Input Rectifier Diode, 80 A

Transcription

1 Input Rectifier Diode, 8 A 8EPS16 High Voltage Series Vishay High Power Products TO-247AC PRODUCT SUMMARY V F at 8 A I FSM V RRM Base cathode 4, Anode Anode 1.17 V 145 A 16 V DESCRIPTION/FEATURES The 8EPS16 rectifier High Voltage Series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 15 C junction temperature. Typical applications are in input rectification and these products are designed to be used with Vishay HPP switches and output rectifiers which are available in identical package outlines. This product has been designed and qualified for industrial level. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I F(AV) Sinusoidal waveform 8 A V RRM 16 V I FSM 145 A V F 8 A, T J = 25 C 1.17 V T J - 4 to 15 C VOLTAGE RATINGS PART NUMBER V RRM, MAXIMUM PEAK REVERSE VOLTAGE V V RSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V I RRM AT 15 C ma 8EPS ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current I F(AV) T C = 1 C, 18 conduction half sine wave 8 Maximum peak one cycle 1 ms sine pulse, rated V RRM applied 145 A I FSM non-repetitive surge current 1 ms sine pulse, no voltage reapplied 15 1 ms sine pulse, rated V RRM applied 1 5 Maximum I 2 t for fusing I 2 t 1 ms sine pulse, no voltage reapplied 14 A 2 s Maximum I 2 t for fusing I 2 t t =.1 to 1 ms, no voltage reapplied 15 A 2 s Document Number: 9392 For technical questions, contact: diodes-tech@vishay.com Revision: 19-Jun-8 1

2 8EPS16 High Voltage Series Vishay High Power Products Input Rectifier Diode, 8 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum forward voltage drop V FM 8 A, T J = 25 C 1.17 V Forward slope resistance r t 3.17 mω T J = 15 C Threshold voltage V F(TO).73 V T J = 25 C.1 Maximum reverse leakage current I RM V R = Rated V RRM T J = 15 C 1. ma THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction and storage temperature range T J, T Stg - 4 to 15 C Maximum thermal resistance, junction to case R thjc DC operation.35 Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight R thja 4 R thcs Mounting surface, smooth and greased.2 C/W 6 g.21 oz. minimum 6 (5) kgf cm Mounting torque maximum 12 (1) (lbf in) Marking device Case style TO-247AC (JEDEC) 8EPS16 For technical questions, contact: diodes-tech@vishay.com Document Number: Revision: 19-Jun-8

3 Input Rectifier Diode, 8 A 8EPS16 High Voltage Series Vishay High Power Products Maximum Allowable Case Temperature ( C) R thjc (DC) =.35 K/W 6 Conduction angle Maximum Average Forward Power Loss (W) DC RMS limit Conduction period T J = 15 C Fig. 1 - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics Maximum Allowable Case Temperature ( C) R thjc (DC) =.35 K/W Conduction period 18 DC Fig. 2 - Current Rating Characteristics Peal Half Sine Wave Forward Current (A) At any rated load condition and with rated V RRM applied following surge. Initial T J = 15 C at 6 Hz.83 s at 5 Hz.1 s 1 1 Number of Equal Amplitude Half Cycle Current Pulse (N) Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average Forward Power Loss (W) RMS limit Conduction angle T J = 15 C Fig. 3 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) Maximum non-repetitive surge current versus pulse train duration. Initial T J = 15 C No voltage reapplied Rated V RRM reapplied.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Document Number: 9392 For technical questions, contact: diodes-tech@vishay.com Revision: 19-Jun-8 3

4 8EPS16 High Voltage Series Vishay High Power Products Input Rectifier Diode, 8 A Instantaneous Forward Current (A) T J = 25 C T J = 15 C Instantaneous Forward Characteristics Fig. 7 - Forward Voltage Drop Characteristics 1 Z thjc - Transient Thermal Impedance ( C/W).1 Single pulse D =.5 D =.33 D =.25 D =.17 D =.8 Steady state value (DC operation) Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance Z thjc Characteristics 1 For technical questions, contact: diodes-tech@vishay.com Document Number: Revision: 19-Jun-8

5 Input Rectifier Diode, 8 A 8EPS16 High Voltage Series Vishay High Power Products ORDERING INFORMATION TABLE Device code 8 E P S Current rating (8 = 8 A) 2 - Circuit configuration: 3 - E = Single diode Package: 4 - P = TO-247AC Type of silicon: S = Standard recovery rectifier 5 - Voltage rating (16 = 16 V) 6 - None = Standard production PbF = Lead (Pb)-free Dimensions Part marking information LINKS TO RELATED DOCUMENTS Document Number: 9392 For technical questions, contact: diodes-tech@vishay.com Revision: 19-Jun-8 5

6 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91 Revision: 18-Jul-8 1