HCPL-0700, HCPL-0701, HCPL-0730, HCPL-0731 Low Input Current High Gain Split Darlington Optocouplers

Size: px

Start display at page:

Download "HCPL-0700, HCPL-0701, HCPL-0730, HCPL-0731 Low Input Current High Gain Split Darlington Optocouplers"

Abner Andrews
6 years ago
Views:

1 HCPL-0700, HCPL-070, HCPL-070, HCPL-07 Low Input Current High Gain Split Darlington Optocouplers Single Channel:HCPL-0700, HCPL-070 Dual Channel:HCPL-070, HCPL-07 Features Low input current 0.5 ma Superior CTR 000% Superior CMR 0 kv/µs CTR guaranteed 0-70 C U.L. Recognized (file# E90700) VDE 0884 recognized (file# 666) approval pending for HCPL-070/07 BSI recognized (file# 866, 866) HCPL-0700/070 only Applications Digital logic ground isolation Telephone ring detector EIA-RS-C line receiver High common mode noise line receiver µp bus isolation Current loop receiver Ordering Information Description December 005 The HCPL-0700, HCPL-070, HCPL-070 and HCPL- 07 optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector housed in a compact 8-pin small outline package. The HCPL-070 and HCPL-07 devices have two channels per package for optimum mounting density. The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. The combination of a very low input current of 0.5 ma and a high current transfer ratio of 000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RSC, while output compatibility is ensured to CMOS as well as high fan-out TTL requirements. Option Part Number Example Description V HCPL-0700V VDE 0884 R HCPL-0700R Tape and reel (500 units per reel) RV HCPL-0700RV VDE 0884, Tape and reel (500 units per reel) R HCPL-0700R Tape and reel (500 units per reel) RV HCPL-0700RV VDE 0884, Tape and reel (500 units per reel) 005 Fairchild Semiconductor Corporation

2 Package Dimensions SEATING PLANE Pin 0.4 (.6) 0. (.) 0.0 (5.) 0.8 (4.6) 0.64 (4.6) 0.44 (.66) (0.0) 0.0 (0.5) 0.00 (0.08) 0.0 (0.8) (.7) TYP Lead Coplanarity : (0.0) MAX 0.09 (0.48) 0.44 (6.9) 0.4 (5.69) NOTE All dimensions are in inches (millimeters) 0.00 (0.5) (0.6) Truth Table LED ON LOW OFF HIGH Schematic N/C 8 V CC + 7 V B V F _ 6 N/C 4 5 GND HCPL0700 / HCPL V CC V F _ 7 V 0 _ 6 V 0 V F GND HCPL070 / HCPL07

3 Absolute Maximum Ratings (T A = 5 C unless otherwise specified) Parameter Symbol Value Units Storage Temperature T STG -40 to +5 C Operating Temperature T OPR -40 to +85 C Reflow Temperature Profile (Refer to fig. ) EMITTER DC/Average Forward Input Current I F (avg) 0 ma Peak Forward Input Current (50% duty cycle, ms P.W.) I F (pk) 40 ma Peak Transient Input Current - ( µs P.W., 00 pps) I F (trans).0 A Reverse Input Voltage V R 5 V Input Power Dissipation P D 5 mw DETECTOR Average Output Current (Pin 6) I O (avg) 60 ma Emitter-Base Reverse Voltage HCPL-0700/HCPL-070 V EBR 0.5 V Supply Voltage, Output Voltage HCPL-0700/HCPL-070 V CC, -0.5 to 7 V HCPL-070/HCPL to 8 Output power dissipation P D 00 mw Electrical Characteristics (T A = 0 to 70 C Unless otherwise specified) Individual Component Characteristics Parameter Test Conditions Symbol Device Min Typ** Max Unit EMITTER I F =.6mA T A = 5 C V F HCLP-0700/ V Input Forward Voltage HCLP-070/.5 All.75 Input Reverse Breakdown Voltage (T A =5 C, I R = 0 µa) BV R All 5.0 DETECTOR (I F = 0 ma, = V CC = 8 V) I OH HCPL-070/ µa Logic high output current (I F = 0 ma, = V CC = 7 V) HCPL-0700/ Logic Low Supply I F =.6 ma, = Open, V CC = 8V I CCL HCPL-0700/ ma Current I F = I F =.6mA V CC = 7V HCPL = = Open V CC = 8 V HCPL-07 Logic High I F = 0 ma, = Open, V CC = 8V I CCH HCPL-0700/0 0 µa Supply Current I F = I F = 0, V CC = 7V HCPL = = Open, V CC = 8 V HCPL

4 Transfer Characteristics (T A = 0 to 70 C Unless otherwise specified) Parameter Test Conditions Symbol Device Min Typ** Max Unit COUPLED (I F = 0.5 ma, = 0.4 V, V CC = 4.5V) CTR HCPL-070/ % Current transfer ratio (Notes,) Logic low output voltage Isolation Characteristics (T A = 0 to 70 C Unless otherwise specified) ** All typicals at T A = 5 C I F =.6 ma, = 0.4 V, V CC = 4.5V HCPL HCPL HCPL HCPL (I F = 0.5 ma, I O = ma, V CC = 4.5V) L HCPL V (I F =.6 ma, I O = 8 ma, V CC = 4.5V) HCPL (I F = 5 ma, I O = 5 ma, V CC = 4.5V) 0.4 (I F = ma, I O = 4 ma, V CC = 4.5V) 0.4 (I F =.6 ma, I O = 4.8 ma, V CC = 4.5V) HCPL-0700/ Characteristics Test Conditions Symbol Min Typ** Max Unit Input-output insulation leakage current Withstand insulation test voltage (Relative humidity = 45%) (T A = 5 C, t = 5 s) (V I-O = 000 VDC) (Note 4) (R H 50%, T A = 5 C) (I I-O µa, t = min.) (Note 4, 5) I I-O.0 µa V ISO 500 V RMS Resistance (input to output) (Note 4) (V I-O = 500 VDC) R I-O 0 Ω 4

5 Switching Characteristics (T A = 0 to 70 C unless otherwise specified., V CC = 5 V) Parameter Test Conditions Symbol Device Min Typ** Max Unit Propagation delay time to logic low (Note ) (Fig. 4) Propagation delay time to logic high (Note ) (Fig. 4) Common mode transient immunity at logic high Common mode transient immunity at logic low (R L = 4.7 kω, I F = 0.5 ma) T PHL HCPL µs HCPL-07 0 T A = 5 C HCPL HCPL (R L = 70 Ω, I F = ma) HCPL-070 HCPL-07 T A = 5 C HCPL HCPL (R L =. kω, I F =.6 ma) HCPL HCPL-070/07 5 T A = 5 C HCPL HCPL-070/07 0 (R L = 4.7 kω, I F = 0.5 ma) T PLH HCPL-070/ 90 µs T A = 5 C HCPL-070/ 60 (R L = 70 Ω, I F = ma) HCPL HCPL-07 5 T A = 5 C HCPL HCPL (R L =. kω, I F =.6 ma) HCPL-0700/0/ 50 T A = 5 C HCPL-0700/0/ 7 5 (I F = 0 ma, V CM = 0 V P-P ) T A = 5 C (R L =. kω) (Note ) (Fig. 5) (I F =.6 ma, V CM = 0 V P-P, R L =. kω) T A = 5 C (Note ) (Fig. 5) CM H ALL,000 0,000 V/µs CM L ALL,000 0,000 V/µs Notres. Current Transfer Ratio is defined as a ratio of output collector current, I O, to the forward LED input current, I F, times 00%.. Pin 7 open. Use of a resistor between pins 5 and 7 will decrease gain and delay time.. Common mode transient immunity in logic high level is the maximum tolerable (positive) dv CM /dt on the leading edge of the common mode pulse signal, V CM, to assure that the output will remain in a logic high state (i.e., >.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dv CM /dt on the trailing edge of the common mode pulse signal, V CM, to assure that the output will remain in a logic low state (i.e., <0.8 V). 4. Device is considered a two terminal device: Pins,, and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together VAC RMS for minute duration is equivalent to 000 VAC RMS for second duration. ** All typicals at TA = 5 C 5

6 Typical Performance Curves tp - PROPAGATION DELAY (µs) tp - PROPAGATION DELAY (µs) tp - PROPAGATION DELAY (µs) Fig. Propagation Delay vs. Temperature (HCPL-0700, HCPL-070) T A - TEMPERATURE ( C) V CC = 5 V I F = 0.5 ma R L = 4.7 kω /f = 50 µs Fig. Propagation Delay vs. Temperature (HCPL-0700, HCPL-070) I F = ma V CC = 5 V R L = 70 Ω /f = 50 µs T A - TEMPERATURE ( C) T A - TEMPERATURE ( C) t PLH t PHL Fig. 5 Propagation Delay vs. Input Forward Currrent (HCPL-070, HCPL-07) T A = 5 V CC = 5V t PLH R L = 4.7kΩ t PLH R L =.kω t PHL R L =.kω or 4.7kΩ t PLH t PHL tp - PROPAGATION DELAY (µs) IOH - LOGIC HIGH OUTPUT CURRENT (na) IO - OUTPUT CURRENT (ma) Fig. 4 Logic High Output Current vs. Temperature (HCPL-0700, HCPL-070) 000 V CC = = 5.5 V Fig. Propagation Delay vs. Temperature (HCPL-0700, HCPL-070) I F =.6 ma V CC = 5 V R L =. kω /f = 50 µs T A - TEMPERATURE ( C) T A - TEMPERATURE ( C) t PLH t PHL Fig. 6 Output Current vs. Input Forward Current (HCPL-0700, HCPL-070) T A = 85 C T A = 70 C T A = 5 C T A = 0 C T A = -40 C V CC = 5V = 0.4V I F - INPUT FORWARD CURRENT (ma) 6

7 Typical Performance Curves ICCL - LOGIC LOW SUPPLY CURRENT (ma) IF - FORWARD CURRENT (ma) IO - OUTPUT CURRENT (ma) Fig. 7 Input Forward Current vs. Forward Voltage (HCPL-0700, HCPL-070) T A = 85 C T A = 70 C T A = 5 C T A = 0 C T A = -40 C V F - FORWARD VOLTAGE (V) Fig. 9 Logic Low Supply Current vs. Input Forward Current (HCPL-0700, HCPL-070) Logic Low Supply Current vs. Input Forward Current V CC = 8V V CC = 5V I F - INPUT FORWARD CURRENT (ma) I F = 5.0mA I F = 4.5mA I F = 4.0mA I F =.5mA I F =.0mA I F =.5mA V CC = 5V T A = 5 C Fig. DC Transfer Characteristics (HCPL-0700, HCPL-070) I F =.0mA I F =.5mA I F =.0mA I F = 0.5mA IF - FORWARD CURRENT (ma) ICC (PER CHANNEL) - SUPPLY CURRENT (ma) IO - OUTPUT CURRENT (ma) Fig. 8 Input Forward Current vs. Forward Voltage (HCPL-070, HCPL-07) Fig. 0 Supply Current vs. Input Forward Current (HCPL-070, HCPL-07) Fig. DC Transfer Characteristics (HCPL-070, HCPL-07) T A = 70 C T A = 5 C T A = 85 C V F - FORWARD VOLTAGE (V) T A = -40 C T A = 0 C T A = 5 C 40 T A = 5 C V CC = 5V 0 00 V CC = 8V V CC = 7V 0 I F - INPUT FORWARD CURRENT (ma) I F = 5mA I F = 4.5mA 4mA.5mA ma - OUTPUT VOLTAGE (V) - OUTPUT VOLTAGE (V) mA ma.5ma ma 0.5mA 7

8 CTR - CURRENT TRANSFER RATIO (%) Typical Performance Curves Pulse Generator I tr = 5ns F Z O = 50 V I/ f< 00µs I F Monitor R m V F 4 Noise Shield VCC V B 5 GND Test Circuit for HCPL-0700 and HCPL-070 Fig. Current Transfer Ratio vs. Input Forward Current (HCPL-0700, HCPL-070) T A = 85 C T A = 70 C T A = 5 C T A = 0 C T A = -40 C RL 0. µf I F T PHL I F - INPUT FORWARD CURRENT (ma) +5 V C L = 5 pf* 0% DUTY CYCLE I/f < 00 µs.5 V Pulse Generator tr = 5ns Z O = 50 V IF MONITOR Rm I F + VF -.5 V VOL TPLH Fig. 4 Switching Time Test Circuit - VF + V CC = 5V = 0.4V Noise Shield V VCC L 0. µf V0 V0 GND Test Circuit for HCPL-070 and HCPL V C = 5 pf* 8

9 V FF B A I F V F Noise Shield VCM Pulse Gen V 6 O 5 GND Test Circuit for HCPL-0700 and HCPL VCC V B R L 0. µf V CM 0 V t r +5 V - 0% 0% 0 V Switch at A : I = 0 ma F 90% Switch at B : I =.6 ma F VF + Fig. 5 Common Mode Immunity Test Circuit VFF B 90% I F A t f + VF Test Circuit for HCPL-070 and HCPL-07 5 V L Noise Shield V CM + - Pulse Gen VCC V0 V0 GND RL 0. µf +5 V 9

10 8-Pin Small Outline 0.04 (0.6) (.5) 0.75 (6.99) 0.55 (.94) (.7) 0

11 Marking Information Definitions Fairchild logo Device number Carrier Tape Specifications.50 ± ± VDE mark (Note: Only appears on parts ordered with VDE option See order entry table) 4 One digit year code, e.g., 5 Two digit work week ranging from 0 to 5 6 Assembly package code 0.0 MAX 4.0 ± 0.0 V 0. MAX 6.40 ± 0.0 User Direction of Feed X 8.0 ± ± 0.05 YY S 6 Ø.5 MIN.75 ± ± ± ± 0.0 Ø.5 ± 0./-0

12 Reflow Profile C C/Sec Ramp up rate Sec Time (s) 60 C Time above 8 C = 90 Sec >45 C = 4 Sec 60

13 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FAST ActiveArray FASTr Bottomless FPS Build it Now FRFET CoolFET GlobalOptoisolator CROSSVOLT GTO DOME HiSeC EcoSPARK I C E CMOS i-lo EnSigna ImpliedDisconnect FACT IntelliMAX FACT Quiet Series Across the board. Around the world. The Power Franchise Programmable Active Droop DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Formative or In Design First Production Full Production ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOLOGIC OPTOPLANAR PACMAN POP Power47 PowerEdge PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect µserdes ScalarPump SILENT SWITCHER SMART START SPM Stealth SuperFET SuperSOT - SuperSOT -6 SuperSOT -8 SyncFET TinyLogic TINYOPTO TruTranslation UHC UltraFET UniFET VCX Wire This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I7

MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers

MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Features U.L. Recognized (File #E90700, Volume 2) VDE Recognized (File #13616) (add option V for VDE approval, i.e, MOCD223V-M)