variable-gain amplifiers (VGA) are designed for digital and OpenCable set-tops and televisions.

More information

Low-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs

Low-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs 9-83; Rev ; / Low-Cost, Low-Power, Ultra-Small, 3V/5V, 5MHz General Description The MAX442 single and MAX443 dual operational amplifiers are unity-gain-stable devices that combine high-speed performance,

More information

TOP VIEW. Maxim Integrated Products 1

TOP VIEW. Maxim Integrated Products 1 19-295; Rev ; 8/1 High-Current VCOM Drive Buffer General Description The is a high-current operational transconductance amplifier. The is ideal for driving the backplane of an active matrix, dot inversion

More information

400MHz, Ultra-Low-Distortion Op Amps

400MHz, Ultra-Low-Distortion Op Amps 9; Rev ; /97 EVALUATION KIT AVAILABLE MHz, Ultra-Low-Distortion Op Amps General Description The MAX8/MAX9/MAX8/MAX9 op amps combine ultra-high-speed performance with ultra-lowdistortion operation. The

More information

+5V MAX3654 FTTH VIDEO TIA IN+ TIA IN- + OPAMP - Maxim Integrated Products 1

+5V MAX3654 FTTH VIDEO TIA IN+ TIA IN- + OPAMP - Maxim Integrated Products 1 19-3745; Rev 0; 7/05 47MHz to 870MHz Analog CATV General Description The analog transimpedance amplifier (TIA) is designed for CATV applications in fiber-to-the-home (FTTH) networks. This high-linearity

More information

SGM9123 Triple, 8MHz, 3rd Order SDTV Video Filter Drivers

SGM9123 Triple, 8MHz, 3rd Order SDTV Video Filter Drivers SGM9 Triple, MHz, rd Order GENERAL DESRIPTION SGM9 is a video buffer which integrates triple db Gain rail-to-rail output driver and triple rd output reconstruction filter, it has MHz -db bandwidth and

More information

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET 19-1601; Rev 2; 11/05 EVALUATION KIT AVAILABLE 622Mbps, Ultra-Low-Power, 3.3V General Description The low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at = 3.3V.

More information

Dual SPDT Negative Rail Analog Switches with ±VCC Capability

Dual SPDT Negative Rail Analog Switches with ±VCC Capability 19-4244; Rev 1; 12/8 EVALUATION KIT AVAILABLE Dual SPDT Negative Rail Analog Switches General Description The MAX1454/MAX1455/MAX1455A/MAX1456 dual single-pole/double-throw (SPDT) audio switches feature

More information

Precision, Low-Power, 6-Pin SOT23 Temperature Sensors and Voltage References

Precision, Low-Power, 6-Pin SOT23 Temperature Sensors and Voltage References 19-2457; Rev 2; 11/03 Precision, Low-Power, 6-Pin SOT23 General Description The are precise, low-power analog temperature sensors combined with a precision voltage reference. They are ideal for applications

More information

MAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs

MAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs General Description The MAX965/MAX9651 are single- and dual-channel VCOM amplifiers with rail-to-rail inputs and outputs. The MAX965/MAX9651 can drive up to 13mA of peak current per channel and operate

More information

High-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting MAX1582/MAX1582Y

High-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting MAX1582/MAX1582Y 19-2783; Rev 2; 8/05 EVALUATION KIT AVAILABLE High-Efficiency Step-Up Converters General Description The drive up to six white LEDs in series with a constant current to provide display backlighting for

More information

10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23

10-Bit, Low-Power, Rail-to-Rail Voltage-Output Serial DAC in SOT23 19-195; Rev 1; 1/4 1-Bit, Low-Power, Rail-to-Rail General Description The is a small footprint, low-power, 1-bit digital-to-analog converter (DAC) that operates from a single +.7V to +5.5V supply. The

More information

350MHz, Ultra-Low-Noise Op Amps

350MHz, Ultra-Low-Noise Op Amps 9-442; Rev ; /95 EVALUATION KIT AVAILABLE 35MHz, Ultra-Low-Noise Op Amps General Description The / op amps combine high-speed performance with ultra-low-noise performance. The is compensated for closed-loop

More information

Nanopower Op Amp in Ultra-Tiny WLP and SOT23 Packages

Nanopower Op Amp in Ultra-Tiny WLP and SOT23 Packages EVALUATION KIT AVAILABLE MAX47 General Description The MAX47 is a single operational amplifier that provides a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered

More information

Dual ECL and Dual/Quad PECL, 500ps, Ultra-High-Speed Comparators

Dual ECL and Dual/Quad PECL, 500ps, Ultra-High-Speed Comparators 19-2409; Rev 1; 9/02 General Description The MAX9600/MAX9601/MAX9602 ultra-high-speed comparators feature extremely low propagation delay (ps). These dual and quad comparators minimize propagation delay

More information

Precision, Micropower, Low-Dropout, SC70 Series Voltage Reference

Precision, Micropower, Low-Dropout, SC70 Series Voltage Reference 19-2428; Rev ; 4/2 Precision, Micropower, Low-Dropout, SC7 General Description The family of precision, low-dropout, micropower voltage references are available in the miniature 3-pin SC7 surface-mount

More information

CLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1

CLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1 19-2575; Rev 0; 10/02 One-to-Four LVCMOS-to-LVPECL General Description The low-skew, low-jitter, clock and data driver distributes one of two single-ended LVCMOS inputs to four differential LVPECL outputs.

More information

PA RT MAX3408EUK 100Ω 120Ω. Maxim Integrated Products 1

PA RT MAX3408EUK 100Ω 120Ω. Maxim Integrated Products 1 19-2141; Rev ; 8/1 75Ω/Ω/Ω Switchable Termination General Description The MAX346/MAX347/MAX348 are general-purpose line-terminating networks designed to change the termination value of a line, depending

More information

0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches

0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches 19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V

More information

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs

Low-Cost, +3V/+5V, 620µA, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs 9-824; Rev ; /5 Low-Cost, +3V/+5V, 62µA, 2MHz, General Description The MAX4452/MAX4352 single, MAX4453/MAX4353 dual, and / quad amplifiers combine high-speed performance with ultra-low power consumption.

More information

-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1

-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1 19-13; Rev 2; 9/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output

More information

SGM9154 Single Channel, Video Filter Driver for HD (1080p)

SGM9154 Single Channel, Video Filter Driver for HD (1080p) PRODUCT DESCRIPTION The SGM9154 video filter is intended to replace passive LC filters and drivers with an integrated device. The 6th-order channel offers High Definition (HDp) filter. The SGM9154 may

More information

Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197

Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197 General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This

More information

SCLK 4 CS 1. Maxim Integrated Products 1

SCLK 4 CS 1. Maxim Integrated Products 1 19-172; Rev ; 4/ Dual, 8-Bit, Voltage-Output General Description The contains two 8-bit, buffered, voltage-output digital-to-analog converters (DAC A and DAC B) in a small 8-pin SOT23 package. Both DAC

More information

Dual-Rate Fibre Channel Limiting Amplifier

Dual-Rate Fibre Channel Limiting Amplifier 19-375; Rev 1; 7/3 Dual-Rate Fibre Channel Limiting Amplifier General Description The dual-rate Fibre Channel limiting amplifier is optimized for use in dual-rate.15gbps/1.65gbps Fibre Channel optical

More information

I/O Op Amps with Shutdown

I/O Op Amps with Shutdown MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered

More information

FMS6413. Single Channel Video Driver with Integrated Filter and Clamp. Video Features. General Description. Applications.

FMS6413. Single Channel Video Driver with Integrated Filter and Clamp. Video Features. General Description. Applications. www.fairchildsemi.com FMS6413 Single Channel Video Driver with Integrated Filter and Clamp Video Features Integrated Video Low Pass reconstruction filter Integrated output driver provides a low impedance

More information

LNAs with Step Attenuator and VGA

LNAs with Step Attenuator and VGA 19-231; Rev 1; 1/6 EVALUATION KIT AVAILABLE LNAs with Step Attenuator and VGA General Description The wideband low-noise amplifier (LNA) ICs are designed for direct conversion receiver (DCR) or very low

More information

Precision, Micropower, Low-Dropout Voltage References MAX6190 MAX6195/MAX6198

Precision, Micropower, Low-Dropout Voltage References MAX6190 MAX6195/MAX6198 19-108; Rev 3; /10 Precision, Micropower, General Description The precision, micropower, low-dropout voltage references offer high initial accuracy and very low temperature coefficient through a proprietary

More information

PART. MAX7401CSA 0 C to +70 C 8 SO MAX7405EPA MAX7401ESA MAX7405CSA MAX7405CPA MAX7405ESA V SUPPLY CLOCK

PART. MAX7401CSA 0 C to +70 C 8 SO MAX7405EPA MAX7401ESA MAX7405CSA MAX7405CPA MAX7405ESA V SUPPLY CLOCK 19-4788; Rev 1; 6/99 8th-Order, Lowpass, Bessel, General Description The / 8th-order, lowpass, Bessel, switched-capacitor filters (SCFs) operate from a single +5 () or +3 () supply. These devices draw

More information

High-Accuracy, 76V, High-Side Current Monitors in SOT23 MAX4007/MAX4008. Features

High-Accuracy, 76V, High-Side Current Monitors in SOT23 MAX4007/MAX4008. Features 19-2743; Rev 3; 4/07 High-Accuracy, 76V, High-Side General Description The precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications.

More information

Low-Cost, SOT23, Voltage-Output, High-Side Current-Sense Amplifier MAX4173T/F/H

Low-Cost, SOT23, Voltage-Output, High-Side Current-Sense Amplifier MAX4173T/F/H 19-13; Rev 5; /11 Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output

More information

W-CDMA Upconverter and PA Driver with Power Control

W-CDMA Upconverter and PA Driver with Power Control 19-2108; Rev 1; 8/03 EVALUATION KIT AVAILABLE W-CDMA Upconverter and PA Driver General Description The upconverter and PA driver IC is designed for emerging ARIB (Japan) and ETSI-UMTS (Europe) W-CDMA applications.

More information

2MHz High-Brightness LED Drivers with High-Side Current Sense and 5000:1 Dimming

2MHz High-Brightness LED Drivers with High-Side Current Sense and 5000:1 Dimming 19-0706; Rev 1; 3/07 EVALUATION KIT AVAILABLE 2MHz High-Brightness LED Drivers with General Description The, step-down constant-current high-brightness LED (HB LED) drivers provide a costeffective solution

More information

EVALUATION KIT AVAILABLE 1µA, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier

EVALUATION KIT AVAILABLE 1µA, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier 19-521; Rev 2; 8/1 EVALUATION KIT AVAILABLE 1µA, 4-Bump UCSP/SOT23, General Description The high-side current-sense amplifier offers precision accuracy specifications of V OS less than 25µV (max) and gain

More information

Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output

Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output AVAILABLE General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package. Offered in three gain versions (T = 2V/V, F = 5V/V,

More information

Single/Dual/Quad, Micropower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators

Single/Dual/Quad, Micropower, Ultra-Low-Voltage, Rail-to-Rail I/O Comparators 9-; Rev ; / Single/Dual/Quad, Micropower, General Description The MAX9 MAX9 single/dual/quad micropower comparators feature rail-to-rail inputs and outputs, and fully specified single-supply operation

More information

76V, High-Side, Current-Sense Amplifiers with Voltage Output

76V, High-Side, Current-Sense Amplifiers with Voltage Output 9-2562; Rev ; /2 76V, High-Side, Current-Sense Amplifiers with General Description The are high-side, current-sense amplifiers with an input voltage range that extends from 4.5V to 76V making them ideal

More information

-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1

-40 C to +85 C. AABN -40 C to +85 C 8 SO -40 C to +85 C 6 SOT23-6 AABP. Maxim Integrated Products 1 19-13; Rev 3; 12/ Low-Cost, SOT23, Voltage-Output, General Description The MAX173 low-cost, precision, high-side currentsense amplifier is available in a tiny SOT23-6 package. It features a voltage output

More information

** Dice/wafers are designed to operate from -40 C to +85 C, but +3.3V. V CC LIMITING AMPLIFIER C FILTER 470pF PHOTODIODE FILTER OUT+ IN TIA OUT-

** Dice/wafers are designed to operate from -40 C to +85 C, but +3.3V. V CC LIMITING AMPLIFIER C FILTER 470pF PHOTODIODE FILTER OUT+ IN TIA OUT- 19-2105; Rev 2; 7/06 +3.3V, 2.5Gbps Low-Power General Description The transimpedance amplifier provides a compact low-power solution for 2.5Gbps communications. It features 495nA input-referred noise,

More information

High-Precision, Low-Voltage, Micropower Op Amp MAX480. General Description. Features. Ordering Information. Applications.

High-Precision, Low-Voltage, Micropower Op Amp MAX480. General Description. Features. Ordering Information. Applications. 9-77; Rev a; /98 High-Precision, Low-oltage, General Description The is a precision micropower operational amplifier with flexible power-supply capability. Its guaranteed µ maximum offset voltage (5µ typ)

More information

TANK+ VRLO TANK- GND MAX2104 CPG2 CPG1 RFOUT IDC+ XTLOUT TQFP. Maxim Integrated Products 1

TANK+ VRLO TANK- GND MAX2104 CPG2 CPG1 RFOUT IDC+ XTLOUT TQFP. Maxim Integrated Products 1 19-1431; Rev 4; 6/05 Direct-Conversion Tuner IC for General Description The low-cost direct-conversion tuner IC is designed for use in digital direct-broadcast satellite (DBS) television set-top box units.

More information

Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs

Low-Cost, High-Speed, Single-Supply Op Amps with Rail-to-Rail Outputs 9-; Rev ; / Low-Cost, High-Speed, Single-Supply General Description The MAX single, MAX dual, MAX triple, and MAX quad op amps are unity-gain-stable devices that combine high-speed performance with Railto-Rail

More information

REFH2 REFH3 REFH0 OUT0 CLK OUT2 OUT3 DIN DOUT REFL3 GND REFL1. Maxim Integrated Products 1

REFH2 REFH3 REFH0 OUT0 CLK OUT2 OUT3 DIN DOUT REFL3 GND REFL1. Maxim Integrated Products 1 19-1925; Rev 1; 6/1 Nonvolatile, Quad, 8-Bit DACs General Description The MAX515/MAX516 nonvolatile, quad, 8-bit digitalto-analog converters (DACs) operate from a single +2.7V to +5.5V supply. An internal

More information