Operating Manual Ver.1.1

Size: px
Start display at page:

Download "Operating Manual Ver.1.1"

Transcription

1 SSB Modulator and Demodulator Operating Manual Ver.1.1 An ISO 9001 : 2000 company , Electronic Complex Pardesipura, Indore , India Tel : /02, Fax: e mail : info@scientech.bz Website : Toll free :

2 Scientech Technologies Pvt. Ltd. 2

3 SSB Modulator & Demodulator AB102 Table of Contents 1. Introduction 4 2. Theory 6 3. Experiments Experiment 1 9 To study single sideband AM modulation Experiment 2 11 To study single sideband AM demodulation 4. Warranty List of Accessories 13 RoHS Compliance Scientech Products are RoHS Complied. RoHS Directive concerns with the restrictive use of Hazardous substances (Pb, Cd, Cr, Hg, Br compounds) in electric and electronic equipments. Scientech products are Lead Free and Environment Friendly. It is mandatory that service engineers use lead free solder wire and use the soldering irons upto (25 W) that reach a temperature of 450 C at the tip as the melting temperature of the unleaded solder is higher than the leaded solder. Scientech Technologies Pvt. Ltd. 3

4 Introduction AB102 is a compact, ready to use SSB Modulator & Demodulator Experiment board. This is useful for students to understand functionality of single sideband modulation and demodulation. It can be used with SCIENTECH Analog Lab ST2612 which has built in DC power supply, AC power supply, function generator, modulation generator, continuity tester, toggle switches, and potentiometer. List of Boards : Model Name AB01 Diode characteristics (Si, Zener, LED) AB02 Transistor characteristics (CB NPN) AB03 Transistor characteristics (CB PNP) AB04 Transistor characteristics (CE NPN) AB05 Transistor characteristics (CE PNP) AB06 Transistor characteristics (CC NPN) AB07 Transistor characteristics (CC PNP) AB08 FET characteristics AB09 Rectifier Circuits AB10 Wheatstone Bridge AB11 Maxwell s Bridge AB12 De Sauty s Bridge AB13 Schering Bridge AB15 Common Emitter Amplifier AB14 Darlington Pair AB16 Common Collector Amplifier AB17 Common Base Amplifier AB18 Cascode Amplifier AB19 RC-Coupled Amplifier AB20 Direct Coupled Amplifier AB21 Class A Amplifier AB22 Class B Amplifier (push pull emitter follower) AB23 Class C Tuned Amplifier AB25 Phase Locked Loop (FM Demodulator & Frequency Divider / Multiplier) AB28 Multivibrator ( Mono stable / Astable) AB29 F-V and V-F Converter AB30 V-I and I-V Converter AB31 Zener Voltage Regulator AB32 Transistor Series Voltage Regulator AB33 Transistor Shunt Voltage Regulator AB35 DC Ammeter AB39 Instrumentation Amplifier AB41 Differential Amplifier (Transistorized) AB42 Operational Amplifier (Inverting / Non-inverting / Differentiator) Scientech Technologies Pvt. Ltd. 4

5 AB43 AB44 AB45 AB49 AB51 AB52 AB54 AB56 AB57 AB58 AB59 AB64 AB65 AB66 AB67 AB68 AB80 AB82 AB83 AB84 AB85 AB88 AB89 AB90 AB91 AB92 AB93 AB96 AB97 AB101 AB106 Operational Amplifier (Adder/Scalar) Operational Amplifier (Integrator/ Differentiator) Schmitt Trigger and Comparator K Derived Filter Active filters (Low Pass and High Pass) Active Band Pass Filter Tschebyscheff Filter Fiber Optic Analog Link Owen s Bridge Anderson s Bridge Maxwell s Inductance Bridge RC Coupled Amplifier with Feedback Phase Shift Oscillator Wien Bridge Oscillators Colpitt Oscillator Hartley Oscillator RLC Series and RLC Parallel Resonance Thevenin s and Maximum power Transfer Theorem Reciprocity and Superposition Theorem Tellegen s Theorem Norton s theorem Diode Clipper Diode Clampers Two port network parameter Optical Transducer (Photovoltaic cell) Optical Transducer (Photoconductive cell/ldr) Optical Transducer (Phototransistor) Temperature Transducer (RTD & IC335) Temperature Transducer (Thermocouple) DSB Modulator and Demodulator FM Modulator and Demodulator and many more Scientech Technologies Pvt. Ltd. 5

6 Signal Side Band Transmission (SSB) : Theory Single sideband (SSB) AM is a radio communication technique in which the transmitter suppresses one sideband and therefore transmits only a single sideband. Or we can say that it is a refinement of the technique of amplitude modulation designed to be more efficient in its use of electrical power and bandwidth. Amplitude modulation typically produces a modulated output signal that has twice the bandwidth of the modulating signal, with a significant power component at the center carrier frequency. Single sideband modulation improves this.in single sideband; carrier is not transmitted so there is a reduction by 50% of the transmitted power i.e. - 3dBm. Because of SSB, only one sideband is transmitted, so there is a further reduction by 50% in transmitted power i.e. -3dBm (+) -3dBm = -6dBm. Finally, because only one sideband is received, the receiver s bandwidth is reduced by one half. Thus effectively reducing the required power by the Modulator is- 50% (-3dBm (+) -3dBm (+) -3dBm = -9dBm). If a demodulator bandwidth can be reduced by 50%: the needed transmitter power is also reduced by 50%, i.e., the demodulator Signal to Noise Ratio (SNR) is improved as the demodulator bandwidth is reduced. In SSB we transmit only one sideband as shown in figure 1. Figure 1 The bandwidth of an SSB system is equal to the range of frequencies present in the information waveform where as a DSB signal has a bandwidth twice as wide as the highest frequency component in the information signal. This also means a greatly reduced bandwidth for the system. In figures 1 we are transmitting just a single frequency. The SSB Modulator : The design of the SSB modulator is accomplished in two stages. First we generate a DSBSC signal and then remove the lower sideband to achieve the final SSB result. Scientech Technologies Pvt. Ltd. 6

7 Generating the DSBSC Signal : To do this, we use a balanced modulator. The principle of this circuit is shown in figure 2. Figure 2 Internally, the balanced modulator generates the AM waveform, which includes the carrier and both sidebands. It then offers the facility to feed a variable amount of the carrier back into the modulator in anti-phase to cancel the carrier output. In this way we can balance out the carrier to suppress it completely leaving just the required DSBSC waveform same as shown in fig 3. From DSBSC to SSB : Figure 3 The DSBSC signal consists of the two sidebands, one of which can be removed by passing them through a band pass filter. On the modulator this is achieved as shown in figure 4. Figure 4 Scientech Technologies Pvt. Ltd. 7

8 The inputs to the balanced modulator comprise the modulating signal, which extend from 300Hz to 3.4 KHz, and the carrier signal of frequency 450KHZ. A ceramic band pass filter (455KHZ) passes only a narrow range of frequencies with a sharp cut-off outside of its pass band. SSB Demodulator : We are using product detector to demodulate the single sideband modulated wave. Product Detector : A product detector is a demodulator which accepts a modulated wave and a carrier wave. The simplest form of product detector multiplies an incoming signal by its carrier with the same frequency and phase as the carrier of the incoming signal. This mixing process results in the generation of two new frequency components. 1. A component whose frequency is the sum of the two input frequencies : 2. A component whose frequency is the difference between the two input frequencies. A low-pass filter at the output of the product detector rejects all frequencies except the difference frequency. Consequently, any slight difference in frequency between the modulator output and carrier frequency will results audio frequency at the product detector's output. Advantages of product detector : 1. The product detector can decode over modulated AM, AM with suppressed carrier, and SSB in addition to regular AM. 2. A signal demodulated with a product detector will have a higher signal to noise ratio than the same signal demodulated with an envelope detector. Scientech Technologies Pvt. Ltd. 8

9 Objective : Experiment 1 To study Signal Sideband AM Generation. Apparatus required : 1. Analog board AB DC power supplies +12V and -12V from external source or ST2612 Analog Lab. 3. Oscilloscope 4. Function generator (ST4063) 5. 2 mm patch cords Circuit diagram : Circuit used to study single sideband modulation is shown in Fig 5. Procedure : Figure 5 Connect +12V and -12V dc power supplies at their indicated position from external source or ST2612 Analog Lab. 1. Apply sine wave of 450KHZ frequency and amplitude 600mV or 0.6Vpp approx at carrier signal socket. This is the carrier input to our balanced modulator. Check the carrier signal frequency (450KHZ) by frequency counter. Scientech Technologies Pvt. Ltd. 9

10 2. Apply sine wave of frequency ranging to 300 Hz to 3.4 KHz and amplitude 2V pp approx to modulating signal socket. This is the audio frequency sine wave, which will be as our modulating signal. 3. Monitor, in turn, the two inputs to the balanced modulator block, at tp1 and tp2. 4. Next, examine the output of the balanced modulator block at tp3. 5. Turn the balance pot P1, on the board. It is this block that we will use to perform double-side band amplitude modulation. Check that the waveform at tp3 as shown in fig 6. Figure 6 Note that it may be necessary to adjust the balanced modulator block's balance pot, in order to ensure that the peaks of TP.3 waveform envelope (labeled A, B, C etc. in the above diagram) all have equal amplitude. 6. The DSBSC output from the balanced modulator block is next passed on to the ceramic filter block. Observe the output of the ceramic band pass filter block at tp4 together with the audio modulating signal at TP.2. Note that the envelope of the signal at TP. 4 now has fairly constant amplitude, as shown in figure 7. Figure 7 7. Next, vary the amplitude (0V to 2.4V) and frequency (300HZ to 3.4KHZ) of modulating signal throughout its range, and observe the output at tp 4. Observe this change also on frequency counter. This highlights one of the main advantages of SSB amplitude modulation if there is no modulating signal, and then the amplitude of the SSB waveform drops to zero, so that no power is wasted. 8. Return the amplitude pot to its original position. Scientech Technologies Pvt. Ltd. 10

11 Objective : Experiment 2 To study Single Sideband AM Reception. Apparatus required : 1. Analog board AB DC power supplies +12V and -12V from external source or ST2612 Analog Lab. 3. Oscilloscope 4. Function generator (ST4063) 5. 2 mm patch cords Circuit diagram : Circuit used to investigate demodulation of the single sideband amplitude modulated waveform is shown in Fig 8. Figure 8 Scientech Technologies Pvt. Ltd. 11

12 Procedure : Connect +12V and -12V dc power supplies at their indicated position from external source or ST2612 Analog Lab. 1. Examine the Modulator output signal at TP 4, is a SSB waveform, by checking that the signal is a reasonably good sine wave. 2. Apply carrier signal to the product detector block by connecting 2 mm patch between carrier signal of modulator and demodulator block. 3. Connect 2 mm patch cord between SSB output and SSB Input socket. 4. Monitor, in turn the two inputs of product detector block, at tp5 and tp6. 5. Set 3.4KHZ modulating frequency by function generator. 6. Next, examine the output of product detector block, at SSB demodulated output socket. 7. Vary the amplitude of output wave by varying potentiometer P2 and P3. Potentiometer P2 is used to set magnitude of carrier wave and potentiometer P3 is used to set magnitude of SSB wave. Now, vary the amplitude (0V to 2.4V) and frequency (300HZ to 3.4KHZ) of modulating signal throughout its range, and observe the output at tp7. Note that the frequency of the modulating signal changes, the output from the product detector should follow it. Scientech Technologies Pvt. Ltd. 12

13 Warranty 1. We guarantee the product against all manufacturing defects for 24 months from the date of sale by us or through our dealers. Consumables like dry cell etc. are not covered under warranty. 2. The guarantee will become void, if a) The product is not operated as per the instruction given in the operating manual. b) The agreed payment terms and other conditions of sale are not followed. c) The customer resells the instrument to another party. d) Any attempt is made to service and modify the instrument. 3. The non-working of the product is to be communicated to us immediately giving full details of the complaints and defects noticed specifically mentioning the type, serial number of the product and date of purchase etc. 4. The repair work will be carried out, provided the product is dispatched securely packed and insured. The transportation charges shall be borne by the customer. For any Technical Problem Please Contact us at List of Accessories 1. 2mm Patch cord (Red) Nos. 2. 2mm Patch cord (Black) Nos. 3. 2mm Patch cord (Blue) Nos. 4. E-manual...1 No. Updated Scientech Technologies Pvt. Ltd. 13

Operating Manual Ver.1.1

Operating Manual Ver.1.1 Common Base NPN Transistor Characteristics Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731-

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 Colpitt s Oscillator Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail : info@scientech.bz

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 Common Collector Amplifier Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 Phase Shift Oscillator Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail :

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 Multivibrators (Astable and Monostable) Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731-

More information

Analog Lab Experiment Board Ver. 1.0

Analog Lab Experiment Board Ver. 1.0 PHASE SHIFT OSCILLATOR Analog Lab Experiment Board Ver. 1.0 QUALITY POLICY To be a Global Provider of Innovative and Affordable Electronic Equipments for Technology Training by enhancing Customer Satisfaction

More information

Analog Lab Experiment Board Ver. 1.0

Analog Lab Experiment Board Ver. 1.0 PASSIVE ATTENUATORS Analog Lab Experiment Board Ver. 1.0 QUALITY POLICY To be a Global Provider of Innovative and Affordable Electronic Equipments for Technology Training by enhancing Customer Satisfaction

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 FET Amplifier Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail : info@scientech.bz

More information

AB-30 V-I AND I-V CONVERTER

AB-30 V-I AND I-V CONVERTER V-I AND I-V CONVERTER ANALOG LAB EXPERIMENT BOARD Ver. 1.0 An ISO 9001: 2000 company 94-101, Electronic Complex, Pardesipura INDORE-452010, India. Tel.: 91-731-2570301 Fax: 91-731-2555643 Email: info@scientech.bz

More information

SCHERING BRIDGE AB13. Analog Lab Experiment Board Ver. 1.0

SCHERING BRIDGE AB13. Analog Lab Experiment Board Ver. 1.0 SCHERING BRIDGE AB13 Analog Lab Experiment Board Ver. 1.0 QUALITY POLICY To be a Global Provider of Innovative and Affordable Electronic Equipments for Technology Training by enhancing Customer Satisfaction

More information

AB-45 Operational Amplifier (Schmitt Trigger & Comparators) ANALOG LAB EXPERIMENT BOARD Ver. 1.0

AB-45 Operational Amplifier (Schmitt Trigger & Comparators) ANALOG LAB EXPERIMENT BOARD Ver. 1.0 Operational Amplifier (Schmitt Trigger & Comparators) ANALOG LAB EXPERIMENT BOARD Ver. 1.0 An ISO 9001: 2000 company 94-101, Electronic Complex, Pardesipura INDORE-452010, India. Tel.: 91-731-2570301 Fax:

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 UJT Characteristics Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643 e mail : info@scientech.bz

More information

Analog Lab Experiment Board Ver. 1.0

Analog Lab Experiment Board Ver. 1.0 SILICON, ZENER, LED DIODE CHARACTERISTICS Analog Lab Experiment Board Ver. 1.0 QUALITY POLICY To be a Global Provider of Innovative and Affordable Electronic Equipments for Technology Training by enhancing

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 Fourier Synthesis Trainer ST2603 Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, INDIA Ph: 91-731- 2556638, 2570301 Fax: 91-731- 2555643 E-mail

More information

Operating Manual Ver.1.1

Operating Manual Ver.1.1 SCR Triggering Techniques ST2703 Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643

More information

SCR Triggering Techniques Scientech 2703

SCR Triggering Techniques Scientech 2703 SCR Triggering Techniques Scientech 2703 Learning Material Ver 1.1 An ISO 9001:2008 company Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore - 452 010 India, + 91-731 4211100,

More information

DIGITAL ELECTRONICS ANALOG ELECTRONICS

DIGITAL ELECTRONICS ANALOG ELECTRONICS DIGITAL ELECTRONICS 1. N10 4 Bit Binary Universal shift register. 2. N22- Random Access Memory (16*4). 3. N23- Read Only Memory. 4. N4-R-S/D-T Flip flop, characteristic and comparison. 5. Master Slave

More information

Operating Manual Ver 1.1

Operating Manual Ver 1.1 Frequency Modulation and Demodulation Trainer ST2203 Operating Manual Ver 1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100

More information

PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES MICROTECH INDUSTRIES

PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES MICROTECH INDUSTRIES PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES µ MICROTECH INDUSTRIES 14A/ 1G, ULTADANGA ROAD GOPAL BHAVAN KOLKATA 700 004 Phone : (033) 3296 9273, Cell : 98312 63293 E- mail : hkg@cal3.vsnl.net.in

More information

Unit/Standard Number. LEA Task # Alignment

Unit/Standard Number. LEA Task # Alignment 1 Secondary Competency Task List 100 SAFETY 101 Demonstrate an understanding of State and School safety regulations. 102 Practice safety techniques for electronics work. 103 Demonstrate an understanding

More information

APPLIED ELECTRONIC CIRCUITS

APPLIED ELECTRONIC CIRCUITS SRM UNIVERSITY DEPARTMENT OF BIOMEDICAL ENGINEERING ODD Semester-2014-2015 BM1005 APPLIED ELECTRONIC CIRCUITS Course Code: BM1005 Course Title: APPLIED ELECTRONIC CIRCUITS Sem: III SEM B. Tech Second Year

More information

R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification:

R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification: DIGITAL IC TRAINER Model : DE-150 Object: To Study the Operation of Digital Logic ICs TTL and CMOS. To Study the All Gates, Flip-Flops, Counters etc. To Study the both the basic and advance digital electronics

More information

ANALOG COMMUNICATION

ANALOG COMMUNICATION ANALOG COMMUNICATION TRAINING LAB Analog Communication Training Lab consists of six kits, one each for Modulation (ACL-01), Demodulation (ACL-02), Modulation (ACL-03), Demodulation (ACL-04), Noise power

More information

Exercise 1: RF Stage, Mixer, and IF Filter

Exercise 1: RF Stage, Mixer, and IF Filter SSB Reception Analog Communications Exercise 1: RF Stage, Mixer, and IF Filter EXERCISE OBJECTIVE DISCUSSION On the circuit board, you will set up the SSB transmitter to transmit a 1000 khz SSB signal

More information

Learning Material Ver 1.1

Learning Material Ver 1.1 SCR Triggering Circuits Scientech 2702 Learning Material Ver 1.1 An ISO 9001:2008 company Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore - 452 010 India, + 91-731 4211100,

More information

DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS

DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS 4 PEARSON CUSTOM ELECTRONICS TECHNOLOGY DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS AVAILABLE MARCH 2009 Boylestad Introductory Circuit Analysis, 11/e, 0-13-173044-4 Introduction 32 LC4501 Voltage and

More information

i Intelligent Digitize Emulated Achievement Lab

i Intelligent Digitize Emulated Achievement Lab Electronics Circuits Equipment Intelligent Digitize Emulated Achievement Lab intelligent digitize emulated achievement lab is a digitized-based training system, which utilizes integrated Hardware Platform,

More information

The steeper the phase shift as a function of frequency φ(ω) the more stable the frequency of oscillation

The steeper the phase shift as a function of frequency φ(ω) the more stable the frequency of oscillation It should be noted that the frequency of oscillation ω o is determined by the phase characteristics of the feedback loop. the loop oscillates at the frequency for which the phase is zero The steeper the

More information

UNIT 1 MULTI STAGE AMPLIFIES

UNIT 1 MULTI STAGE AMPLIFIES UNIT 1 MULTI STAGE AMPLIFIES 1. a) Derive the equation for the overall voltage gain of a multistage amplifier in terms of the individual voltage gains. b) what are the multi-stage amplifiers? 2. Describe

More information

LINEAR IC APPLICATIONS

LINEAR IC APPLICATIONS 1 B.Tech III Year I Semester (R09) Regular & Supplementary Examinations December/January 2013/14 1 (a) Why is R e in an emitter-coupled differential amplifier replaced by a constant current source? (b)

More information

Learning Material Ver 1.1

Learning Material Ver 1.1 Insulated Gate Bipolar Transistor (IGBT) ST2701 Learning Material Ver 1.1 An ISO 9001:2008 company Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore - 452 010 India, + 91-731

More information

Learning Material Ver 1.1

Learning Material Ver 1.1 Data Formatting & Carrier Modulation Transmitter Trainer and Carrier Demodulation & Data Reformatting Receiver Trainer ST2106 & ST2107 Learning Material Ver 1.1 An ISO 9001 : 2000 company 94, Electronic

More information

Introduction to Simulation using EDWinXP

Introduction to Simulation using EDWinXP Introduction to Simulation using EDWinXP Introduction to Simulation using EDWinXP First Edition Copyright Notice ALL RIGHTS RESERVED. Any unauthorized reprint or use of this material is prohibited. No

More information

multiplier input Env. Det. LPF Y (Vertical) VCO X (Horizontal)

multiplier input Env. Det. LPF Y (Vertical) VCO X (Horizontal) Spectrum Analyzer Objective: The aim of this project is to realize a spectrum analyzer using analog circuits and a CRT oscilloscope. This interface circuit will enable to use oscilloscopes as spectrum

More information

Communication Circuit Lab Manual

Communication Circuit Lab Manual German Jordanian University School of Electrical Engineering and IT Department of Electrical and Communication Engineering Communication Circuit Lab Manual Experiment 2 Tuned Amplifier Eng. Anas Alashqar

More information

EE301 ELECTRONIC CIRCUITS CHAPTER 2 : OSCILLATORS. Lecturer : Engr. Muhammad Muizz Bin Mohd Nawawi

EE301 ELECTRONIC CIRCUITS CHAPTER 2 : OSCILLATORS. Lecturer : Engr. Muhammad Muizz Bin Mohd Nawawi EE301 ELECTRONIC CIRCUITS CHAPTER 2 : OSCILLATORS Lecturer : Engr. Muhammad Muizz Bin Mohd Nawawi 2.1 INTRODUCTION An electronic circuit which is designed to generate a periodic waveform continuously at

More information

OBJECTIVE TYPE QUESTIONS

OBJECTIVE TYPE QUESTIONS OBJECTIVE TYPE QUESTIONS Q.1 The breakdown mechanism in a lightly doped p-n junction under reverse biased condition is called (A) avalanche breakdown. (B) zener breakdown. (C) breakdown by tunnelling.

More information

Introductory Electronics for Scientists and Engineers

Introductory Electronics for Scientists and Engineers Introductory Electronics for Scientists and Engineers Second Edition ROBERT E. SIMPSON University of New Hampshire Allyn and Bacon, Inc. Boston London Sydney Toronto Contents Preface xiü 1 Direct Current

More information

Function Generator Using Op Amp Ic 741 Theory

Function Generator Using Op Amp Ic 741 Theory Function Generator Using Op Amp Ic 741 Theory Note: Op-Amps ua741, LM 301, LM311, LM 324 & AD 633 may be used To design an Inverting Amplifier for the given specifications using Op-Amp IC 741. THEORY:

More information

Ohm Technologiees.

Ohm Technologiees. +91-8048706704 Ohm Technologiees https://www.ohmtechnologiees.com/ Our company is engaged in manufacturing, supplying and importing the most sought after range Scientific Electronic Equipment. These products

More information

B.Sc. Syllabus for Electronics under CBCS. Semester-I

B.Sc. Syllabus for Electronics under CBCS. Semester-I Semester-I Title: Electronic Circuit Analysis Course Code: UELTC101 Credits: 4 Total Marks: 100 Internal Examination: 20 marks End Semester Examination: 80 marks Duration: 3 hours Validity of Syllabus:

More information

Let us consider the following block diagram of a feedback amplifier with input voltage feedback fraction,, be positive i.e. in phase.

Let us consider the following block diagram of a feedback amplifier with input voltage feedback fraction,, be positive i.e. in phase. P a g e 2 Contents 1) Oscillators 3 Sinusoidal Oscillators Phase Shift Oscillators 4 Wien Bridge Oscillators 4 Square Wave Generator 5 Triangular Wave Generator Using Square Wave Generator 6 Using Comparator

More information

Revised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level

Revised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level Unit/Standard Number Electrical, Electronic and Communications Engineering Technology/Technician CIP 15.0303 Task Grid Secondary Competency Task List 100 SAFETY 101 Demonstrate an understanding of state,

More information

Lesson Plan. Electronics 1-Total 51 Hours

Lesson Plan. Electronics 1-Total 51 Hours Lesson Plan. Electronics 1-Total 5s Unit I: Electrical Engineering materials:(10) Crystal structure & defects; Ceramic materials-structures, composites, processing and uses; Insulating laminates for electronics,

More information

Modulations Analog Modulations Amplitude modulation (AM) Linear modulation Frequency modulation (FM) Phase modulation (PM) cos Angle modulation FM PM Digital Modulations ASK FSK PSK MSK MFSK QAM PAM Etc.

More information

TEACHING & EXAMINATION SCHEME For the Examination 2015 ELECTRONICS. B.Sc. Part - I

TEACHING & EXAMINATION SCHEME For the Examination 2015 ELECTRONICS. B.Sc. Part - I TEACHING & EXAMINATION SCHEME For the Examination 2015 ELECTRONICS THEORY B.Sc. Part - I Elec. 101 Paper I Circuit Elements and Networks Pd/W Exam. Max. (45mts.) Hours Marks 150 2 3 50 Elec. 102 Paper

More information

Lab 4 : Transistor Oscillators

Lab 4 : Transistor Oscillators Objective: Lab 4 : Transistor Oscillators In this lab, you will learn how to design and implement a colpitts oscillator. In part II you will implement a RC phase shift oscillator Hardware Required : Pre

More information

DEPARTMENT OF ELECTRONICS

DEPARTMENT OF ELECTRONICS DEPARTMENT OF ELECTRONICS Academic Planner for odd Semesters Semester : I Subject : Electronics(ELT1). Course: B.Sc. (PME) Introduction to Number systems B Construction and types, working Review of P type

More information

Operating Manual Ver 1.1

Operating Manual Ver 1.1 Oscilloscope Caddo 802 with Logic Scope Operating Manual Ver 1.1. An ISO 9001 : 2000 company 94-101, Electronic Complex, Pardeshipura Indore - 452 010 India Tel : 91-731-2570301/02, 4211100 Fax : 91-731-2555643

More information

ADVANCED EXPERIMENTS IN MODERN COMMUNICATIONS

ADVANCED EXPERIMENTS IN MODERN COMMUNICATIONS ADVANCED EXPERIMENTS IN MODERN COMMUNICATIONS NEW FIBER OPTICS KIT New Generation Single-Board Telecoms Experimenter for Advanced Experiments Emona ETT-101 BiSKIT Multi-Experiment Telecommunications &

More information

Xeltronix.

Xeltronix. +91-8048720001 Xeltronix https://www.indiamart.com/xeltronix/ Reckoned firms engaged in manufacturing and supplying a quality array of Electronic Trainer Kits, we ensure that our products would serve the

More information

LIST OF TRAINING MODULES

LIST OF TRAINING MODULES LIST OF TRAINING MODULES S.NO. TYPE SECTION-A (CHARACTERISTICS) 1. Diode & Zener Diode Characteristics EE-1 2. Tunnel Diode Characteristics EE-P50 3. L.E.D. Characteristics EE-2 4. Transistor Characteristics

More information

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018 Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Electrical, Electronic and Communications Engineering Technology/Technician CIP 15.0303 Task Grid Secondary Competency Task List 100

More information

Exercise 2: FM Detection With a PLL

Exercise 2: FM Detection With a PLL Phase-Locked Loop Analog Communications Exercise 2: FM Detection With a PLL EXERCISE OBJECTIVE When you have completed this exercise, you will be able to explain how the phase detector s input frequencies

More information

Preface... iii. Chapter 1: Diodes and Circuits... 1

Preface... iii. Chapter 1: Diodes and Circuits... 1 Table of Contents Preface... iii Chapter 1: Diodes and Circuits... 1 1.1 Introduction... 1 1.2 Structure of an Atom... 2 1.3 Classification of Solid Materials on the Basis of Conductivity... 2 1.4 Atomic

More information

Gujarat University B. Sc. Electronics Semester I: ELE (Effective from: )

Gujarat University B. Sc. Electronics Semester I: ELE (Effective from: ) Unit - I: Components and Instrumentation: Gujarat University B. Sc. Electronics Semester I: ELE - 101 Passive Circuit devices: Resistors, nonlinear resistors, inductors, types of inductors, capacitors,

More information

UNIT 1. 9 What is the Causes of Free Response in Electrical Circuit. 12 Write the Expression for transient current and voltages of RL circuit.

UNIT 1. 9 What is the Causes of Free Response in Electrical Circuit. 12 Write the Expression for transient current and voltages of RL circuit. SUB: Electric Circuits and Electron Devices Course Code: UBEE309 UNIT 1 PART A 1 State Transient and Transient Time? 2 What is Tansient State? 3 What is Steady State? 4 Define Source Free Response 5 Define

More information

Hours / 100 Marks Seat No.

Hours / 100 Marks Seat No. 17445 21415 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Illustrate your answers with neat sketches wherever necessary. (3) Figures to the right indicate full marks. (4) Assume

More information

POS Perkins Statewide Articulation Agreement Documentation Coversheet

POS Perkins Statewide Articulation Agreement Documentation Coversheet POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL

More information

FREQUENCY AGILE FM MODULATOR INSTRUCTION BOOK IB

FREQUENCY AGILE FM MODULATOR INSTRUCTION BOOK IB FMT615C FREQUENCY AGILE FM MODULATOR INSTRUCTION BOOK IB1215-02 TABLE OF CONTENTS SECTION SUBJECT 1.0 Introduction 2.0 Installation & Operating Instructions 3.0 Specification 4.0 Functional Description

More information

multivibrator; Introduction to silicon-controlled rectifiers (SCRs).

multivibrator; Introduction to silicon-controlled rectifiers (SCRs). Appendix The experiments of which details are given in this book are based largely on a set of 'modules' specially designed by Dr. K.J. Close. These 'modules' are now made and marketed by Irwin-Desman

More information

DMI COLLEGE OF ENGINEERING

DMI COLLEGE OF ENGINEERING DMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING EC8453 - LINEAR INTEGRATED CIRCUITS Question Bank (II-ECE) UNIT I BASICS OF OPERATIONAL AMPLIFIERS PART A 1.Mention the

More information

INVITATION FOR QUOTATION. TEQIP-II/2015/UP1G01/Shopping/60

INVITATION FOR QUOTATION. TEQIP-II/2015/UP1G01/Shopping/60 INVITATION FOR QUOTATION TEQIP-II/2015/UP1G01/Shopping/60 24-Jul-2015 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the following

More information

Final Project Report E3990 Electronic Circuits Design Lab. Wii-Lock. Magic Wand Remote Unlocking Device

Final Project Report E3990 Electronic Circuits Design Lab. Wii-Lock. Magic Wand Remote Unlocking Device Final Project Report E3990 Electronic Circuits Design Lab Wii-Lock Magic Wand Remote Unlocking Device MacArthur Daughtery Brook Getachew David Kohn Joseph Wang Submitted in partial fulfillment of the requirements

More information

DEPT. OF ELECTRICAL & ELECTRONICS ENGG SRM INSTITUTE OF SCIENCE & TECHNOLOGY LESSON PLAN. Subject Name : Electronic Circuits

DEPT. OF ELECTRICAL & ELECTRONICS ENGG SRM INSTITUTE OF SCIENCE & TECHNOLOGY LESSON PLAN. Subject Name : Electronic Circuits DEPT. OF ELECTRICAL & ELECTRONICS ENGG SRM INSTITUTE OF SCIENCE & TECHNOLOGY LESSON PLAN Subject Code : EE0208 Subject Name : Electronic Circuits Branch : ELECTRICAL AND ELECTRONICS Year : II Section C

More information

LBI-30398N. MAINTENANCE MANUAL MHz PHASE LOCK LOOP EXCITER 19D423249G1 & G2 DESCRIPTION TABLE OF CONTENTS. Page. DESCRIPTION...

LBI-30398N. MAINTENANCE MANUAL MHz PHASE LOCK LOOP EXCITER 19D423249G1 & G2 DESCRIPTION TABLE OF CONTENTS. Page. DESCRIPTION... MAINTENANCE MANUAL 138-174 MHz PHASE LOCK LOOP EXCITER 19D423249G1 & G2 LBI-30398N TABLE OF CONTENTS DESCRIPTION...Front Cover CIRCUIT ANALYSIS... 1 MODIFICATION INSTRUCTIONS... 4 PARTS LIST AND PRODUCTION

More information

GATE: Electronics MCQs (Practice Test 1 of 13)

GATE: Electronics MCQs (Practice Test 1 of 13) GATE: Electronics MCQs (Practice Test 1 of 13) 1. Removing bypass capacitor across the emitter leg resistor in a CE amplifier causes a. increase in current gain b. decrease in current gain c. increase

More information

MODEL ANSWER SUMMER 17 EXAMINATION Subject Title: Linear Integrated Circuit Subject Code:

MODEL ANSWER SUMMER 17 EXAMINATION Subject Title: Linear Integrated Circuit Subject Code: MODEL ANSWER SUMMER 17 EXAMINATION Subject Title: Linear Integrated Circuit Subject Code: Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as

More information

DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC6202 ELECTRONIC DEVICES AND CIRCUITS

DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC6202 ELECTRONIC DEVICES AND CIRCUITS DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC6202 ELECTRONIC DEVICES AND CIRCUITS UNIT-I - PN DIODEAND ITSAPPLICATIONS 1. What is depletion region in PN junction?

More information

4. Forward bias of a silicon P-N junction will produce a barrier voltage of approximately how many volts? A. 0.2 B. 0.3 C. 0.7 D. 0.

4. Forward bias of a silicon P-N junction will produce a barrier voltage of approximately how many volts? A. 0.2 B. 0.3 C. 0.7 D. 0. 1. The dc current through each diode in a bridge rectifier equals A. the load current B. half the dc load current C. twice the dc load current D. one-fourth the dc load current 2. When matching polarity

More information

Electronics Laboratory And Students kits For Self-Study And Distant Learning. By: Charbel T. Fahed

Electronics Laboratory And Students kits For Self-Study And Distant Learning. By: Charbel T. Fahed Electronics Laboratory And Students kits For Self-Study And Distant Learning By: Charbel T. Fahed Table of Contents I. DC and AC fundamentals 1) Color Code 2) Ohm s Law 3) Series Circuits 4) Parallel Circuits

More information

ERICSSONZ LBI-30398P. MAINTENANCE MANUAL MHz PHASE LOCKED LOOP EXCITER 19D423249G1 & G2 DESCRIPTION TABLE OF CONTENTS

ERICSSONZ LBI-30398P. MAINTENANCE MANUAL MHz PHASE LOCKED LOOP EXCITER 19D423249G1 & G2 DESCRIPTION TABLE OF CONTENTS MAINTENANCE MANUAL 138-174 MHz PHASE LOCKED LOOP EXCITER 19D423249G1 & G2 TABLE OF CONTENTS Page DESCRIPTION... Front Cover CIRCUIT ANALYSIS...1 MODIFICATION INSTRUCTIONS...4 PARTS LIST...5 PRODUCTION

More information

4/30/2012. General Class Element 3 Course Presentation. Practical Circuits. Practical Circuits. Subelement G7. 2 Exam Questions, 2 Groups

4/30/2012. General Class Element 3 Course Presentation. Practical Circuits. Practical Circuits. Subelement G7. 2 Exam Questions, 2 Groups General Class Element 3 Course Presentation ti ELEMENT 3 SUB ELEMENTS General Licensing Class Subelement G7 2 Exam Questions, 2 Groups G1 Commission s Rules G2 Operating Procedures G3 Radio Wave Propagation

More information

EC202- ELECTRONIC CIRCUITS II Unit- I -FEEEDBACK AMPLIFIER

EC202- ELECTRONIC CIRCUITS II Unit- I -FEEEDBACK AMPLIFIER EC202- ELECTRONIC CIRCUITS II Unit- I -FEEEDBACK AMPLIFIER 1. What is feedback? What are the types of feedback? 2. Define positive feedback. What are its merits and demerits? 3. Define negative feedback.

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

Transistor Digital Circuits

Transistor Digital Circuits Recapitulation Transistor Digital Circuits The transistor Operating principle and regions Utilization of the transistor Transfer characteristics, symbols Controlled switch model BJT digital circuits MOSFET

More information

30 MHz Oscilloscope Scientech 801C

30 MHz Oscilloscope Scientech 801C 30 MHz Oscilloscope Scientech 801C Learning Material Ver. 1.1 An ISO 9001:2008 company Scientech Technologies Pvt. Ltd. 94, Electronic Complex, Pardesipura, Indore - 452 010 India, + 91-731 4211100, :

More information

Analog Electronic Circuits Lab-manual

Analog Electronic Circuits Lab-manual 2014 Analog Electronic Circuits Lab-manual Prof. Dr Tahir Izhar University of Engineering & Technology LAHORE 1/09/2014 Contents Experiment-1:...4 Learning to use the multimeter for checking and indentifying

More information

UNIT I Introduction to DC & AC circuits

UNIT I Introduction to DC & AC circuits SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Basic Electrical and Electronics Engineering (16EE207) Year & Sem: II-B.

More information

GOVERNMENT OF KARNATAKA KARNATAKA STATE PRE-UNIVERSITY EDUCATION EXAMINATION BOARD II YEAR PUC EXAMINATION JULY-2012 SCHEME OF VALUATION

GOVERNMENT OF KARNATAKA KARNATAKA STATE PRE-UNIVERSITY EDUCATION EXAMINATION BOARD II YEAR PUC EXAMINATION JULY-2012 SCHEME OF VALUATION GOVERNMENT OF KARNATAKA KARNATAKA STATE PRE-UNIVERSITY EDUCATION EXAMINATION BOARD II YEAR PUC EXAMINATION JULY-0 SCHEME OF VALUATION Subject Code: 40 Subject: PART - A 0. Which region of the transistor

More information

cosω t Y AD 532 Analog Multiplier Board EE18.xx Fig. 1 Amplitude modulation of a sine wave message signal

cosω t Y AD 532 Analog Multiplier Board EE18.xx Fig. 1 Amplitude modulation of a sine wave message signal University of Saskatchewan EE 9 Electrical Engineering Laboratory III Amplitude and Frequency Modulation Objectives: To observe the time domain waveforms and spectra of amplitude modulated (AM) waveforms

More information

Operational Amplifiers

Operational Amplifiers Operational Amplifiers Table of contents 1. Design 1.1. The Differential Amplifier 1.2. Level Shifter 1.3. Power Amplifier 2. Characteristics 3. The Opamp without NFB 4. Linear Amplifiers 4.1. The Non-Inverting

More information

THE AMAZING BARLOW WADLEY XCR-30 CRYSTAL CONTROLLED 30 BAND TRANSISTOR RADIO. (A method to set the AGC) H. Holden, 2018.

THE AMAZING BARLOW WADLEY XCR-30 CRYSTAL CONTROLLED 30 BAND TRANSISTOR RADIO. (A method to set the AGC) H. Holden, 2018. THE AMAZING BARLOW WADLEY XCR-30 CRYSTAL CONTROLLED 30 BAND TRANSISTOR RADIO. (A method to set the AGC) H. Holden, 2018. Introduction: The Barlow Wadley XCR-30 radio is well known to amateur radio enthusiasts

More information

070 ELECTRONICS WORKS EXAMINATION STRUCTURE

070 ELECTRONICS WORKS EXAMINATION STRUCTURE 070 ELECTRONICS WORKS EXAMINATION STRUCTURE The trade will be examined under the following components or subject grouping: Electronic Devices and Circuit, Radio Communication and Television. EXAMINATION

More information

Logic Gates & Training Boards

Logic Gates & Training Boards Logic Gates & Training Boards ANALOG TO DIGITAL (A/D) CONVERTOR (ELP.112.140) Objective : To study Analog to Digital & Digital to Analog convertors using R-2R network & Successive Approximation Method.

More information

Electricity and Electronics Constructor Kits

Electricity and Electronics Constructor Kits EEC470 Series The Electricity and Electronics Constructor EEC470 series is a structured practical training programme comprising an unpowered construction deck (EEC470) and a set of educational kits. Each

More information

ELECTRONICS ADVANCED SUPPLEMENTARY LEVEL

ELECTRONICS ADVANCED SUPPLEMENTARY LEVEL ELECTRONICS ADVANCED SUPPLEMENTARY LEVEL AIMS The general aims of the subject are : 1. to foster an interest in and an enjoyment of electronics as a practical and intellectual discipline; 2. to develop

More information

AC LAB ECE-D ecestudy.wordpress.com

AC LAB ECE-D ecestudy.wordpress.com PART B EXPERIMENT NO: 1 AIM: PULSE AMPLITUDE MODULATION (PAM) & DEMODULATION DATE: To study Pulse Amplitude modulation and demodulation process with relevant waveforms. APPARATUS: 1. Pulse amplitude modulation

More information

Department of Electronics & Telecommunication Engg. LAB MANUAL. B.Tech V Semester [ ] (Branch: ETE)

Department of Electronics & Telecommunication Engg. LAB MANUAL. B.Tech V Semester [ ] (Branch: ETE) Department of Electronics & Telecommunication Engg. LAB MANUAL SUBJECT:-DIGITAL COMMUNICATION SYSTEM [BTEC-501] B.Tech V Semester [2013-14] (Branch: ETE) KCT COLLEGE OF ENGG & TECH., FATEHGARH PUNJAB TECHNICAL

More information

EXPERIMENT WISE VIVA QUESTIONS

EXPERIMENT WISE VIVA QUESTIONS EXPERIMENT WISE VIVA QUESTIONS Pulse Code Modulation: 1. Draw the block diagram of basic digital communication system. How it is different from analog communication system. 2. What are the advantages of

More information

Associate In Applied Science In Electronics Engineering Technology Expiration Date:

Associate In Applied Science In Electronics Engineering Technology Expiration Date: PROGRESS RECORD Study your lessons in the order listed below. Associate In Applied Science In Electronics Engineering Technology Expiration Date: 1 2330A Current and Voltage 2 2330B Controlling Current

More information

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning SENSORS AND TRANSDUCERS TRAINER IT.MLD900 The s and Instrumentation Trainer introduces students to input sensors, output actuators, signal conditioning circuits, and display devices through a wide range

More information

Communication Circuit Lab Manual

Communication Circuit Lab Manual German Jordanian University School of Electrical Engineering and IT Department of Electrical and Communication Engineering Communication Circuit Lab Manual Experiment 3 Crystal Oscillator Eng. Anas Alashqar

More information

Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit

Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Contents p. v Preface p. ix Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Analysis p. 16 MultiSIM Lab

More information

GOVERNMENT OF KARNATAKA KARNATAKA STATE PRE-UNIVERSITY EDUCATION EXAMINATION BOARD II YEAR PUC EXAMINATION MARCH-2013 SCHEME OF VALUATION

GOVERNMENT OF KARNATAKA KARNATAKA STATE PRE-UNIVERSITY EDUCATION EXAMINATION BOARD II YEAR PUC EXAMINATION MARCH-2013 SCHEME OF VALUATION GOVERNMENT OF KARNATAKA KARNATAKA STATE PRE-UNIVERSITY EDUCATION EXAMINATION BOARD II YEAR PUC EXAMINATION MARCH-03 SCHEME OF VALUATION Subject Code: 0 Subject: PART - A 0. What does the arrow mark indicate

More information

INSTRUCTION MANUAL MODEL 2779 SUBCARRIER MODULATOR

INSTRUCTION MANUAL MODEL 2779 SUBCARRIER MODULATOR INSTRUCTION MANUAL MODEL 2779 SUBCARRIER MODULATOR Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., and may not be reproduced or duplicated in any form without

More information

Facility of Engineering. Biomedical Engineering Department. Medical Electronic Lab BME (317) Post-lab Forms

Facility of Engineering. Biomedical Engineering Department. Medical Electronic Lab BME (317) Post-lab Forms Facility of Engineering Biomedical Engineering Department Medical Electronic Lab BME (317) Post-lab Forms Prepared by Eng.Hala Amari Spring 2014 Facility of Engineering Biomedical Engineering Department

More information

ELECTRONIC CIRCUITS LAB

ELECTRONIC CIRCUITS LAB ELECTRONIC CIRCUITS LAB 1 2 STATE INSTITUTE OF TECHNICAL TEACHERS TRAINING AND RESEARCH GENERAL INSTRUCTIONS Rough record and Fair record are needed to record the experiments conducted in the laboratory.

More information

SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE) PART - A

SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE) PART - A SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Basic Electrical and Electronics Engineering (16EE207) Year & Sem: II-B.

More information

AM, PM and FM mo m dula l ti t o i n

AM, PM and FM mo m dula l ti t o i n AM, PM and FM modulation What is amplitude modulation In order that a radio signal can carry audio or other information for broadcasting or for two way radio communication, it must be modulated or changed

More information