Two Separated Thyristor Module, 100A ( Low Profile Package ) 14, 15 I T(AV) CHARACTERISTICS to to 150
|
|
- Elisabeth Hunt
- 5 years ago
- Views:
Transcription
1 NKTA Series Two Separated Thyristor Module, A ( Low Profile Package ) FEATURES High voltage RMS isolating voltage High surge capability Planar SCR chips Heat transfer and isolation through direct copper bonded aluminum oxide ceramic (AlO DBC) Simple mounting (One screw mounting) Compliant to Designed and qualified for multiple level APPLICATIONS Soft starters Brake chopper Light control Power converters Heat and temperature control Low profile package TA Circuit Configuration :, 6, 7 PRODUCT SUMMARY, 11 14, I T(A) A MAJOR RATINGS AND CHARACTERISTICS SYMBOL I T(A) C I TSM/IFSM I t I t DRM/RRM T J 5 Hz 6 Hz 5 Hz 6 Hz Range Range CHARACTERISTICS ALUES 1. to 16 4 to UNIT A ka s ka s ºC ELECTRICAL SPECIFICATIONS OLTAGE RATINGS TYPE NUMBER OLTAGE CODE RRM/ DRM, MAXIMUM REPETITIE PEAK REERSE OLTAGE RSM/ DSM, MAXIMUM NONREPETITIE PEAK REERSE OLTAGE l RRM /ldrm AT C NKTA Page 1 of 5
2 NKTA Series FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS ALUES UNIT Maximum RMS onstate current I T(A) 1 conduction, half sine wave, 5Hz, T C = C Maximum peak, onecycle, onstate nonreptitive surge current Maximum l t for fusing I TSM I t t = ms t =.ms t = ms t =.ms t = ms t =.ms No voltage reapplied % RRM reapplied Sine half wave, initial T J = T J maximum A ka s Maximum l t for fusing Maximum onstate voltage drop Maximum holding current Maximum latching current I t t =.1 to ms, no voltage reapplied ka s TM l H l L l TM = A, T J = 5 C, 1 conduction Anode supply = 6, resistive load, T = 5 C J BLOCKING PARAMETER SYMBOL TEST CONDITIONS ALUES Maximum peak reverse and offstate leakage current l RRM l DRM T = C J UNIT 5 (1 min) RMS isolation oltage ISO 5 Hz, circuit to base, all terminals shorted (1 s) Critical rate of rise of offstate voltage d/dt T J = TJ maximum, exponential to 67% rated DRM /μs TRIGGERING PARAMETER SYMBOL TEST CONDITIONS ALUES UNIT Maximum peak gate power P GM t p 5 ms, T J = T J maximum Maximum average gate power P G(A) f = 5 Hz, T J = T J maximum Maximum peak gate current I GM A t p 5 ms, T J = T J maximum Maximum peak negative gate voltage GT Maximum required DC gate voltage to trigger Maximum required DC gate current to trigger GT.7 to 1.5 Anode supply = 6, T J = 5 C resistive load; R a = 1Ω I GT to W Maximum gate voltage that will not trigger Maximum gate current that will not trigger GD T = T maximum, 66.7% = applied J J DRM.5 I GD Maximum rate of rise of turnedon current dl/dt T = 5 C, l = 1.5A, t.5 µs J GM r A/μs Page of 5
3 NKTA Series THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS ALUES UNIT Maximum junction operating temperature range Maximum storage temperature range T J T stg 4 to 4 to C Maximum thermal resistance, junction to case per junction Maximum thermal resistance, case to heatsink per module R thjc R thcs DC operation Mounting surface, smooth, flat and greased.45.1 C/W Mounting torque, ±% module to heatsink, M4 A mounting compound is recommended and the torque should be rechecked after a period of hours to allow for the spread of the compound. Lubricated threads.. N m Approximate weight Case style g.7 oz. Low Profile package ( NellTop ) Ordering Information Table Device code NK TA Nell s Low profile module (NellTop ) Current rating : I T(A) Circuit configuration type oltage code x = DRM/RRM Page of 5
4 NKTA Series Fig.1 Forward chracteristic of single thyristor Fig. Transient thermal Impedance vs. time (per thyristor).6 I T, (A) typ. max. T J = 5 C T J = C Transient thermal impedance ( C/W) () TM Time (s) Fig. Power dissipation s. RMS current Fig.4 Surge onstate current s. Cycles 6.4 Max. power dissipation (W) 5 4 Surge onstate current (KA) RMS Current (A) Time(cycles) Fig.5 Gate characteristics 1 Peak Forward Gate oltage () Peak Gate Power (w) Average Gate Power (w) Gate voltage () Peak Gate Current (A) C 5 C C Maximum Gate oltage that will not trigger any unit 1 1 Gate current () Page 4 of 5
5 NKTA Series ±. 5. 1± ±.5 5.5±.5 ±. Φ14.5±. Φ1±.5 Φ4.± ±.5 5±.5 ±.5 ± ±.5 Φ 4 1.6±.1 Φ TQ Circuit Configuration :.5, 6, 7 1±., 11 14, All dimensions in millimeters(inches) Page 5 of 5
Phase Control SCR, 70 A
Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for
More informationThyristor/Thyristor, 150 A (INT-A-PAK Power Module)
S-/4PbF Thyristor/Thyristor, 5 A (INT-A-PAK Power Module) INT-A-PAK PRIMARY CHARACTERISTICS I T(A) 5 A Type Modules - thyristor, standard Package INT-A-PAK FEATURES Electrically isolated by DBC ceramic
More informationThyristor/Thyristor (MAGN-A-PAK Power Modules), 320 A
Thyristor/Thyristor (MAGN-A-PAK Power Modules), 32 A MAGN-A-PAK PRIMARY CHARACTERISTICS I T(A) 32 A Type Modules - thyristor, standard Package MAGN-A-PAK FEATURES High voltage Electrically isolated base
More informationAAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 105 A
AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 05 A FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Designed and qualified for industrial level
More informationPhase Control Thyristors (Stud Version), 200 A
TO209AB (TO93) ST180SPbF Series FEATURES Center amplifying gate International standard case TO209AB (TO93) Hermetic metal case with ceramic insulator (Also available with glassmetal seal up to 1200 ) RoHS
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-50TPS2L-M3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, 50 A 2 3 TO-247AD 3L PRIMARY CHARACTERISTICS 2 (A) (K) (G) 3 I T(A) 50 A DRM / RRM 200 TM (typ.). I GT (typ.) 40 ma T J -40 C
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-TPS2LHM3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, A 2 (A) FEATURES AEC-Q qualified, meets JESD 20 class A whisker test Flexible solution for reliable AC power rectification 2 3
More informationVS-VSKT91.., VS-VSKH91.., VS-VSKL91.., VS-VSKN91.. Series
AAP Gen 7 (TO-4AA) Power Modules Thyristor/Diode and Thyristor/Thyristor, 95 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified for
More informationPhase Control SCR, 70 A
Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for
More informationST300S SERIES 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25158 rev. B 01/94. case style TO-209AE (TO-118)
ST300S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4-16UNF2A
More informationADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A
ADD-A-PAK Generation II Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/6 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified
More informationThyristor High Voltage, Phase Control SCR, 40 A
S-40TPS2LHM3, S-40TPS2ALHM3 Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) Low I GT parts available AEC-Q0 qualified meets JESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible
More information50RIA SERIES 50 A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2401 rev. A 07/00. Case Style TO-208AC (TO-65)
50RIA SERIES MEDIUM POWER THYRISTORS Stud Version Features High current rating Excellent dynamic characteristics dv/dt = 0V/µs option Superior surge capabilities Standard package Metric threads version
More informationVS-VSK.136..PbF, VS-VSK.142..PbF, VS-VSK.162..PbF Series
VSVSK.36..PbF, VSVSK.42..PbF, VSVSK.62..PbF Series Thyristor/Diode and Thyristor/Thyristor, 35 A to 6 A (New INTAPAK Power Modules) PRODUCT SUMMARY I T(AV) 35 A to 6 A Type Modules Thyristor, Standard
More informationADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A
FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Compliant to RoHS directive /95/EC Designed and qualified for industrial level PRODUCT SUMMARY I T(A) or
More informationPhase Control Thyristor RMS SCRs, 25 A, 35 A
VS-N681, VS-N Series Phase Control Thyristor RMS SCRs, A, 3 A TO-8 (TO-8AA) V DRM /V RRM PRIMARY CHARACTERISTICS I T(AV) 16 A, A I T(RMS) A, 3 A 3 V, V, V, 6 V, 7 V, 8 V, V, V, 1 V, 1 V, V, V, 1 V 1 V
More informationThyristor High Voltage, Phase Control SCR, 40 A
Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) AEC-Q0 qualified meets ESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible solution for reliable AC power rectification Easy control
More informationSCR/SCR and SCR/Diode (MAGN-A-PAK TM Power Modules), 230 A
SCR/SCR and SCR/Diode (MAGNAPAK TM Power Modules), 230 A VSK.230..PbF Series FEATURES High voltage Electrically isolated base plate 3500 V RMS isolating voltage Industrial standard package Simplified mechanical
More informationBTA16-600BW3G, BTA16-800BW3G,
BTA6-600BW3G, BTA6-800BW3G, Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
More informationST180S SERIES 200A. Stud Version PHASE CONTROL THYRISTORS. Features. Typical Applications. Major Ratings and Characteristics
ST180S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator (Also available with glass-metal seal up to 1200V) International standard
More informationMT..KB SERIES 50 A 90 A 100 A. Power Modules THREE PHASE AC SWITCH. Features. Description. Major Ratings and Characteristics. Bulletin I /97
MT..KB SERIES THREE PHASE AC SWITCH Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated case
More informationIRKU/V41, 56 SERIES 45 A 60 A. ADD-A-pak TM GEN V Power Modules THYRISTOR/ THYRISTOR. Features. Benefits. Mechanical Description
Bulletin I2734 rev. E /2 IRKU/V4, 56 SERIES THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper
More informationSERIES IRK.136,.142,.162
Bulletin I277 rev. C 3/2 THYRISTOR/DIODE and THYRISTOR/THYRISTOR SERIES IRK.36,.42,.62 NEW INT-A-pak Power Modules Features High Voltage Electrically Isolated by DBC Ceramic ( Al 2 O 3 ) 35 V RMS Isolating
More informationThree Phase AC Switch (Power Modules), 50 A to 100 A
54-94-4MT..KPbF Series Three Phase AC Switch (Power Modules), 5 A to A MTK PRODUCT SUMMARY I O RRM Package Circuit 5 A to A 8 to 6 MT-K Three phase AC switch FEATURES Package fully compatible with the
More informationPower Phase Modules Control - Thyristor/Thyristor. 50 Hz 4570 A. 60 Hz 4980 A
FEATURES High surge capability Qualified for industrial level Thick copper baseplate Easy mounting on heatsink TYPICAL APPLICATIONS Power supplies Machine tools control High power drives Welders Medium
More informationSCR/SCR and SCR/Diode (MAGN-A-PAK Power Modules), 170 A, 250 A
SCR/SCR and SCR/Diode (MAGNAPAK Power Modules), 17 A, 25 A MAGNAPAK PRIMARY CHARACTERISTICS I T(AV) 17 A, 25 A Type Modules thyristor, standard Package MAGNAPAK FEATURES High voltage Electrically isolated
More informationIRK.105 SERIES 105 A. THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR. ADD-A-pak TM GEN V Power Modules. Features. Benefits. Mechanical Description
IRK.15 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate
More informationPhase Control Thyristors (Stud Version), 300 A
Phase Control Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A 400 V, 800 V, 1200 V, 1600 V, V DRM /V RRM 1800 V, 2000 V V TM 1.28 V I GT 200 ma T J -40 C to +125
More informationPhase Control Thyristors (Stud Version), 110 A
VS-RKI...PbF, VS-RKI...PbF Series Phase Control Thyristors (Stud Version), A TO-94 (TO-29AC) PRIMARY CHARACTERISTICS I T(AV) A V DRM /V RRM 4 V, 8 V, 2 V V TM.57 V I GT 8 ma T J -4 C to +4 C Package TO-94
More informationBTA30H-600CW3G, BTA30H-800CW3G
BTA30H-600CW3G, BTA30H-800CW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage
More information1800PT Series. Phase Control Thyristors (Hockey PUK Version), 1800A FEATURES TYPICAL APPLICATIONS. RoHS. Nell High Power Products.
Phase Control Thyristors (Hockey PUK ersion), 18 18PT Series FETURES Center amplifying gate Metal case with ceramic insulator lnternational standard case -24 (K-PUK) Nell s D-type Capsule Compliant to
More informationBTA25-600CW3G, BTA25-800CW3G
BTA25-600CW3G, BTA25-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage
More informationBTB16-600BW3G, BTB16-700BW3G, BTB16-600BW3G
BTB16-600BW3G, BTB16-700BW3G, BTB16-600BW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking
More informationSCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A
VSVSK.23..PbF Series SCR / SCR and SCR / Diode (MAGNAPAK Power Modules), 23 A PRODUCT SUMMARY I T(AV) 23 A Type Modules thyristor, standard Package MAGNAPAK Circuit configuration MAGNAPAK Two SCRs doubler
More informationThyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A
VS- Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A FEATURES High current capability High surge capability Industrial standard package 3000 V RMS isolating voltage with non-toxic substrate Designed
More informationPhase Control Thyristors (Stud Version), 330 A
Phase Control Thyristors (Stud Version), 330 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 330 A 400 V, 800 V, 1200 V, 1400 V, V DRM /V RRM 1600 V, 2000 V V TM 1.52 V I GT 200 ma T J -40 C to +125
More informationInverter Grade Thyristors (Stud Version), 85 A
Inverter Grade Thyristors (Stud Version), 85 A TO-94 (TO-209AC) PRIMARY CHARACTERISTICS Package TO-94 (TO-209AC) Circuit configuration Single SCR I T(AV) 85 A V DRM /V RRM 400 V, 0 V, 0 V, 0 V V TM 2.15
More informationPower Modules, Passivated Assembled Circuit Elements, 40 A
Power Modules, Passivated Assembled Circuit Elements, 4 A FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS I O 4 A Type
More informationFeatures / Advantages: Applications: Package: TO-240AA
hyristor Module RRM = 2x 2 A = 6A =.2 Phase leg Part number MCD56-2ioB Backside: isolated 3 2 5 Features / Advantages: Applications: Package: O-2AA hyristor for line frequency Planar passivated chip Long-term
More informationPower Modules, Passivated Assembled Circuit Elements, 25 A
Power Modules, Passivated Assembled Circuit Elements, 25 A VS-P Series FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS
More informationBTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description
BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State
More informationTFI V DRM V DSM V RRM V RSM
FAST SWITCHING THYRISTOR V DRM /V RRM = 2200 2400 V I T(AV) = 2500 A (T C = 80 C) I T(AV) = 3400 A (T C = 55 C) I TSM = 40 ka (T Vj = 125 C) Interdigitated amplifying gate Low on-state switching losses
More informationBTB08-600BW3G, BTB08-800BW3G
BTB08-600BW3G, BTB08-800BW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
More informationTK18. Phase Control Thyristor Advance Information Replaces January 2000 version, DS DS July 2001 TK18
Phase Control Thyristor Advance Information Replaces January 2000 version, DS45253-4.0 DS4253-5.0 July 2001 FEATURES High Surge Capability APPLICATIONS High Power Drives High Voltage Power Supplies DC
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series Thyristor High Voltage, Phase Control SCR, 70 A
Thyristor High Voltage, Phase Control SCR, 70 A 2 (A) FEATURES High surge capability High voltage input rectification 2 Designed and qualified according to JEDEC -JESD47 3 Super TO-247 (K) (G) 3 Material
More informationPhase Control Thyristors (Stud Version), 110 A
Phase Control Thyristors (Stud Version), 110 A TO-209AC (TO-94) PRODUCT SUMMARY I T(AV) 110 A V DRM /V RRM 400 V, 1600 V V TM 1.52 V I GT 150 ma T J -40 C to 140 C Package TO-209AC (TO-94) Diode variation
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationT62E-250 Phase Control Thyristor
T62E-25 Thyristors type T62E are of modern design with internal spring loaded contacts and pressure welded glass-to-metal seal. Designed for use in power electronic circuits and equipment under normal
More informationMedium Power Phase Control Thyristors (Stud Version), 16 A
Medium Power Phase Control Thyristors (Stud Version), 16 A VS- PRODUCT SUMMARY TO-208AA (TO-48) Package TO-208AA (TO-48) Diode variation Single SCR I T(AV) 16 A 0 V, 200 V, 400 V, 600 V, 800 V, V DRM /V
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationInverter Grade Thyristors (Stud Version), 300 A
Inverter Grade Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A V DRM /V RRM V, 800 V, 1 V V TM 2.16 V I TSM at 3000 A I TSM at 60 Hz 3150 A I GT ma T J -40 C to
More informationPOW-R-BLOK TM Dual SCR Isolated Module 250 Amperes / Up to 1600 Volts. ND43 25 Dual SCR Isolated POW-R-BLOK TM Module 250 Amperes / Up to 1600 Volts
25 mperes / Up to 16 olts G J 1 G1 G2 2 OUTLINE DRWING T - M8 THD. (3 TYP.) M U - DI. (4 TYP.) N C B S Q W Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control
More informationPhase Control Thyristors (Hockey PUK Version), 1745 A
Phase Control Thyristors (Hockey PUK Version), 1745 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Designed and
More informationIR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK V T I TSM V RRM. 800 to 1600V < 16A = 300A. Bulletin I2135 rev.
IR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK Description/Features The 25TTS..FP IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control
More informationBTA16-600CW3G, BTA16-800CW3G. Triacs Silicon Bidirectional Thyristors. TRIACS 16 AMPERES RMS 600 thru 800 VOLTS
BTA6-600CW3G, BTA6-800CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance fullwave ac control applications where high noise immunity and high commutating di/dt are required. Features
More informationT Phase Control Thyristor
T95-19 Thyristors type T95 are of modern design with pressure contacts, high alumina ceramic insulator and cold-welding encapsulation. Designed for use in power electronic circuits and equipment under
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series High Voltage Phase Control Thyristor, 70 A
High Voltage Phase Control Thyristor, 70 A Super TO-247 PRODUCT SUMMARY 2 (A) 1 (K) (G) 3 Package Super TO-247 Diode variation Single SCR I T(AV) 70 A V DRM /V RRM 1200 V, 1600 V V TM 1.4 V I GT 100 ma
More informationIRK.91 SERIES 100 A. ADD-A-pak TM GEN V Power Modules STANDARD DIODES. Features. Benefits. Mechanical Description. Electrical Description
IRK.91 SERIES STANDARD DIODES ADDApak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 35V
More informationPhase Control Thyristors (Hockey-PUK Version), 2310 A
Phase Control Thyristors (Hockey-PUK Version), 2310 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Material categorization:
More informationMCR69-2, MCR69-3. Thyristors. Surface Mount V > MCR69-2, MCR69-3. Description. Designed for overvoltage protection in crowbar circuits.
1 2 3 Thyristors MCR69-2, MCR69-3 Pb Description Designed for overvoltage protection in crowbar circuits. Features Glass-Passivated Junctions for Greater Parameter Stability and Reliability Center-Gate
More informationThyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAK TM Power Modules), 500 A
Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor FEATURES High current capability High surge capability Industrial standard package 3 V RMS isolating voltage with non-toxic substrate
More informationMCR8DCM, MCR8DCN. Thyristors. Surface Mount 600V - 800V > MCR8DCM, MCR8DCN G K. Description
MCR8DCM, MCR8DCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size
More informationPOW-R-BLOK TM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts CD62 15B, CD67 15B
5 mperes / Up to Volts B G "J" () OUTLINE DRWING D E F F 6 7 4 5 M "K" () R S Description: Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging.
More informationLDR3 Outline Dimensions. Dimension Inches Millimeters
OUTLINE DRAWING Dual SCR Module 5 Amperes / 16-18 Volts Ordering Information: Select the complete eight-digit module part number from the table below. Example: LDR3165 is a 16V, 5 Ampere Dual SCR Isolated
More informationMAC8DG, MAC8MG, MAC8NG
MAC8DG, MAC8MG, MAC8NG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
More informationSD233N/R SERIES 235A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2094 rev. B 10/06. case style B-8.
SD33N/R SERIES FAST RECOVERY DIODES Stud Version Features High power FAST recovery diode series.5 µs recovery time High voltage ratings up to 5V High current capability Optimized turn on and turn off characteristics
More informationCR02AM-8. Thyristor. Low Power Use. Features. Outline. Applications. Maximum Ratings. REJ03G Rev.1.00 Mar
Thyristor Low Power Use REJG4- Rev.. Mar.8. Features I T (AV) :. A V DRM : 4 V I GT : µa Planar Passivation Type Completed Pb free product Outline RENESAS Package code: PRSSDE-A (Package name: TO-9()).
More informationMCR218-2G, MCR218-4G, MCR218-6G
MCR218-2G, MCR218-4G, MCR218-6G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled,
More informationValue Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)
MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge
More informationFeatures / Advantages: Applications: Package: TO-240AA
MCM4P6 hyristor Module RRM 2x 6 4.28 Phase leg Part number MCM4P6 Backside: isolated 3 2 6 7 5 4 Features / dvantages: pplications: Package: O-24 hyristor for line frequency Planar passivated chip Long-term
More informationST280C..C SERIES 500A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25159 rev. C 02/00. case style TO-200AB (A-PUK)
Bulletin I25159 rev. C 02/00 ST280C..C SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-200AB (A-PUK)
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6 V I T(RMS) = 5 A I TSM = 6 A I GT = 35mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 5A) Gate Trigger Current : 35mA High commutation
More informationFeatures / Advantages: Applications: Package: TO-240AA
MCMP6 hyristor Module RRM 2x 6.2 Phase leg Part number MCMP6 Backside: isolated 3 2 6 7 5 4 Features / dvantages: pplications: Package: O-24 hyristor for line frequency Planar passivated chip Long-term
More informationMC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description
MCDCM, MACDCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size Surface
More informationMCR106-6, MCR Thyristors. Surface Mount 400V - 600V > MCR106-6, MCR106-8 TO 225AA CASE 77 STYLE 2 G K. Description
MCR106-6, MCR106-8 Pb Description PNPN devices designed for high volume consumer applications such as temperature, light and speed control; process and remote control, and warning systems where reliability
More informationPhase Control Thyristors (Hockey PUK Version), 1350 A
Phase Control Thyristors (Hockey PUK Version), 1350 A FEATURES Center amplifying gate Metal case with ceramic insulator International standard case B-PUK (TO-200AC) Designed and qualified for industrial
More informationThree Phase Bridge (Power Modules), 90/110 A
9-MT.KPbF Series MTK Three Phase Bridge (Power Modules), 9/ A FEATURES Package fully compatible with the industry standard INT-A-PAK power modules series High thermal conductivity package, electrically
More informationSurface Mountable Phase Control SCR, 16 A
D 2 PAK PRODUCT SUMMARY V T at 16 A I TSM V RRM Anode 2 1 3 Cathode Gate < 1.25 V 300 A 800 V to 1600 V FEATURES Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Compliant to RoHS directive 2002/95/EC
More informationMAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description
MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching
More informationMAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
More informationAbsolute Maximum Ratings. Chip I T(AV) T c =85 C 119 A T c =100 C 91 A I TRMS continuous operation 190 A I TSM. T j =25 C 2250 A T j =130 C 1900 A
Absolute Maximum Ratings SEMIPACK 1 Thyristor Modules SKKT 107/16 E Features Heat transfer through aluminium oxide ceramic isolated metal baseplate UL recognized, file no. E63532 Typical Applications*
More informationT Phase Control Thyristor
T64-15 Thyristors type T64 are of modern design with internal spring loaded contacts, high alumina ceramic insulator and preassure welding encapsulation. Designed for use in power electronic circuits and
More informationThree Phase Bridge, 160 A (Power Modules)
MTC Three Phase Bridge, 160 A (Power Modules) S-160MT...C Series ishay Semiconductors FEATURES Blocking voltage up to 1 High surge capability High thermal conductivity package, electrically insulated case
More informationT Phase Control Thyristor
KKT51, March 27 version T51- Thyristors type T51 are of modern design with internal spring loaded contacts, high alumina ceramic insulator and pressure welding encapsulation. Designed for use in power
More informationSymbol Parameter Conditions Ratings Unit. 600 V Sine wave, 50/60Hz, Gate open V RRM Repetitive Peak Reverse Voltage 600 V I T(AV)
3 Quadrants Standard TRIAC V DRM = 6V I T(RMS) = 4 A I TSM = 4 A I GT = 5mA FEATURES Repetitive Peak Off-State Voltage : 6V R.M.S On State Current (I T(RMS) = 4A) Gate Trigger Current : 5mA High commutation
More informationThyristor \ Diode Module
hyristor \ Diode Module = 2x 8 M I = 6 A A =.2 Phase leg Part number Backside: isolated 3 5 2 Features / Advantages: Applications: Package: O-2AA hyristor for line frequency Planar passivated chip Long-term
More informationC122F1G. Thyristors. Surface Mount 50V > C122F1G. Description
Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled, solid state devices
More informationPOW-R-BLOK TM Dual SCR Isolated Module 500 Amperes / Up to 1600 Volts. LD43 50 Dual SCR POW-R-BLOK TM Module 500 Amperes / Volts
mperes / Up to 16 Volts R OUTLINE DRWING B C J F 1 3 L H Q - DI. (4 TYP.) P - M1 THD (3 TYP.) T - (4 TYP.) S 4 7 5 6 E K M G D LD43 5 Dual SCR Module mperes / 8-16 Volts LD43 Outline Dimensions Dimension
More informationPower Rectifier Diodes (T-Modules), 2200 V, 20 A
Power Rectifier Diodes (T-Modules), 2200 V, 20 A FEATURES Electrically isolated base plate 2200 V RRM Industrial standard packaging UL approved file E78996 Simplified mechanical designs, rapid assembly
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A
More informationMAXIMUM ALLOWABLE RATINGS
PROTON-ELECTROTEX RUSSIA Phase Control Thyristor High power cycling capability Low on-state and switching losses Designed for traction and industrial applications Mean on-state current ITA Repetitive peak
More information70HF(R) SERIES 70 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
70HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available 70 A Types
More informationMCR8SDG, MCR8SMG, MCR8SNG
MCR8SDG, MCR8SMG, MCR8SNG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon gate controlled
More informationMT..KB SERIES 130 A 160 A THREE PHASE BRIDGE. Power Modules. Features. Description. Major Ratings and Characteristics. Bulletin I /97
MT..KB SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated case
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-2ETS..FPPbF Series, VS-2ETS..FP-M3 Series High Voltage, Input Rectifier Diode, 2 A FEATURES Very low forward voltage drop 2 TO-22 FULL-PAK 3 Cathode 2 3 Anode C max. operating junction temperature Designed
More information85HF(R) SERIES 85 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
85HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Stud cathode and stud anode version Leaded version available 85 A Types up to 1600V V RRM Typical Applications
More informationThree Phase Bridge, 300 A (Power Modules)
MTC Three Phase Bridge, 300 A (Power Modules) S-300MT...C Series FEATURES Blocking voltage up to 1800 High surge capability High thermal conductivity package, electrically insulated case Excellent power
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More informationT Phase Control Thyristor
T83-9 Thyristors type T83 are of modern design with pressure contacts, high alumina ceramic insulator and cold-welding encapsulation. Designed for use in power electronic circuits and equipment under normal
More informationMCR12DCM, MCR12DCN. Thyristors. Surface Mount 400V - 800V > MCR12DCM, MCR12DCN G K. Description
MCR12DCM, MCR12DCN Pb Description This thyristor is designed primarily for half-wave ac control applications, such as motor controls, heating controls, and power supplies; or wherever half wave, silicon
More information