POWER. Rethinking Possibilities, Reshaping Lives
|
|
|
- Natalie Doyle
- 5 years ago
- Views:
Transcription
1 POWER Rethinking Possibilities, Reshaping Lives
2 General Information Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules Wire/Pin Driver Modules Lever Arm Motor Unit (LAMU) Modules Saw Modules p. 2 p. 3 p. 4 p. 5 p. 6 p. 7 p. 8 p. 9 OsteoPower Irrigation Accessories OsteoPower Miscellaneous Accessories Burs & Drills Sagittal and Oscillating Saw Blades Reciprocating Saw Blades p. 10 p. 11 p p. 16 p. 17 2
3 Name: Pager: Cell: General Information OsteoMed LP 3885 Arapaho Road Addison, TX U.S.A. Customer Service: Main: Fax:
4 INTRODUCTION The OsteoPower Modular Handpiece System incorporates advanced technology in the design and manufacturing of surgical power tools. From the unique ergonomic shape of the motor unit to the high power DC brushless motor and modular handpiece components, OsteoPower combines user friendly features with incredible performance and dependability. General Information SYSTEM COMPONENTS The OsteoPower System is comprised of Handpiece Modules, Motor Unit(s) and Cord(s), a Power Control Console (with or without irrigation), and Footswitches as well as many other accessories. DESCRIPTIONS Power Control Console (PCC): Electronic Control and Power Supply unit for Motor Unit(s) Motor Unit (MU): A high speed, high torque motor with a radel housing which is connected to the PC and converts power to the drills, saws, or drivers. Footswitch: A foot control unit which is connected to the PCC to control the speed and direction of the MU. 1:1 Straight Drill: A high speed module which is attached to the MU for cutting, drilling, and deburring. 1:1/20:1/80:1 Contra Angle Drills: Angular drills with or without gear reduction for cutting, drilling, and tapping. 4:1 Universal Pilot Drill: A low speed module for pilot drilling that will accept OsteoMed, J-latch, and long D-latch shank drills. Reciprocating Saw: A module for cutting with reciprocating motion. Oscillating Saw: A module for cutting with oscillating motion. V.R.O. Saw: A module for cutting with oscillating motion. Sagittal Saw: A module for cutting with sagittal motion. Wire/Pin Driver: A slow speed module to drive different sizes of wire or pins and for drilling. 4
5 Part Number Description Power Control Console 2i with Irrigation Power Control Console 2 without Irrigation BMF Footswitch Power Control Console
6 Power Control Console Part Number Description Hand Controlled Motor Unit and Cord Lever Arm Motor Unit and Cord (LAMU) Series II Low Profile Motor Unit (Footswitch Only)
7 Part Number Description Series III Straight Drill :1 Contra Angle Drill :1 Contra Angle Drill :1 Contra Angle Drill, Low Speed :1 Universal Pilot Drill : Replacement Spray Clip Handpiece Modules : Replacement Spray Clip : Replacement Spray Clip : :1 7
8 Part Number Description Wire/Pin Driver, Body Only Wire/Pin Driver Module with Trigger, High Torque Jacob s Chuck ( Included) Jacob s Chuck Key A.O. Chuck w/ trigger Handpiece Modules
9 Part Number Description Wire/Pin Driver Body (LAMU) Wire/Pin Driver (LAMU) Jacobs Chuck (LAMU) A.O. Chuck (LAMU) Jacobs Key Handpiece Modules
10 Part Number Description Reciprocating Saw Sagittal Saw Oscillating Saw V.R.O. Saw OsteoGraftTM Soft Tissue Guard Attachment (Attaches to the Series Three Straight Drill P/N ) Handpiece Modules
11 Part Number Description IV Pole for 2i (One included with every OsteoPowerTM 2i with Irrigation) Contra Angle Irrigation Nozzle Contra Angle Irrigation Nozzle (LAMU) Single Silicone Tubing Set, 12 ft. (Clips Included) Dual Silicone Tubing Set, 12 ft. (Clips Included) Autoclavable Tubing Clips, 12/bag (not shown) Contra Angle Irrigation Tubing (1 Foot Section) Bifurcated Contra Irrigation Tubing, Internal / External Reciprocating Saw Irrigation Nozzle Reciprocating Saw Irrigation Nozzle (LAMU) Series III Straight Drill Irrigation Nozzle Series III Straight Drill Irrigation Nozzle (LAMU) OsteoGraftTM Irrigation Tubing Irrigation Bag Spike, Autoclavable Accessories Irrigation Accessories for , & Contra Angles Irrigation Y-Manifold (3 PCS) Internal Bur Cooling Tube Spray Clip for & Spray Clip for Clip Not Sold Separately Clip Not Sold Separately or (LAMU) or (LAMU) Clip Not Sold Separately or (LAMU) 11
12 Part Number or (LAMU) or (LAMU) Accessories Description Wrench, 4:1 Bur Guard and Contra Angles Reciprocating Saw Wrench Set W/P Driver Silicone Nose Lubricant & Conditioner Cleaning Spray Aerosol Nozzle Lubrication Sleeve for Series III Straight Drill Lubrication Sleeve for Universal Drill W/P Driver/Jacobs Chuck/AO Chuck Nozzle Additional Accessories (not shown): Rolling Briefcase OsteoPowerTM autoclave tray Hospital Grade AC Power Cord AC Power Cord (EUROPE) AC Power Cord (AUSTRALIA) AC Power Cord (ITALY) AC Power Cord (UNITED KINGDOM) AC Power Cord (JAPAN) Short Bur Guard, 4:1 Universal Pilot Drill Medium Bur Guard, 4:1 Universal Pilot Drill Long Bur Guard, 4:1 Universal Pilot Drill For or
13 1:1 Straight Drill (5 Pack) SP 6 Flute- Tapered Tip Length-4.2mm 1.2mm Wide # (5 Pack) SP 6 Flute-Tapered Tip Length-4.4mm 1.6mm Wide # (5 Pack) SP 6 Flute-Tapered Bur Length- 59mm Tip Length-4.75mm 2.1mm Wide # (5 Pack) 6 Flute-Straight Tip Length-4.2mm 1.2mm Wide #701 Diamond Burs Fissure Burs (5 Pack) 6 Flute-Straight Tip Length-4.4mm 1.6mm Wide # (5 Pack) 6 Flute-Long Shaft Round Tip Bur Length-65mm Tip Length-4.5mm 2.1mm Wide # SP 3.0mm Dia. Round, Diamond Grit: (5 Pack) SP 6 Flute-Round Tip Bur Length- 59mm Tip Length-4.75mm 2.1mm Wide # (5 Pack) SP 6 Flute-Long Tip Tip Length-6.0mm 1.6mm Wide # SP 3.5mm Dia. Round, Diamond Bur Length- 59mm Grit: (5 Pack) SP 6 Flute-Long Shaft Bur Length-65mm Tip Length-4.1mm 1.6mm Wide # (5 Pack) SP 6 Flute-Long Tip Tip Length-7.5mm 2.1mm Wide # SP 4.0mm Dia. Round, Diamond Bur Length 59mm Grit: (5 Pack) SP 6 Flute-Long Shaft But Length-65mm Tip Length-4.75mm 2.1mm Wide # (5 Pack) SP 6 Flute Long, Round Tip Tip Length-7.5mm 2.1mm Wide # SP 4.5mm Dia. Round, Diamond Bur Length- 59mm Grit: Bur, Blade Guide SP 6 Flute 0.5mm Dia. #1/4 Round SP 6 Flute 1.4mm Dia. #4 Round (5 Pack) SP 6 Flute 1.8mm Dia. #6 Round (5 Pack) SP 8 Flute 2.3mm Dia. #8 Round Round Burs (5 Pack) SP 8 Flute-Long Shaft Bur Length-65mm 2.3mm Dia. #8 Round (5 Pack) SP 8 Flute 2.7mm Dia. #10 Round SP 12 Flute 4.0mm Dia. Round SP 16 Flute 5.0mm Dia. Round SP 16 Flute 6.0mm Dia. Round SP 16 Flute 7.0mm Dia. Round Oval Burs SP 10 Flute 4.0mm Wide Oval SP 10 Flute-Long Shaft Bur Length-69mm 4.0mm Wide Oval SP = Single Sterile Pack 13
14 SP Wire Pass Drill Stainless Steel Bur Length-69mm Tip Length-20.0mm Thru Hole Dia.-.46mm 1.0mm Diameter SP Wire Pass Drill Stainless Steel Bur Length-69mm Tip Length-20.0mm Thru Hole Dia.-.84mm 1.5mm Diameter Shannon Bur SP Barrel Bur Bur Length-63mm Tip Length-12mm 5.9mm Diameter SP Wire Pass Drill Stainless Steel Bur Length-69mm Tip Length-20.0mm Thru Hole Dia.-.97mm 2.0mm Diameter Universal Disc Adapter Pineapple Bur SP Lindemann Bur Clockwise Cutting Stainless Steel Long Shaft Bur Length-84mm Tip Length-22.3mm 1.6mm Diameter Barrel Bur SP Lindemann Bur Clockwise Cutting Stainless Steel Bur Length-69mm Tip Length-22.3mm 1.6mm Diameter SP Pineapple Bur Bur Length-65mm Tip Length-11mm 6.0mm Diameter SP Shannon Bur Stainless Steel Bur Length-82mm Tip Length-12mm 2.3mm Diameter OsteoGraft Disc Adapter Stainless Steel Length-61mm Cutting Wheel Wire Pass Drill SP Swanson Reamer Stainless Steel Bur Length-71mm Pilot Tip Length-4mm Flute Length-9.4mm 4.0mm Diameter Fissure Round Contra Angle Drills mm # 8 Round 5 Pack mm # Pack mm #703 Long 5 Pack For 1.2mm Screw Drill Bit Bur, Blade Guide Lindemann Burs Swanson Pilot Point 1:1 Straight Drill For 1.6mm Screw For 2.0/2.4mm Mini/Maxi Screw SP = Single Sterile Pack SP OsteoGraft Cutting Wheel Stainless Steel 56 Teeth 12.6mm OD 0.25mm Thick SP 0.5mm Thick 4mm Cut Depth
15 Pilot Drill Diameter 4:1 Universal Pilot Drill 1:1 Straight Drill - Contra Angle Drills mm For 1.2mm Screw For 1.6mm Screw mm 1.0mm, 4mm Stop 1.0mm 0.9mm 0.9mm, 3mm Stop 0.9mm, 4mm Stop 0.9mm, 5mm Stop 1.0mm 1.0mm, 4mm Stop 1.0mm, 8mm Stop 0.9mm, 4mm Stop 1.0mm, 12mm Stop 1.3mm, 12mm Stop 1.3mm, 16mm Stop 1.3mm 1.1mm, 4mm Stop 1.1mm, 6mm Stop 1.3mm, 8mm Stop, BFS 1.3mm, 6mm Stop, BFS 1.3mm, 4mm Stop, BFS 1.3mm, 12mm Stop 1.3mm, 16mm Stop 1.3mm, 4mm Stop J-Latch Power D-Latch J-Latch Power Bur, Blade Guide mm, Extended Length mm D-Latch 15
16 Pilot Drill Diameter 4:1 Universal Pilot Drill 1:1 Straight Drill - Contra Angle Drills mm mm, Long mm, Long Calibrated, Mandible 1.6mm, 6mm Stop 1.6mm, 4mm Stop Power mm, Mandible mm Bur, Blade Guide For 2.0mm Screw mm 1.6mm, Long 1.6mm, 6mm Stop 1.6mm, 4mm Stop 1.6mm, Long Calibrated 1.6mm, Long, Mandible System J-Latch mm, 16mm Stop 1.6mm, 6mm Stop D-Latch mm mm, Long 1.8mm Pilot Drill 2.0mm Pilot Drill Power For 2.4mm Screw mm, Long, Mandible System 2.0mm, 12mm Stop 2.0mm, Long 2.0mm, Long Calibrated J-Latch mm, Long Mandible System mm, 16mm Stop 2.0mm, Calibrated 2.0mm, 10mm D-Latch 16
17 Sagittal / Oscillating Saw Blades V.R.O. Saw Blades SP Width: 4mm / Cut Depth: 25mm SP Width: 10mm / Cut Depth: 27mm SP Width: 10mm / Cut Depth: 10mm SP Width: 10mm / Cut Depth: 28mm Oscillating / Sagittal SP Width: 6mm / Cut Depth: 10mm SP Width: 6mm / Cut Depth: 14mm SP Width: 10mm / Cut Depth: 29mm SP Width: 10mm / Cut Depth: 39mm Bur, Blade Guide SP Width: 6mm / Cut Depth: 19mm SP Width: 19mm / Cut Depth: 29mm SP Width: 10mm / Cut Depth: 19mm SP Width: 7mm / Cut Depth: 18mm SP Blade, Sag/Osc 6mm/5mm, Sterile SP Blade, Sag/Osc 6mm/26mm, Sterile Vertical Ramus Osteotomy SP 7mm, 0.6mm Thick SP 12mm, 0.6mm Thick SP 12mm, 0.38mm Thick SP = Single Sterile Pack 17
18 Reciprocating Saw Blades Bur, Blade Guide Inferior Osteotomy Blades Rasp Tapered Straight Arched SP Length: 12mm / Thickness: 0.6mm SP Length: 17mm / Thickness: 0.6mm SP Length: 14.5mm / Thickness: 0.4mm SP Length: 15.7mm / Thickness: 0.4mm SP Length: 32.7mm / Thickness: 0.4mm SP Length: 26.3mm / Thickness: 0.4mm SP Length: 26.3mm / Thickness: 0.4mm SP Length: 26.3mm / Thickness: 0.6mm SP Length: 26.3mm / Thickness: 0.6mm SP Cross Cut SP Cross Cut, Short SP Right and Left Side Included 18 SP = Single Sterile Pack
19
20 POWER Rethinking Possibilities, Reshaping Lives P/N Rev.G
POWER. Rethinking Possibilities, Reshaping Lives
POWER Rethinking Possibilities, Reshaping Lives Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules Wire/Pin Driver Modules
Small Bone Power System
236041 Zimmer B 7/10/06 3:14 PM Page 1 Manufactured by: Distributed by: 236041 Zimmer B 7/10/06 3:14 PM Page 2 236041 Zimmer B 7/10/06 3:14 PM Page 3 Contents Introduction 2 High Speed Drill 3 Medium Speed
Aesculap Power Systems HiLAN XS
Aesculap Power Systems HiLAN XS Pneumatic High Speed Power System HiLAN XS size redefined HiLAN XS Micro design perfection in every detail Revolutions start with small things. The extremely small HiLAN
Total Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM NEURO SPINE ENT SPORTS MED PLASTICS GEN.
NEURO SPINE ENT SPORTS MED PLASTICS GEN. ORTHOPEDICS ORAL/MAX Total Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM Attachments INNOVATION WITH ATTITUDE Burs UNIVERSAL
microspeed uni Aesculap Get the speed you need Aesculap Power Systems
Aesculap Get the speed you need microspeed uni Aesculap Power Systems Relax the power is in your hand. Ergonomic, lightweight and quiet - exceptional! With a weight of under g and an out stan ding design,
MicroSurgical Power Tools
MicroSurgical Power Tools C.O.R.E Consolidated Operating Room Equipment Power Simplicity Versatility Customized Performance Standardization MicroSurgical Power Tools Consolidated Operating Room Equipment
Cutting Accessories Micro Burs
Cutting Accessories Micro Burs CORE Micro Drill 5400-15 CORE Micro Drill Micro Drill Attachments 5100-15-250 MD Series Straight Attachment 5100-15-270 MD Series Long Straight Attachment 5100-15-252 MD
state of mind, state of the art
TOTAL SURGICAL SYSTEM state of mind, state of the art Powerful Partners Powerful Partners NSK Handpieces and The Human Hand Speed and torque properties are often considered the main criteria for judging
powerful, smart & reliable
HIGH PERFORMANCE BRUSHLESS MICROMOTOR WITH PRECISE TORQUE CONTROL powerful, smart & reliable Powerful Partners PRM014E Ver.2 10.04.02.A Contents NSK COMPANY INTRODUCTION P2 3 PRODUCT LINE UP P4 5 CONTROL
Aesculap Power Systems microspeed uni. Get the speed you need
Aesculap Power Systems microspeed uni Get the speed you need Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone in small
Straight and angled handpieces for surgery
Straight and angled handpieces for surgery Surgical instruments - technical characteristics PM RM 1122 / 1:1 ratio REF 1600206-001 REF 1600340-001 REF 1600341-001 PM AM 10121 / Reducing ratio of 10 REF
Primado2 Product Lineup
PR-M033E Ver.1 12.04.015.A Primado2 Product Lineup Slim Motor Series Micro Bone Saw Series High Torque Motor Series Primado2 Slim Motor P12 Primado2 Micro Bone Saw P32-34 Primado2 High Torque Motor P20
Aesculap ELAN 4. Surgeon`s Darlings for Precision, Performance and Pleasure.
Surgeon`s Darlings for Precision, Performance and Pleasure. Surgeon s Darlings for Precision and Performance Engineered in Germany. As a surgeon, I need to do the best job possible in order to maintain
Straight and contra-angled handpieces
Microsaws The saws are provided with extra-thin blades which reduce bone loss to a minimum. The sagittal, osseoscalpel and oscillating saws are equipped with an irrigation tube integrated in the hand-grip.
Powered Instruments System Product Catalog
Powered Instruments System Product Catalog MicroPower Saw Micro100 Surgairtome M-CLASS BLADES Batteries Contents Ordering Information... 2 Product Support... 3 Product Support and Service Programs... 4
Omega Surgical Contact Info. Table of Contents. Introduction 1.0. Omega Signature Series Burs 1.1. Omega UltraLite Burs 2.1
Surgical Contact Info Table of Contents Section Page Introduction 1.0 TM Signature Series Burs 1.1 UltraLite Burs 2.1 DiaMax Oscillating s 3.1 Medtronic Xomed Replacement Burs 4.1 Linvatec /Zimmer Replacement
53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
Interproximal Reduction
Interproximal Reduction 10.0 mm 10.0 mm 1.0 mm 0.39 mm Fine Grit Long Item #: 8859-31-010 1.0 mm 0.45 mm Medium Grit Long (Blue Color ID) Item #: 859-31-010 1 pack... $ 46.95/pk 3 or more... $ 44.95/pk
Table of Contents 2-6. Introduction. Indications Surgical Technique. Ordering Information 15-24
Table of Contents Introduction Product information ExtremiFix Midsize Large Screw Offering Headless Screw Characteristics Design Features & Benefits Instrumentation Technical Details Calibrated Drill Bits
Synea Vision contra-angle and straight handpieces Dental handpieces with ceramic ball bearings (WK-99 / WK-93) and compact glass rod light
Restoration & Prosthetics Synea Vision turbine handpieces Dental turbines integral ceramic ball bearings and optimum cooling of 5-fold spray with Roto Quick connection with Multiflex connection TK-00 L
i'"fi fiil S"'sii"l... Micro 700'* Surgery System, Tl;.e Advanced, reliable instruments for precision small-bone surgery.
Micro 700'* Surgery System, Tl;.e i'"fi fiil S"'sii"l... Advanced, reliable instruments for precision small-bone surgery. Lightweight and perfectly balanced, each Micro 100 ' handpiece gives you better
Special Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
Powered Instruments System Product Catalog. Hall LITHIUM BATTERIES M-CLASS BLADES HALL SMALL BONE HANDPIECE SURGAIRTOME TWO
Hall Powered Instruments System Product Catalog HALL MICROPOWER + HALL MICRO 100 SMALL BONE HANDPIECE SURGAIRTOME TWO M-CLASS BLADES HALL LITHIUM BATTERIES Contents Ordering Information...2 Product Support...3
OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 OSADA, INC.
OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 NEW Electric BRUSHLESS Laboratory MICROMOTOR Handpiece System SYSTEM FOR ORAL with SURGERY BRUSHLESS AND IMPLANT MICROMOTOR PREPARATIONS OSADA, INC. 30008436
4.0 CANNULATED SCREW SYSTEM
Surgical Technique 4.0 CANNULATED SCREW SYSTEM Surgical technique Table of contents Design features...2 Indications...3 Surgical technique...4 Inserting the screw...4 Extracting the screw...6 Catalog
TRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
TABLE OF CONTENTS TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...
Rev. 8 March 2005 SUBJECT TABLE OF CONTENTS PAGE TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...5 POLISHER OPERATION...6 MICROMOTOR
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
Technique Guide. 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
Rush Machinery, Inc. Specification- Model 382S series Drill & Tool Grinders
I. Operational Features A. Drill & Tool Size Capacities 1. Drill Diameter Range: 3/16 (5mm) to 3-1/8 (80mm) 2. Tool Shanks: Straight Shanks: 3/16 (5mm) to 3-1/8 (80mm) diameter Morse Taper Shanks: to #6
Metals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
Rush Machinery, Inc. Specification- Model 252 series Drill & Tool Grinders
I. Operational Features A. Drill & Tool Size Capacities 1. Drill Diameter Range: 3/32 (2.5 mm) to 2 (51 mm) 2. Tool Shanks: Straight Shanks: 3/32 (2.5mm) to 2 (51mm) diameter Morse Taper Shanks: to #5
HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE. a quality product built for sustained accuracy lasting performance
D HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE a quality product built for sustained accuracy lasting performance MANEX HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINES Mod. No. 1 - No. - No. 3 Standardized
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
Instruction Manual. Standard Head Assembly Model: Z-STX # for
Instruction Manual for Standard Head Assembly Model: Z-STX #510-2200 Introduction The Gesswein Power Hand 2X Z-STX Head Assembly is engineered and manufactured to a high degree of precision and will give
SERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
WRIST ARTHROSCOPY SYSTEM
DESCRIPTION 1 1 lot 10,648,751.67 Brand new, not reconditioned including its Parts & Accessories 1. Wrist Arthroscope a. HD wide angle 30-degree small joint arthroscope i. One (1) short scope (1 piece)
Shaver System EBERLE C2
Shaver System C2 Shaver System EBERLE C2 y n a m r e G n i M ade Control Unit Hand Piece Foot Switch Universal Motor Hand Piece Shaver System 913000 Control Unit 913001 Foot Switch 913003-2 Control Unit
MILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
Surgical Handpiece. Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93. S-Max SG M OM-C0425E
Surgical Handpiece Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93 S-Max SG20 09.03.01 M OM-C0425E 001 for X-SG20L,SG20 This handpiece is used only for the Surgical Unit with Torque Calibration
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
microspeed uni Aesculap Get the speed you need Aesculap Power Systems
Aesculap Get the speed you need microspeed uni Aesculap Power Systems Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone
Drilling & Tapping Wide selection from a single source. Durable designs.
Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to
Cannulated Screws Ø 3.5 mm / 4.5 mm
Cannulated Screws Ø / 4.5 mm Table of contents Implants Ø 4 Implants Ø 4.5 mm 6 Operation technique - Ø Cannulated Screws 9 Reduce fracture and insert guide wire 9 Determine the screw length 9 Drilling
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
Instruction Manual for the Pneumatic Power Instrument System
Instruction Manual for the Pneumatic Power Instrument System Instruction Manual for Pneumatic Handpieces TABLE OF CONTENTS Introduction and Markings 1 Foot Control 3 Assembly 4 Handpieces 5-20 General
Instruments for Removing DePuy Synthes Screws. Screw Removal Set
Instruments for Removing DePuy Synthes Screws Screw Removal Set Surgical Technique Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal
Back to health. Back to work. Back to life.
TECHNIQUE Back to health. Back to work. Back to life. U PLUS 90 INSTRUMENTATION OVERVIEW W&H IMPLANTMED POWER UNIT OVERVIEW Low-profile Primary Guides Compresses the U-clip to match rib thickness Clamps
Midwest Products Retail Price List. Effective October 1, 2017
Midwest Products Retail Price List 2018 Effective October 1, 2017 Midwest Products 2018 Retail Price List Pricing Effective October 1, 2018 Contact information for Midwest products: CUSTOMER SERVICE: 800-800-2888
Power Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
The Power Carver System
The Power Carver System 10112 $349.00 Power Carver Handpiece Only We are proud to feature this new air tool. We feel it is the most reliable egg carving tool in the industry. Some of the advantages are:
CHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
Technique Chart. DHS/DCS One-Step Insertion Wrench. For use with DHS/DCS One-Step Lag Screws.
Technique Chart DHS/DCS One-Step Insertion Wrench. For use with DHS/DCS One-Step Lag Screws. DHS/DCS One-Step Insertion Wrench DHS Triple Reamer (338.13) Assembly 338.10 8.0 mm Drill Bit 338.11 DHS Reaming
MASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
Cutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
7.0 mm Cannulated Screws
Part of the DePuy Synthes Cannulated Screw System 7.0 mm Cannulated Screws Surgical Technique Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique
Thread Repair & Thread Protection
Thread Repair & Thread Protection Screw Thread Inserts, Kits & Components for Industrial Maintenance, Repair and Overhaul Bulletin 998 C E R T I F I E D ISO 9001 AS 9100 TS 16949 ISO 14001 The HELI-COIL
15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
Grand Slam 380 and Grand Slam 380XL Installation Instructions
Grand Slam 380 and Grand Slam 380XL Installation Instructions Patent #7,114,283 GS-380 GS-380XL Taco Metals, Inc., info@tacomarine.com TacoMarine.com Thank you for purchasing a quality Taco Marine product.
TOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
8.10 Drill Grinding Device
8.10 Drill Grinding Device Special Accessories 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed
Holemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
General Lathe Set Up. Lathe Manual JH compilation
General Lathe Set Up Lathe Manual JH compilation 3.3.06 1 Machine Shop Safety... 2 General Lathe Set-Up... 4 Facing, Turning, and Shouldering:... 4 Three things matter with your tool bit position:... 5
FOUNDATION AUGERS. FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs
FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited for your project. The above triangles
The new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
POWER CARVERS/ACCESSORIES
16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes
installation guide 1 GUIDE#: pwb-assault-004
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
RTI TECHNOLOGIES, INC.
RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
MEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET. for Intramedullary Nail System
MEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET for Intramedullary Nail System introducing ourselve Manufacturer of surgical implants and medical devices. Solutions for patient orthopaedic
Technique Guide. Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5.
Technique Guide Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5. Table of Contents Introduction Quadrilateral Surface Plates 3.5 2 AO Principles 4 Indications 5 Surgical Technique
Interproximal Reduction and Separation
Interproximal Reduction and Separation Our Strength is our Service Ortho-Care (UK) Ltd. Facsimile: 01274 734446. Website: www.orthocare.co.uk. Email: info@orthocare.co.uk 17 AIR ROTOR STRIPPING - Adult
1.5 MM LCP SYSTEM. For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE
1.5 MM LCP SYSTEM For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION 1.5 mm LCP System 2 AO Principles 4 SURGICAL TECHNIQUE Reduce Fracture
MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
DIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
Drill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III Hi Temp (Red) fan blades are of single
Tuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
The new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are
TECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
Various Bolt Removal Process
Various Bolt Removal Process Introduction I have been climbing for over 25 years. The first bolt I placed in 1987 was a 5/16 Rawls carbon steel, split shank, button head in sandstone. Certainly the wrong
Various Bolt Removal Process
Various Bolt Removal Process Introduction I have been climbing close to 30 years. The first bolt I placed in 1987 was a 5/16 Rawls carbon steel, split shank, button head in sandstone. Certainly the wrong
Premium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
Tuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
Pipe Cutters (Metal) BT The BT is designed to fit the Berkley BT-5020 Power Threader as well as the RIDGID Model No. 300 and 535.
Berkley Tool is proud to offer the most comprehensive selection of replacement parts and accessories for pipe threading and cutting equipment. Berkley s high quality products are also designed as replacement
QUANTUM SPINAL. Presenter: John Perala, Product Manager. August 14, 2006
QUANTUM SPINAL ROD SYSTEM Key Features Presenter: John Perala, Product Manager August 14, 2006 Fixed Screw Sizes 475 4.75, 25-40mm 7.75, 30-50mm 5.75, 25-40mm 875 8.75, 30-40mm 6.75, 30-50mm Polyaxial
CHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1
CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter
Tuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
THE FULL LINE METAL SPECIALISTS
PRECISION METALS THE FULL LINE METAL SPECIALISTS 6917 West 59th Street Chicago, Illinois 60638 Phone 773/586-8503 Fax 773/586-8556 www.ksmetals.com THE USES ARE ENDLESS!!! Hobby, Craft, DIY, Artist, Architecture,