Thyristor/Thyristor (MAGN-A-PAK Power Modules), 320 A
|
|
- Norah Fisher
- 5 years ago
- Views:
Transcription
1 Thyristor/Thyristor (MAGN-A-PAK Power Modules), 32 A MAGN-A-PAK PRIMARY CHARACTERISTICS I T(A) 32 A Type Modules - thyristor, standard Package MAGN-A-PAK FEATURES High voltage Electrically isolated base plate 36 RMS isolating voltage Industrial standard package Simplified mechanical designs, rapid assembly High surge capability Large creepage distances UL approved file E78996 Designed and qualified for industrial level Material categorization: for definitions of compliance please see /doc?9992 DESCRIPTION This SK series of MAGN-A-PAK modules uses high voltage power thyristor/thyristor in doubler circuit configuration. The semiconductors are electrically isolated from the metal base, allowing common heatsinks and compact assemblies to be built. They can be interconnected to form single phase or three phase bridges or as AC-switches when modules are connected in anti-parallel mode. These modules are intended for general purpose applications such as battery chargers, welders, motor drives, UPS, etc. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS ALUES UNITS I T(A) 7 C 32 I T(RMS) 7 I TSM 6 Hz 942 Hz 9 Hz 45 I 2 t 6 Hz 37 ka 2 s I 2 t 4 ka 2 s DRM / RRM 2 to 6 T J Range -4 to +3 C A ELECTRICAL SPECIFICATIONS OLTAGE RATINGS TYPE NUMBER S-SKT32- OLTAGE CODE RRM / DRM, MAXIMUM REPETITIE PEAK REERSE AND OFF-STATE BLOCKING OLTAGE RSM, MAXIMUM NON-REPETITIE PEAK REERSE OLTAGE I RRM /I DRM AT 3 C MAXIMUM ma Revision: 26-Jul-28 Document Number: 9485 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
2 ON-STATE CONDUCTION PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum average on-state current 32 A I at case temperature T(A) 8 conduction, half sine wave 7 C Maximum RMS on-state current I T(RMS) As AC switch 7 t = ms No voltage 9 Maximum peak, one-cycle on-state 942 A I non-repetitive, surge current TSM t = ms % RRM 757 Sinusoidal half wave, 792 t = ms initial T J = No voltage 45 T J maximum 37 Maximum I 2 t for fusing I 2 t ka 2 s t = ms % RRM Maximum I 2 t for fusing I 2 t t =. ms to ms, no voltage reapplied 4 ka 2 s (6.7 % x x I Low level value or threshold voltage T(A) < I < x I T(A) ), T(TO).8 T J = T J maximum High level value of threshold voltage T(TO)2 (I > x I T(A) ), T J = T J maximum.3 Low level value on-state slope resistance High level value on-state slope resistance Maximum peak on-state or forward voltage drop r t (6.7 % x x I T(A) < I < x I T(A) ), T J = T J maximum.75 r t2 (I > x I T(A) ), T J = T J maximum.53 TM, FM, I TM = 7 A, T J = 25 C, 8 conduction, average power = T(TO) x I T(A) + r t x (I T(RMS) ) 2.4 I TM = 7 A, T J = T J maximum, 8 conduction, average power = T(TO) x I T(A) + r f x (I T(RMS) ) 2.37 Maximum holding current I H Anode supply = 2, initial I T = 3 A, T J = 25 C Maximum latching current I L Anode supply = 2, resistive load =, gate pulse:, μs, T J = 25 C m ma SWITCHING PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Typical delay time t d TJ = 25 C, gate current = A di g /dt = A/μs. Typical rise time t r d =.67 % DRM 2. μs Typical turn-off time range t q I TM = 3 A; di/dt = 5 A/μs; T J = T J maximum; R = ; d/dt = 2 /μs; gate, 2 to 3 BLOCKING PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum peak reverse and off-state leakage current I RRM, I DRM T J = T J maximum ma RMS insulation voltage INS Hz, circuit to base, all terminals shorted, 25 C, s 36 Critical rate of rise of off-state voltage d/dt T J = T J maximum, exponential to 67 % rated DRM /μs Revision: 26-Jul-28 2 Document Number: 9485 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
3 TRIGGERING PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum peak gate power P GM t p 5 ms, T J = T J maximum. Maximum average gate power P G(A) f = Hz, T J = T J maximum 2. W Maximum peak gate current + I GM t p 5 ms, T J = T J maximum 3. A Maximum peak negative gate voltage - GT t p 5 ms, T J = T J maximum 5. Maximum required DC gate voltage to trigger GT T J = 25 C Anode supply = 2, resistive load; Ra = 3. T J = - 4 C 4. T J = T J maximum 2. Maximum required DC gate current to trigger I GT T J = 25 C Anode supply = 2, resistive load; Ra = 2 ma T J = - 4 C 3 T J = T J maximum Maximum gate voltage that will not trigger GD T J = T J maximum, rated DRM applied.25 Maximum gate current that will not trigger I GD T J = T J maximum, rated DRM applied. ma Maximum rate of rise of turned-on current di/dt T J = T J maximum, I TM = 4 A, rated DRM applied A/μs THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Junction operating and storage temperature range T J, T Stg -4 to +3 C Maximum thermal resistance, junction to case per junction R thjc DC operation.25 Typical thermal resistance, case to heatsink per module R thcs Mounting surface flat, smooth and greased.2 K/W Mounting torque ± % Approximate weight Case style MAGN-A-PAK to heatsink busbar to MAGN-A-PAK A mounting compound is recommended and the torque should be rechecked after a period of about 3 hours to allow for the spread of the compound. 4 to 6 Nm g 7.8 oz. MAGN-A-PAK R CONDUCTION PER JUNCTION SINUSOIDAL CONDUCTION AT T J MAXIMUM RECTANGULAR CONDUCTION AT T J MAXIMUM DEICES UNITS SKT K/W Note Table shows the increment of thermal resistance R thjc when devices operate at different conduction angles than DC Revision: 26-Jul-28 3 Document Number: 9485 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
4 Maximum Allowable Case Temperature ( C) R thjc(dc) =.25 K/W Maximum Average On-State Power Loss (W) DC RMS limit Per Junction T J = 3 C _ 9485_4 Fig. - Current Ratings Characteristics Fig. 4 - On-State Power Loss Characteristics Maximum Allowable Case Temperature ( C) R thjc(dc) =.25 K/W 8 DC Peak Half Sine Wave On-State Current (A) Per junction At any rated load condition and with rated RRM applied following surge. Initial T J = 3 C 6 Hz.83 s Hz. s 9485_2 9485_5 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 2 - Current Ratings Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average On-State Power Loss (W) RMS limit Per Junction T J = 3 C Peak Half Sine Wave On-State Current (A) Per junction Maximum non-repetitive surge current versus pulse train duration. Control of conduction may not be maintained. Initial T J = 3 C No voltage reapplied Rated RRM reapplied _3 9485_6 Pulse Train Duration (s) Fig. 3 - On-State Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current Revision: 26-Jul-28 4 Document Number: 9485 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
5 Instantaneous On-State Current (A) T J = 3 C T J = 25 C Per junction _7 Instantaneous On-State oltage () Fig. 7 - On-State oltage Drop Characteristics Z thjc - Transient Thermal Impedance ( C/W).. Steady state value R thjc =.25 K/W (DC operation) _8 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance Z thjc Characteristics ORDERING INFORMATION TABLE Device code S-S KT 32-6 PbF product - Circuit configuration (see dimensions - link at the end of datasheet) - Current rating - oltage code x = RRM (see oltage Ratings table) - None = standard production PbF = lead (Pb)-free Note To order the optional hardware go to /doc?9572 Revision: 26-Jul-28 5 Document Number: 9485 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
6 CIRCUIT CONFIGURATION CIRCUIT DESCRIPTION CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING ~ ~ Two SCRs doubler circuit KT K G G2 K2 Dimensions LINKS TO RELATED DOCUMENTS /doc?986 Revision: 26-Jul-28 6 Document Number: 9485 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
7 Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. 27 ISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERED Revision: 8-Feb-7 Document Number: 9
Thyristor/Thyristor, 150 A (INT-A-PAK Power Module)
S-/4PbF Thyristor/Thyristor, 5 A (INT-A-PAK Power Module) INT-A-PAK PRIMARY CHARACTERISTICS I T(A) 5 A Type Modules - thyristor, standard Package INT-A-PAK FEATURES Electrically isolated by DBC ceramic
More informationAAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 105 A
AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 05 A FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Designed and qualified for industrial level
More informationVS-VSKT91.., VS-VSKH91.., VS-VSKL91.., VS-VSKN91.. Series
AAP Gen 7 (TO-4AA) Power Modules Thyristor/Diode and Thyristor/Thyristor, 95 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified for
More informationADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A
ADD-A-PAK Generation II Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/6 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-TPS2LHM3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, A 2 (A) FEATURES AEC-Q qualified, meets JESD 20 class A whisker test Flexible solution for reliable AC power rectification 2 3
More informationThyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A
VS- Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A FEATURES High current capability High surge capability Industrial standard package 3000 V RMS isolating voltage with non-toxic substrate Designed
More informationThyristor High Voltage, Phase Control SCR, 40 A
S-40TPS2LHM3, S-40TPS2ALHM3 Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) Low I GT parts available AEC-Q0 qualified meets JESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible
More informationPower Modules, Passivated Assembled Circuit Elements, 40 A
Power Modules, Passivated Assembled Circuit Elements, 4 A FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS I O 4 A Type
More informationPower Modules, Passivated Assembled Circuit Elements, 25 A
Power Modules, Passivated Assembled Circuit Elements, 25 A VS-P Series FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-50TPS2L-M3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, 50 A 2 3 TO-247AD 3L PRIMARY CHARACTERISTICS 2 (A) (K) (G) 3 I T(A) 50 A DRM / RRM 200 TM (typ.). I GT (typ.) 40 ma T J -40 C
More informationThyristor High Voltage, Phase Control SCR, 40 A
Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) AEC-Q0 qualified meets ESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible solution for reliable AC power rectification Easy control
More informationSCR/SCR and SCR/Diode (MAGN-A-PAK Power Modules), 170 A, 250 A
SCR/SCR and SCR/Diode (MAGNAPAK Power Modules), 17 A, 25 A MAGNAPAK PRIMARY CHARACTERISTICS I T(AV) 17 A, 25 A Type Modules thyristor, standard Package MAGNAPAK FEATURES High voltage Electrically isolated
More informationADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A
FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Compliant to RoHS directive /95/EC Designed and qualified for industrial level PRODUCT SUMMARY I T(A) or
More informationThree Phase AC Switch (Power Modules), 50 A to 100 A
54-94-4MT..KPbF Series Three Phase AC Switch (Power Modules), 5 A to A MTK PRODUCT SUMMARY I O RRM Package Circuit 5 A to A 8 to 6 MT-K Three phase AC switch FEATURES Package fully compatible with the
More informationPower Rectifier Diodes (T-Modules), 2200 V, 20 A
Power Rectifier Diodes (T-Modules), 2200 V, 20 A FEATURES Electrically isolated base plate 2200 V RRM Industrial standard packaging UL approved file E78996 Simplified mechanical designs, rapid assembly
More informationThree Phase Bridge, 160 A (Power Modules)
MTC Three Phase Bridge, 160 A (Power Modules) S-160MT...C Series ishay Semiconductors FEATURES Blocking voltage up to 1 High surge capability High thermal conductivity package, electrically insulated case
More informationPhase Control Thyristors (Stud Version), 110 A
VS-RKI...PbF, VS-RKI...PbF Series Phase Control Thyristors (Stud Version), A TO-94 (TO-29AC) PRIMARY CHARACTERISTICS I T(AV) A V DRM /V RRM 4 V, 8 V, 2 V V TM.57 V I GT 8 ma T J -4 C to +4 C Package TO-94
More informationPhase Control Thyristors (Stud Version), 330 A
Phase Control Thyristors (Stud Version), 330 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 330 A 400 V, 800 V, 1200 V, 1400 V, V DRM /V RRM 1600 V, 2000 V V TM 1.52 V I GT 200 ma T J -40 C to +125
More informationSCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A
VSVSK.23..PbF Series SCR / SCR and SCR / Diode (MAGNAPAK Power Modules), 23 A PRODUCT SUMMARY I T(AV) 23 A Type Modules thyristor, standard Package MAGNAPAK Circuit configuration MAGNAPAK Two SCRs doubler
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series Thyristor High Voltage, Phase Control SCR, 70 A
Thyristor High Voltage, Phase Control SCR, 70 A 2 (A) FEATURES High surge capability High voltage input rectification 2 Designed and qualified according to JEDEC -JESD47 3 Super TO-247 (K) (G) 3 Material
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) A Type Modules - Diode, High Voltage Package ADD-A-PAK Gen 7 Circuit ADD-A-PAK Two
More informationPhase Control Thyristors (Hockey PUK Version), 1745 A
Phase Control Thyristors (Hockey PUK Version), 1745 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Designed and
More informationPhase Control SCR, 70 A
Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for
More informationThree Phase Bridge, 300 A (Power Modules)
MTC Three Phase Bridge, 300 A (Power Modules) S-300MT...C Series FEATURES Blocking voltage up to 1800 High surge capability High thermal conductivity package, electrically insulated case Excellent power
More informationPhase Control Thyristor RMS SCRs, 25 A, 35 A
VS-N681, VS-N Series Phase Control Thyristor RMS SCRs, A, 3 A TO-8 (TO-8AA) V DRM /V RRM PRIMARY CHARACTERISTICS I T(AV) 16 A, A I T(RMS) A, 3 A 3 V, V, V, 6 V, 7 V, 8 V, V, V, 1 V, 1 V, V, V, 1 V 1 V
More informationSCR/SCR and SCR/Diode (MAGN-A-PAK TM Power Modules), 230 A
SCR/SCR and SCR/Diode (MAGNAPAK TM Power Modules), 230 A VSK.230..PbF Series FEATURES High voltage Electrically isolated base plate 3500 V RMS isolating voltage Industrial standard package Simplified mechanical
More informationStandard Diodes (Super MAGN-A-PAK Power Modules), 600 A
Standard Diodes (Super MAGN-A-PAK Power Modules), 6 A FEATURES High current capability High surge capability High voltage ratings up to 2 V 3 V RMS isolating voltage with non-toxic substrate Industrial
More informationPhase Control Thyristors (Stud Version), 300 A
Phase Control Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A 400 V, 800 V, 1200 V, 1600 V, V DRM /V RRM 1800 V, 2000 V V TM 1.28 V I GT 200 ma T J -40 C to +125
More informationVS-T40HF..., VS-T70HF..., VS-T85HF..., VS-T110HF... Series Power Rectifiers Diodes (T-Modules), 40 A to 110 A
Power Rectifiers Diodes (T-Modules), A to A FEATURES Electrically isolated base plate D-55 (T-module) Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly High surge
More informationVS-VSK.136..PbF, VS-VSK.142..PbF, VS-VSK.162..PbF Series
VSVSK.36..PbF, VSVSK.42..PbF, VSVSK.62..PbF Series Thyristor/Diode and Thyristor/Thyristor, 35 A to 6 A (New INTAPAK Power Modules) PRODUCT SUMMARY I T(AV) 35 A to 6 A Type Modules Thyristor, Standard
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationPhase Control Thyristors (Hockey-PUK Version), 2310 A
Phase Control Thyristors (Hockey-PUK Version), 2310 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Material categorization:
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A
More informationStandard Recovery Diodes, 400 A
VS-VSMD4AW6, VS-VSMD4CW6 Standard Recovery Diodes, 4 A PRIMARY CHARACTERISTICS I F(AV) per module 4 A Type Modules - diode, high voltage Package TO-244 Circuit configuration TO-244 Two diodes common anode,
More informationPhase Control Thyristors (Hockey PUK Version), 1350 A
Phase Control Thyristors (Hockey PUK Version), 1350 A FEATURES Center amplifying gate Metal case with ceramic insulator International standard case B-PUK (TO-200AC) Designed and qualified for industrial
More informationMedium Power Phase Control Thyristors (Stud Version), 16 A
Medium Power Phase Control Thyristors (Stud Version), 16 A VS- PRODUCT SUMMARY TO-208AA (TO-48) Package TO-208AA (TO-48) Diode variation Single SCR I T(AV) 16 A 0 V, 200 V, 400 V, 600 V, 800 V, V DRM /V
More informationThyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAK TM Power Modules), 500 A
Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor FEATURES High current capability High surge capability Industrial standard package 3 V RMS isolating voltage with non-toxic substrate
More informationInverter Grade Thyristors (Stud Version), 85 A
Inverter Grade Thyristors (Stud Version), 85 A TO-94 (TO-209AC) PRIMARY CHARACTERISTICS Package TO-94 (TO-209AC) Circuit configuration Single SCR I T(AV) 85 A V DRM /V RRM 400 V, 0 V, 0 V, 0 V V TM 2.15
More informationThree phase bridge. (Power Module), 200 A
Three Phase Bridge (Power Module), 2 A VS-2MT4KPbF MTK PRIMARY CHARACTERISTICS I O 2 A V RRM 4 V Package MTK Circuit configuration Three phase bridge FEATURES Package fully compatible with the industry
More informationPhase Control Thyristors (Stud Version), 200 A
TO209AB (TO93) ST180SPbF Series FEATURES Center amplifying gate International standard case TO209AB (TO93) Hermetic metal case with ceramic insulator (Also available with glassmetal seal up to 1200 ) RoHS
More informationMedium Power Silicon Rectifier Diodes, (Stud Version), 12 A
S-1N1...A, S-1N36..A Series Medium Power Silicon Rectifier Diodes, (Stud ersion), 1 A DO-4 (DO-3AA) PRIMARY CHARACTERISTICS I F(A) 1 A Package DO-4 (DO-3AA) Circuit configuration Single FEATURES oltage
More informationPhase Control Thyristors (Stud Version), 110 A
Phase Control Thyristors (Stud Version), 110 A TO-209AC (TO-94) PRODUCT SUMMARY I T(AV) 110 A V DRM /V RRM 400 V, 1600 V V TM 1.52 V I GT 150 ma T J -40 C to 140 C Package TO-209AC (TO-94) Diode variation
More informationHEXFRED Ultrafast Diodes, 100 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) 2.5 V t rr (typical) 150 ns I F(DC) at T C 110 A at C Package INT-A-PAK Circuit configuration
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) Type ADD-A-PAK A Modules - Diode, High Voltage MECHANICAL DESCRIPTION
More informationStandard Recovery Diodes (Stud Version), 12 A
Standard Recovery Diodes (Stud Version), 12 A VS- FEATURES High surge current capability Stud cathode and stud anode version Wide current range DO-203AA (DO-4) Types up to 1200 V V RRM Designed and qualified
More informationFRED Pt Gen 4 Single Ultrafast Diode, 500 A (INT-A-PAK Power Modules)
FRED Pt Gen 4 Single Ultrafast Diode, 5 A (INT-A-PAK Power Modules) VS-VSKEF5/6PbF INT-A-PAK PRODUCT SUMMARY V R 6 V I F(AV) at T C 5 A at 55 C t rr at 4 ns Type Modules - diode, high voltage Package INT-A-PAK
More informationStandard Recovery Diodes (Stud Version), 300 A
Standard Recovery Diodes (Stud Version), 300 A DO-205AB (DO-9) PRODUCT SUMMARY I F(AV) 300 A Package DO-205AB (DO-9) Circuit configuration Single diode FEATURES Alloy diode Popular series for rough service
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) at 300 A at 2.18 V t rr (typical) at 45 A 233 ns I F(DC) at T C 300 A at 60 C Package
More informationSingle phase bridge. (Power Modules), 25 A / 35 A
Single Phase Bridge (Power Modules), 25 A / 35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 200 V to 1200 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationSingle Phase Rectifier Bridge, 3 A, 6 A
S-, S- Series Single Phase Rectifier Bridge, 3 A, 6 A FEATURES Suitable for printed circuit board or chassis mounting Compact construction High surge current capability Material categorization: for definitions
More informationInverter Grade Thyristors (Stud Version), 300 A
Inverter Grade Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A V DRM /V RRM V, 800 V, 1 V V TM 2.16 V I TSM at 3000 A I TSM at 60 Hz 3150 A I GT ma T J -40 C to
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series High Voltage Phase Control Thyristor, 70 A
High Voltage Phase Control Thyristor, 70 A Super TO-247 PRODUCT SUMMARY 2 (A) 1 (K) (G) 3 Package Super TO-247 Diode variation Single SCR I T(AV) 70 A V DRM /V RRM 1200 V, 1600 V V TM 1.4 V I GT 100 ma
More informationThree Phase Bridge (Power Modules), 90/110 A
9-MT.KPbF Series MTK Three Phase Bridge (Power Modules), 9/ A FEATURES Package fully compatible with the industry standard INT-A-PAK power modules series High thermal conductivity package, electrically
More informationVS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series Standard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 85 A Package
More informationStandard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A
Standard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A 80PF(R)... DO-5 (DO-203AB) 80PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability Designed for a wide range of applications
More informationSingle phase bridge. (Power Modules), 25 A/35 A
Single Phase Bridge (Power Modules), 25 A/35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 1 V to 1600 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A
VS-80PF(R)...(W) High Voltage Series Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A 80PF(R)... 80PF(R)...W DO-5 (DO-203AB) DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 80 A Package
More informationThree Phase Bridge, 130 A to 160 A (Power Modules)
Three Phase Bridge, 3 A to 6 A (Power Modules) VS-3-6MT..KPbF Series PRODUCT SUMMARY I O V RRM Package Circuit MTK 3 A to 6 A 8 V to 6 V MT-K Three phase bridge FEATURES Package fully compatible with the
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Diffused diode High voltage ratings up to
More informationStandard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A
VS-95PF(R)...(W) High Voltage Series Standard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A 95PF(R)... DO-5 (DO-203AB) 95PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability
More informationStandard Recovery Diodes, (Stud Version), 300 A
Standard Recovery Diodes, (Stud Version), 300 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 300 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage rating
More informationInsulated Single Phase Hyperfast Bridge (Power Modules), 60 A
Insulated Single Phase Hyperfast Bridge (Power Modules), 6 A SOT-227 PRIMARY CHARACTERISTICS V RRM 65 V I O at T C = 123 C 6 A t rr 63 ns Type Modules - Bridge, Hyperfast Package SOT-227 Circuit configuration
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 3 A (INTAPAK Power Modules) VSVSKCU3/6PbF INTAPAK PRIMARY CHARACTERISTICS V R 6 V V F (typical).23 t rr (typical) 3 ns I F(AV) at T C 3 A at 48 C Package INTAPAK Circuit configuration
More informationSingle phase bridge. (Power Modules), 25 A, 35 A
Single Phase Bridge (Power Modules), 25 A, 35 A GBPC...A GBPC...W PRIMARY CHARACTERISTICS I O 25 A, 35 A V RRM V to V Package GBPC..A, GBPC..W Circuit configuration Single phase bridge FEATURES Universal,
More informationStandard Recovery Diodes (Stud Version), 400 A
Standard Recovery Diodes (Stud Version), 400 A DO-205AB (DO-9) FEATURES Wide current range High surge current capabilities Stud cathode and stud anode version Standard JEDEC types Designed and qualified
More informationHigh Voltage Phase Control Thyristor, 12 A
High oltage Phase Control Thyristor, 2 3L TO-220B PRIMRY CHRCTERISTICS I T() 8 DRM / RRM 800 TM.2 I GT 5 m T J -40 C to 25 C Package Circuit configuration 2 () (K) (G) 3 3L TO-220B Single SCR FETURES Designed
More informationThree Phase Bridge (Power Modules), 25 A to 35 A
Three Phase Bridge (Power Modules), 25 A to 35 A D-63 PRODUCT SUMMARY I O 25 A to 35 A V RRM V to 6 V Package D-63 Circuit Three phase bridge FEATURES Universal, 3 way terminals: push-on, wrap around or
More informationStandard Recovery Diodes, (Stud Version), 200 A
VS- Standard Recovery Diodes, (Stud Version), 200 A DO-30 (DO-205AC) PRIMARY CHARACTERISTICS I F(AV) 200 A Package DO-30 (DO-205AC) Circuit configuration Single FEATURES Wide current range High voltage
More informationThree Phase Bridge (Power Modules), 25 A to 35 A
VS26MT, VS Three Phase Bridge (Power Modules), 25 A to 35 A D63 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM V to 6 V Package D63 Circuit configuration Three phase bridge FEATURES Universal, 3 way terminals:
More informationStandard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available Types up to 400 V V RRM Designed and qualified for industrial
More informationPower Rectifier Diodes (T-Modules), 40 A to 110 A
THF..., THF..., T85HF..., T1HF... Series (T-Modules), A to 1 A FEATURES Electrically isolated base plate D-55 Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly
More informationHigh Voltage, Input Rectifier Diode, 10 A
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series High Voltage, Input Rectifier Diode, A TO-22 FULL-PAK PRODUCT SUMMARY Base cathode 3 Cathode Anode Package TO-22FP I F(AV) A V R 8 V to 2 V V F at I F. V I FSM
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-63 FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E3359 approved
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-2ETS8FP-M3, VS-2ETS2FP-M3 High Voltage, Input Rectifier Diode, 2 A 2 2L TO-22 FullPAK PRIMARY CHARACTERISTICS Cathode 2 Anode I F(AV) 2 A V R 8 V, 2 V V F at I F. V I FSM 3 A T J max. C Package 2L TO-22
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Alloy diode High current carrying capability
More informationStandard Recovery Diodes, (Hockey PUK Version), 800 A
Standard Recovery Diodes, (Hockey PUK Version), 8 A VS- A-PUK (DO-AA) PRIMARY CHARACTERISTICS I F(AV) 8 A Package A-PUK (DO-AA) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationStandard Recovery Diodes, (Stud Version), 400 A
Standard Recovery Diodes, (Stud Version), 400 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 400 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationVS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A
Power Silicon Rectifier Diodes, (Stud Version), 35 A, 4 A, A FEATURES Low leakage current series Good surge current capability up to A Material categorization: for definitions of compliance please see
More informationFast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
VS-6FL(R), VS-2FL(R), VS-6FL(R) Series Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities
More informationStandard Recovery Diodes, (Stud Version), 85 A
Vishay High Power Products Standard Recovery Diodes, FEATURES High surge current capability Stud cathode and stud anode version Leaded version available RoHS COMPLIANT PRODUCT SUMMARY I F(AV) DO-3AB (DO-5)
More informationSingle Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
More informationSurface Mount Fast Soft Recovery Rectifier Diode, 10 A
VS-ETF..SPbF Series Surface Mount Fast Soft Recovery Rectifier Diode, A TO-63AB (D PAK) PRODUCT SUMMARY 3 Base cathode + 3 Anode - - Anode Package TO-63AB (D PAK) I F(AV) A V R V, V V F at I F.33 V I FSM
More informationVS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A
Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, A FEATURES Low leakage current series Good surge current capability up to 00 A Material categorization: for definitions of compliance please
More informationThree Phase Bridge (Power Module), 45 A to 100 A
40MT1.0P.PbF, 0MT1.0P.PbF, MT1.0P.PbF Series Three Phase Bridge (Power Module), 45 A to A FEATURES Vishay High Power Products MT...PA PRODUCT SUMMARY I O MT...PB 45 A to A Low V F Low profile package Direct
More informationInput Rectifier Diode, 80 A
Input Rectifier Diode, 8 A 8EPS16 High Voltage Series Vishay High Power Products TO-247AC PRODUCT SUMMARY V F at 8 A I FSM V RRM Base cathode 4, 2 1 3 Anode Anode 1.17 V 145 A 16 V DESCRIPTION/FEATURES
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationSingle Phase Bridge (Power Modules), 25/35 A
MB Series MB Single Phase Bridge FEATURES Universal, 3 way terminals: Push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume
More informationFast Recovery Diodes (Stud Version), 40 A, 70 A, 85 A
VS-4HFL, VS-7HFL, VS-85HFL Series Fast Recovery Diodes (Stud Version), 4 A, 7 A, 85 A FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities Stud cathode
More informationInput Rectifier Diode, 60 A
Input Rectifier Diode, 6 A Vishay High Power Products TO-247AC modified PRODUCT SUMMARY V F at 6 A I FSM V RRM Base common cathode 2 3 Anode Anode 2.9 V 95 A 8/2 V DESCRIPTION/FEATURES The 6EPS.. rectifier
More informationHEXFRED Ultrafast Soft Recovery Diode, 140 A
HEXFRED Ultrafast Soft Recovery Diode, 4 A VS-HFA4FA SOT-7 PRIMARY CHARACTERISTICS V R V V F (typical).8 V t rr (typical) 48 ns I F(DC) at T C, per module 4 A at 74 C I F(AV) at T C, per module 4 A at
More informationAAP Gen 7 (TO-240AA) Power Modules Schottky Rectifier, 200 A
AAP Gen 7 (TO-24AA) Power Modules Schottky Rectifier, 2 A AAP Gen 7 (TO-24AA) PRIMARY CHARACTERISTICS I F(AV) 2 A V R 5 V Package AAP Gen 7 (TO-24AA) Circuit configuration Two diodes doubler circuit MECHANICAL
More informationHEXFRED Ultrafast Soft Recovery Diode, 220 A
HEXFRED Ultrafast Soft Recovery Diode, A VS-HFAFA SOT-7 PRIMARY CHARACTERISTICS V R V V F (typical).68 V t rr (typical) 58 ns I F(AV) per module at T C A at 38 C Package SOT-7 FEATURES Fast recovery time
More informationStandard Recovery Diodes (Stud Version), 70 A
Standard Recovery Diodes (Stud Version), 70 A VS- FEATURES High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available DO-203AB
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-34A FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E359 approved
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationPhase Control SCR, 70 A
Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for
More informationSurface Mountable Phase Control SCR, 16 A
D 2 PAK PRODUCT SUMMARY V T at 16 A I TSM V RRM Anode 2 1 3 Cathode Gate < 1.25 V 300 A 800 V to 1600 V FEATURES Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Compliant to RoHS directive 2002/95/EC
More informationHigh Voltage Surface Mountable Input Rectifier Diode, 8 A
High Voltage Surface Mountable Input Rectifier Diode, 8 A 1 DPAK (TO-5AA) PRIMARY CHARACTERISTICS 3 Base cathode + 1 3 Anode - - Anode I F(AV) 8 A V R 8 V, 1 V V F at I F 1.1 V I FSM 15 A T J max. 15 C
More informationHigh Performance Schottky Rectifier, 240 A
High Performance Schottky Rectifier, 240 A HALF-PAK (D-67) Lug terminal anode Base cathode FEATURES 175 C T J operation Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness
More information