Gautam Buddha University

Transcription

1 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida Website : BID FORM FOR THE SUPPLY / INSTALLATION OF LABORATORY EQUIPMENTS FOR M.Sc. APPLIED PHYSICS II SEMESTER OF SCHOOL OF VOCATIONAL STUDIES & APPLIED SCIENCES TENDER BID : M.Sc. Applied Physics II Semester Page 1

2 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida SCHOOL OF VOCATIONAL STUDIES & APPLIED SCIENCES Tender SUPPLY/INSTALLATION OF LABORATORY EQUIPMENTS OF M.Sc. APPLIED PHYSICS II SEMESTER Opening Date of Bid 01 st January 013 Closing Date & Time of Bid 1 st January 013 upto 3.00 p.m. Last date & Time of Bid Submission 1 st January 013 upto 5.00 p.m. Technical Bid Opening Date, Time & Place Earnest Money Deposit Tender Fee Completion Period nd January 013 at a.m. Venue : Conference Room of the Registrar Office, 1st Floor, Administrative Building, G.B.U., Gr. Noida. (Bidder/authorized representative of bidders may attend the bid opening proceedings on the above mentioned day and time). % of the offered cost (Refundable) Rs (Non-refundable) Within 8-9 weeks from the date of Purchase Order issued Bid System Two Tier : 1) Technical Bid ) Financial Bid Technical Bid Shall Contain Financial Bid i. Technical specifications of each equipment quoted ii. All documents in support of commercial terms & conditions and eligibility criteria. iii. Bidders Proforma iv. EMD in form of DD/FDR/BG v. Tender Fee in form of demand drafts / pay orders. The Financial Bid shall contain rate schedule only. The price shall be in words as well as in numeric numbers. TENDER BID : M.Sc. Applied Physics II Semester Page

3 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida Name of the Organization TECHNICAL BID (BIDDER S PROFORMA) (To be submitted in separate envelope) Pl. mentioned whether a Government Company / Public Ltd. / Private Ltd. / Partnership / Proprietorship Date of incorporation/registration (pl. enclose photocopy of cert.) Specify the number of years in this line of activity by the company PAN/TIN registration No. (pl. enclose photocopy of cert.) Service Tax, Sales Tax/VAT registration No. (pl. enclose photocopy of cert.) Provide the postal address, telephone & fax numbers, and address of the nearest service center. Are you the manufacturer / authorized dealer / distributor/ retailer for the product quoted (please attached relevant certificate): Mention delivery period from the date of the placement of an official purchase order Whether technical specification are attached with Technical Bid or not. Deviations in specifications, if yes, please mention in separate sheet. Turnover in the last three financial years (Figures should be in Indian Rupees in Lakhs; please attach the certified copies of balance sheet with trading, profit & loss account) : (if the figures for 11-1 are not available then they may furnish financial statement of year 08-09) Detail of the similar item(s) supplied & installed during last three years at IITs, NIT s or Central / State Universities or any Academic Institute of National Repute (please enclose Performance Certificate/Purchase Order) Name of the item(s) P.O. Value (Rs.) Name of the Institution, item supplied. TENDER BID : M.Sc. Applied Physics II Semester Page 3

4 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida DECLARATION I/We hereby declare that the information given in the technical bid by the undersigned is correct and fulfill all conditions as published in the tender document. (SIGNATURE OF THE BIDDER) WITH SEAL NAME:.. ADDRESS : Tel./Mobile No. :... TENDER BID : M.Sc. Applied Physics II Semester Page 4

5 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida School of Vocational Studies & Applied Sciences (Technical Specifications of the Required Equipment) S.No Name of Item Specifications Qty 1. 30MHz Dual Channel Oscilloscope with Frequency Counter 30MHz Bandwidth 1mV/div High Vertical Sensitivity Internal 5 Digits Real-Time Frequency Counter LCD Readout Display for Vertical/Horizontal/Frequency Measurement Auto Time-Base Buzzer Alarm TV (TV-V, TV-H) Trigger Modes XY Mode Z-Axis Input and External Trigger Input 4 Function Generator with display Frequency Range : MHz Wave forms: Sine, Triangular, Square, Ramp, TTL and CMOS Output. External Voltage Controlled frequency Function. Duty Cycle Control with signal Inversion Capability. Two- Step (-0 db X ) and variable attenuator. Built in 6 Digit Contour with INT/ EXT Function Upto 100 MHz / high resolution 4 3 Digital LCR meter Range Accuracy : mh, 0mH, 00mH, H, 0H, 00H Resolution : ± (.0%+5d), ± (5.0%+5d), ± (5.0%+15d), ± (5.0%+5d) Measuring : 1µH, 10µH, 100µH, 1mH, 10mH, 100mH, Frequency : Approx 00Hz Range :0Ω, 00Ω, kω, 0kΩ, mω, 0mΩ, 00mΩ Accuracy :± (0.8%+1d), ± (0.8%+5d), ± (0.8%+3d), ± (1.0%+15d), 1 TENDER BID : M.Sc. Applied Physics II Semester Page 5

6 4. 3 4/5 Digital Multimeter With Frequency, Temperature Measurement With Large LCD Display DC Voltage:400mV/4V/40V/400V/1000V : ±(0.5%+4) AC Voltage: V/0V/00V/750V : ±(0.8%+5) DC Current:4mA/ 40mA/400mA/10A : ±(0.8%+4) AC Current: 0mA/00mA/0A : ±(1.0%+5) Resistance: 00Ω/KΩ/0KΩ/00KΩ/MΩ/00MΩ : ±(0.8%+3) Capacitance: 0nF/uF/00uF : ±(.5%+0) Frequency : khz/00khz : ±(3.0%+15) Celsius : (- 40 ~ 1000) o C : ±(1.0%+3) 5 DC Regulated Multiple (Triple) Output Power Supply 0-30V/A Dual, +5V/3A Constant Current and Constant Voltage 4 DPMs, for Voltage and Two for Current 4 6 Diode & Zener Diode Characteristics Built in 0 to +/-1V / 50mA Variable Voltage Source, 18V /50Hz AC Source, Resistors, Diode (Ge, Si, Zener), Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental 7 FET Characteristics with meter Built in 0 to +1V / 50mA Variable Voltage Source, FET Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of Patch Chords & Experimental TENDER BID : M.Sc. Applied Physics II Semester Page 6

7 8 Multivibrators Trainer Built in +/-1V / 350mA DC Power Supply, (Transistor Independent Multivibrators, (3 Nos.) Version)(Astable, Bistable & Assembled in Metal / Wooden Box with Monostable Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 9 Feed Back Amplifiers (Voltage Series Voltage Shunt, Current Series and Current Shunt ) Built in +1V / 350mA DC Power Supply, Independent Transistor amplifier, (4Nos.) Feedback Networks, (4Nos.) Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 10 Single Stage Common Emitter Transistor Amplifier Built in +1 V / 350mA DC Power Supply, NPN Transistor Amplifier, Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 11 Two Stage RC Coupled Amplifier Built in + 1V / 350mA DC Power Supply, Stage Transistor CE amplifier, Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 1 Op Amp Characteristics Built in +/-1V / 350mA DC Power Supply, OP-Amps (741), Variable I/O Impedance, Component Bank, Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms. TENDER BID : M.Sc. Applied Physics II Semester Page 7

8 13 Op Amp Application Trainer Built in +/-1V / 350mA DC Power Supply Summer, Sub tractor, Differentiator, Integrator, Inverting Amplifier, Non- Inverting Amplifier, Voltage follower, Current follower, Clipping Amplifier Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms. 14 Op Amp as Differential Amplifier Built in +/- 1V/350mA DC Power Supply, OP-Amp Differential Amplifier (741), Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms Series & Parallel Resonance with built in OSC Built in +/- 1V / 350mA DC Power Supply Variable Frequency Sine wave Generator Series and Parallel Resonant circuit Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 16 Digital IC Trainer-I (Full System) (Gate s, FF S, Counter s) +5V / 1 Amp DC power Supply Quad -Input NAND Gate (7400) Quad -Input NOR Gate (740) Quad -Input AND Gate (7408) Quad -Input OR Gate (743) Hex Inverters (7404) Dual 4-Input NAND Gate TENDER BID : M.Sc. Applied Physics II Semester Page 8

9 (740) Dual 4-Input NOR Gate (745) Dual -Ex-OR Gate (7486) Dual JK Flip Flop (7476) 4-Bit R /L Shift Register (7495) Up / Down Binary Counter (74193) 4-Bit Binary Full Adder (7483) 4-Bit Magnitude Comparator (7485) BCD to 7-Segment Decoder (7447) Monostable Multivibrator (7411) Synchronous Binary Counter (74163) Decade Counter (7490) 7-Segment LED Display ( Nos.) Logic Input Switches (10 Nos.) Logic Status Indicators (10 Nos.) Bounce less Pulsar 1Hz & 1KHz TTL Clocks Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with mm Socket for test points. Set of patch Chords & Experimental Manual 17 General Purpose Electronics Trainer +5V /1 Amp & +15V, DC Power Supply Solder less Board (840 Tie Points) ( Nos.) 0 to 0 V DC Variable Source, 0 to -0 V DC Variable Source 5V,10V,15V,0 V AC Power supplies 7-Segment Display, Logic Input Switches, Logic Status Indicators, Logic Probe (High & Low) Loud Speaker 8 ohms, w (1Nos.) Pulsar (4 Nos)Hz, 1 Hz, 1 KHz, 10 KHz, 1 MHz Clocks. Sine, Square, Triangular Signal Generator up to 100 KHz TENDER BID : M.Sc. Applied Physics II Semester Page 9 1

10 Variable Pots of 50,. K, 10K, K. 100K ohms 0 Pin ZIF Socket with all Pins brought out on mm socket. Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with mm Socket for test points. Set of patch Chords & Experimental Manual 8 Bit ADC A / D Converter Successive approximation Using ADC Counter Comparator Method using Up / Down Counter (74161) 1 K Hz TTL Clock, Logic Status Indicators, (16Nos.) 0 to 5V Variable Analog Signal, +5V & +/-1V / 350mA DC Power Supply, Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms. 8-Bit DAC ( Method) 8-Bit Digital to Analog Converter using R-R Ladder Network, 8-Bit Binary Counter (74161), Summing Amplifier (741) 1 K Hz TTL Clock, Logic Input Switches, (8 Nos.) Logic Status Indicators, (8 Nos.) +5V & +1V / 350mA DC Power Supply, Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms. 555 Timer Trainer Built in +/-1V / 350mA DC Power Supply, 555 Timer IC`s, ( Nos.) Resistors, ( Nos.) TENDER BID : M.Sc. Applied Physics II Semester Page 10

11 Capacitors, ( Nos.) Transistors, ( Nos.) Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 1 Schmitt Trigger Circuit Built in +/-1V / 350mA DC Power Supply, Sine wave generator, Schmitt Trigger circuit, Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, 8-Bit UP/Down Counter (Ripple Clock) 4-Bit UP/Down Counter (74191),.. ( Nos.) 1 Hz & 1K Hz TTL clock, Logic I / P Switches, ( Nos.) Logic Status Indicators, (8 Nos.) +5V / 350mA. DC Power Supply, Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points. 3 Semiconductor Devices Characteristics Trainer Built in 1. to 45V / 350mA DC Variable Voltage Source, (0 to 15V) Dual Variable Voltage, Components Like: - DIODE, ZENER DIODE, TANSISTORS (NPN, PNP), FET, MOSFET, SCR, DIAC, TRIC, UJT, THERMISTOR, LDR, PHOTODIODE, PHOTOTRANSISTOR, LED, OPTO COUPLER. Current Limiting Pots, Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage, Set of patch Chords & Experimental TENDER BID : M.Sc. Applied Physics II Semester Page 11

12 4 Fiber Optic Transmitter & Receiver Kit Using TDM (Digital Comm.) Transmitter: Two Nos. Fiber Optic LED s. Transmitter 01 Peak Wavelength of emission 950 nm IR Transmitter 0 Peak wavelength of 660 nm Red Receiver Three Nos. Photo Detector Receiver 01 Photo Transistor Detector Receiver 0 Photo detector with TTL logic output Modulation Techniques Digital communication with Pulse code Modulation (PCM), No of Channels 16 No. of Channels. Time Division Multiplexed, with data rate of 64 KB / Sec. per channels. Frame Marker Two 8 Bit use selectable markers in alternate frames Total Data Rate 1.04 Mbits / Sec. Voice PCM Two Channels, with Telephone Hand sets (A Law) Analog Input 1V Peak to Peak Analog Bandwidth 3.75 KHz FWHM Spectral Width 100nm Fiber Optic Cable Type Plastic Optical Cable, Step Index, Multimode. Core Refractive Index-n Clad Refractive Index-n Numerical Aperture 0.50 Acceptance Angle 60 degrees. Fiber Diameter 1000 microns Outer Diameter.mm No. of Fibers Three Fiber Lengths 0.3, 1 and 3 Meters. Power Supply + /- 5V,+ /- 9V, 3Nos. 1 TENDER BID : M.Sc. Applied Physics II Semester Page 1

13 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida GENERAL TERMS AND CONDITIONS 1. Detailed information about the items and their specifications are available in tender document, which can be downloaded from the University website Two bids system of tender will be adopted. (i) The bid containing technical specifications, EMD, Tender Fee and eligibility documents. (ii) Bid containing financial offer. Technical and financial bids should be submitted in separate covers. These two envelops shall be sealed in a common cover and addressed to The Registrar, Gautam Buddha University, Greater Noida, Gautam Budh Nagar (U.P.) superscribing Tender against Notification Advt. GBU/S&P/01/013, Name of supply: Laboratory Items for M.Sc. Applied Physics II Sem., SOVS&AS so as to reach us on or before last date of bid submission. 3. The Technical Bid and Financial Bid should be duly filled-up. 4. These bids will be opened in two stages. The bid containing technical specifications, EMD, TF and eligibility documents will be opened at first stage and if same is found according to required specifications, the bid containing financial offer shall be opened in second stage. 5. The Technical Bid shall contain all documents in support of quoted item, their specifications, EMD, Tender Fee, terms & conditions and eligibility criteria along with the page number for cited specifications in the company brochure for the particular item. 6. The Financial Bid shall contain price schedule only. The rates and units shall not be overwritten in the price schedule. The price shall be both in words and figures. 7. Eligibility Criteria: All the participating suppliers/firms or principal manufacturer- should meet the following qualifying criteria. The firm should be a registered supplier for such supplies. Following documents are required to be submitted with Technical Bid, to qualify eligibility criteria: a) PAN/TIN registration certificate (self attested). b) Service Tax/Sales Tax/VAT registration certificate (self attested). c) Earnest Money Deposit (EMD) in form of DD/FDR/Bank Guarantee in favour of Gautam Buddha University alongwith the Technical Bid. d) Tender Fee in form of DD/Pay Order in favour of Gautam Buddha University alongwith the Technical Bid. e) Audited copy of balance sheet with trading, profit & loss account for the last three financial years should be submitted (self attested). f) The firm/company should have experience of supplying & installation for similar Equipments/Instruments to institutes of National repute. The company should also furnish a list of clients of last 3 years. g) The bidder must be either sole Manufacturer of the Equipments/Instruments or the authorized agent/representative of the OEM. In the case of agent/representative, certified copy of the agency/authorization issued by the OEM should be enclosed TENDER BID : M.Sc. Applied Physics II Semester Page 13

14 with the tender. h) Authorized signatory should sign on all pages. Bids without authorized signature will be rejected. 8. Offer should be sent in a sealed envelope, submitted either in person or by post on which name and address of the supplier/firm shall be written. Tenders received through E- mails or FAX will not be considered. 9. The technical bids will be opened on scheduled date and time. Bidders/authorized representatives of the bidders intending to attend the tender opening should intimate in advance. 10. The rate quoted should be F.O.R. Gautam Buddha University (Gautam Budh Nagar, Greater Noida, UP) in rupees/foreign currency inclusive of all charges e.g. packing, forwarding local taxes, railway freight, transit insurance etc. The total price should include all accessories required for final installation of the item. Rates of imported goods should be quoted excluding custom duty, as this University is exempted from payment of custom duty (by letter of Department of Scientific and Industrial Research, Ministry of Science & Technology, GOI). 11. The items should have USEPA/International/National validation certificates, wherever applicable. 1. The cost of the tender is Rs.1000/- (Rupees One Thousand) inclusive of taxes (Nonrefundable) and it shall be paid separately in the form of DD/Pay Order drawn in favour of Gautam Buddha University payable at Delhi and should be attached with technical bid envelope. 13. The EMD of the successful bidder will be refunded after getting the Performance Security Deposit (i.e. 10% of PO/WO value). The Performance Security Deposit shall be deposited in the form of FDR/Bank Guaranty, pledged in favour of Gautam Buddha University and will be returned after expiry of the warranty period. The EMD of the unsuccessful bidders will be returned to the firm(s) immediately after finalization of the tenders. No interest will be paid on EMD in any case. 14. The required delivery period must be mentioned against each item. Tenders should preferably be given only for those equipments/items/articles, which are available ex- stock. 15. Detailed specifications with the mention of make and model/version of each item should be clearly given supported by the illustrated pamphlets wherever possible. Quotations without specified make and Model/Version and other particulars may be rejected. The accessories included in the Equipments/Instruments should also be clearly mentioned. 16. Losses or damage in transit will be borne by the Supplier. The supplier may, if he so desires, get the goods insured and include such charges in the tendered rate. 17. Offered prices should be valid for at least 180 days from the last date of receipt of tenders. 18. All legal proceedings, if necessity arises to the University may be any of the parties (University or Contractor/Supplier) shall have to be lodged in the courts situated at Gautam Buddha Nagar and not elsewhere. 19. (a) The items delivery time should be preferably within stipulated period mentioned in purchase order, if fails (b) The Penalty Clause is as under:- Should the bidder fail to deliver the goods within stipulated period, the Competent Authority may, at his discretion, allow an extension in time subject to recovery from the bidder as agreed liquidated damages, and not by way of penalty, a sum equal to the percentage of the value of tender amount which the bidder has failed to supply for period of delay as stated below:- i.delay up to one week 1% TENDER BID : M.Sc. Applied Physics II Semester Page 14

15 ii.delay exceeding one week but not % exceeding two weeks iii.delay exceeding two weeks but 5% not exceeding one month iv.delay exceeding one month 5% for each month and part there of subject to maximum 10% (c) In case of failure to supply the goods within stipulated delivery period and in accordance with the specifications given in the quotations, the University shall be free to cancel the order. 0. Supply of the placed order in part will not be accepted. 1. The University s term for payment: 90% against delivery of items in good condition, installation and putting those in satisfactory working conditions; balanced 10% payment shall be released after 60 days of satisfactory working of the items. No advance payment shall be released.. No revision of price bid will be allowed once the price bids are opened. In case firm/company quoted in foreign currency the price will be converted into Indian Rupee at the conversion rate on the basis of the last day of the bid submission. 3. No increase in price will be allowed after our purchase order(s) are placed. 4. Warranty certificate against all the Itms/Equipments/Instruments developed defects covering warranty period, which commences from the date of installation shall be given at the time of supply of the items. 5. Inspection certificates of the items inspected by the qualified engineer of the manufacturer and packed in accordance with the terms and conditions of this order must be enclosed. 6. During the warranty period whenever the firm is called upon to attend to the rectification of the defects/faults in the consignments, the firm shall attend to the repair work within a period of a week. They should render timely back up service whenever called upon. A certificate to the effect should be attached to the tender. 7. A certificate to the effect that items supplied is fully operational and no additional accessory or space is required to fully functioning the Equipments/Instruments should be issued along with the delivery challans/invoice. GBU reserves the right to refuse payment in the event of not furnishing this certificate at the time of supply. 8. Complete user, technical and service manuals/installation drawings/documentation and spare parts catalogue are to be provided along with the supply of the item. 9. Failure to comply with all the terms and conditions mentioned herein would result in the tender being summarily rejected. 30. Vendors are informed that once the firms are shortlisted based on the eligibility criteria and technical specifications, only then the financial bids of the firms meeting eligibility criteria, technical specifications / requirements would be opened. 31. Conditional tenders will not be accepted. 3. Any cutting and overwriting in the financial bid will not be accepted. 33. GBU reserves the right to change the order quantity or split the orders among multiple vendors without assigning any reason (s) whatsoever. 34. GBU reserves the right to reject any or all the tenders without assigning any reasons whatsoever. 35. whatsoever. Registrar Gautam Buddha University TENDER BID : M.Sc. Applied Physics II Semester Page 15

16 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida ACCEPTANCE I/We accept the above terms and conditions and shall comply with them strictly. SIGNATURE OF THE BIDDER) WITH SEAL NAME:.. ADDRESS :.. Tel./Mobile No.:.. TENDER BID : M.Sc. Applied Physics II Semester Page 16

17 Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 00 UP Act No. 9 of 00, passed by the Uttar Pradesh Legislature) Greater Noida School of Vocational Studies & Applied Sciences FINANCIAL BID S.No Name of Item Qty Model/ Make 30MHz Dual Channel Oscilloscope with 4 1. Frequency Counter Function Generator with display 4 3 Digital LCR meter 1 Unit Price (In figure) Unit Price (In words) Total Cost /5 Digital Multimeter DC Regulated Multiple (Triple) Output Power Supply 4 6 Diode & Zener Diode Characteristics 7 FET Characteristics with meter Multivibrators Trainer (Transistor 8 Version)(Astable, Bistable & Monostable 9 Feed Back Amplifiers (Voltage Series Voltage Shunt, Current Series and Current Shunt ) 10 Single Stage Common Emitter Transistor Amplifier 11 Two Stage RC Coupled Amplifier 1 Op Amp Characteristics 13 Op Amp Application Trainer TENDER BID : M.Sc. Applied Physics II Semester Page 17

18 14 Op Amp as Differential Amplifier 1 15 Series & Parallel Resonance with built in OSC 16 Digital IC Trainer-I (Full System) (Gate s, FF S, Counter s) 17 General Purpose Electronics Trainer Bit ADC 19 8-Bit DAC ( Method) Timer Trainer 1 Schmitt Trigger Circuit 8-Bit UP/Down Counter (Ripple Clock) 3 Semiconductor Devices Characteristics Trainer 4 Fiber Optic Transmitter & Receiver Kit Using TDM (Digital Comm.) 1 Total cost of the offer is Rs. in words (Rupees. I abide by all the terms & conditions of the tender. ACCEPTANCE I/We accept the above terms and conditions and shall comply with them strictly. DECLARATION 1. The rates quoted are inclusive of all taxes and F.O.R University Stores.. The information given in the financial bid by the undersigned is correct. (SIGNATURE OF THE BIDDER) WITH SEAL NAME : ADDRESS :... Tel./Mobile No. :.. TENDER BID : M.Sc. Applied Physics II Semester Page 18