POWER. Rethinking Possibilities, Reshaping Lives
|
|
- Gabriel Ryan
- 6 years ago
- Views:
Transcription
1 POWER Rethinking Possibilities, Reshaping Lives
2 Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules Wire/Pin Driver Modules Lever Arm Motor Unit (LAMU) Modules Saw Modules p. 2 p. 3 p. 4 p. 5 p. 6 p. 7 p. 8 p. 9 General Information OsteoPower Irrigation Accessories OsteoPower Miscellaneous Accessories Burs & Drills Sagittal and Oscillating Saw Blades Reciprocating Saw Blades p. 10 p. 11 p p. 16 p. 17 1
3 General Information Name: Pager: Cell: OsteoMed LP 3885 Arapaho Road Addison, TX U.S.A. Customer Service: Main: Fax:
4 INTRODUCTION The OsteoPower Modular Handpiece System incorporates advanced technology in the design and manufacturing of surgical power tools. From the unique ergonomic shape of the motor unit to the high power DC brushless motor and modular handpiece components, OsteoPower combines user friendly features with incredible performance and dependability. SYSTEM COMPONENTS The OsteoPower System is comprised of Handpiece Modules, Motor Unit(s) and Cord(s), a Power Control Console (with or without irrigation), and Footswitches as well as many other accessories. DESCRIPTIONS Power Control Console (PCC): Electronic Control and Power Supply unit for Motor Unit(s) Motor Unit (MU): A high speed, high torque motor with a radel housing which is connected to the PC and converts power to the drills, saws, or drivers. Footswitch: A foot control unit which is connected to the PCC to control the speed and direction of the MU. 1:1 Straight Drill: A high speed module which is attached to the MU for cutting, drilling, and deburring. 1:1/20:1/80:1 Contra Angle Drills: Angular drills with or without gear reduction for cutting, drilling, and tapping. General Information 4:1 Universal Pilot Drill: A low speed module for pilot drilling that will accept OsteoMed, J-latch, and long D-latch shank drills. Reciprocating Saw: A module for cutting with reciprocating motion. Oscillating Saw: A module for cutting with oscillating motion. V.R.O. Saw: A module for cutting with oscillating motion. Sagittal Saw: A module for cutting with sagittal motion. Wire/Pin Driver: A slow speed module to drive different sizes of wire or pins and for drilling. 3
5 Power Control Console Part Number Description Power Control Console 2i with Irrigation Power Control Console 2i with Irrigation, English Voice Power Control Console 2i with Irrigation, Italian Voice Power Control Console 2i with Irrigation, Spanish Voice Power Control Console Power Control Console 2 English Voice Power Control Console 2 Italian Voice Power Control Console 2 Spanish Voice BMF Footswitch
6 Part Number Description Hand Controlled Motor Unit and Cord Lever Arm Motor Unit and Cord (LAMU) Series II Low Profile Motor Unit (Footswitch Only) Power Control Console
7 Handpiece Modules Part Number Description Series III Straight Drill :1 Contra Angle Drill :1 Contra Angle Drill :1 Contra Angle Drill, Low Speed :1 Universal Pilot Drill
8 Part Number Description Wire/Pin Driver, Body Only Wire/Pin Driver Module with Trigger, High Torque Jacob s Chuck ( Included) Jacob s Chuck Key A.O. Chuck w/ trigger Handpiece Modules
9 Part Number Description Wire/Pin Driver Body (LAMU) Wire/Pin Driver (LAMU) Jacobs Chuck (LAMU) A.O. Chuck (LAMU) Jacobs Key Handpiece Modules
10 Part Number Description Reciprocating Saw Sagittal Saw Oscillating Saw V.R.O. Saw OsteoGraftTM Soft Tissue Guard Attachment (Attaches to the Series Three Straight Drill P/N ) Handpiece Modules
11 Accessories Part Number Description IV Pole for 2i (One included with every OsteoPowerTM 2i with Irrigation) Contra Angle Irrigation Nozzle Contra Angle Irrigation Nozzle (LAMU) Single Silicone Tubing Set, 12 ft. (Clips Included) Dual Silicone Tubing Set, 12 ft. (Clips Included) Autoclavable Tubing Clips, 12/bag (not shown) Irrigation Tubing (1 Foot Section) Bifurcated Contra Irrigation Tubing, Internal / External Reciprocating Saw Irrigation Nozzle Reciprocating Saw Irrigation Nozzle (LAMU) Series III Straight Drill Irrigation Nozzle Series III Straight Drill Irrigation Nozzle (LAMU) OsteoGraftTM Irrigation Tubing Irrigation Accessories for , & Contra Angles Irrigation Y-Manifold (3 PCS) Internal Bur Cooling Tube Spray Clip for & Spray Clip for or (LAMU) or (LAMU) or (LAMU) 10
12 Part Number Description Wrench, 4:1 Bur Guard and Contra Angles Reciprocating Saw Wrench Set W/P Driver Silicone Nose Lubricant & Conditioner Cleaning Spray Aerosol Nozzle Lubrication Sleeve for Series III Straight Drill Lubrication Sleeve for Universal Drill W/P Driver/Jacobs Chuck/AO Chuck Nozzle or (LAMU) or (LAMU) Additional Accessories (not shown): Rolling Briefcase OsteoPowerTM autoclave tray Hospital Grade AC Power Cord AC Power Cord (EUROPE) AC Power Cord (AUSTRALIA) AC Power Cord (ITALY) AC Power Cord (UNITED KINGDOM) AC Power Cord (JAPAN) Short Bur Guard, 4:1 Universal Pilot Drill Medium Bur Guard, 4:1 Universal Pilot Drill Long Bur Guard, 4:1 Universal Pilot Drill Irrigation Bag Spike Accessories For or
13 1:1 Straight Drill mm #701 tapered SP mm #702 Tapered SP mm #703 Tapered SP mm #701 Straight Bur, Blade Guide Diamond Burs Fissure Burs mm #560 Straight mm #1703 Long Shaft Round Tip, SP 3.0mm mm #703 Round Tip SP mm #702 Long Tip SP SP 3.5mm mm #702 Long Shaft SP mm #703 Long Tip SP SP 4.0mm mm #703 Long Shaft SP mm #1703 Long Tip SP SP 4.5mm SP #1/4 Round, 0.5mm SP #4 Round, 1.4mm #6 Round, 1.8mm SP #8 Round, 2.3mm SP Round Burs #8 Round, 2.3mm, Long Shaft SP #10 Round, 2.7mm SP SP 4.0mm Round SP 5.0mm Round SP 6.0mm Round SP 7.0mm Round Oval Burs SP 4.0mm SP 4.0mm, Long Shaft SP = Single Sterile Pack 12
14 1:1 Straight Drill Swanson Pilot Point SP 4.0mm Reamer Pineapple Bur SP 6mm Shannon Bur SP 2.3mm Drill Bit Fissure Round Wire Pass Drill Lindemann Burs SP 1.6mm SP 1.0mm mm # 8 Round mm # mm #703 Long For 1.2mm Screw For 1.6mm Screw SP 1.6mm, Long Shaft SP 1.5mm For 2.0/2.4mm Mini/Maxi Screw Contra Angle Drills 1:1-18:1-100: SP 1.6mm, Long Shaft 455 Stainless Steel SP 2.0mm Universal Disc Adapter OsteoGraft Cutting Wheel (Mandrel) SP 0.25mm Thickness SP 0.5mm Thickness Bur, Blade Guide For 2.0/2.4mm Mini/Maxi Screw Not to be used in power system SP = Single Sterile Pack 13
15 Pilot Drill Diameter 4:1 Universal Pilot Drill 1:1 Straight Drill - Contra Angle Drills Bur, Blade Guide For 1.2mm Screw For 1.6mm Screw mm mm mm, 4mm Stop mm mm mm, 3mm Stop mm, 4mm Stop mm, 5mm Stop mm mm, 4mm Stop mm, 8mm Stop mm, 4mm Stop mm, 12mm Stop mm mm, 4mm Stop mm, 12mm Stop mm, 16mm Stop mm mm, 4mm Stop mm, 6mm Stop mm, 8mm Stop, BFS mm, 6mm Stop, BFS mm, 4mm Stop, BFS mm, 12mm Stop mm, 16mm Stop mm, 4mm Stop Manual OsteoPower OsteoPower J-Latch J-Latch D-Latch mm, Extended Length mm D-Latch 14
16 Pilot Drill Diameter 4:1 Universal Pilot Drill 1:1 Straight Drill - Contra Angle Drills mm mm mm, Long mm, Long Calibrated, Mandible mm, 6mm Stop mm, 4mm Stop OsteoPower Manual mm, Mandible For 2.0mm Screw mm mm mm, Long mm, 6mm Stop mm, 4mm Stop J-Latch Bur, Blade Guide mm, Long Calibrated mm, Long, Mandible System mm, 16mm Stop mm, 6mm Stop mm Pilot Drill D-Latch mm Manual mm mm, Long mm Pilot Drill OsteoPower For 2.4mm Screw mm, Long, Mandible System mm, 12mm Stop mm, Long J-Latch mm, Long Calibrated mm, Long Mandible System mm, 16mm Stop mm, Calibrated D-Latch mm, 10mm 15
17 Sagittal / Oscillating Saw Blades V.R.O. Saw Blades SP Width: 4mm / Cut Depth: 25mm SP Width: 10mm / Cut Depth: 27mm SP Width: 10mm / Cut Depth: 10mm SP Width: 10mm / Cut Depth: 28mm Bur, Blade Guide Oscillating / Sagittal SP Width: 6mm / Cut Depth: 10mm SP Width: 6mm / Cut Depth: 14mm SP Width: 6mm / Cut Depth: 19mm SP Width: 10mm / Cut Depth: 29mm SP Width: 10mm / Cut Depth: 39mm SP Width: 19mm / Cut Depth: 29mm SP Width: 10mm / Cut Depth: 19mm SP Width: 7mm / Cut Depth: 18mm SP Blade, Sag/Osc 6mm/5mm, Sterile SP Blade, Sag/Osc 6mm/26mm, Sterile Vertical Ramus Osteotomy SP 7mm, 0.6mm Thick SP 12mm, 0.6mm Thick SP 12mm, 0.38mm Thick SP = Single Sterile Pack 16
18 Reciprocating Saw Blades Inferior Osteotomy Blades Rasp Tapered Straight Arched SP Length: 12mm / Thickness: 0.6mm SP Length: 17mm / Thickness: 0.6mm SP Length: 14.5mm / Thickness: 0.4mm SP Length: 15.7mm / Thickness: 0.4mm SP Length: 32.7mm / Thickness: 0.4mm SP Length: 26.3mm / Thickness: 0.4mm SP Length: 26.3mm / Thickness: 0.4mm SP Length: 26.3mm / Thickness: 0.6mm SP Length: 26.3mm / Thickness: 0.6mm SP Cross Cut SP Cross Cut, Short SP Right and Left Side Included Bur, Blade Guide SP = Single Sterile Pack 17
19 POWER Rethinking Possibilities, Reshaping Lives Arapaho Road, Addison, TX USA Customer Service: (800) Phone: (972) Fax:(800) P/N Rev.E
POWER. Rethinking Possibilities, Reshaping Lives
POWER Rethinking Possibilities, Reshaping Lives General Information Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules
More informationSmall Bone Power System
236041 Zimmer B 7/10/06 3:14 PM Page 1 Manufactured by: Distributed by: 236041 Zimmer B 7/10/06 3:14 PM Page 2 236041 Zimmer B 7/10/06 3:14 PM Page 3 Contents Introduction 2 High Speed Drill 3 Medium Speed
More informationAesculap Power Systems HiLAN XS
Aesculap Power Systems HiLAN XS Pneumatic High Speed Power System HiLAN XS size redefined HiLAN XS Micro design perfection in every detail Revolutions start with small things. The extremely small HiLAN
More informationTotal Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM NEURO SPINE ENT SPORTS MED PLASTICS GEN.
NEURO SPINE ENT SPORTS MED PLASTICS GEN. ORTHOPEDICS ORAL/MAX Total Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM Attachments INNOVATION WITH ATTITUDE Burs UNIVERSAL
More informationmicrospeed uni Aesculap Get the speed you need Aesculap Power Systems
Aesculap Get the speed you need microspeed uni Aesculap Power Systems Relax the power is in your hand. Ergonomic, lightweight and quiet - exceptional! With a weight of under g and an out stan ding design,
More informationMicroSurgical Power Tools
MicroSurgical Power Tools C.O.R.E Consolidated Operating Room Equipment Power Simplicity Versatility Customized Performance Standardization MicroSurgical Power Tools Consolidated Operating Room Equipment
More informationpowerful, smart & reliable
HIGH PERFORMANCE BRUSHLESS MICROMOTOR WITH PRECISE TORQUE CONTROL powerful, smart & reliable Powerful Partners PRM014E Ver.2 10.04.02.A Contents NSK COMPANY INTRODUCTION P2 3 PRODUCT LINE UP P4 5 CONTROL
More informationstate of mind, state of the art
TOTAL SURGICAL SYSTEM state of mind, state of the art Powerful Partners Powerful Partners NSK Handpieces and The Human Hand Speed and torque properties are often considered the main criteria for judging
More informationAesculap Power Systems microspeed uni. Get the speed you need
Aesculap Power Systems microspeed uni Get the speed you need Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone in small
More informationPrimado2 Product Lineup
PR-M033E Ver.1 12.04.015.A Primado2 Product Lineup Slim Motor Series Micro Bone Saw Series High Torque Motor Series Primado2 Slim Motor P12 Primado2 Micro Bone Saw P32-34 Primado2 High Torque Motor P20
More informationStraight and angled handpieces for surgery
Straight and angled handpieces for surgery Surgical instruments - technical characteristics PM RM 1122 / 1:1 ratio REF 1600206-001 REF 1600340-001 REF 1600341-001 PM AM 10121 / Reducing ratio of 10 REF
More informationPowered Instruments System Product Catalog
Powered Instruments System Product Catalog MicroPower Saw Micro100 Surgairtome M-CLASS BLADES Batteries Contents Ordering Information... 2 Product Support... 3 Product Support and Service Programs... 4
More informationAesculap ELAN 4. Surgeon`s Darlings for Precision, Performance and Pleasure.
Surgeon`s Darlings for Precision, Performance and Pleasure. Surgeon s Darlings for Precision and Performance Engineered in Germany. As a surgeon, I need to do the best job possible in order to maintain
More informationStraight and contra-angled handpieces
Microsaws The saws are provided with extra-thin blades which reduce bone loss to a minimum. The sagittal, osseoscalpel and oscillating saws are equipped with an irrigation tube integrated in the hand-grip.
More informationOPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 OSADA, INC.
OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 NEW Electric BRUSHLESS Laboratory MICROMOTOR Handpiece System SYSTEM FOR ORAL with SURGERY BRUSHLESS AND IMPLANT MICROMOTOR PREPARATIONS OSADA, INC. 30008436
More informationi'"fi fiil S"'sii"l... Micro 700'* Surgery System, Tl;.e Advanced, reliable instruments for precision small-bone surgery.
Micro 700'* Surgery System, Tl;.e i'"fi fiil S"'sii"l... Advanced, reliable instruments for precision small-bone surgery. Lightweight and perfectly balanced, each Micro 100 ' handpiece gives you better
More informationSynea Vision contra-angle and straight handpieces Dental handpieces with ceramic ball bearings (WK-99 / WK-93) and compact glass rod light
Restoration & Prosthetics Synea Vision turbine handpieces Dental turbines integral ceramic ball bearings and optimum cooling of 5-fold spray with Roto Quick connection with Multiflex connection TK-00 L
More informationTable of Contents 2-6. Introduction. Indications Surgical Technique. Ordering Information 15-24
Table of Contents Introduction Product information ExtremiFix Midsize Large Screw Offering Headless Screw Characteristics Design Features & Benefits Instrumentation Technical Details Calibrated Drill Bits
More informationPowered Instruments System Product Catalog. Hall LITHIUM BATTERIES M-CLASS BLADES HALL SMALL BONE HANDPIECE SURGAIRTOME TWO
Hall Powered Instruments System Product Catalog HALL MICROPOWER + HALL MICRO 100 SMALL BONE HANDPIECE SURGAIRTOME TWO M-CLASS BLADES HALL LITHIUM BATTERIES Contents Ordering Information...2 Product Support...3
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationOmega Surgical Contact Info. Table of Contents. Introduction 1.0. Omega Signature Series Burs 1.1. Omega UltraLite Burs 2.1
Surgical Contact Info Table of Contents Section Page Introduction 1.0 TM Signature Series Burs 1.1 UltraLite Burs 2.1 DiaMax Oscillating s 3.1 Medtronic Xomed Replacement Burs 4.1 Linvatec /Zimmer Replacement
More information53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
More informationCutting Accessories Micro Burs
Cutting Accessories Micro Burs CORE Micro Drill 5400-15 CORE Micro Drill Micro Drill Attachments 5100-15-250 MD Series Straight Attachment 5100-15-270 MD Series Long Straight Attachment 5100-15-252 MD
More informationShaver System EBERLE C2
Shaver System C2 Shaver System EBERLE C2 y n a m r e G n i M ade Control Unit Hand Piece Foot Switch Universal Motor Hand Piece Shaver System 913000 Control Unit 913001 Foot Switch 913003-2 Control Unit
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More information4.0 CANNULATED SCREW SYSTEM
Surgical Technique 4.0 CANNULATED SCREW SYSTEM Surgical technique Table of contents Design features...2 Indications...3 Surgical technique...4 Inserting the screw...4 Extracting the screw...6 Catalog
More informationInterproximal Reduction
Interproximal Reduction 10.0 mm 10.0 mm 1.0 mm 0.39 mm Fine Grit Long Item #: 8859-31-010 1.0 mm 0.45 mm Medium Grit Long (Blue Color ID) Item #: 859-31-010 1 pack... $ 46.95/pk 3 or more... $ 44.95/pk
More informationmicrospeed uni Aesculap Get the speed you need Aesculap Power Systems
Aesculap Get the speed you need microspeed uni Aesculap Power Systems Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone
More informationWRIST ARTHROSCOPY SYSTEM
DESCRIPTION 1 1 lot 10,648,751.67 Brand new, not reconditioned including its Parts & Accessories 1. Wrist Arthroscope a. HD wide angle 30-degree small joint arthroscope i. One (1) short scope (1 piece)
More informationThe Power Carver System
The Power Carver System 10112 $349.00 Power Carver Handpiece Only We are proud to feature this new air tool. We feel it is the most reliable egg carving tool in the industry. Some of the advantages are:
More informationSurgical Handpiece. Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93. S-Max SG M OM-C0425E
Surgical Handpiece Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93 S-Max SG20 09.03.01 M OM-C0425E 001 for X-SG20L,SG20 This handpiece is used only for the Surgical Unit with Torque Calibration
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationKTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationTABLE OF CONTENTS TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...
Rev. 8 March 2005 SUBJECT TABLE OF CONTENTS PAGE TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...5 POLISHER OPERATION...6 MICROMOTOR
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationSERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationInstruments for Removing DePuy Synthes Screws. Screw Removal Set
Instruments for Removing DePuy Synthes Screws Screw Removal Set Surgical Technique Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal
More informationInstruction Manual. Standard Head Assembly Model: Z-STX # for
Instruction Manual for Standard Head Assembly Model: Z-STX #510-2200 Introduction The Gesswein Power Hand 2X Z-STX Head Assembly is engineered and manufactured to a high degree of precision and will give
More informationRush Machinery, Inc. Specification- Model 252 series Drill & Tool Grinders
I. Operational Features A. Drill & Tool Size Capacities 1. Drill Diameter Range: 3/32 (2.5 mm) to 2 (51 mm) 2. Tool Shanks: Straight Shanks: 3/32 (2.5mm) to 2 (51mm) diameter Morse Taper Shanks: to #5
More informationMetals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
More informationTechnique Guide. 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationMidwest Products Retail Price List. Effective October 1, 2017
Midwest Products Retail Price List 2018 Effective October 1, 2017 Midwest Products 2018 Retail Price List Pricing Effective October 1, 2018 Contact information for Midwest products: CUSTOMER SERVICE: 800-800-2888
More informationInstruction Manual for the Pneumatic Power Instrument System
Instruction Manual for the Pneumatic Power Instrument System Instruction Manual for Pneumatic Handpieces TABLE OF CONTENTS Introduction and Markings 1 Foot Control 3 Assembly 4 Handpieces 5-20 General
More informationRush Machinery, Inc. Specification- Model 382S series Drill & Tool Grinders
I. Operational Features A. Drill & Tool Size Capacities 1. Drill Diameter Range: 3/16 (5mm) to 3-1/8 (80mm) 2. Tool Shanks: Straight Shanks: 3/16 (5mm) to 3-1/8 (80mm) diameter Morse Taper Shanks: to #6
More informationPOWER CARVERS/ACCESSORIES
16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes
More informationSURGICAL TECHNIQUE GUIDE
SURGICAL TECHNIQUE GUIDE DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if
More informationSpeedTip CCS 5.0, 7.0
SURGICAL TECHNIQUE STEP BY STEP SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws APTUS 2 SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws SpeedTip CCS 5.0, 7.0 Cannulated Compression Screw 3 SpeedTip
More informationBack to health. Back to work. Back to life.
TECHNIQUE Back to health. Back to work. Back to life. U PLUS 90 INSTRUMENTATION OVERVIEW W&H IMPLANTMED POWER UNIT OVERVIEW Low-profile Primary Guides Compresses the U-clip to match rib thickness Clamps
More information1.5 MM LCP SYSTEM. For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE
1.5 MM LCP SYSTEM For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION 1.5 mm LCP System 2 AO Principles 4 SURGICAL TECHNIQUE Reduce Fracture
More informationHYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE. a quality product built for sustained accuracy lasting performance
D HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINE a quality product built for sustained accuracy lasting performance MANEX HYDRAULIC UNIVERSAL AND TOOL GRINDING MACHINES Mod. No. 1 - No. - No. 3 Standardized
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationMILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
More informationInterproximal Reduction and Separation
Interproximal Reduction and Separation Our Strength is our Service Ortho-Care (UK) Ltd. Facsimile: 01274 734446. Website: www.orthocare.co.uk. Email: info@orthocare.co.uk 17 AIR ROTOR STRIPPING - Adult
More informationModel LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationModel LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
More informationGrand Slam 380 and Grand Slam 380XL Installation Instructions
Grand Slam 380 and Grand Slam 380XL Installation Instructions Patent #7,114,283 GS-380 GS-380XL Taco Metals, Inc., info@tacomarine.com TacoMarine.com Thank you for purchasing a quality Taco Marine product.
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationMEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET. for Intramedullary Nail System
MEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET for Intramedullary Nail System introducing ourselve Manufacturer of surgical implants and medical devices. Solutions for patient orthopaedic
More informationRestoration & Prosthetics
Restoration & Prosthetics High Speed Handpieces LED Couplings Low Speed Handpieces Clinical Micromotors Others PR-D718A Ver.2 12.00.00.0 Ti-Max X Series >>> P. 3-4 LED Couplings >>> P. 13 Ti-Max Z Series
More informationsolid titanium handpieces
Ti-MAX Ti SERIES FROM NSK OPTIC & NON-OPTIC LOW SPEED HANDPIECES SOLID TITANIUM solid titanium handpieces SLIM LINE Smart design Smallest head & Ultra Slim neck Excellent operator dexterity Evolution of
More informationLISTA DE REFACCION MODELO LS1017L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
More informationEasy Engineering Guide
Index: Unleash Your Creativity! Page 1: The Basics Page 2: Sorting Dowels Page 3: Measuring and Cutting Page 4: Dowels and Holes (Reaming Holes) Page 5: Reaming, Screws, Slide-Stop Material Page 6: Hydraulics/Pneumatics
More informationApril 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
More informationCannulated Screws Ø 3.5 mm / 4.5 mm
Cannulated Screws Ø / 4.5 mm Table of contents Implants Ø 4 Implants Ø 4.5 mm 6 Operation technique - Ø Cannulated Screws 9 Reduce fracture and insert guide wire 9 Determine the screw length 9 Drilling
More informationLISTA DE REFACCION MODELO LS1018L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
More informationWind Pump Construction
What Will You Need? Page 1 The following components can be found in your kit, and are needed to build one wind pump: 50 Tooth Gear* 40 Tooth Gear* 20 Tooth Gear* 10 Tooth Gear* Wheel Hub 300mm (~12in)
More informationMACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
More information8.10 Drill Grinding Device
8.10 Drill Grinding Device Special Accessories 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed
More informationParts list. From Product number xx MARCH SVP Worldwide - All rights reserved.
Parts list 01 SVP Worldwide - All rights reserved. From Product number 971-xx 0 MARCH 01 A 1 9 7 8 10 1 11 1 1 1 19 18 17 1 0 1 1 7 8 0 1 1 9 1 19810 PRE -TENSION UNIT 17901 REEL PIN 1701 SPRING, REEL
More informationUNIDRIVE S III ARTHRO
ART 46-2 07/2013-E UNIDRIVE S III ARTHRO Your Complete Solution Arthroscopy UNIDRIVE S III ARTHRO Your Complete Solution Arthroscopy Whether the application is knee, shoulder, hip or a small joint, the
More informationSMALL GAUGE NIBBLER ASSEMBLY & OPERATING INSTRUCTIONS Mission Oaks Blvd., Camarillo, CA Visit our Web Site at
SMALL GAUGE NIBBLER 91739 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2004 by Harbor Freight Tools. All rights reserved.
More informationTitanium Modular Hand System. For fractures, replantations and reconstruction of the hand.
Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Plates precontoured for anatomic fit Instruments colorcoded for easy recognition Modules for 1.0 mm to 2.4 mm
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationRTI TECHNOLOGIES, INC.
RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally
More informationtools pendant drills 572 orderline: milbro pendant drills tools
milbro Milbro Pendant Drill: 999 AVX Milbro Pendant Drill with slip joint fitting, hanger & base plate. 12,000 RPM with plastic foot control. (separate hand piece needed) 270.39 999 87B With fixed hand
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
More informationBEAST THE. Tube and Pipe Notcher Operating Instructions. Notches In Bends Straight Notches. Angled Notches. Offset Notches
Copyright (c) 2007 J D SQUARED INC. www.jd2.com THE BEAST Tube and Pipe Notcher Operating Instructions Notches In Bends Straight Notches Angled Notches PATENT PENDING Offset Notches Assembly After unpacking
More informationLag Screw Device TECHNIQUE GUIDE. Indicated for symphyseal fracture fixation of the mandible. Instruments and implants approved by the AO Foundation
Lag Screw Device TECHNIQUE GUIDE Indicated for symphyseal fracture fixation of the mandible Instruments and implants approved by the AO Foundation Lag Screw Device Indicated for symphyseal fracture fixation
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationDrilling & Tapping Wide selection from a single source. Durable designs.
Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to
More informationOPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS. foot & ankle applications
OPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS foot & ankle applications INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 6 OPERATIVE
More informationCore drilling technology catalogue
Core drilling technology catalogue ruko Core drilling machines PreMiUMlineMline RS125e RS126e RS140e RSH1300 BASiCline RS5e RS10 RS25e RS40e A10 RS125e 2 overview of symbols Magnetic clamping force length
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationTapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y
W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring
More informationPace Catalog. SX-70 Handpiece. SX-70 Replacement Parts Diagram. SX-70 parts Diagram See page 12 for the description of parts.
SX-70 Handpiece SX-70 Replacement Parts Diagram SX-70 parts Diagram See page 12 for the description of parts page 11 SX-70 Handpiece SX-70 Replacement Parts ITEM 1 3 10 11 12 14 14 16 19 23 24 26 27 28
More informationInstruments for removing Synthes screws. Screw Extraction Set. Handling Technique
Instruments for removing Synthes screws Screw Extraction Set Handling Technique Image intensifier control This description alone does not provide sufficient background for direct use of DePuy Synthes products.
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
More informationCHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1
CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter
More informationMINI INSTRUMENTS & IMPLANTS
Page 1 MINI INSTRUMENTS & IMPLANTS Page 2 JACOB CHUCK DRILL BITS MIS-001 1.1MM 45MM LENGTH MIS-002 1.5MM 70MM LENGTH MIS-003 2.0MM 85MM LENGTH MIS-004 2.7MM 85MM LENGTH QUICK COUPLING DRILL BITS MIS-005
More information