Fast Soft Recovery Rectifier Diode, 60 A

Transcription

1 6EPF.. Base common cathode Cathode Anode TO-247AC modified PRODUCT SUMMARY V F at 3 A t rr V RRM Anode 1 6CPF.. Base common cathode 2, 4 TO-247AC Anode 3 < 1.2 V 95 ns V/1 V FEATURES/DESCRIPTION The 6EPF.. and 6CPF.. fast soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. This product series has been designed and qualified for industrial level. APPLICATIONS Output rectification and freewheeling in inverters, choppers and converters Input rectifications where severe restrictions on conducted EMI should be met MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS V RRM /1 V I F(AV) Sinusoidal waveform 6 I FSM 7 A t rr 1 A, - A/μs 95 ns V F 3 A, 1.2 V Range - to 15 C VOLTAGE RATINGS PART NUMBER V RRM, MAXIMUM PEAK REVERSE VOLTAGE V V RSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 6EPF1, 6CPF1 1 6EPF12, 6CPF I RRM AT 15 C ma 8 ABSOLUTE MAXIMUM RATINGS Maximum average forward current I F(AV) T C = 13 C, 18 conduction half sine wave 6 Maximum peak one cycle 1 ms sine pulse, rated V RRM applied 7 A I FSM non-repetitive surge current 1 ms sine pulse, no voltage reapplied 83 1 ms sine pulse, rated V RRM applied 245 Maximum I 2 t for fusing I 2 t 1 ms sine pulse, no voltage reapplied 346 A 2 s Maximum I 2 t for fusing I 2 t t =.1 ms to 1 ms, no voltage reapplied 34 6 A 2 s Document Number: For technical questions, contact: diodestech@vishay.com Revision: 9-Dec-9 1

2 ELECTRICAL SPECIFICATIONS Maximum forward voltage drop V FM 6 A, 1.4 V Forward slope resistance r t 4.6 mω = 125 C Threshold voltage V F(TO).9 V.1 Maximum reverse leakage current I RM V R = Rated V RRM 8 ma RECOVERY CHARACTERISTICS Reverse recovery time t rr IF at 6 Apk 48 ns Reverse recovery current I rr 25 A/μs 8 A Reverse recovery charge Q rr 25 C 2.7 μc Snap factor S.6 dir dt t rr Q rr t I RM(REC) THERMAL - MECHANICAL SPECIFICATIONS Maximum junction and storage temperature range, T Stg - to 15 C Maximum thermal resistance, junction to case R thjc DC operation.4 Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight Mounting torque Marking device R thja R thcs Mounting surface, smooth and greased.2 C/W 6 g.21 oz. minimum 6 (5) kgf cm maximum 12 (1) (Ibf in) Case style TO-247AC modified (JEDEC) Case style TO-247AC 6EPF1 6EPF12 6CPF1 6CPF12 For technical questions, contact: diodestech@vishay.com Document Number: Revision: 9-Dec-9

3 Maximum Allowable Case Temperature ( C) R thjc (DC) =.4 C/W Conduction angle Maximum Average Forward Power Loss (W) DC 18 9 RMS limit Conduction period 6 8 Fig. 1 - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics Maximum Allowable Case Temperature ( C) R thjc (DC) =.4 C/W Conduction period DC Peak Half Sine Wave Forward Current (A) At any rated load condition and with rated V RRM applied following surge. Initial at 6 Hz.83 s at 5 Hz. s Fig. 2 - Current Rating Characteristics Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average Forward Power Loss (W) RMS limit Conduction angle Peak Half Sine Wave Forward Current (A) Maximum non-repetitive surge current versus pulse train duration. Initial No voltage reapplied Rated V RRM reapplied Pulse Train Duration (s) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current Document Number: For technical questions, contact: diodestech@vishay.com Revision: 9-Dec-9 3

4 Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics t rr - Maximum Reverse Recovery Time (ns) = 3 A = 6 A Q rr - Maximum Reverse Recovery Charge (µc) = 6 A = 3 A Fig. 8 - Recovery Time Characteristics, Fig. 1 - Recovery Charge Characteristics, t rr - Maximum Reverse Recovery Time (ns) = 6 A = 3 A Fig. 9 - Recovery Time Characteristics, Q rr - Maximum Reverse Recovery Charge (µc) = 6 A = 3 A Fig Recovery Charge Characteristics, For technical questions, contact: diodestech@vishay.com Document Number: Revision: 9-Dec-9

5 I rr - Maximum Reverse Recovery Current (A) = 6 A = 3 A I rr - Maximum Reverse Recovery Current (A) = 6 A = 3 A Fig Recovery Current Characteristics, Fig Recovery Current Characteristics, Z thjc - Transient Thermal Impedance ( C/W) Single pulse D =.5 D =.33 D =.25 D =.17 D = Square Wave Pulse Duration (s) Fig Thermal Impedance Z thjc Characteristics Steady state value (DC operation) 1 Document Number: For technical questions, contact: diodestech@vishay.com Revision: 9-Dec-9 5

6 ORDERING INFORMATION TABLE Device code 6 E P F Current rating (6 = 6 A) 2 - Circuit configuration: E = Single diode C = Single diode, 3 pins 3 - Package: P = TO-247AC modified 4 - Type of silicon: F = Fast recovery 5 - Voltage code x = V RRM 6 - None = Standard production PbF = Lead (Pb)-free 1 = V 12 = 1 V Dimensions Part marking information LINKS TO RELATED DOCUMENTS TO-247AC modified TO-247AC TO-247AC modified TO-247AC For technical questions, contact: diodestech@vishay.com Document Number: Revision: 9-Dec-9

7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9 Revision: 18-Jul-8 1