University Visvesvaraya College of Engineering

Size: px
Start display at page:

Download "University Visvesvaraya College of Engineering"

Transcription

1 University Visvesvaraya College of Engineering K.R.Circle, INVITATION FOR QUOTATION TEQIP-II/2013/KA2G01/Shopping/25 29-Nov-2013 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following goods with item wise detailed specifications given at Annexure I, Sr. No Brief Description Quantity Delivery Period(In days) Place of Delivery Installation Requirement (if any) 1 Closed loop DC motor speed control unit DCS 2 Closed loop speed control of 3-phase induction motor ACS 3 DC Chopper Microcontoller based firing circuit 1 45 Principal, 4 DC chopper

2 5 Digital firing circuit 2 45 Principal, 6 Fast Recovery diode Module 3 45 Principal, 7 Parallel Bridge inverter PI/PBI 2A 8 Power IGBT Module : 19A/600V 2 45 Principal, 3 45 Principal, 9 Power MOSFET Module 3 45 Principal, 10 Power Mosfet step up and step down chopper - PMC 2 45 Principal, 11 R & RC firing circuit 3 45 Principal, 12 Regulated DC Power Supply(Dual) 13 Regulated DC Power Supply(Single) 5 45 Principal, 5 45 Principal, 14 SCR Module 3 45 Principal,

3 15 SCR, TRIAC, DIAC, MOSFET & IGBT Characteristics study Unit : CSU 16 Single phase converter firing unit LCD 17 Single Phase converter firing Unit SCF 18 Single phase converter 19 Single phase Cyclo Converter firing circuit 20 Single phase cyclo converter 21 Single phase dual converter Firing Unit 22 Single phase dual converter 23 Single phase PWM inverter - 24V/2A 24 Speed control of a separately excited DC motor using an IGBT or MOSFET 2 45 Principal, 2 45 Principal, 3 45 Principal,

4 chopper 25 Stepper motor controller SMC 26 Three phase converter Firing unit 27 Three phase converter 28 TRIAC Module 3 45 Principal, 29 UJT Relaxation oscillator 3 45 Principal, 2. Government of India has received a credit from the International Development Association (IDA) towards the cost of the Technical Education Quality Improvement Programme[TEQIP]-Phase II Project and intends to apply part of the proceeds of this credit to eligible payments under the contract for which this invitation for quotations is issued. 3. Quotation, 3.1 The contract shall be for the full quantity as described above. 3.2 Corrections, if any, shall be made by crossing out, initialing, dating and re writing. 3.3 All duties and other levies payable by the supplier under the contract shall be included in the unit price. 3.4 Applicable taxes shall be quoted separately for all items.

5 3.5 The prices quoted by the bidder shall be fixed for the duration of the contract and shall not be subject to adjustment on any account. The Prices should be quoted in Indian Rupees only. 4. Each bidder shall submit only one quotation. 5. Quotation shall remain valid for a period not less than 45 days after the last date of quotation submission. 6. Evaluation of Quotations, The Purchaser will evaluate and compare the quotations determined to be substantially responsive i.e. which 6.1 are properly signed ; and 6.2 confirm to the terms and conditions, and specifications. 7. The Quotations would be evaluated for all items together. 8. Award of contract: The Purchaser will award the contract to the bidder whose quotation has been determined to be substantially responsive and who has offered the lowest evaluated quotation price. 8.1 Notwithstanding the above, the Purchaser reserves the right to accept or reject any quotations and to cancel the bidding process and reject all quotations at any time prior to the award of contract. 8.2 The bidder whose bid is accepted will be notified of the award of contract by the Purchaser prior to expiration of the quotation validity period. The terms of the accepted offer shall be incorporated in the purchase order. 9. Payment shall be made in Indian Rupees as follows: Delivery and Installation - 0% of total cost Satisfactory Acceptance - 100% of total cost 10. All supplied items are under warranty of 36 months from the date of successful acceptance of items. 11. You are requested to provide your offer latest by 14:00 hours on 18-Dec Detailed specifications of the items are at Annexure I. 13. Training Clause (if any) required

6 14. Testing/Installation Clause (if any) Required 15. Information brochures/ Product catalogue, if any must be accompanied with the quotation clearly indicating the model quoted for. 16. Sealed quotation to be submitted/ delivered at the address mentioned below, Principal, K.R.Circle, We look forward to receiving your quotation and thank you for your interest in this project. Annexure I (Authorized Signatory) Name & Designation Sr. No Item Name Specifications 1 Closed loop DC motor speed control unit DCS 2 Closed loop speed control of 3-phase induction motor ACS 3 DC Chopper Microcontoller based firing circuit 4 DC chopper power circuit Thyristor controlled rectifier for speed control of DC motor, Armature and tachofeed back, over current protection, DC shunt motor 0.5 HP/220V/1500rpm with mechanical loading arrangement and tachogenerator coupling for tachofeed back, voltmeter and ammeter to measure armature voltage and current, calibrated meter to indicate rpm directly, closed loop system works for speed range from rpm Scope of supply Toshiba make Vector controlled 3 phase AC drive Model VF-S9, 0.5HP / 1440 RPM/ 3 phase squirrel cage induction motor, Mechanical loading arrangement for the motor a) Microcontoller based firing circuit with LCD display to indicate the frequency and duty cycle. Accuracy +/- 1Hz/% and +/- 1% b) DC chopper DCP DC chopper DCP 5 Digital firing circuit e) Digital firing circuit generates isolated trigger pulses

7 for 1 phase converter, Triac and DC chopper s. The firing angle and duty cycle can be varied from steps using a thumb wheel switch with 1 count accuracy 6 Fast Recovery diode Module 7 Parallel Bridge inverter PI/PBI 2A 8 Power IGBT Module : 19A/600V Fast Recovery diode Module : 10A/1000V This unit should contain 2/4 SCR s, 2/4 diodes, LC commutation components and a center tapped transformer type / parallel bridge inverter. Firing circuit to vary the frequency from 25Hz to 250Hz 2A Power IGBT Module : 19A/600V 9 Power MOSFET Module Power MOSFET Module : 15A/400V 10 Power Mosfet step up and step down chopper PMC This unit should contain MOSFET mounted on a heat sink and protected by snubber circuit and fuse. Inductor is to be provided to step up the voltage. 2A 11 R & RC firing circuit RCF consists of R-C components, a thyristor and an AC supply of 20V along with other associated components to study SCR triggering by R and RC circuit 12 Regulated DC Power Supply(Dual) 13 Regulated DC Power Supply(Single) 0 30 V, 2 Amp with overload protection 0 30 V, 2 Amp with overload protection 14 SCR Module SCR Module : 10A/1200V 15 SCR, TRIAC, DIAC, MOSFET & IGBT Characteristics study Unit : CSU 16 Single phase converter firing unit LCD DC power supply from 2.5V to using IC regulator for load current. One more variable DC power supply from 1.5V to for gate current. Micro controller based firing circuit with LCD display to indicate the firing angle. Accuracy -+/ Single Phase converter SCF Firing angle variation from on a graduated

8 firing Unit SCF 18 Single phase converter 19 Single phase Cyclo Converter firing circuit 20 Single phase cyclo converter 21 Single phase dual converter Firing Unit 22 Single phase dual converter 23 Single phase PWM inverter -24V/2A 24 Speed control of a separately excited DC motor using an IGBT or MOSFET chopper scale 2 SCR s / 4SCR s and 2 power diodes to be connected as half / fully controlled bridge. 230V/10A Microcontoller based firing circuit with display to indicate the firing angle. Accuracy +/- 10 Single phase cyclo/converter SCYP 230V / 10A Firing unit SDF works on 230V AC mains. Firing angle variation from with LCD display Single phase dual converter SDP ) Control Circuit based on 89 C 52 micro controller. 2x 16 line LCD display to indicate and monitor the parameters and type of modulation. 5 keys SET, INC, DEC, FRQ/DTY and RUN/STOP to vary and set the parameters. Optocoupler based isolation circuit to drive 4 IGBT s connected as 1-ph. Bridge inverter b) +Power Circuit consists of 4 IGBT s unit builtin diodes of rating 19A/600V. input side a switch and a fuse are provided for DC input 2A. The frequency can be varied from 20Hz to 100Hz. The duty can be varied from 0% to 100% carrier frequency 9 pulses per each half cycle. Microcontroller based control circuit to accurately vary the duty cycle from 0% to 100% and frequency from 50Hz to 500Hz. LCD display (2 line x 16 characters) to display the duty cycle and frequency, key board consists of 4 keys to frequency / duty cycle, increment / decrement the parameter and RUN/STOP the chopper, consists of a power MOSFET and IGBT and a free wheeling diode. In built filtered DC supply 24V, 48V, 110V and 2 amps using step down transformer, diode bridge rectifier and a capacitor filter. A fixed DC supply of 220V for field of DC shunt motor. Digital voltmeter and ammeter to measure voltage and current. Works directly on 230V AC mains. No external DC supply and meters are required. This unit can be used for R

9 load, R-L load, PMDC motors 24V, 48V and 110V. 25 Stepper motor controller SMC 26 Three phase converter Firing unit 27 Three phase converter This unit is microcontroller based controller circuit to accurately generates pulses to energize the stepper motor winding in the desired sequence. Power transistor based driver circuit to drive the stepper motor LCD display to set and display the parameter. From this controller we can set the speed of the stepper motor in RPM, set the number of steps the motor can move. We can set the direction of rotationforward and reverse direction. We can also set Half step and full step mode. Stepper motor of 3 kgs torque fitted to dial marked in degrees and steps TCF generates 6 nos of three phase synchronized isolated trigger pulses to fire SCR s connected in three phase half wave, half controlled bridge, fully controlled bridge and AC phase control. Works on 230V AC mains, Firing angle variation from on a graduated scale. Test points to study the logic circuit and to monitor RYB phase sequence. TCR : This unit consists of 3 SCR s / 6 SCR s and 3 power diodes to be connected as half / fully controlled bridge. A freewheeling diode to be provided. A circuit breaker to be provided to switch ON / OFF the three phase supply to the and for protection. Voltmeter and Ammeter are to be provided to indicate output voltage and current for R / R-L and motor load. 415V / 10A 28 TRIAC Module TRIAC Module : 10A/600V 29 UJT Relaxation oscillator URT 2N 2646 UJT based relaxation oscillator to study its characteristics in synchronized mode

10 FORMAT FOR QUOTATION SUBMISSION (In letterhead of the supplier with seal) Date: To: Sl. Description of Qty. Unit Quoted Unit rate in Rs. Total Price Sales tax and other No. goods (with full (Including Ex Factory price, excise duty, packing and (A) taxes payable Specifications) forwarding, transportation, insurance, other local In In figures costs incidental to delivery and warranty/ guaranty % (B) commitments) Total Cost Gross Total Cost (A+B): Rs. We agree to supply the above goods in accordance with the technical specifications for a total contract price of Rs. (Amount in figures) (Rupees amount in words) within the period specified in the Invitation for Quotations.

11 We confirm that the normal commercial warranty/ guarantee of months shall apply to the offered items and we also confirm to agree with terms and conditions as mentioned in the Invitation Letter. We hereby certify that we have taken steps to ensure that no person acting for us or on our behalf will engage in bribery. Signature of Supplier Name: Address: Contact No:

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/28

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/28 INVITATION FOR QUOTATION TEQIP-II/2013/UP1G01/Shopping/28 09-Nov-2013 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following

More information

INVITATION FOR QUOTATION. TEQIP-III/2018/vecl/Shopping/82

INVITATION FOR QUOTATION. TEQIP-III/2018/vecl/Shopping/82 INVITATION FOR QUOTATION TEQIP-III/2018/vecl/Shopping/82 05-Jul-2018 To,.. Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for

More information

INVITATION FOR QUOTATION. TEQIP-II/2017/btec/Shopping/2

INVITATION FOR QUOTATION. TEQIP-II/2017/btec/Shopping/2 INVITATION FOR QUOTATION TEQIP-II/2017/btec/Shopping/2 12-Oct-2017 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the

More information

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/43

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/43 INVITATION FOR QUOTATION TEQIP-II/2013/UP1G01/Shopping/43 09-Nov-2013 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following

More information

INVITATION FOR QUOTATION. TEQIP-III/2018/iiit/Shopping/57/5182. Sub: Invitation for Quotations for supply of Laboratory Equipment.

INVITATION FOR QUOTATION. TEQIP-III/2018/iiit/Shopping/57/5182. Sub: Invitation for Quotations for supply of Laboratory Equipment. INVITATION FOR QUOTATION TEQIP-III/2018/iiit/Shopping/57/5182 11-Jan-2019 To, ------------------------------------- ------------------------------------- ------------------------------------- Sub: Invitation

More information

INVITATION FOR QUOTATION. TEQIP-III/2018/uiej/Shopping/23

INVITATION FOR QUOTATION. TEQIP-III/2018/uiej/Shopping/23 INVITATION FOR QUOTATION TEQIP-III/2018/uiej/Shopping/23 03-May-2018 To, --------- ----------- Sub: Invitation for Quotations for supply of Goods for Control System Lab Dear Sir, 1. You are invited to

More information

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/39

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/39 INVITATION FOR QUOTATION TEQIP-II/2013/UP1G01/Shopping/39 26-Jul-2013 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following

More information

INVITATION FOR QUOTATION

INVITATION FOR QUOTATION INVITATION FOR QUOTATION TEQIP-III/2018/mnitj/Shopping/14 23-Jan-2018 To,.... Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for

More information

INVITATION FOR QUOTATION. TEQIP-II/2015/UP1G01/Shopping/60

INVITATION FOR QUOTATION. TEQIP-II/2015/UP1G01/Shopping/60 INVITATION FOR QUOTATION TEQIP-II/2015/UP1G01/Shopping/60 24-Jul-2015 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following

More information

E-5 PROCUREMENT OF GOODS UNDER NATIONAL SHOPPING PROCEDURES

E-5 PROCUREMENT OF GOODS UNDER NATIONAL SHOPPING PROCEDURES E-5 PROCUREMENT OF GOODS UNDER NATIONAL SHOPPING PROCEDURES (For Contracts valued less than the equivalent of US $30,000 each) INVITATION FOR QUOTATIONS FOR SUPPLY OF EQUIPMENT UNDER NATIONAL SHOPPING

More information

PROCUREMENT OF GOODS UNDER OPEN TENDER PROCEDURE

PROCUREMENT OF GOODS UNDER OPEN TENDER PROCEDURE IFB NO. KGEC/DST-WB/EE /2018-19/995 PROCUREMENT OF GOODS UNDER OPEN TENDER PROCEDURE Kalyani Government Engineering College Kalyani 741 235; Nadia, West Bengal 1 Government of West Bengal Office of the

More information

Item Name & Package Code Specifications Quantity Last Date & Time of Submission of Quotation

Item Name & Package Code Specifications Quantity Last Date & Time of Submission of Quotation Quotation should be addressed to the Registrar, HBTU, Kanpur, Uttar Pradesh-208002. The envelope should be super scribed with Quotation for TEQIP-III, Package Name (As Applicable). Quotation are invited

More information

SCR Triggering Techniques Scientech 2703

SCR Triggering Techniques Scientech 2703 SCR Triggering Techniques Scientech 2703 Learning Material Ver 1.1 An ISO 9001:2008 company Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore - 452 010 India, + 91-731 4211100,

More information

Indian Institute of Information Technology, Design and Manufacturing, Kurnool (IIITDM Kancheepuram Campus) Chennai Tender Document.

Indian Institute of Information Technology, Design and Manufacturing, Kurnool (IIITDM Kancheepuram Campus) Chennai Tender Document. Indian Institute of Information Technology, Design and Manufacturing, Kurnool (IIITDM Kancheepuram Campus) Chennai 600 127 Tender Document For Supply and Installation of Electronic Drives Lab Equipment

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 SCR Triggering Techniques ST2703 Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643

More information

ELECTRIC DRIVE LAB Laboratory Manual

ELECTRIC DRIVE LAB Laboratory Manual DEV BHOOMI INSTITUTE OF TECHNOLOGY CHAKRATA ROAD, NAVGAOUN MANDUWALA, UTTARAKHAND Programs: B.TECH. (Electrical and Electronics Engineering) ELECTRIC DRIVE LAB Laboratory Manual PREPARED BY ASHISH KUKRETI,

More information

S.J.P.N Trust's. Hirasugar Institute of Technology, Nidasoshi

S.J.P.N Trust's. Hirasugar Institute of Technology, Nidasoshi S.J.P.N Trust's Hirasugar Institute of Technology, Nidasoshi Inculcating Values, Promoting Prosperity Approved by AICTE New Delhi, Recognized by Govt. of Karnataka and Affiliated to VTU Belagavi Tq: Hukkeri

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 UJT Characteristics Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail : info@scientech.bz

More information

National Infotech. Electrical Drive Trainers. Developed By: : Authorized Dealer : Embedded System Solutions

National Infotech. Electrical Drive Trainers. Developed By: : Authorized Dealer : Embedded System Solutions National Infotech A way to Power Electronics and Embedded System Solutions Electrical Drive Trainers In every industry there are industrial processes where electrical motors are used as a part of process

More information

INDUSTRIAL AUTOMATION

INDUSTRIAL AUTOMATION Department of Technical Education DIPLOMA COURSE IN ELECTRONICS AND COMMUNICATION ENGINEERING 1 SL.No 1 INDUSTRIAL AUTOMATION Subject Title : INDUSTRIAL AUTOMATION Subject Code : EC Hours Per Week : 04

More information

( ) ON s inductance of 10 mh. The motor draws an average current of 20A at a constant back emf of 80 V, under steady state.

( ) ON s inductance of 10 mh. The motor draws an average current of 20A at a constant back emf of 80 V, under steady state. 1991 1.12 The operating state that distinguishes a silicon controlled rectifier (SCR) from a diode is (a) forward conduction state (b) forward blocking state (c) reverse conduction state (d) reverse blocking

More information

PE Electrical Machine / Power Electronics. Power Electronics Training System. ufeatures. } List of Experiments

PE Electrical Machine / Power Electronics. Power Electronics Training System. ufeatures. } List of Experiments Electrical Machine / Power Electronics PE-5000 Power Electronics Training System The PE-5000 Power Electronics Training System consists of 28 experimental modules, a three-phase squirrel cage motor, load,

More information

TECHNICAL SPECIFICATIONS FOR BOLT HEATING EQUIPMENT

TECHNICAL SPECIFICATIONS FOR BOLT HEATING EQUIPMENT III IV. Annexure-1 TECHNICAL SPECIFICATIONS FOR BOLT HEATING EQUIPMENT I- INPUT & OUTPDUT Rated Power : 95 / 125 KVA at 50% duty cycle. Primary Voltage : 415V, 2 Phase, 50 Hz Secondary Voltage : 12.5 Volts

More information

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: POWER ELECTRONICS (COURSE CODE: 3350903) Diploma Programme in which this course is offered Semester in which offered

More information

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION Sem / Branch : V /EIE Subject code /Title: EI2301/Industrial Electronics UNIT-1 POWER DEVICES 1. What are the different methods

More information

Electrical And Electronics Engg

Electrical And Electronics Engg Electrical And Electronics Engg Rectifier Cubical panel type Voltage 3Ph 440V /(0-300V) DC 3Ph Isolation transformer-20kva Thyristor rating Current -300A/PIV - 1500V over load protection and necessary

More information

DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING

DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Power Diode EE2301 POWER ELECTRONICS UNIT I POWER SEMICONDUCTOR DEVICES PART A 1. What is meant by fast recovery

More information

UNIVERSITY QUESTIONS. Unit-1 Introduction to Power Electronics

UNIVERSITY QUESTIONS. Unit-1 Introduction to Power Electronics UNIVERSITY QUESTIONS Unit-1 Introduction to Power Electronics 1. Give the symbol and characteristic features of the following devices. (i) SCR (ii) GTO (iii) TRIAC (iv) IGBT (v) SIT (June 2012) 2. What

More information

POWER ELECTRONICS. Alpha. Science International Ltd. S.C. Tripathy. Oxford, U.K.

POWER ELECTRONICS. Alpha. Science International Ltd. S.C. Tripathy. Oxford, U.K. POWER ELECTRONICS S.C. Tripathy Alpha Science International Ltd. Oxford, U.K. Contents Preface vii 1. SEMICONDUCTOR DIODE THEORY 1.1 1.1 Introduction 1.1 1.2 Charge Densities in a Doped Semiconductor 1.1

More information

NATIONAL POWER TRAINING INSTITUTE (WR) (Ministry of Power, Govt. of India) NAGPUR TENDER DOCUMENT SUPPLY OF DRAWING TABLES AND STOOLS

NATIONAL POWER TRAINING INSTITUTE (WR) (Ministry of Power, Govt. of India) NAGPUR TENDER DOCUMENT SUPPLY OF DRAWING TABLES AND STOOLS NATIONAL POWER TRAINING INSTITUTE (WR) (Ministry of Power, Govt. of India) NAGPUR-440022 TENDER DOCUMENT SUPPLY OF DRAWING TABLES AND STOOLS At NPTI (WR), NAGPUR, MAHARASHTRA 1 NATIONAL POWER TRAINING

More information

11. Define the term pinch off voltage of MOSFET. (May/June 2012)

11. Define the term pinch off voltage of MOSFET. (May/June 2012) Subject Code : EE6503 Branch : EEE Subject Name : Power Electronics Year/Sem. : III /V Unit - I PART-A 1. State the advantages of IGBT over MOSFET. (Nov/Dec 2008) 2. What is the function of snubber circuit?

More information

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad I INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad-000 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING TUTORIAL QUESTION BANK Course Name : POWER ELECTRONICS Course Code : AEE0

More information

Conventional Paper-II-2013

Conventional Paper-II-2013 1. All parts carry equal marks Conventional Paper-II-013 (a) (d) A 0V DC shunt motor takes 0A at full load running at 500 rpm. The armature resistance is 0.4Ω and shunt field resistance of 176Ω. The machine

More information

10ECL78-Power Electronics Lab

10ECL78-Power Electronics Lab Circuit Diagram-1: Circuit Diagram-2: To find the Latching Current: Dept. of ECE, CIT, Gubbi Page No. 1 Experiment No. 1 a) Static Characteristics of SCR Static Characteristics of SCR and DIAC Date: /

More information

Power Electronics (Sample Questions) Module-1

Power Electronics (Sample Questions) Module-1 Module-1 Short Questions (Previous Years BPUT Questions 1 to 18) 1. What are the conditions for a thyristor to conduct? di 2. What is the common method used for protection? dt 3. What is the importance

More information

POWER ELECTRONICS LAB MANUAL

POWER ELECTRONICS LAB MANUAL JIS College of Engineering (An Autonomous Institution) Department of Electrical Engineering POWER ELECTRONICS LAB MANUAL Exp-1. Study of characteristics of an SCR AIM: To obtain the V-I characteristics

More information

R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification:

R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification: DIGITAL IC TRAINER Model : DE-150 Object: To Study the Operation of Digital Logic ICs TTL and CMOS. To Study the All Gates, Flip-Flops, Counters etc. To Study the both the basic and advance digital electronics

More information

Deficiency (R - A) Sl. No. (A) (R) 7. Pspice / Matlab /other Equivalent software Package) with PC Single Phase Wattmeter

Deficiency (R - A) Sl. No. (A) (R) 7. Pspice / Matlab /other Equivalent software Package) with PC Single Phase Wattmeter (R 03) Semester II EE6 Electric Circuits Laboratory.. 3. 4. 5. 6. Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (0 MHz). Digital Storage Oscilloscope

More information

UNIVERSITY OF CALICUT (INSTITUTE OF ENGINEERING AND TECHNOLOGY) IET/A/EE/Purchase/2009. Thenhipalam P.O. Dated

UNIVERSITY OF CALICUT (INSTITUTE OF ENGINEERING AND TECHNOLOGY) IET/A/EE/Purchase/2009. Thenhipalam P.O. Dated UNIVERSITY OF CALICUT (INSTITUTE OF ENGINEERING AND TECHNOLOGY) IET/A/EE/Purchase/2009. Thenhipalam P.O. Dated. 03-02-20. TENDER NOTICE Sl. No Sealed competitive tenders are invited for the supply of the

More information

L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G

L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G P R O F. S L A C K L E C T U R E R, E L E C T R I C A L A N D M I C R O E L E C T R O N I C E N G I N E E R I N G G B S E E E @ R I T. E D U B L D I N G 9, O F F I C E 0 9-3 1 8 9 ( 5 8 5 ) 4 7 5-5 1 0

More information

Power Electronics (BEG335EC )

Power Electronics (BEG335EC ) 1 Power Electronics (BEG335EC ) 2 PURWANCHAL UNIVERSITY V SEMESTER FINAL EXAMINATION - 2003 The figures in margin indicate full marks. Attempt any FIVE questions. Q. [1] [a] A single phase full converter

More information

Y-0035 POWER ELECTRONICS TRAINING SET

Y-0035 POWER ELECTRONICS TRAINING SET The Power Electronics Training Set is designed in modular structure to do the applications of basic Power Electronics, industrial automation studying and using the control and measuring of the electrical

More information

Name of chapter & details

Name of chapter & details Course Title Course Code Power Electronics-I EL509 Lecture : 03 / 03 Course Credit / Hours Practical : 01 / 02 Tutorial : 00 / 00 Course Learning Outcomes Total : 04 / 05 At the end of the session student

More information

International Journal of Advance Engineering and Research Development

International Journal of Advance Engineering and Research Development Scientific Journal of Impact Factor (SJIF): 3.134 International Journal of Advance Engineering and Research Development Volume 3, Issue 1, January -2016 e-issn (O): 2348-4470 p-issn (P): 2348-6406 CLOSED

More information

NOTICE INVITING TENDER Limited Tender on Single Bid Basis Milling Cutters. Tender Enquiry No: Due Date:

NOTICE INVITING TENDER Limited Tender on Single Bid Basis Milling Cutters. Tender Enquiry No: Due Date: SCOOTERS INDIA LIMITED Sarojini Nagar, Lucknow - 226008 (Phones: 0522-2476090, 2476242 (Exchange) Direct: 0522-2476139) Fax: 91-522-2476190 Email: materials@scoootersindia.com NOTICE INVITING TENDER Limited

More information

ELECTRONIC CONTROL OF A.C. MOTORS

ELECTRONIC CONTROL OF A.C. MOTORS CONTENTS C H A P T E R46 Learning Objectives es Classes of Electronic AC Drives Variable Frequency Speed Control of a SCIM Variable Voltage Speed Control of a SCIM Chopper Speed Control of a WRIM Electronic

More information

Application Note AN-3006 Optically Isolated Phase Controlling Circuit Solution

Application Note AN-3006 Optically Isolated Phase Controlling Circuit Solution www.fairchildsemi.com Application Note AN-3006 Optically Isolated Phase Controlling Circuit Solution Introduction Optocouplers simplify logic isolation from the ac line, power supply transformations, and

More information

6. Explain control characteristics of GTO, MCT, SITH with the help of waveforms and circuit diagrams.

6. Explain control characteristics of GTO, MCT, SITH with the help of waveforms and circuit diagrams. POWER ELECTRONICS QUESTION BANK Unit 1: Introduction 1. Explain the control characteristics of SCR and GTO with circuit diagrams, and waveforms of control signal and output voltage. 2. Explain the different

More information

Electricity and Electronics Constructor Kits

Electricity and Electronics Constructor Kits EEC470 Series The Electricity and Electronics Constructor EEC470 series is a structured practical training programme comprising an unpowered construction deck (EEC470) and a set of educational kits. Each

More information

ELG3336: Power Electronics Systems Objective To Realize and Design Various Power Supplies and Motor Drives!

ELG3336: Power Electronics Systems Objective To Realize and Design Various Power Supplies and Motor Drives! ELG3336: Power Electronics Systems Objective To Realize and Design arious Power Supplies and Motor Drives! Power electronics refers to control and conversion of electrical power by power semiconductor

More information

DEPARTMENT OF ARCHITECTURE

DEPARTMENT OF ARCHITECTURE DEPARTMENT OF ARCHITECTURE Web : www.nitt.edu Phone : 0431-2503001 Short Tender Notification No.: NITT/ARCH/04/2012/ DRAWING TABLE Dated : 19-04 -2012 (Retender Those previously quoted for this tender

More information

GOVERNMENT POLYTECHNIC, KHAMGAON QUOTATION

GOVERNMENT POLYTECHNIC, KHAMGAON QUOTATION GOVERNMENT POLYTECHNIC, KHAMGAON WINNER OF ISTE-NARSEE-MONJEE AWARD-2000 (07263) 56644 (O), 54609 (R), Fax - (07263) 52278 E-mail: gpolykhamgaon@rediffmail.com Gram: - POLYTECH No. : GPK/EQP/inst purchase/etx_list-a/2018-19/3256

More information

Lecture 19 - Single-phase square-wave inverter

Lecture 19 - Single-phase square-wave inverter Lecture 19 - Single-phase square-wave inverter 1. Introduction Inverter circuits supply AC voltage or current to a load from a DC supply. A DC source, often obtained from an AC-DC rectifier, is converted

More information

2.1 Performance Standards The UPS is designed with the applicable sections of UL, CUL, and ISO The UPS has UL and CUL listing.

2.1 Performance Standards The UPS is designed with the applicable sections of UL, CUL, and ISO The UPS has UL and CUL listing. 1.0 Scope This document describes the specification for Toshiba 1000 Series On-Line Uninterruptible Power System (UPS). The UPS will supply a computer grade AC output sine wave which is unaffected by the

More information

TOSHIBA International Corp

TOSHIBA International Corp TOSHIBA International Corp GUIDE SPECIFICATIONS THREE PHASE UNINTERRUPTIBLE POWER SYSTEM TOSHIBA 4200FA 30 kva CT Internal Battery UPS GUIDE SPECIFICATIONS 1 (30 kva CT) 1.0 SCOPE 1.1 System This specification

More information

PROCUREMENT OF SERVO CONTROLLED VOLTAGE STABILIZER FOR STPI-NASIK

PROCUREMENT OF SERVO CONTROLLED VOLTAGE STABILIZER FOR STPI-NASIK PROCUREMENT OF SERVO CONTROLLED VOLTAGE STABILIZER FOR STPI-NASIK Sealed quotations are invited under Two-Bid system from reputed agencies, either by themselves or as a joint venture/consortium/partnership

More information

Calhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics

Calhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics Calhoon MEBA Engineering School Study Guide for Proficiency Testing Industrial Electronics January 0. Which factors affect the end-to-end resistance of a metallic conductor?. A waveform shows three complete

More information

(a) average output voltage (b) average output current (c) average and rms values of SCR current and (d) input power factor. [16]

(a) average output voltage (b) average output current (c) average and rms values of SCR current and (d) input power factor. [16] Code No: 07A50204 R07 Set No. 2 1. A single phase fully controlled bridge converter is operated from 230 v, 50 Hz source. The load consists of 10Ω and a large inductance so as to reach the load current

More information

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLY Mamallapuram chennai

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLY Mamallapuram chennai DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLY Mamallapuram chennai DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK V SEMESTER EE6503 - POWER ELECTRONICS Regulation 2013

More information

International Journal of Advance Engineering and Research Development

International Journal of Advance Engineering and Research Development Scientific Journal of Impact Factor (SJIF): 3.134 International Journal of Advance Engineering and Research Development Volume 3, Issue 1, January -2016 e-issn (O): 2348-4470 p-issn (P): 2348-6406 Design

More information

Invitation of quotation for Camera At All India Institute of Medical Sciences, Jodhpur

Invitation of quotation for Camera At All India Institute of Medical Sciences, Jodhpur Invitation of quotation for Camera At All India Institute of Medical Sciences, Jodhpur Inquiry No.: : Admin/Gen/16-02(ii)/2017-AIIMS.JDH Inquiry Issue Date : 20 th May, 2017 Last Date of Submission : 26

More information

Design and Simulation of Synchronous Buck Converter for Microprocessor Applications

Design and Simulation of Synchronous Buck Converter for Microprocessor Applications Design and Simulation of Synchronous Buck Converter for Microprocessor Applications Lakshmi M Shankreppagol 1 1 Department of EEE, SDMCET,Dharwad, India Abstract: The power requirements for the microprocessor

More information

UNIT-III STATOR SIDE CONTROLLED INDUCTION MOTOR DRIVE

UNIT-III STATOR SIDE CONTROLLED INDUCTION MOTOR DRIVE UNIT-III STATOR SIDE CONTROLLED INDUCTION MOTOR DRIVE 3.1 STATOR VOLTAGE CONTROL The induction motor 'speed can be controlled by varying the stator voltage. This method of speed control is known as stator

More information

POWER ELECTRONICS LAB

POWER ELECTRONICS LAB MUFFAKHAM JAH COLLEGE OF ENGINEERING & TECHNOLOGY Banjara Hills Road No 3, Hyderabad 34 www.mjcollege.ac.in DEPARTMENT OF ELECTRICAL ENGINEERING LABORATORY MANUAL POWER ELECTRONICS LAB For B.E. III/IV

More information

[Corporate Communications Department] Notice Inviting Tender

[Corporate Communications Department] Notice Inviting Tender [Corporate Communications Department] Notice Inviting Tender Tender Ref: CorpComm/GreetingCardPrinting/2017 Tender Date: 26.10.2016 Last Date for Tender Submission: 07.11.2016 Balmer Lawrie & Co. Ltd.

More information

PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES MICROTECH INDUSTRIES

PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES MICROTECH INDUSTRIES PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES µ MICROTECH INDUSTRIES 14A/ 1G, ULTADANGA ROAD GOPAL BHAVAN KOLKATA 700 004 Phone : (033) 3296 9273, Cell : 98312 63293 E- mail : hkg@cal3.vsnl.net.in

More information

2016, IRJET Impact Factor value: 4.45 Page 2444

2016, IRJET Impact Factor value: 4.45 Page 2444 CYCLOCONVERTER TO CONTROL SPEED OF INDUCTION MOTOR Bhagawati Patil 1,Rushali Aute 2, Pramila Mhaske 3,Nitin Patil 4 Department of Electronics And Telecommunication (SITRC) Nashik Savitribai Phule Pune

More information

HEM ELECTRONIQUES,C-46, M.I.D.C, MIRAJ POWER ELECTRONICS LABORATORY:PE

HEM ELECTRONIQUES,C-46, M.I.D.C, MIRAJ POWER ELECTRONICS LABORATORY:PE POWER ELECTRONICS LABORATORY:PE 1.STUDY OF SCR/MOSFET/IGBT/TRIAC/DIAC CHARACTERISTICS (PE-1) The set up comes in to parts with provision for high voltage variable power supply (0 to 500 volts), 0 to 10

More information

Conventional Paper-II-2011 Part-1A

Conventional Paper-II-2011 Part-1A Conventional Paper-II-2011 Part-1A 1(a) (b) (c) (d) (e) (f) (g) (h) The purpose of providing dummy coils in the armature of a DC machine is to: (A) Increase voltage induced (B) Decrease the armature resistance

More information

Indian Institute of Information Technology, Pune

Indian Institute of Information Technology, Pune Indian Institute of Information Technology, Pune Reference No: IIIT Pune/Enquiry/2019/474 DATE: 16-01-2019 CALL FOR QUOTATIONS for Procurement of Equipments/setups for Microwave Lab and Communication Lab

More information

QUOTATION. Procurement of Equipments for Physics Laboratory

QUOTATION. Procurement of Equipments for Physics Laboratory Notification No.: NITPY/PHY/LAB/Q-0/014-15 31.1.014 QUOTATION Procurement of Equipments for Physics Laboratory National Institute of Technology Puducherry invites sealed quotations from the reputed vendors/manufacturers

More information

SI.No Parameters CPRI Specification/Requirements To be Completed by the Bidder Guaranteed Technical

SI.No Parameters CPRI Specification/Requirements To be Completed by the Bidder Guaranteed Technical Section II Technical Specifications Tender enquiry no. : STDS/12-1/2016-17/PUR/STL/A-1849 Name of the equipment : SPECIFICATIONS OF SYSTEM FOR CONDUCTING DETERMINATION OF ERRORS TEST ON INSTRUMENT TRANSFORMERS

More information

DLVP A OPERATOR S MANUAL

DLVP A OPERATOR S MANUAL DLVP-50-300-3000A OPERATOR S MANUAL DYNALOAD DIVISION 36 NEWBURGH RD. HACKETTSTOWN, NJ 07840 PHONE (908) 850-5088 FAX (908) 908-0679 TABLE OF CONTENTS INTRODUCTION...3 SPECIFICATIONS...5 MODE SELECTOR

More information

Microprocessor Control Board Set Up Procedures (OR PLC)

Microprocessor Control Board Set Up Procedures (OR PLC) Microprocessor Control Board Set Up Procedures (OR-00 PLC) SWITCHES/PUSHBUTTONS Push Buttons at display SW Enter button SW Back button SW Down SW UP Back light on/off switch Rotary switches on main board

More information

[Corporate Communications Department] Notice Inviting Tender

[Corporate Communications Department] Notice Inviting Tender [Corporate Communications Department] Notice Inviting Tender Tender Ref: CorpComm/GreetingCardPrinting/2018 Tender Date: 22.11.2017 Last Date for Tender Submission: 28.11.2017 Balmer Lawrie & Co. Ltd.

More information

Design and Implementation of AT Mega 328 microcontroller based firing control for a tri-phase thyristor control rectifier

Design and Implementation of AT Mega 328 microcontroller based firing control for a tri-phase thyristor control rectifier Design and Implementation of AT Mega 328 microcontroller based firing control for a tri-phase thyristor control rectifier 1 Mr. Gangul M.R PG Student WIT, Solapur 2 Mr. G.P Jain Assistant Professor WIT,

More information

BASIC ELECTRICAL LAB EQUIPMENTS

BASIC ELECTRICAL LAB EQUIPMENTS BASIC ELECTRICAL LAB EQUIPMENTS S No. Name of the Equipment Qty Model/Specification Superposition theorem kit(s) 0 Jupiter Norton's theorem kit(s) 0 Jupiter 3 Thevenin theorem kit(s) 0 Jupiter 4 Maximum

More information

M.D. Singh J.G. Joshi MECHATRONICS

M.D. Singh J.G. Joshi MECHATRONICS M.D. Singh J.G. Joshi MECHATRONICS MECHATRONICS MECHATRONICS M.D. SINGH Formerly Principal Sagar Institute of Technology and Research Bhopal J.G. JOSHI Lecturer Department of Electronics and Telecommunication

More information

13. DC to AC Converters

13. DC to AC Converters 13. DC to AC Converters Inverters Inverter is a device which converts DC voltages (or current) to AC voltages (or current).inverter converting voltage is called VOLTAGE SOURCE INVERTER (VSI), while inverter

More information

cq Ftdllf ~ ret ~q ret ~:II crill. Indian Maritime University

cq Ftdllf ~ ret ~q ret ~:II crill. Indian Maritime University cq Ftdllf ~ ret ~q ret ~:II crill. Indian Maritime University (~ ~~OI~~ Iclll, 'iffio mefir I A Central University, Govt. of India) Cfllcl(f)ldl ~ I Kolkata Campus No. IMU-KC/Laboratory Equipmentll7-18

More information

CHAPTER 6 THREE-LEVEL INVERTER WITH LC FILTER

CHAPTER 6 THREE-LEVEL INVERTER WITH LC FILTER 97 CHAPTER 6 THREE-LEVEL INVERTER WITH LC FILTER 6.1 INTRODUCTION Multi level inverters are proven to be an ideal technique for improving the voltage and current profile to closely match with the sinusoidal

More information

Acknowledgments Introduction

Acknowledgments Introduction Acknowledgments Introduction xiii xi 1 Electronic meters 1 1.1 Digital meters 2 1.2 Nondigital (analog) meters 6 1.3 Differential meters 14 1.4 Digital meter displays and ranges 16 1.5 Nondigital meter

More information

ELG4139: Power Electronics Systems Objective To Realize and Design Various Power Supplies and Motor Drives!

ELG4139: Power Electronics Systems Objective To Realize and Design Various Power Supplies and Motor Drives! ELG4139: Power Electronics Systems Objective To Realize and Design Various Power Supplies and Motor Drives! Power electronics refers to control and conversion of electrical power by power semiconductor

More information

Type of loads Active load torque: - Passive load torque :-

Type of loads Active load torque: - Passive load torque :- Type of loads Active load torque: - Active torques continues to act in the same direction irrespective of the direction of the drive. e.g. gravitational force or deformation in elastic bodies. Passive

More information

On the last years there have been significant improvements on this technology sector.

On the last years there have been significant improvements on this technology sector. INTRODUCTION Technological development in the electronic field has transformed power electronics from static conversion technology to its essential element in the electrical and electronic area. Its aim

More information

Design Ac Dc Voltage Regulator Using Scr Pdf

Design Ac Dc Voltage Regulator Using Scr Pdf Design Ac Dc Voltage Regulator Using Scr Pdf Design, construct and test a DC voltage regulator using SCR. Capture and display the The bridge rectifier converts incoming ac signal to unidirectional wave.

More information

Enquiry Generation Details

Enquiry Generation Details Enquiry Generation Details Page 1 of 4 ल म अन स ध न स थ न INSTITUTE FOR PLASMA RESEARCH परम ण ऊज वभ ग, भ रत सरक र क एक सह यत त स थ न An Aided Institute of Department of Atomic Energy, Government of India

More information

Tender Ref: ELCOT/Proc/OT/32954/Multimedia Projectors/

Tender Ref: ELCOT/Proc/OT/32954/Multimedia Projectors/ Tender Ref: ELCOT/Proc/OT/32954/Multimedia Projectors/2017-18 Electronics Corporation of Tamil Nadu Limited Rate Contract Tender S u p p l y, i n s t a l l a t i o n a n d c o m m i s s i o n i n g o f

More information

Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit

Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Contents p. v Preface p. ix Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Analysis p. 16 MultiSIM Lab

More information

S11 Adjustable Speed Drive Engineering Specification

S11 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National

More information

POWER ELECTRONICSAND SIMULATION LAB 3 rd YEAR-II SEMESTER

POWER ELECTRONICSAND SIMULATION LAB 3 rd YEAR-II SEMESTER POWER ELECTRONICSAND SIMULATION LAB 3 rd YEAR-II SEMESTER NAME OF THE STUDENT : REGISTERNUMBER : YEAR/ SEMESTER : STAFF INCHARGE : Mr. G.SRIDHAR BABU Assoc.Prof/EEE 1 General Instructions to students for

More information

PULSE CONTROLLED INVERTER

PULSE CONTROLLED INVERTER APPLICATION NOTE PULSE CONTROLLED INVERTER by J. M. Bourgeois ABSTRACT With the development of insulated gate transistors, interfacing digital control with a power inverter is becoming easier and less

More information

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING POWER ELECTRONICS LABORATORY LAB MANUAL 10ECL VII SEMESTER

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING POWER ELECTRONICS LABORATORY LAB MANUAL 10ECL VII SEMESTER APPROVED BY AICTE NEW DELHI, AFFILIATED TO VTU BELGAUM DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING & POWER ELECTRONICS LABORATORY LAB MANUAL 10ECL78 2016-2017 VII SEMESTER Prepared by: Reviewed

More information

CHAPTER 4 MODIFIED H- BRIDGE MULTILEVEL INVERTER USING MPD-SPWM TECHNIQUE

CHAPTER 4 MODIFIED H- BRIDGE MULTILEVEL INVERTER USING MPD-SPWM TECHNIQUE 58 CHAPTER 4 MODIFIED H- BRIDGE MULTILEVEL INVERTER USING MPD-SPWM TECHNIQUE 4.1 INTRODUCTION Conventional voltage source inverter requires high switching frequency PWM technique to obtain a quality output

More information

International Journal of Advance Engineering and Research Development

International Journal of Advance Engineering and Research Development Scientific Journal of Impact Factor (SJIF): 4.14 International Journal of Advance Engineering and Research Development Volume 3, Issue 10, October -2016 e-issn (O): 2348-4470 p-issn (P): 2348-6406 Single

More information

SSM INSTITUTE OF ENGINEERING AND TECHNOLOGY DINDIGUL PALANI HIGH WAY, SINTHALAGUNDU POST DINDIGUL

SSM INSTITUTE OF ENGINEERING AND TECHNOLOGY DINDIGUL PALANI HIGH WAY, SINTHALAGUNDU POST DINDIGUL SSM INSTITUTE OF ENGINEERING AND TECHNOLOGY DINDIGUL PALANI HIGH WAY, SINTHALAGUNDU POST DINDIGUL 624002 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING LABORATORY MANUAL CLASS : III rd YEAR EEE SEMESTER

More information

Speed Control Of Transformer Cooler Control By Using PWM

Speed Control Of Transformer Cooler Control By Using PWM Speed Control Of Transformer Cooler Control By Using PWM Bhushan Rakhonde 1, Santosh V. Shinde 2, Swapnil R. Unhone 3 1 (assistant professor,department Electrical Egg.(E&P), Des s Coet / S.G.B.A.University,

More information

Department of Mechatronics Engineering

Department of Mechatronics Engineering Department of Mechatronics Engineering COURSES COVERED CONTROL SYSTEM POWER ELECTRONICS ELECTROMECHANICAL SYSTEM SENSORS AND INTRUMENTATION LAB SUPERVISOR: ENGR. MOEZ UL HASSAN NI ELVIS II The NI Educational

More information

Literature Review. Chapter 2

Literature Review. Chapter 2 Chapter 2 Literature Review Research has been carried out in two ways one is on the track of an AC-AC converter and other is on track of an AC-DC converter. Researchers have worked in AC-AC conversion

More information