SSEG DETAILS (Small-Scale Embedded Generator) SSEG Type Reference: SSEG Model Reference:
|
|
|
- Clarissa Caldwell
- 5 years ago
- Views:
Transcription
1 Certificate BELGIUM C10/11 Pmax=100% The results of tests performed according to reference standard BELGIUM C10/11 Pmax=100% are summarized in this certificate. Power-One Italy S.p.a. declares that the units set for BELGIUM C10/11 Pmax=100% operations are characterized by the following features: The internal specification and parameters are set to be compliant with BELGIUM C10/11 Pmax=100% engineering requirements. All units have identical internal parameters setting. These parameters cannot be changed without the usage of password protected tool. SSEG DETAILS (Small-Scale Embedded Generator) SSEG Type Reference: SSEG Model Reference: PHOTO-VOLTAIC and EOLIC GRID TIED INVERTER PVI-6000-TL-OUTD PVI-6000-TL-OUTD-S PVI-6000-TL-OUTD-W PVI-5000-TL-OUTD PVI-5000-TL-OUTD-S PVI-5000-TL-OUTD-W Maximum export capability (SSEG rating less parasitic load) 6000 W ( PVI-6000-TL-OUTD and derived models) 5000 W ( PVI-5000-TL-OUTD and derived models) Nominal Output AC Power 6000 W (PVI-6000-TL-OUTD and derived models) 5000 W (PVI-5000-TL-OUTD and derived models) TEST HOUSE DETAILS Name: Power-one Italy S.p.A. - R.& D. Department Address: Via S. Giorgio 642, Terranuova Bracciolini Arezzo - Italy Telephone number: Fax number: address service@power-one.com TEST RESULTS SUMMARY Power Quality: Harmonic Current Emission as per EN Voltage Fluctuation and Flickers as per EN DC Injection as per VDE-0126 Power Factor as per VDE-0126 Protection: Under/Over Frequency Tests Under/Over Voltage Tests Reconnection Times Loss of Main (Anti-Islanding) Tests as per VDE-0126 Power-One Italy S.p.a. Terranuova Bracciolini, September 16, 2013 Robert White (Director Safety & Environmental Compliance) File: PVI-6000-(5000)-TL-OUTD_Certificate_C1011_100%_Rev_16-Sep-2013.doc Page 1 of 5
2 TEST RESULTS DETAILS TYPE VERIFICATION TEST SHEET POWER QUALITY HARMONICS CURRENT EMISSIONS 6000-TL-OUTD, Harmonics Current Emission as per EN Value of short circuit power SSC=0.198 RSCE=33 Harmonic 2rd [%A] 3rd [%A] 4rd [%A] 5rd [%A] 6rd [%A] 7rd [%A] 8rd [%A] Limit Result L Harmonic 9rd [%A] 10rd [%A] 11rd [%A] 12rd [%A] 13rd [%A] THD [%A] PWHD [%A] Limit Result L TL-OUTD, Harmonics Current Emission as per EN Value of short circuit power SSC=0.165 RSCE=33 Harmonic 2rd [%A] 3rd [%A] 4rd [%A] 5rd [%A] 6rd [%A] 7rd [%A] 8rd [%A] Limit Result L Harmonic 9rd [%A] 10rd [%A] 11rd [%A] 12rd [%A] 13rd [%A] THD [%A] PWHD [%A] Limit Result L DC INJECTION PERFORMACES 6000-TL-OUTD, DC injection as per VDE-0126 Limit 0.15 [A] ( 0.5% of Inom) tested at three power levels Test Level [%Pout] 10% 50% 100% Test value L1 [A] TL-OUTD, DC injection as per VDE-0126 Limit [A] ( 0.5% of Inom) tested at three power levels Test Level [%Pout] 10% 50% 100% Test value L1 [A] POWER FACTOR PERFORMANCES 6000-TL-OUTD, Power Factor as per VDE lag (over than 20% of Power) lead at three voltage levels and three power levels Test Level [Vac] Test value [10% Pout] Test value [50% Pout] Test value [100% Pout] TL-OUTD, Power Factor as per VDE lag (over than 20% of Power) lead at three voltage levels and three power levels Test Level [Vac] Test value [10% Pout] Test value [50% Pout] Test value [100% Pout] File: PVI-6000-(5000)-TL-OUTD_Certificate_C1011_100%_Rev_16-Sep-2013.doc Page 2 of 5
3 VOLTAGE FLUCTUACTION AND FLICKERS 6000-TL-OUTD, Voltage Fluctuation and Flickers as per EN Voltage Pst [%] Plt [%] D(t)>3% dc [%] dmax [%] Disturbance Limit Test value % TL-OUTD, Voltage Fluctuation and Flickers as per EN Voltage Pst [%] Plt [%] D(t)>3% dc [%] dmax [%] Disturbance Limit Test value % POWER LIMITATIONS PVI-6000-TL-OUTD, Power limitations of input and output Pin CH1 [W] Pin CH2 [W] Iin CH1 [A] Iin CH2 [A] Pout [W] Iout [A] Limit Test value PVI-5000-TL-OUTD, Power limitations of input and output Pin CH1 [W] Pin CH2 [W] Iin CH1 [A] Iin CH2 [A] Pout [W] Iout [A] Limit Test value File: PVI-6000-(5000)-TL-OUTD_Certificate_C1011_100%_Rev_16-Sep-2013.doc Page 3 of 5
4 PROTECTION -PVI-6000-TL-OUTD- -PVI-5000-TL-OUTD- UNDER FREQUENCY TESTS Fnom=50.00 Hz BELG C % Limit Settings Results Frequency [Hz] Time Frequency [Hz] Time Frequency [Hz] Time [s] Under Frequency < OVER FREQUENCY TESTS Fnom=50.00 Hz BELG C % Limit Settings Results Frequency [Hz] Time Frequency [Hz] Time Frequency [Hz] Time [s] Over Frequency > UNDER VOLTAGE TESTS Vϕ-n nom = 230 V BELG C % Limit Settings Results Over Voltage > Voltage [V] Time Voltage [V] Time Voltage [V] Time [s] L1-N OVER VOLTAGE TESTS Vϕ-n nom = 230 V BELG C % Limit Settings Results Under Voltage << Voltage [V] Time Voltage [V] Time Voltage [V] Time [s] L1-N BEFORE CONNECTION BELG C % Limit Settings Results Frequency max [Hz] Frequency min [Hz] Voltage max [V] Voltage min [V] RECONNECTION TIMES After Under/Over Voltage After Under/Over Frequency After Loss of Main Minimum Value Limit [s] Actual setting [s] Recorded value [s] LOSS OF MAIN TESTS Method used Current pulse for Impedance measurement and Active Power Variation Output power Level 25% 50% 100% VDE-0126 Limit [s] Trip value [s] <5 <5 <5 File: PVI-6000-(5000)-TL-OUTD_Certificate_C1011_100%_Rev_16-Sep-2013.doc Page 4 of 5
5 SSEG Short Circuit Current Contribution Test RMS Value over 1 Period (Cycle) 35.7 [Aac] Peak Current [A] SELF MONITORING SOLID STATE SWITCHING Not applicable because electro-mechanical relays are used ACCURACY Voltage reading accuracy [%] = +/- 1 Frequency reading accuracy [%] = +/ Current reading accuracy [%] = +/-2 Power reading accuracy [%] = +/-2 Time reading accuracy [s] = +/-0.08 END OF DOCUMENT File: PVI-6000-(5000)-TL-OUTD_Certificate_C1011_100%_Rev_16-Sep-2013.doc Page 5 of 5
SSEG DETAILS (Small-Scale Embedded Generator) SSEG Type Reference: SSEG Model Reference:
Certificate UK G59/2-1 The results of tests performed according to reference standard UK G59/2-1 are summarized in this certificate. Power-One Italy S.p.a. declares that the units set for UK G59/2-1 operations
MANUFACTURER AND TEST HOUSE DETAILS
Certificate UK G83/1 The results of tests performed according to reference standard UK G83/1 are summarized in this certificate. Power-One Italy S.p.a. declares that the units set for UK G83/1 operations
ENA Engineering Recommendation G59/3 Type Verification Test Report
ref. PVI-4.2(3.6)(3.0)-TL-OUTD & Derived Models (UK G59/3 Type Verification Test Report) ENA Engineering Recommendation G59/3 Type Verification Test Report Type Approval and manufacturer/supplier declaration
PVI l-OUTD(-S)-400 PvI10.04CuTD(.s)400 SOLAR GRID TIED INVERTER. Power-One Italy S.p.A.
Power and productivity for a better 11 II II tm FID ref PVI-]2.O(1O.O-I-OUTD( -S,)-4OO & Derived Models (UK G59/3 Type VerUication Test Report,) ENA Engineering Recommendation G59/3 Type Verification Test
Grid tied inverter. Reference test report: Issued by TÜV Rheinland Italia S.r.l. on 19 th Janury 2015
Seite 1 von 5 Page 1 of 5 Type of System: System Manufacturer: Manufacturer data: Grid tied inverter Power-One Italy S.p.A. Via S. Giorgio 642, 52028 Terranuova Bracciolini (AR) - Italy Reference test
Grid tied inverter. Reference test report: Issued by TÜV Rheinland Italia S.r.l. on 10 th February 2015
Seite 1 von 7 Page 1 of 7 Type of System: System Manufacturer: Manufacturer data: Grid tied inverter Power-One Italy S.p.A. Via S. Giorgio 642, 52028 Terranuova Bracciolini (AR) - Italy Reference test
Seite 1 von 8 Page 1 of 8 Appendix 4 Type Verification Test Report (G83/2) Grid tied inverter
Seite 1 von 8 Page 1 of 8 Appendix 4 Type of System: System Manufacturer: Manufacturer data: Grid tied inverter Power-One Italy S.p.A. Via S. Giorgio 642, 52028 Terranuova Bracciolini (AR) - Italy Reference
Certificate. Inverter with integrated automatic disconnection device between a generator and the public low-voltage grid
Certificate Applicant: Product: Victron Energy B.V. De Paal 35 1351 JG Almere-Haven The Netherlands Inverter with integrated automatic disconnection device between a generator and the public low-voltage
G59/3 TYPE TEST VERIFICATION REPORT
MATERIALS & SAFETY R&D TR 141110T Page 1 of 10 G59/3 TYPE TEST VERIFICATION REPORT This Type Test sheet shall be used to record the results of the type testing of Generating Unit between 16A per phase
Harmonic current emissions as per EN
POWER QUALITY Harmonic current emissions as per EN 61000-3-2 Harmonic Test Value in Amps % of fund Limit in Amps 2 0.014 0.16 1.080 3 0.099 1.14 2.300 4 0.009 0.10 0.430 5 0.040 0.46 1.140 6 0.015 0.17
G59/3 TYPE TEST VERIFICATION REPORT. Photovoltaic Microinverter. Tel Fax
Type Tested reference number Unit technology System supplier name Address M250-60-230-S22 Photovoltaic Microinverter Enphase Energy Inc. 1420 North McDowell Blvd. Petaluma, CA USA Tel +1-707-763-4784 Fax
Page 1 of 28. Ingo Röhr. Frank Hesmer
Page 1 of 28 TEST REPORT Engineering recommendation G83/1 Recommendation for the connection of small-scale embedded generators (up to 16 A per phase) in parallel with public low-voltage distribution networks.
It includes the Generating Units supplier declaration of compliance with the requirements of Engineering Recommendation G59/3
MATERIALS & SAFETY R&D TR170801S Page 1 of 8 G59/3 Type Verification Test Report This Type Test sheet shall be used to record the results of the type testing of Generating Unit between 16A per phase and
G59/3 TYPE TEST VERIFICATION REPORT
G59/3 TYPE TEST VERIFICATION REPORT Type Tested reference number GW3048-EM, GW3648-EM,GW5048-EM System supplier name Jiangsu GoodWe Power Supply Technology Co.,Ltd. Address NO.189 Kun Lun Shan Road, Suzhou
Grid Converters for Photovoltaic
Grid Converters for Photovoltaic and Wind Power Systems by R. Teodorescu, M. Liserre and P. Rodriguez ISBN: 978 0 470 05751 3 Copyright Wiley 2011 Chapter 3 Grid Requirements for PV Grid connection requirements
G59/3 Generating Unit Type Test Sheet
G59/3 Unit Type Test Sheet Type Tested Unit(>16A per phase but 50kW 3 phase or 17kW 1 phase) This Type Test sheet shall be used to record the results of the type testing of Unit between16a per phase and
Engineering Recommendation G83/2
Engineering Recommendation G83/2 Type Approval and manufacturer/supplier declaration of compliance with the requirements of Engineering Recommendation G83/2. Type reference number STL 300 Type System Supplier
ENA G59/3 TYPE VERIFICATION TEST REPORT
ENA G59/3 TYPE VERIFICATION TEST REPORT Type approval and manufacturer/supplier declaration of compliance with the requirements of Engineering Recommendation G59/3. Unit Type reference number Unit Type
TR % L Not stated L % L % L3 2.67% L % L % L3 0.
TR 09 Page 2 of 10 Power Quality. Harmonics. SolarLake 20000TLPM Generating Unit rating per phase (rpp) Harmonic At 4555% of rated r outputt 6.6 kva % of rated outpu Harmonic % = Measured Value(Amps) *23/rating
INTERIM ARRANGEMENTS FOR GRID TIED DISTRIBUTED ENERGY RESOURCES. Technical Requirements for Grid-Tied DERs
INTERIM ARRANGEMENTS FOR GRID TIED DISTRIBUTED ENERGY RESOURCES Technical Requirements for Grid-Tied DERs Projects Division 6/29/2017 Contents 1 Definitions and Acronyms... 1 2 Technical Interconnection
Orbital GFI Inverter Series
Orbital GFI Inverter Series Datasheet Key Features One, split or three phases and up to 25 kva Superior efficiency of 95% CAN Bus control and DAQ Power quality and EMC compliance in accordance with European
Technical Requirements for Connecting Small Scale PV (sspv) Systems to Low Voltage Distribution Networks
2014 Technical Requirements for Connecting Small Scale PV (sspv) Systems to Low Voltage Distribution Networks This document specifies the technical requirement for connecting sspv to the low voltage distribution
Features PVI-55.0 PVI PVI-165.0/220.0 PVI-275.0/330.0 GENERAL SPECIFICATIONS ULTRA CORE PLUS
PVI-55.0 PVI-110.0 PVI-165.0/220.0 PVI-275.0/330.0 CORE PLUS ULTRA GENERAL SPECIFICATIONS These extremely scalable modular inverter systems, based on 55kW modular blocks, increase usable power and improve
Power-One, worldwide leader for power supplier and renewable energy products
Power-One, worldwide leader for power supplier and renewable energy products Europa Power-One Italy Spa Via S Giorgio 642 52028, Terranuova Bracciolini, Arezzo, Italy - Phone: (+39) 05591951 - Fax: (+39)
Features PVI-55.0 PVI PVI-165.0/220.0 PVI-275.0/330.0 GENERAL SPECIFICATIONS CENTRALIZED MODELS PLUS
PVI-55.0 PVI-110.0 PVI-165.0/220.0 PVI-275.0/330.0 PLUS GENERAL SPECIFICATIONS CENTRALIZED MODELS These extremely scalable modular inverter systems, based on 55kW modular blocks, increase usable power
16B2011B1 EASY HARMONICS USER MANUAL
6B0B Issued on 03/08/09 R.00 English This manual is integrant and essential to the product. Carefully read the instructions contained herein as they provide important hints for use and maintenance safety.
TEST REPORT DIN V VDE V :2006 Automatic disconnecting device
age 1 of 23 TEST REORT Automatic disconnecting device Report Reference No...: GZ10080033-1 Date of issue...: August 18, 2010 Total number of pages... 23 pages Testing Laboratory...: Address...: Tested
POWER QUALITY REPORT
Power Quality Research Lab., I-7, Wyb. Wyspiaoskiego 27, 50-370 Wrocław, Poland phone +48713202626, fax +48713202006, email: zbigniew.leonowicz@pwr.wroc.pl Facility: XXX POWER QUALITY REPORT Start Monitoring:
PAS series of 4-Quadrant Amplifiers
PAS series of 4Quadrant Amplifiers THE REAL 4QUADRANT AMPLIFIER The relating standards: IEC/EN 6132 IEC/EN 6133 IEC/EN 61311 IEC/EN 61312 IEC/EN 614611 IEC/EN 6122 IEC/EN 6144 IEC/EN 6145 IEC/EN 6148 IEC/EN
Phase-phase/phase-neutral: 24/13.8 kv star, 13.8 kv delta, 12/6.9 kv star.
Summary Of Interconnection Technical Guidelines for Renewable Energy Systems 0-100 kw under Standard Offer Contract (Extract from JPS Guide to Interconnection of Distributed Generation) This document is
HV / MV / LV electrical network quality analyzers Class A. Communication port: local, modem, integrated Ethernet, multi-point
2010 MAP Range HV / MV / LV electrical network quality analyzers Class A > Network quality Analyzers PRODUCT ADVANTAGES COMPLIANT with the EN 61000-4-30 standard, Class A DETECTION of the fault LOCATION
POWER CORPORATION. Power Quality. Specifications and Guidelines for Customers. Phone: Fax:
POWER CORPORATION Power Quality Specifications and Guidelines for Customers Phone: 403-514-3700 Fax: 403-514-3719 1 GENERAL OVERVIEW........................................ 1.1 WHAT DOES THIS SPECIFICATION
EMC Test report for LED Panel Light Models , , , , ,
4326247.50 EMC Test report for LED Panel Light Models 000529, 000530, 000531, 000532, 000535, 000536 Guangzhou, date of issue: 2016-02-24 Author:Jazz Liang By order of Marvo Verlichting B.V. at Hoogeveen,
Low Frequency Measuring System
Emission Measurements Low Frequency Measuring System Brief Overview of Phenomena............... 2 Applicable Standards................... 3 Test System Overview.................. 4 Generator Specifications.................
Harmonic Distortion Evaluations
Harmonic Distortion Evaluations Harmonic currents produced by nonlinear loads can interact adversely with the utility supply system. The interaction often gives rise to voltage and current harmonic distortion
LCE-MBP-400. User Manual. TDI Transistor Devices Inc. 85 Horsehill Road, Cedar Knolls, NJ USA Phone: Fax:
LCE-MBP-400 User Manual TDI Transistor Devices Inc. 85 Horsehill Road, Cedar Knolls, NJ 07834 USA Phone: 973.267.1900 Fax: 973.267.2047 Page 2 of 11 TABLE OF CONTENTS 1. Introduction 1.1 Description 3
VIM Series. 90 & 60 W, Efficient, CV Class 2 LED Drivers ORDERING INFORMATION
060W-12 100W-24 Nominal Input Voltage 90 &, Efficient, CV Class 2 Max. Output Power Nominal Output Voltage Max. Output Current 120 & 277 Vac 12, 24 Vdc 5, 3.75 A Efficiency up to 90% typical Max. Case
TEST REPORT AS :2005 and AS :2005 Grid connection of energy systems via inverters Grid protection requirements
TEST REPORT AS 4777.2:2005 and AS 4777.3:2005 Grid connection of energy systems via inverters Grid protection requirements Report reference No...: 09TH0459-AS4777_2 Tested by (printed name and signature)...:
Power Analysis Summary
Power Analysis Summary Introduction This is a summary of the power conditions measured with these setup parameters: Measurement File: C:\Users\fhealy\Documents\Fluke\Power Analyze\Core 2 Recording.odn
Interruptions: Voltage event where the effective value is below 10 % (or 1 % according to criteria used) of the declared nominal voltage.
Power Quality Electrical power quality is the measurement and analysis of the voltage delivered to customers. These parameters (voltage amplitude, fl icker, harmonics, unbalance) describe the voltage waveform
ISO Rules Part 500 Facilities Division 502 Technical Requirements Section Aggregated Generating Facilities Technical Requirements
Division 502 Technical Applicability 1(1) Section 502.1 applies to: Expedited Filing Draft August 22, 2017 the legal owner of an aggregated generating facility directly connected to the transmission system
Report no GZU-001. Growatt 30000TL3-S, Growatt 30000TL3-SE. Max. input current: 34A/34A 38A/38A
age 2 of 27 Rating : Model Max. DC input Voltage: 30000TL3-S, 30000TL3-SE 33000TL3-S, 33000TL3-SE Input 1000Vdc 40000TL3- NS, 40000TL3- NSE 50000TL3-S, 50000TL3-SE Max. input current: 34A/34A 38A/38A DC
Voltage Source Converter Modelling
Voltage Source Converter Modelling Introduction The AC/DC converters in Ipsa represent either voltage source converters (VSC) or line commutated converters (LCC). A single converter component is used to
Technical information SUNNY TRIPOWER CORE1-US
Technical information SUNNY TRIPOWER CORE1-US Grid Support Utility Interactive Inverters ENGLISH STP50-US-40-GridServices-TI-en-10 Version 1.0 Table of Contents SMA Solar Technology America LLC Table of
VGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION
Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current 120/277 Vac 12, 24, Vdc 5, 3.92 A Efficiency up to 90% typical Max. Case Temperature 100 C (measured at the hot spot)
EMC TEST REPORT. For. Switching Mode Power Adaptor. Model No.: 9W/14.4V/EU(18V/1.0A), 19W/14.4V/EU(12V/1.5A)
EMC TEST REPORT For Company Limited Liability «Faraday Electronics» Switching Mode Power Adaptor Model No.: 9W/14.4V/EU(18V/1.0A), 19W/14.4V/EU(12V/1.5A) Prepared For : Company Limited Liability «Faraday
Technical information SUNNY BOY 3.0-US / 3.8-US / 5.0-US / 6.0-US / 7.0-US / 7.7-US
Technical information SUNNY BOY 3.0-US / 3.8-US / 5.0-US / 6.0-US / 7.0-US / 7.7-US Grid Support Utility Interactive Inverters ENGLISH SBxx-1XP-US-40-GridServices-TI-en-15 Version 1.5 Table of Contents
Power supply circuit Through an external power supply unit V ac / 12 V dc. Operating temperature ºC. Humidity of operation
Portable Description Features Measures all of the main electrical parameters of an electricity network Measurement in true root mean square Built-in energy meter With 4 voltage channels and 4 current channels
ANCOM s Laboratory for Electromagnetic Compatibility and Radio Equipment Testing
ANCOM s Laboratory for Electromagnetic Compatibility and Radio Equipment Testing My name is Adrian Bădulescu and I have coordinated most of the activities regarding the construction, equipping and implementation
Power Quality Requirements for Connection to the Transmission System
Power Quality Requirements for Connection to the Transmission System Revision: 1.0 Date: September 2015 Introduction and Purpose of this Document The purpose of this document is to provide clarity to Customers
EMC TEST REPORT. For. Soma Medical (Sabah) Sdn Bhd ( D) UVGI AIR STERILIZER. Model No.: SM 20
EMC TEST REPORT For Soma Medical (Sabah) Sdn Bhd (1248058-D) UVGI AIR STERILIZER Model No.: SM 20 Prepared For : Soma Medical (Sabah) Sdn Bhd (1248058-D) : Block E, Lot 28, 2nd floor, Signature Office,
Company Directive STANDARD TECHNIQUE: SD1E/2. Technical Requirements for Customer Export Limiting Schemes
Company Directive STANDARD TECHNIQUE: SD1E/2 Technical Requirements for Customer Export Limiting Schemes Policy Summary This Standard Technique specifies the requirements for customer owned Export Limitation
EN50160 Individual Report Summary
EN50160 Individual Report Summary Power Frequency (x.1) Supply Voltage Variations (x.3.x) Rapid Voltage Changes (x.4.1) Flicker (x.4.2) Supply Voltage Dips (x.5) Short Interruption of Supply Voltage (x.6)
mmenda 012 erification n Test Rep port e reference number W3600S BP upplier name oodwe Powe Jiangsu Go O.189 Kun Lun w District, Jian ngsu,china
ENA Engineeringg Recom mmenda ation G883 Isssue 2 20 012 erification n Test Rep port roval and maanufacturer/ssupplier declaaration of co ompliance with the requirrements of Engineering ndation G83/2.
NI PXI-2532 Specifications
NI PXI-2532 Specifications 512-Crosspoint, 1-Wire Matrix This document lists specifications for the National Instruments PXI-2532 512-crosspoint, 1-wire matrix. All specifications are subject to change
Tripping of circuit breakers in PV installations due to zero sequence field impedance
Tripping of circuit breakers in PV installations due to zero sequence field impedance B. Verhelst 1,2, C. Debruyne 1,2, J. Desmet 1,2 1 dept. Electrical Engineering - Lemcko HoWest Kortrijk, Belgium bart.verhelst@howest.be
By order of ZHONGSHAN LIANGYI LIGHTING CO., LTD. at Zhongshan, China
4317137.50 EMC Test report for LED Fixed luminaires Models LED12036-1R, LED12036-2TU, LED120363R, LED12036-4TU2, LED12036-6TR, LED12036-1R CHR, LED12036-2TU CHR, LED12036-3R CHR, LED12036-4TU2 CHR, LED12036-6TR
E6000 E6000. Handheld Power Quality Analyzer. Features. Functions
E6000 Handheld Power Quality Analyzer The E6000 Handheld Power Quality and Energy Analyzer offer the best in power quality analysis and introduce, for the first time ever, the ability to monetarily quantify
Technical Reference Notes AIT00ZPFC-01NL. AIT00ZPFC 150W AC-DC Converter Module
AIT00ZPFC 150W AC-DC Converter Module The Power Factor Correction module is part of Astec s family of advanced modular power supply components. Featuring high reliability and convenient control and monitoring
BED INTERCONNECTION TECHNICAL REQUIREMENTS
BED INTERCONNECTION TECHNICAL REQUIREMENTS By Enis Šehović, P.E. 2/11/2016 Revised 5/19/2016 A. TABLE OF CONTENTS B. Interconnection Processes... 2 1. Vermont Public Service Board (PSB) Rule 5.500... 2
Power quality report. A Manufacturing Plant
Power quality report Prepared for A Manufacturing Plant 6 May 2016 by Dr Angelo De Francesco Power Quality Consultant Page 1 Contents 1 EXECUTIVE SUMMARY... 4 2 INTRODUCTION... 5 2.1 SITE MONITORED...
E6500 Power Quality Analyzer
E6500 Power Quality Analyzer E6500 power quality analyzer can record and analyze all power quality parameters such as harmonics, voltage, current, frequency, fluctuation, flicker, power and three-phase
Power Quality Report. A Manufacturing Plant
Power Quality Report Prepared for A Manufacturing Plant 6 May 2016 by Dr Angelo De Francesco Power Quality Consultant CHK Power Quality Pty Ltd Page 1 Contents 1 EXECUTIVE SUMMARY... 4 2 INTRODUCTION...
VLM60/40 Series. 60 & 40 W, Efficient, Compact Constant Voltage Class 2 LED Drivers
/40 Nominal Input Voltage 120/277 Vac, 220 to 240 Vac Max. Output Power Nominal Output Voltage Max. Output Current 12, 24, 48 Vdc 5, 2.5, 1.25 A Efficiency up to 90% typical Max. Case Temperature 90 C
Small-scale PV Inverters EEA Conference, Wellington. Bill Heffernan, Patrick Chen and Ankur Mishra June 2016
Small-scale PV Inverters EEA Conference, Wellington Bill Heffernan, Patrick Chen and Ankur Mishra June 2016 Introduction Concern exists regarding the effects of many inverters connecting to the LV system
NI PXI-2530 Specifications
NI PXI-2530 Specifications 128-Channel Reed Relay Multiplexer/Matrix This document lists specifications for the National Instruments PXI-2530 128-channel multiplexer/matrix module. All specifications are
EMC VERIFICATION SUMMARY Report No.: SZHH
EMC VERIFICATION SUMMARY Toy ITE Others Additional Models: 0801 to 0899 INCLUSIVE, 0804, 0804W, 0805, 0806, 0807, 0808, 0809, 0811, 0811W, 0812, 0813, 0814,0815, 0816, 0817,0817 ROOM 619, 6/F. PENINSULA
DP&L s Technical Requirements for Interconnection and Parallel Operation of Distributed Generation
DP&L s Technical Requirements for Interconnection and Parallel Operation of Distributed Generation Technical Requirements for Interconnection and Parallel Operation of Distributed Generation Single Phase
ALP-UDR Universal Detection Relay user-defined protection, automation, and monitoring
ALP-UDR Universal Detection Relay user-defined protection, automation, and monitoring The first Real-Time Protection and Automation platform that can be adapted to a wide variety of applications. While
EMC TEST REPORT. According to
EMC TEST REPORT According to EN 55014-1: 2006 EN 55014-2: 1997+A1:2001 EN 61000-3-2: 2006 EN 61000-3-3: 1995+A1:2001+A2:2005 Test Report No. Equipment : BWS-08-EC-0001 : Air cleaner Model No : AIRVAX 33X2
CE TEST CERTIFICATION
according to Certification No.: E5NC004 European Standard EN 61000-6-4:2001 EN 61000-3-2: 2000, EN 61000-3-3:1995/A1:2001 and EN 61000-6-2:2001 ( IEC 61000-4-2:1995/A1:1998, IEC 61000-4-3: 1995/A1:1998,
Series Rev 1.2 Dec. 2015
LCP General Series Features Universal Full Input Voltage Range: 90~264VAC Accurate Constant Current Output: ±5 High Efficiency : up to 90 Active Power Factor Correction Short Circuit Protection, Output
POWER QUALITY SPECIFICATIONS AND GUIDELINES FOR CUSTOMERS ENGINEERING STANDARDS CITY OF LETHBRIDGE ELECTRIC
CITY OF LETHBRIDGE ELECTRIC ENGINEERING STANDARDS POWER QUALITY SPECIFICATIONS AND GUIDELINES FOR CUSTOMERS The City of Lethbridge acknowledges the use of other utility industry and industry committee
DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS CONSTANT CURRENT, LEADING AND TRAILING EDGE DIMMABLE TROPO 15W LED DRIVER TROPO
CONSTANT CURRENT, LEADING AND TRAILING EDGE DIMMABLE DESCRIPTION TROPO switch mode power supply technology is designed to generate one constant current output from an AC input, and work with industry standard
Specification Test Conditions / Notes Min. Nominal Max. Units AC Input Voltage VAC Input Frequency 47 50/60 63 Hz Input Current
LED Driver Dual Dimming 10~W DUAL DIMMING LED DRIVERS CIELO 10W W DESCRIPTION The Cielo series of LED drivers generate one constant current output from an AC input. Dual Dimming allows the Cielo high efficiency
GRID INTERCONNECTION OF EMBEDDED GENERATION. Part 2: Small-scale embedded generation
ISBN 978-0-626-29938-5 NRS 097-2-3:2014 Edition 1 GRID INTERCONNECTION OF EMBEDDED GENERATION Part 2: Small-scale embedded generation Section 3: Simplified utility connection criteria for low-voltage connected
3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
Southern Company Power Quality Policy
Southern Company Power Quality Policy Alabama Power Georgia Power Gulf Power Mississippi Power i Table of Contents: Southern Company Power Quality Policy SCOPE AND PURPOSE... 1 DEFINITIONS... 2 I. HARMONICS...
Voltage Adjustment. Load Regulation
HIGH DENSITY, CONFIGURABLE AC-DC POWER SUPPLY RCB1200 SERIES DS RCB1200 RE02 NOEMBER 2010 Description The RCB1200 is a modular, user configurable power supply offering unrivalled performances and flexibility.
C.A Complete electrical network analysis at the tips of your fingers! Power Quality Monitor. Keeping up with the standards
Keeping up with the standards C.A 8352 Power Quality Monitor Complete electrical network analysis at the tips of your fingers! All measurements for complete analysis: powers, harmonics, flicker, symmetry,
CE TEST CERTIFICATION
Certification No.: E5DC001 according to European Standard EN 61000-6-4:2001 EN 61000-3-2: 2000, EN 61000-3-3:1995/A1:2001 and EN 61000-6-2:2001 ( IEC 61000-4-2:1995/A1:1998, IEC 61000-4-3: 1995/A1:1998,
Specification for Conducted Emission Test
1 of 10 1. EMI Receiver Frequency range 9kHz 7.0 GHz Measurement time per frequency 10 µs to 100 s time sweep, span = 0 Hz - 1 µs to 16000 s Sweep time in steps of 5 % frequency sweep, span 10 Hz - 2.5
Supervision and analyse of the electrical network EN50160 & POWER QUALITY
Supervision and analyse of the electrical network EN50160 & POWER QUALITY Controls the quality of the network following EN50160 and CEI 61000-3-6/7 Complies to the CEI 61000-4-30 class A Standard! Records
DM-5 Power Quality Analyzer
amprobe.com DM-5 Power Quality Analyzer With Feature Packed Software, most Compact High Performance Power Quality Analyzer in its Class Poor power quality is costly not only can it drive up energy bills
Power One Aurora String Inverter: energy absorption
Power One Aurora String Inverter: energy absorption Author: M. Freschi G.Marri Approver: Antonio Rossi Date: 2012/01/17 PURPOSE: This document specifies the energy absorption of the inverter when it is
08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
System Requirements for Wind Farms and Distributed Generation. Giuseppe Di Marzio
ystem Requirements for Wind Farms and Distributed Generation Giuseppe Di Marzio giuseppe.di.marzio@elraft.ntnu.no 1 Contents Grid interconnection schemes Power quality requirements Fault Level considerations
Implementation of Revised IEEE Standard 1547
MAY 31, 2017 HOLYOKE, MASSACHUSETTS Implementation of Revised IEEE Standard 1547 Presentation to ISO-TO Operations Committee David Forrest Key Points As New England adds significant amounts of Distributed
PM5000 Series. PowerLogic PM5100, PM5300 and PM5500 series
Functions and characteristics PowerLogic PM5100, PM5300 and PM5500 series PB111776 The PowerLogic applications. It provides the measurement capailities needed to allocate energy usage, perform tenant metering
Typical Efficiency (3) 350 ma 90~305 Vac 57~103Vdc 216 W 91.0% EUC-240H035DV(SV)(5)
EUC240HxxxDV(SV) Features Ultra High Efficiency (Up to 91.0%) Six Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Lightning Protection AllAround Protection: SCP, OTP,
Power quality measurements in a singlehouse
24th International Conference & Exhibition on Electricity Distribution (CIRED) 12-15 June 2017 Session 2: Power quality and electromagnetic compatibility Power quality measurements in a singlehouse microgrid
SAMSUNG ELECTRO-MECHANICS CO., LTD
Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OVP/OTP/SCP ㅡ 0-10V Dimming Control ㅡ IP67 ㅡ
LB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
Impact of High PV Penetration on Grid Operation. Yahia Baghzouz Professor of Electrical engineering University of Nevada Las Vegas
Impact of High PV Penetration on Grid Operation Yahia Baghzouz Professor of Electrical engineering University of Nevada Las Vegas Overview Introduction/Background Effects of High PV Penetration on Distribution
Technical information Grid Support Utility Interactive Inverters for Sunny Central-US and Sunny Central Storage-US
Technical information Grid Support Utility Interactive Inverters for Sunny Central-US and Sunny Central Storage-US ENGLISH SC-US-GridServices-TI-en-10 Version 1.0 Table of Contents SMA Solar Technology
Holiday Detector mod. 184/45KV
Holiday Detector mod. 184/45KV Telemagnetica S.r.l. Via Teocrito, 36-20128 Milan - Italy Tel: +39-022552900 - Fax: +39-022553097 e-mail: info@telemagnetica.com - http:// January 2013 BR-184-14-45KV-ENG-00
NI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer
NI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer This document lists specifications for the NI PXI-2797 terminated multiplexer module. All specifications are subject to change without
Summary of testing: Testing location: Intertek Testing Services Taiwan Ltd.
age 2 of 40 Summary of testing: Tests performed (name of test and test clause): 5.4.3 System reactions flicker 5.4.4 System reactions harmonics and interharmonics 5.4.9 System reactions precautionary measures
ISO Rules Part 500 Facilities Division 502 Technical Requirements Section Wind Aggregated Generating Facilities Technical Requirements
Applicability 1(1) Section 502.1 applies to the ISO, and subject to the provisions of subsections 1(2), (3) and (4) to any: (a) a new wind aggregated generating facility to be connected to the transmission
9 Specifications. Specifications NOMINAL CHARACTERISTICS
9 Specifications Specifications NOMINAL CHARACTERISTICS WARRANTED CHARACTERISTICS Nominal characteristics describe parameters and attributes that are guaranteed by design, but do not have associated tolerances.