Specification Test Conditions / Notes Min. Nominal Max. Units AC Input Voltage VAC Input Frequency 47 50/60 63 Hz Input Current

Size: px
Start display at page:

Download "Specification Test Conditions / Notes Min. Nominal Max. Units AC Input Voltage VAC Input Frequency 47 50/60 63 Hz Input Current"

Transcription

1 LED Driver Dual Dimming 10~W DUAL DIMMING LED DRIVERS CIELO 10W W DESCRIPTION The Cielo series of LED drivers generate one constant current output from an AC input. Dual Dimming allows the Cielo high efficiency drivers to be used with compatible 010V or TRIAC/ELV dimmers. KEY FEATURES 1/20/7VAC Input Dims with TRIAC and ELV dimmers at 1VAC only Dims with industry standard 010V dimmers (108305VAC) Max Output Power: 10W to W 2 case sizes, 1030W and 40W Efficiency up to 84% 90 C Top case rated <% THD, >0.9 PF Fast start up time UL 87 Approved, UL LED Class 2 outputs Class II isolation Long Life RoHS Compliant APPLICATIONS AND BENEFITS Cielo LED drivers are designed for powering LED luminaries using standard lighting controls. Their discreet size easily fits into the space constrained LED fixtures of today s growing Commercial, Residential and Architectural lighting markets. The modules operate with: Standard Light Switches 010V Dimmers Triac based Incandescent Dimmers (Forward phase leading edge) Electronic Low Voltage Dimmers (Reverse Phase trailing edge) The following diagram depicts a typical installation utilizing the Cielo: Control Input Line Dimmer ~ 010V Dimming Cielo s Dimming Options: LED Module + LED L Constant Current Output Cielo AC Input Analog Dimming (010V) input provides 10100% Iout Dimming AC line dimming from Triac or ELV dimmers (1VAC) Dimming range down to less than 10% nominal output current LED Driver LED N Page DS1_Cielo_rev10, April 17

2 LED Driver Dual Dimming 10~W DUAL DIMMING LED DRIVERS CIELO 10W W MODEL CODING AND OUTPUT RATINGS 30W 16 W 10 15W Model Number RCL01002A RCL01300A RCL013A RCL013B RCL01440A RCL01440B RCL003A RCL004A RCL000A RCL00600A RCL00A RCL03000A RCL03005A RCL03006A RCL0300A RCL0300B RCL0300C RCL A RCL B RCL A 41 W 31 40W Model Number RCL0400B RCL A RCL04008A RCL A RCL A RCL010A RCL010A RCL01400A RCL01400B Pout Max Iout Vout Min (W) (ma) 10 to 30W Housing Vout Max Vout No_Load Pout Max Iout Vout Min (W) (ma) 31 to W Housing Vout Max Vout No_Load Page DS1_Cielo_rev10, April 17

3 LED Driver Dual Dimming 10~W INPUT SPECIFICATIONS Specification Test Conditions / Notes Min. Nominal Max. Units AC Input Voltage VAC Input Frequency 47 /60 63 Hz Input Current 1VAC (1030W models) 0.35 A Inrush Current (1030W models) 1VAC (31W models) 1VAC Half Value time: 0µs 230VAC Half Value time: 1µs 7VAC Half Value time: 1µs 1VAC Half Value time: 0µs Inrush Current 230VAC Half Value time: 2µs (31W models) 7VAC Half Value time: 2µs 1VAC Rated Load THD* 230VAC Rated Load 7VAc Rated Load 31W models Efficiency 1530W models 1015W models 1VAC Rated Load Power Factor* 230VAC Rated Load 7VAC Rated Load * please Refer to KPD for further details OUTPUT SPECIFICATIONS Specification Test Conditions / Notes Min. Nom. Max. Units Output Power Rating 1030W models W models.4 W Output Voltage 1030W models 14 31W models V Output Current 1030W models W models 1400 ma Ripple Current Iout_Pkpk/RMS (except for models identified in the table below) 40 % Output Regulation ±5 %Iout Startup time With no dimmer connected ms Model # Ripple Current Pkpk/RMS (%) RCL000A 55 RCL00600A 45 RCL00A RCL0300A 65 RCL0300C 45 RCL0300B 45 RCL A 70 RCL B 60 RCL A 70 RCL A 60 RCL01400A 70 RCL01400B 60 PROTECTION FEATURES Specification Test Conditions / Notes Min. Nominal Max. Units Output ShortCircuit Hiccup, Auto recovery OverTemperature Top Case The output current of the driver will be reduced in order to limit case temperature rise, Auto recovery >90 C Iout OverShoot During power on or power off 10 % No Load Unit will not exceed the Vout Max Vout No_Load rating V_No_Load V Isolation PrimarytoSecondary Reinforced/double Insulation meets IEC/EN Class II Apk Apk % %

4 LED Driver Dual Dimming 10~W LINE DIMMING 1V AC Dimming of the driver is possible with standard TRIAC based incandescent dimmers that chop the AC voltage, or with ELV dimmers. During the rapid rise time of the AC voltage when the dimmer turns on, the driver does not generate any voltage or current oscillations, and inrush current is controlled. During the ontime of the AC input, the driver regulates the output. The RMS value of the driver output current is proportional to the ontime of the AC input voltage. The RMS output current varies depending upon the conduction angle and RMS value of the applied AC input voltage. Forward PhaseControl (Leading Edge) Reverse PhaseControl (Trailing Edge) Chopped AC Input to Driver Chopped AC Input to Driver AC Wall Power AC Wall Power Conduction (Degrees) Conduction (degrees) COMPATIBLE LINE DIMMERS: 1VAC Dimmers only Mfg. Model Mfg. Model Mfg. Model Lutron S603PG Lutron DVELV303P Lutron CT103P Leviton IPI061LZ Lutron SELV300P Cooper SLC03P Leviton Leviton 6683IW Leviton IPE04 Lutron DVCL153P Leviton 6161 Lutron MAELV600 Lutron DV600P Leviton 6633P Lutron FAELV0 Lutron TGCL153P Lutron TG600P Lightolier ZP260QEW Lutron S600P Cooper DLC03P Cooper DAL06P Leviton VPE06 Lutron LG600P

5 LED Driver Dual Dimming 10~W 010V DIMMING The dimming inputs (purple/grey wires) can be used to adjust the output setting via a standard commercial wall dimmer, an external control voltage source (0 to 10VDC), or a variable resistor. Any dimmer must capable of sinking 1mA per driver from the dimming wires. This input permits 100% to 1% dimming. With the dimming input at 1V, the output will dim to 10% of nominal current. At a dimming input of 0.1V, the output current shall decrease to 1% of nominal current. Approved Dimmers: Lutron (Part Number Nova NFTV); Lutron (Part Number Diva DVTV); Leviton (llumatech IP710DL) RESISTOR DIMMING The following graphs show the relationship between the value of the resistor connected across the dimming input versus the output current of a single driver. Cielo 1030W Models Cielo 40W DIMMING NOTES 1. The length of the dimming circuit wiring, wire size and the number of drivers connected to the dimming control must be designed so that the total voltage drop is less than 0.3V between the drivers and the dimming control. 2. Line dimming and 010V dimming interfaces cannot be used at the same time. 3. Trimming of the output current with the resistor applied on the 010V wires is not permitted.

6 LED Driver Dual Dimming 10~W MECHANICAL DETAILS 10W TO 30W MODELS (RCL010, RCL0, RCL030) Enclosure Material: Plastic I/O Connections: Flying leads Ingress Protection: IP, UL damp rated Weight: 154 g = 5.4 oz Dimensions: 84 x 40 x 25.2 mm 3.30 x 1.57 x 0.99 in MECHANICAL DETAILS 40W TO W MODELS (RCL040, RCL0) Enclosure Material: Plastic I/O Connections: Flying leads Ingress Protection: IP, UL damp rated Weight: 222 g = 7.8 oz Dimensions: 87 x 60 x.2 mm 3.47 x 2.36 x 1.07 in

7 LED Driver Dual Dimming 10~W ENVIRONMENTAL SPECIFICATIONS Specification Test Conditions / Notes Min Nom Max Units Top Case Temperature Range Refer to the Top Case measurement point C Storage Temperature C Operating Relative Humidity Noncondensing 5 95 % Surface Temperature Exposed surfaces temperature under all operating conditions 90 C Cooling Convection cooled Shock EN Operating: Half sine, 30 g, 18 ms, 3 axes, 6x each (3 positive and 3 negative). NonOperating: Half sine, g, 11 ms, 3 axes, 6x each (3 positive and 3 negative). Vibration EN Operating: 5 0Hz, 1gRMS (0.02 g2/hz), 3 axes, 30 min. NonOperating: 5 0Hz, 2.46gRMS ( g2/hz), 3 axes, 30 min. Vibration EN Operating Sine, 10 0Hz, 1g, 3 axes, 1 oct/min., 60 min. MTBF Rated Load, 70 C Top Case, Bellcore 2k Hours Useful Life 70 C Top Case. k Hours ELECTROMAGNETIC COMPATIBILITY (EMC) EMISSIONS Phenomenon Conditions / Notes Standard Equipment Performance Class Conducted and Radiated Emission Test at 230VAC EN515 Conducted and Radiated Emission Test at 1VAC FCC CFR47 part 15/subpart B Class B Conducted and Radiated Emission Test at 7VAC FCC CFR47 part 15/subpart B Class A Harmonic Current Emissions EN61000 Class C Voltage Changes, Fluctuation and Flicker EN ELECTROMAGNETIC COMPATIBILITY (EMC) IMMUNITY Phenomenon Conditions / Notes Standard Note Equipment for general lighting purposes EMC Immunity Requirements EN ESD (Electrostatic Discharge) EN Radiated RadioFrequency electromagnetic field EN Electric Fast Transient / Burst 2kV on AC input EN Surge Level ±1.5kV LN EN Conducted disturbances induced by RadioFrequency fields EN Voltage Dips, short interruptions and Voltage Variations EN Nonrepetitive damped oscillatory transient, Ring wave 2.5kV ANSI C Category A SAFETY AGENCIES APPROVALS Certification Body Safety Standards Category UL Recognized ANSI / UL87, 1 st Ed., CSA C22.2 No.3, 7 th Ed. Models with output voltages <60 VDC include UL and CSA approval (curus) as LED Class 2 output LED Driver suitable for dry and damp location To obtain the CE Declaration of Conformity please contact info@efore.com IEC/EN electronic control gear for LED Modules IEC/EN DC or AC supplied electronic control gear for LED modules Performance Requirements Specifications appearing in EFORE s catalogues and brochures as well as any oral statements are not binding. All descriptions, drawings and other particulars (including dimensions, materials and performance data) given by EFORE are as accurate as possible but, being given for general information, and are not binding on EFORE. EFORE makes thus no representation or warranty as to the accuracy of such material. We assume no liability other than as agreed in the terms of the individual contracts and we reserve the right to make technical modifications in the course of our product development. Our product information solely describes our goods and services and is in no way to be construed or interpreted as a quality or condition guarantee. The aforesaid shall not relieve the customer of its obligation to verify the suitability of our Products for the use or application intended by the purchaser. Customers are responsible for their products and applications. EFORE assumes no liability from the use of its products outside of specifications. No license is granted to any intellectual property rights by this document.

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS. Cielo LED Driver DUAL DIMMING LED DRIVERS CIELO 10W 50W

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS. Cielo LED Driver DUAL DIMMING LED DRIVERS CIELO 10W 50W DESCRIPTION The Cielo series of LED drivers generate one constant current output from an AC input. Dual Dimming allows the Cielo high efficiency drivers to be used with compatible 010V or TRIAC/ELV dimmers.

More information

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS CONSTANT CURRENT, LEADING AND TRAILING EDGE DIMMABLE TROPO 15W LED DRIVER TROPO

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS CONSTANT CURRENT, LEADING AND TRAILING EDGE DIMMABLE TROPO 15W LED DRIVER TROPO CONSTANT CURRENT, LEADING AND TRAILING EDGE DIMMABLE DESCRIPTION TROPO switch mode power supply technology is designed to generate one constant current output from an AC input, and work with industry standard

More information

STRATO 70W LED P DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS MODEL CODING AND OUTPUT RATINGS TRC ELECTRONICS, INC

STRATO 70W LED P DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS MODEL CODING AND OUTPUT RATINGS TRC ELECTRONICS, INC STRATO 70W LED P S DESCRIPTION STRATO switch mode driver technology is designed to generate one constant voltage output from a wide range AC input. The size and performance of these products make them

More information

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS. STRATO LED Driver CONSTANT CURRENT, 0-10V DIMMABLE STRATO 35W LED DRIVERS

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS. STRATO LED Driver CONSTANT CURRENT, 0-10V DIMMABLE STRATO 35W LED DRIVERS CONSTANT CURRENT, 010V DIMMABLE DESCRIPTION STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products

More information

DESCRIPTION KEY FEATURES MODEL CODING AND OUTPUT RATINGS PROGRAMMABLE 50W LED DRIVER MESO 50W

DESCRIPTION KEY FEATURES MODEL CODING AND OUTPUT RATINGS PROGRAMMABLE 50W LED DRIVER MESO 50W DESCRIPTION The LED drivers are designed to generate one constant current output from an AC input, and work with most industry standard lighting controls in dimming applications. Optional Remote Gear and

More information

Ozone 150W is designed for directly powering LEDs in Indoor Lighting for Large Areas, Street & Urban Lighting and Industrial lighting.

Ozone 150W is designed for directly powering LEDs in Indoor Lighting for Large Areas, Street & Urban Lighting and Industrial lighting. DESCRIPTION Ozone 150W LED drivers are designed to make LED fixture design easy. With universal input voltage, wide range output and a list of exceptional features, they take the trial and error out of

More information

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS STRATO EVO PRELIMINARY

DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS STRATO EVO PRELIMINARY CONSTANT CURRENT, 010V DIMMABLE RTLD0401400ASARF DESCRIPTION STRATO EVO 40W switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance

More information

Tri-Mode Dimming (0-10 V & TRIAC/ELV) Constant Current LED Drivers with Fast Startup Time

Tri-Mode Dimming (0-10 V & TRIAC/ELV) Constant Current LED Drivers with Fast Startup Time Input& Voltage 90#to#305# Vac# maximum Max.& Output& Power Output& Voltage 60#W 19#to#56# Vdc Output& Current 280#mA# to#1.4#a# CC Efficiency #87%# typical CC: Constant Current Max.&Case& Temperature 90

More information

ESPV Series. 40 to 60 W Constant Current LED Drivers with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Case Temperature THD

ESPV Series. 40 to 60 W Constant Current LED Drivers with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Case Temperature THD Nominal Input Voltage Max. Output Power Output Voltage Output Current Efficiency Max. Case Temperature THD Power Factor Dimming Method Dimming Range Startup Time 120 to 277 Vac 60 W 24 to 42 Vdc 1.05 A

More information

ESPT Series. 40 to 60 W Constant Current LED Drivers with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Case Temperature THD

ESPT Series. 40 to 60 W Constant Current LED Drivers with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Case Temperature THD ESPT ESPT050 Nominal Input Voltage Max. Output Power Output Voltage Output Efficiency Current Max. Case Temperature THD Power Factor Dimming Method Dimming Range Startup Time 120 to 277 Vac, 220 to 240

More information

ESS/ESST Series. 6 to 40 W Constant Current LED Drivers with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Case Temperature THD

ESS/ESST Series. 6 to 40 W Constant Current LED Drivers with Tri-Mode Dimming (TRIAC, ELV & 0-10 V) Max. Case Temperature THD Nominal Input Voltage 120 to 277 Vac, 220 to 240 Vac Max. Output Power 40 W Output Voltage 6 to 56 Vdc Output Current 180 ma to 2.1 A CC Efficiency up to 87% typical CC: Constant Current Max. Case Temperature

More information

VGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION

VGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current 120/277 Vac 12, 24, Vdc 5, 3.92 A Efficiency up to 90% typical Max. Case Temperature 100 C (measured at the hot spot)

More information

HEC-35LTA-XXTSAA Rev A

HEC-35LTA-XXTSAA Rev A A. Features High Efficiency (Up to 87%). Active Power Factor Correction (Typical 0.95). Isolation Class II. All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP20 and dry location.

More information

Model and Output Power Output Nominal Voltage Package Option Means of Protection Grade. 12 V DC: -US12 Open Frame: -OF. 24 V DC: -US24 U-Chassis: -UC

Model and Output Power Output Nominal Voltage Package Option Means of Protection Grade. 12 V DC: -US12 Open Frame: -OF. 24 V DC: -US24 U-Chassis: -UC 2XMOPP MEDICAL, 400 W ACDC COMPACT, EFFICIENT POWER SUPPLY MDP400 SERIES DESCRIPTION The MDP400 series of medical ACDC power supplies feature a compact form factor, high conversion efficiency and 2x MoPP

More information

HEC-30/35LTA-33TDAA Rev A

HEC-30/35LTA-33TDAA Rev A A. Features High Efficiency (Up to 86%). Active Power Factor Correction (Typical 0.95). Isolation Class II All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated metal case with IP20 and dry location. 1-10V,

More information

Power Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes

Power Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes Features Trailing Edge AC Dimmable Constant Current Output High Efficiency (Up to 86%) Active Power Factor Correction (Up to 0.95) All-Around Protection: OVP, SCP and OLP Description The series operates

More information

VIM Series. 90 & 60 W, Efficient, CV Class 2 LED Drivers ORDERING INFORMATION

VIM Series. 90 & 60 W, Efficient, CV Class 2 LED Drivers ORDERING INFORMATION 060W-12 100W-24 Nominal Input Voltage 90 &, Efficient, CV Class 2 Max. Output Power Nominal Output Voltage Max. Output Current 120 & 277 Vac 12, 24 Vdc 5, 3.75 A Efficiency up to 90% typical Max. Case

More information

VLM60/40 Series. 60 & 40 W, Efficient, Compact Constant Voltage Class 2 LED Drivers

VLM60/40 Series. 60 & 40 W, Efficient, Compact Constant Voltage Class 2 LED Drivers /40 Nominal Input Voltage 120/277 Vac, 220 to 240 Vac Max. Output Power Nominal Output Voltage Max. Output Current 12, 24, 48 Vdc 5, 2.5, 1.25 A Efficiency up to 90% typical Max. Case Temperature 90 C

More information

DDP400 SERIES KEY FEATURES DESCRIPTION MARKET SEGMENTS AND APPLICATIONS

DDP400 SERIES KEY FEATURES DESCRIPTION MARKET SEGMENTS AND APPLICATIONS 400 W ACDC COMPACT, EFFICIENT POWER SUPPLY DDP400 SERIES KEY FEATURES Universal input voltage range (85 264 V AC ) Active PFC, EN 6100032 Class C, D compliant Steady 400W output power (440 W peak) INDUS

More information

HEC-45LTN-45PFAS Rev A

HEC-45LTN-45PFAS Rev A A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class

More information

HEC-100RTA-48QSCA Rev A1.0

HEC-100RTA-48QSCA Rev A1.0 HEC100RTA48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case

More information

SAMSUNG ELECTRO-MECHANICS CO., LTD

SAMSUNG ELECTRO-MECHANICS CO., LTD Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OVP/OTP/SCP ㅡ 0-10V Dimming Control ㅡ IP67 ㅡ

More information

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up

More information

Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current

Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current LED Optimized Drivers 40 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : 40W

More information

Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current

Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current LED Optimized Drivers 25 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH 25W Model: Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : 25W

More information

IP67 DESCRIPTION KEY FEATURES MARKET SEGMENT AND APPLICATIONS TRC ELECTRONICS, INC

IP67 DESCRIPTION KEY FEATURES MARKET SEGMENT AND APPLICATIONS TRC ELECTRONICS, INC DESCRIPTION DDP400HV is a series of high efficiency, small form factor AC DC power supplies operating at 277/347/480V AC inputs. The series provides a steady 400 W of regulated DC power through the full

More information

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy SAM Listed Model: LD12W - LD200W Series Environmental Strip Lighting Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Output Power: 12-200W Max. Output Voltages: 12VDC or 24VDC Optional

More information

HEC-40LTN-XXPSCA Rev A

HEC-40LTN-XXPSCA Rev A HEC40LTNXXPSCA Rev A A. Features High Efficiency (Up to 89%). Active Power Factor Correction (Typical 0.95). Isolation Class II AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP67

More information

Environmental. Electrical Specifications at 25 O C E Output Constant Current

Environmental. Electrical Specifications at 25 O C E Output Constant Current LED Optimized Drivers 40 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : 40W

More information

Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current

Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current LED Optimized Drivers 40 Watt - Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage : 40W Max. Input Voltage: 90 to 305VAC, 47-63Hz Number of Outputs: One Output Voltages: 3VDC -

More information

Typical Efficiency (1) 350 ma 90 ~ 305 Vac 60~120Vdc 42 W 90.0% LUC-042S035DTG(STG)(2)

Typical Efficiency (1) 350 ma 90 ~ 305 Vac 60~120Vdc 42 W 90.0% LUC-042S035DTG(STG)(2) Features High Efficiency (Up to 90%) Active Power Factor Correction (Typical 0.95) Constant Output Current IP54(Potted) Dimming Control (010V) AllAround Protection: OVP,SCP, OTP Class 2 Output Unique Package

More information

DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies.

DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies. SEALED, 400W, IT AND 2XMOPP MEDICAL RATED ACDC POWER SUPPLY KEY FEATURES Universal input voltage range (90 264 V AC ) Input surge current limiting 400 W rated power (440 W peak up to 10 s) High efficiency

More information

Environmental. Electrical Specifications at 25 O C E Output Constant Current

Environmental. Electrical Specifications at 25 O C E Output Constant Current LED Optimized Drivers 75 Watt - 75W Model: Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Corrected 2-Stage Switch Mode : 75W Max. Input Voltage: 90 to 305VAC, 47-63Hz Number

More information

200W. 200 Watt - LD200W Series CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH DIMMING. LED Optimized Drivers. LD200W Series.

200W. 200 Watt - LD200W Series CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH DIMMING. LED Optimized Drivers. LD200W Series. LED Optimized Drivers 200 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 200W Drive Mode: Constant Current or Constant Voltage Technology: PFC Corrected 2-Stage Switch

More information

150W. 150 Watt - LD150W Series CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH DIMMING. LED Optimized Drivers. LD150W Series.

150W. 150 Watt - LD150W Series CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH DIMMING. LED Optimized Drivers. LD150W Series. LED Optimized Drivers 150 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 150W Drive Mode: Constant Current or Constant Voltage Technology: PFC Corrected 2-Stage Switch

More information

HEC-150RTN-48QSCA. A. Features. B. Description. C. Models. D. Electronic Specifications - Input Specifications

HEC-150RTN-48QSCA. A. Features. B. Description. C. Models. D. Electronic Specifications - Input Specifications HEC130/150RTN48QSCA A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case with

More information

Environmental. Electrical Specifications at 25 O C TYPE HL. Output Constant Current. Output Voltage Range

Environmental. Electrical Specifications at 25 O C TYPE HL. Output Constant Current. Output Voltage Range Model: Series Drive Mode: Constant Current or Constant Voltage : 40W Max. Input Voltage: 347 to 480VAC, 50/60 Hz Number of Outputs: One Output Voltages: 3VDC - 130VDC Output Currents: 300mA - 4450mA Optional

More information

PRELIMINARY. S050W-054C1400-L03-UN-D2 50W Programmable Driver. Electrical Specifications. Protections. Environmental Specifications.

PRELIMINARY. S050W-054C1400-L03-UN-D2 50W Programmable Driver. Electrical Specifications. Protections. Environmental Specifications. Rev 2-23-217 Electrical Specifications Maximum Power: 5W Typical Efficiency: 87% Input Voltage Range: 12-277 Vac ± 1% Frequency: Power Factor: Inrush Current: Input Current (Max): 5/6 Hz >.9 @ 8-1% load,

More information

SAMSUNG ELECTRO-MECHANICS CO., LTD

SAMSUNG ELECTRO-MECHANICS CO., LTD Model Name : Features : ㅡ UL8750 / UL1310 Class 2 and CE Class Ⅱ ㅡ Full-protection provided: OCP/OVP/OTP/SCP ㅡ Meets safety requirements for lighting ㅡ Constant Voltage Type ㅡ 5 years warranty ㅡ IP67 Grade

More information

Max. Output Power. Efficiency (2) 350 ma 249 ~ 528 Vac 107~214Vdc 75 W 87.0% ESC-075S035DT(ST)

Max. Output Power. Efficiency (2) 350 ma 249 ~ 528 Vac 107~214Vdc 75 W 87.0% ESC-075S035DT(ST) ESC075SxxxDT(ST) Features High Efficiency (Up to 87%) Active Power Factor Correction (0.95 Typical) Constant Current Output 010V Dimming Control Input Surge Protection: 4kV lineline, 6kV lineearth AllAround

More information

Typical Efficiency (2) 350 ma 90 ~ 305 Vac 57~114Vdc 160 W 92.0% EUC-160Q035DT(ST)(4)

Typical Efficiency (2) 350 ma 90 ~ 305 Vac 57~114Vdc 160 W 92.0% EUC-160Q035DT(ST)(4) EUC160QxxxDT(ST) Features Ultra High Efficiency (Up to 92%) Four Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Lightning Protection AllRound Protection: SCP, OTP,

More information

HEC-70LCN-350TDAF Rev B

HEC-70LCN-350TDAF Rev B A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Up to 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP Fully isolated metal case with IP20 and dry location. Class 2

More information

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis

More information

Environmental. Electrical Specifications at 25 O C TYPE TL TYPE HL. Output Voltage. Output Constant Current

Environmental. Electrical Specifications at 25 O C TYPE TL TYPE HL. Output Voltage. Output Constant Current LED Optimized Drivers 96 Watt - Model: Environmental 96W Drive Mode: Constant Current or Constant Voltage Technology: PFC Corrected -Stage Switch Mode : 96W Max. Input Voltage: 90 to 305VAC, 47-63Hz Number

More information

The technology allows for flexible current setpoint characteristics while maintaining compliance with the requirements for a NEC Class 2 output.

The technology allows for flexible current setpoint characteristics while maintaining compliance with the requirements for a NEC Class 2 output. Special Features The SPECTRA Intelligent LED Driver generates 4 constant current DC outputs from a DC input with high user friendly degree User settable Output Currents between 350mA and 1350mA for each

More information

50W Constant Current (700mA) Dimming LED Driver

50W Constant Current (700mA) Dimming LED Driver 50W Constant Current (700mA) Dimming LED Driver IZC070-050A-9267C-SA Product Overview The IZC070-050A-9267C-SA operate from a 90-305 Vac input range. This unit will provide up to a 700mA of output current

More information

3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)

3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance) FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W

More information

Power Factor (1) Efficiency (1)

Power Factor (1) Efficiency (1) LUC012SxxxDSP(SSP) Rev. B Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current High Efficiency Active Power Factor Correction AllRound Protection: OLP, SCP and Open Lamp Protection

More information

Typical Efficiency (2)

Typical Efficiency (2) EUC030SxxxDTM Features Low THD, 10% Max up to 240 Vac Compact Metal Case with Excellent Thermal Performance Isolated 010V Dimmable Input Surge Protection: 4kV lineline, 6kV lineearth High Reliability &

More information

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC

More information

Typical Efficiency (2)

Typical Efficiency (2) EUC144QxxxDT(ST) Features Ultra High Efficiency (Up to 91.0%) Four Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Lightning Protection AllAround Protection: SCP,

More information

Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter

Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide

More information

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel

More information

Constant current LED Drivers For outdoor use

Constant current LED Drivers For outdoor use FEATURES: Constant current output Input voltage range: 90-305Vac Short circuit, over current, over voltage and over temperature protections Designed to worldwide safety standards for lighting Active power

More information

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation

More information

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation

More information

Typical Efficiency (2) Max. Output Power. 24 Vdc 90 ~ 305 Vac 0~1080mA 26 W 84% EUV-026S024PS(3)

Typical Efficiency (2) Max. Output Power. 24 Vdc 90 ~ 305 Vac 0~1080mA 26 W 84% EUV-026S024PS(3) EUV026SxxxPS Features High Efficiency (Up to 86%) Active Power Factor Correction (Typical 0.95) Constant Output Voltage Waterproof (IP66) and Damp Location AllAround Protection: OVP, SCP, OCP Class 2 and

More information

TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3

TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3 , Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3

More information

Features. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter

Features. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection

More information

DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.

DSA150 Series. xxx Series. 150 Watts.   AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125. 15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty

More information

Max. Output Power. Efficiency (2) 350 ma 90~305 Vac 14~29 Vdc 10 W 80% 0.94 LUC-010S035DSM(SSM)

Max. Output Power. Efficiency (2) 350 ma 90~305 Vac 14~29 Vdc 10 W 80% 0.94 LUC-010S035DSM(SSM) LUC010SxxxDSM(SSM) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OLP, SCP and Open Lamp Protection

More information

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection

More information

Typical Efficiency (1) 350 ma 90 ~ 305 Vac 38~75 Vdc 26 W 86% EUC-026S035DS(PS)(4)(8)

Typical Efficiency (1) 350 ma 90 ~ 305 Vac 38~75 Vdc 26 W 86% EUC-026S035DS(PS)(4)(8) EUC026SxxxDS(PS) Features High Efficiency (Up to 86%) Second Generation with Improved Performance Active Power Factor Correction (Typical 0.95) Constant Output Current Waterproof (IP66) and Damp Location

More information

DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details

DSR120 Series. xxx Series. 120 Watts.   AC-DC Power Supplies. Models & Ratings. Mechanical Details 120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable

More information

Power Factor (1) Efficiency (1) 350 ma 90 ~ 305 Vac 17~ 34 Vdc 12 W 81% 0.94 LUC-012S035DSM(SSM)

Power Factor (1) Efficiency (1) 350 ma 90 ~ 305 Vac 17~ 34 Vdc 12 W 81% 0.94 LUC-012S035DSM(SSM) LUC012SxxxDSM(SSM) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OLP, SCP and Open Lamp Protection

More information

L.T.F All-In-One Dimmable LED UNIdriver - CLASS 2

L.T.F All-In-One Dimmable LED UNIdriver - CLASS 2 All-In-One Dimmable LED UNIdriver - CLASS 2 25W DS25W UNIdriver 100-305V Series Constant FEATURES All-In-One dimming capabilites; Triac, ELV, and 0-10V dimming Universal input voltage; 100-305V AC Isolated

More information

Output Voltage* (nom.)(adjustable)

Output Voltage* (nom.)(adjustable) Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic

More information

Power Factor (1) Efficiency (1) Parameter Min. Typ. Max. Notes A Measured at full load and 100 Vac input

Power Factor (1) Efficiency (1) Parameter Min. Typ. Max. Notes A Measured at full load and 100 Vac input LUC018SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllRound Protection: OVP, SCP and Open Lamp Protection

More information

Max. Output Power. Typical Efficiency (2) 500 ma 90 ~ 305 Vac 60 ~ 120 Vdc 60 W 90.0% EUC-060S070STM0004

Max. Output Power. Typical Efficiency (2) 500 ma 90 ~ 305 Vac 60 ~ 120 Vdc 60 W 90.0% EUC-060S070STM0004 EUC060SxxxSTM000x Features Low THD, 10% Max up to 240 Vac Compact Metal Case with Excellent Thermal Performance Input Surge Protection: 4kV lineline, 6kV lineearth High Reliability & Long Lifetime: 85,800

More information

4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p

4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up

More information

Typical Efficiency (2)

Typical Efficiency (2) LUC042SxxxDSW(SSW) Rev. B 42W Constant Current IP20 Driver Features High Efficiency (Up to ) Active Power Factor Correction (Typical 0.95) Cascade Connection Adjustable Constant Output Current with Dip

More information

Features. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter

Features. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage

More information

L.T.F Dimmable Low Voltage UniDriver- CLASS 2

L.T.F Dimmable Low Voltage UniDriver- CLASS 2 Dimmable Low UniDriver- CLASS 2 12W DS12W Unidriver 100-305V Series Constant / Constant FEATURES All-In-One dimming capabilites; Triac, ELV, and 0-10V dimming Universal input voltage; 100-305V AC Isolated

More information

08/07/2015

08/07/2015 17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external

More information

Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter

Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise

More information

Power Factor (2) Efficiency (2) 25~ 49 Vdc 66 W 87 % 0.96 LUC-066T045DDM(SDM) 20~ 40 Vdc 66 W 86 % 0.96 LUC-066T056DDM(SDM)

Power Factor (2) Efficiency (2) 25~ 49 Vdc 66 W 87 % 0.96 LUC-066T045DDM(SDM) 20~ 40 Vdc 66 W 86 % 0.96 LUC-066T056DDM(SDM) Features 0 10V Dimmable (Compatible with Passive Dimmers) 5% Minimum Dimming Level Three Channels of Constant Current Output High Efficiency (Up to 87%) Active Power Factor Correction (0.96 Typical) Waterproof

More information

LB115S 115W Single Output

LB115S 115W Single Output Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved

More information

Features. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter

Features. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical

More information

IEC/EN/UL60950 & CE certified, EN55032 Class B

IEC/EN/UL60950 & CE certified, EN55032 Class B Features Regulated Converter Universal input VAC 3W PCB mount package

More information

Features. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter

Features. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International

More information

Power Factor (2) Typical Efficiency (2) 350 ma 90 ~ 305 Vac 36~72 Vdc 25 W 86 % 0.94 LUC-024S035DSP(SSP) (3)

Power Factor (2) Typical Efficiency (2) 350 ma 90 ~ 305 Vac 36~72 Vdc 25 W 86 % 0.94 LUC-024S035DSP(SSP) (3) LUC024SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OVP, SCP and Open Lamp Protection

More information

Typical Efficiency (3) 350 ma 90~305 Vac 57~103Vdc 216 W 91.0% EUC-240H035DV(SV)(5)

Typical Efficiency (3) 350 ma 90~305 Vac 57~103Vdc 216 W 91.0% EUC-240H035DV(SV)(5) EUC240HxxxDV(SV) Features Ultra High Efficiency (Up to 91.0%) Six Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Lightning Protection AllAround Protection: SCP, OTP,

More information

Typical Efficiency (2) 22~36 Vdc 25 W 84% LUC-024S070DSW(SSW) (3) 15~24 Vdc 25 W 83% LUC-024S105DSW(SSW) (3)

Typical Efficiency (2) 22~36 Vdc 25 W 84% LUC-024S070DSW(SSW) (3) 15~24 Vdc 25 W 83% LUC-024S105DSW(SSW) (3) LUC024SxxxDSW(SSW) Features High Efficiency (Up to 85%) Active Power Factor Correction (Typical 0.95) Cascade Connection Adjustable Constant Output Current with Dip Switch 010V Dimmable AllAround Protection:

More information

DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies.

DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies. KEY FEATURES Universal input voltage range (90 264 V AC ) Input surge current limiting 400 W rated power (440 W peak up to 10 s) High efficiency up to 94% Low standby consumption (

More information

Note1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)

Note1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1) Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (

More information

Features. Regulated Converter RAC Watt Single Output. AC/DC Converter

Features. Regulated Converter RAC Watt Single Output. AC/DC Converter Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II

More information

CB Scheme UL508 UL ATEX II3G

CB Scheme UL508 UL ATEX II3G Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up

More information

Typical Efficiency (2)

Typical Efficiency (2) EUC030SxxxDVM Features Low THD, 10% Max up to 240 Vac Compact Metal Case with Excellent Thermal Performance Isolated 010V Dimmable Input Surge Protection: 4kV lineline, 6kV lineearth High Reliability &

More information

Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.

Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max. WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue

More information

Output Voltage Range. Max. Output Power

Output Voltage Range. Max. Output Power Features Ultra High Efficiency (Up to 93.0%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection:

More information

Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.

Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter. Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (

More information

Efficiency (1) 110Vac 220Vac. 350 ma 90 ~ 305 Vac 274 Vdc 96 W 92.0% EUC-096S035ST(7) EUC-096S035DT(7)

Efficiency (1) 110Vac 220Vac. 350 ma 90 ~ 305 Vac 274 Vdc 96 W 92.0% EUC-096S035ST(7) EUC-096S035DT(7) LED Driver EUC096SxxxST/DT 20101221 A Features Ultra High Efficiency (Up to 92%) High Power Factor (0.99 Typical) Constant Current Output Lightning Protection Dimming Function AllRound Protection: OVP,

More information

Typical Efficiency (2) Power Factor (2)

Typical Efficiency (2) Power Factor (2) LUC018SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllAround Protection: OVP, SCP and Open Lamp Protection

More information

75W Constant Current (700mA) LED Driver

75W Constant Current (700mA) LED Driver 75W Constant Current (700mA) LED Driver IZC070-075A-9267C-SA Product Overview The IZC070-075A-9267C-SA operates from a 90-305 Vac input range. This unit will provide up to 700mA of output current and a

More information

Power Factor (2) Efficiency (2) 25~ 49 Vdc 66 W 87 % 0.96 LUC-066T045DDM(SDM) 20~ 40 Vdc 66 W 86 % 0.96 LUC-066T056DDM(SDM)

Power Factor (2) Efficiency (2) 25~ 49 Vdc 66 W 87 % 0.96 LUC-066T045DDM(SDM) 20~ 40 Vdc 66 W 86 % 0.96 LUC-066T056DDM(SDM) LUC066TxxxDDM(SDM) Features 0 10V Dimmable (Compatible with Passive Dimmers) 5% Minimum Dimming Level Three Channels of Constant Current Output High Efficiency (Up to 87%) Active Power Factor Correction

More information

Power Factor (1) 350 ma 176 ~ 264 Vac Vdc 24 W 84% 0.95 LHC-024S035RSP. Efficiency (1)

Power Factor (1) 350 ma 176 ~ 264 Vac Vdc 24 W 84% 0.95 LHC-024S035RSP. Efficiency (1) LHC024SxxxRSP Features Leading Edge and Trailing Edge AC Dimmable Constant Current Output High Efficiency (Up to 84%) Active Power Factor Correction (Up to 0.95) AllRound Protection: OLP,SCP, and No Load

More information

Voltage Adjustment. Load Regulation

Voltage Adjustment. Load Regulation HIGH DENSITY, CONFIGURABLE AC-DC POWER SUPPLY RCB1200 SERIES DS RCB1200 RE02 NOEMBER 2010 Description The RCB1200 is a modular, user configurable power supply offering unrivalled performances and flexibility.

More information