TR % L Not stated L % L % L3 2.67% L % L % L3 0.
|
|
- Erica Lynch
- 5 years ago
- Views:
Transcription
1
2 TR 09 Page 2 of 10 Power Quality. Harmonics. SolarLake 20000TLPM Generating Unit rating per phase (rpp) Harmonic At 4555% of rated r outputt 6.6 kva % of rated outpu Harmonic % = Measured Value(Amps) *23/rating per phase(kva) Measured Measured Limit in BS EN Value (MV) % Value (MV) % in Amps in Amps 1 phase 3 phase % 8% % Not stated % 4% % 10.7% % 2.67% % 7.2% % 2% % Not stated % 1.6%
3 TR 09 Page 3 of % 3.1% % 1.% % 2% THD % 13% PWHD % 22%
4 TR 09 Page 4 of 10 SolarLake 20000TLPM Power Quality. Voltage fluctuations andd Flicker. Starting Stoppingg Running d max x d c d (t) d m ax d c d (t) P st P lt 2 hours Measured Values Normalised to standard impedance and 3.68kW for N/A N/A N/A N/ /A N/A N/A N/A N/A multiple units Limits set under BS 4% EN % 3.3% 500ms 4% 3.3% 3.3% 500ms start date location 02\09\2014 end date 02\09\2014 Eurofins Product ing Service (Shanghai)Co.,Ltd. SolarLake 12000TLPM Power Quality. DC injection. power level Recorded value as % of rated AC current 10% % 55% % 1 L Limit 0.25% % 0.25% 0.25% SolarLake 20000TLPM Power Quality. DC injection. power level Recorded value as % of rated AC current 10% % 55% % 1 L Limit 0.25% % 0.25% 0.25%
5 TR 09 Page 5 of 10 Power Quality. Power factor. SolarLake 12000TLPM 216.2V Measured value 230V 253V Measured at threee voltage levels and at full output. Voltage to be Limit maintained withinn ±1.5% of stated level l during the test. the SolarLake 20000TLPM Power Quality. Power factor V Measured value 230V 253V Measured at threee voltage levels and at full output. Voltage to be Limit maintained withinn ±1.5% of stated level l during the test. the
6 TR 09 Page 6 of 10 Protection. Frequency tests Frequency U/F stage 1 U/F stage 2 O/F stage 1 O/F stage Hz 47Hz 51.5Hz 52Hz 20s 0.5s 90s 0.5s Frequency Hz 20.01s Hz s Hz s Hz s tests Confirm Frequency/ no trip 47.7Hz/ 25s No Trip 47.2Hz/ 19.98s No Trip 46.8Hz/ 0.48s No Trip 51.3Hz/ 95s No Trip 51.8Hz/ 89.98s No Trip 52.2Hz/0.48ss No Trip Protection. Voltage tests tests Voltage Voltage Voltage V /e Confirm no trip U/V stage 1 U/V stage V 184 V 2.5s 0.5s V V 2.52 s 0.54 s 204.1V/ 2 3.5s 188V/ 2.48s 180V/ 0.48s stage 1 stage V V 1.0s 0.5s V V s s 258.2V/ 2 2.0s 269.7V/ ss 277.7V/ ss Voltage tests Voltage U/V stage V 2.5s V Voltage V /e 2.52 s 204.1V/ 2 3.5s U/V stage V 0.5s V s 188V/ 2.48s 180V/ 0.48s stage 1 stage V V 1.0s 0.5s V V s s 258.2V/ 2 2.0s 269.7V/ ss 277.7V/ ss Confirm no trip
7 TR 09 Page 7 of 10 Voltage tests Voltage U/V stage 1 U/V stage V 184 V 2.5s 0.5s V V Voltage V /e 2.60 s 204.1V/ 2 3.5s Confirm no trip 0.54 s 188V/ 2.48s 180V/ 0.48s stage 1 stage V V 1.0s 0.5s V V s 0.56 s 258.2V/ 2 2.0s 269.7V/ ss 277.7V/ ss Note for Voltage tests the Voltage required to trip is the settingg ±3.45V. The time can be measured at a larger deviation thann the minimum requiredd to operatee the protection. The tests need to be carried out at the setting ±4V and for the relevant times as shown in the table above to ensure thatt the protection will nott trip in error.
8 TR 09 Page 8 of 10 Protection. Losss of Mains test accordingg BS EN conditions Disconnection limit Frequency : 50+/ 0.1 Hz UN = 230+/3 Vac V Distortion factor of chokes < 2% Quality = s No. P EUT (% of EUT rating Reactiv e load (% of Q L in 6.1.d) PAC A (% of nomi nal) Q AC (% of nomi nal) Run on (ms) P EUT (W) Q f Remarks A at BL A at IB A at IB A at IB A at IB A at IB A at IB A at IB A at IB B at IB B at IB B at IB B at IB B at IB B at BL B at IB B at IB B at IB B at IB B at IB C at IB C at IB C at IB C at IB C at IB C at BL C at IB
9 TR 09 Page 9 of C at IB C at IB C at IB C at IB Protection. Frequency change, Stability y test Start Frequency Change Endd Frequency Confirm no trip Positive Vector Shift 49.5Hz +9 degrees Negative Vector Shift 50.5Hz 9 degrees Positive Frequency Drift 49.5Hz +0.19Hz/sec 51.5Hz Negative Frequency Drift 50.5Hz 0.19Hz/sec 47.5Hz Protection. Reconnection timer. t should prove that the reconnection sequence starts after a minimum of 20 seconds for restoration of voltage and frequency to within the stage 1 settings of table 1. setting Measured Checks onn no reconnection when voltage or frequency is brought too just outside stage 1 limits of table s 185 s At 2.2 V At V At A 47.4 Hz At 51.6 Hz Confirmation that the SSEG does not reconnect. No reconnect No reconnect Noo reconnect No reconnect
10 TR 09 Page 10 of 10 Fault level contribution. SolarLake 12000TLPM SolarLake 20000TLPM For a Inverter SSEG For a Inverter SSEG After Fault 20ms ms 250ms 500ms to trip Volts Amps In seconds After Fault 20ms ms 250ms 500ms to trip Volts Amps In seconds End of Document
G59/3 TYPE TEST VERIFICATION REPORT
G59/3 TYPE TEST VERIFICATION REPORT Type Tested reference number GW3048-EM, GW3648-EM,GW5048-EM System supplier name Jiangsu GoodWe Power Supply Technology Co.,Ltd. Address NO.189 Kun Lun Shan Road, Suzhou
More informationG59/3 TYPE TEST VERIFICATION REPORT. Photovoltaic Microinverter. Tel Fax
Type Tested reference number Unit technology System supplier name Address M250-60-230-S22 Photovoltaic Microinverter Enphase Energy Inc. 1420 North McDowell Blvd. Petaluma, CA USA Tel +1-707-763-4784 Fax
More informationG59/3 TYPE TEST VERIFICATION REPORT
MATERIALS & SAFETY R&D TR 141110T Page 1 of 10 G59/3 TYPE TEST VERIFICATION REPORT This Type Test sheet shall be used to record the results of the type testing of Generating Unit between 16A per phase
More informationGrid tied inverter. Reference test report: Issued by TÜV Rheinland Italia S.r.l. on 19 th Janury 2015
Seite 1 von 5 Page 1 of 5 Type of System: System Manufacturer: Manufacturer data: Grid tied inverter Power-One Italy S.p.A. Via S. Giorgio 642, 52028 Terranuova Bracciolini (AR) - Italy Reference test
More informationIt includes the Generating Units supplier declaration of compliance with the requirements of Engineering Recommendation G59/3
MATERIALS & SAFETY R&D TR170801S Page 1 of 8 G59/3 Type Verification Test Report This Type Test sheet shall be used to record the results of the type testing of Generating Unit between 16A per phase and
More informationEngineering Recommendation G83/2
Engineering Recommendation G83/2 Type Approval and manufacturer/supplier declaration of compliance with the requirements of Engineering Recommendation G83/2. Type reference number STL 300 Type System Supplier
More informationENA G59/3 TYPE VERIFICATION TEST REPORT
ENA G59/3 TYPE VERIFICATION TEST REPORT Type approval and manufacturer/supplier declaration of compliance with the requirements of Engineering Recommendation G59/3. Unit Type reference number Unit Type
More informationGrid tied inverter. Reference test report: Issued by TÜV Rheinland Italia S.r.l. on 10 th February 2015
Seite 1 von 7 Page 1 of 7 Type of System: System Manufacturer: Manufacturer data: Grid tied inverter Power-One Italy S.p.A. Via S. Giorgio 642, 52028 Terranuova Bracciolini (AR) - Italy Reference test
More informationSeite 1 von 8 Page 1 of 8 Appendix 4 Type Verification Test Report (G83/2) Grid tied inverter
Seite 1 von 8 Page 1 of 8 Appendix 4 Type of System: System Manufacturer: Manufacturer data: Grid tied inverter Power-One Italy S.p.A. Via S. Giorgio 642, 52028 Terranuova Bracciolini (AR) - Italy Reference
More informationG59/3 Generating Unit Type Test Sheet
G59/3 Unit Type Test Sheet Type Tested Unit(>16A per phase but 50kW 3 phase or 17kW 1 phase) This Type Test sheet shall be used to record the results of the type testing of Unit between16a per phase and
More informationPVI l-OUTD(-S)-400 PvI10.04CuTD(.s)400 SOLAR GRID TIED INVERTER. Power-One Italy S.p.A.
Power and productivity for a better 11 II II tm FID ref PVI-]2.O(1O.O-I-OUTD( -S,)-4OO & Derived Models (UK G59/3 Type VerUication Test Report,) ENA Engineering Recommendation G59/3 Type Verification Test
More informationENA Engineering Recommendation G59/3 Type Verification Test Report
ref. PVI-4.2(3.6)(3.0)-TL-OUTD & Derived Models (UK G59/3 Type Verification Test Report) ENA Engineering Recommendation G59/3 Type Verification Test Report Type Approval and manufacturer/supplier declaration
More informationmmenda 012 erification n Test Rep port e reference number W3600S BP upplier name oodwe Powe Jiangsu Go O.189 Kun Lun w District, Jian ngsu,china
ENA Engineeringg Recom mmenda ation G883 Isssue 2 20 012 erification n Test Rep port roval and maanufacturer/ssupplier declaaration of co ompliance with the requirrements of Engineering ndation G83/2.
More informationCertificate. Inverter with integrated automatic disconnection device between a generator and the public low-voltage grid
Certificate Applicant: Product: Victron Energy B.V. De Paal 35 1351 JG Almere-Haven The Netherlands Inverter with integrated automatic disconnection device between a generator and the public low-voltage
More informationHarmonic current emissions as per EN
POWER QUALITY Harmonic current emissions as per EN 61000-3-2 Harmonic Test Value in Amps % of fund Limit in Amps 2 0.014 0.16 1.080 3 0.099 1.14 2.300 4 0.009 0.10 0.430 5 0.040 0.46 1.140 6 0.015 0.17
More informationMANUFACTURER AND TEST HOUSE DETAILS
Certificate UK G83/1 The results of tests performed according to reference standard UK G83/1 are summarized in this certificate. Power-One Italy S.p.a. declares that the units set for UK G83/1 operations
More informationSSEG DETAILS (Small-Scale Embedded Generator) SSEG Type Reference: SSEG Model Reference:
Certificate BELGIUM C10/11 Pmax=100% The results of tests performed according to reference standard BELGIUM C10/11 Pmax=100% are summarized in this certificate. Power-One Italy S.p.a. declares that the
More informationSSEG DETAILS (Small-Scale Embedded Generator) SSEG Type Reference: SSEG Model Reference:
Certificate UK G59/2-1 The results of tests performed according to reference standard UK G59/2-1 are summarized in this certificate. Power-One Italy S.p.a. declares that the units set for UK G59/2-1 operations
More informationGrid Converters for Photovoltaic
Grid Converters for Photovoltaic and Wind Power Systems by R. Teodorescu, M. Liserre and P. Rodriguez ISBN: 978 0 470 05751 3 Copyright Wiley 2011 Chapter 3 Grid Requirements for PV Grid connection requirements
More informationINTERIM ARRANGEMENTS FOR GRID TIED DISTRIBUTED ENERGY RESOURCES. Technical Requirements for Grid-Tied DERs
INTERIM ARRANGEMENTS FOR GRID TIED DISTRIBUTED ENERGY RESOURCES Technical Requirements for Grid-Tied DERs Projects Division 6/29/2017 Contents 1 Definitions and Acronyms... 1 2 Technical Interconnection
More informationRenewable Interconnection Standard & Experimental Tests. Yahia Baghzouz UNLV Las Vegas, NV, USA
Renewable Interconnection Standard & Experimental Tests Yahia Baghzouz UNLV Las Vegas, NV, USA Overview IEEE Std 1547 Voltage limitations Frequency limitations Harmonic limitations Expansion of IEEE Std
More informationCompany Directive STANDARD TECHNIQUE: SD1E/2. Technical Requirements for Customer Export Limiting Schemes
Company Directive STANDARD TECHNIQUE: SD1E/2 Technical Requirements for Customer Export Limiting Schemes Policy Summary This Standard Technique specifies the requirements for customer owned Export Limitation
More informationDP&L s Technical Requirements for Interconnection and Parallel Operation of Distributed Generation
DP&L s Technical Requirements for Interconnection and Parallel Operation of Distributed Generation Technical Requirements for Interconnection and Parallel Operation of Distributed Generation Single Phase
More informationProtective Relaying for DER
Protective Relaying for DER Rogerio Scharlach Schweitzer Engineering Laboratories, Inc. Basking Ridge, NJ Overview IEEE 1547 general requirements to be met at point of common coupling (PCC) Distributed
More informationINSTRUCTIONS FOR THE COMMISSIONING AND MAINTENANCE OF DIGITAL GENERATOR PROTECTION 3 I - PRINCIPLES AND APPLICATIONS 4 on 5 6 7 Figure 5 - Inverse time curve (N1) 8 9 1 0 1 1 1 2 1 3 All relays are delivered
More informationReport no GZU-001. Growatt 30000TL3-S, Growatt 30000TL3-SE. Max. input current: 34A/34A 38A/38A
age 2 of 27 Rating : Model Max. DC input Voltage: 30000TL3-S, 30000TL3-SE 33000TL3-S, 33000TL3-SE Input 1000Vdc 40000TL3- NS, 40000TL3- NSE 50000TL3-S, 50000TL3-SE Max. input current: 34A/34A 38A/38A DC
More informationHarmonics, its Mitigation & Result of Case study of Spinning Mill
International Journal of Innovative Research in Engineering & Management (IJIREM) ISSN: 2350-0557, Volume-2, Issue-4, July 2015, its Mitigation & of Case of Spinning Mill Yogesh Subhash Shimpi M. Tech
More informationENERGY SAVINGS THROUGH POWER CONDITIONING WITH THE PowerGUARD SYSTEM
ENERGY SAVINGS THROUGH POWER CONDITIONING WITH THE PowerGUARD SYSTEM Abstract Efficient operation of the electrical system of any facility is essential to controlling operational costs while maximizing
More informationLow Pass Harmonic Filters
Exclusive e-rated Provider PRODUCT SHEET HARMITIGATOR TM Low Pass Harmonic Filters A solution for electrical distribution systems that require stable, reliable power, characterized by unparalleled power
More informationHARMONICS THE BASICS H A R M O N I C M I T I G A T I O N A N D D I S P L A C E M E N T P O W E R F A C T O R C O R R E C T I O N
HARMONICS THE BASICS H A R M O N I C M I T I G A T I O N A N D D I S P L A C E M E N T P O W E R F A C T O R C O R R E C T I O N Harmonic Basics 3 rd Harmonic Fundamental 5 t1h Harmonic 7 th Harmonic Harmonic
More informationE N G I N E E R I N G M A N U A L
1 1 1.0 PURPOSE The purpose of this document is to define policy and provide engineering guidelines for the AP operating companies (Monongahela Power Company, The Potomac Edison Company, and West Penn
More informationOperating Guide October 2006
Operating Guide October 2006 Safety 1 Safety This manual represents your meter as manufactured at the time of publication. It assumes standard software. Special versions of software may be fitted, in which
More informationPower Conditioning Equipment for Improvement of Power Quality in Distribution Systems M. Weinhold R. Zurowski T. Mangold L. Voss
Power Conditioning Equipment for Improvement of Power Quality in Distribution Systems M. Weinhold R. Zurowski T. Mangold L. Voss Siemens AG, EV NP3 P.O. Box 3220 91050 Erlangen, Germany e-mail: Michael.Weinhold@erls04.siemens.de
More informationPOWER CORPORATION. Power Quality. Specifications and Guidelines for Customers. Phone: Fax:
POWER CORPORATION Power Quality Specifications and Guidelines for Customers Phone: 403-514-3700 Fax: 403-514-3719 1 GENERAL OVERVIEW........................................ 1.1 WHAT DOES THIS SPECIFICATION
More informationPage 1 of 28. Ingo Röhr. Frank Hesmer
Page 1 of 28 TEST REPORT Engineering recommendation G83/1 Recommendation for the connection of small-scale embedded generators (up to 16 A per phase) in parallel with public low-voltage distribution networks.
More informationTEST REPORT AS :2005 and AS :2005 Grid connection of energy systems via inverters Grid protection requirements
TEST REPORT AS 4777.2:2005 and AS 4777.3:2005 Grid connection of energy systems via inverters Grid protection requirements Report reference No...: 09TH0459-AS4777_2 Tested by (printed name and signature)...:
More informationENHANCE SWITCHING POWER SUPPLY SPECIFICATION 250 WATT MODEL NO:V525
ENHANCE SWITCHING POWER SUPPLY SPECIFICATION 250 WATT MODEL NO:V525 1.0 SCOPE 2.0 INPUT REQUIREMENTS 2.1 VOLTAGE 2.2 FREQUENCY 2.3 STEAD-STATE CURRENT 2.4 INRUSH CURRENT 3.0 OUTPUT REQUIREMENTS 3.1 AC
More informationImplementation of Revised IEEE Standard 1547
MAY 31, 2017 HOLYOKE, MASSACHUSETTS Implementation of Revised IEEE Standard 1547 Presentation to ISO-TO Operations Committee David Forrest Key Points As New England adds significant amounts of Distributed
More informationAPQline Active Harmonic Filters. N52 W13670 NORTHPARK DR. MENOMONEE FALLS, WI P. (262) F. (262)
APQline Active Harmonic Filters N52 W13670 NORTHPARK DR. MENOMONEE FALLS, WI 53051 P. (262) 754-3883 F. (262) 754-3993 www.apqpower.com Power electronic equipment and AC-DC power conversion equipment contribute
More informationSHUNT ACTIVE POWER FILTER
75 CHAPTER 4 SHUNT ACTIVE POWER FILTER Abstract A synchronous logic based Phase angle control method pulse width modulation (PWM) algorithm is proposed for three phase Shunt Active Power Filter (SAPF)
More informationIEEE sion/1547revision_index.html
IEEE 1547 IEEE 1547: Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces http://grouper.ieee.org/groups/scc21/1547_revi sion/1547revision_index.html
More informationUp to 15 kw Power in Charge, 14.4 kva in Standalone and 13.2 kva in Utility Mode. 90 % Typical Efficiency. Charge Mode Output VDC
The Bel Power Solutions 350INVCHGT150-120-240-8G is a 15 kw inverter/charger that converts AC to DC voltages in charge mode and converts DC voltages to pure sine wave AC in standalone or utility mode.
More informationCHAPTER 5 POWER QUALITY IMPROVEMENT BY USING POWER ACTIVE FILTERS
86 CHAPTER 5 POWER QUALITY IMPROVEMENT BY USING POWER ACTIVE FILTERS 5.1 POWER QUALITY IMPROVEMENT This chapter deals with the harmonic elimination in Power System by adopting various methods. Due to the
More informationMC133C/133Ci. Electric Power/Energy Calibrator. Operation manual
MC133C/133Ci Electric Power/Energy Calibrator Operation manual MC133C Electric Power/Energy Calibrator Powertek Content 1 Basic information... 5 2 Preparation for operation... 6 2.1 Inspecting package
More informationHarmonic control devices
ECE 528 Understanding Power Quality http://www.ece.uidaho.edu/ee/power/ece528/ Paul Ortmann portmann@uidaho.edu 208-733-7972 (voice) Lecture 24 1 Today Harmonic control devices In-line reactors (chokes)
More informationElectric Power Quality: Voltage Sags Momentary Interruptions
Slide 1 Electric Power Quality: Voltage Sags Momentary Interruptions Ward Jewell Wichita State University ward.jewell@wichita.edu Slide 2 Power Quality Events Voltage sags Outages/interruptions Voltage
More informationOrbital GFI Inverter Series
Orbital GFI Inverter Series Datasheet Key Features One, split or three phases and up to 25 kva Superior efficiency of 95% CAN Bus control and DAQ Power quality and EMC compliance in accordance with European
More informationEN50160 Individual Report Summary
EN50160 Individual Report Summary Power Frequency (x.1) Supply Voltage Variations (x.3.x) Rapid Voltage Changes (x.4.1) Flicker (x.4.2) Supply Voltage Dips (x.5) Short Interruption of Supply Voltage (x.6)
More informationSolectria Renewables Modbus Level 5 For models PVI KW
Solectria Renewables Modbus Level 5 For models PVI 50 100KW Revision B 2014, Solectria Renewables, LLC DOCR 070381 B Table of Contents 1 Solectria Renewables Modbus Level 5... 3 1.1 Determine Modbus Level...
More informationMultimeter 500CVD21 RTU500 series
Remote Terminal Units - Data sheet Multimeter 500CVD21 RTU500 series CT/VT interface with 4 voltage and 24 current inputs for direct monitoring of 3/4 wire 0 300 V AC (line to earth), 0...500 V AC (phase
More informationTripping of circuit breakers in PV installations due to zero sequence field impedance
Tripping of circuit breakers in PV installations due to zero sequence field impedance B. Verhelst 1,2, C. Debruyne 1,2, J. Desmet 1,2 1 dept. Electrical Engineering - Lemcko HoWest Kortrijk, Belgium bart.verhelst@howest.be
More informationSystem Requirements for Wind Farms and Distributed Generation. Giuseppe Di Marzio
ystem Requirements for Wind Farms and Distributed Generation Giuseppe Di Marzio giuseppe.di.marzio@elraft.ntnu.no 1 Contents Grid interconnection schemes Power quality requirements Fault Level considerations
More informationOPERATING, METERING AND EQUIPMENT PROTECTION REQUIREMENTS FOR PARALLEL OPERATION OF LARGE-SIZE GENERATING FACILITIES GREATER THAN 25,000 KILOWATTS
OPERATING, METERING AND EQUIPMENT PROTECTION REQUIREMENTS FOR PARALLEL OPERATION OF LARGE-SIZE GENERATING FACILITIES GREATER THAN 25,000 KILOWATTS AND MEDIUM-SIZE FACILITIES (5,000-25,000KW) CONNECTED
More information5320A. Multifunction Electrical Tester Calibrator. Extended Specifications
5320A Multifunction Electrical Tester Calibrator Extended Specifications General Specifications Warm-Up Time...30 minutes Specifications Confidence Level...99 % Specifications Interval...1 year Temperature
More informationPhoenix DX Clean Power (18 Pulse) AC Drive
PHOENIX DX Phoenix DX Clean Power (18 Pulse) AC Drive Poor power quality can be costly. Nonlinear loads, including AC Drives, introduce undesirable harmonic currents into the power system that can damage
More informationSummary of testing: Testing location: Intertek Testing Services Taiwan Ltd.
age 2 of 40 Summary of testing: Tests performed (name of test and test clause): 5.4.3 System reactions flicker 5.4.4 System reactions harmonics and interharmonics 5.4.9 System reactions precautionary measures
More informationCASE STUDY. Implementation of Active Harmonic Filters at Ford Motor Company SA Silverton Plant
CASE STUDY Implementation of Ford Motor Company SA Silverton Plant 1 SCENARIO Ford Motor Company is a global automotive and mobility company based in Dearborn, Michigan. Ford Motor Company of Southern
More informationPower Factor Pre-regulator Using Constant Tolerance Band Control Scheme
Power Factor Pre-regulator Using Constant Tolerance Band Control Scheme Akanksha Mishra, Anamika Upadhyay Akanksha Mishra is a lecturer ABIT, Cuttack, India (Email: misakanksha@gmail.com) Anamika Upadhyay
More informationIssued: September 2, 2014 Effective: October 3, 2014 WN U-60 Attachment C to Schedule 152, Page 1 PUGET SOUND ENERGY
WN U-60 Attachment C to Schedule 152, Page 1 SCHEDULE 152 APPLICATION FOR INTERCONNECTING A GENERATING FACILITY TIER 2 OR TIER 3 This Application is considered complete when it provides all applicable
More informationCHROMA ATE INC. Programmable AC Source 61500/61600 Series. Product Manager: Galen Chou
CHROMA ATE INC. Programmable AC Source 61500/61600 Series Product Manager: Galen Chou Chroma AC Source Family Outline 1. What is programmable AC source? 2. What is user s need? 3. What do they test with
More informationENGINEERING DATA SUBMITTAL For the Interconnection of Generation System
WHO SHOULD FILE THIS SUBMITTAL: Anyone in the final stages of interconnecting a Generation System with Nodak Electric Cooperative, Inc. This submittal shall be completed and provided to Nodak Electric
More informationOPERATIONAL AMPLIFIER & VOLTAGE REFERENCE KL103/A TECHNICAL DATA DESCRIPTION. PIN CONNECTIONS (top view) OPERATIONAL AMPLIFIER
TECHNICAL DATA OPERATIONAL AMPLIFIER & OLTAGE REFERENCE KL13/A OPERATIONAL AMPLIFIER LOW INPUT OFFSET OLTAGE :. typ. LOW SUPPLY CURRENT : 3 A/op. (@ cc = ) MEDIUM BANDWIDTH (unity gain) :.9MHz LARGE OUTPUT
More informationPOWER QUALITY SPECIFICATIONS AND GUIDELINES FOR CUSTOMERS ENGINEERING STANDARDS CITY OF LETHBRIDGE ELECTRIC
CITY OF LETHBRIDGE ELECTRIC ENGINEERING STANDARDS POWER QUALITY SPECIFICATIONS AND GUIDELINES FOR CUSTOMERS The City of Lethbridge acknowledges the use of other utility industry and industry committee
More informationIEEE 1547: Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
IEEE PES Boston Chapter Technical Meeting IEEE 1547: Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces P1547 Chair David
More informationVoltage Volts AC RMS , 1 Phase
The operational specifications of the Elgar EW 3001 are listed below. All specifications are tested according to the standard Elgar test procedures. All specifications are based on a full rated power resistive
More informationOPERATING, METERING, AND EQUIPMENT PROTECTION REQUIREMENTS FOR PARALLEL OPERATION OF LARGE-SIZE GENERATING FACILITIES GREATER THAN 2,000 KILOWATTS
OPERATING, METERING, AND EQUIPMENT PROTECTION REQUIREMENTS FOR PARALLEL OPERATION OF LARGE-SIZE GENERATING FACILITIES GREATER THAN 2,000 KILOWATTS CONNECTED TO THE DISTRIBUTION SYSTEM ORANGE AND ROCKLAND
More informationPhase-phase/phase-neutral: 24/13.8 kv star, 13.8 kv delta, 12/6.9 kv star.
Summary Of Interconnection Technical Guidelines for Renewable Energy Systems 0-100 kw under Standard Offer Contract (Extract from JPS Guide to Interconnection of Distributed Generation) This document is
More informationImpact of High PV Penetration on Grid Operation. Yahia Baghzouz Professor of Electrical engineering University of Nevada Las Vegas
Impact of High PV Penetration on Grid Operation Yahia Baghzouz Professor of Electrical engineering University of Nevada Las Vegas Overview Introduction/Background Effects of High PV Penetration on Distribution
More informationTEST REPORT DIN V VDE V :2006 Automatic disconnecting device
age 1 of 23 TEST REORT Automatic disconnecting device Report Reference No...: GZ10080033-1 Date of issue...: August 18, 2010 Total number of pages... 23 pages Testing Laboratory...: Address...: Tested
More informationProduct Specification
MODEL NO. WP507F12 This power supply is a small footprint, AC input power supply. This power supply is capable of supplying 400 watts of output power into 5 DC output voltages. 1.0 INPUT REQUIREMENTS 1.1
More informationELECTRICIAN S THEORY EXAMINATION 17 November 2012 QUESTION AND ANSWER BOOKLET
Candidate Code No. ET43 For Board Use Only Result Date Int Result Date Int ELECTRICIAN S THEORY EXAMINATION 17 November 2012 QUESTION AND ANSWER BOOKLET INSTRUCTIONS READ CAREFULLY Time Allowed: Three
More informationImprovement of Electricity Distribution Services Using a DVR with a Constant DC Voltage Source Instaled in MV Connection Substations
Improvement of Electricity Distribution Services Using a DVR with a Constant DC Voltage Source Instaled in MV Connection Substations Gheorghe Ioan Nicolaescu, Horia Andrei, Stefan Radulescu Electrical
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationEffective Harmonic Mitigation with Active Filters
Advancing Power Quality White Paper Effective Harmonic Mitigation with Active Filters Written by: Ian Wallace Variable Speed Drive with no Harmonic Mitigation Industry standard variable speed drives, with
More informationMotors and drives. Module B- Introduction to input measurements
Motors and drives Module B- Introduction to input measurements Introduction to input measurements There are a number of locations where input measurements may be made Which is the most important location
More informationTEST REPORT IEC Uninterruptible power systems Part 3: Method of specifying the performance and test requirements
Test Report issued under the responsibility of: TEST REORT IEC 62040-3 Uninterruptible power systems art 3: Method of specifying the performance and test requirements Report reference No...: 11-EL-0026.06
More informationPOWER FACTOR CORRECTION OF MACHINE LABORATORY AND CNC MACHINE BY USING IPFC CONTROLLER
POWER FACTOR CORRECTION OF MACHINE LABORATORY AND CNC MACHINE BY USING IPFC CONTROLLER Submitted by:- DEEPAK KUMAR BAGHAR PRAVAT KUMAR PATRA DEVIPRASAD SINGHDEO SARTHAK PATI ASHIS PANDA ANUP MANGARAJ 110301EER101
More informationMoving Test - MT3000
Moving Test - MT3000 Three-Phase Portable Test System Keep ahead with Modular Design The Modular Concept The MT3000 is based on a real modular design concept to provide the greatest possible flexibility
More informationSimulation and Implementation of DVR for Voltage Sag Compensation
Simulation and Implementation of DVR for Voltage Sag Compensation D. Murali Research Scholar in EEE Dept., Government College of Engineering, Salem-636 011, Tamilnadu, India. Dr. M. Rajaram Professor &
More informationModule 4 Unit 4 Feedback in Amplifiers
Module 4 Unit 4 Feedback in mplifiers eview Questions:. What are the drawbacks in a electronic circuit not using proper feedback? 2. What is positive feedback? Positive feedback is avoided in amplifier
More informationProject acronym: Multi-island
Technical report for The Experimental investigation on the performance characteristics of anti-islanding techniques in the prospect of high PV penetration level Project acronym: Multi-island USER PROJECT
More informationUV3 _ Three-Phase Undervoltage Protection Low-Set Stage (UV3Low) High-Set Stage (UV3High)
1MRS752333-MUM Issued 10/1997 Version: H/23.06.2005 Data subject to change without notice Three-Phase Undervoltage Protection Low-Set Stage (UV3Low) High-Set Stage (UV3High) Contents 1. Introduction...
More informationAC+DC Power Sources. Newtons4th Ltd. N4A06-6kVA Single Phase N4A18-18kVA Three Phase N4A30-30kVA Three Phase Higher Power Systems also Available
N4L Newtons4th Ltd AC+DC Power Sources Compliant Testing In Accordance with: IEC/EN61000-3-2 IEC/EN61000-3-3 IEC/EN61000-3-11 N4A06-6kVA Single Phase N4A18-18kVA Three Phase - 30kVA Three Phase Higher
More informationManjeet Baniwal 1, U.Venkata Reddy 2, Gaurav Kumar Jha 3
Application of to alleviate voltage sag and swell Manjeet Baniwal 1, U.Venkata Reddy 2, Gaurav Kumar Jha 3 123 (Electrical Engineering, AGPCE Nagpur/ RTMNU, INDIA) ABSTRACT : This paper deals with modelling
More informationBED INTERCONNECTION TECHNICAL REQUIREMENTS
BED INTERCONNECTION TECHNICAL REQUIREMENTS By Enis Šehović, P.E. 2/11/2016 Revised 5/19/2016 A. TABLE OF CONTENTS B. Interconnection Processes... 2 1. Vermont Public Service Board (PSB) Rule 5.500... 2
More informationSC72-220S24 Technical Specification
Key Features Size: 4.72 2.99 0.94(in) AC input range:90~265vac Single outputs:24v/3.0a High efficiency:85% Line regulation: ±2% Load regulation: ±2% Low ripple&noise: 100mV short circuit Output over Input
More informationGreen LED (right of 'D' type connector)
3050A EXTENDED SPECIFICATIONS General Specifications TRANSMILLE LTD Warm Up Time Double the time since last used up to 20 minutes maximum Standard Interfaces USB Optional Interfaces GPIB (IEEE-488) : RS232
More informationModel 3102D 0-2 kv H.V. Power Supply
Features Compact single width NIM package Regulated up to ±2000 V dc. 1 ma output Noise and ripple 3 mv peak to peak Overload and short circuit protected Overload, inhibit and polarity status indicators
More informationGrid Measurement Modules
Grid Measurement and Protection Module GMP232 The GMP232 module enables the safe, reliable and fast measuring of all relevant values for threephase electrical networks. It also provides a number of monitoring
More informationTechnical information Grid Support Utility Interactive Inverters for Sunny Central-US and Sunny Central Storage-US
Technical information Grid Support Utility Interactive Inverters for Sunny Central-US and Sunny Central Storage-US ENGLISH SC-US-GridServices-TI-en-10 Version 1.0 Table of Contents SMA Solar Technology
More informationCompliance activities
DOCUMENTLOCATIE SO-SOC 13-141 PAGINA 1 van 28 Compliance activities Compliance activities in relation to Connection Requirements Wind Farms System Operations - Version V3.0 January 2014 - PAGINA 2 van
More informationThe development of the SA grid code on Power Quality emission. Dr. Gerhard Botha 2017/08/08
The development of the SA grid code on Power Quality emission Dr. Gerhard Botha 2017/08/08 Overview What is the Grid Code? What is Power Quality? Power Quality Management Principles Differences Challenges
More informationHybrid Anti-Islanding Algorithm for Utility Interconnection of Distributed Generation
Hybrid Anti-Islanding Algorithm for Utility Interconnection of Distributed Generation Maher G. M. Abdolrasol maher_photo@yahoo.com Dept. of Electrical Engineering University of Malaya Lembah Pantai, 50603
More informationFuel cell power system connection. Dynamics and Control of Distributed Power Systems. DC storage. DC/DC boost converter (1)
Dynamics and Control of Distributed Power Systems Fuel cell power system connection Ian A. Hiskens University of Wisconsin-Madison ACC Workshop June 12, 2006 This topology is fairly standard, though there
More informationMT 560/UMT TRANSDUCER & ANALYZER
MT 560/UMT 560 - TRANSDUCER & ANALYZER USE The MT 560/UMT 560 multi transducer and analyzer is used for a permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard.
More information2. The. op-amp in and 10K. (a) 0 Ω. (c) 0.2% (d) (a) 0.02K. (b) 4. The. 5 V, then. 0V (virtual. (a) (c) Fall V. (d) V.
Homework Assignment 04 Question 1 (2 points each unless noted otherwise) 1. A 9-V dc power supply generates 10 W in a resistor. What peak-to-peak amplitude should an ac source have to generate the same
More informationPower Quality and Harmonic :Causes and Effects with Paper Mill Factory
Power Quality and Harmonic :Causes and Effects with Paper Mill Factory Danaisak Tangsakha PEA Thailand danaisakpq@gmail.com Provincial Electricity Authority, Thailand 1 Topics Introduction Power Quality
More informationOwner/Customer Name: Mailing Address: City: County: State: Zip Code: Phone Number: Representative: Address: Fax Number:
Interconnection of a Customer-Owned Renewable Generation System of Greater than 100 KW and Less than or Equal to 1 MW to the LCEC Electric Grid Tier 3 Application and Compliance Form Instructions: Complete
More informationMEASUREMENT CAMPAIGN AND ASSESSMENT OF THE QUALITY OF SUPPLY IN RES AND DG FACILITIES IN SPAIN
MEASUREMENT CAMPAIGN AND ASSESSMENT OF THE QUALITY OF SUPPLY IN RES AND DG FACILITIES IN SPAIN Eugenio PEREA*, Eduardo ZABALA*, J. Emilio RODRÍGUEZ*, Asier GIL DE MURO*, Hugo GAGO * * * Fundación LABEIN,
More informationInternational Journal of Advance Engineering and Research Development ANALYSIS AND MITIGATION OF HARMONICS IN MEDICAL FIELD
Scientific Journal of Impact (SJIF): 5.71 International Journal of Advance Engineering and Research Development Volume 5, Issue 04, April -2018 e-issn (O): 2348-4470 p-issn (P): 2348-6406 ANALYSIS AND
More information