Data Converters 2. Selection Guides HIGH PERFORMANCE ANALOG
|
|
|
- Noel Russell
- 5 years ago
- Views:
Transcription
1 2 HIGH PERFORMANCE Selection Guides to Digital (ADCs) 1-Channel (ADCs) Bit Bit Bit Bit Bit Bit Channel (ADCs) x8-Bit x10-Bit Channel (ADCs) x8-Bit Integrating (A-D) Digital to (DACs) 1-Channel (DACs) Bit, 1-Channel DACs Bit Bit Bit Channel (DACs) x8-Bit x10-Bit x12-Bit x14-Bit Channel, (DACs) x8-Bit Sample and Hold Sample and Hold
2 to Digital (ADCs) 1-Channel (ADCs) 6-Bit, 1-Channel ADCs Description V REF Pkg. HI-5701 A/D Converter, 6-Bit, 30MSPS, Flash 30 Flash 20 4 CMOS-II Ext SOIC 8-Bit, 1-Channel ADCs Description V REF Pkg. HI1175 A/D Converter, 8-Bit, 20MSPS, Flash 20 Flash CMOS Int/Ext SOIC HI1179 A/D Converter, 8-Bit, 35MSPS, Video 35 2-Step CMOS , Int/Ext MQFP HI1386 A/D Converter, 8-Bit, 75MSPS, Flash 75 Flash Bipolar Ext PDIP HI2302 HI3026 A/D Converter, 8-Bit, 50MSPS, Converter with Clamp A/D Converter, 8-Bit, 120MSPS, Bandwidth 150MHz, Flash 50 2-Step CMOS +5VA, +3.3VD Int MQFP 120 Flash Bipolar +5, ± Ext MQFP HI3026A HI3246 HI3256 A/D Converter, 8-Bit, 140MSPS, Bandwidth 150MHz, Flash A/D Converter, 8-Bit, 120MSPS, Bandwidth 250MHz, Flash A/D Converter, 8-Bit, 12MSPS, Bandwidth 250MHz, Flash, with PS Saving Pin 140 Flash Bipolar +5, ± Ext MQFP 120 Flash Bipolar +5, ± Ext MQFP 120 Flash Bipolar +5, ± Ext LQFP HI3276 HI3286 A/D Converter, 8-Bit, 160MSPS, Bandwidth 250MHz, Flash A/D Converter, 8-Bit, 160MSPS, Bandwidth 250MHz, Flash, with PS Saving Pin 160 Flash Bipolar +5, ± Ext MQFP 160 Flash Bipolar +5, ± Ext LQFP HI5675 A/D Converter, Flash, 8-Bit, 20MSPS 20 Flash 18 5 CMOS Int/Ext SOIC HI5714 A/D Converter, 8-Bit, 40/60/75/80MSPS 40, 75 2-Step Folding ADC0803 A/D Converter, 8-Bit, Error ±0.5LSB V REF /2 Adjusted, Microprocessor-Compatible BiCMOS Ext SOIC 0.01 SAR - 0 to 5 CMOS Ext PDIP ADC0804 A/D Converter, 8-Bit, Error ±1LSB V REF /2 Not Adjusted, Microprocessor-Compatible 0.01 SAR - 0 to 5 CMOS Ext PDIP 2-2
3 10-Bit, 1-Channel ADCs Description V REF Pkg. HI5746 A/D Converter, 10-Bit, 40MSPS, Internal sample and hold 40 Pipeline CMOS +5VA, +3VD 2 1 Ext SOIC, SSOP HI5766 A/D Converter, 10-Bit, 60MSPS 60 Pipeline CMOS +5VA, +3VD 2 1 Ext SOIC, SSOP HI5767 A/D Converter, 10-Bit, 20/40/60MSPS, Internal Voltage Reference 12-Bit, 1-Channel ADCs HI-774/883 Description A/D Converter, 12-Bit, 100KSPS, MIL. STD 20, 40, 60 Pipeline CMOS +5VA, +3VD Int/Ext SOIC, SSOP 0.1 SAR - 0 to 10 or -5 to 5 V REF Pkg. Bipolar ± Int/Ext CDIP2-T28 HI5805 A/D Converter, 12-Bit, 5MSPS 5 Pipeline BiCMOS +5VA, +3VD 2 1 Int SOIC HI-574A A/D Converter, 50KSPS, 150ns, Reference and Clock, Full 8/12/16-Bit Microprocessor Bus 0.04 SAR - ±10 or 0 to 20 Bipolar ±12 to ± Int/Ext PDIP, SBDIP HI-674A A/D Converter, 83KSPS, Bus Access Time 150ns, Reference and Clock, Full 8/12/16-Bit Microprocessor Bus SAR - ±10 or 0 to 20 Bipolar ±12 to ± Int/Ext PDIP, SBDIP HI5812 A/D Converter, 12-Bit, 750kHz, Internal Track and Hold, Conversion Time 20µs 0.05 SAR 1 0 to 5 CMOS +3 to Ext SOIC, PDIP 16-Bit, 1-Channel ADCs Description V REF Pkg. HI7188 A/D, Sigma Delta, 16-Bit, 8-Channel, High Precision, FCLOCK:3.6864MHz, Conversion rate:10sps-2ksps th Order Sigma Delta - ±2.5 BiCMOS ±5 - - Ext MQFP 24-Bit, 1-Channel ADCs HI7190 Description A/D, Sigma Delta, 24-Bit, High Precision, 22-Bits Resolution No Missing Codes, FCLOCK:10MHz, Conversion :10SPS-2KSPS nd Order Sigma Delta V REF Pkg. - ±2.5 BiCMOS ±5 - - Ext SOIC, PDIP HI7191 A/D, Sigma Delta, 24-Bit, High Precision, 20-Bits Resolution No Missing Codes, FCLOCK:10MHz, Conversion :10SPS-2KSPS nd Order Sigma Delta - ±2.5 BiCMOS ±5 - - Ext SOIC, PDIP 2-3
4 2-Channel (ADCs) 2x8-Bit, 2-Channel ADCs Description V REF Pkg. HI5662 A/D Converter, Dual, 8-Bit, 60MSPS, Internal Voltage Reference 2x10-Bit, 2-Channel ADCs HI5762 Description A/D Converter, Dual, 10-Bit, 60MSPS, Internal Voltage Reference 60 Pipeline CMOS +5VA, +3VD Int/Ext MQFP V REF Pkg. 60 Pipeline CMOS +5VA, +3VD 2 1 Int/Ext MQFP 3-Channel (ADCs) 3x8-Bit, 3-Channel ADCs HI2303 Description A/D Converter, Triple, 8-Bit, 50MSPS, Converter with Clamp Integrating (A-D) Description V REF Pkg Step CMOS +5VA, +3.3VD Ext MQFP V REF Pkg. CA3162 A/D Converter for 3-Digit 3-Digits 4, 96Hz Integrating - +1 to -0.1 Bipolar PDIP HI-7159A A/D Converter, 5-1/2 Digit, 15 Conversions/sec in 5 1/2 Digit Mode, 60 Conversions/sec in 4 1/2 Digit Mode 5.5-Digits Step V to +2.5V CMOS ± Ext PDIP, CerDIP ICL7106 ICL7107 ICL /2 Digit, Liquid Crystal, A/D 3 1/2 Digit, LED, A/D 3 1/2 Digit, Low, Single-Chip A/D Converter 3.5-Digits 3Hz (typ) Integrating - ±0.2 CMOS ±5 - - Int/Ext PDIP, MQFP 3.5-Digits 3Hz (typ) Integrating - ±0.2 CMOS ±5 - - Int/Ext PDIP, MQFP 3.5-Digits 3Hz (typ) Integrating - ±0.2 CMOS ±5 - - Int/Ext PDIP ICL7135 ICL /2 Digit, BCD, A/D Converter 3 1/2 Digit LCD/LED, Low, A/D with Overrange Recovery 4.5-Digits 2Hz (typ) Integrating - ±0.2 CMOS Int/Ext PDIP 3.5-Digits 3Hz (typ) Integrating - ±0.2 CMOS ±5 - - Int/Ext PDIP, MQFP 2-4
5 Digital to (DACs) 1-Channel (DACs) 8-Bit, 1-Channel DACs AD7523 Description D/A Converter, 8-Bit, Multiplying, 6.7MHz V REF Pkg I CMOS Ext PDIP CA3338 CA3338A HI1171 D/A Converter, Video, CMOS, 8-Bit, R2R Method, 50MSPS, 1LSB D/A Converter, Video, CMOS, 8-Bit, R2R Method, 50MSPS, 0.75LSB D/A Converter, 8-Bit, 40 MSPS, High Speed 8 50 V CMOS Ext PDIP, SOIC 8 50 V CMOS Ext PDIP, SOIC 8 40 I CMOS Ext SOIC HI3338 D/A Converter, 8-Bit, CMOS, 50MHz, R2R 8 50 V CMOS Ext SOIC HI5660 D/A Converter, 8-Bit, 125/60MSPS, High Speed 10-Bit, 1-Channel DACs Description 8 60, 125 I CMOS +3 to Int TSSOP, SOIC V REF Pkg. HI20201 D/A Converter, 10-Bit, 160MSPS, Ultra High Speed I Bipolar Ext SOIC, PDIP HI2315 HI5760 ISL5761 D/A Converter, 10-Bit, 80MSPS, Ultra-Low Glitch Version A/D Converter, 10-Bit, 60/125MSPS, Internal Voltage Reference D/A Converter, 10 Bit, 130/210MSPS, High Speed, +3.3V I CMOS Ext MQFP 10 60, 125 I CMOS +3 to Int/Ext TSSOP, SOIC , 210 I CMOS Int/Ext TSSOP, SOIC AD7520 D/A Converter, 10-Bit, Multiplying, 1MHz 10 1 I CMOS +5 to Monotonic Ext PDIP AD7533 D/A Converter, 10-Bit, Multiplying, 1.7MHz I CMOS +5 to Monotonic Ext PDIP 12-Bit, 1-Channel DACs Description V REF Pkg. HI5731 D/A Converter, 12-Bit, 100MSPS, High Speed I BiCMOS 5, Int/Ext SOIC, PDIP HI5735 D/A Converter, 12-Bit, 80MSPS, 650mW, +5V and -5.2V, High Speed Video, TTL I BiCMOS 5, Int/Ext SOIC HI5860 D/A Converter, 12-Bit, 130MSPS, High Speed I CMOS +3 to Int/Ext SOIC ISL5861 D/A Converter, 12-Bit, 130/210MSPS, High Speed, +3.3V , 210 I CMOS Int/Ext TSSOP, SOIC 2-5
6 12-Bit, 1-Channel DACs (Continued) AD7521 Description D/A Converter, 12-Bit, Multiplying, 10-Bit Linearity, 1MHz V REF Pkg I CMOS ±5 to ±15 2 Monotonic Ext PDIP HI-565A HI-DAC80V D/A Converter, 12-Bit, 6.7MHz, Settles to ±0.5LSB in 250ns (), with Reference D/A Converter, 12-Bit, Settling Time 1.5-3µs, R2R, Low Cost 14-Bit, 1-Channel DACs 2-Channel (DACs) Description I Bipolar ±12 to ± Int/Ext SBDIP V Bipolar ±12 to ± Int/Ext PDIP V REF Pkg. HI5741 D/A Converter, 14-Bit, 100MSPS, High Speed I BiCMOS 5, Int SOIC HI5960 D/A Converter, 130MSPS, 14-Bit, High Speed I CMOS +3 to Int/Ext SOIC ISL5961 D/A Converter, 14 Bit, 130/210/250MSPS, High Speed, +3.3V 2x8-Bit, 2-Channel DACs Description , 210 I CMOS Int/Ext TSSOP, SOIC V REF Pkg. HI5628 D/A Converter, Dual CMOS, 8-Bit, 125/60MSPS 2x8 60, 125 I CMOS +3 to Int/Ext LQFP ISL5629 D/A Converter, Dual, 8 Bit, 130/210MSPS, High Speed, +3.3V 2x10-Bit, 2-Channel DACs Description 2x8 130, 210 I CMOS Int/Ext LQFP V REF Pkg. HI5728 D/A Converter, Dual, 10-Bit, 125/60MSPS, High Speed 2x10 60, 125 I CMOS +3 to Int/Ext LQFP ISL5729 D/A Converter, Dual, 10 Bit, 130/210MSPS, High Speed, +3.3V 2x10 130, 210 I CMOS Int/Ext LQFP 2-6
7 2x12-Bit, 2-Channel DACs Description V REF Pkg. HI5828 D/A Converter, Dual, 12-Bit, 130MSPS, High Speed 2x I CMOS +3 to Int LQFP ISL5829 D/A Converter, Dual, 12 Bit, 130/210MSPS, High Speed, +3.3V 2x12 130, 210 I CMOS Int/Ext LQFP 2x14-Bit, 2-Channel DACs Description V REF Pkg. ISL5929 D/A Converter, Dual, 14 Bit, 130/210MSPS, High Speed, +3.3V 2x14 130, 210 I CMOS Int/Ext LQFP 3-Channel, (DACs) 3x8-Bit, 2-Channel DACs Description V REF Pkg. HI1178 D/A Converter, Triple, 8-Bit, 40MSPS, RGB 3x8 40 I CMOS Ext MQFP Sample and Hold Sample and Hold HA-2420 Description Sample and Hold, 3.2µs Acquisition Time, JFET Slew (V/µs) I BIAS (na) I CC / Amp (ma) A OL (db) V IO (V/µs) (mv) EXT# Hold Cap# t ACQ (ns) Droop (µv/µs) Hold Step Error (mv) Y CerDIP, PDIP Pkg. HA-2425 Sample and Hold, 3.2µs Acquisition Time, JFET input, Relaxed Spec Y CerDIP, PDIP HA-5320 Sample and Hold, 1µs Acquisition Time, Precision Y CerDIP, PDIP, SOIC HA-5330 HA-5340 Sample and Hold, 650ns Acquisiton Time, Precision Sample and Hold, 700ns Acquisition Time, Precision, Low Distortion N CerDIP N SOIC HA5351 Sample and Hold, Low Voltage, 64ns Acquisition Time N SOIC 2-7
AD9772A - Functional Block Diagram
F FEATURES single 3.0 V to 3.6 V supply 14-Bit DAC Resolution 160 MPS Input Data Rate 67.5 MHz Reconstruction Passband @ 160 MPS 74 dbc FDR @ 25 MHz 2 Interpolation Filter with High- or Low-Pass Response
Signal Chain. Selector Guide. Inside. Edition 3, April 2011
Signal Chain Selector Guide VOLTAGE REFERENCE VOLTAGE REFERENCE µc MUX/SWITCH ACTIVE FILTER OP AMP ELECTRICAL ISOLATION DAC ACTIVE FILTER OP AMP ADC METER/ DIGITAL POTENTIO R RESISTOR-DIVIDE METER/ DIGITAL
PIN CONFIGURATIONS FEATURES APPLICATION ORDERING INFORMATION. FE, N Packages
DESCRIPTION The are monolithic sample-and-hold circuits which utilize high-voltage ion-implant JFET technology to obtain ultra-high DC accuracy with fast acquisition of signal and low droop rate. Operating
INTEGRATED CIRCUITS. AN109 Microprocessor-compatible DACs Dec
INTEGRATED CIRCUITS 1988 Dec DAC products are designed to convert a digital code to an analog signal. Since a common source of digital signals is the data bus of a microprocessor, DAC circuits that are
Working with ADCs, OAs and the MSP430
Working with ADCs, OAs and the MSP430 Bonnie Baker HPA Senior Applications Engineer Texas Instruments 2006 Texas Instruments Inc, Slide 1 Agenda An Overview of the MSP430 Data Acquisition System SAR Converters
Four-Channel Sample-and-Hold Amplifier AD684
a FEATURES Four Matched Sample-and-Hold Amplifiers Independent Inputs, Outputs and Control Pins 500 ns Hold Mode Settling 1 s Maximum Acquisition Time to 0.01% Low Droop Rate: 0.01 V/ s Internal Hold Capacitors
4 x 10 bit Free Run A/D 4 x Hi Comparator 4 x Low Comparator IRQ on Compare MX839. C-BUS Interface & Control Logic
DATA BULLETIN MX839 Digitally Controlled Analog I/O Processor PRELIMINARY INFORMATION Features x 4 input intelligent 10 bit A/D monitoring subsystem 4 High and 4 Low Comparators External IRQ Generator
Serial Input 18-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER
Serial Input 8-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER FEATURES 8-BIT MONOLITHIC AUDIO D/A CONVERTER LOW MAX THD + N: 92dB Without External Adjust 00% PIN COMPATIBLE WITH INDUSTRY STD 6-BIT PCM56P
10-Bit µp-compatible D/A converter
DESCRIPTION The is a microprocessor-compatible monolithic 10-bit digital-to-analog converter subsystem. This device offers 10-bit resolution and ±0.1% accuracy and monotonicity guaranteed over full operating
Dual/Quad, Low Power CMOS Operational Amplifiers. Price US $ ICL7621DCBA Active Comm 8 Ld SOIC Part No. Status Temp.
ICL7621 Printer Friendly Version Dual/Quad, Low Power CMOS Operational Datasheet & Related Docs Description Key Features Parametric Data Application Diagrams Related Devices Ordering Information Part No.
Software Programmable Gain Amplifier AD526
a FEATURES Digitally Programmable Binary Gains from to 6 Two-Chip Cascade Mode Achieves Binary Gain from to 256 Gain Error: 0.0% Max, Gain =, 2, 4 (C Grade) 0.02% Max, Gain = 8, 6 (C Grade) 0.5 ppm/ C
HA Microsecond Precision Sample and Hold Amplifier. Features. Applications. Pinouts. Ordering Information. Data Sheet August 24, 2005 FN2857.
Data Sheet FN85. Microsecond Precision Sample and Hold Amplifier The was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. ADC0820 8-Bit High Speed µp Compatible A/D Converter with Track/Hold Function
CA3140, CA3140A. 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output. Description. Features. Applications. Ordering Information
November 99 SEMICONDUCTOR CA, CAA.MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output Features MOSFET Input Stage - Very High Input Impedance (Z IN ) -.TΩ (Typ) - Very Low Input Current (I
Multiplying DACs. Flexible Building Blocks.
Multiplying DACs Flexible Building Blocks Analog Devices has a comprehensive family of 8-/10-/12-/14-/16-bit multiplying digital-to-analog converters. As a result of manufacture on a CMOS submicron process,
8-Bit, high-speed, µp-compatible A/D converter with track/hold function ADC0820
8-Bit, high-speed, µp-compatible A/D converter with DESCRIPTION By using a half-flash conversion technique, the 8-bit CMOS A/D offers a 1.5µs conversion time while dissipating a maximum 75mW of power.
CMOS 12-Bit Multiplying DIGITAL-TO-ANALOG CONVERTER Microprocessor Compatible
CMOS 12-Bit Multiplying DIGITAL-TO-ANALOG CONVERTER Microprocessor Compatible FEATURES FOUR-QUADRANT MULTIPLICATION LOW GAIN TC: 2ppm/ C typ MONOTONICITY GUARANTEED OVER TEMPERATURE SINGLE 5V TO 15V SUPPLY
CONNECTION DIAGRAMS TO-99 (H) Package. 8-Lead Plastic Mini-DIP (N) 8-Lead SOIC (R) Package and 8-Lead Cerdip (Q) Packages
FEATURES AC PERFORMANCE 500 ns Settling to 0.01% for 10 V Step 1.5 s Settling to 0.0025% for 10 V Step 75 V/ s Slew Rate 0.0003% Total Harmonic Distortion (THD) 13 MHz Gain Bandwidth Internal Compensation
LC2 MOS Complete 12-Bit Multiplying DAC AD7845
a FEATURES 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Guaranteed Monotonic (T MIN to T MAX ) Space-Saving 0.3" DIPs and 24- or 28-Terminal Surface Mount Packages Application Resistors
High Speed, Precision Sample-and-Hold Amplifier AD585
a FEATURES 3.0 s Acquisition Time to 0.01% max Low Droop Rate: 1.0 mv/ms max Sample/Hold Offset Step: 3 mv max Aperture Jitter: 0.5 ns Extended Temperature Range: 55 C to +125 C Internal Hold Capacitor
Serial Input 18-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER
Serial Input 8-Bit Monolithic Audio DIGITAL-TO-ANALOG CONVERTER FEATURES 8-BIT MONOLITHIC AUDIO D/A CONVERTER LOW MAX THD + N: 92dB Without External Adjust 00% PIN COMPATIBLE WITH INDUSTRY STD 6-BIT PCM56P
Octal Sample-and-Hold with Multiplexed Input SMP18
a FEATURES High Speed Version of SMP Internal Hold Capacitors Low Droop Rate TTL/CMOS Compatible Logic Inputs Single or Dual Supply Operation Break-Before-Make Channel Addressing Compatible With CD Pinout
LC2 MOS Octal 8-Bit DAC AD7228A
a FEATURES Eight 8-Bit DACs with Output Amplifiers Operates with Single +5 V, +12 V or +15 V or Dual Supplies P Compatible (95 ns WR Pulse) No User Trims Required Skinny 24-Pin DlPs, SOIC, and 28-Terminal
DATASHEET HI5805. Features. Applications. Ordering Information. Pinout. 12-Bit, 5MSPS A/D Converter. FN3984 Rev 7.00 Page 1 of 12.
12-Bit, 5MSPS A/D Converter NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN3984 Rev 7.00 The HI5805
4 Channel 200 Ksps 12 Bit Adc With Sequencer In 16 Lead
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with 4 channel 200 ksps 12
HA Features. 650ns Precision Sample and Hold Amplifier. Applications. Functional Diagram. Ordering Information. Pinout
HA-50 Data Sheet June 200 FN2858.5 650ns Precision Sample and Hold Amplifier The HA-50 is a very fast sample and hold amplifier designed primarily for use with high speed A/D converters. It utilizes the
781/ /
781/329-47 781/461-3113 SPECIFICATIONS DC SPECIFICATIONS J Parameter Min Typ Max Units SAMPLING CHARACTERISTICS Acquisition Time 5 V Step to.1% 25 375 ns 5 V Step to.1% 2 35 ns Small Signal Bandwidth 15
ADC0808/ADC Bit µp Compatible A/D Converters with 8-Channel Multiplexer
ADC0808/ADC0809 8-Bit µp Compatible A/D Converters with 8-Channel Multiplexer General Description The ADC0808, ADC0809 data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital
Advantages of Analog Representation. Varies continuously, like the property being measured. Represents continuous values. See Figure 12.
Analog Signals Signals that vary continuously throughout a defined range. Representative of many physical quantities, such as temperature and velocity. Usually a voltage or current level. Digital Signals
1 AD5379 Price $67.75* www.analog.com/bulletins/dac 2 AD5426/AD5433/AD5443 BLOCK DIAGRAM V DD V REF AD5426 AD5432 AD5443 8-/10-/12-BIT R-2R DAC R R FB I OUT1 I OUT2 WIDE DYNAMIC, WIDE FREQUENCY RANGE DIN
Linear Technology Chronicle
Linear Technology Chronicle High Performance Analog Solutions from Linear Technology Vol. 13 No. 5 Industrial Process Control LT1790-2.5 LTC2054 REMOTE THERMOCOUPLE CH0 CH1 CH7 CH8 CH15 COM REF 16-CHANNEL
MCP6021/1R/2/3/4. Rail-to-Rail Input/Output, 10 MHz Op Amps. Features. Description. Typical Applications. Package Types.
Rail-to-Rail Input/Output, 10 MHz Op Amps Features Rail-to-Rail Input/Output Wide Bandwidth: 10 MHz (typ.) Low Noise: 8.7 nv/ Hz, at 10 khz (typ.) Low Offset Voltage: - Industrial Temperature: ±500 µv
Quad 12-Bit Digital-to-Analog Converter (Serial Interface)
Quad 1-Bit Digital-to-Analog Converter (Serial Interface) FEATURES COMPLETE QUAD DAC INCLUDES INTERNAL REFERENCES AND OUTPUT AMPLIFIERS GUARANTEED SPECIFICATIONS OVER TEMPERATURE GUARANTEED MONOTONIC OVER
SECTION 8 ADCs FOR SIGNAL CONDITIONING Walt Kester, James Bryant, Joe Buxton
SECTION 8 ADCs FOR SIGNAL CONDITIONING Walt Kester, James Bryant, Joe Buxton The trend in ADCs and DACs is toward higher speeds and higher resolutions at reduced power levels. Modern data converters generally
Precision Instrumentation Amplifier AD524
Precision Instrumentation Amplifier AD54 FEATURES Low noise: 0.3 μv p-p at 0. Hz to 0 Hz Low nonlinearity: 0.003% (G = ) High CMRR: 0 db (G = 000) Low offset voltage: 50 μv Low offset voltage drift: 0.5
SPT Bit, 250 MSPS A/D Converter with Demuxed Outputs
8-Bit, 250 MSPS A/D Converter with Demuxed Outputs Features TTL/CMOS/PECL input logic compatible High conversion rate: 250 MSPS Single +5V power supply Very low power dissipation: 425mW 350 MHz full power
8-Bit A/D Converter AD673 REV. A FUNCTIONAL BLOCK DIAGRAM
a FEATURES Complete 8-Bit A/D Converter with Reference, Clock and Comparator 30 s Maximum Conversion Time Full 8- or 16-Bit Microprocessor Bus Interface Unipolar and Bipolar Inputs No Missing Codes Over
Microprocessor-Compatible 12-Bit D/A Converter AD767*
a FEATURES Complete 12-Bit D/A Function On-Chip Output Amplifier High Stability Buried Zener Reference Fast 40 ns Write Pulse 0.3" Skinny DIP and PLCC Packages Single Chip Construction Monotonicity Guaranteed
CMOS 12-Bit Serial Input Multiplying DIGITAL-TO-ANALOG CONVERTER
CMOS 12-Bit Serial Input Multiplying DIGITAL-TO-ANALOG CONVERTER FEATURES 12-BICCURACY IN 8-PIN MINI-DIP AND 8-PIN SOIC FAST 3-WIRE SERIAL INTERFACE LOW INL AND DNL: ±1/2 LSB max GAIN ACCURACY TO ±1LSB
3 MSPS, 14-Bit SAR ADC AD7484
a FEATURES Fast Throughput Rate: 3 MSPS Wide Input Bandwidth: 40 MHz No Pipeline Delays with SAR ADC Excellent DC Accuracy Performance Two Parallel Interface Modes Low Power: 90 mw (Full Power) and.5 mw
OBSOLETE. 10-Bit, 170 MSPS D/A Converter AD9731
a FEATURES 17 MSPS Update Rate TTL/High Speed CMOS-Compatible Inputs Wideband SFDR: 66 db @ 2 MHz/ db @ 65 MHz Pin-Compatible, Lower Cost Replacement for Industry Standard AD9721 DAC Low Power: 439 mw
NI DAQPad -6020E Family Specifications
NI DAQPad -6020E Family Specifications This document lists the I/O terminal summary and specifications for the NI DAQPad-6020E family of devices. This family includes the following devices: NI DAQPad-6020E
HA Quad, 3.5MHz, Operational Amplifier. Description. Features. Applications. Ordering Information. Pinouts. November 1996
SEMICONDUCTOR HA4741 November 1996 Features Slew Rate...............................1.6V/µs Bandwidth................................MHz Input Voltage Noise...................... 9nV/ Hz Input Offset Voltage.........................mV
4 AD548. Precision, Low Power BiFET Op Amp
a FEATURES Enhanced Replacement for LF1 and TL1 DC Performance: A max Quiescent Current 1 pa max Bias Current, Warmed Up (AD8C) V max Offset Voltage (AD8C) V/ C max Drift (AD8C) V p-p Noise,.1 Hz to 1
CDK bit, 250 MSPS ADC with Demuxed Outputs
CDK1300 8-bit, 250 MSPS ADC with Demuxed Outputs FEATURES n TTL/CMOS/PECL input logic compatible n High conversion rate: 250 MSPS n Single +5V power supply n Very low power dissipation: 310mW n 220MHz
Amplifier Selection Guide 1Q 2003
R E A L W O R L D S I G N A L P R O C E S S I N G TM Amplifier Selection Guide 1Q 2003 Pulse Width Modulation Drivers Power Operational Amplifiers Integrating Voltage-Controlled Gain Logarithmic Isolation
Precision, 16 MHz CBFET Op Amp AD845
a FEATURES Replaces Hybrid Amplifiers in Many Applications AC PERFORMANCE: Settles to 0.01% in 350 ns 100 V/ s Slew Rate 12.8 MHz Min Unity Gain Bandwidth 1.75 MHz Full Power Bandwidth at 20 V p-p DC PERFORMANCE:
Microprocessor-Compatible 12-Bit D/A Converter AD667*
a FEATURES Complete 12-Bit D/A Function Double-Buffered Latch On Chip Output Amplifier High Stability Buried Zener Reference Single Chip Construction Monotonicity Guaranteed Over Temperature Linearity
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
HA-2520, HA-2522, HA-2525
HA-, HA-, HA- Data Sheet September 99 File Number 9. MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-// comprise a series of operational amplifiers delivering an unsurpassed
16-Bit, 135ksps, Single-Supply ADCs with Bipolar Analog Input Range
19-2755; Rev 1; 8/3 16-Bit, 135ksps, Single-Supply ADCs with General Description The 16-bit, low-power, successiveapproximation analog-to-digital converters (ADCs) feature automatic power-down, a factory-trimmed
4 AD548. Precision, Low Power BiFET Op Amp REV. D. CONNECTION DIAGRAMS Plastic Mini-DIP (N) Package and SOIC (R)Package
a FEATURES Enhanced Replacement for LF441 and TL61 DC Performance: 2 A max Quiescent Current 1 pa max Bias Current, Warmed Up (AD48C) 2 V max Offset Voltage (AD48C) 2 V/ C max Drift (AD48C) 2 V p-p Noise,.1
Dual 8-Bit 50 MSPS A/D Converter AD9058
a FEATURES 2 Matched ADCs on Single Chip 50 MSPS Conversion Speed On-Board Voltage Reference Low Power (
RC4741 General Purpose Operation Amplifier
General Purpose Operation Amplifier www.fairchildsemi.com Features Unity gain bandwidth 3. MHz High slew rate 1.6 V/mS Low noise voltage 9 nv/öhz Input offset voltage. mv Input bias current 6 na Indefinite
CMOS 8-Bit Buffered Multiplying DAC AD7524
a FEATURES Microprocessor Compatible (6800, 8085, Z80, Etc.) TTL/ CMOS Compatible Inputs On-Chip Data Latches Endpoint Linearity Low Power Consumption Monotonicity Guaranteed (Full Temperature Range) Latch
AOUT AIN- AIN+ GND 1 AOUT 2 AIN- 3 AIN+
www.dalsemi.com FEATURES High Slew Rate: V/µs High Gain Bandwidth: 6.5 MHz Supply Voltage Range.5 to 5.5V Rail-to-Rail Output Swing.75 ma Supply Current per Channel ORDERING INFORMATION Part Number Description
OBSOLETE. 16-Bit/18-Bit, 16 F S PCM Audio DACs AD1851/AD1861
a FEATURES 0 db SNR Fast Settling Permits 6 Oversampling V Output Optional Trim Allows Super-Linear Performance 5 V Operation 6-Pin Plastic DIP and SOIC Packages Pin-Compatible with AD856 & AD860 Audio
CDK bit, 250 MSPS A/D Converter with Demuxed Outputs
CDK1301 8-bit, 250 MSPS A/D Converter with Demuxed Outputs FEATURES n TTL/CMOS/PECL input logic compatible n High conversion rate: 250 MSPS n Single +5V power supply n Very low power dissipation: 425mW
LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453
LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5
3 MSPS, 12-Bit SAR ADC AD7482
3 MSPS, 12-Bit SAR ADC AD7482 FEATURES Fast throughput rate: 3 MSPS Wide input bandwidth: 40 MHz No pipeline delays with SAR ADC Excellent dc accuracy performance 2 parallel interface modes Low power:
16-Bit, 135ksps, Single-Supply ADCs with Bipolar Analog Input Range
19-2675; Rev 1; 1/3 16-Bit, 135ksps, Single-Supply ADCs with General Description The 16-bit, low-power, successive-approximation analog-to-digital converters (ADCs) feature automatic power-down, a factorytrimmed
Specifications. PCI Bus. Analog Input Input Characteristics
Specifications A This appendix lists the specifications of the NI 6034E/6035E/6036E. These specifications are typical at 25 C unless otherwise noted. The first section provides the specifications for the
SAMPLE/HOLD AMPLIFIER
SAMPLE/HOLD AMPLIFIER FEATURES FAST (µs max) ACQUISITION TIME (1-bit) APERTURE JITTER: 00ps POWER DISSIPATION: 300mW COMPATIBLE WITH HIGH RESOLUTION A/D CONVERTERS ADC7, PCM75, AND ADC71 DESCRIPTION The
NJM4582 AUDIO DUAL OPERATIONAL AMPLIFIER
AUDIO DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring noiseless,
LF411JAN Low Offset, Low Drift JFET Input Operational Amplifier
LF411JAN Low Offset, Low Drift JFET Input Operational Amplifier General Description This device is a low cost, high speed, JFET input operational amplifier with very low input offset voltage and guaranteed
Data Converters. Технически семинар 21.Октомври.2016 гр. Хисаря 1
Data Converters Технически семинар 21.Октомври.2016 гр. Хисаря 1 Contents: Short product line update ADC architectures - SAR - Pipeline - Flash - Delta-Sigma / Modulator and Decimation ADC Oversampling
DATASHEET HI1175. Features. Ordering Information. Applications. Pinout. 8-Bit, 20MSPS, Flash A/D Converter. FN3577 Rev 8.
8-Bit, 2MSPS, Flash A/D Converter Pb-Free and RoHS Compliant DATASHEET FN377 Rev 8. The HI117 is an 8-bit, analog-to-digital converter built in a 1.4 m CMOS process. The low power, low differential gain
Analog-to-Digital Converter (ADC) And Digital-to-Analog Converter (DAC)
1 Analog-to-Digital Converter (ADC) And Digital-to-Analog Converter (DAC) 2 1. DAC In an electronic circuit, a combination of high voltage (+5V) and low voltage (0V) is usually used to represent a binary
34 MHz, CBFET Fast Settling Op Amp AD843
a FEATURES AC PERFORMANCE Unity Gain Bandwidth: 34 MHz Fast Settling: 135 ns to 0.01% Slew Rate: 250 V/ s Stable at Gains of 1 or Greater Full Power Bandwidth: 3.9 MHz 34 MHz, CBFET Fast Settling Op Amp
Wideband, High Output Current, Fast Settling Op Amp AD842
a FEATURES AC PERFORMAE Gain Bandwidth Product: 8 MHz (Gain = 2) Fast Settling: ns to.1% for a V Step Slew Rate: 375 V/ s Stable at Gains of 2 or Greater Full Power Bandwidth: 6. MHz for V p-p DC PERFORMAE
ADC0808/ADC Bit µp Compatible A/D Converters with 8-Channel Multiplexer
ADC0808/ADC0809 8-Bit µp Compatible A/D Converters with 8-Channel Multiplexer General Description The ADC0808, ADC0809 data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital
CDK bit, 25 MSPS 135mW A/D Converter
CDK1304 10-bit, 25 MSPS 135mW A/D Converter FEATURES n 25 MSPS converter n 135mW power dissipation n On-chip track-and-hold n Single +5V power supply n TTL/CMOS outputs n 5pF input capacitance n Tri-state
DESCRIPTION FEATURES APPLICATIONS. LTC1590 Dual Serial 12-Bit Multiplying DAC TYPICAL APPLICATION
FEATRES DNL and INL Over Temperature: ±.LSB Max Gain Error: ±LSB Max Low Supply Current: µa Max -Quadrant Multiplication Power-On Reset Asynchronous Clear Input Daisy-Chain -Wire Serial Interface -Pin
Dual Precision, Low Cost, High Speed, BiFET Op Amp AD712
a FEATURES Enhanced Replacements for LF12 and TL82 AC PERFORMANCE Settles to.1% in 1. ms 16 V/ s min Slew Rate (J) 3 MHz min Unity Gain Bandwidth (J) DC PERFORMANCE.3 mv max Offset Voltage: (C) V/ C max
TYPICAL APPLICATION LTC1591/LTC1591-1
FEATURES True -Bit Performance Over Industrial Temperature Range DNL and INL: LSB Max On-Chip 4-Quadrant Resistors Allow Precise V to V, V to V or ±V Outputs Pin Compatible 4- and -Bit Parts Asynchronous
Fundamentals of Data Converters. DAVID KRESS Director of Technical Marketing
Fundamentals of Data Converters DAVID KRESS Director of Technical Marketing 9/14/2016 Analog to Electronic Signal Processing Sensor (INPUT) Amp Converter Digital Processor Actuator (OUTPUT) Amp Converter
DATASHEET HI5660. Features. Ordering Information. Applications. Pinout. 8-Bit, 125/60MSPS, High Speed D/A Converter. FN4521 Rev 7.
DATASHEET HI5660 8-Bit, 125/60MSPS, High Speed D/A Converter The HI5660 is an 8-bit, 125MSPS, high speed, low power, D/A converter which is implemented in an advanced CMOS process. Operating from a single
CDK bit, 250 MSPS A/D Converter with Demuxed Outputs
Amplify the Human Experience CDK1301 8-bit, 250 MSPS A/D Converter with Demuxed Outputs features n TTL/CMOS/PECL input logic compatible n High conversion rate: 250 MSPS n Single +5V power supply n Very
NI 6013/6014 Family Specifications
NI 6013/6014 Family Specifications This document lists the I/O terminal summary and specifications for the NI 6013/6014 family of devices. This family includes the following devices: NI PCI-6013 NI PCI-6014
DATASHEET HA Features. Applications. Pinout. Ordering Information. 3.2µs Sample and Hold Amplifiers. FN2856 Rev.7.
3.2µs Sample and Hold Amplifiers NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888TERSIL or www.intersil.com/tsc DATASHEET FN2856 Rev.7.00 The HA-2420
Tel: Fax:
B Tel: 78.39.4700 Fax: 78.46.33 SPECIFICATIONS (T A = +5 C, V+ = +5 V, V = V or 5 V, all voltages measured with respect to digital common, unless otherwise noted) AD57J AD57K AD57S Model Min Typ Max Min
9-Bit, 30 MSPS ADC AD9049 REV. 0. Figure 1. Typical Connections FUNCTIONAL BLOCK DIAGRAM
a FEATURES Low Power: 00 mw On-Chip T/H, Reference Single +5 V Power Supply Operation Selectable 5 V or V Logic I/O Wide Dynamic Performance APPLICATIONS Digital Communications Professional Video Medical
Low Cost Instrumentation Amplifier AD622
a FEATURES Easy to Use Low Cost Solution Higher Performance than Two or Three Op Amp Design Unity Gain with No External Resistor Optional Gains with One External Resistor (Gain Range 2 to ) Wide Power
4-Channel, 16-Bit, 200 ksps Data Acquisition System AD974
a FEATURES Fast 16-Bit ADC with 200 ksps Throughput Four Single-Ended Analog Input Channels Single 5 V Supply Operation Input Ranges: 0 V to 4 V, 0 V to 5 V and 10 V 120 mw Max Power Dissipation Power-Down
SMP04 SPECIFICATIONS ELECTRICAL CHARACTERISTICS
SMP4 SPECIFICATIONS ELECTRICAL CHARACTERISTICS (@ = +. V, = DGND = V, R L = No Load, T A = Operating Temperature Range specified in Absolute Maximum Ratings, unless otherwise noted.) Parameter Symbol Conditions
10-Bit, 40 MSPS/60 MSPS A/D Converter AD9050 REV. B. Figure 1. Typical Connections FUNCTIONAL BLOCK DIAGRAM
a FEATURES Low Power: 1 mw @ 0 MSPS, mw @ 0 MSPS On-Chip T/H, Reference Single + V Power Supply Operation Selectable V or V Logic I/O SNR: db Minimum at MHz w/0 MSPS APPLICATIONS Medical Imaging Instrumentation
FUNCTIONAL BLOCK DIAGRAM DIGITAL VIDEO ENGINE
FEATURES CMOS DUAL CHANNEL 10bit 40MHz DAC LOW POWER DISSIPATION: 180mW(+3V) DIFFERENTIAL NONLINEARITY ERROR: 0.5LSB SIGNAL-to-NOISE RATIO: 59dB SPURIOUS-FREE DYNAMIC RANGE:69dB BUILD-IN DIGITAL ENGINE
12-Bit, Low-Power, Dual, Voltage-Output DAC with Serial Interface
19-2124; Rev 2; 7/3 12-Bit, Low-Power, Dual, Voltage-Output General Description The dual,12-bit, low-power, buffered voltageoutput, digital-to-analog converter (DAC) is packaged in a space-saving 8-pin
MCP601/1R/2/3/4. 2.7V to 6.0V Single Supply CMOS Op Amps. Features. Description. Typical Applications. Available Tools.
MCP60/R///4.7V to 6.0V Single Supply CMOS Op Amps Features Single-Supply:.7V to 6.0V Rail-to-Rail Output Input Range Includes Ground Gain Bandwidth Product:.8 MHz Unity-Gain Stable Low Quiescent Current:
CMOS Sigma-Delta Modulator AD7720
a FEATURES 12.5 MHz Master Clock Frequency V to +2.5 V or 1.25 V Input Range Single Bit Output Stream 9 Dynamic Range Power Supplies: AVDD, DVDD: +5 V 5% On-Chip 2.5 V Voltage Reference 28-Lead TSSOP VIN(+)
CMOS 12-Bit Buffered Multiplying DAC AD7545A
a FEATURES Improved Version of AD7545 Fast Interface Timing All Grades 12-Bit Accurate 20-Lead DIP and Surface Mount Packages Low Cost CMOS 12-Bit Buffered Multiplying DAC AD7545A FUNCTIONAL BLOCK DIAGRAM
Low-Power, Low-Glitch, Octal 12-Bit Voltage- Output DACs with Serial Interface
9-232; Rev 0; 8/0 Low-Power, Low-Glitch, Octal 2-Bit Voltage- Output s with Serial Interface General Description The are 2-bit, eight channel, lowpower, voltage-output, digital-to-analog converters (s)
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V max Offset Voltage V/ C max Offset Voltage Drift 5 pa max Input Bias Current.2 pa/ C typical I B Drift Low Noise.5 V p-p typical Noise,. Hz to Hz Low Power 6 A max Supply
LT MHz, 30V/µs 16-Bit Accurate A V 2 Op Amp. Description. Features. Applications. Typical Application
Features n Stable in Gain A (A = ) n MHz Gain Bandwidth Product n /μs Slew Rate n Settling Time: 8ns ( Step, ) n Specified at and Supplies n Low Distortion, 9.dB for khz, P-P n Maximum Input Offset oltage:
CD V Low Power Subscriber DTMF Receiver. Description. Features. Ordering Information. Pinouts CD22204 (PDIP) TOP VIEW. Functional Diagram
Semiconductor January Features No Front End Band Splitting Filters Required Single Low Tolerance V Supply Three-State Outputs for Microprocessor Based Systems Detects all Standard DTMF Digits Uses Inexpensive.4MHz
12-Bit, 4-Channel Serial Output Sampling ANALOG-TO-DIGITAL CONVERTER
2-Bit, 4-Channel Serial Output Sampling ANALOG-TO-DIGITAL CONVERTER FEATURES SINGLE SUPPLY: 2.7V to 5V 4-CHANNEL SINGLE-ENDED OR 2-CHANNEL DIFFERENTIAL INPUT UP TO 200kHz CONVERSION RATE ± LSB MAX INL
CA5260, CA5260A. 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output. Features. Description.
, A November 1996 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output Features Description MOSFET Input Stage provides - Very High Z I = 1.5TΩ (1.5 x 10 12 Ω) (Typ) - Very Low
OBSOLETE. High Performance, BiFET Operational Amplifiers AD542/AD544/AD547 REV. B
a FEATURES Ultralow Drift: 1 V/ C (AD547L) Low Offset Voltage: 0.25 mv (AD547L) Low Input Bias Currents: 25 pa max Low Quiescent Current: 1.5 ma Low Noise: 2 V p-p High Open Loop Gain: 110 db High Slew
Complete 12-Bit 5 MSPS Monolithic A/D Converter AD871
a FEATURES Monolithic -Bit 5 MSPS A/D Converter Low Noise: 0.7 LSB RMS Referred to Input No Missing Codes Guaranteed Differential Nonlinearity Error: 0.5 LSB Signal-to-Noise and Distortion Ratio: 68 db
Eliminate Pipeline Headaches with New 12-Bit 3Msps SAR ADC by Dave Thomas and William C. Rempfer
A new 12-bit 3Msps ADC brings new levels of performance and ease of use to high speed ADC applications. By raising the speed of the successive approximation (SAR) method to 3Msps, it eliminates the many